linux-stable/net/bluetooth/hci_conn.c

3067 lines
75 KiB
C
Raw Normal View History

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
Copyright 2023-2024 NXP
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/* Bluetooth HCI connection handling. */
#include <linux/export.h>
#include <linux/debugfs.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
#include <net/bluetooth/iso.h>
#include <net/bluetooth/mgmt.h>
#include "smp.h"
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
#include "eir.h"
struct sco_param {
u16 pkt_type;
u16 max_latency;
u8 retrans_effort;
};
struct conn_handle_t {
struct hci_conn *conn;
__u16 handle;
};
static const struct sco_param esco_param_cvsd[] = {
{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a, 0x01 }, /* S3 */
{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007, 0x01 }, /* S2 */
{ EDR_ESCO_MASK | ESCO_EV3, 0x0007, 0x01 }, /* S1 */
{ EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0x01 }, /* D1 */
{ EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0x01 }, /* D0 */
};
static const struct sco_param sco_param_cvsd[] = {
{ EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0xff }, /* D1 */
{ EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0xff }, /* D0 */
};
static const struct sco_param esco_param_msbc[] = {
{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d, 0x02 }, /* T2 */
{ EDR_ESCO_MASK | ESCO_EV3, 0x0008, 0x02 }, /* T1 */
};
/* This function requires the caller holds hdev->lock */
void hci_connect_le_scan_cleanup(struct hci_conn *conn, u8 status)
{
struct hci_conn_params *params;
struct hci_dev *hdev = conn->hdev;
struct smp_irk *irk;
bdaddr_t *bdaddr;
u8 bdaddr_type;
bdaddr = &conn->dst;
bdaddr_type = conn->dst_type;
/* Check if we need to convert to identity address */
irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
if (irk) {
bdaddr = &irk->bdaddr;
bdaddr_type = irk->addr_type;
}
params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
bdaddr_type);
if (!params)
return;
if (params->conn) {
hci_conn_drop(params->conn);
hci_conn_put(params->conn);
params->conn = NULL;
}
if (!params->explicit_connect)
return;
/* If the status indicates successful cancellation of
* the attempt (i.e. Unknown Connection Id) there's no point of
* notifying failure since we'll go back to keep trying to
* connect. The only exception is explicit connect requests
* where a timeout + cancel does indicate an actual failure.
*/
if (status && status != HCI_ERROR_UNKNOWN_CONN_ID)
mgmt_connect_failed(hdev, conn, status);
/* The connection attempt was doing scan for new RPA, and is
* in scan phase. If params are not associated with any other
* autoconnect action, remove them completely. If they are, just unmark
* them as waiting for connection, by clearing explicit_connect field.
*/
params->explicit_connect = false;
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-18 22:04:31 +00:00
hci_pend_le_list_del_init(params);
switch (params->auto_connect) {
case HCI_AUTO_CONN_EXPLICIT:
hci_conn_params_del(hdev, bdaddr, bdaddr_type);
/* return instead of break to avoid duplicate scan update */
return;
case HCI_AUTO_CONN_DIRECT:
case HCI_AUTO_CONN_ALWAYS:
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-18 22:04:31 +00:00
hci_pend_le_list_add(params, &hdev->pend_le_conns);
break;
case HCI_AUTO_CONN_REPORT:
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-18 22:04:31 +00:00
hci_pend_le_list_add(params, &hdev->pend_le_reports);
break;
default:
break;
}
hci_update_passive_scan(hdev);
}
static void hci_conn_cleanup(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
if (test_and_clear_bit(HCI_CONN_FLUSH_KEY, &conn->flags))
hci_remove_link_key(hdev, &conn->dst);
hci_chan_list_flush(conn);
hci_conn_hash_del(hdev, conn);
if (HCI_CONN_HANDLE_UNSET(conn->handle))
ida_free(&hdev->unset_handle_ida, conn->handle);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
if (conn->cleanup)
conn->cleanup(conn);
if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
switch (conn->setting & SCO_AIRMODE_MASK) {
case SCO_AIRMODE_CVSD:
case SCO_AIRMODE_TRANSP:
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_DISABLE_SCO);
break;
}
} else {
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
}
debugfs_remove_recursive(conn->debugfs);
hci_conn_del_sysfs(conn);
hci_dev_put(hdev);
}
int hci_disconnect(struct hci_conn *conn, __u8 reason)
{
BT_DBG("hcon %p", conn);
/* When we are central of an established connection and it enters
* the disconnect timeout, then go ahead and try to read the
* current clock offset. Processing of the result is done
* within the event handling and hci_clock_offset_evt function.
*/
if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
(conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
struct hci_dev *hdev = conn->hdev;
struct hci_cp_read_clock_offset clkoff_cp;
clkoff_cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
&clkoff_cp);
}
return hci_abort_conn(conn, reason);
}
static void hci_add_sco(struct hci_conn *conn, __u16 handle)
{
struct hci_dev *hdev = conn->hdev;
struct hci_cp_add_sco cp;
BT_DBG("hcon %p", conn);
conn->state = BT_CONNECT;
conn->out = true;
conn->attempt++;
cp.handle = cpu_to_le16(handle);
cp.pkt_type = cpu_to_le16(conn->pkt_type);
hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
}
static bool find_next_esco_param(struct hci_conn *conn,
const struct sco_param *esco_param, int size)
{
if (!conn->parent)
return false;
for (; conn->attempt <= size; conn->attempt++) {
if (lmp_esco_2m_capable(conn->parent) ||
(esco_param[conn->attempt - 1].pkt_type & ESCO_2EV3))
break;
BT_DBG("hcon %p skipped attempt %d, eSCO 2M not supported",
conn, conn->attempt);
}
return conn->attempt <= size;
}
static int configure_datapath_sync(struct hci_dev *hdev, struct bt_codec *codec)
{
int err;
__u8 vnd_len, *vnd_data = NULL;
struct hci_op_configure_data_path *cmd = NULL;
/* Do not take below 2 checks as error since the 1st means user do not
* want to use HFP offload mode and the 2nd means the vendor controller
* do not need to send below HCI command for offload mode.
*/
if (!codec->data_path || !hdev->get_codec_config_data)
return 0;
err = hdev->get_codec_config_data(hdev, ESCO_LINK, codec, &vnd_len,
&vnd_data);
if (err < 0)
goto error;
cmd = kzalloc(sizeof(*cmd) + vnd_len, GFP_KERNEL);
if (!cmd) {
err = -ENOMEM;
goto error;
}
err = hdev->get_data_path_id(hdev, &cmd->data_path_id);
if (err < 0)
goto error;
cmd->vnd_len = vnd_len;
memcpy(cmd->vnd_data, vnd_data, vnd_len);
cmd->direction = 0x00;
__hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
sizeof(*cmd) + vnd_len, cmd, HCI_CMD_TIMEOUT);
cmd->direction = 0x01;
err = __hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
sizeof(*cmd) + vnd_len, cmd,
HCI_CMD_TIMEOUT);
error:
kfree(cmd);
kfree(vnd_data);
return err;
}
static int hci_enhanced_setup_sync(struct hci_dev *hdev, void *data)
{
struct conn_handle_t *conn_handle = data;
struct hci_conn *conn = conn_handle->conn;
__u16 handle = conn_handle->handle;
struct hci_cp_enhanced_setup_sync_conn cp;
const struct sco_param *param;
kfree(conn_handle);
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync This checks if the ACL connection remains valid as it could be destroyed while hci_enhanced_setup_sync is pending on cmd_sync leading to the following trace: BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60 Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37 CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? hci_enhanced_setup_sync+0x91b/0xa60 print_report+0x152/0x4c0 ? hci_enhanced_setup_sync+0x91b/0xa60 ? __virt_addr_valid+0x1fa/0x420 ? hci_enhanced_setup_sync+0x91b/0xa60 kasan_report+0xda/0x1b0 ? hci_enhanced_setup_sync+0x91b/0xa60 hci_enhanced_setup_sync+0x91b/0xa60 ? __pfx_hci_enhanced_setup_sync+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x167/0x240 worker_thread+0x5b7/0xf60 ? __kthread_parkme+0xac/0x1c0 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x293/0x360 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 34: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __hci_conn_add+0x187/0x17d0 hci_connect_sco+0x2e1/0xb90 sco_sock_connect+0x2a2/0xb80 __sys_connect+0x227/0x2a0 __x64_sys_connect+0x6d/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 37: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x101/0x160 kfree+0xd0/0x250 device_release+0x9a/0x210 kobject_put+0x151/0x280 hci_conn_del+0x448/0xbf0 hci_abort_conn_sync+0x46f/0x980 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 worker_thread+0x5b7/0xf60 kthread+0x293/0x360 ret_from_fork+0x2f/0x70 ret_from_fork_asm+0x1a/0x30 Cc: stable@vger.kernel.org Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-02 15:17:26 +00:00
if (!hci_conn_valid(hdev, conn))
return -ECANCELED;
bt_dev_dbg(hdev, "hcon %p", conn);
configure_datapath_sync(hdev, &conn->codec);
conn->state = BT_CONNECT;
conn->out = true;
conn->attempt++;
memset(&cp, 0x00, sizeof(cp));
cp.handle = cpu_to_le16(handle);
cp.tx_bandwidth = cpu_to_le32(0x00001f40);
cp.rx_bandwidth = cpu_to_le32(0x00001f40);
switch (conn->codec.id) {
case BT_CODEC_MSBC:
if (!find_next_esco_param(conn, esco_param_msbc,
ARRAY_SIZE(esco_param_msbc)))
return -EINVAL;
param = &esco_param_msbc[conn->attempt - 1];
cp.tx_coding_format.id = 0x05;
cp.rx_coding_format.id = 0x05;
cp.tx_codec_frame_size = __cpu_to_le16(60);
cp.rx_codec_frame_size = __cpu_to_le16(60);
cp.in_bandwidth = __cpu_to_le32(32000);
cp.out_bandwidth = __cpu_to_le32(32000);
cp.in_coding_format.id = 0x04;
cp.out_coding_format.id = 0x04;
cp.in_coded_data_size = __cpu_to_le16(16);
cp.out_coded_data_size = __cpu_to_le16(16);
cp.in_pcm_data_format = 2;
cp.out_pcm_data_format = 2;
cp.in_pcm_sample_payload_msb_pos = 0;
cp.out_pcm_sample_payload_msb_pos = 0;
cp.in_data_path = conn->codec.data_path;
cp.out_data_path = conn->codec.data_path;
cp.in_transport_unit_size = 1;
cp.out_transport_unit_size = 1;
break;
case BT_CODEC_TRANSPARENT:
if (!find_next_esco_param(conn, esco_param_msbc,
ARRAY_SIZE(esco_param_msbc)))
return false;
param = &esco_param_msbc[conn->attempt - 1];
cp.tx_coding_format.id = 0x03;
cp.rx_coding_format.id = 0x03;
cp.tx_codec_frame_size = __cpu_to_le16(60);
cp.rx_codec_frame_size = __cpu_to_le16(60);
cp.in_bandwidth = __cpu_to_le32(0x1f40);
cp.out_bandwidth = __cpu_to_le32(0x1f40);
cp.in_coding_format.id = 0x03;
cp.out_coding_format.id = 0x03;
cp.in_coded_data_size = __cpu_to_le16(16);
cp.out_coded_data_size = __cpu_to_le16(16);
cp.in_pcm_data_format = 2;
cp.out_pcm_data_format = 2;
cp.in_pcm_sample_payload_msb_pos = 0;
cp.out_pcm_sample_payload_msb_pos = 0;
cp.in_data_path = conn->codec.data_path;
cp.out_data_path = conn->codec.data_path;
cp.in_transport_unit_size = 1;
cp.out_transport_unit_size = 1;
break;
case BT_CODEC_CVSD:
if (conn->parent && lmp_esco_capable(conn->parent)) {
if (!find_next_esco_param(conn, esco_param_cvsd,
ARRAY_SIZE(esco_param_cvsd)))
return -EINVAL;
param = &esco_param_cvsd[conn->attempt - 1];
} else {
if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
return -EINVAL;
param = &sco_param_cvsd[conn->attempt - 1];
}
cp.tx_coding_format.id = 2;
cp.rx_coding_format.id = 2;
cp.tx_codec_frame_size = __cpu_to_le16(60);
cp.rx_codec_frame_size = __cpu_to_le16(60);
cp.in_bandwidth = __cpu_to_le32(16000);
cp.out_bandwidth = __cpu_to_le32(16000);
cp.in_coding_format.id = 4;
cp.out_coding_format.id = 4;
cp.in_coded_data_size = __cpu_to_le16(16);
cp.out_coded_data_size = __cpu_to_le16(16);
cp.in_pcm_data_format = 2;
cp.out_pcm_data_format = 2;
cp.in_pcm_sample_payload_msb_pos = 0;
cp.out_pcm_sample_payload_msb_pos = 0;
cp.in_data_path = conn->codec.data_path;
cp.out_data_path = conn->codec.data_path;
cp.in_transport_unit_size = 16;
cp.out_transport_unit_size = 16;
break;
default:
return -EINVAL;
}
cp.retrans_effort = param->retrans_effort;
cp.pkt_type = __cpu_to_le16(param->pkt_type);
cp.max_latency = __cpu_to_le16(param->max_latency);
if (hci_send_cmd(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
return -EIO;
return 0;
}
static bool hci_setup_sync_conn(struct hci_conn *conn, __u16 handle)
{
struct hci_dev *hdev = conn->hdev;
struct hci_cp_setup_sync_conn cp;
const struct sco_param *param;
bt_dev_dbg(hdev, "hcon %p", conn);
conn->state = BT_CONNECT;
conn->out = true;
conn->attempt++;
cp.handle = cpu_to_le16(handle);
cp.tx_bandwidth = cpu_to_le32(0x00001f40);
cp.rx_bandwidth = cpu_to_le32(0x00001f40);
cp.voice_setting = cpu_to_le16(conn->setting);
switch (conn->setting & SCO_AIRMODE_MASK) {
case SCO_AIRMODE_TRANSP:
if (!find_next_esco_param(conn, esco_param_msbc,
ARRAY_SIZE(esco_param_msbc)))
return false;
param = &esco_param_msbc[conn->attempt - 1];
break;
case SCO_AIRMODE_CVSD:
if (conn->parent && lmp_esco_capable(conn->parent)) {
if (!find_next_esco_param(conn, esco_param_cvsd,
ARRAY_SIZE(esco_param_cvsd)))
return false;
param = &esco_param_cvsd[conn->attempt - 1];
} else {
if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
return false;
param = &sco_param_cvsd[conn->attempt - 1];
}
break;
default:
return false;
}
cp.retrans_effort = param->retrans_effort;
cp.pkt_type = __cpu_to_le16(param->pkt_type);
cp.max_latency = __cpu_to_le16(param->max_latency);
if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
return false;
return true;
}
bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
{
int result;
struct conn_handle_t *conn_handle;
if (enhanced_sync_conn_capable(conn->hdev)) {
conn_handle = kzalloc(sizeof(*conn_handle), GFP_KERNEL);
if (!conn_handle)
return false;
conn_handle->conn = conn;
conn_handle->handle = handle;
result = hci_cmd_sync_queue(conn->hdev, hci_enhanced_setup_sync,
conn_handle, NULL);
if (result < 0)
kfree(conn_handle);
return result == 0;
}
return hci_setup_sync_conn(conn, handle);
}
u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
u16 to_multiplier)
{
struct hci_dev *hdev = conn->hdev;
struct hci_conn_params *params;
struct hci_cp_le_conn_update cp;
hci_dev_lock(hdev);
params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
if (params) {
params->conn_min_interval = min;
params->conn_max_interval = max;
params->conn_latency = latency;
params->supervision_timeout = to_multiplier;
}
hci_dev_unlock(hdev);
memset(&cp, 0, sizeof(cp));
cp.handle = cpu_to_le16(conn->handle);
cp.conn_interval_min = cpu_to_le16(min);
cp.conn_interval_max = cpu_to_le16(max);
cp.conn_latency = cpu_to_le16(latency);
cp.supervision_timeout = cpu_to_le16(to_multiplier);
cp.min_ce_len = cpu_to_le16(0x0000);
cp.max_ce_len = cpu_to_le16(0x0000);
hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
if (params)
return 0x01;
return 0x00;
}
void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
__u8 ltk[16], __u8 key_size)
{
struct hci_dev *hdev = conn->hdev;
struct hci_cp_le_start_enc cp;
BT_DBG("hcon %p", conn);
memset(&cp, 0, sizeof(cp));
cp.handle = cpu_to_le16(conn->handle);
cp.rand = rand;
cp.ediv = ediv;
memcpy(cp.ltk, ltk, key_size);
hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
}
/* Device _must_ be locked */
void hci_sco_setup(struct hci_conn *conn, __u8 status)
{
struct hci_link *link;
link = list_first_entry_or_null(&conn->link_list, struct hci_link, list);
if (!link || !link->conn)
return;
BT_DBG("hcon %p", conn);
if (!status) {
if (lmp_esco_capable(conn->hdev))
hci_setup_sync(link->conn, conn->handle);
else
hci_add_sco(link->conn, conn->handle);
} else {
hci_connect_cfm(link->conn, status);
hci_conn_del(link->conn);
}
}
static void hci_conn_timeout(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn,
disc_work.work);
