mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-06 05:06:29 +00:00
soc: devicetree updates for v6.10, part 2
This is a follow-up to an earlier pull request for device tree changes,
as three platform maintainers sent their contents too late to be included
in the main set, but had not caused any further problems since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU
module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while
another one gets removed.
- The RISC-V platforms from Microchip, Starfive and and T-HEAD
get additional features for existing hardware, plus the
addition of the Milk-V Mars based on the StarFive VisionFive v2
board.
-----BEGIN PGP SIGNATURE-----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=iChs
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
This commit is contained in:
Linus Torvalds
commit
1b03616209
@ -157,6 +157,7 @@ properties:
|
||||
items:
|
||||
- enum:
|
||||
- bananapi,bpi-cm4io
|
||||
- mntre,reform2-cm4
|
||||
- const: bananapi,bpi-cm4
|
||||
- const: amlogic,a311d
|
||||
- const: amlogic,g12b
|
||||
@ -201,6 +202,18 @@ properties:
|
||||
- amlogic,ad402
|
||||
- const: amlogic,a1
|
||||
|
||||
- description: Boards with the Amlogic A4 A113L2 SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,ba400
|
||||
- const: amlogic,a4
|
||||
|
||||
- description: Boards with the Amlogic A5 A113X2 SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,av400
|
||||
- const: amlogic,a5
|
||||
|
||||
- description: Boards with the Amlogic C3 C302X/C308L SoC
|
||||
items:
|
||||
- enum:
|
||||
|
||||
@ -35,7 +35,10 @@ properties:
|
||||
- ampere,mtjade-bmc
|
||||
- aspeed,ast2500-evb
|
||||
- asrock,e3c246d4i-bmc
|
||||
- asrock,e3c256d4i-bmc
|
||||
- asrock,romed8hm3-bmc
|
||||
- asrock,spc621d8hm3-bmc
|
||||
- asrock,x570d4u-bmc
|
||||
- bytedance,g220a-bmc
|
||||
- facebook,cmm-bmc
|
||||
- facebook,minipack-bmc
|
||||
@ -74,15 +77,18 @@ properties:
|
||||
- ampere,mtmitchell-bmc
|
||||
- aspeed,ast2600-evb
|
||||
- aspeed,ast2600-evb-a1
|
||||
- asus,x4tf-bmc
|
||||
- facebook,bletchley-bmc
|
||||
- facebook,cloudripper-bmc
|
||||
- facebook,elbert-bmc
|
||||
- facebook,fuji-bmc
|
||||
- facebook,greatlakes-bmc
|
||||
- facebook,harma-bmc
|
||||
- facebook,minerva-cmc
|
||||
- facebook,yosemite4-bmc
|
||||
- ibm,everest-bmc
|
||||
- ibm,rainier-bmc
|
||||
- ibm,system1-bmc
|
||||
- ibm,tacoma-bmc
|
||||
- inventec,starscream-bmc
|
||||
- inventec,transformer-bmc
|
||||
|
||||
@ -26,6 +26,7 @@ properties:
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- milkv,mars
|
||||
- starfive,visionfive-2-v1.2a
|
||||
- starfive,visionfive-2-v1.3b
|
||||
- const: starfive,jh7110
|
||||
|
||||
@ -54,7 +54,9 @@ properties:
|
||||
- const: amlogic,meson-gx-uart
|
||||
- description: UART controller on S4 compatible SoCs
|
||||
items:
|
||||
- const: amlogic,t7-uart
|
||||
- enum:
|
||||
- amlogic,a4-uart
|
||||
- amlogic,t7-uart
|
||||
- const: amlogic,meson-s4-uart
|
||||
|
||||
reg:
|
||||
|
||||
@ -164,6 +164,8 @@ properties:
|
||||
- isil,isl29030
|
||||
# Intersil ISL68137 Digital Output Configurable PWM Controller
|
||||
- isil,isl68137
|
||||
# Intersil ISL69269 PMBus Voltage Regulator
|
||||
- isil,isl69269
|
||||
# Intersil ISL76682 Ambient Light Sensor
|
||||
- isil,isl76682
|
||||
# Linear Technology LTC2488
|
||||
|
||||
@ -9,17 +9,21 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
|
||||
aspeed-bmc-ampere-mtmitchell.dtb \
|
||||
aspeed-bmc-arm-stardragon4800-rep2.dtb \
|
||||
aspeed-bmc-asrock-e3c246d4i.dtb \
|
||||
aspeed-bmc-asrock-e3c256d4i.dtb \
|
||||
aspeed-bmc-asrock-romed8hm3.dtb \
|
||||
aspeed-bmc-asrock-spc621d8hm3.dtb \
|
||||
aspeed-bmc-asrock-x570d4u.dtb \
|
||||
aspeed-bmc-asus-x4tf.dtb \
|
||||
aspeed-bmc-bytedance-g220a.dtb \
|
||||
aspeed-bmc-delta-ahe50dc.dtb \
|
||||
aspeed-bmc-facebook-bletchley.dtb \
|
||||
aspeed-bmc-facebook-cloudripper.dtb \
|
||||
aspeed-bmc-facebook-cmm.dtb \
|
||||
aspeed-bmc-facebook-elbert.dtb \
|
||||
aspeed-bmc-facebook-fuji.dtb \
|
||||
aspeed-bmc-facebook-galaxy100.dtb \
|
||||
aspeed-bmc-facebook-greatlakes.dtb \
|
||||
aspeed-bmc-facebook-minerva-cmc.dtb \
|
||||
aspeed-bmc-facebook-harma.dtb \
|
||||
aspeed-bmc-facebook-minerva.dtb \
|
||||
aspeed-bmc-facebook-minipack.dtb \
|
||||
aspeed-bmc-facebook-tiogapass.dtb \
|
||||
aspeed-bmc-facebook-wedge40.dtb \
|
||||
@ -33,6 +37,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
|
||||
aspeed-bmc-ibm-rainier.dtb \
|
||||
aspeed-bmc-ibm-rainier-1s4u.dtb \
|
||||
aspeed-bmc-ibm-rainier-4u.dtb \
|
||||
aspeed-bmc-ibm-system1.dtb \
|
||||
aspeed-bmc-intel-s2600wf.dtb \
|
||||
aspeed-bmc-inspur-fp5280g2.dtb \
|
||||
aspeed-bmc-inspur-nf5280m6.dtb \
|
||||
|
||||
@ -813,7 +813,6 @@ bmc_ast2600_cpu: temperature-sensor@35 {
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
ref_voltage = <2500>;
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
|
||||
@ -83,6 +83,9 @@ &mac0 {
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
|
||||
|
||||
nvmem-cells = <ð0_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
@ -103,6 +106,12 @@ eeprom@57 {
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x57>;
|
||||
pagesize = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_macaddress: macaddress@3f80 {
|
||||
reg = <0x3f80 6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
322
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
Normal file
322
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
Normal file
@ -0,0 +1,322 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/watchdog/aspeed-wdt.h>
|
||||
|
||||
/{
|
||||
model = "ASRock E3C256D4I BMC";
|
||||
compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
|
||||
i2c20 = &i2c2mux0ch0;
|
||||
i2c21 = &i2c2mux0ch1;
|
||||
i2c22 = &i2c2mux0ch2;
|
||||
i2c23 = &i2c2mux0ch3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/* BMC heartbeat */
|
||||
led-0 {
|
||||
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
linux,default-trigger = "timer";
|
||||
};
|
||||
|
||||
/* system fault */
|
||||
led-1 {
|
||||
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
|
||||
function = LED_FUNCTION_FAULT;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
||||
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
|
||||
<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <100000000>; /* 100 MHz */
|
||||
#include "openbmc-flash-layout-64.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_routing {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
|
||||
|
||||
nvmem-cells = <ð0_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c2mux0ch0: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
i2c2mux0ch1: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
i2c2mux0ch2: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
i2c2mux0ch3: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
|
||||
vrm@60 {
|
||||
compatible = "isil,isl69269";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
|
||||
/* FRU eeprom */
|
||||
eeprom@57 {
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x57>;
|
||||
pagesize = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_macaddress: macaddress@3f80 {
|
||||
reg = <0x3f80 6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&video {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&kcs3 {
|
||||
status = "okay";
|
||||
aspeed,lpc-io-reg = <0xca2>;
|
||||
};
|
||||
|
||||
&peci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
|
||||
&pinctrl_pwm2_default /* rear */
|
||||
&pinctrl_pwm4_default>; /* front */
|
||||
|
||||
/* CPU */
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
/* rear */
|
||||
fan@2 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
/* front */
|
||||
fan@4 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names =
|
||||
/* A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
|
||||
/* B */ "", "", "", "", "", "", "", "",
|
||||
/* C */ "", "", "", "", "", "", "", "",
|
||||
/* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
|
||||
"", "", "", "",
|
||||
