Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-12-29 17:25:38 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
d6ef8b40d0
linux-stable/drivers/thermal/thermal_core.h

306 lines
11 KiB
C
Raw Normal View History

drivers: thermal: Update license to SPDX format Update licences format for core thermal files. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-05-07 17:52:29 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
/*
* thermal_core.h
*
* Copyright (C) 2012 Intel Corp
* Author: Durgadoss R <durgadoss.r@intel.com>
*/
#ifndef __THERMAL_CORE_H__
#define __THERMAL_CORE_H__
thermal: core: Add and use thermal zone guard Add and use a guard for thermal zone locking. This allows quite a few error code paths to be simplified among other things and brings in a noticeable code size reduction for a good measure. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/1930069.tdWV9SEqCh@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-10 22:05:25 +00:00
#include <linux/cleanup.h>
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
#include <linux/device.h>
#include <linux/thermal.h>
thermal: netlink: Fix compilation error when CONFIG_NET=n When the network is not configured, the netlink is disabled on all the system. The thermal framework assumed the netlink is always opt-in. Fix this by adding a Kconfig option for the netlink notification, defaulting to yes and depending on CONFIG_NET. As the change implies multiple stubs and in order to not pollute the internal thermal header, the thermal_nelink.h has been added and included in the thermal_core.h, so this one regain some kind of clarity. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200707090159.1018-1-daniel.lezcano@linaro.org
2020-07-07 09:01:57 +00:00
#include "thermal_netlink.h"
thermal: core: Add user thresholds support The user thresholds mechanism is a way to have the userspace to tell the thermal framework to send a notification when a temperature limit is crossed. There is no id, no hysteresis, just the temperature and the direction of the limit crossing. That means we can be notified when a threshold is crossed the way up only, or the way down only or both ways. That allows to create hysteresis values if it is needed. A threshold can be added, deleted or flushed. The latter means all thresholds belonging to a thermal zone will be deleted. When a threshold is added: - if the same threshold (temperature and direction) exists, an error is returned - if a threshold is specified with the same temperature but a different direction, the specified direction is added - if there is no threshold with the same temperature then it is created When a threshold is deleted: - if the same threshold (temperature and direction) exists, it is deleted - if a threshold is specified with the same temperature but a different direction, the specified direction is removed - if there is no threshold with the same temperature, then an error is returned When the threshold are flushed: - All thresholds related to a thermal zone are deleted When a threshold is crossed: - the userspace does not need to know which threshold(s) have been crossed, it will be notified with the current temperature and the previous temperature - if multiple thresholds have been crossed between two updates only one notification will be send to the userspace, it is pointless to send a notification per thresholds crossed as the userspace can handle that easily when it has the temperature delta information Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org [ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-23 09:59:57 +00:00
#include "thermal_thresholds.h"
thermal/debugfs: Add thermal cooling device debugfs information The thermal framework does not have any debug information except a sysfs stat which is a bit controversial. This one allocates big chunks of memory for every cooling devices with a high number of states and could represent on some systems in production several megabytes of memory for just a portion of it. As the sysfs is limited to a page size, the output is not exploitable with large data array and gets truncated. The patch provides the same information than sysfs except the transitions are dynamically allocated, thus they won't show more events than the ones which actually occurred. There is no longer a size limitation and it opens the field for more debugging information where the debugfs is designed for, not sysfs. The thermal debugfs directory structure tries to stay consistent with the sysfs one but in a very simplified way: thermal/ -- cooling_devices |-- 0 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 1 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 2 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 3 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table `-- 4 |-- clear |-- time_in_state_ms |-- total_trans `-- trans_table The content of the files in the cooling devices directory is the same as the sysfs one except for the trans_table which has the following format: Transition Hits 1->0 246 0->1 246 2->1 632 1->2 632 3->2 98 2->3 98 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: White space fixups, rebase ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-01-09 09:41:11 +00:00
#include "thermal_debugfs.h"
thermal: netlink: Fix compilation error when CONFIG_NET=n When the network is not configured, the netlink is disabled on all the system. The thermal framework assumed the netlink is always opt-in. Fix this by adding a Kconfig option for the netlink notification, defaulting to yes and depending on CONFIG_NET. As the change implies multiple stubs and in order to not pollute the internal thermal header, the thermal_nelink.h has been added and included in the thermal_core.h, so this one regain some kind of clarity. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200707090159.1018-1-daniel.lezcano@linaro.org
2020-07-07 09:01:57 +00:00
thermal: core: Store trip sysfs attributes in thermal_trip_desc Instead of allocating memory for trip point sysfs attributes separately, store them in struct thermal_trip_desc for each trip individually which allows a few extra memory allocations to be avoided. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/46571375.fMDQidcC6G@rjwysocki.net
2024-07-29 16:25:03 +00:00
struct thermal_attr {
struct device_attribute attr;
char name[THERMAL_NAME_LENGTH];
};
struct thermal_trip_attrs {
struct thermal_attr type;
struct thermal_attr temp;
struct thermal_attr hyst;
};
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
struct thermal_trip_desc {
struct thermal_trip trip;
thermal: core: Store trip sysfs attributes in thermal_trip_desc Instead of allocating memory for trip point sysfs attributes separately, store them in struct thermal_trip_desc for each trip individually which allows a few extra memory allocations to be avoided. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/46571375.fMDQidcC6G@rjwysocki.net
2024-07-29 16:25:03 +00:00
struct thermal_trip_attrs trip_attrs;
thermal: core: Rename trip list node in struct thermal_trip_desc Since the list node field in struct thermal_trip_desc is going to be used for purposes other than trip crossing notification, rename it to list_node. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/2201558.irdbgypaU6@rjwysocki.net
2024-10-16 11:23:27 +00:00
struct list_head list_node;
thermal: core: Move lists of thermal instances to trip descriptors In almost all places where a thermal zone's list of thermal instances is walked, there is a check to match a specific trip point and it is walked in vain whenever there are no cooling devices associated with the given trip. To address this, store the lists of thermal instances in trip point descriptors instead of storing them in thermal zones and adjust all code using those lists accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5522726.Sb9uPGUboI@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:39:19 +00:00
struct list_head thermal_instances;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
int threshold;
};
thermal: core: Relocate the struct thermal_governor definition Notice that struct thermal_governor is only used by the thermal core and so move its definition to thermal_core.h. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-04 19:27:07 +00:00
/**
* struct thermal_governor - structure that holds thermal governor information
* @name: name of the governor
* @bind_to_tz: callback called when binding to a thermal zone. If it
* returns 0, the governor is bound to the thermal zone,
* otherwise it fails.