Bluetooth: Fix for ACL disconnect when pairing fails When pairing fails hci_conn refcnt drops below zero. This cause that ACL link is not disconnected when disconnect timeout fires. Probably this is because l2cap_conn_del calls l2cap_chan_del for each channel, and inside l2cap_chan_del conn is dropped. After that loop hci_chan_del is called which also drops conn. Anyway, as it is desrcibed in hci_core.h, it is known that refcnt drops below 0 sometimes and it should be fine. If so, let disconnect link when hci_conn_timeout fires and refcnt is 0 or below. This patch does it. This affects PTS test SM_TC_JW_BV_05_C Logs from scenario: [69713.706227] [6515] pair_device: [69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22 [69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8 [69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000 [69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25 [69713.706242] [6515] hci_prepare_cmd: skb len 28 [69713.706243] [6515] hci_req_run: length 1 [69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0 [69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9 [69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [69713.706288] [8909] hci_send_frame: hci0 type 1 len 28 [69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28 [69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711664] [8909] hci_rx_work: hci0 [69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6 [69713.711680] [8909] hci_rx_work: hci0 Event packet [69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00 [69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00 [69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818875] [8909] hci_rx_work: hci0 [69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21 [69713.818913] [8909] hci_rx_work: hci0 Event packet [69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00 [69713.818922] [8909] hci_send_to_control: len 19 [69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000 [69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 ... [69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10 [69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0 [69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000 [69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0 [69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00 [69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02 [69713.819039] [8909] smp_chan_create: [69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1 [69713.819043] [8909] smp_send_cmd: code 0x01 [69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15 [69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819057] [8909] l2cap_le_conn_ready: [69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00 [69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1 [69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800 [69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800 [69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004 [69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2 [69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2 [69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01 [69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000 [69713.819086] [8909] le_pairing_complete_cb: status 0 [69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.819093] [8909] hci_sched_acl: hci0 [69713.819094] [8909] hci_sched_sco: hci0 [69713.819096] [8909] hci_sched_esco: hci0 [69713.819098] [8909] hci_sched_le: hci0 [69713.819099] [8909] hci_chan_sent: hci0 [69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10 [69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7 [69713.819106] [8909] hci_send_frame: hci0 type 2 len 15 [69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15 [69713.819119] [8909] hci_chan_sent: hci0 [69713.819121] [8909] hci_prio_recalculate: hci0 [69713.819123] [8909] process_pending_rx: [69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 ... [69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0 [69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000 [69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1 [69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800 [69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 ... [69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800 [69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800 [69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3 [69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0 [69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11 [69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.825213] [8909] hci_sched_acl: hci0 [69713.825214] [8909] hci_sched_sco: hci0 [69713.825216] [8909] hci_sched_esco: hci0 [69713.825217] [8909] hci_sched_le: hci0 [69713.825219] [8909] hci_chan_sent: hci0 [69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9 [69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0 [69713.825225] [8909] hci_send_frame: hci0 type 2 len 11 [69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11 [69713.825242] [8909] hci_chan_sent: hci0 [69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825253] [8909] hci_prio_recalculate: hci0 [69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.866902] [8909] hci_rx_work: hci0 [69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.866928] [8909] hci_rx_work: hci0 Event packet [69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.866940] [8909] hci_sched_acl: hci0 ... [69713.866944] [8909] hci_sched_le: hci0 [69713.866953] [8909] hci_chan_sent: hci0 [69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867840] [28074] hci_rx_work: hci0 [69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.867850] [28074] hci_rx_work: hci0 Event packet [69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.867860] [28074] hci_sched_acl: hci0 [69713.867861] [28074] hci_sched_sco: hci0 [69713.867862] [28074] hci_sched_esco: hci0 [69713.867863] [28074] hci_sched_le: hci0 [69713.867865] [28074] hci_chan_sent: hci0 [69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145661] [8909] hci_rx_work: hci0 [69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10 [69714.145676] [8909] hci_rx_work: hci0 ACL data packet [69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002 [69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0 [69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2 [69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006 [69714.145696] [8909] hci_send_to_control: len 14 [69714.145710] [8909] smp_chan_destroy: [69714.145713] [8909] pairing_complete: status 3 [69714.145714] [8909] cmd_complete: sock ffff88010323ac00 [69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3 [69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00 ... [69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2 [69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13 [69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000 [69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000 [69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3 [69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13 [69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4 [69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1 [69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3 [69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0 [69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00 [69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 [69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED [69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED [69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2 [69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800 [69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1 [69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00 [69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0 [69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1 Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-06-17 11:04:20 +00:00
int refcnt = atomic_read(&conn->refcnt);
BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
Bluetooth: Fix for ACL disconnect when pairing fails When pairing fails hci_conn refcnt drops below zero. This cause that ACL link is not disconnected when disconnect timeout fires. Probably this is because l2cap_conn_del calls l2cap_chan_del for each channel, and inside l2cap_chan_del conn is dropped. After that loop hci_chan_del is called which also drops conn. Anyway, as it is desrcibed in hci_core.h, it is known that refcnt drops below 0 sometimes and it should be fine. If so, let disconnect link when hci_conn_timeout fires and refcnt is 0 or below. This patch does it. This affects PTS test SM_TC_JW_BV_05_C Logs from scenario: [69713.706227] [6515] pair_device: [69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22 [69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8 [69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000 [69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25 [69713.706242] [6515] hci_prepare_cmd: skb len 28 [69713.706243] [6515] hci_req_run: length 1 [69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0 [69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9 [69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [69713.706288] [8909] hci_send_frame: hci0 type 1 len 28 [69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28 [69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711664] [8909] hci_rx_work: hci0 [69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6 [69713.711680] [8909] hci_rx_work: hci0 Event packet [69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00 [69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00 [69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818875] [8909] hci_rx_work: hci0 [69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21 [69713.818913] [8909] hci_rx_work: hci0 Event packet [69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00 [69713.818922] [8909] hci_send_to_control: len 19 [69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000 [69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 ... [69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10 [69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0 [69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000 [69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0 [69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00 [69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02 [69713.819039] [8909] smp_chan_create: [69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1 [69713.819043] [8909] smp_send_cmd: code 0x01 [69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15 [69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819057] [8909] l2cap_le_conn_ready: [69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00 [69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1 [69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800 [69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800 [69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004 [69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2 [69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2 [69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01 [69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000 [69713.819086] [8909] le_pairing_complete_cb: status 0 [69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.819093] [8909] hci_sched_acl: hci0 [69713.819094] [8909] hci_sched_sco: hci0 [69713.819096] [8909] hci_sched_esco: hci0 [69713.819098] [8909] hci_sched_le: hci0 [69713.819099] [8909] hci_chan_sent: hci0 [69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10 [69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7 [69713.819106] [8909] hci_send_frame: hci0 type 2 len 15 [69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15 [69713.819119] [8909] hci_chan_sent: hci0 [69713.819121] [8909] hci_prio_recalculate: hci0 [69713.819123] [8909] process_pending_rx: [69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 ... [69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0 [69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000 [69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1 [69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800 [69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 ... [69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800 [69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800 [69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3 [69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0 [69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11 [69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.825213] [8909] hci_sched_acl: hci0 [69713.825214] [8909] hci_sched_sco: hci0 [69713.825216] [8909] hci_sched_esco: hci0 [69713.825217] [8909] hci_sched_le: hci0 [69713.825219] [8909] hci_chan_sent: hci0 [69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9 [69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0 [69713.825225] [8909] hci_send_frame: hci0 type 2 len 11 [69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11 [69713.825242] [8909] hci_chan_sent: hci0 [69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825253] [8909] hci_prio_recalculate: hci0 [69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.866902] [8909] hci_rx_work: hci0 [69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.866928] [8909] hci_rx_work: hci0 Event packet [69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.866940] [8909] hci_sched_acl: hci0 ... [69713.866944] [8909] hci_sched_le: hci0 [69713.866953] [8909] hci_chan_sent: hci0 [69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867840] [28074] hci_rx_work: hci0 [69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.867850] [28074] hci_rx_work: hci0 Event packet [69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.867860] [28074] hci_sched_acl: hci0 [69713.867861] [28074] hci_sched_sco: hci0 [69713.867862] [28074] hci_sched_esco: hci0 [69713.867863] [28074] hci_sched_le: hci0 [69713.867865] [28074] hci_chan_sent: hci0 [69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145661] [8909] hci_rx_work: hci0 [69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10 [69714.145676] [8909] hci_rx_work: hci0 ACL data packet [69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002 [69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0 [69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2 [69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006 [69714.145696] [8909] hci_send_to_control: len 14 [69714.145710] [8909] smp_chan_destroy: [69714.145713] [8909] pairing_complete: status 3 [69714.145714] [8909] cmd_complete: sock ffff88010323ac00 [69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3 [69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00 ... [69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2 [69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13 [69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000 [69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000 [69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3 [69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13 [69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4 [69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1 [69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3 [69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0 [69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00 [69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 [69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED [69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED [69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2 [69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800 [69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1 [69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00 [69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0 [69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1 Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-06-17 11:04:20 +00:00
WARN_ON(refcnt < 0);
/* FIXME: It was observed that in pairing failed scenario, refcnt
* drops below 0. Probably this is because l2cap_conn_del calls
* l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
* dropped. After that loop hci_chan_del is called which also drops
* conn. For now make sure that ACL is alive if refcnt is higher then 0,
* otherwise drop it.
