Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-12-29 17:25:38 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
linux-stable/net/batman-adv/soft-interface.c

1148 lines
32 KiB
C
Raw Permalink Normal View History

batman-adv: Add SPDX license identifier above copyright header The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-11-19 14:05:11 +00:00
// SPDX-License-Identifier: GPL-2.0
batman-adv: Drop publication years from copyright info The batman-adv source code was using the year of publication (to net-next) as "last" year for the copyright statement. The whole source code mentioned in the MAINTAINERS "BATMAN ADVANCED" section was handled as a single entity regarding the publishing year. This avoided having outdated (in sense of year information - not copyright holder) publishing information inside several files. But since the simple "update copyright year" commit (without other changes) in the file was not well received in the upstream kernel, the option to not have a copyright year (for initial and last publication) in the files are chosen instead. More detailed information about the years can still be retrieved from the SCM system. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-12-31 23:00:01 +00:00
/* Copyright (C) B.A.T.M.A.N. contributors:
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
*
* Marek Lindner, Simon Wunderlich
*/
#include "soft-interface.h"
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include "main.h"
#include <linux/atomic.h>
#include <linux/byteorder/generic.h>
#include <linux/cache.h>
#include <linux/compiler.h>
batman-adv: Migrate to linux/container_of.h The commit d2a8ebbf8192 ("kernel.h: split out container_of() and typeof_member() macros") introduced a new header for the container_of related macros from (previously) linux/kernel.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-21 16:14:44 +00:00
#include <linux/container_of.h>
batman-adv: Move batadv_sum_counter to soft-interface.c The function batadv_sum_counter is only used in soft-interface.c and has no special relevance for main.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-21 23:30:10 +00:00
#include <linux/cpumask.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/errno.h>
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
#include <linux/etherdevice.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/ethtool.h>
batman-adv: include gfp.h for GFP_* defines The linux/gfp.h provides the GFP_ATOMIC and GFP_KERNEL define. It should therefore be included instead of linux/fs.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-11-19 16:12:02 +00:00
#include <linux/gfp.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/if_ether.h>
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
#include <linux/if_vlan.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/jiffies.h>
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
#include <linux/kref.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/list.h>
batman-adv: Revert "Drop lockdep.h include for soft-interface.c" The commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes") reverts the commit ab92d68fc22f ("net: core: add generic lockdep keys"). But it forgot to also revert the commit 5759af0682b3 ("batman-adv: Drop lockdep.h include for soft-interface.c") which depends on the latter. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-05-06 20:13:30 +00:00
#include <linux/lockdep.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/netdevice.h>
batman-adv: Use includes instead of fwdecls While it can be slightly beneficial for the build performance to use forward declarations instead of includes, the handling of them together with changes in the included headers makes it unnecessary complicated and fragile. Just replace them with actual includes since some parts (hwmon, ..) of the kernel even request avoidance of forward declarations and net/ is mostly not using them in *.c file. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-24 18:11:17 +00:00
#include <linux/netlink.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include <linux/percpu.h>
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
batman-adv: Drop implicit creation of batadv net_devices The sysfs code in batman-adv was could create a new batadv interfaces on demand when a string (interface name) was written to the batman-adv/mesh_iface file. But the code no longer exists in the current batman-adv codebase. The helper code to implement this behavior must be considered as unused and can be dropped. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-06-01 21:40:16 +00:00
#include <net/net_namespace.h>
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
#include <net/netlink.h>
batman-adv: Convert packet.h to uapi header The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 09:17:41 +00:00
#include <uapi/linux/batadv_packet.h>
batman-adv: Add gateway mesh genl configuration The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-23 12:15:00 +00:00
#include <uapi/linux/batman_adv.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
batman-adv: move bat_algo functions into a separate file The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-15 09:07:44 +00:00
#include "bat_algo.h"
batman-adv: add basic bridge loop avoidance code This second version of the bridge loop avoidance for batman-adv avoids loops between the mesh and a backbone (usually a LAN). By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. With this patch, batman recognizes backbone gateways, nodes which are part of the mesh and backbone/LAN at the same time. Each backbone gateway "claims" clients from within the mesh to handle them exclusively. By restricting that only responsible backbone gateways may handle their claimed clients traffic, loops are effectively avoided. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:19 +00:00
#include "bridge_loop_avoidance.h"
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include "distributed-arp-table.h"
#include "gateway_client.h"
#include "hard-interface.h"
#include "multicast.h"
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 10:12:38 +00:00
#include "network-coding.h"
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 17:40:28 +00:00
#include "send.h"
#include "translation-table.h"
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Add kernel-doc to externally visible functions According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:53 +00:00
/**
* batadv_skb_head_push() - Increase header size and move (push) head pointer
* @skb: packet buffer which should be modified
* @len: number of bytes to add
*
* Return: 0 on success or negative error number in case of failure
*/
batman-adv: Prefix soft-interface non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:38 +00:00
int batadv_skb_head_push(struct sk_buff *skb, unsigned int len)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
int result;
batman-adv: Reformat multiline comments to consistent style batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:43 +00:00
/* TODO: We must check if we can release all references to non-payload
batman-adv: Fix "line over 80 characters" checkpatch warning Fixes: 242c1a28eb61 ("net: Remove useless function skb_header_release") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-09-28 15:16:51 +00:00
* data using __skb_header_release in our skbs to allow skb_cow_header
* to work optimally. This means that those skbs are not allowed to read
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
* or write any data which is before the current position of skb->data
* after that call and thus allow other skbs with the same data buffer
* to write freely in that area.
*/
result = skb_cow_head(skb, len);
if (result < 0)
return result;
skb_push(skb, len);
return 0;
}
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
static int batadv_interface_open(struct net_device *dev)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
netif_start_queue(dev);
return 0;
}
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
static int batadv_interface_release(struct net_device *dev)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
netif_stop_queue(dev);
return 0;
}
batman-adv: Move batadv_sum_counter to soft-interface.c The function batadv_sum_counter is only used in soft-interface.c and has no special relevance for main.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-21 23:30:10 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_sum_counter() - Sum the cpu-local counters for index 'idx'
batman-adv: Move batadv_sum_counter to soft-interface.c The function batadv_sum_counter is only used in soft-interface.c and has no special relevance for main.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-21 23:30:10 +00:00
* @bat_priv: the bat priv with all the soft interface information
* @idx: index of counter to sum up
*
* Return: sum of all cpu-local counters
*/
static u64 batadv_sum_counter(struct batadv_priv *bat_priv, size_t idx)
{
u64 *counters, sum = 0;
int cpu;
for_each_possible_cpu(cpu) {
counters = per_cpu_ptr(bat_priv->bat_counters, cpu);
sum += counters[idx];
}
return sum;
}
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
static struct net_device_stats *batadv_interface_stats(struct net_device *dev)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:31 +00:00
struct batadv_priv *bat_priv = netdev_priv(dev);
batman-adv: Use net_device_stats from struct net_device Instead of using a private copy of struct net_device_stats in struct batadv_priv, use stats from struct net_device. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-04-05 11:46:31 +00:00
struct net_device_stats *stats = &dev->stats;
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
stats->tx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_TX);
stats->tx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_TX_BYTES);
stats->tx_dropped = batadv_sum_counter(bat_priv, BATADV_CNT_TX_DROPPED);
stats->rx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_RX);
stats->rx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_RX_BYTES);
return stats;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
}
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
static int batadv_interface_set_mac_addr(struct net_device *dev, void *p)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:31 +00:00
struct batadv_priv *bat_priv = netdev_priv(dev);
batman-adv: change the MAC of each VLAN upon ndo_set_mac_address The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-31 11:48:10 +00:00
struct batadv_softif_vlan *vlan;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
struct sockaddr *addr = p;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
u8 old_addr[ETH_ALEN];
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
batman-adv: prefer ether_addr_copy to memcpy On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-21 23:42:11 +00:00
ether_addr_copy(old_addr, dev->dev_addr);
batman-adv: use eth_hw_addr_set() instead of ether_addr_copy() Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert batman from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19 16:39:27 +00:00
eth_hw_addr_set(dev, addr->sa_data);
batman-adv: Fix change mac address of soft iface. Into function interface_set_mac_addr, the function tt_local_add was invoked before updating dev->dev_addr. The new MAC address was not tagged as NoPurge. Signed-off-by: Def <def@laposte.net>
2012-09-20 12:56:13 +00:00
batman-adv: correct several typ0s in the comments Several typos have been corrected and some sentences have been rephrased Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-09 15:52:13 +00:00
/* only modify transtable if it has been initialized before */
batman-adv: change the MAC of each VLAN upon ndo_set_mac_address The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-31 11:48:10 +00:00
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
return 0;
rcu_read_lock();
hlist_for_each_entry_rcu(vlan, &bat_priv->softif_vlan_list, list) {
batadv_tt_local_remove(bat_priv, old_addr, vlan->vid,
batman-adv: Prefix translation-table non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:39 +00:00
"mac address changed", false);
batman-adv: change the MAC of each VLAN upon ndo_set_mac_address The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-31 11:48:10 +00:00
batadv_tt_local_add(dev, addr->sa_data, vlan->vid,
batman-adv: mark a local client as isolated when needed A client sending packets which mark matches the value configured via sysfs has to be identified as isolated using the TT_CLIENT_ISOLA flag. The match is mask based, meaning that only bits set in the mask are compared with those in the mark value. If the configured mask is equal to 0 no operation is performed. Such flag is then advertised within the classic client announcement mechanism. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:48 +00:00
BATADV_NULL_IFINDEX, BATADV_NO_MARK);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
}
batman-adv: change the MAC of each VLAN upon ndo_set_mac_address The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-31 11:48:10 +00:00
rcu_read_unlock();
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
return 0;
}
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: Don't increase MTU when set by user If the user set an MTU value, it usually means that there are special requirements for the MTU. But if an interface gots activated, the MTU was always recalculated and then the user set value was overwritten. The only reason why this user set value has to be overwritten, is when the MTU has to be decreased because batman-adv is not able to transfer packets with the user specified size. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-07-19 08:01:15 +00:00
struct batadv_priv *bat_priv = netdev_priv(dev);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* check ranges */
batman-adv: Avoid magic value for minimum MTU The header linux/if_ether.h already defines a constant for the minimum MTU. So simply use it instead of having a magic constant in the code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-07-27 08:13:42 +00:00
if (new_mtu < ETH_MIN_MTU || new_mtu > batadv_hardif_min_mtu(dev))
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
return -EINVAL;
net: annotate writes on dev->mtu from ndo_change_mtu() Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06 10:28:12 +00:00
WRITE_ONCE(dev->mtu, new_mtu);
batman-adv: Don't increase MTU when set by user If the user set an MTU value, it usually means that there are special requirements for the MTU. But if an interface gots activated, the MTU was always recalculated and then the user set value was overwritten. The only reason why this user set value has to be overwritten, is when the MTU has to be decreased because batman-adv is not able to transfer packets with the user specified size. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-07-19 08:01:15 +00:00
bat_priv->mtu_set_by_user = new_mtu;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
return 0;
}
batman-adv: Add dummy soft-interface rx mode handler We do not actually need to set any rx filters for the virtual batman soft interface. However a dummy handler enables a user to set static multicast listeners for instance. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-26 15:56:07 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_interface_set_rx_mode() - set the rx mode of a device
batman-adv: Add dummy soft-interface rx mode handler We do not actually need to set any rx filters for the virtual batman soft interface. However a dummy handler enables a user to set static multicast listeners for instance. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-26 15:56:07 +00:00
* @dev: registered network device to modify
*
* We do not actually need to set any rx filters for the virtual batman
* soft interface. However a dummy handler enables a user to set static
* multicast listeners for instance.