* @unbind_from_tz: callback called when a governor is unbound from a
* thermal zone.
thermal: core: Introduce .trip_crossed() callback for thermal governors Introduce a new thermal governor callback called .trip_crossed() that will be invoked whenever a trip point is crossed by the zone temperature, either on the way up or on the way down. The trip crossing direction information will be passed to it and if multiple trips are crossed in the same direction during one thermal zone update, the new callback will be invoked for them in temperature order, either ascending or descending, depending on the trip crossing direction. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-10 16:10:53 +00:00
* @trip_crossed: called for trip points that have just been crossed
thermal: core: Introduce .manage() callback for thermal governors Introduce a new thermal governor callback called .manage() that will be invoked once per thermal zone update after processing all of the trip points in the core. This will allow governors that look at multiple trip points together to check all of them in a consistent configuration, so they don't need to play tricks with skipping .throttle() invocations that they are not interested in and they can avoid carrying out the same computations for multiple times in one cycle. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-10 16:08:12 +00:00
* @manage: called on thermal zone temperature updates
thermal: core: Relocate the struct thermal_governor definition Notice that struct thermal_governor is only used by the thermal core and so move its definition to thermal_core.h. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-04 19:27:07 +00:00
* @update_tz: callback called when thermal zone internals have changed, e.g.
* thermal cooling instance was added/removed
* @governor_list: node in thermal_governor_list (in thermal_core.c)
*/
struct thermal_governor {
const char *name;
int (*bind_to_tz)(struct thermal_zone_device *tz);
void (*unbind_from_tz)(struct thermal_zone_device *tz);
thermal: core: Introduce .trip_crossed() callback for thermal governors Introduce a new thermal governor callback called .trip_crossed() that will be invoked whenever a trip point is crossed by the zone temperature, either on the way up or on the way down. The trip crossing direction information will be passed to it and if multiple trips are crossed in the same direction during one thermal zone update, the new callback will be invoked for them in temperature order, either ascending or descending, depending on the trip crossing direction. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-10 16:10:53 +00:00
void (*trip_crossed)(struct thermal_zone_device *tz,
const struct thermal_trip *trip,
bool crossed_up);
thermal: core: Introduce .manage() callback for thermal governors Introduce a new thermal governor callback called .manage() that will be invoked once per thermal zone update after processing all of the trip points in the core. This will allow governors that look at multiple trip points together to check all of them in a consistent configuration, so they don't need to play tricks with skipping .throttle() invocations that they are not interested in and they can avoid carrying out the same computations for multiple times in one cycle. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-10 16:08:12 +00:00
void (*manage)(struct thermal_zone_device *tz);
thermal: core: Relocate the struct thermal_governor definition Notice that struct thermal_governor is only used by the thermal core and so move its definition to thermal_core.h. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-04 19:27:07 +00:00
void (*update_tz)(struct thermal_zone_device *tz,
enum thermal_notify_event reason);
struct list_head governor_list;
};
thermal: core: Represent suspend-related thermal zone flags as bits Instead of using two separate fields in struct thermal_zone_device for representing flags related to thermal zone suspend, represent them explicitly as bits in one u8 "state" field. Subsequently, that field will be used for addressing race conditions related to thermal zone initialization and exit. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:11:53 +00:00
#define TZ_STATE_FLAG_SUSPENDED BIT(0)
#define TZ_STATE_FLAG_RESUMING BIT(1)
thermal: core: Mark thermal zones as initializing to start with After thermal_zone_device_register_with_trips() has called device_register() and it has registered the new thermal zone device with the driver core, user space may access its sysfs attributes and, among other things, it may enable the thermal zone before it is ready. To address this, introduce a new thermal zone state flag for initialization and set it before calling device_register() in thermal_zone_device_register_with_trips(). This causes __thermal_zone_device_update() to return early until the new flag is cleared. To clear it when the thermal zone is ready, introduce a new function called thermal_zone_init_complete() that will also invoke __thermal_zone_device_update() after clearing that flag (both under the thernal zone lock) and make thermal_zone_device_register_with_trips() call the new function instead of checking need_update and calling thermal_zone_device_update() when it is set. After this change, if user space enables the thermal zone prematurely, __thermal_zone_device_update() will return early for it until thermal_zone_init_complete() is called. In turn, if the thermal zone is not enabled by user space before thermal_zone_init_complete() is called, the __thermal_zone_device_update() call in it will return early because the thermal zone has not been enabled yet, but that function will be invoked again by thermal_zone_device_set_mode() when the thermal zone is enabled and it will not return early this time. The checking of need_update is not necessary any more because the __thermal_zone_device_update() calls potentially triggered by cooling device binding take place before calling thermal_zone_init_complete(), so they all will return early, which means that thermal_zone_init_complete() must call __thermal_zone_device_update() in case the thermal zone is enabled prematurely by user space. Fixes: 203d3d4aa482 ("the generic thermal sysfs driver") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/9360231.CDJkKcVGEf@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:15:04 +00:00
#define TZ_STATE_FLAG_INIT BIT(2)
thermal: core: Mark thermal zones as exiting before unregistration In analogy with a previous change in the thermal zone registration code path, to ensure that __thermal_zone_device_update() will return early for thermal zones that are going away, introduce a thermal zone state flag representing the "exit" state and set it while deleting the thermal zone from thermal_tz_list. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4394176.ejJDZkT8p0@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:26:12 +00:00
#define TZ_STATE_FLAG_EXIT BIT(3)
thermal: core: Represent suspend-related thermal zone flags as bits Instead of using two separate fields in struct thermal_zone_device for representing flags related to thermal zone suspend, represent them explicitly as bits in one u8 "state" field. Subsequently, that field will be used for addressing race conditions related to thermal zone initialization and exit. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:11:53 +00:00
#define TZ_STATE_READY 0
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
/**
* struct thermal_zone_device - structure for a thermal zone
* @id: unique id number for each thermal zone
* @type: the thermal zone device type
* @device: &struct device for this thermal zone
* @removal: removal completion
thermal: core: Synchronize suspend-prepare and post-suspend actions After commit 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") it is theoretically possible that, if a system suspend starts immediately after a system resume, thermal_zone_device_resume() spawned by the thermal PM notifier for one of the thermal zones at the end of the system resume will run after the PM thermal notifier for the suspend-prepare action. If that happens, tz->suspended set by the latter will be reset by the former which may lead to unexpected consequences. To avoid that race, synchronize thermal_zone_device_resume() with the suspend-prepare thermal PM notifier with the help of additional bool field and completion in struct thermal_zone_device. Note that this also ensures running __thermal_zone_device_update() at least once for each thermal zone between system resume and the following system suspend in case it is needed to start thermal mitigation. Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-14 15:22:25 +00:00
* @resume: resume completion
thermal: core: Use trip lists for trip crossing detection Modify the thermal core to use three lists of trip points: trips_high, containing trips with thresholds strictly above the current thermal zone temperature, trips_reached, containing trips with thresholds at or below the current zone temperature, trips_invalid, containing trips with temperature equal to THERMAL_ZONE_INVALID, where the first two lists are always sorted by the current trip threshold. For each trip in trips_high, there is no mitigation under way and the trip threshold is equal to its temperature. In turn, for each trip in trips_reached, there is mitigation under way and the trip threshold is equal to its low temperature. The trips in trips_invalid, of course, need not be taken into consideration. The idea is to make __thermal_zone_device_update() walk trips_high and trips_reached instead of walking the entire table of trip points in a thermal zone. Usually, it will only need to walk a few entries in one of the lists and check one entry in the other list, depending on the direction of the zone temperature changes, because crossing many trips by the zone temperature in one go between two consecutive temperature checks should be unlikely (if it occurs often, the thermal zone temperature should probably be checked more often either or there are too many trips). This also helps to eliminate one temporary trip list used for trip crossing notification (only one temporary list is needed for this purpose instead of two) and the remaining temporary list may be sorted by the current trip threshold value, like the trips_reached list, so the additional notify_temp field in struct thermal_trip_desc is not necessary any more. Moreover, since the trips_reached and trips_high lists are sorted, the "low" and "high" values needed by thermal_zone_set_trips() can be determined in a straightforward way by looking at one end of each list. Of course, additional work is needed in some places in order to maintain the ordering of the lists, but it is limited to situations that should be rare, like updating a trip point temperature or hysteresis, thermal zone initialization, or system resume. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/2003443.usQuhbGJ8B@rjwysocki.net [ rjw: Added a comment to thermal_zone_handle_trips() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-16 11:35:11 +00:00
* @trips_high: trips above the current zone temperature
* @trips_reached: trips below or at the current zone temperature
* @trips_invalid: trips with invalid temperature
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
* @mode: current mode of this thermal zone
* @devdata: private pointer for device private data
* @num_trips: number of trip points the thermal zone supports
* @passive_delay_jiffies: number of jiffies to wait between polls when
* performing passive cooling.