/* E */ "", "", "", "", "", "", "", "",
|
||||
/* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
|
||||
"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
|
||||
/* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
|
||||
"", "", "", "",
|
||||
/* H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
|
||||
"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
|
||||
/* I */ "", "", "", "", "", "", "", "",
|
||||
/* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
|
||||
/* K */ "", "", "", "", "", "", "", "",
|
||||
/* L */ "", "", "", "", "", "", "", "",
|
||||
/* M */ "", "", "", "", "", "", "", "",
|
||||
/* N */ "", "", "", "", "", "", "", "",
|
||||
/* O */ "", "", "", "", "", "", "", "",
|
||||
/* P */ "", "", "", "", "", "", "", "",
|
||||
/* Q */ "", "", "", "", "", "", "", "",
|
||||
/* R */ "", "", "", "", "", "", "", "",
|
||||
/* S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
|
||||
/* T */ "", "", "", "", "", "", "", "",
|
||||
/* U */ "", "", "", "", "", "", "", "",
|
||||
/* V */ "", "", "", "", "", "", "", "",
|
||||
/* W */ "", "", "", "", "", "", "", "",
|
||||
/* X */ "", "", "", "", "", "", "", "",
|
||||
/* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
|
||||
/* Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
|
||||
"", "", "", "",
|
||||
/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
|
||||
"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
|
||||
/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
|
||||
/* AC */ "", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
|
||||
&pinctrl_adc1_default /* 5VSB */
|
||||
&pinctrl_adc2_default /* CPU1 */
|
||||
&pinctrl_adc3_default /* VCCSA */
|
||||
&pinctrl_adc4_default /* VCCM */
|
||||
&pinctrl_adc5_default /* V10M */
|
||||
&pinctrl_adc6_default /* VCCIO */
|
||||
&pinctrl_adc7_default /* VCCGT */
|
||||
&pinctrl_adc8_default /* VPPM */
|
||||
&pinctrl_adc9_default /* BAT */
|
||||
&pinctrl_adc10_default /* 3V */
|
||||
&pinctrl_adc11_default /* 5V */
|
||||
&pinctrl_adc12_default /* 12V */
|
||||
&pinctrl_adc13_default /* GND */
|
||||
&pinctrl_adc14_default /* GND */
|
||||
&pinctrl_adc15_default>; /* GND */
|
||||
};
|
||||
@ -71,6 +71,9 @@ &mac0 {
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
|
||||
|
||||
nvmem-cells = <ð0_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
@ -131,6 +134,12 @@ eeprom@50 {
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_macaddress: macaddress@3f80 {
|
||||
reg = <0x3f80 6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
324
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
Normal file
324
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
Normal file
@ -0,0 +1,324 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/{
|
||||
model = "ASRock SPC621D8HM3 BMC";
|
||||
compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
|
||||
i2c20 = &i2c1mux0ch0;
|
||||
i2c21 = &i2c1mux0ch1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/* BMC heartbeat */
|
||||
led-0 {
|
||||
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
linux,default-trigger = "timer";
|
||||
};
|
||||
|
||||
/* system fault */
|
||||
led-1 {
|
||||
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
|
||||
function = LED_FUNCTION_FAULT;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
||||
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
|
||||
<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>; /* 50 MHz */
|
||||
#include "openbmc-flash-layout-64.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vuart {
|
||||
status = "okay";
|
||||
aspeed,lpc-io-reg = <0x2f8>;
|
||||
aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
|
||||
|
||||
nvmem-cells = <ð0_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
/* hardware monitor/thermal sensor */
|
||||
temperature-sensor@29 {
|
||||
compatible = "nuvoton,nct7802";
|
||||
reg = <0x29>;
|
||||
};
|
||||
|
||||
/* motherboard temp sensor (TMP1, near BMC) */
|
||||
temperature-sensor@4c {
|
||||
compatible = "nuvoton,w83773g";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
/* motherboard FRU eeprom */
|
||||
eeprom@50 {
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_macaddress: macaddress@3f80 {
|
||||
reg = <0x3f80 6>;
|
||||
};
|
||||
};
|
||||
|
||||
/* M.2 slot smbus mux */
|
||||
i2c-mux@71 {
|
||||
compatible = "nxp,pca9545";
|
||||
reg = <0x71>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c1mux0ch0: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
i2c1mux0ch1: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&video {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&kcs3 {
|
||||
status = "okay";
|
||||
aspeed,lpc-io-reg = <0xca2>;
|
||||
};
|
||||
|
||||
&peci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default
|
||||
&pinctrl_pwm2_default
|
||||
&pinctrl_pwm3_default
|
||||
&pinctrl_pwm4_default>;
|
||||
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@2 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
fan@3 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
|
||||
};
|
||||
|
||||
fan@4 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names =
|
||||
/* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
|
||||
"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
|
||||
"", "", "", "",
|
||||
/* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
|
||||
"", "", "", "GPIO_RST",
|
||||
/* C */ "", "", "", "", "", "", "", "",
|
||||
/* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
|
||||
"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
|
||||
"NMI_BTN_N", "BMC_NMI",
|
||||
"", "",
|
||||
/* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
|
||||
/* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
|
||||
"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
|
||||
"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
|
||||
"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
|
||||
/* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
|
||||
"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
|
||||
/* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
|
||||
"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
|
||||
/* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
|
||||
"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
|
||||
"", "", "", "",
|
||||
/* J */ "", "", "", "", "", "", "", "",
|
||||
/* K */ "", "", "", "", "", "", "", "",
|
||||
/* L */ "", "", "", "", "", "", "", "",
|
||||
/* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
|
||||
"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
|
||||
"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
|
||||
"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
|
||||
/* N */ "", "", "", "", "", "", "", "",
|
||||
/* O */ "", "", "", "", "", "", "", "",
|
||||
/* P */ "", "", "", "", "", "", "", "",
|
||||
/* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
|
||||
/* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
|
||||
"", "FM_BMC_PCH_SCI_LPC_N", "", "",
|
||||
/* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
|
||||
"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
|
||||
"", "", "", "",
|
||||
/* T */ "", "", "", "", "", "", "", "",
|
||||
/* U */ "", "", "", "", "", "", "", "",
|
||||
/* V */ "", "", "", "", "", "", "", "",
|
||||
/* W */ "", "", "", "", "", "", "", "",
|
||||
/* X */ "", "", "", "", "", "", "", "",
|
||||
/* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
|
||||
"", "", "", "",
|
||||
/* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
|
||||
"", "", "", "",
|
||||
/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
|
||||
"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
|
||||
"", "IRQ_SML0_ALERT_MUX_N",
|
||||
"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
|
||||
/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
|
||||
"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
|
||||
"", "", "", "",
|
||||
/* AC */ "", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
|
||||
&pinctrl_adc1_default /* 5VSB */
|
||||