*/
static void batadv_interface_set_rx_mode(struct net_device *dev)
{
}
batman-adv: fix batadv_interface_tx()'s return type The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> [sven@narfation.org: fixed alignment] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-04-24 13:18:46 +00:00
static netdev_tx_t batadv_interface_tx(struct sk_buff *skb,
struct net_device *soft_iface)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
struct ethhdr *ethhdr;
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:31 +00:00
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct batadv_hard_iface *primary_if = NULL;
batman-adv: Prefix packet structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:30 +00:00
struct batadv_bcast_packet *bcast_packet;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
static const u8 stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00,
0x00, 0x00};
static const u8 ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00,
0x00, 0x00};
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
enum batadv_dhcp_recipient dhcp_rcp = BATADV_DHCP_NO;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
u8 *dst_hint = NULL, chaddr[ETH_ALEN];
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
struct vlan_ethhdr *vhdr;
batman-adv: refactoring gateway handling code Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-09-08 11:12:53 +00:00
unsigned int header_len = 0;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
int data_len = skb->len, ret;
batman-adv: bcast: queue per interface, if needed Currently we schedule a broadcast packet like: 3x: [ [(re-)queue] --> for(hard-if): maybe-transmit ] The intention of queueing a broadcast packet multiple times is to increase robustness for wireless interfaces. However on interfaces which we only broadcast on once the queueing induces an unnecessary penalty. This patch restructures the queueing to be performed on a per interface basis: for(hard-if): - transmit - if wireless: [queue] --> transmit --> [requeue] --> transmit Next to the performance benefits on non-wireless interfaces this should also make it easier to apply alternative strategies for transmissions on wireless interfaces in the future (for instance sending via unicast transmissions on wireless interfaces, without queueing in batman-adv, if appropriate). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-05-16 22:33:07 +00:00
unsigned long brd_delay = 0;
batman-adv: limit local translation table max size The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-27 07:33:25 +00:00
bool do_bcast = false, client_added;
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
unsigned short vid;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
u32 seqno;
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
int gw_mode;
batman-adv: mcast: remove now redundant single ucast forwarding The multicast code to send a multicast packet via multiple batman-adv unicast packets is not only capable of sending to multiple but also to a single node. Therefore we can safely remove the old, specialized, now redundant multicast-to-single-unicast code. The only functional change of this simplification is that the edge case of allowing a multicast packet with an unsnoopable destination address (224.0.0.0/24 or ff02::1) where only a single node has signaled interest in it via the batman-adv want-all-unsnoopables multicast flag is now transmitted via a batman-adv broadcast instead of a batman-adv unicast packet. Maintaining this edge case feature does not seem worth the extra lines of code and people should just not expect to be able to snoop and optimize such unsnoopable multicast addresses when bridges are involved. While at it also renaming a few items in the batadv_forw_mode enum to prepare for the new batman-adv multicast packet type. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-12-27 19:34:05 +00:00
enum batadv_forw_mode forw_mode = BATADV_FORW_BCAST;
batman-adv: mcast: don't send link-local multicast to mcast routers The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-01 05:27:13 +00:00
int mcast_is_routable = 0;
batman-adv: Fix potentially broken skb network header access The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-30 21:45:26 +00:00
int network_offset = ETH_HLEN;
batman-adv: Snoop DHCPACKs for DAT In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 15:52:53 +00:00
__be16 proto;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Prefix main enum with BATADV_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-03 20:19:22 +00:00
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped;
batman-adv: restructure rebroadcast counter into forw_packet API This patch refactors the num_packets counter of a forw_packet in the following three ways: 1) Removed dual-use of forw_packet::num_packets: -> now for aggregation purposes only 2) Using forw_packet::skb::cb::num_bcasts instead: -> for easier access in aggregation code later 3) make access to num_bcasts private to batadv_forw_packet_*() Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: Change num_bcasts to unsigned] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-02-17 10:17:07 +00:00
/* reset control block to avoid left overs from previous users */
memset(skb->cb, 0, sizeof(struct batadv_skb_cb));
treewide: replace dev->trans_start update with helper Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 14:33:13 +00:00
netif_trans_update(soft_iface);
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
vid = batadv_get_vid(skb, 0);
batman-adv: Force mac header to start of data on xmit The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-31 21:31:01 +00:00
skb_reset_mac_header(skb);
batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx path Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-19 21:22:45 +00:00
ethhdr = eth_hdr(skb);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Snoop DHCPACKs for DAT In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 15:52:53 +00:00
proto = ethhdr->h_proto;
switch (ntohs(proto)) {
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
case ETH_P_8021Q:
batman-adv: fix uninit-value in batadv_interface_tx() KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11 22:41:22 +00:00
if (!pskb_may_pull(skb, sizeof(*vhdr)))
goto dropped;
batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx path Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-19 21:22:45 +00:00
vhdr = vlan_eth_hdr(skb);
batman-adv: Snoop DHCPACKs for DAT In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 15:52:53 +00:00
proto = vhdr->h_vlan_encapsulated_proto;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: replace ethertype variable with ETH_P_BATMAN for readability Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-03-20 10:39:56 +00:00
/* drop batman-in-batman packets to prevent loops */
batman-adv: Snoop DHCPACKs for DAT In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 15:52:53 +00:00
if (proto != htons(ETH_P_BATMAN)) {
batman-adv: Fix potentially broken skb network header access The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-30 21:45:26 +00:00
network_offset += VLAN_HLEN;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
break;
batman-adv: Fix potentially broken skb network header access The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-30 21:45:26 +00:00
}
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Use 'fallthrough' pseudo keyword The usage of the '/* fall through */' comments in switches are no longer marked as non-deprecated variant of implicit fall throughs for switch statements. The commit 294f69e662d1 ("compiler_attributes.h: Add 'fallthrough' pseudo keyword for switch/case use") introduced a replacement keyword which should be used instead. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-10-31 16:34:37 +00:00
fallthrough;
batman-adv: use ETH_P_BATMAN The ETH_P_BATMAN ethertype is now defined kernel-wide. Use it instead of the private BATADV_ETH_P_BATMAN define. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-25 23:38:50 +00:00
case ETH_P_BATMAN:
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped;
batman-adv: remove old bridge loop avoidance code The functionality is to be replaced by an improved implementation, so first clean up. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:18 +00:00
}
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Fix potentially broken skb network header access The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-30 21:45:26 +00:00
skb_set_network_header(skb, network_offset);
batman-adv: Prefix bridge_loop_avoidance non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 11:38:47 +00:00
if (batadv_bla_tx(bat_priv, skb, vid))
batman-adv: add basic bridge loop avoidance code This second version of the bridge loop avoidance for batman-adv avoids loops between the mesh and a backbone (usually a LAN). By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. With this patch, batman recognizes backbone gateways, nodes which are part of the mesh and backbone/LAN at the same time. Each backbone gateway "claims" clients from within the mesh to handle them exclusively. By restricting that only responsible backbone gateways may handle their claimed clients traffic, loops are effectively avoided. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:19 +00:00
goto dropped;
batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-06 18:21:15 +00:00
/* skb->data might have been reallocated by batadv_bla_tx() */
batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx path Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-19 21:22:45 +00:00
ethhdr = eth_hdr(skb);
batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-06 18:21:15 +00:00
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 12:27:44 +00:00
/* Register the client MAC in the transtable */
batman-adv: don't add loop detect macs to TT The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2016-11-24 15:11:01 +00:00
if (!is_multicast_ether_addr(ethhdr->h_source) &&
!batadv_bla_is_loopdetect_mac(ethhdr->h_source)) {
batman-adv: limit local translation table max size The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-27 07:33:25 +00:00
client_added = batadv_tt_local_add(soft_iface, ethhdr->h_source,
batman-adv: mark a local client as isolated when needed A client sending packets which mark matches the value configured via sysfs has to be identified as isolated using the TT_CLIENT_ISOLA flag. The match is mask based, meaning that only bits set in the mask are compared with those in the mark value. If the configured mask is equal to 0 no operation is performed. Such flag is then advertised within the classic client announcement mechanism. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:48 +00:00
vid, skb->skb_iif,
skb->mark);
batman-adv: limit local translation table max size The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-27 07:33:25 +00:00
if (!client_added)
goto dropped;
}
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Snoop DHCPACKs for DAT In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 15:52:53 +00:00
/* Snoop address candidates from DHCPACKs for early DAT filling */
batadv_dat_snoop_outgoing_dhcp_ack(bat_priv, skb, proto, vid);
batman-adv: drop STP over batman Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:25 +00:00
/* don't accept stp packets. STP does not help in meshes.
* better use the bridge loop avoidance ...
batman-adv: don't allow ECTP traffic on batman-adv We have seen this to break networks when used with bridge loop avoidance. As we can't see any benefit from sending these ancient frames via our mesh, we just drop them. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-19 18:10:09 +00:00
*
* The same goes for ECTP sent at least by some Cisco Switches,
* it might confuse the mesh when used with bridge loop avoidance.
batman-adv: drop STP over batman Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:25 +00:00
*/
batman-adv: Prefix main static inline functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 11:48:58 +00:00
if (batadv_compare_eth(ethhdr->h_dest, stp_addr))
batman-adv: drop STP over batman Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 19:00:25 +00:00
goto dropped;
batman-adv: don't allow ECTP traffic on batman-adv We have seen this to break networks when used with bridge loop avoidance. As we can't see any benefit from sending these ancient frames via our mesh, we just drop them. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-19 18:10:09 +00:00
if (batadv_compare_eth(ethhdr->h_dest, ectp_addr))
goto dropped;
batman-adv: move GW mode and selection class to private data structure To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-05 18:46:38 +00:00
gw_mode = atomic_read(&bat_priv->gw.mode);
batman-adv: refactoring gateway handling code Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-09-08 11:12:53 +00:00
if (is_multicast_ether_addr(ethhdr->h_dest)) {
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
/* if gw mode is off, broadcast every packet */
if (gw_mode == BATADV_GW_MODE_OFF) {
do_bcast = true;
goto send;
batman-adv: refactoring gateway handling code Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-09-08 11:12:53 +00:00
}
batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-06 18:21:15 +00:00
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
dhcp_rcp = batadv_gw_dhcp_recipient_get(skb, &header_len,
chaddr);
/* skb->data may have been modified by
* batadv_gw_dhcp_recipient_get()
batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-06 18:21:15 +00:00
*/
batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx path Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-19 21:22:45 +00:00
ethhdr = eth_hdr(skb);
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
/* if gw_mode is on, broadcast any non-DHCP message.