* @polling_delay_jiffies: number of jiffies to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
thermal: core: Back off when polling thermal zones on errors Commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") introduced a polling mechanism by which the thermal core attampts to get a valid temperature value for thermal zones where the .get_temp() callback returns errors to start with (for example, due to initialization ordering woes). However, this polling is carried out periodically ad infinitum and every iteration of it causes a message to be printed to the kernel log which means a lot of log noise on systems where there are thermal zones that never get ready for some reason. It is also not really useful to continuously poll thermal zones that never respond. To address this, modify the thermal core to increase the delay between consecutive thermal zone temperature checks after every check that fails until it reaches a certain maximum value. At that point, the thermal zone in question will be disabled, but user space will be able to reenable it if it believes that the failure is transient. Also change the code to print messages regarding failed temperature checks to the kernel log only twice, once when the thermal zone's .get_temp() callback returns an error for the first time and once when disabling the given thermal zone. In addition, a dev_crit() message will be printed at that point if the given thermal zone contains a critical trip point to notify the system operator about the situation. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/ Reported-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net
2024-07-18 19:01:14 +00:00
* @recheck_delay_jiffies: delay after a failed attempt to determine the zone
* temperature before trying again
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
* @temperature: current temperature. This is only for core code,
* drivers should use thermal_zone_get_temp() to get the
* current temperature
* @last_temperature: previous temperature read
* @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
* @passive: 1 if you've crossed a passive trip point, 0 otherwise.
* @prev_low_trip: the low current temperature if you've crossed a passive
trip point.
* @prev_high_trip: the above current temperature if you've crossed a
passive trip point.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
* @governor: pointer to the governor for this thermal zone
* @governor_data: private pointer for governor data
* @ida: &struct ida to generate unique id for this zone's cooling
* devices
* @lock: lock to protect thermal_instances list
* @node: node in thermal_tz_list (in thermal_core.c)
* @poll_queue: delayed work for polling
* @notify_event: Last notification event
thermal: core: Represent suspend-related thermal zone flags as bits Instead of using two separate fields in struct thermal_zone_device for representing flags related to thermal zone suspend, represent them explicitly as bits in one u8 "state" field. Subsequently, that field will be used for addressing race conditions related to thermal zone initialization and exit. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:11:53 +00:00
* @state: current state of the thermal zone
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
* @trips: array of struct thermal_trip objects
*/
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
struct completion removal;
thermal: core: Synchronize suspend-prepare and post-suspend actions After commit 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") it is theoretically possible that, if a system suspend starts immediately after a system resume, thermal_zone_device_resume() spawned by the thermal PM notifier for one of the thermal zones at the end of the system resume will run after the PM thermal notifier for the suspend-prepare action. If that happens, tz->suspended set by the latter will be reset by the former which may lead to unexpected consequences. To avoid that race, synchronize thermal_zone_device_resume() with the suspend-prepare thermal PM notifier with the help of additional bool field and completion in struct thermal_zone_device. Note that this also ensures running __thermal_zone_device_update() at least once for each thermal zone between system resume and the following system suspend in case it is needed to start thermal mitigation. Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-14 15:22:25 +00:00
struct completion resume;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
struct attribute_group trips_attribute_group;
thermal: core: Use trip lists for trip crossing detection Modify the thermal core to use three lists of trip points: trips_high, containing trips with thresholds strictly above the current thermal zone temperature, trips_reached, containing trips with thresholds at or below the current zone temperature, trips_invalid, containing trips with temperature equal to THERMAL_ZONE_INVALID, where the first two lists are always sorted by the current trip threshold. For each trip in trips_high, there is no mitigation under way and the trip threshold is equal to its temperature. In turn, for each trip in trips_reached, there is mitigation under way and the trip threshold is equal to its low temperature. The trips in trips_invalid, of course, need not be taken into consideration. The idea is to make __thermal_zone_device_update() walk trips_high and trips_reached instead of walking the entire table of trip points in a thermal zone. Usually, it will only need to walk a few entries in one of the lists and check one entry in the other list, depending on the direction of the zone temperature changes, because crossing many trips by the zone temperature in one go between two consecutive temperature checks should be unlikely (if it occurs often, the thermal zone temperature should probably be checked more often either or there are too many trips). This also helps to eliminate one temporary trip list used for trip crossing notification (only one temporary list is needed for this purpose instead of two) and the remaining temporary list may be sorted by the current trip threshold value, like the trips_reached list, so the additional notify_temp field in struct thermal_trip_desc is not necessary any more. Moreover, since the trips_reached and trips_high lists are sorted, the "low" and "high" values needed by thermal_zone_set_trips() can be determined in a straightforward way by looking at one end of each list. Of course, additional work is needed in some places in order to maintain the ordering of the lists, but it is limited to situations that should be rare, like updating a trip point temperature or hysteresis, thermal zone initialization, or system resume. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/2003443.usQuhbGJ8B@rjwysocki.net [ rjw: Added a comment to thermal_zone_handle_trips() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-16 11:35:11 +00:00
struct list_head trips_high;
struct list_head trips_reached;
struct list_head trips_invalid;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
enum thermal_device_mode mode;
void *devdata;
int num_trips;
unsigned long passive_delay_jiffies;
unsigned long polling_delay_jiffies;
thermal: core: Back off when polling thermal zones on errors Commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") introduced a polling mechanism by which the thermal core attampts to get a valid temperature value for thermal zones where the .get_temp() callback returns errors to start with (for example, due to initialization ordering woes). However, this polling is carried out periodically ad infinitum and every iteration of it causes a message to be printed to the kernel log which means a lot of log noise on systems where there are thermal zones that never get ready for some reason. It is also not really useful to continuously poll thermal zones that never respond. To address this, modify the thermal core to increase the delay between consecutive thermal zone temperature checks after every check that fails until it reaches a certain maximum value. At that point, the thermal zone in question will be disabled, but user space will be able to reenable it if it believes that the failure is transient. Also change the code to print messages regarding failed temperature checks to the kernel log only twice, once when the thermal zone's .get_temp() callback returns an error for the first time and once when disabling the given thermal zone. In addition, a dev_crit() message will be printed at that point if the given thermal zone contains a critical trip point to notify the system operator about the situation. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/ Reported-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net
2024-07-18 19:01:14 +00:00
unsigned long recheck_delay_jiffies;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
int temperature;
int last_temperature;
int emul_temperature;
int passive;
int prev_low_trip;
int prev_high_trip;
struct thermal_zone_device_ops ops;
struct thermal_zone_params *tzp;
struct thermal_governor *governor;
void *governor_data;
struct ida ida;
struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
enum thermal_notify_event notify_event;
thermal: core: Represent suspend-related thermal zone flags as bits Instead of using two separate fields in struct thermal_zone_device for representing flags related to thermal zone suspend, represent them explicitly as bits in one u8 "state" field. Subsequently, that field will be used for addressing race conditions related to thermal zone initialization and exit. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:11:53 +00:00