&pinctrl_adc2_default /* CPU1 */
|
||||
&pinctrl_adc3_default /* NC */
|
||||
&pinctrl_adc4_default /* VCCMABCD */
|
||||
&pinctrl_adc5_default /* VCCMEFGH */
|
||||
&pinctrl_adc6_default /* NC */
|
||||
&pinctrl_adc7_default /* NC */
|
||||
&pinctrl_adc8_default /* PVNN_PCH */
|
||||
&pinctrl_adc9_default /* 1P05PCH */
|
||||
&pinctrl_adc10_default /* 1P8PCH */
|
||||
&pinctrl_adc11_default /* BAT */
|
||||
&pinctrl_adc12_default /* 3V */
|
||||
&pinctrl_adc13_default /* 5V */
|
||||
&pinctrl_adc14_default /* 12V */
|
||||
&pinctrl_adc15_default>; /* GND */
|
||||
};
|
||||
360
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
Normal file
360
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
Normal file
@ -0,0 +1,360 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Asrock Rack X570D4U BMC";
|
||||
compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
i2c40 = &i2c4mux0ch0;
|
||||
i2c41 = &i2c4mux0ch1;
|
||||
i2c42 = &i2c4mux0ch2;
|
||||
i2c43 = &i2c4mux0ch3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
pci_memory: region@9a000000 {
|
||||
no-map;
|
||||
reg = <0x9a000000 0x00010000>; /* 64K */
|
||||
};
|
||||
|
||||
video_engine_memory: jpegbuffer {
|
||||
size = <0x02800000>; /* 40M */
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
|
||||
gfx_memory: framebuffer {
|
||||
size = <0x01000000>;
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
/* led-heartbeat-n */
|
||||
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
linux,default-trigger = "timer";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
/* led-fault-n */
|
||||
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
function = LED_FUNCTION_FAULT;
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
|
||||
<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
|
||||
<&adc 10>, <&adc 11>, <&adc 12>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names =
|
||||
/* A */ "input-locatorled-n", "", "", "", "", "", "", "",
|
||||
/* B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
|
||||
/* C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
|
||||
/* D */ "button-power-n", "control-power-n", "button-reset-n",
|
||||
"control-reset-n", "", "", "", "",
|
||||
/* E */ "", "", "", "", "", "", "", "",
|
||||
/* F */ "", "", "", "", "", "", "", "",
|
||||
/* G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
|
||||
"input-id2-n", "input-aux-smb-alert-n", "",
|
||||
"input-psu-smb-alert-n", "",
|
||||
/* H */ "", "", "", "", "input-mfg-mode-n", "",
|
||||
"led-heartbeat-n", "input-case-open-n",
|
||||
/* I */ "", "", "", "", "", "", "", "",
|
||||
/* J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
|
||||
/* K */ "", "", "", "", "", "", "", "",
|
||||
/* L */ "", "", "", "", "", "", "", "",
|
||||
/* M */ "", "", "", "", "", "", "", "",
|
||||
/* N */ "", "", "", "", "", "", "", "",
|
||||
/* O */ "", "", "", "", "", "", "", "",
|
||||
/* P */ "", "", "", "", "", "", "", "",
|
||||
/* Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
|
||||
"input-pcie-wake-n",
|
||||
/* R */ "", "", "", "", "", "", "", "",
|
||||
/* S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
|
||||
/* T */ "", "", "", "", "", "", "", "",
|
||||
/* U */ "", "", "", "", "", "", "", "",
|
||||
/* V */ "", "", "", "", "", "", "", "",
|
||||
/* W */ "", "", "", "", "", "", "", "",
|
||||
/* X */ "", "", "", "", "", "", "", "",
|
||||
/* Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
|
||||
"", "",
|
||||
/* Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
|
||||
"", "",
|
||||
/* AA */ "input-cpu1-thermtrip-latch-n", "",
|
||||
"input-cpu1-prochot-n", "", "", "", "", "",
|
||||
/* AB */ "", "input-power-good", "", "", "", "", "", "",
|
||||
/* AC */ "", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
label = "bmc";
|
||||
m25p,fast-read;
|
||||
spi-max-frequency = <10000000>;
|
||||
#include "openbmc-flash-layout-64.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vuart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
|
||||
|
||||
nvmem-cells = <ð0_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
|
||||
use-ncsi;
|
||||
|
||||
nvmem-cells = <ð1_macaddress>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
/* SMBus on auxiliary panel header (AUX_PANEL1) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
/* Hardware monitoring SMBus */
|
||||
status = "okay";
|
||||
|
||||
w83773g@4c {
|
||||
compatible = "nuvoton,w83773g";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
/* PSU SMBus (PSU_SMB1) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c4mux0ch0: i2c@0 {
|
||||
/* SMBus on PCI express 16x slot */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
i2c4mux0ch1: i2c@1 {
|
||||
/* SMBus on PCI express 8x slot */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
i2c4mux0ch2: i2c@2 {
|
||||
/* Unknown */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
i2c4mux0ch3: i2c@3 {
|
||||
/* SMBus on PCI express 1x slot */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
/* SMBus on BMC connector (BMC_SMB_1) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
/* FRU and SPD EEPROM SMBus */
|
||||
status = "okay";
|
||||
|
||||
eeprom@57 {
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x57>;
|
||||
pagesize = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eth0_macaddress: macaddress@3f80 {
|
||||
reg = <0x3f80 6>;
|
||||
};
|
||||
|
||||
eth1_macaddress: macaddress@3f88 {
|
||||
reg = <0x3f88 6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
/* SMBus on intelligent platform management bus header (IPMB_1) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gfx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
aspeed,external-nodes = <&gfx &lhc>;
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&kcs3 {
|
||||
aspeed,lpc-io-reg = <0xca2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&p2a {
|
||||
status = "okay";
|
||||
memory-region = <&pci_memory>;
|
||||
};
|
||||
|
||||
&video {
|
||||
status = "okay";
|
||||
memory-region = <&video_engine_memory>;
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default
|
||||
&pinctrl_pwm1_default
|
||||
&pinctrl_pwm2_default
|
||||
&pinctrl_pwm3_default
|
||||
&pinctrl_pwm4_default
|
||||
&pinctrl_pwm5_default>;
|
||||
|
||||
fan@0 {
|
||||
/* FAN1 (4-pin) */
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@1 {
|
||||
/* FAN2 (4-pin) */
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
||||
};
|
||||
|
||||
fan@2 {
|
||||
/* FAN3 (4-pin) */
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
fan@3 {
|
||||
/* FAN4 (6-pin) */
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
|
||||
};
|
||||
|
||||
fan@4 {
|
||||
/* FAN6 (6-pin) */
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
|
||||
};
|
||||
|
||||
fan@5 {
|
||||
/* FAN5 (6-pin) */
|
||||
reg = <0x05>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
|
||||
&pinctrl_adc1_default /* 5VSB */
|
||||
&pinctrl_adc2_default /* VCPU */
|
||||
&pinctrl_adc3_default /* VSOC */
|
||||
&pinctrl_adc4_default /* VCCM */
|
||||
&pinctrl_adc5_default /* APU-VDDP */
|
||||
&pinctrl_adc6_default /* PM-VDD-CLDO */
|
||||
&pinctrl_adc7_default /* PM-VDDCR-S5 */
|
||||
&pinctrl_adc8_default /* PM-VDDCR */
|
||||
&pinctrl_adc9_default /* VBAT */
|
||||
&pinctrl_adc10_default /* 3V */
|
||||
&pinctrl_adc11_default /* 5V */
|
||||
&pinctrl_adc12_default>; /* 12V */
|
||||
};
|
||||
581
arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
Normal file
581
arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
Normal file
@ -0,0 +1,581 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
// Copyright 2024 ASUS Corp.
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g6.dtsi"
|
||||
#include "aspeed-g6-pinctrl.dtsi"
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "ASUS-X4TF";
|
||||
compatible = "asus,x4tf-bmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial4:115200n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
video_engine_memory: video {
|
||||
size = <0x04000000>;
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