* All the DHCP packets are going to be sent as unicast
*/
if (dhcp_rcp == BATADV_DHCP_NO) {
do_bcast = true;
goto send;
}
if (dhcp_rcp == BATADV_DHCP_TO_CLIENT)
dst_hint = chaddr;
else if ((gw_mode == BATADV_GW_MODE_SERVER) &&
(dhcp_rcp == BATADV_DHCP_TO_SERVER))
/* gateways should not forward any DHCP message if
* directed to a DHCP server
*/
goto dropped;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
send:
batman-adv: Modified forwarding behaviour for multicast packets With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:52 +00:00
if (do_bcast && !is_broadcast_ether_addr(ethhdr->h_dest)) {
batman-adv: mcast: implement multicast packet generation Implement the preparation of a batman-adv multicast packet and use this under certain conditions. For one thing this implements the capability to push a complete batman-adv multicast packet header, including a tracker TVLV with all originator destinations that have signaled interest in it, onto a given ethernet frame with an IP multicast packet inside. For another checks are implemented to determine if encapsulating a multicast packet in this new batman-adv multicast packet type and using it is feasible. Those checks are: 1) Have all nodes signaled that they are capable of handling the new batman-adv multicast packet type? 2) Do all active hard interfaces of all nodes, including us, have an MTU of at least 1280 bytes? 3) Does a complete multicast packet header with all its destination addresses fit onto the given multicast packet / ethernet frame and does not exceed 1280 bytes? If all checks passed then the new batman-adv multicast packet type will be used for transmission and distribution. Otherwise we fall back to one or more batman-adv unicast packet transmissions, if possible. Or if not possible we will fall back to classic flooding through a batman-adv broadcast packet. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-09-07 01:09:09 +00:00
forw_mode = batadv_mcast_forw_mode(bat_priv, skb, vid,
batman-adv: mcast: don't send link-local multicast to mcast routers The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-01 05:27:13 +00:00
&mcast_is_routable);
batman-adv: mcast: remove now redundant single ucast forwarding The multicast code to send a multicast packet via multiple batman-adv unicast packets is not only capable of sending to multiple but also to a single node. Therefore we can safely remove the old, specialized, now redundant multicast-to-single-unicast code. The only functional change of this simplification is that the edge case of allowing a multicast packet with an unsnoopable destination address (224.0.0.0/24 or ff02::1) where only a single node has signaled interest in it via the batman-adv want-all-unsnoopables multicast flag is now transmitted via a batman-adv broadcast instead of a batman-adv unicast packet. Maintaining this edge case feature does not seem worth the extra lines of code and people should just not expect to be able to snoop and optimize such unsnoopable multicast addresses when bridges are involved. While at it also renaming a few items in the batadv_forw_mode enum to prepare for the new batman-adv multicast packet type. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-12-27 19:34:05 +00:00
switch (forw_mode) {
case BATADV_FORW_BCAST:
break;
case BATADV_FORW_UCASTS:
batman-adv: mcast: implement multicast packet generation Implement the preparation of a batman-adv multicast packet and use this under certain conditions. For one thing this implements the capability to push a complete batman-adv multicast packet header, including a tracker TVLV with all originator destinations that have signaled interest in it, onto a given ethernet frame with an IP multicast packet inside. For another checks are implemented to determine if encapsulating a multicast packet in this new batman-adv multicast packet type and using it is feasible. Those checks are: 1) Have all nodes signaled that they are capable of handling the new batman-adv multicast packet type? 2) Do all active hard interfaces of all nodes, including us, have an MTU of at least 1280 bytes? 3) Does a complete multicast packet header with all its destination addresses fit onto the given multicast packet / ethernet frame and does not exceed 1280 bytes? If all checks passed then the new batman-adv multicast packet type will be used for transmission and distribution. Otherwise we fall back to one or more batman-adv unicast packet transmissions, if possible. Or if not possible we will fall back to classic flooding through a batman-adv broadcast packet. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-09-07 01:09:09 +00:00
case BATADV_FORW_MCAST:
batman-adv: Modified forwarding behaviour for multicast packets With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:52 +00:00
do_bcast = false;
batman-adv: mcast: remove now redundant single ucast forwarding The multicast code to send a multicast packet via multiple batman-adv unicast packets is not only capable of sending to multiple but also to a single node. Therefore we can safely remove the old, specialized, now redundant multicast-to-single-unicast code. The only functional change of this simplification is that the edge case of allowing a multicast packet with an unsnoopable destination address (224.0.0.0/24 or ff02::1) where only a single node has signaled interest in it via the batman-adv want-all-unsnoopables multicast flag is now transmitted via a batman-adv broadcast instead of a batman-adv unicast packet. Maintaining this edge case feature does not seem worth the extra lines of code and people should just not expect to be able to snoop and optimize such unsnoopable multicast addresses when bridges are involved. While at it also renaming a few items in the batadv_forw_mode enum to prepare for the new batman-adv multicast packet type. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-12-27 19:34:05 +00:00
break;
case BATADV_FORW_NONE:
fallthrough;
default:
goto dropped;
}
batman-adv: Modified forwarding behaviour for multicast packets With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:52 +00:00
}
}
batman-adv: set skb priority according to content The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-07-29 15:56:44 +00:00
batadv_skb_set_priority(skb, 0);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* ethernet packet should be broadcasted */
if (do_bcast) {
batman-adv: Prefix hard-interface static inline functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 11:48:54 +00:00
primary_if = batadv_primary_if_get_selected(bat_priv);
batman-adv: Make bat_priv->primary_if an rcu protected pointer The rcu protected macros rcu_dereference() and rcu_assign_pointer() for the bat_priv->primary_if need to be used, as well as spin/rcu locking. Otherwise we might end up using a primary_if pointer pointing to already freed memory. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-20 13:40:58 +00:00
if (!primary_if)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped;
batman-adv: Distributed ARP Table - add snooping functions for ARP messages In case of an ARP message going in or out the soft_iface, it is intercepted and a special action is performed. In particular the DHT helper functions previously implemented are used to store all the ARP entries belonging to the network in order to provide a fast and unicast lookup instead of the classic broadcast flooding mechanism. Each node stores the entries it is responsible for (following the DHT rules) in its soft_iface ARP table. This makes it possible to reuse the kernel data structures and functions for ARP management. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2011-06-26 01:37:18 +00:00
/* in case of ARP request, we do not immediately broadcasti the
* packet, instead we first wait for DAT to try to retrieve the
* correct ARP entry
*/
if (batadv_dat_snoop_outgoing_arp_request(bat_priv, skb))
brd_delay = msecs_to_jiffies(ARP_REQ_DELAY);
batman-adv: Prefix soft-interface non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:38 +00:00
if (batadv_skb_head_push(skb, sizeof(*bcast_packet)) < 0)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped;
batman-adv: Prefix packet structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:30 +00:00
bcast_packet = (struct batadv_bcast_packet *)skb->data;
batman-adv: fix header alignment by unrolling batadv_header The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-02 19:38:31 +00:00
bcast_packet->version = BATADV_COMPAT_VERSION;
batman-adv: bcast: queue per interface, if needed Currently we schedule a broadcast packet like: 3x: [ [(re-)queue] --> for(hard-if): maybe-transmit ] The intention of queueing a broadcast packet multiple times is to increase robustness for wireless interfaces. However on interfaces which we only broadcast on once the queueing induces an unnecessary penalty. This patch restructures the queueing to be performed on a per interface basis: for(hard-if): - transmit - if wireless: [queue] --> transmit --> [requeue] --> transmit Next to the performance benefits on non-wireless interfaces this should also make it easier to apply alternative strategies for transmissions on wireless interfaces in the future (for instance sending via unicast transmissions on wireless interfaces, without queueing in batman-adv, if appropriate). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-05-16 22:33:07 +00:00
bcast_packet->ttl = BATADV_TTL - 1;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* batman packet type: broadcast */
batman-adv: fix header alignment by unrolling batadv_header The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-02 19:38:31 +00:00
bcast_packet->packet_type = BATADV_BCAST;
batman-adv: Don't leak information through uninitialized packet fields The reserved fields in batman-adv packets are not set to a constant value. The content of these memory regions is leaked unintentionally to the network. This regression was introduced in 3b27ffb00fbe9d9189715ea13ce8712e2f0cb0c5 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-28 09:56:52 +00:00
bcast_packet->reserved = 0;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* hw address of first interface is the orig mac because only
batman-adv: Reformat multiline comments to consistent style batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:43 +00:00
* this mac is known throughout the mesh
*/
batman-adv: prefer ether_addr_copy to memcpy On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-21 23:42:11 +00:00
ether_addr_copy(bcast_packet->orig,
primary_if->net_dev->dev_addr);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* set broadcast sequence number */
batman-adv: Don't break statements after assignment operator Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-08 15:13:15 +00:00
seqno = atomic_inc_return(&bat_priv->bcast_seqno);
bcast_packet->seqno = htonl(seqno);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: bcast: queue per interface, if needed Currently we schedule a broadcast packet like: 3x: [ [(re-)queue] --> for(hard-if): maybe-transmit ] The intention of queueing a broadcast packet multiple times is to increase robustness for wireless interfaces. However on interfaces which we only broadcast on once the queueing induces an unnecessary penalty. This patch restructures the queueing to be performed on a per interface basis: for(hard-if): - transmit - if wireless: [queue] --> transmit --> [requeue] --> transmit Next to the performance benefits on non-wireless interfaces this should also make it easier to apply alternative strategies for transmissions on wireless interfaces in the future (for instance sending via unicast transmissions on wireless interfaces, without queueing in batman-adv, if appropriate). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-05-16 22:33:07 +00:00
batadv_send_bcast_packet(bat_priv, skb, brd_delay, true);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
/* unicast packet */
} else {
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
/* DHCP packets going to a server will use the GW feature */
if (dhcp_rcp == BATADV_DHCP_TO_SERVER) {
batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-06 18:21:15 +00:00
ret = batadv_gw_out_of_range(bat_priv, skb);
batman-adv: refactoring gateway handling code Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-09-08 11:12:53 +00:00
if (ret)
goto dropped;
batman-adv: refine API calls for unicast transmissions of SKBs With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send a packet in the unicast forwarding methods and let the callers decide. This is going to be useful for the upcoming multicast related patches in particular. Further, the return values were polished a little to use the more appropriate NET_XMIT_* defines. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-07-03 08:40:00 +00:00
ret = batadv_send_skb_via_gw(bat_priv, skb, vid);
batman-adv: mcast: remove now redundant single ucast forwarding The multicast code to send a multicast packet via multiple batman-adv unicast packets is not only capable of sending to multiple but also to a single node. Therefore we can safely remove the old, specialized, now redundant multicast-to-single-unicast code. The only functional change of this simplification is that the edge case of allowing a multicast packet with an unsnoopable destination address (224.0.0.0/24 or ff02::1) where only a single node has signaled interest in it via the batman-adv want-all-unsnoopables multicast flag is now transmitted via a batman-adv broadcast instead of a batman-adv unicast packet. Maintaining this edge case feature does not seem worth the extra lines of code and people should just not expect to be able to snoop and optimize such unsnoopable multicast addresses when bridges are involved. While at it also renaming a few items in the batadv_forw_mode enum to prepare for the new batman-adv multicast packet type. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-12-27 19:34:05 +00:00
} else if (forw_mode == BATADV_FORW_UCASTS) {
batman-adv: mcast: don't send link-local multicast to mcast routers The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-01 05:27:13 +00:00
ret = batadv_mcast_forw_send(bat_priv, skb, vid,
mcast_is_routable);
batman-adv: mcast: implement multicast packet generation Implement the preparation of a batman-adv multicast packet and use this under certain conditions. For one thing this implements the capability to push a complete batman-adv multicast packet header, including a tracker TVLV with all originator destinations that have signaled interest in it, onto a given ethernet frame with an IP multicast packet inside. For another checks are implemented to determine if encapsulating a multicast packet in this new batman-adv multicast packet type and using it is feasible. Those checks are: 1) Have all nodes signaled that they are capable of handling the new batman-adv multicast packet type? 2) Do all active hard interfaces of all nodes, including us, have an MTU of at least 1280 bytes? 3) Does a complete multicast packet header with all its destination addresses fit onto the given multicast packet / ethernet frame and does not exceed 1280 bytes? If all checks passed then the new batman-adv multicast packet type will be used for transmission and distribution. Otherwise we fall back to one or more batman-adv unicast packet transmissions, if possible. Or if not possible we will fall back to classic flooding through a batman-adv broadcast packet. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-09-07 01:09:09 +00:00
} else if (forw_mode == BATADV_FORW_MCAST) {
ret = batadv_mcast_forw_mcsend(bat_priv, skb);
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
} else {
if (batadv_dat_snoop_outgoing_arp_request(bat_priv,
skb))
goto dropped;
batman-adv: refine API calls for unicast transmissions of SKBs With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send a packet in the unicast forwarding methods and let the callers decide. This is going to be useful for the upcoming multicast related patches in particular. Further, the return values were polished a little to use the more appropriate NET_XMIT_* defines. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-07-03 08:40:00 +00:00
batman-adv: send every DHCP packet as bat-unicast In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-05 18:31:08 +00:00
batadv_dat_snoop_outgoing_arp_reply(bat_priv, skb);
ret = batadv_send_skb_via_tt(bat_priv, skb, dst_hint,
vid);
}
batman-adv: Count all non-success TX packets as dropped A failure during the submission also causes dropped packets. batadv_interface_tx should therefore also increase the DROPPED counter for these returns. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-17 19:04:01 +00:00
if (ret != NET_XMIT_SUCCESS)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped_freed;
}
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
batadv_inc_counter(bat_priv, BATADV_CNT_TX);
batadv_add_counter(bat_priv, BATADV_CNT_TX_BYTES, data_len);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto end;
dropped:
kfree_skb(skb);
dropped_freed:
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
batadv_inc_counter(bat_priv, BATADV_CNT_TX_DROPPED);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
end:
batman-adv: Drop NULL check before dropping references The check if a batman-adv related object is NULL or not is now directly in the batadv_*_put functions. It is not needed anymore to perform this check outside these function: The changes were generated using a coccinelle semantic patch: @@ expression E; @@ - if (likely(E != NULL)) ( batadv_backbone_gw_put | batadv_claim_put | batadv_dat_entry_put | batadv_gw_node_put | batadv_hardif_neigh_put | batadv_hardif_put | batadv_nc_node_put | batadv_nc_path_put | batadv_neigh_ifinfo_put | batadv_neigh_node_put | batadv_orig_ifinfo_put | batadv_orig_node_put | batadv_orig_node_vlan_put | batadv_softif_vlan_put | batadv_tp_vars_put | batadv_tt_global_entry_put | batadv_tt_local_entry_put | batadv_tt_orig_list_entry_put | batadv_tt_req_node_put | batadv_tvlv_container_put | batadv_tvlv_handler_put )(E); Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08 17:11:08 +00:00
batadv_hardif_put(primary_if);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
return NETDEV_TX_OK;
}
batman-adv: Add kernel-doc for batadv_interface_rx Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-28 10:38:50 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_interface_rx() - receive ethernet frame on local batman-adv interface
batman-adv: Add kernel-doc for batadv_interface_rx Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-28 10:38:50 +00:00
* @soft_iface: local interface which will receive the ethernet frame
* @skb: ethernet frame for @soft_iface
* @hdr_size: size of already parsed batman-adv header
* @orig_node: originator from which the batman-adv packet was sent
*
batman-adv: Fix typos and grammar in documentation Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-01 18:13:21 +00:00
* Sends an ethernet frame to the receive path of the local @soft_iface.