u8 state;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
#ifdef CONFIG_THERMAL_DEBUGFS
struct thermal_debugfs *debugfs;
#endif
thermal: core: Add user thresholds support The user thresholds mechanism is a way to have the userspace to tell the thermal framework to send a notification when a temperature limit is crossed. There is no id, no hysteresis, just the temperature and the direction of the limit crossing. That means we can be notified when a threshold is crossed the way up only, or the way down only or both ways. That allows to create hysteresis values if it is needed. A threshold can be added, deleted or flushed. The latter means all thresholds belonging to a thermal zone will be deleted. When a threshold is added: - if the same threshold (temperature and direction) exists, an error is returned - if a threshold is specified with the same temperature but a different direction, the specified direction is added - if there is no threshold with the same temperature then it is created When a threshold is deleted: - if the same threshold (temperature and direction) exists, it is deleted - if a threshold is specified with the same temperature but a different direction, the specified direction is removed - if there is no threshold with the same temperature, then an error is returned When the threshold are flushed: - All thresholds related to a thermal zone are deleted When a threshold is crossed: - the userspace does not need to know which threshold(s) have been crossed, it will be notified with the current temperature and the previous temperature - if multiple thresholds have been crossed between two updates only one notification will be send to the userspace, it is pointless to send a notification per thresholds crossed as the userspace can handle that easily when it has the temperature delta information Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org [ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-23 09:59:57 +00:00
struct list_head user_thresholds;
thermal: core: Make struct thermal_zone_device definition internal Move the definitions of struct thermal_trip_desc and struct thermal_zone_device to an internal header file in the thermal core, as they don't need to be accessible to any code other than the thermal core and so they don't need to be present in a global header. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-02 18:57:57 +00:00
struct thermal_trip_desc trips[] __counted_by(num_trips);
};
thermal: core: Add and use thermal zone guard Add and use a guard for thermal zone locking. This allows quite a few error code paths to be simplified among other things and brings in a noticeable code size reduction for a good measure. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/1930069.tdWV9SEqCh@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-10 22:05:25 +00:00
DEFINE_GUARD(thermal_zone, struct thermal_zone_device *, mutex_lock(&_T->lock),
mutex_unlock(&_T->lock))
thermal: core: Add and use a reverse thermal zone guard Add a guard for unlocking a locked thermal zone temporarily and use it in thermal_zone_pm_prepare(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/3344086.aeNJFYEL58@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-10 22:07:11 +00:00
DEFINE_GUARD(thermal_zone_reverse, struct thermal_zone_device *,
mutex_unlock(&_T->lock), mutex_lock(&_T->lock))
thermal: core: Allow thermal zones to tell the core to ignore them The iwlwifi wireless driver registers a thermal zone that is only needed when the network interface handled by it is up and it wants that thermal zone to be effectively ignored by the core otherwise. Before commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") that could be achieved by returning an error code from the thermal zone's .get_temp() callback because the core did not really handle errors returned by it almost at all. However, commit a8a261774466 made the core attempt to recover from the situation in which the temperature of a thermal zone cannot be determined due to errors returned by its .get_temp() and is always invalid from the core's perspective. That was done because there are thermal zones in which .get_temp() returns errors to start with due to some difficulties related to the initialization ordering, but then it will start to produce valid temperature values at one point. Unfortunately, the simple approach taken by commit a8a261774466, which is to poll the thermal zone periodically until its .get_temp() callback starts to return valid temperature values, is at odds with the special thermal zone in iwlwifi in which .get_temp() may always return an error because its network interface may always be down. If that happens, every attempt to invoke the thermal zone's .get_temp() callback resulting in an error causes the thermal core to print a dev_warn() message to the kernel log which is super-noisy. To address this problem, make the core handle the case in which .get_temp() returns 0, but the temperature value returned by it is not actually valid, in a special way. Namely, make the core completely ignore the invalid temperature value coming from .get_temp() in that case, which requires folding in update_temperature() into its caller and a few related changes. On the iwlwifi side, modify iwl_mvm_tzone_get_temp() to return 0 and put THERMAL_TEMP_INVALID into the temperature return memory location instead of returning an error when the firmware is not running or it is not of the right type. Also, to clearly separate the handling of invalid temperature values from the thermal zone initialization, introduce a special THERMAL_TEMP_INIT value specifically for the latter purpose. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Closes: https://lore.kernel.org/linux-pm/20240715044527.GA1544@sol.localdomain/ Reported-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=201761 Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: 6.10+ <stable@vger.kernel.org> # 6.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4950004.31r3eYUQgx@rjwysocki.net [ rjw: Rebased on top of the current mainline ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-07-17 19:45:02 +00:00
/* Initial thermal zone temperature. */
#define THERMAL_TEMP_INIT INT_MIN
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") caused __thermal_zone_device_update() to return early if the current thermal zone temperature was invalid. This was done to avoid running handle_thermal_trip() and governor callbacks in that case which led to confusion. However, it went too far because monitor_thermal_zone() still needs to be called even when the zone temperature is invalid to ensure that it will be updated eventually in case thermal polling is enabled and the driver has no other means to notify the core of zone temperature changes (for example, it does not register an interrupt handler or ACPI notifier). Also if the .set_trips() zone callback is expected to set up monitoring interrupts for a thermal zone, it has to be provided with valid boundaries and that can only happen if the zone temperature is known. Accordingly, to ensure that __thermal_zone_device_update() will run again after a failing zone temperature check, make it call monitor_thermal_zone() regardless of whether or not the zone temperature is valid and make the latter schedule a thermal zone temperature update if the zone temperature is invalid even if polling is not enabled for the thermal zone. Fixes: 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net [ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-28 12:10:03 +00:00
/*
thermal: core: Back off when polling thermal zones on errors Commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") introduced a polling mechanism by which the thermal core attampts to get a valid temperature value for thermal zones where the .get_temp() callback returns errors to start with (for example, due to initialization ordering woes). However, this polling is carried out periodically ad infinitum and every iteration of it causes a message to be printed to the kernel log which means a lot of log noise on systems where there are thermal zones that never get ready for some reason. It is also not really useful to continuously poll thermal zones that never respond. To address this, modify the thermal core to increase the delay between consecutive thermal zone temperature checks after every check that fails until it reaches a certain maximum value. At that point, the thermal zone in question will be disabled, but user space will be able to reenable it if it believes that the failure is transient. Also change the code to print messages regarding failed temperature checks to the kernel log only twice, once when the thermal zone's .get_temp() callback returns an error for the first time and once when disabling the given thermal zone. In addition, a dev_crit() message will be printed at that point if the given thermal zone contains a critical trip point to notify the system operator about the situation. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/ Reported-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net
2024-07-18 19:01:14 +00:00
* Default and maximum delay after a failed thermal zone temperature check
* before attempting to check it again (in jiffies).