|
||||
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
|
||||
<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
|
||||
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-heartbeat {
|
||||
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-uid {
|
||||
gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-status_Y {
|
||||
gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-sys_boot_status {
|
||||
gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
vref = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
&pinctrl_adc4_default &pinctrl_adc5_default
|
||||
&pinctrl_adc6_default &pinctrl_adc7_default>;
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
vref = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
|
||||
&pinctrl_adc10_default &pinctrl_adc11_default
|
||||
&pinctrl_adc12_default &pinctrl_adc13_default
|
||||
&pinctrl_adc14_default &pinctrl_adc15_default>;
|
||||
};
|
||||
|
||||
&peci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
snoop-ports = <0x80>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac2 {
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
use-ncsi;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii3_default>;
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
use-ncsi;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout-64.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
label = "bios";
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
temperature-sensor@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
pca9555_4_20: gpio@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9555_4_22: gpio@22 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9555_4_24: gpio@24 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x24>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names =
|
||||
/*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "",
|
||||
/*A4 - A7 4*/ "", "", "", "",
|
||||
/*B0 - B7 8*/ "", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
pca9555_4_26: gpio@26 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x26>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9546";
|
||||
status = "okay";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel_1: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
channel_2: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
channel_3: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_4: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
pca9555_5_24: gpio@24 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x24>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9546";
|
||||
status = "okay";
|
||||
reg = <0x70 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel_5: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
pca9555_5_5_20: gpio@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "SYS_FAN6", "SYS_FAN5",
|
||||
"SYS_FAN4", "SYS_FAN3",
|
||||
"SYS_FAN2", "SYS_FAN1";
|
||||
};
|
||||
|
||||
pca9555_5_5_21: gpio@21 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
power-monitor@44 {
|
||||
compatible = "ti,ina219";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
channel_6: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
channel_7: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_8: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
pca9555_6_27: gpio@27 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x27>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9555_6_20: gpio@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names =
|
||||
/*A0 0*/ "", "", "", "", "", "", "", "",
|
||||
/*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "",
|
||||
/*B4 12*/ "", "", "", "";
|
||||
};
|
||||
|
||||
pca9555_6_21: gpio@21 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9546";
|
||||
status = "okay";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
idle-state = <1>;
|
||||
|
||||
channel_9: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
temperature-sensor@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
temperature-sensor@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
power-monitor@40 {
|
||||
compatible = "ti,ina219";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <2>;
|
||||
};
|
||||
|
||||
power-monitor@41 {
|
||||
compatible = "ti,ina219";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <5>;
|
||||
};
|
||||
};
|
||||
|
||||
channel_10: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
channel_11: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_12: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c-mux@71 {
|
||||
compatible = "nxp,pca9546";
|
||||
status = "okay";
|
||||
reg = <0x71>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
channel_13: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
channel_14: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
channel_15: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_16: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9546";
|
||||
status = "okay";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
channel_17: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
channel_18: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
temperature-sensor@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
power-monitor@41 {
|
||||
compatible = "ti,ina219";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <5>;
|
||||
};
|
||||
};
|
||||
|
||||
channel_19: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_20: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c14 {
|
||||
status = "okay";
|
||||
multi-master;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
eeprom@51 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&sgpiom0 {
|
||||
status = "okay";
|
||||
ngpios = <128>;
|
||||
};
|
||||
|
||||
&video {
|
||||
status = "okay";
|
||||
memory-region = <&video_engine_memory>;
|
||||
};
|
||||
|
||||
&sdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&kcs1 {
|
||||
aspeed,lpc-io-reg = <0xca0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&kcs2 {
|
||||
aspeed,lpc-io-reg = <0xca8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&kcs3 {
|
||||
aspeed,lpc-io-reg = <0xca2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_routing {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/*A0 0*/ "", "", "", "", "", "", "", "",
|
||||
/*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "",
|
||||
/*C0 16*/ "", "", "", "", "", "", "", "",
|
||||
/*D0 24*/ "", "", "", "", "", "", "", "",
|
||||
/*E0 32*/ "", "", "", "", "", "", "", "",
|
||||
/*F0 40*/ "", "", "", "", "", "", "", "",
|
||||
/*G0 48*/ "", "", "", "", "", "", "", "",
|
||||
/*H0 56*/ "", "", "", "", "", "", "", "",
|
||||
/*I0 64*/ "", "", "", "", "", "", "", "",
|
||||
/*J0 72*/ "", "", "", "", "", "", "", "",
|
||||
/*K0 80*/ "", "", "", "", "", "", "", "",
|
||||
/*L0 88*/ "", "", "", "", "", "", "", "",
|
||||
/*M0 96*/ "", "", "", "", "", "", "", "",
|
||||
/*N0 104*/ "", "", "", "",
|
||||
/*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
|
||||
/*O0 112*/ "", "", "", "", "", "", "", "",
|
||||
/*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
|
||||
/*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
|
||||
/*Q0 128*/ "", "", "", "", "", "", "", "",
|
||||
/*R0 136*/ "", "", "", "", "", "", "", "",
|
||||
/*S0 144*/ "", "", "", "", "", "", "", "",
|
||||
/*T0 152*/ "", "", "", "", "", "", "", "",
|
||||
/*U0 160*/ "", "", "", "", "", "", "", "",
|
||||
/*V0 168*/ "", "", "", "", "", "", "", "",
|
||||
/*W0 176*/ "", "", "", "", "", "", "", "",
|
||||
/*X0 184*/ "", "", "", "", "", "", "", "",
|
||||
/*Y0 192*/ "", "", "", "", "", "", "", "",
|
||||
/*Z0 200*/ "", "", "", "", "", "", "", "";
|
||||
};
|
||||
@ -18,7 +18,7 @@ efuse@##hexaddr { \
|
||||
reg = <0x##hexaddr>; \
|
||||
shunt-resistor-micro-ohms = <675>; \
|
||||
regulators { \
|
||||
efuse##num: vout0 { \
|
||||
efuse##num: vout { \
|
||||
regulator-name = __stringify(efuse##num##-reg); \
|
||||
}; \
|
||||
}; \
|
||||
|
||||
@ -1,544 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2020 Facebook Inc.