batman-adv: Add kernel-doc for batadv_interface_rx Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-28 10:38:50 +00:00
* skb->data has still point to the batman-adv header with the size @hdr_size.
* The caller has to have parsed this header already and made sure that at least
* @hdr_size bytes are still available for pull in @skb.
*
* The packet may still get dropped. This can happen when the encapsulated
* ethernet frame is invalid or contains again an batman-adv packet. Also
* unicast packets will be dropped directly when it was sent between two
* isolated clients.
*/
batman-adv: Prefix soft-interface non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 00:09:38 +00:00
void batadv_interface_rx(struct net_device *soft_iface,
batman-adv: Remove unused parameter recv_if of batadv_interface_rx Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-28 10:38:51 +00:00
struct sk_buff *skb, int hdr_size,
struct batadv_orig_node *orig_node)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: fix header alignment by unrolling batadv_header The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-02 19:38:31 +00:00
struct batadv_bcast_packet *batadv_bcast_packet;
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct vlan_ethhdr *vhdr;
struct ethhdr *ethhdr;
unsigned short vid;
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15 07:54:09 +00:00
int packet_type;
batman-adv: check incoming packet type for bla If the gateway functionality is used, some broadcast packets (DHCP requests) may be transmitted as unicast packets. As the bridge loop avoidance code now only considers the payload Ethernet destination, it may drop the DHCP request for clients which are claimed by other backbone gateways, because it falsely infers from the broadcast address that the right backbone gateway should havehandled the broadcast. Fix this by checking and delegating the batman-adv packet type used for transmission. Reported-by: Guido Iribarren <guidoiribarren@buenosaireslibre.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2012-07-04 18:38:19 +00:00
batman-adv: fix header alignment by unrolling batadv_header The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-02 19:38:31 +00:00
batadv_bcast_packet = (struct batadv_bcast_packet *)skb->data;
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15 07:54:09 +00:00
packet_type = batadv_bcast_packet->packet_type;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
skb_pull_rcsum(skb, hdr_size);
skb_reset_mac_header(skb);
batman-adv: clean nf state when removing protocol header If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-23 00:28:05 +00:00
/* clean the netfilter state now that the batman-adv header has been
* removed
*/
netfilter: drop bridge nf reset from nf_reset commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-29 18:54:03 +00:00
nf_reset_ct(skb);
batman-adv: clean nf state when removing protocol header If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-23 00:28:05 +00:00
batman-adv: Check skb size before using encapsulated ETH+VLAN header The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-26 16:56:13 +00:00
if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
goto dropped;
batman-adv: fix vlan header access When batadv_get_vid() is invoked in interface_rx() the batman-adv header has already been removed, therefore the header_len argument has to be 0. Introduced by c018ad3de61a1dc4194879a53e5559e094aa7b1a ("batman-adv: add the VLAN ID attribute to the TT entry") Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-23 20:43:39 +00:00
vid = batadv_get_vid(skb, 0);
batman-adv: use eth_hdr() when it makes sense Instead of casting the result of skb_mac_header() to "struct ethhdr *" every time, the eth_hdr inline function can be use to beautify the code and improve its readability. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-08 13:08:18 +00:00
ethhdr = eth_hdr(skb);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
batman-adv: Check skb size before using encapsulated ETH+VLAN header The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-26 16:56:13 +00:00
if (!pskb_may_pull(skb, VLAN_ETH_HLEN))
goto dropped;
net: vlan: introduce skb_vlan_eth_hdr() Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-20 22:55:54 +00:00
vhdr = skb_vlan_eth_hdr(skb);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: replace ethertype variable with ETH_P_BATMAN for readability Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-03-20 10:39:56 +00:00
/* drop batman-in-batman packets to prevent loops */
if (vhdr->h_vlan_encapsulated_proto != htons(ETH_P_BATMAN))
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
break;
batman-adv: Use 'fallthrough' pseudo keyword The usage of the '/* fall through */' comments in switches are no longer marked as non-deprecated variant of implicit fall throughs for switch statements. The commit 294f69e662d1 ("compiler_attributes.h: Add 'fallthrough' pseudo keyword for switch/case use") introduced a replacement keyword which should be used instead. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-10-31 16:34:37 +00:00
fallthrough;
batman-adv: use ETH_P_BATMAN The ETH_P_BATMAN ethertype is now defined kernel-wide. Use it instead of the private BATADV_ETH_P_BATMAN define. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-25 23:38:50 +00:00
case ETH_P_BATMAN:
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
goto dropped;
}
/* skb->dev & skb->pkt_type are set here */
skb->protocol = eth_type_trans(skb, soft_iface);
batman-adv: fix packet checksum in receive path eth_type_trans() internally calls skb_pull(), which does not adjust the skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are received. Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-01-23 09:59:49 +00:00
skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
batadv_inc_counter(bat_priv, BATADV_CNT_RX);
batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES,
skb->len + ETH_HLEN);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: process broadcast packets in BLA earlier The logic in the BLA mechanism may decide to drop broadcast packets because the node may still be in the setup phase. For this reason, further broadcast processing like the early client detection mechanism must be done only after the BLA check. This patches moves the invocation to BLA before any other broadcast processing. This was introduced 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-08 20:55:30 +00:00
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15 07:54:09 +00:00
if (batadv_bla_rx(bat_priv, skb, vid, packet_type))
batman-adv: process broadcast packets in BLA earlier The logic in the BLA mechanism may decide to drop broadcast packets because the node may still be in the setup phase. For this reason, further broadcast processing like the early client detection mechanism must be done only after the BLA check. This patches moves the invocation to BLA before any other broadcast processing. This was introduced 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-08 20:55:30 +00:00
goto out;
batman-adv: change interface_rx to get orig node In order to understand where a broadcast packet is coming from and use this information to detect not yet announced clients, this patch modifies the interface_rx() function by passing a new argument: the orig node corresponding to the node that originated the received packet (if known). This new argument if not NULL for broadcast packets only (other packets does not have source field). Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-05 21:38:30 +00:00
if (orig_node)
batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
batman-adv: add the VLAN ID attribute to the TT entry To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-06-04 10:11:39 +00:00
ethhdr->h_source, vid);
batman-adv: change interface_rx to get orig node In order to understand where a broadcast packet is coming from and use this information to detect not yet announced clients, this patch modifies the interface_rx() function by passing a new argument: the orig node corresponding to the node that originated the received packet (if known). This new argument if not NULL for broadcast packets only (other packets does not have source field). Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-05 21:38:30 +00:00
batman-adv: set the isolation mark in the skb if needed If a broadcast packet is coming from a client marked as isolated, then mark the skb using the isolation mark so that netfilter (or any other application) can recognise them. The mark is written in the skb based on the mask value: only bits set in the mask are substitued by those in the mark value Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:52 +00:00
if (is_multicast_ether_addr(ethhdr->h_dest)) {
/* set the mark on broadcast packets if AP isolation is ON and
* the packet is coming from an "isolated" client
*/
if (batadv_vlan_ap_isola_get(bat_priv, vid) &&
batadv_tt_global_is_isolated(bat_priv, ethhdr->h_source,
vid)) {
/* save bits in skb->mark not covered by the mask and
* apply the mark on the rest
*/
skb->mark &= ~bat_priv->isolation_mark_mask;
skb->mark |= bat_priv->isolation_mark;
}
} else if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source,
ethhdr->h_dest, vid)) {
batman-adv: implement AP-isolation on the receiver side When a node receives a unicast packet it checks if the source and the destination client can communicate or not due to the AP isolation Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07 13:35:36 +00:00
goto dropped;
batman-adv: set the isolation mark in the skb if needed If a broadcast packet is coming from a client marked as isolated, then mark the skb using the isolation mark so that netfilter (or any other application) can recognise them. The mark is written in the skb based on the mask value: only bits set in the mask are substitued by those in the mark value Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:52 +00:00
}
batman-adv: implement AP-isolation on the receiver side When a node receives a unicast packet it checks if the source and the destination client can communicate or not due to the AP isolation Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07 13:35:36 +00:00
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
netif_rx(skb);
batman-adv: protect softif_neigh by rcu Add get/set wrapper functions for softif_neigh and use rcu functions to manipulate the pointers. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-17 18:34:27 +00:00
goto out;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
dropped:
kfree_skb(skb);
out:
return;
}
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_vlan_release() - release vlan from lists and queue for free
* after rcu grace period
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
* @ref: kref pointer of the vlan object
*/
batman-adv: Check ptr for NULL before reducing its refcnt The commit b37a46683739 ("netdevice: add the case if dev is NULL") changed the way how the NULL check for net_devices have to be handled when trying to reduce its reference counter. Before this commit, it was the responsibility of the caller to check whether the object is NULL or not. But it was changed to behave more like kfree. Now the callee has to handle the NULL-case. The batman-adv code was scanned via cocinelle for similar places. These were changed to use the paradigm @@ identifier E, T, R, C; identifier put; @@ void put(struct T *E) { + if (!E) + return; kref_put(&E->C, R); } Functions which were used in other sources files were moved to the header to allow the compiler to inline the NULL check and the kref_put call. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08 17:56:17 +00:00
void batadv_softif_vlan_release(struct kref *ref)
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
{
struct batadv_softif_vlan *vlan;
vlan = container_of(ref, struct batadv_softif_vlan, refcount);
spin_lock_bh(&vlan->bat_priv->softif_vlan_list_lock);
hlist_del_rcu(&vlan->list);
spin_unlock_bh(&vlan->bat_priv->softif_vlan_list_lock);
kfree_rcu(vlan, rcu);
}
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_vlan_get() - get the vlan object for a specific vid
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @bat_priv: the bat priv with all the soft interface information
* @vid: the identifier of the vlan object to retrieve
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: the private data of the vlan matching the vid passed as argument or
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* NULL otherwise. The refcounter of the returned object is incremented by 1.