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") caused __thermal_zone_device_update() to return early if the current thermal zone temperature was invalid. This was done to avoid running handle_thermal_trip() and governor callbacks in that case which led to confusion. However, it went too far because monitor_thermal_zone() still needs to be called even when the zone temperature is invalid to ensure that it will be updated eventually in case thermal polling is enabled and the driver has no other means to notify the core of zone temperature changes (for example, it does not register an interrupt handler or ACPI notifier). Also if the .set_trips() zone callback is expected to set up monitoring interrupts for a thermal zone, it has to be provided with valid boundaries and that can only happen if the zone temperature is known. Accordingly, to ensure that __thermal_zone_device_update() will run again after a failing zone temperature check, make it call monitor_thermal_zone() regardless of whether or not the zone temperature is valid and make the latter schedule a thermal zone temperature update if the zone temperature is invalid even if polling is not enabled for the thermal zone. Fixes: 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net [ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-28 12:10:03 +00:00
*/
thermal: core: Back off when polling thermal zones on errors Commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") introduced a polling mechanism by which the thermal core attampts to get a valid temperature value for thermal zones where the .get_temp() callback returns errors to start with (for example, due to initialization ordering woes). However, this polling is carried out periodically ad infinitum and every iteration of it causes a message to be printed to the kernel log which means a lot of log noise on systems where there are thermal zones that never get ready for some reason. It is also not really useful to continuously poll thermal zones that never respond. To address this, modify the thermal core to increase the delay between consecutive thermal zone temperature checks after every check that fails until it reaches a certain maximum value. At that point, the thermal zone in question will be disabled, but user space will be able to reenable it if it believes that the failure is transient. Also change the code to print messages regarding failed temperature checks to the kernel log only twice, once when the thermal zone's .get_temp() callback returns an error for the first time and once when disabling the given thermal zone. In addition, a dev_crit() message will be printed at that point if the given thermal zone contains a critical trip point to notify the system operator about the situation. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/ Reported-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net
2024-07-18 19:01:14 +00:00
#define THERMAL_RECHECK_DELAY msecs_to_jiffies(250)
#define THERMAL_MAX_RECHECK_DELAY (120 * HZ)
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") caused __thermal_zone_device_update() to return early if the current thermal zone temperature was invalid. This was done to avoid running handle_thermal_trip() and governor callbacks in that case which led to confusion. However, it went too far because monitor_thermal_zone() still needs to be called even when the zone temperature is invalid to ensure that it will be updated eventually in case thermal polling is enabled and the driver has no other means to notify the core of zone temperature changes (for example, it does not register an interrupt handler or ACPI notifier). Also if the .set_trips() zone callback is expected to set up monitoring interrupts for a thermal zone, it has to be provided with valid boundaries and that can only happen if the zone temperature is known. Accordingly, to ensure that __thermal_zone_device_update() will run again after a failing zone temperature check, make it call monitor_thermal_zone() regardless of whether or not the zone temperature is valid and make the latter schedule a thermal zone temperature update if the zone temperature is invalid even if polling is not enabled for the thermal zone. Fixes: 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net [ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-28 12:10:03 +00:00
thermal: Move default governor config option to the internal header The default governor set at compilation time is a thermal internal business, no need to export to the global thermal header. Move the config options to the internal header. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200402142747.8307-1-daniel.lezcano@linaro.org
2020-04-02 14:27:39 +00:00
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
#define DEFAULT_THERMAL_GOVERNOR "step_wise"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
#define DEFAULT_THERMAL_GOVERNOR "fair_share"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
#define DEFAULT_THERMAL_GOVERNOR "user_space"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
#define DEFAULT_THERMAL_GOVERNOR "power_allocator"
thermal: Allow selecting the bang-bang governor as default For many setups the bang-bang governor is exactly what we want. Many ARM SoC-based devices use fans to cool down the entire SoC and that works well only with the bang-bang governor because it uses the hysteresis in order to let the fan run for a while to cool the SoC down below the trip point before switching it off again. The step-wise governor will behave strangely in these situations. It doesn't use the hysteresis, so it can lead to situations where the fan is turned on for only a very brief period and then is switched back off, only to get switched back on again very quickly because the SoC hasn't cooled down very much. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230609124408.3788680-1-thierry.reding@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-06-09 12:44:08 +00:00
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG)
#define DEFAULT_THERMAL_GOVERNOR "bang_bang"
thermal: Move default governor config option to the internal header The default governor set at compilation time is a thermal internal business, no need to export to the global thermal header. Move the config options to the internal header. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200402142747.8307-1-daniel.lezcano@linaro.org
2020-04-02 14:27:39 +00:00
#endif
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
/* Initial state of a cooling device during binding */
#define THERMAL_NO_TARGET -1UL
thermal/drivers/core: Add init section table for self-encapsulation Currently the governors are declared in their respective files but they export their [un]register functions which in turn call the [un]register governors core's functions. That implies a cyclic dependency which is not desirable. There is a way to self-encapsulate the governors by letting them to declare themselves in a __init section table. Define the table in the asm generic linker description like the other tables and provide the specific macros to deal with. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-06-12 20:13:24 +00:00
/* Init section thermal table */
extern struct thermal_governor *__governor_thermal_table[];
extern struct thermal_governor *__governor_thermal_table_end[];
#define THERMAL_TABLE_ENTRY(table, name) \
static typeof(name) *__thermal_table_entry_##name \
treewide: Convert macro and uses of __section(foo) to __section("foo") Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-22 02:36:07 +00:00
__used __section("__" #table "_thermal_table") = &name
thermal/drivers/core: Add init section table for self-encapsulation Currently the governors are declared in their respective files but they export their [un]register functions which in turn call the [un]register governors core's functions. That implies a cyclic dependency which is not desirable. There is a way to self-encapsulate the governors by letting them to declare themselves in a __init section table. Define the table in the asm generic linker description like the other tables and provide the specific macros to deal with. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-06-12 20:13:24 +00:00
#define THERMAL_GOVERNOR_DECLARE(name) THERMAL_TABLE_ENTRY(governor, name)
#define for_each_governor_table(__governor) \
for (__governor = __governor_thermal_table; \
__governor < __governor_thermal_table_end; \
__governor++)
thermal: core: Add helpers to browse the cdev, tz and governor list The cdev, tz and governor list, as well as their respective locks are statically defined in the thermal_core.c file. In order to give a sane access to these list, like browsing all the thermal zones or all the cooling devices, let's define a set of helpers where we pass a callback as a parameter to be called for each thermal entity. We keep the self-encapsulation and ensure the locks are correctly taken when looking at the list. Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706105538.2159-1-daniel.lezcano@linaro.org
2020-07-06 10:55:35 +00:00
int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
void *);
int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