*/
if (refcnt > 0)
return;
hci_abort_conn(conn, hci_proto_disconn_ind(conn));
}
/* Enter sniff mode */
static void hci_conn_idle(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn,
idle_work.work);
struct hci_dev *hdev = conn->hdev;
BT_DBG("hcon %p mode %d", conn, conn->mode);
if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
return;
if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
return;
if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
struct hci_cp_sniff_subrate cp;
cp.handle = cpu_to_le16(conn->handle);
cp.max_latency = cpu_to_le16(0);
cp.min_remote_timeout = cpu_to_le16(0);
cp.min_local_timeout = cpu_to_le16(0);
hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
}
if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
struct hci_cp_sniff_mode cp;
cp.handle = cpu_to_le16(conn->handle);
cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
cp.attempt = cpu_to_le16(4);
cp.timeout = cpu_to_le16(1);
hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
}
}
static void hci_conn_auto_accept(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn,
auto_accept_work.work);
hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
&conn->dst);
}
static void le_disable_advertising(struct hci_dev *hdev)
{
if (ext_adv_capable(hdev)) {
struct hci_cp_le_set_ext_adv_enable cp;
cp.enable = 0x00;
cp.num_of_sets = 0x00;
hci_send_cmd(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, sizeof(cp),
&cp);
} else {
u8 enable = 0x00;
hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
&enable);
}
}
static void le_conn_timeout(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn,
le_conn_timeout.work);
struct hci_dev *hdev = conn->hdev;
BT_DBG("");
/* We could end up here due to having done directed advertising,
* so clean up the state if necessary. This should however only
* happen with broken hardware or if low duty cycle was used
* (which doesn't have a timeout of its own).
*/
if (conn->role == HCI_ROLE_SLAVE) {
/* Disable LE Advertising */
le_disable_advertising(hdev);
hci_dev_lock(hdev);
hci_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
hci_dev_unlock(hdev);
return;
}
hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
struct iso_list_data {
union {
u8 cig;
u8 big;
};
union {
u8 cis;
u8 bis;
u16 sync_handle;
};
int count;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
bool big_term;
bool pa_sync_term;
bool big_sync_term;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
};
static void bis_list(struct hci_conn *conn, void *data)
{
struct iso_list_data *d = data;
/* Skip if not broadcast/ANY address */
if (bacmp(&conn->dst, BDADDR_ANY))
return;
if (d->big != conn->iso_qos.bcast.big || d->bis == BT_ISO_QOS_BIS_UNSET ||
d->bis != conn->iso_qos.bcast.bis)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return;
d->count++;
}
static int terminate_big_sync(struct hci_dev *hdev, void *data)
{
struct iso_list_data *d = data;
bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", d->big, d->bis);
hci_disable_per_advertising_sync(hdev, d->bis);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
hci_remove_ext_adv_instance_sync(hdev, d->bis, NULL);
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
/* Only terminate BIG if it has been created */
if (!d->big_term)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return 0;
return hci_le_terminate_big_sync(hdev, d->big,
HCI_ERROR_LOCAL_HOST_TERM);
}
static void terminate_big_destroy(struct hci_dev *hdev, void *data, int err)
{
kfree(data);
}
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
static int hci_le_terminate_big(struct hci_dev *hdev, struct hci_conn *conn)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
{
struct iso_list_data *d;
int ret;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", conn->iso_qos.bcast.big,
conn->iso_qos.bcast.bis);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
d = kzalloc(sizeof(*d), GFP_KERNEL);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
if (!d)
return -ENOMEM;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
d->big = conn->iso_qos.bcast.big;
d->bis = conn->iso_qos.bcast.bis;
d->big_term = test_and_clear_bit(HCI_CONN_BIG_CREATED, &conn->flags);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
ret = hci_cmd_sync_queue(hdev, terminate_big_sync, d,
terminate_big_destroy);
if (ret)
kfree(d);
return ret;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static int big_terminate_sync(struct hci_dev *hdev, void *data)
{
struct iso_list_data *d = data;
bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", d->big,
d->sync_handle);
if (d->big_sync_term)
hci_le_big_terminate_sync(hdev, d->big);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
if (d->pa_sync_term)
return hci_le_pa_terminate_sync(hdev, d->sync_handle);
return 0;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static void find_bis(struct hci_conn *conn, void *data)
{
struct iso_list_data *d = data;
/* Ignore if BIG doesn't match */
if (d->big != conn->iso_qos.bcast.big)
return;
d->count++;
}
static int hci_le_big_terminate(struct hci_dev *hdev, u8 big, struct hci_conn *conn)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
{
struct iso_list_data *d;
int ret;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", big, conn->sync_handle);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
d = kzalloc(sizeof(*d), GFP_KERNEL);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
if (!d)
return -ENOMEM;
d->big = big;
d->sync_handle = conn->sync_handle;
if (test_and_clear_bit(HCI_CONN_PA_SYNC, &conn->flags)) {
hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
HCI_CONN_PA_SYNC, d);
if (!d->count)
d->pa_sync_term = true;
d->count = 0;
}
if (test_and_clear_bit(HCI_CONN_BIG_SYNC, &conn->flags)) {
hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
HCI_CONN_BIG_SYNC, d);
if (!d->count)
d->big_sync_term = true;
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
ret = hci_cmd_sync_queue(hdev, big_terminate_sync, d,
terminate_big_destroy);
if (ret)
kfree(d);
return ret;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
/* Cleanup BIS connection
*
* Detects if there any BIS left connected in a BIG
* broadcaster: Remove advertising instance and terminate BIG.
* broadcaster receiver: Teminate BIG sync and terminate PA sync.
*/
static void bis_cleanup(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
struct hci_conn *bis;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
bt_dev_dbg(hdev, "conn %p", conn);
if (conn->role == HCI_ROLE_MASTER) {
if (!test_and_clear_bit(HCI_CONN_PER_ADV, &conn->flags))
return;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
/* Check if ISO connection is a BIS and terminate advertising
* set and BIG if there are no other connections using it.
*/
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
bis = hci_conn_hash_lookup_big(hdev, conn->iso_qos.bcast.big);
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
if (bis)
return;
hci_le_terminate_big(hdev, conn);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
} else {
hci_le_big_terminate(hdev, conn->iso_qos.bcast.big,
conn);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
}
static int remove_cig_sync(struct hci_dev *hdev, void *data)
{
u8 handle = PTR_UINT(data);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return hci_le_remove_cig_sync(hdev, handle);
}
static int hci_le_remove_cig(struct hci_dev *hdev, u8 handle)
{
bt_dev_dbg(hdev, "handle 0x%2.2x", handle);
return hci_cmd_sync_queue(hdev, remove_cig_sync, UINT_PTR(handle),
NULL);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static void find_cis(struct hci_conn *conn, void *data)
{
struct iso_list_data *d = data;
/* Ignore broadcast or if CIG don't match */
if (!bacmp(&conn->dst, BDADDR_ANY) || d->cig != conn->iso_qos.ucast.cig)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return;
d->count++;
}
/* Cleanup CIS connection:
*
* Detects if there any CIS left connected in a CIG and remove it.
*/
static void cis_cleanup(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
struct iso_list_data d;
if (conn->iso_qos.ucast.cig == BT_ISO_QOS_CIG_UNSET)
return;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
memset(&d, 0, sizeof(d));
d.cig = conn->iso_qos.ucast.cig;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Check if ISO connection is a CIS and remove CIG if there are
* no other connections using it.
*/
hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_BOUND, &d);
hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECT, &d);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECTED, &d);
if (d.count)
return;
hci_le_remove_cig(hdev, conn->iso_qos.ucast.cig);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static int hci_conn_hash_alloc_unset(struct hci_dev *hdev)
{
return ida_alloc_range(&hdev->unset_handle_ida, HCI_CONN_HANDLE_MAX + 1,
U16_MAX, GFP_ATOMIC);
}
static struct hci_conn *__hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
u8 role, u16 handle)
{
struct hci_conn *conn;
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
switch (type) {
case ACL_LINK:
if (!hdev->acl_mtu)
return ERR_PTR(-ECONNREFUSED);
break;
case ISO_LINK:
if (hdev->iso_mtu)
/* Dedicated ISO Buffer exists */
break;
fallthrough;
case LE_LINK:
if (hdev->le_mtu && hdev->le_mtu < HCI_MIN_LE_MTU)
return ERR_PTR(-ECONNREFUSED);
if (!hdev->le_mtu && hdev->acl_mtu < HCI_MIN_LE_MTU)
return ERR_PTR(-ECONNREFUSED);
break;
case SCO_LINK:
case ESCO_LINK:
if (!hdev->sco_pkts)
/* Controller does not support SCO or eSCO over HCI */
return ERR_PTR(-ECONNREFUSED);
break;
default:
return ERR_PTR(-ECONNREFUSED);
}
bt_dev_dbg(hdev, "dst %pMR handle 0x%4.4x", dst, handle);
conn = kzalloc(sizeof(*conn), GFP_KERNEL);
if (!conn)
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
return ERR_PTR(-ENOMEM);
bacpy(&conn->dst, dst);
bacpy(&conn->src, &hdev->bdaddr);
conn->handle = handle;
conn->hdev = hdev;
conn->type = type;
conn->role = role;
conn->mode = HCI_CM_ACTIVE;
conn->state = BT_OPEN;
conn->auth_type = HCI_AT_GENERAL_BONDING;
conn->io_capability = hdev->io_capability;
conn->remote_auth = 0xff;
conn->key_type = 0xff;
conn->rssi = HCI_RSSI_INVALID;
conn->tx_power = HCI_TX_POWER_INVALID;
conn->max_tx_power = HCI_TX_POWER_INVALID;
conn->sync_handle = HCI_SYNC_HANDLE_INVALID;
conn->sid = HCI_SID_INVALID;
set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-26 18:01:22 +00:00
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
/* Set Default Authenticated payload timeout to 30s */
conn->auth_payload_timeout = DEFAULT_AUTH_PAYLOAD_TIMEOUT;
if (conn->role == HCI_ROLE_MASTER)
conn->out = true;
switch (type) {
case ACL_LINK:
conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
conn->mtu = hdev->acl_mtu;
break;
case LE_LINK:
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* conn->src should reflect the local identity address */
hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
conn->mtu = hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
break;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
case ISO_LINK:
/* conn->src should reflect the local identity address */
hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* set proper cleanup function */
if (!bacmp(dst, BDADDR_ANY))
conn->cleanup = bis_cleanup;
else if (conn->role == HCI_ROLE_MASTER)
conn->cleanup = cis_cleanup;
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
conn->mtu = hdev->iso_mtu ? hdev->iso_mtu :
hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu;
break;
case SCO_LINK:
if (lmp_esco_capable(hdev))
conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
(hdev->esco_type & EDR_ESCO_MASK);
else
conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
conn->mtu = hdev->sco_mtu;
break;
case ESCO_LINK:
conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
conn->mtu = hdev->sco_mtu;
break;
}
skb_queue_head_init(&conn->data_q);
INIT_LIST_HEAD(&conn->chan_list);
INIT_LIST_HEAD(&conn->link_list);
INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
atomic_set(&conn->refcnt, 0);
hci_dev_hold(hdev);
hci_conn_hash_add(hdev, conn);
/* The SCO and eSCO connections will only be notified when their
* setup has been completed. This is different to ACL links which
* can be notified right away.