*/
batman-adv: add sysfs framework for VLAN Each VLAN can now have its own set of attributes which are exported through a new subfolder in the sysfs tree. Each VLAN created on top of a soft_iface will have its own subfolder. The subfolder is named "vlan%VID" and it is created inside the "mesh" sysfs folder belonging to batman-adv. Attributes corresponding to the untagged LAN are stored in the root sysfs folder as before. This patch also creates all the needed macros and data structures to easily handle new VLAN spacific attributes. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:35 +00:00
struct batadv_softif_vlan *batadv_softif_vlan_get(struct batadv_priv *bat_priv,
unsigned short vid)
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
{
struct batadv_softif_vlan *vlan_tmp, *vlan = NULL;
rcu_read_lock();
hlist_for_each_entry_rcu(vlan_tmp, &bat_priv->softif_vlan_list, list) {
if (vlan_tmp->vid != vid)
continue;
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
if (!kref_get_unless_zero(&vlan_tmp->refcount))
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
continue;
vlan = vlan_tmp;
break;
}
rcu_read_unlock();
return vlan;
}
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_create_vlan() - allocate the needed resources for a new vlan
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: 0 on success, a negative error otherwise.
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
*/
int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
{
struct batadv_softif_vlan *vlan;
batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-12 19:04:43 +00:00
spin_lock_bh(&bat_priv->softif_vlan_list_lock);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
vlan = batadv_softif_vlan_get(bat_priv, vid);
if (vlan) {
batman-adv: Rename batadv_softif_vlan *_free_ref function to *_put The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-17 10:01:21 +00:00
batadv_softif_vlan_put(vlan);
batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-12 19:04:43 +00:00
spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
return -EEXIST;
}
vlan = kzalloc(sizeof(*vlan), GFP_ATOMIC);
batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-12 19:04:43 +00:00
if (!vlan) {
spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
return -ENOMEM;
batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-12 19:04:43 +00:00
}
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
batman-adv: fix TT VLAN inconsistency on VLAN re-add When a VLAN interface (on top of batX) is removed and re-added within a short timeframe TT does not have enough time to properly cleanup. This creates an internal TT state mismatch as the newly created softif_vlan will be initialized from scratch with a TT client count of zero (even if TT entries for this VLAN still exist). The resulting TT messages are bogus due to the counter / tt client listing mismatch, thus creating inconsistencies on every node in the network To fix this issue destroy_vlan() has to not free the VLAN object immediately but it has to be kept alive until all the TT entries for this VLAN have been removed. destroy_vlan() still removes the sysfs folder so that the user has the feeling that everything went fine. If the same VLAN is re-added before the old object is free'd, then the latter is resurrected and re-used. Implement such behaviour by increasing the reference counter of a softif_vlan object every time a new local TT entry for such VLAN is created and remove the object from the list only when all the TT entries have been destroyed. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-05-08 15:13:15 +00:00
vlan->bat_priv = bat_priv;
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
vlan->vid = vid;
batman-adv: Convert batadv_softif_vlan to kref batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 09:29:42 +00:00
kref_init(&vlan->refcount);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
batman-adv: make the AP isolation attribute VLAN specific AP isolation has to be enabled on one VLAN interface only. This patch moves the AP isolation attribute to the per-vlan interface attribute set, enabling it to have a different value depending on the selected vlan. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:36 +00:00
atomic_set(&vlan->ap_isolation, 0);
batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-08-12 19:04:43 +00:00
kref_get(&vlan->refcount);
hlist_add_head_rcu(&vlan->list, &bat_priv->softif_vlan_list);
spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
/* add a new TT local entry. This one will be marked with the NOPURGE
* flag
*/
batadv_tt_local_add(bat_priv->soft_iface,
bat_priv->soft_iface->dev_addr, vid,
batman-adv: mark a local client as isolated when needed A client sending packets which mark matches the value configured via sysfs has to be identified as isolated using the TT_CLIENT_ISOLA flag. The match is mask based, meaning that only bits set in the mask are compared with those in the mark value. If the configured mask is equal to 0 no operation is performed. Such flag is then advertised within the classic client announcement mechanism. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:48 +00:00
BATADV_NULL_IFINDEX, BATADV_NO_MARK);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
batman-adv: Place kref_get for softif_vlan near use It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-15 15:39:29 +00:00
/* don't return reference to new softif_vlan */
batadv_softif_vlan_put(vlan);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
return 0;
}
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_destroy_vlan() - remove and destroy a softif_vlan object
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @bat_priv: the bat priv with all the soft interface information
* @vlan: the object to remove
*/
static void batadv_softif_destroy_vlan(struct batadv_priv *bat_priv,
struct batadv_softif_vlan *vlan)
{
/* explicitly remove the associated TT local entry because it is marked
* with the NOPURGE flag
*/
batadv_tt_local_remove(bat_priv, bat_priv->soft_iface->dev_addr,
vlan->vid, "vlan interface destroyed", false);
batman-adv: Rename batadv_softif_vlan *_free_ref function to *_put The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-17 10:01:21 +00:00
batadv_softif_vlan_put(vlan);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
}
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_interface_add_vid() - ndo_add_vid API implementation
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @dev: the netdev of the mesh interface
batman-adv: Drop repeated words in comments checkpatch found various instances of "Possible repeated word" in various comments. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-07-31 18:33:00 +00:00
* @proto: protocol of the vlan id
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @vid: identifier of the new vlan
*
* Set up all the internal structures for handling the new vlan on top of the
* mesh interface
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: 0 on success or a negative error code in case of failure.
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
*/
static int batadv_interface_add_vid(struct net_device *dev, __be16 proto,
unsigned short vid)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
batman-adv: fix TT VLAN inconsistency on VLAN re-add When a VLAN interface (on top of batX) is removed and re-added within a short timeframe TT does not have enough time to properly cleanup. This creates an internal TT state mismatch as the newly created softif_vlan will be initialized from scratch with a TT client count of zero (even if TT entries for this VLAN still exist). The resulting TT messages are bogus due to the counter / tt client listing mismatch, thus creating inconsistencies on every node in the network To fix this issue destroy_vlan() has to not free the VLAN object immediately but it has to be kept alive until all the TT entries for this VLAN have been removed. destroy_vlan() still removes the sysfs folder so that the user has the feeling that everything went fine. If the same VLAN is re-added before the old object is free'd, then the latter is resurrected and re-used. Implement such behaviour by increasing the reference counter of a softif_vlan object every time a new local TT entry for such VLAN is created and remove the object from the list only when all the TT entries have been destroyed. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-05-08 15:13:15 +00:00
struct batadv_softif_vlan *vlan;
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
/* only 802.1Q vlans are supported.
* batman-adv does not know how to handle other types
*/
if (proto != htons(ETH_P_8021Q))
return -EINVAL;
vid |= BATADV_VLAN_HAS_TAG;
batman-adv: fix TT VLAN inconsistency on VLAN re-add When a VLAN interface (on top of batX) is removed and re-added within a short timeframe TT does not have enough time to properly cleanup. This creates an internal TT state mismatch as the newly created softif_vlan will be initialized from scratch with a TT client count of zero (even if TT entries for this VLAN still exist). The resulting TT messages are bogus due to the counter / tt client listing mismatch, thus creating inconsistencies on every node in the network To fix this issue destroy_vlan() has to not free the VLAN object immediately but it has to be kept alive until all the TT entries for this VLAN have been removed. destroy_vlan() still removes the sysfs folder so that the user has the feeling that everything went fine. If the same VLAN is re-added before the old object is free'd, then the latter is resurrected and re-used. Implement such behaviour by increasing the reference counter of a softif_vlan object every time a new local TT entry for such VLAN is created and remove the object from the list only when all the TT entries have been destroyed. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-05-08 15:13:15 +00:00
/* if a new vlan is getting created and it already exists, it means that
* it was not deleted yet. batadv_softif_vlan_get() increases the
* refcount in order to revive the object.
*
* if it does not exist then create it.
*/
vlan = batadv_softif_vlan_get(bat_priv, vid);
if (!vlan)
return batadv_softif_create_vlan(bat_priv, vid);
/* add a new TT local entry. This one will be marked with the NOPURGE
* flag. This must be added again, even if the vlan object already
* exists, because the entry was deleted by kill_vid()
*/
batadv_tt_local_add(bat_priv->soft_iface,
bat_priv->soft_iface->dev_addr, vid,
BATADV_NULL_IFINDEX, BATADV_NO_MARK);
return 0;
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
}
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_interface_kill_vid() - ndo_kill_vid API implementation
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @dev: the netdev of the mesh interface
batman-adv: Drop repeated words in comments checkpatch found various instances of "Possible repeated word" in various comments. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-07-31 18:33:00 +00:00
* @proto: protocol of the vlan id
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* @vid: identifier of the deleted vlan
*
* Destroy all the internal structures used to handle the vlan identified by vid
* on top of the mesh interface
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: 0 on success, -EINVAL if the specified prototype is not ETH_P_8021Q
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
* or -ENOENT if the specified vlan id wasn't registered.
*/
static int batadv_interface_kill_vid(struct net_device *dev, __be16 proto,
unsigned short vid)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
struct batadv_softif_vlan *vlan;
/* only 802.1Q vlans are supported. batman-adv does not know how to
* handle other types
*/
if (proto != htons(ETH_P_8021Q))
return -EINVAL;
vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
if (!vlan)
return -ENOENT;
batadv_softif_destroy_vlan(bat_priv, vlan);
/* finally free the vlan object */
batman-adv: Rename batadv_softif_vlan *_free_ref function to *_put The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-17 10:01:21 +00:00
batadv_softif_vlan_put(vlan);
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
return 0;
}
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 05:22:19 +00:00
/* batman-adv network devices have devices nesting below it and are a special
* "super class" of normal network devices; split their locks off into a
* separate class since they always nest.