void *), void *);
int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
void *thermal_governor);
thermal: core: Get thermal zone by id The next patch will introduce the generic netlink protocol to handle events, sampling and command from the thermal framework. In order to deal with the thermal zone, it uses its unique identifier to characterize it in the message. Passing an integer is more efficient than passing an entire string. This change provides a function returning back a thermal zone pointer corresponding to the identifier passed as parameter. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-2-daniel.lezcano@linaro.org
2020-07-06 10:55:36 +00:00
struct thermal_zone_device *thermal_zone_get_by_id(int id);
thermal: core: Reference count the zone in thermal_zone_get_by_id() There are places in the thermal netlink code where nothing prevents the thermal zone object from going away while being accessed after it has been returned by thermal_zone_get_by_id(). To address this, make thermal_zone_get_by_id() get a reference on the thermal zone device object to be returned with the help of get_device(), under thermal_list_lock, and adjust all of its callers to this change with the help of the cleanup.h infrastructure. Fixes: 1ce50e7d408e ("thermal: core: genetlink support for events/cmd/sampling") Cc: 6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/6112242.lOV4Wx5bFT@rjwysocki.net
2024-10-03 12:25:58 +00:00
DEFINE_CLASS(thermal_zone_get_by_id, struct thermal_zone_device *,
if (_T) put_device(&_T->device), thermal_zone_get_by_id(id), int id)
thermal: Move internal IPA functions The exported IPA functions are used by the IPA. It is pointless to declare the functions in the thermal.h file. For better self-encapsulation and less impact for the compilation if a change is made on it. Move the code in the thermal core internal header file. As the users depends on THERMAL then it is pointless to have the stub, remove them. Take also the opportunity to fix checkpatch warnings/errors when moving the code around. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200402142747.8307-3-daniel.lezcano@linaro.org
2020-04-02 14:27:41 +00:00
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{
return cdev->ops->get_requested_power && cdev->ops->state2power &&
cdev->ops->power2state;
}
thermal/core: Make cooling device state change private The change of the cooling device state should be used by the governor or at least by the core code, not by the drivers themselves. Remove the API usage and move the function declaration to the internal headers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20210118173824.9970-1-daniel.lezcano@linaro.org
2021-01-18 17:38:24 +00:00
void thermal_cdev_update(struct thermal_cooling_device *);
thermal: core: Introduce thermal_cdev_update_nocheck() Three thermal governors call __thermal_cdev_update() under the cdev lock without doing any checks, so in order to reduce the related code duplication, introduce a new helper function called thermal_cdev_update_nocheck() for them and make them use it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/1835097.VLH7GnMWUR@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-10 22:16:54 +00:00
void thermal_cdev_update_nocheck(struct thermal_cooling_device *cdev);
thermal/core: Create a helper __thermal_cdev_update() without a lock There is a need to have a helper function which updates cooling device state from the governors code. With this change governor can use lock and unlock while calling helper function. This avoid unnecessary second time lock/unlock which was in previous solution present in governor implementation. This new helper function must be called with mutex 'cdev->lock' hold. The changed been discussed and part of code presented in thread: https://lore.kernel.org/linux-pm/20210419084536.25000-1-lukasz.luba@arm.com/ Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210422114308.29684-2-lukasz.luba@arm.com
2021-04-22 11:43:06 +00:00
void __thermal_cdev_update(struct thermal_cooling_device *cdev);
thermal/core: Make cooling device state change private The change of the cooling device state should be used by the governor or at least by the core code, not by the drivers themselves. Remove the API usage and move the function declaration to the internal headers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20210118173824.9970-1-daniel.lezcano@linaro.org
2021-01-18 17:38:24 +00:00
thermal: core: Pass trip pointer to governor throttle callback Modify the governor .throttle() callback definition so that it takes a trip pointer instead of a trip index as its second argument, adjust the governors accordingly and update the core code invoking .throttle(). This causes the governors to become independent of the representation of the list of trips in the thermal zone structure. This change is not expected to alter the general functionality. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-10-12 18:34:50 +00:00
int get_tz_trend(struct thermal_zone_device *tz, const struct thermal_trip *trip);
thermal: Move get_tz_trend to the internal header The function is not used any place other than the thermal directory. It does not make sense to export its definition in the global header as there is no use of it. Move the definition to the internal header and allow better self-encapsulation. Take the opportunity to add the parameter names to make checkpatch happy and remove the pointless stubs. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200402142747.8307-5-daniel.lezcano@linaro.org
2020-04-02 14:27:43 +00:00
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
/*
* This structure is used to describe the behavior of
* a certain cooling device on a certain trip point
* in a certain thermal zone
*/
struct thermal_instance {
int id;
char name[THERMAL_NAME_LENGTH];
struct thermal_cooling_device *cdev;
thermal: core: Store trip pointer in struct thermal_instance Replace the integer trip number stored in struct thermal_instance with a pointer to the relevant trip and adjust the code using the structure in question accordingly. The main reason for making this change is to allow the trip point to cooling device binding code more straightforward, as illustrated by subsequent modifications of the ACPI thermal driver, but it also helps to clarify the overall design and allows the governor code overhead to be reduced (through subsequent modifications). The only case in which it adds complexity is trip_point_show() that needs to walk the trips[] table to find the index of the given trip point, but this is not a critical path and the interface that trip_point_show() belongs to is problematic anyway (for instance, it doesn't cover the case when the same cooling devices is associated with multiple trip points). This is a preliminary change and the affected code will be refined by a series of subsequent modifications of thermal governors, the core and the ACPI thermal driver. The general functionality is not expected to be affected by this change. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-09-21 17:52:44 +00:00
const struct thermal_trip *trip;
Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. CC: <stable@vger.kernel.org> #3.18+ Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-10-30 08:31:47 +00:00
bool initialized;
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
unsigned long upper; /* Highest cooling state for this trip point */
unsigned long lower; /* Lowest cooling state for this trip point */
unsigned long target; /* expected cooling state */
char attr_name[THERMAL_NAME_LENGTH];
struct device_attribute attr;
thermal: export weight to sysfs It's useful to have access to the weights for the cooling devices for thermal zones and change them if needed. Export them to sysfs. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-18 16:04:24 +00:00
char weight_attr_name[THERMAL_NAME_LENGTH];
struct device_attribute weight_attr;
thermal: core: Move lists of thermal instances to trip descriptors In almost all places where a thermal zone's list of thermal instances is walked, there is a check to match a specific trip point and it is walked in vain whenever there are no cooling devices associated with the given trip. To address this, store the lists of thermal instances in trip point descriptors instead of storing them in thermal zones and adjust all code using those lists accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5522726.Sb9uPGUboI@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-10-04 19:39:19 +00:00
struct list_head trip_node; /* node in trip->thermal_instances */
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
struct list_head cdev_node; /* node in cdev->thermal_instances */
thermal: of: fix cooling device weights in device tree Currently you can specify the weight of the cooling device in the device tree but that information is not populated to the thermal_bind_params where the fair share governor expects it to be. The of thermal zone device doesn't have a thermal_bind_params structure and arguably it's better to pass the weight inside the thermal_instance as it is specific to the bind of a cooling device to a thermal zone parameter. Core thermal code is fixed to populate the weight in the instance from the thermal_bind_params, so platform code that was passing the weight inside the thermal_bind_params continue to work seamlessly. While we are at it, create a default value for the weight parameter for those thermal zones that currently don't define it and remove the hardcoded default in of-thermal. Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-18 16:04:21 +00:00