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "ast2600-facebook-netbmc-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Facebook Cloudripper BMC";
|
||||
compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
/*
|
||||
* PCA9548 (1-0070) provides 8 channels connecting to
|
||||
* SMB (Switch Main Board).
|
||||
*/
|
||||
i2c16 = &imux16;
|
||||
i2c17 = &imux17;
|
||||
i2c18 = &imux18;
|
||||
i2c19 = &imux19;
|
||||
i2c20 = &imux20;
|
||||
i2c21 = &imux21;
|
||||
i2c22 = &imux22;
|
||||
i2c23 = &imux23;
|
||||
|
||||
/*
|
||||
* PCA9548 (2-0070) provides 8 channels connecting to
|
||||
* SCM (System Controller Module).
|
||||
*/
|
||||
i2c24 = &imux24;
|
||||
i2c25 = &imux25;
|
||||
i2c26 = &imux26;
|
||||
i2c27 = &imux27;
|
||||
i2c28 = &imux28;
|
||||
i2c29 = &imux29;
|
||||
i2c30 = &imux30;
|
||||
i2c31 = &imux31;
|
||||
|
||||
/*
|
||||
* PCA9548 (3-0070) provides 8 channels connecting to
|
||||
* SMB (Switch Main Board).
|
||||
*/
|
||||
i2c32 = &imux32;
|
||||
i2c33 = &imux33;
|
||||
i2c34 = &imux34;
|
||||
i2c35 = &imux35;
|
||||
i2c36 = &imux36;
|
||||
i2c37 = &imux37;
|
||||
i2c38 = &imux38;
|
||||
i2c39 = &imux39;
|
||||
|
||||
/*
|
||||
* PCA9548 (8-0070) provides 8 channels connecting to
|
||||
* PDB (Power Delivery Board).
|
||||
*/
|
||||
i2c40 = &imux40;
|
||||
i2c41 = &imux41;
|
||||
i2c42 = &imux42;
|
||||
i2c43 = &imux43;
|
||||
i2c44 = &imux44;
|
||||
i2c45 = &imux45;
|
||||
i2c46 = &imux46;
|
||||
i2c47 = &imux47;
|
||||
|
||||
/*
|
||||
* PCA9548 (15-0076) provides 8 channels connecting to
|
||||
* FCM (Fan Controller Module).
|
||||
*/
|
||||
i2c48 = &imux48;
|
||||
i2c49 = &imux49;
|
||||
i2c50 = &imux50;
|
||||
i2c51 = &imux51;
|
||||
i2c52 = &imux52;
|
||||
i2c53 = &imux53;
|
||||
i2c54 = &imux54;
|
||||
i2c55 = &imux55;
|
||||
};
|
||||
|
||||
spi_gpio: spi {
|
||||
num-chipselects = <2>;
|
||||
cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
|
||||
<&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
|
||||
|
||||
eeprom@1 {
|
||||
compatible = "atmel,at93c46d";
|
||||
spi-max-frequency = <250000>;
|
||||
data-size = <16>;
|
||||
spi-cs-high;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* "mdio1" is connected to the MDC/MDIO interface of the on-board
|
||||
* management switch (whose ports are connected to BMC, Host and front
|
||||
* panel ethernet port).
|
||||
*/
|
||||
&mdio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio3 {
|
||||
status = "okay";
|
||||
|
||||
ethphy1: ethernet-phy@13 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0d>;
|
||||
};
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <ðphy1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii4_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
multi-master;
|
||||
bus-frequency = <1000000>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
/*
|
||||
* PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
|
||||
* Main Board).
|
||||
*/
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux16: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux17: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux18: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux19: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux20: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux21: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux22: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux23: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
/*
|
||||
* PCA9548 (2-0070) provides 8 channels connecting to SCM (System
|
||||
* Controller Module).
|
||||
*/
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux24: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux25: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux26: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux27: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux28: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux29: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux30: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux31: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
/*
|
||||
* PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
|
||||
* Main Board).
|
||||
*/
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux32: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux33: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux34: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux35: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux36: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux37: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux38: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux39: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
lp5012@14 {
|
||||
compatible = "ti,lp5012";
|
||||
reg = <0x14>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
multi-led@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_MULTI>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
label = "sys";
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
|
||||
multi-led@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_MULTI>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
label = "fan";
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
|
||||
multi-led@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_MULTI>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
label = "psu";
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
|
||||
multi-led@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
color = <LED_COLOR_ID_MULTI>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
label = "scm";
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
/*
|
||||
* PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
|
||||
* Delivery Board).
|
||||
*/
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux40: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux41: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux42: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux43: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux44: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux45: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux46: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux47: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&i2c15 {
|
||||
/*
|
||||
* PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
|
||||
* Controller Module).