*/
if (conn->type != SCO_LINK && conn->type != ESCO_LINK) {
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
}
Bluetooth: Fix issue with sysfs handling for connections Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Roger Quadros <ext-roger.quadros@nokia.com> Tested-by: Marc Pignat <marc.pignat@hevs.ch>
2009-05-03 01:24:06 +00:00
hci_conn_init_sysfs(conn);
return conn;
}
struct hci_conn *hci_conn_add_unset(struct hci_dev *hdev, int type,
bdaddr_t *dst, u8 role)
{
int handle;
bt_dev_dbg(hdev, "dst %pMR", dst);
handle = hci_conn_hash_alloc_unset(hdev);
if (unlikely(handle < 0))
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
return ERR_PTR(-ECONNREFUSED);
return __hci_conn_add(hdev, type, dst, role, handle);
}
struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
u8 role, u16 handle)
{
if (handle > HCI_CONN_HANDLE_MAX)
return ERR_PTR(-EINVAL);
return __hci_conn_add(hdev, type, dst, role, handle);
}
static void hci_conn_cleanup_child(struct hci_conn *conn, u8 reason)
{
if (!reason)
reason = HCI_ERROR_REMOTE_USER_TERM;
/* Due to race, SCO/ISO conn might be not established yet at this point,
* and nothing else will clean it up. In other cases it is done via HCI
* events.
*/
switch (conn->type) {
case SCO_LINK:
case ESCO_LINK:
if (HCI_CONN_HANDLE_UNSET(conn->handle))
hci_conn_failed(conn, reason);
break;
case ISO_LINK:
if ((conn->state != BT_CONNECTED &&
!test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) ||
test_bit(HCI_CONN_BIG_CREATED, &conn->flags))
hci_conn_failed(conn, reason);
break;
}
}
static void hci_conn_unlink(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
bt_dev_dbg(hdev, "hcon %p", conn);
if (!conn->parent) {
struct hci_link *link, *t;
list_for_each_entry_safe(link, t, &conn->link_list, list) {
struct hci_conn *child = link->conn;
hci_conn_unlink(child);
/* If hdev is down it means
* hci_dev_close_sync/hci_conn_hash_flush is in progress
* and links don't need to be cleanup as all connections
* would be cleanup.
*/
if (!test_bit(HCI_UP, &hdev->flags))
continue;
hci_conn_cleanup_child(child, conn->abort_reason);
}
return;
}
if (!conn->link)
return;
list_del_rcu(&conn->link->list);
synchronize_rcu();
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and CIS connections, i.e., everything except LE connections. However, if (e)SCO connections are unlinked when BR/EDR disconnects, CIS connections should also be unlinked when LE disconnects. In terms of disconnection behavior, CIS and (e)SCO connections are not too different. One peculiarity of CIS is that when CIS connections are disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command: All SCO, eSCO, and CIS connections on a physical link should be disconnected before the ACL connection on the same physical connection is disconnected. If it does not, they will be implicitly disconnected as part of the ACL disconnection. ... Note: As specified in Section 7.7.5, on the Central, the handle for a CIS remains valid even after disconnection and, therefore, the Host can recreate a disconnected CIS at a later point in time using the same connection handle. Since hci_conn_link invokes both hci_conn_get and hci_conn_hold, hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as well. However, currently it performs only hci_conn_put. This patch makes hci_conn_unlink call hci_conn_drop as well, which simplifies the logic in hci_conn_del a bit and may benefit future users of hci_conn_unlink. But it is noted that this change additionally implies that hci_conn_unlink can queue disc_work on conn itself, with the following call stack: hci_conn_unlink(conn) [conn->parent == NULL] -> hci_conn_unlink(child) [child->parent == conn] -> hci_conn_drop(child->parent) -> queue_delayed_work(&conn->disc_work) Queued disc_work after hci_conn_del can be spurious, so during the process of hci_conn_del, it is necessary to make the call to cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink. Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-03 13:39:37 +00:00
hci_conn_drop(conn->parent);
hci_conn_put(conn->parent);
conn->parent = NULL;
kfree(conn->link);
conn->link = NULL;
}
void hci_conn_del(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and CIS connections, i.e., everything except LE connections. However, if (e)SCO connections are unlinked when BR/EDR disconnects, CIS connections should also be unlinked when LE disconnects. In terms of disconnection behavior, CIS and (e)SCO connections are not too different. One peculiarity of CIS is that when CIS connections are disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command: All SCO, eSCO, and CIS connections on a physical link should be disconnected before the ACL connection on the same physical connection is disconnected. If it does not, they will be implicitly disconnected as part of the ACL disconnection. ... Note: As specified in Section 7.7.5, on the Central, the handle for a CIS remains valid even after disconnection and, therefore, the Host can recreate a disconnected CIS at a later point in time using the same connection handle. Since hci_conn_link invokes both hci_conn_get and hci_conn_hold, hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as well. However, currently it performs only hci_conn_put. This patch makes hci_conn_unlink call hci_conn_drop as well, which simplifies the logic in hci_conn_del a bit and may benefit future users of hci_conn_unlink. But it is noted that this change additionally implies that hci_conn_unlink can queue disc_work on conn itself, with the following call stack: hci_conn_unlink(conn) [conn->parent == NULL] -> hci_conn_unlink(child) [child->parent == conn] -> hci_conn_drop(child->parent) -> queue_delayed_work(&conn->disc_work) Queued disc_work after hci_conn_del can be spurious, so during the process of hci_conn_del, it is necessary to make the call to cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink. Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-03 13:39:37 +00:00
hci_conn_unlink(conn);
disable_delayed_work_sync(&conn->disc_work);
disable_delayed_work_sync(&conn->auto_accept_work);
disable_delayed_work_sync(&conn->idle_work);
if (conn->type == ACL_LINK) {
/* Unacked frames */
hdev->acl_cnt += conn->sent;
} else if (conn->type == LE_LINK) {
cancel_delayed_work(&conn->le_conn_timeout);
if (hdev->le_pkts)
hdev->le_cnt += conn->sent;
else
hdev->acl_cnt += conn->sent;
} else {
/* Unacked ISO frames */
if (conn->type == ISO_LINK) {
if (hdev->iso_pkts)
hdev->iso_cnt += conn->sent;
else if (hdev->le_pkts)
hdev->le_cnt += conn->sent;
else
hdev->acl_cnt += conn->sent;
}
}
skb_queue_purge(&conn->data_q);
/* Remove the connection from the list and cleanup its remaining
* state. This is a separate function since for some cases like
* BT_CONNECT_SCAN we *only* want the cleanup part without the
* rest of hci_conn_del.
*/
hci_conn_cleanup(conn);
/* Dequeue callbacks using connection pointer as data */
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
}
struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
{
int use_src = bacmp(src, BDADDR_ANY);
struct hci_dev *hdev = NULL, *d;
BT_DBG("%pMR -> %pMR", src, dst);
read_lock(&hci_dev_list_lock);
list_for_each_entry(d, &hci_dev_list, list) {
if (!test_bit(HCI_UP, &d->flags) ||
hci_dev_test_flag(d, HCI_USER_CHANNEL))
continue;
/* Simple routing:
* No source address - find interface with bdaddr != dst
* Source address - find interface with bdaddr == src
*/
if (use_src) {
bdaddr_t id_addr;
u8 id_addr_type;
if (src_type == BDADDR_BREDR) {
if (!lmp_bredr_capable(d))
continue;
bacpy(&id_addr, &d->bdaddr);
id_addr_type = BDADDR_BREDR;
} else {
if (!lmp_le_capable(d))
continue;
hci_copy_identity_address(d, &id_addr,
&id_addr_type);
/* Convert from HCI to three-value type */
if (id_addr_type == ADDR_LE_DEV_PUBLIC)
id_addr_type = BDADDR_LE_PUBLIC;
else
id_addr_type = BDADDR_LE_RANDOM;
}
if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
hdev = d; break;
}
} else {
if (bacmp(&d->bdaddr, dst)) {
hdev = d; break;
}
}
}
if (hdev)
hdev = hci_dev_hold(hdev);
read_unlock(&hci_dev_list_lock);
return hdev;
}
EXPORT_SYMBOL(hci_get_route);
/* This function requires the caller holds hdev->lock */
static void hci_le_conn_failed(struct hci_conn *conn, u8 status)
{
struct hci_dev *hdev = conn->hdev;
hci_connect_le_scan_cleanup(conn, status);
Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 23:58:45 +00:00
/* Enable advertising in case this was a failed connection
* attempt as a peripheral.
*/
Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-27 23:58:45 +00:00
hci_enable_advertising(hdev);
}
/* This function requires the caller holds hdev->lock */
void hci_conn_failed(struct hci_conn *conn, u8 status)
{
struct hci_dev *hdev = conn->hdev;
bt_dev_dbg(hdev, "status 0x%2.2x", status);
switch (conn->type) {
case LE_LINK:
hci_le_conn_failed(conn, status);
break;
case ACL_LINK:
mgmt_connect_failed(hdev, conn, status);
break;
}
/* In case of BIG/PA sync failed, clear conn flags so that
* the conns will be correctly cleaned up by ISO layer
*/
test_and_clear_bit(HCI_CONN_BIG_SYNC_FAILED, &conn->flags);
test_and_clear_bit(HCI_CONN_PA_SYNC_FAILED, &conn->flags);
conn->state = BT_CLOSED;
hci_connect_cfm(conn, status);
hci_conn_del(conn);
}
/* This function requires the caller holds hdev->lock */
u8 hci_conn_set_handle(struct hci_conn *conn, u16 handle)
{
struct hci_dev *hdev = conn->hdev;
bt_dev_dbg(hdev, "hcon %p handle 0x%4.4x", conn, handle);
if (conn->handle == handle)
return 0;
if (handle > HCI_CONN_HANDLE_MAX) {
bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
handle, HCI_CONN_HANDLE_MAX);
return HCI_ERROR_INVALID_PARAMETERS;
}
/* If abort_reason has been sent it means the connection is being
* aborted and the handle shall not be changed.
*/
if (conn->abort_reason)
return conn->abort_reason;
if (HCI_CONN_HANDLE_UNSET(conn->handle))
ida_free(&hdev->unset_handle_ida, conn->handle);
conn->handle = handle;
return 0;
}
struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, bool dst_resolved, u8 sec_level,
u16 conn_timeout, u8 role, u8 phy, u8 sec_phy)
{
struct hci_conn *conn;
struct smp_irk *irk;
int err;
/* Let's make sure that le is enabled.*/
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
if (lmp_le_capable(hdev))
return ERR_PTR(-ECONNREFUSED);
return ERR_PTR(-EOPNOTSUPP);
}
/* Since the controller supports only one LE connection attempt at a
* time, we return -EBUSY if there is any connection attempt running.
*/
if (hci_lookup_le_connect(hdev))
return ERR_PTR(-EBUSY);
/* If there's already a connection object but it's not in
* scanning state it means it must already be established, in
* which case we can't do anything else except report a failure
* to connect.
*/
conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
return ERR_PTR(-EBUSY);
}
/* Check if the destination address has been resolved by the controller
* since if it did then the identity address shall be used.
*/
if (!dst_resolved) {
/* When given an identity address with existing identity
* resolving key, the connection needs to be established
* to a resolvable random address.
*
* Storing the resolvable random address is required here
* to handle connection failures. The address will later
* be resolved back into the original identity address
* from the connect request.