unsigned int weight; /* The weight of the cooling device */
thermal: core: Introduce thermal_cooling_device_update() Introduce a core thermal API function, thermal_cooling_device_update(), for updating the max_state value for a cooling device and rearranging its statistics in sysfs after a possible change of its ->get_max_state() callback return value. That callback is now invoked only once, during cooling device registration, to populate the max_state field in the cooling device object, so if its return value changes, it needs to be invoked again and the new return value needs to be stored as max_state. Moreover, the statistics presented in sysfs need to be rearranged in general, because there may not be enough room in them to store data for all of the possible states (in the case when max_state grows). The new function takes care of that (and some other minor things related to it), but some extra locking and lockdep annotations are added in several places too to protect against crashes in the cases when the statistics are not present or when a stale max_state value might be used by sysfs attributes. Note that the actual user of the new function will be added separately. Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com>
2023-03-17 17:01:26 +00:00
bool upper_no_limit;
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
};
thermal: core: move to_thermal_zone() macro to header file Simply making this macro available to other thermal core files. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:08:57 +00:00
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
thermal: core: move to_cooling_device macro to header file Make the to_cooling_device() macro available across files in thermal core. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:09:01 +00:00
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
Thermal: build thermal governors into thermal_sys module The thermal governors are part of the thermal framework, rather than a seperate feature/module. Because the generic thermal layer can not work without thermal governors, and it must load the thermal governors during its initialization. Build them into one module in this patch. This also fix a problem that the generic thermal layer does not work when CONFIG_THERMAL=m and CONFIG_THERMAL_GOV_XXX=y. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Acked-by: Durgadoss R <durgadoss.r@intel.com>
2013-03-26 08:38:29 +00:00
int thermal_register_governor(struct thermal_governor *);
void thermal_unregister_governor(struct thermal_governor *);
thermal: core: split policy_store Similarly to passive_store, policy_store now is split between thermal core data structure handling and sysfs handling. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:08:55 +00:00
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
thermal: core: split available_policies_show() This patch creates a helper to build a list of available governors. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:08:56 +00:00
int thermal_build_list_of_policies(char *buf);
thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex Protect access to thermal operations against thermal zone removal by acquiring the thermal zone device mutex. After acquiring the mutex, check if the thermal zone device is registered and abort the operation if not. With this change, we can call __thermal_zone_device_update() instead of thermal_zone_device_update() from trip_point_temp_store() and from emul_temp_store(). Similar, we can call __thermal_zone_set_trips() instead of thermal_zone_set_trips() from trip_point_hyst_store(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-11-10 15:24:58 +00:00
void __thermal_zone_device_update(struct thermal_zone_device *tz,
enum thermal_notify_event event);
reboot: Introduce thermal_zone_device_critical_reboot() Introduce thermal_zone_device_critical_reboot() to trigger an emergency reboot. It is a counterpart of thermal_zone_device_critical() with the difference that it will force a reboot instead of shutdown. The motivation for doing this is to allow the thermal subystem to trigger a reboot when the temperature reaches the critical temperature. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20231129124330.519423-3-festevam@gmail.com
2023-11-29 12:43:29 +00:00
void thermal_zone_device_critical_reboot(struct thermal_zone_device *tz);
thermal: core: Add governor callback for thermal zone change Add a new callback to the struct thermal_governor. It can be used for updating governors when there is a change in the thermal zone internals, e.g. thermal cooling device is bind to the thermal zone. That makes possible to move some heavy operations like memory allocations related to the number of cooling instances out of the throttle() callback. Both callback code paths (throttle() and update_tz()) are protected with the same thermal zone lock, which guaranties the consistency. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-12-20 23:17:45 +00:00
void thermal_governor_update_tz(struct thermal_zone_device *tz,
enum thermal_notify_event reason);
Thermal: build thermal governors into thermal_sys module The thermal governors are part of the thermal framework, rather than a seperate feature/module. Because the generic thermal layer can not work without thermal governors, and it must load the thermal governors during its initialization. Build them into one module in this patch. This also fix a problem that the generic thermal layer does not work when CONFIG_THERMAL=m and CONFIG_THERMAL_GOV_XXX=y. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Acked-by: Durgadoss R <durgadoss.r@intel.com>
2013-03-26 08:38:29 +00:00
thermal: core: Make thermal_zone_set_trips private The function thermal_zone_set_trips() is used by the thermal core code in order to update the next trip points, there are no other users. Move the function definition in the thermal_core.h, remove the EXPORT_SYMBOL_GPL and document the function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200331165449.30355-1-daniel.lezcano@linaro.org
2020-03-31 16:54:48 +00:00
/* Helpers */
thermal: core: Move threshold out of struct thermal_trip The threshold field in struct thermal_trip is only used internally by the thermal core and it is better to prevent drivers from misusing it. It also takes some space unnecessarily in the trip tables passed by drivers to the core during thermal zone registration. For this reason, introduce struct thermal_trip_desc as a wrapper around struct thermal_trip, move the threshold field directly into it and make the thermal core store struct thermal_trip_desc objects in the internal thermal zone trip tables. Adjust all of the code using trip tables in the thermal core accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2024-04-02 18:56:43 +00:00
#define for_each_trip_desc(__tz, __td) \
for (__td = __tz->trips; __td - __tz->trips < __tz->num_trips; __td++)
#define trip_to_trip_desc(__trip) \
container_of(__trip, struct thermal_trip_desc, trip)
thermal: trip: Define for_each_trip() macro Define a new macro for_each_trip() to be used by the thermal core code and thermal governors for walking trips in a given thermal zone. Modify for_each_thermal_trip() to use this macro instead of an open- coded loop over trips. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2023-10-12 18:26:46 +00:00
thermal: trip: Use common set of trip type names Use the same set of trip type names in sysfs and in the thermal debug code output. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-05-28 15:00:51 +00:00
const char *thermal_trip_type_name(enum thermal_trip_type trip_type);
thermal/core: Compute low and high boundaries in thermal_zone_device_update() In order to set the scene for the thresholds support which have to manipulate the low and high temperature boundaries for the interrupt support, we must pass the low and high values to the incoming thresholds routine. The variables are set from the thermal_zone_set_trips() where the function loops the thermal trips to figure out the next and the previous temperatures to set the interrupt to be triggered when they are crossed. These variables will be needed by the function in charge of handling the thresholds in the incoming changes but they are local to the aforementioned function thermal_zone_set_trips(). Move the low and high boundaries computation out of the function in thermal_zone_device_update() so they are accessible from there. The positive side effect is they are computed in the same loop as handle_thermal_trip(), so we remove one loop. Co-developed-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20240816081241.1925221-2-daniel.lezcano@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-16 08:12:32 +00:00