|
||||
*/
|
||||
i2c-mux@76 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x76>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux48: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux49: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux50: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux51: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux52: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux53: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux54: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux55: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -66,7 +66,7 @@ &mac3 {
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
no-hw-checksum;
|
||||
use-ncsi;
|
||||
mlx,multi-host;
|
||||
mellanox,multi-host;
|
||||
ncsi-ctrl,start-redo-probe;
|
||||
ncsi-ctrl,no-channel-monitor;
|
||||
ncsi-package = <1>;
|
||||
@ -211,7 +211,6 @@ &i2c13 {
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
ref_voltage = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
@ -220,7 +219,6 @@ &pinctrl_adc4_default &pinctrl_adc5_default
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
ref_voltage = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
|
||||
&pinctrl_adc11_default &pinctrl_adc12_default
|
||||
|
||||
648
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
Normal file
648
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
Normal file
@ -0,0 +1,648 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
// Copyright 2023 Facebook Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "aspeed-g6.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
|
||||
/ {
|
||||
model = "Facebook Harma";
|
||||
compatible = "facebook,harma-bmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart4;
|
||||
serial4 = &uart5;
|
||||
|
||||
i2c20 = &imux20;
|
||||
i2c21 = &imux21;
|
||||
i2c22 = &imux22;
|
||||
i2c23 = &imux23;
|
||||
i2c24 = &imux24;
|
||||
i2c25 = &imux25;
|
||||
i2c26 = &imux26;
|
||||
i2c27 = &imux27;
|
||||
i2c28 = &imux28;
|
||||
i2c29 = &imux29;
|
||||
i2c30 = &imux30;
|
||||
i2c31 = &imux31;
|
||||
|
||||
spi1 = &spi_gpio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x80000000>;
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
|
||||
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
|
||||
<&adc1 2>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "bmc_heartbeat_amber";
|
||||
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "fp_id_amber";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
label = "power_blue";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
spi_gpio: spi-gpio {
|
||||
status = "okay";
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
|
||||
gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
|
||||
gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
|
||||
|
||||
tpmdev@0 {
|
||||
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
|
||||
spi-max-frequency = <33000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// HOST BIOS Debug
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// SOL Host Console
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <>;
|
||||
};
|
||||
|
||||
// SOL BMC Console
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <>;
|
||||
};
|
||||
|
||||
// BMC Debug Console
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// MTIA
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_routing {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
||||
aspeed,reset-type = "soc";
|
||||
aspeed,external-signal;
|
||||
aspeed,ext-push-pull;
|
||||
aspeed,ext-active-high;
|
||||
aspeed,ext-pulse-duration = <256>;
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
use-ncsi;
|
||||
mellanox,multi-host;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout-128.dtsi"
|
||||
};
|
||||
|
||||
flash@1 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "alt-bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
// BIOS Flash
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi2_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
spi-max-frequency = <12000000>;
|
||||
spi-tx-bus-width = <2>;
|
||||
spi-rx-bus-width = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&kcs2 {
|
||||
status = "okay";
|
||||
aspeed,lpc-io-reg = <0xca8>;
|
||||
};
|
||||
|
||||
&kcs3 {
|
||||
status = "okay";
|
||||
aspeed,lpc-io-reg = <0xca2>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@4b {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x4b>;
|
||||
};
|
||||
|
||||
// MB NIC FRU
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9543";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
imux20: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
//Retimer Flash
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c2048";
|
||||
reg = <0x50>;
|
||||
pagesize = <128>;
|
||||
};
|
||||
};
|
||||
imux21: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
retimer@24 {
|
||||
compatible = "asteralabs,pt5161l";
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
// PDB FRU
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x52>;
|
||||
};
|
||||
|
||||
power-monitor@69 {
|
||||
compatible = "pmbus";
|
||||
reg = <0x69>;
|
||||
};
|
||||
|
||||
temperature-sensor@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
power-monitor@22 {
|
||||
compatible = "lltc,ltc4286";
|
||||
reg = <0x22>;
|
||||
adi,vrange-low-enable;
|
||||
shunt-resistor-micro-ohms = <500>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9543";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
imux22: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
imux23: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
|
||||
gpio@30 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x30>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
gpio@31 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x31>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"","","","",
|
||||
"","","presence-cmm","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
i2c-mux@71 {
|
||||
compatible = "nxp,pca9546";
|
||||
reg = <0x71>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
imux24: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
imux25: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
imux26: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
imux27: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
// PTTV FRU
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x52>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
retimer@24 {
|
||||
compatible = "asteralabs,pt5161l";
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
imux28: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
imux29: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
//MB FRU
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
imux30: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
imux31: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// To Debug card
|
||||
&i2c14 {
|
||||
status = "okay";
|
||||
multi-master;
|
||||
|
||||
ipmb@10 {
|
||||
compatible = "ipmb-dev";
|
||||
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
|
||||
i2c-protocol;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c15 {
|
||||
status = "okay";
|
||||
|
||||
// SCM FRU
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
// BSM FRU
|
||||
eeprom@56 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x56>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
&pinctrl_adc4_default &pinctrl_adc5_default
|
||||
&pinctrl_adc6_default &pinctrl_adc7_default>;
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc10_default>;
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
pinctrl-names = "default";
|
||||
gpio-line-names =
|
||||
/*A0-A7*/ "","","","","","","","",
|
||||
/*B0-B7*/ "","","","",
|
||||
"bmc-spi-mux-select-0","led-identify","","",
|
||||
/*C0-C7*/ "reset-cause-platrst","","","","",
|
||||
"cpu0-err-alert","","",
|
||||
/*D0-D7*/ "","","sol-uart-select","","","","","",
|
||||
/*E0-E7*/ "","","","","","","","",
|
||||
/*F0-F7*/ "","","","","","","","",
|
||||
/*G0-G7*/ "","","","","","","","",
|
||||
/*H0-H7*/ "","","","","","","","",