*/
irk = hci_find_irk_by_addr(hdev, dst, dst_type);
if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
dst = &irk->rpa;
dst_type = ADDR_LE_DEV_RANDOM;
}
}
if (conn) {
bacpy(&conn->dst, dst);
} else {
conn = hci_conn_add_unset(hdev, LE_LINK, dst, role);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(conn))
return conn;
hci_conn_hold(conn);
conn->pending_sec_level = sec_level;
}
conn->dst_type = dst_type;
conn->sec_level = BT_SECURITY_LOW;
conn->conn_timeout = conn_timeout;
conn->le_adv_phy = phy;
conn->le_adv_sec_phy = sec_phy;
err = hci_connect_le_sync(hdev, conn);
if (err) {
hci_conn_del(conn);
return ERR_PTR(err);
}
return conn;
}
static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
{
struct hci_conn *conn;
conn = hci_conn_hash_lookup_le(hdev, addr, type);
if (!conn)
return false;
if (conn->state != BT_CONNECTED)
return false;
return true;
}
/* This function requires the caller holds hdev->lock */
static int hci_explicit_conn_params_set(struct hci_dev *hdev,
bdaddr_t *addr, u8 addr_type)
{
struct hci_conn_params *params;
if (is_connected(hdev, addr, addr_type))
return -EISCONN;
params = hci_conn_params_lookup(hdev, addr, addr_type);
if (!params) {
params = hci_conn_params_add(hdev, addr, addr_type);
if (!params)
return -ENOMEM;
/* If we created new params, mark them to be deleted in
* hci_connect_le_scan_cleanup. It's different case than
* existing disabled params, those will stay after cleanup.
*/
params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
}
/* We're trying to connect, so make sure params are at pend_le_conns */
if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
params->auto_connect == HCI_AUTO_CONN_REPORT ||
params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:314) ================================================================== Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-18 22:04:31 +00:00
hci_pend_le_list_del_init(params);
hci_pend_le_list_add(params, &hdev->pend_le_conns);
}
params->explicit_connect = true;
BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
params->auto_connect);
return 0;
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
static int qos_set_big(struct hci_dev *hdev, struct bt_iso_qos *qos)
{
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
struct hci_conn *conn;
u8 big;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Allocate a BIG if not set */
if (qos->bcast.big == BT_ISO_QOS_BIG_UNSET) {
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
for (big = 0x00; big < 0xef; big++) {
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
conn = hci_conn_hash_lookup_big(hdev, big);
if (!conn)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
break;
}
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
if (big == 0xef)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return -EADDRNOTAVAIL;
/* Update BIG */
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
qos->bcast.big = big;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
return 0;
}
static int qos_set_bis(struct hci_dev *hdev, struct bt_iso_qos *qos)
{
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
struct hci_conn *conn;
u8 bis;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Allocate BIS if not set */
if (qos->bcast.bis == BT_ISO_QOS_BIS_UNSET) {
if (qos->bcast.big != BT_ISO_QOS_BIG_UNSET) {
conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
if (conn) {
/* If the BIG handle is already matched to an advertising
* handle, do not allocate a new one.
*/
qos->bcast.bis = conn->iso_qos.bcast.bis;
return 0;
}
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Find an unused adv set to advertise BIS, skip instance 0x00
* since it is reserved as general purpose set.
*/
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
for (bis = 0x01; bis < hdev->le_num_of_adv_sets;
bis++) {
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
conn = hci_conn_hash_lookup_bis(hdev, BDADDR_ANY, bis);
if (!conn)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
break;
}
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
if (bis == hdev->le_num_of_adv_sets)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return -EADDRNOTAVAIL;
/* Update BIS */
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
qos->bcast.bis = bis;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
return 0;
}
/* This function requires the caller holds hdev->lock */
static struct hci_conn *hci_add_bis(struct hci_dev *hdev, bdaddr_t *dst,
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
struct bt_iso_qos *qos, __u8 base_len,
__u8 *base)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
{
struct hci_conn *conn;
int err;
/* Let's make sure that le is enabled.*/
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
if (lmp_le_capable(hdev))
return ERR_PTR(-ECONNREFUSED);
return ERR_PTR(-EOPNOTSUPP);
}
err = qos_set_big(hdev, qos);
if (err)
return ERR_PTR(err);
err = qos_set_bis(hdev, qos);
if (err)
return ERR_PTR(err);
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
/* Check if the LE Create BIG command has already been sent */
conn = hci_conn_hash_lookup_per_adv_bis(hdev, dst, qos->bcast.big,
qos->bcast.big);
if (conn)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return ERR_PTR(-EADDRINUSE);
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
/* Check BIS settings against other bound BISes, since all
* BISes in a BIG must have the same value for all parameters
*/
Bluetooth: ISO: Support multiple BIGs This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-19 14:53:16 +00:00
conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
if (conn && (memcmp(qos, &conn->iso_qos, sizeof(*qos)) ||
base_len != conn->le_per_adv_data_len ||
memcmp(conn->le_per_adv_data, base, base_len)))
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return ERR_PTR(-EADDRINUSE);
conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(conn))
return conn;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
conn->state = BT_CONNECT;
hci_conn_hold(conn);
return conn;
}
/* This function requires the caller holds hdev->lock */
struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, u8 sec_level,
u16 conn_timeout,
enum conn_reasons conn_reason)
{
struct hci_conn *conn;
/* Let's make sure that le is enabled.*/
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
if (lmp_le_capable(hdev))
return ERR_PTR(-ECONNREFUSED);
return ERR_PTR(-EOPNOTSUPP);
}
/* Some devices send ATT messages as soon as the physical link is
* established. To be able to handle these ATT messages, the user-
* space first establishes the connection and then starts the pairing
* process.
*
* So if a hci_conn object already exists for the following connection
* attempt, we simply update pending_sec_level and auth_type fields
* and return the object found.
*/
conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
if (conn) {
if (conn->pending_sec_level < sec_level)
conn->pending_sec_level = sec_level;
goto done;
}
BT_DBG("requesting refresh of dst_addr");
conn = hci_conn_add_unset(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(conn))
return conn;
if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0) {
hci_conn_del(conn);
return ERR_PTR(-EBUSY);
}
conn->state = BT_CONNECT;
set_bit(HCI_CONN_SCANNING, &conn->flags);
conn->dst_type = dst_type;
conn->sec_level = BT_SECURITY_LOW;
conn->pending_sec_level = sec_level;
conn->conn_timeout = conn_timeout;
conn->conn_reason = conn_reason;
hci_update_passive_scan(hdev);
done:
hci_conn_hold(conn);
return conn;
}
struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
u8 sec_level, u8 auth_type,
enum conn_reasons conn_reason, u16 timeout)
{
struct hci_conn *acl;
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
if (lmp_bredr_capable(hdev))
return ERR_PTR(-ECONNREFUSED);
return ERR_PTR(-EOPNOTSUPP);
}
Bluetooth: Reject connection with the device which has same BD_ADDR This change is used to relieve CVE-2020-26555. The description of the CVE: Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification 1.0B through 5.2 may permit an unauthenticated nearby device to spoof the BD_ADDR of the peer device to complete pairing without knowledge of the PIN. [1] The detail of this attack is in IEEE paper: BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols [2] It's a reflection attack. The paper mentioned that attacker can induce the attacked target to generate null link key (zero key) without PIN code. In BR/EDR, the key generation is actually handled in the controller which is below HCI. A condition of this attack is that attacker should change the BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with the target device being attacked (Host A). Thus, we reject the connection with device which has same BD_ADDR both on HCI_Create_Connection and HCI_Connection_Request to prevent the attack. A similar implementation also shows in btstack project. [3][4] Cc: stable@vger.kernel.org Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1] Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2] Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523 [3] Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297 [4] Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-01 08:59:58 +00:00
/* Reject outgoing connection to device with same BD ADDR against
* CVE-2020-26555
*/
if (!bacmp(&hdev->bdaddr, dst)) {
bt_dev_dbg(hdev, "Reject connection with same BD_ADDR %pMR\n",
dst);
return ERR_PTR(-ECONNREFUSED);
}
acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
if (!acl) {
acl = hci_conn_add_unset(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(acl))
return acl;
}
hci_conn_hold(acl);
acl->conn_reason = conn_reason;
[Bluetooth] Enforce correct authentication requirements With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 05:19:20 +00:00
if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
Bluetooth: hci_conn: Only do ACL connections sequentially Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-02-06 11:08:13 +00:00
int err;
acl->sec_level = BT_SECURITY_LOW;
acl->pending_sec_level = sec_level;
[Bluetooth] Enforce correct authentication requirements With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 05:19:20 +00:00
acl->auth_type = auth_type;
acl->conn_timeout = timeout;
Bluetooth: hci_conn: Only do ACL connections sequentially Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-02-06 11:08:13 +00:00
err = hci_connect_acl_sync(hdev, acl);
Bluetooth: hci_conn: Only do ACL connections sequentially Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-02-06 11:08:13 +00:00
if (err) {
hci_conn_del(acl);
return ERR_PTR(err);
}
[Bluetooth] Enforce correct authentication requirements With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 05:19:20 +00:00
}
return acl;
}
static struct hci_link *hci_conn_link(struct hci_conn *parent,
struct hci_conn *conn)
{
struct hci_dev *hdev = parent->hdev;
struct hci_link *link;
bt_dev_dbg(hdev, "parent %p hcon %p", parent, conn);
if (conn->link)
return conn->link;
if (conn->parent)
return NULL;
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
return NULL;
link->conn = hci_conn_hold(conn);
conn->link = link;
conn->parent = hci_conn_get(parent);
/* Use list_add_tail_rcu append to the list */
list_add_tail_rcu(&link->list, &parent->link_list);
return link;
}
struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
__u16 setting, struct bt_codec *codec,
u16 timeout)
{
struct hci_conn *acl;
struct hci_conn *sco;
struct hci_link *link;
acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING,
CONN_REASON_SCO_CONNECT, timeout);
if (IS_ERR(acl))
return acl;
sco = hci_conn_hash_lookup_ba(hdev, type, dst);
if (!sco) {
sco = hci_conn_add_unset(hdev, type, dst, HCI_ROLE_MASTER);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(sco)) {
hci_conn_drop(acl);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
return sco;
}
}
link = hci_conn_link(acl, sco);
if (!link) {
hci_conn_drop(acl);
hci_conn_drop(sco);
return ERR_PTR(-ENOLINK);
}
sco->setting = setting;
sco->codec = *codec;
if (acl->state == BT_CONNECTED &&
(sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
/* defer SCO setup until mode change completed */
set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
return sco;
}
hci_sco_setup(acl, 0x00);
}
return sco;
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
static int hci_le_create_big(struct hci_conn *conn, struct bt_iso_qos *qos)
{
struct hci_dev *hdev = conn->hdev;
struct hci_cp_le_create_big cp;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
struct iso_list_data data;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
memset(&cp, 0, sizeof(cp));
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
data.big = qos->bcast.big;
data.bis = qos->bcast.bis;
data.count = 0;
/* Create a BIS for each bound connection */
hci_conn_hash_list_state(hdev, bis_list, ISO_LINK,
BT_BOUND, &data);
cp.handle = qos->bcast.big;
cp.adv_handle = qos->bcast.bis;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
cp.num_bis = data.count;
hci_cpu_to_le24(qos->bcast.out.interval, cp.bis.sdu_interval);
cp.bis.sdu = cpu_to_le16(qos->bcast.out.sdu);
cp.bis.latency = cpu_to_le16(qos->bcast.out.latency);
cp.bis.rtn = qos->bcast.out.rtn;
cp.bis.phy = qos->bcast.out.phy;
cp.bis.packing = qos->bcast.packing;
cp.bis.framing = qos->bcast.framing;
cp.bis.encryption = qos->bcast.encryption;
memcpy(cp.bis.bcode, qos->bcast.bcode, sizeof(cp.bis.bcode));
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return hci_send_cmd(hdev, HCI_OP_LE_CREATE_BIG, sizeof(cp), &cp);
}
static int set_cig_params_sync(struct hci_dev *hdev, void *data)
{
DEFINE_FLEX(struct hci_cp_le_set_cig_params, pdu, cis, num_cis, 0x1f);
u8 cig_id = PTR_UINT(data);
struct hci_conn *conn;
struct bt_iso_qos *qos;
u8 aux_num_cis = 0;
u8 cis_id;
conn = hci_conn_hash_lookup_cig(hdev, cig_id);
if (!conn)
return 0;