void thermal_zone_set_trips(struct thermal_zone_device *tz, int low, int high);
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id() Because thermal_zone_trip_id() does not update the thermal zone object passed to it, its pointer argument representing the thermal zone can be const, so adjust its definition accordingly. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
2023-12-15 19:53:52 +00:00
int thermal_zone_trip_id(const struct thermal_zone_device *tz,
thermal: core: Store trip pointer in struct thermal_instance Replace the integer trip number stored in struct thermal_instance with a pointer to the relevant trip and adjust the code using the structure in question accordingly. The main reason for making this change is to allow the trip point to cooling device binding code more straightforward, as illustrated by subsequent modifications of the ACPI thermal driver, but it also helps to clarify the overall design and allows the governor code overhead to be reduced (through subsequent modifications). The only case in which it adds complexity is trip_point_show() that needs to walk the trips[] table to find the index of the given trip point, but this is not a critical path and the interface that trip_point_show() belongs to is problematic anyway (for instance, it doesn't cover the case when the same cooling devices is associated with multiple trip points). This is a preliminary change and the affected code will be refined by a series of subsequent modifications of thermal governors, the core and the ACPI thermal driver. The general functionality is not expected to be affected by this change. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-09-21 17:52:44 +00:00
const struct thermal_trip *trip);
thermal/core: Move the mutex inside the thermal_zone_device_update() function All the different calls inside the thermal_zone_device_update() function take the mutex. The previous changes move the mutex out of the different functions, like the throttling ops. Now that the mutexes are all at the same level in the call stack for the thermal_zone_device_update() function, they can be moved inside this one. That has the benefit of: 1. Simplify the code by not having a plethora of places where the lock is taken 2. Probably closes more race windows because releasing the lock from one line to another can give the opportunity to the thermal zone to change its state in the meantime. For example, the thermal zone can be enabled right after checking it is disabled. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220805153834.2510142-5-daniel.lezcano@linaro.org
2022-08-05 15:38:34 +00:00
int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
thermal: sysfs: Refine the handling of trip hysteresis changes Change trip_point_hyst_store() and replace thermal_zone_trip_updated() with thermal_zone_set_trip_hyst() to follow the trip_point_temp_store() code pattern for more consistency. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5508466.Sb9uPGUboI@rjwysocki.net
2024-07-29 16:27:25 +00:00
void thermal_zone_set_trip_hyst(struct thermal_zone_device *tz,
struct thermal_trip *trip, int hyst);
thermal: core: Make thermal_zone_set_trips private The function thermal_zone_set_trips() is used by the thermal core code in order to update the next trip points, there are no other users. Move the function definition in the thermal_core.h, remove the EXPORT_SYMBOL_GPL and document the function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200331165449.30355-1-daniel.lezcano@linaro.org
2020-03-31 16:54:48 +00:00
thermal: core: move thermal_zone sysfs to thermal_sysfs.c This is a code reorganization, simply to concentrate the code handling sysfs in a specific file: thermal_sysfs.c. Right now, moving only the sysfs entries of thermal_zone_device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:09:00 +00:00
/* sysfs I/F */
thermal: core: Add flags to struct thermal_trip In order to allow thermal zone creators to specify the writability of trip point temperature and hysteresis on a per-trip basis, add a flags field to struct thermal_trip and define flags to represent the desired trip properties. Also make thermal_zone_device_register_with_trips() set the THERMAL_TRIP_FLAG_RW_TEMP flag for all trips covered by the writable trips mask passed to it and modify the thermal sysfs code to look at the trip flags instead of using the writable trips mask directly or checking the presence of the .set_trip_hyst() zone callback. Additionally, make trip_point_temp_store() and trip_point_hyst_store() fail with an error code if the trip passed to one of them has THERMAL_TRIP_FLAG_RW_TEMP or THERMAL_TRIP_FLAG_RW_HYST, respectively, clear in its flags. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-02-22 17:30:49 +00:00
int thermal_zone_create_device_groups(struct thermal_zone_device *tz);
thermal: core: Add some new helper functions to free resources In order to easily free resources allocated by 'thermal_zone_create_device_groups()' we need 2 new helper functions. The first one undoes 'thermal_zone_create_device_groups()'. The 2nd one undoes 'create_trip_attrs()', which is a function called by 'thermal_zone_create_device_groups()'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-08-08 14:39:52 +00:00
void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
thermal: core: move cooling device sysfs to thermal_sysfs.c This is a code reorganization, simply to concentrate the sysfs handling functions in thermal_sysfs.c. This patch moves the cooling device handling functions. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:09:02 +00:00
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 10:56:25 +00:00
void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
thermal: core: Introduce thermal_cooling_device_update() Introduce a core thermal API function, thermal_cooling_device_update(), for updating the max_state value for a cooling device and rearranging its statistics in sysfs after a possible change of its ->get_max_state() callback return value. That callback is now invoked only once, during cooling device registration, to populate the max_state field in the cooling device object, so if its return value changes, it needs to be invoked again and the new return value needs to be stored as max_state. Moreover, the statistics presented in sysfs need to be rearranged in general, because there may not be enough room in them to store data for all of the possible states (in the case when max_state grows). The new function takes care of that (and some other minor things related to it), but some extra locking and lockdep annotations are added in several places too to protect against crashes in the cases when the statistics are not present or when a stale max_state value might be used by sysfs attributes. Note that the actual user of the new function will be added separately. Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com>
2023-03-17 17:01:26 +00:00
void thermal_cooling_device_stats_reinit(struct thermal_cooling_device *cdev);
thermal: core: move cooling device sysfs to thermal_sysfs.c This is a code reorganization, simply to concentrate the sysfs handling functions in thermal_sysfs.c. This patch moves the cooling device handling functions. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:09:02 +00:00
/* used only at binding time */
thermal: Shorten name of sysfs callbacks The naming isn't consistent across all sysfs callbacks in the thermal core, some have a short name like type_show() and others have long names like thermal_cooling_device_weight_show(). This patch tries to make it consistent by shortening the name of sysfs callbacks. Some of the sysfs files are named similarly for both thermal zone and cooling device (like: type) and to avoid name clash between their show/store routines, the cooling device specific sysfs callbacks are prefixed with "cdev_". Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-03 09:49:03 +00:00
ssize_t trip_point_show(struct device *, struct device_attribute *, char *);
ssize_t weight_show(struct device *, struct device_attribute *, char *);
ssize_t weight_store(struct device *, struct device_attribute *, const char *,
size_t);
thermal: core: move thermal_zone sysfs to thermal_sysfs.c This is a code reorganization, simply to concentrate the code handling sysfs in a specific file: thermal_sysfs.c. Right now, moving only the sysfs entries of thermal_zone_device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-11-08 05:09:00 +00:00
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 10:56:25 +00:00
#ifdef CONFIG_THERMAL_STATISTICS
void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state);
#else
static inline void
thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state) {}
#endif /* CONFIG_THERMAL_STATISTICS */
Thermal: Move thermal_instance to thermal_core.h This patch creates a thermal_core.h file which can contain all defines used by the core thermal framework files. For now, move the thermal_instance structure to thermal_core.h This structure is used by files under drivers/thermal/. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-18 05:34:53 +00:00
#endif /* __THERMAL_CORE_H__ */
Reference in New Issue Copy Permalink