*/
static struct lock_class_key batadv_netdev_xmit_lock_key;
net: change addr_list_lock back to static key The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08 21:53:01 +00:00
static struct lock_class_key batadv_netdev_addr_lock_key;
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 05:22:19 +00:00
/**
* batadv_set_lockdep_class_one() - Set lockdep class for a single tx queue
* @dev: device which owns the tx queue
* @txq: tx queue to modify
* @_unused: always NULL
*/
static void batadv_set_lockdep_class_one(struct net_device *dev,
struct netdev_queue *txq,
void *_unused)
{
lockdep_set_class(&txq->_xmit_lock, &batadv_netdev_xmit_lock_key);
}
/**
* batadv_set_lockdep_class() - Set txq and addr_list lockdep class
* @dev: network device to modify
*/
static void batadv_set_lockdep_class(struct net_device *dev)
{
net: change addr_list_lock back to static key The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08 21:53:01 +00:00
lockdep_set_class(&dev->addr_list_lock, &batadv_netdev_addr_lock_key);
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 05:22:19 +00:00
netdev_for_each_tx_queue(dev, batadv_set_lockdep_class_one, NULL);
}
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_init_late() - late stage initialization of soft interface
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
* @dev: registered network device to modify
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: error code on failures
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
*/
static int batadv_softif_init_late(struct net_device *dev)
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
{
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 20:31:31 +00:00
struct batadv_priv *bat_priv;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
u32 random_seqno;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
int ret;
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
size_t cnt_len = sizeof(u64) * BATADV_CNT_NUM;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 05:22:19 +00:00
batadv_set_lockdep_class(dev);
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
bat_priv = netdev_priv(dev);
bat_priv->soft_iface = dev;
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
/* batadv_interface_stats() needs to be available as soon as
* register_netdevice() has been called
*/
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 16:34:26 +00:00
bat_priv->bat_counters = __alloc_percpu(cnt_len, __alignof__(u64));
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
if (!bat_priv->bat_counters)
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
return -ENOMEM;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
atomic_set(&bat_priv->aggregated_ogms, 1);
atomic_set(&bat_priv->bonding, 0);
batman-adv: don't compile the BLA switch if not requested When the Bridge Loop Avoidance component is not compiled-in, its boolean switch should be not compiled as well. This patch surrounds the switch with a proper ifdef. This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833 ("batman-adv: add bridge loop avoidance compile option") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-26 00:27:29 +00:00
#ifdef CONFIG_BATMAN_ADV_BLA
batman-adv: Use safer default config for optional features The current default settings for optional features in batman-adv seems to be based around the idea that the user only compiles what he requires. They will automatically enabled when they are compiled in. For example the network coding part of batman-adv is by default disabled in the out-of-tree module but will be enabled when the code is compiled during the module build. But distributions like Debian just enable all features of the batman-adv kernel module and hope that more experimental features or features with possible negative effects have to be enabled using some runtime configuration interface. The network_coding feature can help in specific setups but also has drawbacks and is not disabled by default in the out-of-tree module. Disabling by default in the runtime config seems to be also quite sane. The bridge_loop_avoidance is the only feature which is disabled by default but may be necessary even in simple setups. Packet loops may even be created during the initial node setup when this is not enabled. This is different than STP on bridges because mesh is usually used on Adhoc WiFi. Having two nodes (by accident) in the same LAN segment and in the same mesh network is rather common in this situation. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-02-18 17:20:24 +00:00
atomic_set(&bat_priv->bridge_loop_avoidance, 1);
batman-adv: don't compile the BLA switch if not requested When the Bridge Loop Avoidance component is not compiled-in, its boolean switch should be not compiled as well. This patch surrounds the switch with a proper ifdef. This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833 ("batman-adv: add bridge loop avoidance compile option") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-26 00:27:29 +00:00
#endif
batman-adv: Distributed ARP Table - add runtime switch This patch adds a runtime switch that enables the user to turn the DAT feature on or off at runtime Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-08 16:50:57 +00:00
#ifdef CONFIG_BATMAN_ADV_DAT
atomic_set(&bat_priv->distributed_arp_table, 1);
batman-adv: Announce new capability via multicast TVLV If the soft interface of a node is not part of a bridge then a node announces a new multicast TVLV: The existence of this TVLV signalizes that this node is announcing all of its multicast listeners via the translation table infrastructure. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:51 +00:00
#endif
#ifdef CONFIG_BATMAN_ADV_MCAST
batman-adv: Modified forwarding behaviour for multicast packets With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:52 +00:00
atomic_set(&bat_priv->multicast_mode, 1);
batman-adv: Add multicast-to-unicast support for multiple targets With this patch multicast packets with a limited number of destinations (current default: 16) will be split and transmitted by the originator as individual unicast transmissions. Wifi broadcasts with their low bitrate are still a costly undertaking. In a mesh network this cost multiplies with the overall size of the mesh network. Therefore using multiple unicast transmissions instead of broadcast flooding is almost always less burdensome for the mesh network. The maximum amount of unicast packets can be configured via the newly introduced multicast_fanout parameter. If this limit is exceeded distribution will fall back to classic broadcast flooding. The multicast-to-unicast conversion is performed on the initial multicast sender node and counts on a final destination node, mesh-wide basis (and not next hop, neighbor node basis). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-23 04:47:41 +00:00
atomic_set(&bat_priv->multicast_fanout, 16);
batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support With this patch a node may additionally perform the dropping or unicasting behaviour for a link-local IPv4 and link-local-all-nodes IPv6 multicast packet, too. The extra counter and BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag is needed because with a future bridge snooping support integration a node with a bridge on top of its soft interface is not able to reliably detect its multicast listeners for IPv4 link-local and the IPv6 link-local-all-nodes addresses anymore (see RFC4541, section 2.1.2.2 and section 3). Even though this new flag does make "no difference" now, it'll ensure a seamless integration of multicast bridge support without needing to break compatibility later. Also note, that even with multicast bridge support it won't be possible to optimize 224.0.0.x and ff02::1 towards nodes with bridges, they will always receive these ranges. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:53 +00:00
atomic_set(&bat_priv->mcast.num_want_all_unsnoopables, 0);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:54 +00:00
atomic_set(&bat_priv->mcast.num_want_all_ipv4, 0);
atomic_set(&bat_priv->mcast.num_want_all_ipv6, 0);
batman-adv: mcast: implement multicast packet generation Implement the preparation of a batman-adv multicast packet and use this under certain conditions. For one thing this implements the capability to push a complete batman-adv multicast packet header, including a tracker TVLV with all originator destinations that have signaled interest in it, onto a given ethernet frame with an IP multicast packet inside. For another checks are implemented to determine if encapsulating a multicast packet in this new batman-adv multicast packet type and using it is feasible. Those checks are: 1) Have all nodes signaled that they are capable of handling the new batman-adv multicast packet type? 2) Do all active hard interfaces of all nodes, including us, have an MTU of at least 1280 bytes? 3) Does a complete multicast packet header with all its destination addresses fit onto the given multicast packet / ethernet frame and does not exceed 1280 bytes? If all checks passed then the new batman-adv multicast packet type will be used for transmission and distribution. Otherwise we fall back to one or more batman-adv unicast packet transmissions, if possible. Or if not possible we will fall back to classic flooding through a batman-adv broadcast packet. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-09-07 01:09:09 +00:00
atomic_set(&bat_priv->mcast.num_no_mc_ptype_capa, 0);
batman-adv: Distributed ARP Table - add runtime switch This patch adds a runtime switch that enables the user to turn the DAT feature on or off at runtime Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-08 16:50:57 +00:00
#endif
batman-adv: move GW mode and selection class to private data structure To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-05 18:46:38 +00:00
atomic_set(&bat_priv->gw.mode, BATADV_GW_MODE_OFF);
batman-adv: tvlv - gateway download/upload bandwidth container Prior to this patch batman-adv read the advertised uplink bandwidth from userspace and compressed this information into a single byte called "gateway class". Now the download & upload bandwidth information is sent as-is. No userspace change is necessary since the sysfs API always allowed to specify a bandwidth. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-04-23 13:39:58 +00:00
atomic_set(&bat_priv->gw.bandwidth_down, 100);
atomic_set(&bat_priv->gw.bandwidth_up, 20);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
atomic_set(&bat_priv->orig_interval, 1000);
batman-adv: increase default hop penalty The default hop penalty is currently set to 15, which is applied like that for multi interface devices (e.g. dual band APs). Single band devices will still use an effective penalty of 30 (hop penalty + wifi penalty). After receiving reports of too long paths in mesh networks with dual band APs which were fixed by increasing the hop penalty, we'd like to suggest to increase that default value in the default setting as well. We've evaluated that increase in a handful of medium sized mesh networks (5-20 nodes) with single and dual band devices, with changes for the better (shorter routes, higher throughput) or no change at all. This patch changes the hop penalty to 30, which will give an effective penalty of 60 on single band devices (hop penalty + wifi penalty). Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-06-17 10:16:03 +00:00
atomic_set(&bat_priv->hop_penalty, 30);
batman-adv: unbloat batadv_priv if debug is not enabled Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-12-16 05:53:15 +00:00
#ifdef CONFIG_BATMAN_ADV_DEBUG
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
atomic_set(&bat_priv->log_level, 0);
batman-adv: unbloat batadv_priv if debug is not enabled Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-12-16 05:53:15 +00:00
#endif
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
atomic_set(&bat_priv->fragmentation, 1);
batman-adv: limit local translation table max size The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-27 07:33:25 +00:00
atomic_set(&bat_priv->packet_size_max, ETH_DATA_LEN);
batman-adv: Prefix main defines with BATADV_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-03 20:19:17 +00:00
atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN);
atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Prefix main enum with BATADV_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-03 20:19:22 +00:00
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
atomic_set(&bat_priv->bcast_seqno, 1);
batman-adv: Split batadv_priv in sub-structures for features The structure batadv_priv grows everytime a new feature is introduced. It gets hard to find the parts of the struct that belongs to a specific feature. This becomes even harder by the fact that not every feature uses a prefix in the member name. The variables for bridge loop avoidence, gateway handling, translation table and visualization server are moved into separate structs that are included in the bat_priv main struct. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-15 20:26:51 +00:00
atomic_set(&bat_priv->tt.vn, 0);
atomic_set(&bat_priv->tt.local_changes, 0);
atomic_set(&bat_priv->tt.ogm_append_cnt, 0);
#ifdef CONFIG_BATMAN_ADV_BLA
atomic_set(&bat_priv->bla.num_requests, 0);
#endif
batman-adv: throughput meter implementation The throughput meter module is a simple, kernel-space replacement for throughtput measurements tool like iperf and netperf. It is intended to approximate TCP behaviour. It is invoked through batctl: the protocol is connection oriented, with cumulative acknowledgment and a dynamic-size sliding window. The test *can* be interrupted by batctl. A receiver side timeout avoids unlimited waitings for sender packets: after one second of inactivity, the receiver abort the ongoing test. Based on a prototype from Edo Monticelli <montik@autistici.org> Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-05 11:09:43 +00:00
atomic_set(&bat_priv->tp_num, 0);
batman-adv: Split batadv_priv in sub-structures for features The structure batadv_priv grows everytime a new feature is introduced. It gets hard to find the parts of the struct that belongs to a specific feature. This becomes even harder by the fact that not every feature uses a prefix in the member name. The variables for bridge loop avoidence, gateway handling, translation table and visualization server are moved into separate structs that are included in the bat_priv main struct. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-15 20:26:51 +00:00
bat_priv->tt.last_changeset = NULL;
bat_priv->tt.last_changeset_len = 0;
batman-adv: add isolation_mark sysfs attribute This attribute can be used to set and read the value and the mask of the skb mark which will be used to classify the source non-mesh client as ISOLATED. In this way a client can be advertised as such and the mark can potentially be restored at the receiving node before delivering the skb. This can be helpful for creating network wide netfilter policies. This sysfs file expects a string of the shape "$mark/$mask". Where $mark has to be a 32-bit number in any base, while $mask must be a 32bit mask expressed in hex base. Only bits in $mark covered by the bitmask are really stored. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-11-16 11:03:47 +00:00
bat_priv->isolation_mark = 0;
bat_priv->isolation_mark_mask = 0;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Fragment and send skbs larger than mtu Non-broadcast packets larger than MTU are fragmented and sent with an encapsulating header. Up to 16 fragments are supported, which are sent in reverse order on the wire to allow minimal memory copying when creating fragments. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-23 14:53:03 +00:00
/* randomize initial seqno to avoid collision */
get_random_bytes(&random_seqno, sizeof(random_seqno));
atomic_set(&bat_priv->frag_seqno, random_seqno);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
bat_priv->primary_if = NULL;
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 10:12:38 +00:00
batadv_nc_init_bat_priv(bat_priv);
batman-adv: Allow selection of routing algorithm over rtnetlink A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This algorithm has to be selected before the interface is initialized and cannot be changed after that. The only way to select this algorithm was a module parameter which specifies the default algorithm used during the creation of the net_device. This module parameter is writeable over /sys/module/batman_adv/parameters/routing_algo and thus allows switching of the routing algorithm: 1. change routing_algo parameter 2. create new batadv net_device But this is not race free because another process can be scheduled between 1 + 2 and in that time frame change the routing_algo parameter again. It is much cleaner to directly provide this information inside the rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of the creation parameter of their batadv interfaces) be isolated. This also eases the integration of batadv devices inside tools like network-manager or systemd-networkd which are not expecting to operate on /sys before a new net_device is created. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:24 +00:00
if (!bat_priv->algo_ops) {
ret = batadv_algo_select(bat_priv, batadv_routing_algo);
if (ret < 0)
goto free_bat_counters;
}
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
ret = batadv_mesh_init(dev);
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
if (ret < 0)
batman-adv: Drop deprecated debugfs support The debugfs support in batman-adv was marked as deprecated by the commit 00caf6a2b318 ("batman-adv: Mark debugfs functionality as deprecated") and scheduled for removal in 2021. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-17 11:42:29 +00:00
goto free_bat_counters;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
return 0;
net: Add batman-adv meshing protocol B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 11:19:28 +00:00
batman-adv: convert remaining packet counters to per_cpu_ptr() infrastructure Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-23 09:47:53 +00:00
free_bat_counters:
free_percpu(bat_priv->bat_counters);
batman-adv: Avoid double freeing of bat_counters On errors in batadv_mesh_init(), bat_counters will be freed in both batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this by returning earlier from batadv_softif_init_late() in case of errors in batadv_mesh_init() and by setting bat_counters to NULL after freeing. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-04-17 19:13:16 +00:00
bat_priv->bat_counters = NULL;
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
return ret;
}
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_slave_add() - Add a slave interface to a batadv_soft_interface
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should become the slave interface
batman-adv: Add missing kerneldoc for extack The parameter extack was added to batadv_softif_slave_add without adding the kernel-doc for it. This caused kernel-doc warnings. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-10-07 12:21:22 +00:00
* @extack: extended ACK report struct
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: 0 if successful or error otherwise.