qos = &conn->iso_qos;
pdu->cig_id = cig_id;
hci_cpu_to_le24(qos->ucast.out.interval, pdu->c_interval);
hci_cpu_to_le24(qos->ucast.in.interval, pdu->p_interval);
pdu->sca = qos->ucast.sca;
pdu->packing = qos->ucast.packing;
pdu->framing = qos->ucast.framing;
pdu->c_latency = cpu_to_le16(qos->ucast.out.latency);
pdu->p_latency = cpu_to_le16(qos->ucast.in.latency);
/* Reprogram all CIS(s) with the same CIG, valid range are:
* num_cis: 0x00 to 0x1F
* cis_id: 0x00 to 0xEF
*/
for (cis_id = 0x00; cis_id < 0xf0 &&
aux_num_cis < pdu->num_cis; cis_id++) {
struct hci_cis_params *cis;
conn = hci_conn_hash_lookup_cis(hdev, NULL, 0, cig_id, cis_id);
if (!conn)
continue;
qos = &conn->iso_qos;
cis = &pdu->cis[aux_num_cis++];
cis->cis_id = cis_id;
cis->c_sdu = cpu_to_le16(conn->iso_qos.ucast.out.sdu);
cis->p_sdu = cpu_to_le16(conn->iso_qos.ucast.in.sdu);
cis->c_phy = qos->ucast.out.phy ? qos->ucast.out.phy :
qos->ucast.in.phy;
cis->p_phy = qos->ucast.in.phy ? qos->ucast.in.phy :
qos->ucast.out.phy;
cis->c_rtn = qos->ucast.out.rtn;
cis->p_rtn = qos->ucast.in.rtn;
}
pdu->num_cis = aux_num_cis;
if (!pdu->num_cis)
return 0;
return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_CIG_PARAMS,
struct_size(pdu, cis, pdu->num_cis),
pdu, HCI_CMD_TIMEOUT);
}
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
static bool hci_le_set_cig_params(struct hci_conn *conn, struct bt_iso_qos *qos)
{
struct hci_dev *hdev = conn->hdev;
struct iso_list_data data;
memset(&data, 0, sizeof(data));
/* Allocate first still reconfigurable CIG if not set */
if (qos->ucast.cig == BT_ISO_QOS_CIG_UNSET) {
for (data.cig = 0x00; data.cig < 0xf0; data.cig++) {
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
data.count = 0;
hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
BT_CONNECT, &data);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
if (data.count)
continue;
hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
BT_CONNECTED, &data);
if (!data.count)
break;
}
if (data.cig == 0xf0)
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return false;
/* Update CIG */
qos->ucast.cig = data.cig;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
if (qos->ucast.cis != BT_ISO_QOS_CIS_UNSET) {
if (hci_conn_hash_lookup_cis(hdev, NULL, 0, qos->ucast.cig,
qos->ucast.cis))
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return false;
goto done;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
/* Allocate first available CIS if not set */
for (data.cig = qos->ucast.cig, data.cis = 0x00; data.cis < 0xf0;
data.cis++) {
if (!hci_conn_hash_lookup_cis(hdev, NULL, 0, data.cig,
data.cis)) {
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* Update CIS */
qos->ucast.cis = data.cis;
break;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
}
if (qos->ucast.cis == BT_ISO_QOS_CIS_UNSET)
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return false;
done:
if (hci_cmd_sync_queue(hdev, set_cig_params_sync,
UINT_PTR(qos->ucast.cig), NULL) < 0)
return false;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return true;
}
struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst,
__u8 dst_type, struct bt_iso_qos *qos)
{
struct hci_conn *cis;
cis = hci_conn_hash_lookup_cis(hdev, dst, dst_type, qos->ucast.cig,
qos->ucast.cis);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
if (!cis) {
cis = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(cis))
return cis;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
cis->cleanup = cis_cleanup;
cis->dst_type = dst_type;
cis->iso_qos.ucast.cig = BT_ISO_QOS_CIG_UNSET;
cis->iso_qos.ucast.cis = BT_ISO_QOS_CIS_UNSET;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
if (cis->state == BT_CONNECTED)
return cis;
/* Check if CIS has been set and the settings matches */
if (cis->state == BT_BOUND &&
!memcmp(&cis->iso_qos, qos, sizeof(*qos)))
return cis;
/* Update LINK PHYs according to QoS preference */
cis->le_tx_phy = qos->ucast.out.phy;
cis->le_rx_phy = qos->ucast.in.phy;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* If output interval is not set use the input interval as it cannot be
* 0x000000.
*/
if (!qos->ucast.out.interval)
qos->ucast.out.interval = qos->ucast.in.interval;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* If input interval is not set use the output interval as it cannot be
* 0x000000.
*/
if (!qos->ucast.in.interval)
qos->ucast.in.interval = qos->ucast.out.interval;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* If output latency is not set use the input latency as it cannot be
* 0x0000.
*/
if (!qos->ucast.out.latency)
qos->ucast.out.latency = qos->ucast.in.latency;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* If input latency is not set use the output latency as it cannot be
* 0x0000.
*/
if (!qos->ucast.in.latency)
qos->ucast.in.latency = qos->ucast.out.latency;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
if (!hci_le_set_cig_params(cis, qos)) {
hci_conn_drop(cis);
return ERR_PTR(-EINVAL);
}
hci_conn_hold(cis);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
cis->iso_qos = *qos;
cis->state = BT_BOUND;
return cis;
}
bool hci_iso_setup_path(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
struct hci_cp_le_setup_iso_path cmd;
memset(&cmd, 0, sizeof(cmd));
if (conn->iso_qos.ucast.out.sdu) {
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
cmd.handle = cpu_to_le16(conn->handle);
cmd.direction = 0x00; /* Input (Host to Controller) */
cmd.path = 0x00; /* HCI path if enabled */
cmd.codec = 0x03; /* Transparent Data */
if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
&cmd) < 0)
return false;
}
if (conn->iso_qos.ucast.in.sdu) {
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
cmd.handle = cpu_to_le16(conn->handle);
cmd.direction = 0x01; /* Output (Controller to Host) */
cmd.path = 0x00; /* HCI path if enabled */
cmd.codec = 0x03; /* Transparent Data */
if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
&cmd) < 0)
return false;
}
return true;
}
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
int hci_conn_check_create_cis(struct hci_conn *conn)
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
{
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
if (conn->type != ISO_LINK || !bacmp(&conn->dst, BDADDR_ANY))
return -EINVAL;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
if (!conn->parent || conn->parent->state != BT_CONNECTED ||
conn->state != BT_CONNECT || HCI_CONN_HANDLE_UNSET(conn->handle))
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
return 1;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
return 0;
}
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
static int hci_create_cis_sync(struct hci_dev *hdev, void *data)
{
return hci_le_create_cis_sync(hdev);
}
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
int hci_le_create_cis_pending(struct hci_dev *hdev)
{
struct hci_conn *conn;
bool pending = false;
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
rcu_read_lock();
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) {
rcu_read_unlock();
return -EBUSY;
}
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
if (!hci_conn_check_create_cis(conn))
pending = true;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
rcu_read_unlock();
if (!pending)
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return 0;
/* Queue Create CIS */
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
return hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
}
static void hci_iso_qos_setup(struct hci_dev *hdev, struct hci_conn *conn,
struct bt_iso_io_qos *qos, __u8 phy)
{
/* Only set MTU if PHY is enabled */
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (!qos->sdu && qos->phy)
qos->sdu = conn->mtu;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
/* Use the same PHY as ACL if set to any */
if (qos->phy == BT_ISO_PHY_ANY)
qos->phy = phy;
/* Use LE ACL connection interval if not set */
if (!qos->interval)
/* ACL interval unit in 1.25 ms to us */
qos->interval = conn->le_conn_interval * 1250;
/* Use LE ACL connection latency if not set */
if (!qos->latency)
qos->latency = conn->le_conn_latency;
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
static int create_big_sync(struct hci_dev *hdev, void *data)
{
struct hci_conn *conn = data;
struct bt_iso_qos *qos = &conn->iso_qos;
u16 interval, sync_interval = 0;
u32 flags = 0;
int err;
if (qos->bcast.out.phy == 0x02)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
flags |= MGMT_ADV_FLAG_SEC_2M;
/* Align intervals */
interval = (qos->bcast.out.interval / 1250) * qos->bcast.sync_factor;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
if (qos->bcast.bis)
sync_interval = interval * 4;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
err = hci_start_per_adv_sync(hdev, qos->bcast.bis, conn->le_per_adv_data_len,
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
conn->le_per_adv_data, flags, interval,
interval, sync_interval);
if (err)
return err;
return hci_le_create_big(conn, &conn->iso_qos);
}
static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
{
bt_dev_dbg(hdev, "");
if (err)
bt_dev_err(hdev, "Unable to create PA: %d", err);
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
static bool hci_conn_check_create_pa_sync(struct hci_conn *conn)
{
if (conn->type != ISO_LINK || conn->sid == HCI_SID_INVALID)
return false;
return true;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static int create_pa_sync(struct hci_dev *hdev, void *data)
{
struct hci_cp_le_pa_create_sync cp = {0};
struct hci_conn *conn;
int err = 0;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
hci_dev_lock(hdev);
rcu_read_lock();
/* The spec allows only one pending LE Periodic Advertising Create
* Sync command at a time. If the command is pending now, don't do
* anything. We check for pending connections after each PA Sync
* Established event.
*
* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
* page 2493:
*
* If the Host issues this command when another HCI_LE_Periodic_
* Advertising_Create_Sync command is pending, the Controller shall
* return the error code Command Disallowed (0x0C).
*/
list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
if (test_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags))
goto unlock;
}
list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
if (hci_conn_check_create_pa_sync(conn)) {
struct bt_iso_qos *qos = &conn->iso_qos;
cp.options = qos->bcast.options;
cp.sid = conn->sid;
cp.addr_type = conn->dst_type;
bacpy(&cp.addr, &conn->dst);
cp.skip = cpu_to_le16(qos->bcast.skip);
cp.sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
cp.sync_cte_type = qos->bcast.sync_cte_type;
break;
}
}
unlock:
rcu_read_unlock();
hci_dev_unlock(hdev);
if (bacmp(&cp.addr, BDADDR_ANY)) {
hci_dev_set_flag(hdev, HCI_PA_SYNC);
set_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
err = __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC,
sizeof(cp), &cp, HCI_CMD_TIMEOUT);
if (!err)
err = hci_update_passive_scan_sync(hdev);
if (err) {
hci_dev_clear_flag(hdev, HCI_PA_SYNC);
clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
return err;
}
int hci_pa_create_sync_pending(struct hci_dev *hdev)
{
/* Queue start pa_create_sync and scan */
return hci_cmd_sync_queue(hdev, create_pa_sync,
NULL, create_pa_complete);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
__u8 dst_type, __u8 sid,
struct bt_iso_qos *qos)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
{
struct hci_conn *conn;
conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_SLAVE);
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-04 19:23:29 +00:00
if (IS_ERR(conn))
return conn;
conn->iso_qos = *qos;
conn->dst_type = dst_type;
conn->sid = sid;
conn->state = BT_LISTEN;
hci_conn_hold(conn);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
hci_pa_create_sync_pending(hdev);
return conn;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static bool hci_conn_check_create_big_sync(struct hci_conn *conn)
{
if (!conn->num_bis)
return false;
return true;
}
Bluetooth: ISO: Send BIG Create Sync via hci_sync Before issuing the LE BIG Create Sync command, an available BIG handle is chosen by iterating through the conn_hash list and finding the first unused value. If a BIG is terminated, the associated hcons are removed from the list and the LE BIG Terminate Sync command is sent via hci_sync queue. However, a new LE BIG Create sync command might be issued via hci_send_cmd, before the previous BIG sync was terminated. This can cause the same BIG handle to be reused and the LE BIG Create Sync to fail with Command Disallowed. < HCI Command: LE Broadcast Isochronous Group Create Sync (0x08|0x006b) BIG Handle: 0x00 BIG Sync Handle: 0x0002 Encryption: Unencrypted (0x00) Broadcast Code[16]: 00000000000000000000000000000000 Maximum Number Subevents: 0x00 Timeout: 20000 ms (0x07d0) Number of BIS: 1 BIS ID: 0x01 > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: LE Broadcast Isochronous Group Terminate Sync (0x08|0x006c) BIG Handle: 0x00 This commit fixes the ordering of the LE BIG Create Sync/LE BIG Terminate Sync commands, to make sure that either the previous BIG sync is terminated before reusing the handle, or that a new handle is chosen for a new sync. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-11 11:47:08 +00:00
static void big_create_sync_complete(struct hci_dev *hdev, void *data, int err)
{
bt_dev_dbg(hdev, "");
if (err)
bt_dev_err(hdev, "Unable to create BIG sync: %d", err);
}
static int big_create_sync(struct hci_dev *hdev, void *data)
{
DEFINE_FLEX(struct hci_cp_le_big_create_sync, pdu, bis, num_bis, 0x11);
struct hci_conn *conn;
rcu_read_lock();
pdu->num_bis = 0;
/* The spec allows only one pending LE BIG Create Sync command at
* a time. If the command is pending now, don't do anything. We
* check for pending connections after each BIG Sync Established
* event.