|
||||
/*I0-I7*/ "","","","","","","","",
|
||||
/*J0-J7*/ "","","","","","","","",
|
||||
/*K0-K7*/ "","","","","","","","",
|
||||
/*L0-L7*/ "","","","",
|
||||
"leakage-detect-alert","","","",
|
||||
/*M0-M7*/ "","","","","","","","",
|
||||
/*N0-N7*/ "led-postcode-0","led-postcode-1",
|
||||
"led-postcode-2","led-postcode-3",
|
||||
"led-postcode-4","led-postcode-5",
|
||||
"led-postcode-6","led-postcode-7",
|
||||
/*O0-O7*/ "","","","","","","","",
|
||||
/*P0-P7*/ "power-button","power-host-control",
|
||||
"reset-button","","led-power","","","",
|
||||
/*Q0-Q7*/ "","","","","","","","",
|
||||
/*R0-R7*/ "","","","","","","","",
|
||||
/*S0-S7*/ "","","","","","","","",
|
||||
/*T0-T7*/ "","","","","","","","",
|
||||
/*U0-U7*/ "","","","","","","led-identify-gate","",
|
||||
/*V0-V7*/ "","","","",
|
||||
"rtc-battery-voltage-read-enable","","","",
|
||||
/*W0-W7*/ "","","","","","","","",
|
||||
/*X0-X7*/ "","","","","","","","",
|
||||
/*Y0-Y7*/ "","","","","","","","",
|
||||
/*Z0-Z7*/ "","","","","","","presence-post-card","";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/*18A0-18A7*/ "ac-power-button","","","","","","","",
|
||||
/*18B0-18B7*/ "","","","","","","","",
|
||||
/*18C0-18C7*/ "","","","","","","","",
|
||||
/*18D0-18D7*/ "","","","","","","","",
|
||||
/*18E0-18E3*/ "","","","","","","","";
|
||||
};
|
||||
|
||||
&sgpiom0 {
|
||||
status = "okay";
|
||||
max-ngpios = <128>;
|
||||
ngpios = <128>;
|
||||
bus-frequency = <2000000>;
|
||||
gpio-line-names =
|
||||
/*in - out - in - out */
|
||||
/*A0-A3 line 0-7*/
|
||||
"presence-scm-cable","power-config-disable-e1s-0",
|
||||
"","",
|
||||
"","power-config-disable-e1s-1",
|
||||
"","",
|
||||
/*A4-A7 line 8-15*/
|
||||
"","power-config-asic-module-enable",
|
||||
"","power-config-asic-power-good",
|
||||
"","power-config-pdb-power-good",
|
||||
"presence-cpu","smi-control-n",
|
||||
/*B0-B3 line 16-23*/
|
||||
"","nmi-control-n",
|
||||
"","nmi-control-sync-flood-n",
|
||||
"","",
|
||||
"","",
|
||||
/*B4-B7 line 24-31*/
|
||||
"","FM_CPU_SP5R1",
|
||||
"reset-cause-rsmrst","FM_CPU_SP5R2",
|
||||
"","FM_CPU_SP5R3",
|
||||
"","FM_CPU_SP5R4",
|
||||
/*C0-C3 line 32-39*/
|
||||
"","FM_CPU0_SA0",
|
||||
"","FM_CPU0_SA1",
|
||||
"","rt-cpu0-p0-enable",
|
||||
"","rt-cpu0-p1-enable",
|
||||
/*C4-C7 line 40-47*/
|
||||
"","smb-rt-rom-p0-select",
|
||||
"","smb-rt-rom-p1-select",
|
||||
"","i3c-cpu-mux0-oe-n",
|
||||
"","i3c-cpu-mux0-select",
|
||||
/*D0-D3 line 48-55*/
|
||||
"","i3c-cpu-mux1-oe-n",
|
||||
"","i3c-cpu-mux1-select",
|
||||
"","reset-control-bmc",
|
||||
"","reset-control-cpu0-p0-mux",
|
||||
/*D4-D7 line 56-63*/
|
||||
"","reset-control-cpu0-p1-mux",
|
||||
"","reset-control-e1s-mux",
|
||||
"power-host-good","reset-control-mb-mux",
|
||||
"host0-ready","reset-control-smb-e1s-0",
|
||||
/*E0-E3 line 64-71*/
|
||||
"","reset-control-smb-e1s-1",
|
||||
"post-end-n","reset-control-srst",
|
||||
"presence-e1s-0","reset-control-usb-hub",
|
||||
"","reset-control",
|
||||
/*E4-E7 line 72-79*/
|
||||
"presence-e1s-1","reset-control-cpu-kbrst",
|
||||
"","reset-control-platrst",
|
||||
"","bmc-jtag-mux-select-0",
|
||||
"","bmc-jtag-mux-select-1",
|
||||
/*F0-F3 line 80-87*/
|
||||
"","bmc-jtag-select",
|
||||
"","bmc-ready-n",
|
||||
"","bmc-ready-sgpio",
|
||||
"","rt-cpu0-p0-force-enable",
|
||||
/*F4-F7 line 88-95*/
|
||||
"presence-asic-modules-0","rt-cpu0-p1-force-enable",
|
||||
"presence-asic-modules-1","bios-debug-msg-disable",
|
||||
"","uart-control-buffer-select",
|
||||
"","ac-control-n",
|
||||
/*G0-G3 line 96-103*/
|
||||
"FM_CPU_CORETYPE2","",
|
||||
"FM_CPU_CORETYPE1","",
|
||||
"FM_CPU_CORETYPE0","",
|
||||
"FM_BOARD_REV_ID5","",
|
||||
/*G4-G7 line 104-111*/
|
||||
"FM_BOARD_REV_ID4","",
|
||||
"FM_BOARD_REV_ID3","",
|
||||
"FM_BOARD_REV_ID2","",
|
||||
"FM_BOARD_REV_ID1","",
|
||||
/*H0-H3 line 112-119*/
|
||||
"FM_BOARD_REV_ID0","",
|
||||
"","","","","","",
|
||||
/*H4-H7 line 120-127*/
|
||||
"","",
|
||||
"reset-control-pcie-expansion-3","",
|
||||
"reset-control-pcie-expansion-2","",
|
||||
"reset-control-pcie-expansion-1","",
|
||||
/*I0-I3 line 128-135*/
|
||||
"reset-control-pcie-expansion-0","",
|
||||
"FM_EXP_SLOT_ID1","",
|
||||
"FM_EXP_SLOT_ID0","",
|
||||
"","",
|
||||
/*I4-I7 line 136-143*/
|
||||
"","","","","","","","",
|
||||
/*J0-J3 line 144-151*/
|
||||
"","","","","","","","",
|
||||
/*J4-J7 line 152-159*/
|
||||
"SLOT_ID_BCB_0","",
|
||||
"SLOT_ID_BCB_1","",
|
||||
"SLOT_ID_BCB_2","",
|
||||
"SLOT_ID_BCB_3","",
|
||||
/*K0-K3 line 160-167*/
|
||||
"","","","","","","P0_I3C_APML_ALERT_L","",
|
||||
/*K4-K7 line 168-175*/
|
||||
"","","","","","","irq-uv-detect-alert","",
|
||||
/*L0-L3 line 176-183*/
|
||||
"irq-hsc-alert","",
|
||||
"cpu0-prochot-alert","",
|
||||
"cpu0-thermtrip-alert","",
|
||||
"reset-cause-pcie","",
|
||||
/*L4-L7 line 184-191*/
|
||||
"pvdd11-ocp-alert","","","","","","","",
|
||||
/*M0-M3 line 192-199*/
|
||||
"","","","","","","","",
|
||||
/*M4-M7 line 200-207*/
|
||||
"","","","","","","","",
|
||||
/*N0-N3 line 208-215*/
|
||||
"","","","","","","","",
|
||||
/*N4-N7 line 216-223*/
|
||||
"","","","","","","","",
|
||||
/*O0-O3 line 224-231*/
|
||||
"","","","","","","","",
|
||||
/*O4-O7 line 232-239*/
|
||||
"","","","","","","","",
|
||||
/*P0-P3 line 240-247*/
|
||||
"","","","","","","","",
|
||||
/*P4-P7 line 248-255*/
|
||||
"","","","","","","","";
|
||||
};
|
||||
@ -1,265 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2023 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g6.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
|
||||
/ {
|
||||
model = "Facebook Minerva CMC";
|
||||
compatible = "facebook,minerva-cmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial5 = &uart5;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial5:57600n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x80000000>;
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
|
||||
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
|
||||
<&adc1 2>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
||||
aspeed,reset-type = "soc";
|
||||
aspeed,external-signal;
|
||||
aspeed,ext-push-pull;
|
||||
aspeed,ext-active-high;
|
||||
aspeed,ext-pulse-duration = <256>;
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
use-ncsi;
|
||||
mlx,multi-host;
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout-128.dtsi"
|
||||
};
|
||||
flash@1 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "alt-bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sgpiom1 {
|
||||
status = "okay";
|
||||
ngpios = <128>;
|
||||
bus-frequency = <2000000>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@4b {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x4B>;
|
||||
};
|
||||
|
||||
eeprom@51 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@77 {
|
||||
compatible = "nxp,pca9548";
|
||||
reg = <0x77>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c14 {
|
||||
status = "okay";
|
||||
multi-master;
|
||||
|
||||
ipmb@10 {
|
||||
compatible = "ipmb-dev";
|
||||
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
|
||||
i2c-protocol;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c15 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
&pinctrl_adc4_default &pinctrl_adc5_default
|
||||
&pinctrl_adc6_default &pinctrl_adc7_default>;
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc10_default>;
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
};
|
||||
543
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
Normal file
543
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
Normal file
@ -0,0 +1,543 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2023 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g6.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/i2c/i2c.h>
|
||||
|
||||
/ {
|
||||
model = "Facebook Minerva CMM";
|
||||
compatible = "facebook,minerva-cmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial5 = &uart5;
|
||||
/*
|
||||
* PCA9548 (2-0077) provides 8 channels connecting to
|
||||
* 6 pcs of FCB (Fan Controller Board).