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
*/
static int batadv_softif_slave_add(struct net_device *dev,
net: Add extack to ndo_add_slave Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 00:48:46 +00:00
struct net_device *slave_dev,
struct netlink_ext_ack *extack)
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
{
struct batadv_hard_iface *hard_iface;
int ret = -EINVAL;
hard_iface = batadv_hardif_get_by_netdev(slave_dev);
batman-adv: checkpatch - comparison to NULL could be rewritten Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-02-18 14:17:30 +00:00
if (!hard_iface || hard_iface->soft_iface)
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
goto out;
batman-adv: Avoid name based attaching of hard interfaces The sysfs code for the batman-adv/mesh_iface file was receiving a string of the batadv interface. This interface name was then provided to the code which shared sysfs+rtnetlink code for attaching an hard-interface to an batadv interface. The rtnetlink code was also using the (extracted) interface name from the ndo_add_slave callback to increase the shared code - even when it would have been more efficient to use the provided net_device object directly instead of searching it again (based on its name) in batadv_hardif_enable_interface. But this indirect handling is no longer necessary because the sysfs code was dropped. There is now only a single code path which is using batadv_hardif_enable_interface. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-06-01 21:50:35 +00:00
ret = batadv_hardif_enable_interface(hard_iface, dev);
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
out:
batman-adv: Drop NULL check before dropping references The check if a batman-adv related object is NULL or not is now directly in the batadv_*_put functions. It is not needed anymore to perform this check outside these function: The changes were generated using a coccinelle semantic patch: @@ expression E; @@ - if (likely(E != NULL)) ( batadv_backbone_gw_put | batadv_claim_put | batadv_dat_entry_put | batadv_gw_node_put | batadv_hardif_neigh_put | batadv_hardif_put | batadv_nc_node_put | batadv_nc_path_put | batadv_neigh_ifinfo_put | batadv_neigh_node_put | batadv_orig_ifinfo_put | batadv_orig_node_put | batadv_orig_node_vlan_put | batadv_softif_vlan_put | batadv_tp_vars_put | batadv_tt_global_entry_put | batadv_tt_local_entry_put | batadv_tt_orig_list_entry_put | batadv_tt_req_node_put | batadv_tvlv_container_put | batadv_tvlv_handler_put )(E); Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08 17:11:08 +00:00
batadv_hardif_put(hard_iface);
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
return ret;
}
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_slave_del() - Delete a slave iface from a batadv_soft_interface
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should be removed from the master interface
*
batman-adv: Fix kerneldoc parsing of return description Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-09-15 17:00:48 +00:00
* Return: 0 if successful or error otherwise.
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
*/
static int batadv_softif_slave_del(struct net_device *dev,
struct net_device *slave_dev)
{
struct batadv_hard_iface *hard_iface;
int ret = -EINVAL;
hard_iface = batadv_hardif_get_by_netdev(slave_dev);
if (!hard_iface || hard_iface->soft_iface != dev)
goto out;
batman-adv: Drop legacy code for auto deleting mesh interfaces The only way to automatically drop batadv mesh interfaces when all soft interfaces were removed was dropped with the sysfs support. It is no longer needed to have them handled by kernel anymore. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-17 12:37:13 +00:00
batadv_hardif_disable_interface(hard_iface);
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
ret = 0;
out:
batman-adv: Drop NULL check before dropping references The check if a batman-adv related object is NULL or not is now directly in the batadv_*_put functions. It is not needed anymore to perform this check outside these function: The changes were generated using a coccinelle semantic patch: @@ expression E; @@ - if (likely(E != NULL)) ( batadv_backbone_gw_put | batadv_claim_put | batadv_dat_entry_put | batadv_gw_node_put | batadv_hardif_neigh_put | batadv_hardif_put | batadv_nc_node_put | batadv_nc_path_put | batadv_neigh_ifinfo_put | batadv_neigh_node_put | batadv_orig_ifinfo_put | batadv_orig_node_put | batadv_orig_node_vlan_put | batadv_softif_vlan_put | batadv_tp_vars_put | batadv_tt_global_entry_put | batadv_tt_local_entry_put | batadv_tt_orig_list_entry_put | batadv_tt_req_node_put | batadv_tvlv_container_put | batadv_tvlv_handler_put )(E); Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08 17:11:08 +00:00
batadv_hardif_put(hard_iface);
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
return ret;
}
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
static const struct net_device_ops batadv_netdev_ops = {
.ndo_init = batadv_softif_init_late,
.ndo_open = batadv_interface_open,
.ndo_stop = batadv_interface_release,
.ndo_get_stats = batadv_interface_stats,
batman-adv: add per VLAN interface attribute framework Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-07-02 09:04:34 +00:00
.ndo_vlan_rx_add_vid = batadv_interface_add_vid,
.ndo_vlan_rx_kill_vid = batadv_interface_kill_vid,
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
.ndo_set_mac_address = batadv_interface_set_mac_addr,
.ndo_change_mtu = batadv_interface_change_mtu,
batman-adv: Add dummy soft-interface rx mode handler We do not actually need to set any rx filters for the virtual batman soft interface. However a dummy handler enables a user to set static multicast listeners for instance. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-26 15:56:07 +00:00
.ndo_set_rx_mode = batadv_interface_set_rx_mode,
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
.ndo_start_xmit = batadv_interface_tx,
batman-adv: Allow to modify slaves of soft-interfaces through rntl_link The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:27 +00:00
.ndo_validate_addr = eth_validate_addr,
.ndo_add_slave = batadv_softif_slave_add,
.ndo_del_slave = batadv_softif_slave_del,
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
};
batman-adv: Group ethtool related code together The ethtool code was spread in soft-interface.c. This makes reading the code and working on it unnecessary complicated. Having everything in a common place next to the other code which references it, makes it slightly easier. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-04-01 12:47:06 +00:00
static void batadv_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
batman-adv: Replace usage of strlcpy with strscpy The strscpy was introduced to fix some API problems around strlcpy. And checkpatch started to report recently that strlcpy is deprecated and strscpy is preferred. The functionality introduced in commit 30035e45753b ("string: provide strscpy()") improves following points compared to strlcpy: * it doesn't read from memory beyond (src + size) * provides an easy way to check for destination buffer overflow * robust against asynchronous source buffer changes Since batman-adv doesn't depend on any of the previously mentioned behavior changes, the usage of strlcpy can simply be replaced by strscpy to silence checkpatch. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-07-06 12:56:13 +00:00
strscpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver));
strscpy(info->version, BATADV_SOURCE_VERSION, sizeof(info->version));
strscpy(info->fw_version, "N/A", sizeof(info->fw_version));
strscpy(info->bus_info, "batman", sizeof(info->bus_info));
batman-adv: Group ethtool related code together The ethtool code was spread in soft-interface.c. This makes reading the code and working on it unnecessary complicated. Having everything in a common place next to the other code which references it, makes it slightly easier. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-04-01 12:47:06 +00:00
}
/* Inspired by drivers/net/ethernet/dlink/sundance.c:1702
* Declare each description string in struct.name[] to get fixed sized buffer
* and compile time checking for strings longer than ETH_GSTRING_LEN.