*
* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
* page 2586:
*
* If the Host sends this command when the Controller is in the
* process of synchronizing to any BIG, i.e. the HCI_LE_BIG_Sync_
* Established event has not been generated, the Controller shall
* return the error code Command Disallowed (0x0C).
*/
list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
if (test_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags))
goto unlock;
}
list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
if (hci_conn_check_create_big_sync(conn)) {
struct bt_iso_qos *qos = &conn->iso_qos;
set_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags);
pdu->handle = qos->bcast.big;
pdu->sync_handle = cpu_to_le16(conn->sync_handle);
pdu->encryption = qos->bcast.encryption;
memcpy(pdu->bcode, qos->bcast.bcode,
sizeof(pdu->bcode));
pdu->mse = qos->bcast.mse;
pdu->timeout = cpu_to_le16(qos->bcast.timeout);
pdu->num_bis = conn->num_bis;
memcpy(pdu->bis, conn->bis, conn->num_bis);
break;
}
}
unlock:
rcu_read_unlock();
if (!pdu->num_bis)
return 0;
return hci_send_cmd(hdev, HCI_OP_LE_BIG_CREATE_SYNC,
struct_size(pdu, bis, pdu->num_bis), pdu);
}
Bluetooth: ISO: Send BIG Create Sync via hci_sync Before issuing the LE BIG Create Sync command, an available BIG handle is chosen by iterating through the conn_hash list and finding the first unused value. If a BIG is terminated, the associated hcons are removed from the list and the LE BIG Terminate Sync command is sent via hci_sync queue. However, a new LE BIG Create sync command might be issued via hci_send_cmd, before the previous BIG sync was terminated. This can cause the same BIG handle to be reused and the LE BIG Create Sync to fail with Command Disallowed. < HCI Command: LE Broadcast Isochronous Group Create Sync (0x08|0x006b) BIG Handle: 0x00 BIG Sync Handle: 0x0002 Encryption: Unencrypted (0x00) Broadcast Code[16]: 00000000000000000000000000000000 Maximum Number Subevents: 0x00 Timeout: 20000 ms (0x07d0) Number of BIS: 1 BIS ID: 0x01 > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: LE Broadcast Isochronous Group Terminate Sync (0x08|0x006c) BIG Handle: 0x00 This commit fixes the ordering of the LE BIG Create Sync/LE BIG Terminate Sync commands, to make sure that either the previous BIG sync is terminated before reusing the handle, or that a new handle is chosen for a new sync. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-11 11:47:08 +00:00
int hci_le_big_create_sync_pending(struct hci_dev *hdev)
{
/* Queue big_create_sync */
return hci_cmd_sync_queue_once(hdev, big_create_sync,
NULL, big_create_sync_complete);
}
int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
struct bt_iso_qos *qos,
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
__u16 sync_handle, __u8 num_bis, __u8 bis[])
{
int err;
if (num_bis < 0x01 || num_bis > ISO_MAX_NUM_BIS)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return -EINVAL;
err = qos_set_big(hdev, qos);
if (err)
return err;
if (hcon) {
/* Update hcon QoS */
hcon->iso_qos = *qos;
hcon->num_bis = num_bis;
memcpy(hcon->bis, bis, num_bis);
}
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
return hci_le_big_create_sync_pending(hdev);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
}
static void create_big_complete(struct hci_dev *hdev, void *data, int err)
{
struct hci_conn *conn = data;
bt_dev_dbg(hdev, "conn %p", conn);
if (err) {
bt_dev_err(hdev, "Unable to create BIG: %d", err);
hci_connect_cfm(conn, err);
hci_conn_del(conn);
}
}
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
struct hci_conn *hci_bind_bis(struct hci_dev *hdev, bdaddr_t *dst,
struct bt_iso_qos *qos,
__u8 base_len, __u8 *base)
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
{
struct hci_conn *conn;
struct hci_conn *parent;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
__u8 eir[HCI_MAX_PER_AD_LENGTH];
struct hci_link *link;
/* Look for any BIS that is open for rebinding */
conn = hci_conn_hash_lookup_big_state(hdev, qos->bcast.big, BT_OPEN);
if (conn) {
memcpy(qos, &conn->iso_qos, sizeof(*qos));
conn->state = BT_CONNECTED;
return conn;
}
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
if (base_len && base)
base_len = eir_append_service_data(eir, 0, 0x1851,
base, base_len);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* We need hci_conn object using the BDADDR_ANY as dst */
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
conn = hci_add_bis(hdev, dst, qos, base_len, eir);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
if (IS_ERR(conn))
return conn;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
/* Update LINK PHYs according to QoS preference */
conn->le_tx_phy = qos->bcast.out.phy;
conn->le_tx_phy = qos->bcast.out.phy;
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Add Basic Announcement into Peridic Adv Data if BASE is set */
if (base_len && base) {
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
memcpy(conn->le_per_adv_data, eir, sizeof(eir));
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
conn->le_per_adv_data_len = base_len;
}
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
hci_iso_qos_setup(hdev, conn, &qos->bcast.out,
conn->le_tx_phy ? conn->le_tx_phy :
hdev->le_tx_def_phys);
conn->iso_qos = *qos;
conn->state = BT_BOUND;
/* Link BISes together */
parent = hci_conn_hash_lookup_big(hdev,
conn->iso_qos.bcast.big);
if (parent && parent != conn) {
link = hci_conn_link(parent, conn);
hci_conn_drop(conn);
if (!link)
return ERR_PTR(-ENOLINK);
}
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
return conn;
}
static void bis_mark_per_adv(struct hci_conn *conn, void *data)
{
struct iso_list_data *d = data;
/* Skip if not broadcast/ANY address */
if (bacmp(&conn->dst, BDADDR_ANY))
return;
if (d->big != conn->iso_qos.bcast.big ||
d->bis == BT_ISO_QOS_BIS_UNSET ||
d->bis != conn->iso_qos.bcast.bis)
return;
set_bit(HCI_CONN_PER_ADV, &conn->flags);
}
struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
__u8 dst_type, struct bt_iso_qos *qos,
__u8 base_len, __u8 *base)
{
struct hci_conn *conn;
int err;
struct iso_list_data data;
conn = hci_bind_bis(hdev, dst, qos, base_len, base);
if (IS_ERR(conn))
return conn;
if (conn->state == BT_CONNECTED)
return conn;
Bluetooth: ISO: Add support for connecting multiple BISes It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-30 14:21:59 +00:00
data.big = qos->bcast.big;
data.bis = qos->bcast.bis;
/* Set HCI_CONN_PER_ADV for all bound connections, to mark that
* the start periodic advertising and create BIG commands have
* been queued
*/
hci_conn_hash_list_state(hdev, bis_mark_per_adv, ISO_LINK,
BT_BOUND, &data);
Bluetooth: Add initial implementation of BIS connections This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-09 21:22:20 +00:00
/* Queue start periodic advertising and create BIG */
err = hci_cmd_sync_queue(hdev, create_big_sync, conn,
create_big_complete);
if (err < 0) {
hci_conn_drop(conn);
return ERR_PTR(err);
}
return conn;
}
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst,
__u8 dst_type, struct bt_iso_qos *qos)
{
struct hci_conn *le;
struct hci_conn *cis;
struct hci_link *link;
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
if (hci_dev_test_flag(hdev, HCI_ADVERTISING))
le = hci_connect_le(hdev, dst, dst_type, false,
BT_SECURITY_LOW,
HCI_LE_CONN_TIMEOUT,
HCI_ROLE_SLAVE, 0, 0);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
else
le = hci_connect_le_scan(hdev, dst, dst_type,
BT_SECURITY_LOW,
HCI_LE_CONN_TIMEOUT,
CONN_REASON_ISO_CONNECT);
if (IS_ERR(le))
return le;
hci_iso_qos_setup(hdev, le, &qos->ucast.out,
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
le->le_tx_phy ? le->le_tx_phy : hdev->le_tx_def_phys);
hci_iso_qos_setup(hdev, le, &qos->ucast.in,
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
le->le_rx_phy ? le->le_rx_phy : hdev->le_rx_def_phys);
cis = hci_bind_cis(hdev, dst, dst_type, qos);
if (IS_ERR(cis)) {
hci_conn_drop(le);
return cis;
}
link = hci_conn_link(le, cis);
hci_conn_drop(cis);
if (!link) {
hci_conn_drop(le);
return ERR_PTR(-ENOLINK);
}
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-01 06:34:46 +00:00
cis->state = BT_CONNECT;
hci_le_create_cis_pending(hdev);
Bluetooth: Add initial implementation of CIS connections This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2019-07-29 15:15:43 +00:00
return cis;
}
/* Check link security requirement */
int hci_conn_check_link_mode(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
/* In Secure Connections Only mode, it is required that Secure
* Connections is used and the link is encrypted with AES-CCM
* using a P-256 authenticated combination key.
*/
if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
if (!hci_conn_sc_enabled(conn) ||
!test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
return 0;
}
/* AES encryption is required for Level 4:
*
* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C
* page 1319:
*
* 128-bit equivalent strength for link and encryption keys
* required using FIPS approved algorithms (E0 not allowed,
* SAFER+ not allowed, and P-192 not allowed; encryption key
* not shortened)
*/
if (conn->sec_level == BT_SECURITY_FIPS &&
!test_bit(HCI_CONN_AES_CCM, &conn->flags)) {
bt_dev_err(conn->hdev,
"Invalid security: Missing AES-CCM usage");
return 0;
}
if (hci_conn_ssp_enabled(conn) &&
!test_bit(HCI_CONN_ENCRYPT, &conn->flags))
return 0;
return 1;
}
/* Authenticate remote device */
static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
{
BT_DBG("hcon %p", conn);
if (conn->pending_sec_level > sec_level)
sec_level = conn->pending_sec_level;
if (sec_level > conn->sec_level)
conn->pending_sec_level = sec_level;
else if (test_bit(HCI_CONN_AUTH, &conn->flags))
return 1;
/* Make sure we preserve an existing MITM requirement*/
auth_type |= (conn->auth_type & 0x01);
conn->auth_type = auth_type;
if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
struct hci_cp_auth_requested cp;
cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
/* Set the ENCRYPT_PEND to trigger encryption after
* authentication.
*/
if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags))
set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
}
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
return 0;
}
/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
struct hci_cp_set_conn_encrypt cp;
cp.handle = cpu_to_le16(conn->handle);
cp.encrypt = 0x01;
hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
&cp);
}
}
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
/* Enable security */
int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
bool initiator)
{
BT_DBG("hcon %p", conn);
if (conn->type == LE_LINK)
return smp_conn_security(conn, sec_level);
/* For sdp we don't need the link key. */
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
if (sec_level == BT_SECURITY_SDP)
return 1;
/* For non 2.1 devices and low security level we don't need the link
key. */
if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
return 1;
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
/* For other security levels we need the link key. */
if (!test_bit(HCI_CONN_AUTH, &conn->flags))
goto auth;
switch (conn->key_type) {
case HCI_LK_AUTH_COMBINATION_P256:
/* An authenticated FIPS approved combination key has
* sufficient security for security level 4 or lower.
*/
if (sec_level <= BT_SECURITY_FIPS)
goto encrypt;
break;
case HCI_LK_AUTH_COMBINATION_P192:
/* An authenticated combination key has sufficient security for
* security level 3 or lower.
*/
if (sec_level <= BT_SECURITY_HIGH)
goto encrypt;
break;
case HCI_LK_UNAUTH_COMBINATION_P192:
case HCI_LK_UNAUTH_COMBINATION_P256:
/* An unauthenticated combination key has sufficient security
* for security level 2 or lower.
*/
if (sec_level <= BT_SECURITY_MEDIUM)
goto encrypt;
break;
case HCI_LK_COMBINATION:
/* A combination key has always sufficient security for the
* security levels 2 or lower. High security level requires the
* combination key is generated using maximum PIN code length
* (16). For pre 2.1 units.
*/
if (sec_level <= BT_SECURITY_MEDIUM || conn->pin_length == 16)
goto encrypt;
break;
default:
break;
}
auth:
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
return 0;
if (initiator)
set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
if (!hci_conn_auth(conn, sec_level, auth_type))
return 0;
encrypt:
if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
/* Ensure that the encryption key size has been read,
* otherwise stall the upper layer responses.