*/
static const struct {
const char name[ETH_GSTRING_LEN];
} batadv_counters_strings[] = {
{ "tx" },
{ "tx_bytes" },
{ "tx_dropped" },
{ "rx" },
{ "rx_bytes" },
{ "forward" },
{ "forward_bytes" },
{ "mgmt_tx" },
{ "mgmt_tx_bytes" },
{ "mgmt_rx" },
{ "mgmt_rx_bytes" },
{ "frag_tx" },
{ "frag_tx_bytes" },
{ "frag_rx" },
{ "frag_rx_bytes" },
{ "frag_fwd" },
{ "frag_fwd_bytes" },
{ "tt_request_tx" },
{ "tt_request_rx" },
{ "tt_response_tx" },
{ "tt_response_rx" },
{ "tt_roam_adv_tx" },
{ "tt_roam_adv_rx" },
batman-adv: mcast: implement multicast packet reception and forwarding Implement functionality to receive and forward a new TVLV capable multicast packet type. The new batman-adv multicast packet type allows to contain several originator destination addresses within a TVLV. Routers on the way will potentially split the batman-adv multicast packet and adjust its tracker TVLV contents. Routing decisions are still based on the selected BATMAN IV or BATMAN V routing algorithm. So this new batman-adv multicast packet type retains the same loop-free properties. Also a new OGM multicast TVLV flag is introduced to signal to other nodes that we are capable of handling a batman-adv multicast packet and multicast tracker TVLV. And that all of our hard interfaces have an MTU of at least 1280 bytes (IPv6 minimum MTU), as a simple solution for now to avoid MTU issues while forwarding. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-09-07 01:09:08 +00:00
#ifdef CONFIG_BATMAN_ADV_MCAST
{ "mcast_tx" },
{ "mcast_tx_bytes" },
{ "mcast_tx_local" },
{ "mcast_tx_local_bytes" },
{ "mcast_rx" },
{ "mcast_rx_bytes" },
{ "mcast_rx_local" },
{ "mcast_rx_local_bytes" },
{ "mcast_fwd" },
{ "mcast_fwd_bytes" },
#endif
batman-adv: Group ethtool related code together The ethtool code was spread in soft-interface.c. This makes reading the code and working on it unnecessary complicated. Having everything in a common place next to the other code which references it, makes it slightly easier. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-04-01 12:47:06 +00:00
#ifdef CONFIG_BATMAN_ADV_DAT
{ "dat_get_tx" },
{ "dat_get_rx" },
{ "dat_put_tx" },
{ "dat_put_rx" },
{ "dat_cached_reply_tx" },
#endif
#ifdef CONFIG_BATMAN_ADV_NC
{ "nc_code" },
{ "nc_code_bytes" },
{ "nc_recode" },
{ "nc_recode_bytes" },
{ "nc_buffer" },
{ "nc_decode" },
{ "nc_decode_bytes" },
{ "nc_decode_failed" },
{ "nc_sniffed" },
#endif
};
static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data)
{
if (stringset == ETH_SS_STATS)
memcpy(data, batadv_counters_strings,
sizeof(batadv_counters_strings));
}
static void batadv_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *data)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
int i;
for (i = 0; i < BATADV_CNT_NUM; i++)
data[i] = batadv_sum_counter(bat_priv, i);
}
static int batadv_get_sset_count(struct net_device *dev, int stringset)
{
if (stringset == ETH_SS_STATS)
return BATADV_CNT_NUM;
return -EOPNOTSUPP;
}
static const struct ethtool_ops batadv_ethtool_ops = {
.get_drvinfo = batadv_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_strings = batadv_get_strings,
.get_ethtool_stats = batadv_get_ethtool_stats,
.get_sset_count = batadv_get_sset_count,
};
batman-adv: Move deinitialization of soft-interface to destructor The deinitialization of the soft-interface created in ndo_init/constructor should be done in the destructor and not directly before calling unregister_netdevice Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:23 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_free() - Deconstructor of batadv_soft_interface
batman-adv: Move deinitialization of soft-interface to destructor The deinitialization of the soft-interface created in ndo_init/constructor should be done in the destructor and not directly before calling unregister_netdevice Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:23 +00:00
* @dev: Device to cleanup and remove
*/
static void batadv_softif_free(struct net_device *dev)
{
batadv_mesh_free(dev);
batman-adv: fix global protection fault during soft_iface destruction batadv_mesh_free() schedules some RCU callbacks which need the bat_priv struct to do their jobs, while free_netdev(), which is called immediately after, is destroying the private data. Put an rcu_barrier() in the middle so that free_netdev() is invoked only after all the callbacks returned. This bug has been introduced by ab8f433dd39be94e8617cff2dfe9f7eca162eb15 ("batman-adv: Move deinitialization of soft-interface to destructor") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 09:04:52 +00:00
/* some scheduled RCU callbacks need the bat_priv struct to accomplish
* their tasks. Wait for them all to be finished before freeing the
* netdev and its private data (bat_priv)
*/
rcu_barrier();
batman-adv: Move deinitialization of soft-interface to destructor The deinitialization of the soft-interface created in ndo_init/constructor should be done in the destructor and not directly before calling unregister_netdevice Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:23 +00:00
}
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_init_early() - early stage initialization of soft interface
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
* @dev: registered network device to modify
*/
static void batadv_softif_init_early(struct net_device *dev)
{
ether_setup(dev);
dev->netdev_ops = &batadv_netdev_ops;
net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 16:52:56 +00:00
dev->needs_free_netdev = true;
dev->priv_destructor = batadv_softif_free;
netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local "Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29 12:33:38 +00:00
dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
net: batman-adv: convert to using IFF_NO_QUEUE Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 08:30:44 +00:00
dev->priv_flags |= IFF_NO_QUEUE;
netdev_features: convert NETIF_F_LLTX to dev->lltx NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29 12:33:37 +00:00
dev->lltx = true;
netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local "Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29 12:33:38 +00:00
dev->netns_local = true;
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
/* can't call min_mtu, because the needed variables
* have not been initialized yet
*/
dev->mtu = ETH_DATA_LEN;
/* generate random address */
eth_hw_addr_random(dev);
net: get rid of SET_ETHTOOL_OPS net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 00:12:32 +00:00
dev->ethtool_ops = &batadv_ethtool_ops;
batman-adv: Move soft-interface initialization to ndo_init The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:22 +00:00
}
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
/**
* batadv_softif_validate() - validate configuration of new batadv link
* @tb: IFLA_INFO_DATA netlink attributes
* @data: enum batadv_ifla_attrs attributes
* @extack: extended ACK report struct
*
* Return: 0 if successful or error otherwise.
*/
static int batadv_softif_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
batman-adv: Allow selection of routing algorithm over rtnetlink A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This algorithm has to be selected before the interface is initialized and cannot be changed after that. The only way to select this algorithm was a module parameter which specifies the default algorithm used during the creation of the net_device. This module parameter is writeable over /sys/module/batman_adv/parameters/routing_algo and thus allows switching of the routing algorithm: 1. change routing_algo parameter 2. create new batadv net_device But this is not race free because another process can be scheduled between 1 + 2 and in that time frame change the routing_algo parameter again. It is much cleaner to directly provide this information inside the rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of the creation parameter of their batadv interfaces) be isolated. This also eases the integration of batadv devices inside tools like network-manager or systemd-networkd which are not expecting to operate on /sys before a new net_device is created. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:24 +00:00
struct batadv_algo_ops *algo_ops;
if (!data)
return 0;
if (data[IFLA_BATADV_ALGO_NAME]) {
algo_ops = batadv_algo_get(nla_data(data[IFLA_BATADV_ALGO_NAME]));
if (!algo_ops)
return -EINVAL;
}
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
return 0;
}
/**
* batadv_softif_newlink() - pre-initialize and register new batadv link
* @src_net: the applicable net namespace
* @dev: network device to register
* @tb: IFLA_INFO_DATA netlink attributes
* @data: enum batadv_ifla_attrs attributes
* @extack: extended ACK report struct
*
* Return: 0 if successful or error otherwise.
*/
static int batadv_softif_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
batman-adv: Allow selection of routing algorithm over rtnetlink A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This algorithm has to be selected before the interface is initialized and cannot be changed after that. The only way to select this algorithm was a module parameter which specifies the default algorithm used during the creation of the net_device. This module parameter is writeable over /sys/module/batman_adv/parameters/routing_algo and thus allows switching of the routing algorithm: 1. change routing_algo parameter 2. create new batadv net_device But this is not race free because another process can be scheduled between 1 + 2 and in that time frame change the routing_algo parameter again. It is much cleaner to directly provide this information inside the rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of the creation parameter of their batadv interfaces) be isolated. This also eases the integration of batadv devices inside tools like network-manager or systemd-networkd which are not expecting to operate on /sys before a new net_device is created. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:24 +00:00
struct batadv_priv *bat_priv = netdev_priv(dev);
const char *algo_name;
int err;
if (data && data[IFLA_BATADV_ALGO_NAME]) {
algo_name = nla_data(data[IFLA_BATADV_ALGO_NAME]);
err = batadv_algo_select(bat_priv, algo_name);
if (err)
return -EINVAL;
}
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
return register_netdevice(dev);
}
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:47 +00:00
* batadv_softif_destroy_netlink() - deletion of batadv_soft_interface via
* netlink
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
* @soft_iface: the to-be-removed batman-adv interface
* @head: list pointer
*/
static void batadv_softif_destroy_netlink(struct net_device *soft_iface,
struct list_head *head)
{
batman-adv: Clean up untagged vlan when destroying via rtnl-link The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26 09:16:13 +00:00
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
struct batadv_hard_iface *hard_iface;
batman-adv: Clean up untagged vlan when destroying via rtnl-link The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26 09:16:13 +00:00
struct batadv_softif_vlan *vlan;
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
list_for_each_entry(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface == soft_iface)
batman-adv: Drop legacy code for auto deleting mesh interfaces The only way to automatically drop batadv mesh interfaces when all soft interfaces were removed was dropped with the sysfs support. It is no longer needed to have them handled by kernel anymore. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-17 12:37:13 +00:00
batadv_hardif_disable_interface(hard_iface);
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
}
batman-adv: Clean up untagged vlan when destroying via rtnl-link The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26 09:16:13 +00:00
/* destroy the "untagged" VLAN */
vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
if (vlan) {
batadv_softif_destroy_vlan(bat_priv, vlan);
batadv_softif_vlan_put(vlan);
}
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
unregister_netdevice_queue(soft_iface, head);
}
batman-adv: Add kernel-doc to externally visible functions According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 18:51:53 +00:00
/**
* batadv_softif_is_valid() - Check whether device is a batadv soft interface
* @net_dev: device which should be checked
*
* Return: true when net_dev is a batman-adv interface, false otherwise
*/
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 20:02:39 +00:00
bool batadv_softif_is_valid(const struct net_device *net_dev)
batman-adv: Disallow regular interface as mesh device When trying to associate a net_device with another net_device which already exists, batman-adv assumes that this interface is a fully initialized batman mesh interface without checking it. The behaviour when accessing data behind netdev_priv of a random net_device is undefined and potentially dangerous. Reported-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-04 21:36:41 +00:00
{
batman-adv: Prefix soft-interface local static functions with batadv_ All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-16 18:23:15 +00:00
if (net_dev->netdev_ops->ndo_start_xmit == batadv_interface_tx)
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 20:02:39 +00:00
return true;
batman-adv: Disallow regular interface as mesh device When trying to associate a net_device with another net_device which already exists, batman-adv assumes that this interface is a fully initialized batman mesh interface without checking it. The behaviour when accessing data behind netdev_priv of a random net_device is undefined and potentially dangerous. Reported-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-04 21:36:41 +00:00
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 20:02:39 +00:00
return false;
batman-adv: Disallow regular interface as mesh device When trying to associate a net_device with another net_device which already exists, batman-adv assumes that this interface is a fully initialized batman mesh interface without checking it. The behaviour when accessing data behind netdev_priv of a random net_device is undefined and potentially dangerous. Reported-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-04 21:36:41 +00:00
}
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
static const struct nla_policy batadv_ifla_policy[IFLA_BATADV_MAX + 1] = {
batman-adv: Allow selection of routing algorithm over rtnetlink A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This algorithm has to be selected before the interface is initialized and cannot be changed after that. The only way to select this algorithm was a module parameter which specifies the default algorithm used during the creation of the net_device. This module parameter is writeable over /sys/module/batman_adv/parameters/routing_algo and thus allows switching of the routing algorithm: 1. change routing_algo parameter 2. create new batadv net_device But this is not race free because another process can be scheduled between 1 + 2 and in that time frame change the routing_algo parameter again. It is much cleaner to directly provide this information inside the rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of the creation parameter of their batadv interfaces) be isolated. This also eases the integration of batadv devices inside tools like network-manager or systemd-networkd which are not expecting to operate on /sys before a new net_device is created. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:24 +00:00
[IFLA_BATADV_ALGO_NAME] = { .type = NLA_NUL_STRING },
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
};
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
struct rtnl_link_ops batadv_link_ops __read_mostly = {
.kind = "batadv",
.priv_size = sizeof(struct batadv_priv),
.setup = batadv_softif_init_early,
batman-adv: Prepare infrastructure for newlink settings The batadv generic netlink family can be used to retrieve the current state and set various configuration settings. But there are also settings which must be set before the actual interface is created. The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to transfer such configurations. The minimal required functionality for this is now available for the batadv rtnl_link_ops. Also a new IFLA class of attributes will be attached to it because rtnetlink only allows 51 different attributes but batadv_nl_attrs already contains 62 attributes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-11 10:25:23 +00:00
.maxtype = IFLA_BATADV_MAX,
.policy = batadv_ifla_policy,
.validate = batadv_softif_validate,
.newlink = batadv_softif_newlink,
batman-adv: Allow to use rntl_link for device creation/deletion The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-11 09:10:26 +00:00
.dellink = batadv_softif_destroy_netlink,
};
Reference in New Issue Copy Permalink