*/
if (!conn->enc_key_size)
return 0;
/* Nothing else needed, all requirements are met */
return 1;
}
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
hci_conn_encrypt(conn);
return 0;
}
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
EXPORT_SYMBOL(hci_conn_security);
/* Check secure link requirement */
int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
{
BT_DBG("hcon %p", conn);
/* Accept if non-secure or higher security level is required */
if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
return 1;
/* Accept if secure or higher security level is already present */
if (conn->sec_level == BT_SECURITY_HIGH ||
conn->sec_level == BT_SECURITY_FIPS)
return 1;
/* Reject not secure link */
return 0;
}
EXPORT_SYMBOL(hci_conn_check_secure);
/* Switch role */
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
{
BT_DBG("hcon %p", conn);
if (role == conn->role)
return 1;
if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
struct hci_cp_switch_role cp;
bacpy(&cp.bdaddr, &conn->dst);
cp.role = role;
hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
}
Bluetooth: Add enhanced security model for Simple Pairing The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-15 20:58:04 +00:00
return 0;
}
EXPORT_SYMBOL(hci_conn_switch_role);
/* Enter active mode */
void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
{
struct hci_dev *hdev = conn->hdev;
BT_DBG("hcon %p mode %d", conn, conn->mode);
if (conn->mode != HCI_CM_SNIFF)
goto timer;
if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
goto timer;
if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
struct hci_cp_exit_sniff_mode cp;
cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
}
timer:
if (hdev->idle_timeout > 0)
queue_delayed_work(hdev->workqueue, &conn->idle_work,
msecs_to_jiffies(hdev->idle_timeout));
}
/* Drop all connection on the device */
void hci_conn_hash_flush(struct hci_dev *hdev)
{
struct list_head *head = &hdev->conn_hash.list;
struct hci_conn *conn;
BT_DBG("hdev %s", hdev->name);
/* We should not traverse the list here, because hci_conn_del
* can remove extra links, which may cause the list traversal
* to hit items that have already been released.
*/
while ((conn = list_first_entry_or_null(head,
struct hci_conn,
list)) != NULL) {
conn->state = BT_CLOSED;
hci_disconn_cfm(conn, HCI_ERROR_LOCAL_HOST_TERM);
hci_conn_del(conn);
}
}
static u32 get_link_mode(struct hci_conn *conn)
{
u32 link_mode = 0;
if (conn->role == HCI_ROLE_MASTER)
link_mode |= HCI_LM_MASTER;
if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
link_mode |= HCI_LM_ENCRYPT;
if (test_bit(HCI_CONN_AUTH, &conn->flags))
link_mode |= HCI_LM_AUTH;
if (test_bit(HCI_CONN_SECURE, &conn->flags))
link_mode |= HCI_LM_SECURE;
if (test_bit(HCI_CONN_FIPS, &conn->flags))
link_mode |= HCI_LM_FIPS;
return link_mode;
}
int hci_get_conn_list(void __user *arg)
{
struct hci_conn *c;
struct hci_conn_list_req req, *cl;
struct hci_conn_info *ci;
struct hci_dev *hdev;
int n = 0, size, err;
if (copy_from_user(&req, arg, sizeof(req)))
return -EFAULT;
if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
return -EINVAL;
size = sizeof(req) + req.conn_num * sizeof(*ci);
cl = kmalloc(size, GFP_KERNEL);
if (!cl)
return -ENOMEM;
hdev = hci_dev_get(req.dev_id);
if (!hdev) {
kfree(cl);
return -ENODEV;
}
ci = cl->conn_info;
hci_dev_lock(hdev);
list_for_each_entry(c, &hdev->conn_hash.list, list) {
bacpy(&(ci + n)->bdaddr, &c->dst);
(ci + n)->handle = c->handle;
(ci + n)->type = c->type;
(ci + n)->out = c->out;
(ci + n)->state = c->state;
(ci + n)->link_mode = get_link_mode(c);
if (++n >= req.conn_num)
break;
}
hci_dev_unlock(hdev);
cl->dev_id = hdev->id;
cl->conn_num = n;
size = sizeof(req) + n * sizeof(*ci);
hci_dev_put(hdev);
err = copy_to_user(arg, cl, size);
kfree(cl);
return err ? -EFAULT : 0;
}
int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
{
struct hci_conn_info_req req;
struct hci_conn_info ci;
struct hci_conn *conn;
char __user *ptr = arg + sizeof(req);
if (copy_from_user(&req, arg, sizeof(req)))
return -EFAULT;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
if (conn) {
bacpy(&ci.bdaddr, &conn->dst);
ci.handle = conn->handle;
ci.type = conn->type;
ci.out = conn->out;
ci.state = conn->state;
ci.link_mode = get_link_mode(conn);
}
hci_dev_unlock(hdev);
if (!conn)
return -ENOENT;
return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
}
int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
{
struct hci_auth_info_req req;
struct hci_conn *conn;
if (copy_from_user(&req, arg, sizeof(req)))
return -EFAULT;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
if (conn)
req.type = conn->auth_type;
hci_dev_unlock(hdev);
if (!conn)
return -ENOENT;
return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
}
struct hci_chan *hci_chan_create(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
struct hci_chan *chan;
BT_DBG("%s hcon %p", hdev->name, conn);
if (test_bit(HCI_CONN_DROP, &conn->flags)) {
BT_DBG("Refusing to create new hci_chan");
return NULL;
}
chan = kzalloc(sizeof(*chan), GFP_KERNEL);
if (!chan)
return NULL;
chan->conn = hci_conn_get(conn);
skb_queue_head_init(&chan->data_q);
chan->state = BT_CONNECTED;
list_add_rcu(&chan->list, &conn->chan_list);
return chan;
}
void hci_chan_del(struct hci_chan *chan)
{
struct hci_conn *conn = chan->conn;
struct hci_dev *hdev = conn->hdev;
BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
list_del_rcu(&chan->list);
synchronize_rcu();
/* Prevent new hci_chan's to be created for this hci_conn */
set_bit(HCI_CONN_DROP, &conn->flags);
hci_conn_put(conn);
skb_queue_purge(&chan->data_q);
kfree(chan);
}
void hci_chan_list_flush(struct hci_conn *conn)
{
struct hci_chan *chan, *n;
BT_DBG("hcon %p", conn);
list_for_each_entry_safe(chan, n, &conn->chan_list, list)
hci_chan_del(chan);
}
static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
__u16 handle)
{
struct hci_chan *hchan;
list_for_each_entry(hchan, &hcon->chan_list, list) {
if (hchan->handle == handle)
return hchan;
}
return NULL;
}
struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
{
struct hci_conn_hash *h = &hdev->conn_hash;
struct hci_conn *hcon;
struct hci_chan *hchan = NULL;
rcu_read_lock();
list_for_each_entry_rcu(hcon, &h->list, list) {
hchan = __hci_chan_lookup_handle(hcon, handle);
if (hchan)
break;
}
rcu_read_unlock();
return hchan;
}
u32 hci_conn_get_phy(struct hci_conn *conn)
{
u32 phys = 0;
/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
* Table 6.2: Packets defined for synchronous, asynchronous, and
* CPB logical transport types.
*/
switch (conn->type) {
case SCO_LINK:
/* SCO logical transport (1 Mb/s):
* HV1, HV2, HV3 and DV.
*/
phys |= BT_PHY_BR_1M_1SLOT;
break;
case ACL_LINK:
/* ACL logical transport (1 Mb/s) ptt=0:
* DH1, DM3, DH3, DM5 and DH5.
*/
phys |= BT_PHY_BR_1M_1SLOT;
if (conn->pkt_type & (HCI_DM3 | HCI_DH3))
phys |= BT_PHY_BR_1M_3SLOT;
if (conn->pkt_type & (HCI_DM5 | HCI_DH5))
phys |= BT_PHY_BR_1M_5SLOT;
/* ACL logical transport (2 Mb/s) ptt=1:
* 2-DH1, 2-DH3 and 2-DH5.
*/
if (!(conn->pkt_type & HCI_2DH1))
phys |= BT_PHY_EDR_2M_1SLOT;
if (!(conn->pkt_type & HCI_2DH3))
phys |= BT_PHY_EDR_2M_3SLOT;
if (!(conn->pkt_type & HCI_2DH5))
phys |= BT_PHY_EDR_2M_5SLOT;
/* ACL logical transport (3 Mb/s) ptt=1:
* 3-DH1, 3-DH3 and 3-DH5.
*/
if (!(conn->pkt_type & HCI_3DH1))
phys |= BT_PHY_EDR_3M_1SLOT;
if (!(conn->pkt_type & HCI_3DH3))
phys |= BT_PHY_EDR_3M_3SLOT;
if (!(conn->pkt_type & HCI_3DH5))
phys |= BT_PHY_EDR_3M_5SLOT;
break;
case ESCO_LINK:
/* eSCO logical transport (1 Mb/s): EV3, EV4 and EV5 */
phys |= BT_PHY_BR_1M_1SLOT;
if (!(conn->pkt_type & (ESCO_EV4 | ESCO_EV5)))
phys |= BT_PHY_BR_1M_3SLOT;
/* eSCO logical transport (2 Mb/s): 2-EV3, 2-EV5 */
if (!(conn->pkt_type & ESCO_2EV3))
phys |= BT_PHY_EDR_2M_1SLOT;
if (!(conn->pkt_type & ESCO_2EV5))
phys |= BT_PHY_EDR_2M_3SLOT;
/* eSCO logical transport (3 Mb/s): 3-EV3, 3-EV5 */
if (!(conn->pkt_type & ESCO_3EV3))
phys |= BT_PHY_EDR_3M_1SLOT;
if (!(conn->pkt_type & ESCO_3EV5))
phys |= BT_PHY_EDR_3M_3SLOT;
break;
case LE_LINK:
if (conn->le_tx_phy & HCI_LE_SET_PHY_1M)
phys |= BT_PHY_LE_1M_TX;
if (conn->le_rx_phy & HCI_LE_SET_PHY_1M)
phys |= BT_PHY_LE_1M_RX;
if (conn->le_tx_phy & HCI_LE_SET_PHY_2M)
phys |= BT_PHY_LE_2M_TX;
if (conn->le_rx_phy & HCI_LE_SET_PHY_2M)
phys |= BT_PHY_LE_2M_RX;
if (conn->le_tx_phy & HCI_LE_SET_PHY_CODED)
phys |= BT_PHY_LE_CODED_TX;
if (conn->le_rx_phy & HCI_LE_SET_PHY_CODED)
phys |= BT_PHY_LE_CODED_RX;
break;
}
return phys;
}
static int abort_conn_sync(struct hci_dev *hdev, void *data)
{
struct hci_conn *conn = data;
if (!hci_conn_valid(hdev, conn))
return -ECANCELED;
return hci_abort_conn_sync(hdev, conn, conn->abort_reason);
}
int hci_abort_conn(struct hci_conn *conn, u8 reason)
{
struct hci_dev *hdev = conn->hdev;
/* If abort_reason has already been set it means the connection is
* already being aborted so don't attempt to overwrite it.
*/
if (conn->abort_reason)
return 0;
bt_dev_dbg(hdev, "handle 0x%2.2x reason 0x%2.2x", conn->handle, reason);
conn->abort_reason = reason;
/* If the connection is pending check the command opcode since that
* might be blocking on hci_cmd_sync_work while waiting its respective
* event so we need to hci_cmd_sync_cancel to cancel it.
*
* hci_connect_le serializes the connection attempts so only one
* connection can be in BT_CONNECT at time.
*/
if (conn->state == BT_CONNECT && hdev->req_status == HCI_REQ_PEND) {
switch (hci_skb_event(hdev->sent_cmd)) {
case HCI_EV_CONN_COMPLETE:
case HCI_EV_LE_CONN_COMPLETE:
case HCI_EV_LE_ENHANCED_CONN_COMPLETE:
case HCI_EVT_LE_CIS_ESTABLISHED:
hci_cmd_sync_cancel(hdev, ECANCELED);
break;
}
/* Cancel connect attempt if still queued/pending */
} else if (!hci_cancel_connect_sync(hdev, conn)) {
return 0;
}
/* Run immediately if on cmd_sync_work since this may be called
* as a result to MGMT_OP_DISCONNECT/MGMT_OP_UNPAIR which does
* already queue its callback on cmd_sync_work.
*/
return hci_cmd_sync_run_once(hdev, abort_conn_sync, conn, NULL);
}