|
||||
*/
|
||||
i2c16 = &imux16;
|
||||
i2c17 = &imux17;
|
||||
i2c18 = &imux18;
|
||||
i2c19 = &imux19;
|
||||
i2c20 = &imux20;
|
||||
i2c21 = &imux21;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial5:57600n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x80000000>;
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
|
||||
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
|
||||
<&adc1 2>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-fan-fault {
|
||||
label = "led-fan-fault";
|
||||
gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
||||
aspeed,reset-type = "soc";
|
||||
aspeed,external-signal;
|
||||
aspeed,ext-push-pull;
|
||||
aspeed,ext-active-high;
|
||||
aspeed,ext-pulse-duration = <256>;
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
fixed-link {
|
||||
speed = <100>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout-128.dtsi"
|
||||
};
|
||||
flash@1 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "alt-bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sgpiom0 {
|
||||
status = "okay";
|
||||
ngpios = <128>;
|
||||
bus-frequency = <2000000>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
power-monitor@40 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
|
||||
power-monitor@41 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
|
||||
power-monitor@67 {
|
||||
compatible = "adi,ltc2945";
|
||||
reg = <0x67>;
|
||||
};
|
||||
|
||||
power-monitor@68 {
|
||||
compatible = "adi,ltc2945";
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
leds_gpio: gpio@19 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x19>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@4b {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x4b>;
|
||||
};
|
||||
|
||||
temperature-sensor@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@77 {
|
||||
compatible = "nxp,pca9548";
|
||||
reg = <0x77>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-mux-idle-disconnect;
|
||||
|
||||
imux16: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
imux17: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
imux18: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
imux19: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
imux20: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
imux21: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pwm@5e{
|
||||
compatible = "max31790";
|
||||
reg = <0x5e>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c14 {
|
||||
status = "okay";
|
||||
multi-master;
|
||||
|
||||
ipmb@10 {
|
||||
compatible = "ipmb-dev";
|
||||
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
|
||||
i2c-protocol;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c15 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
&pinctrl_adc4_default &pinctrl_adc5_default
|
||||
&pinctrl_adc6_default &pinctrl_adc7_default>;
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
aspeed,int-vref-microvolt = <2500000>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc10_default>;
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/*A0-A7*/ "","","","","","","","",
|
||||
/*B0-B7*/ "","","","","","","","",
|
||||
/*C0-C7*/ "","","","","BLADE_UART_SEL2","","","",
|
||||
/*D0-D7*/ "","","","","","","","",
|
||||
/*E0-E7*/ "","","","","","","","",
|
||||
/*F0-F7*/ "","","","","","","","",
|
||||
/*G0-G7*/ "","","","","","","","",
|
||||
/*H0-H7*/ "","","","","","","","",
|
||||
/*I0-I7*/ "","","","","","","","",
|
||||
/*J0-J7*/ "","","","","","","","",
|
||||
/*K0-K7*/ "","","","","","","","",
|
||||
/*L0-L7*/ "","","","","BLADE_UART_SEL0","","","",
|
||||
/*M0-M7*/ "","","","","","BLADE_UART_SEL1","","",
|
||||
/*N0-N7*/ "","","","","","","","",
|
||||
/*O0-O7*/ "","","","","","","","",
|
||||
/*P0-P7*/ "","","","","","","","",
|
||||
/*Q0-Q7*/ "","","","","","","","",
|
||||
/*R0-R7*/ "","","","","","","","",
|
||||
/*S0-S7*/ "","","","","","","","",
|
||||
/*T0-T7*/ "","","","","","","","",
|
||||
/*U0-U7*/ "","","","","","","","",
|
||||
/*V0-V7*/ "","","","","BAT_DETECT","","","",
|
||||
/*W0-W7*/ "","","","","","","","",
|
||||
/*X0-X7*/ "","","BLADE_UART_SEL3","","","","","",
|
||||
/*Y0-Y7*/ "","","","","","","","",
|
||||
/*Z0-Z7*/ "","","","","","","","";
|
||||
};
|
||||
|
||||
&sgpiom0 {
|
||||
gpio-line-names =
|
||||
/*"input pin","output pin"*/
|
||||
/*A0 - A7*/
|
||||
"PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN",
|
||||
"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN",
|
||||
"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN",
|
||||
"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN",
|
||||
"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN",
|
||||
"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN",
|
||||
"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN",
|
||||
"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN",
|
||||
/*B0 - B7*/
|
||||
"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN",
|
||||
"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN",
|
||||
"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN",
|
||||
"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN",
|
||||
"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN",
|
||||
"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN",
|
||||
"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN",
|
||||
"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN",
|
||||
/*C0 - C7*/
|
||||
"PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN",
|
||||
"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN",
|
||||
"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN",
|
||||
"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN",
|
||||
"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN",
|
||||
"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN",
|
||||
"PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN",
|
||||
"PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN",
|
||||
/*D0 - D7*/
|
||||
"PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN",
|
||||
"PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN",
|
||||
"PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN",
|
||||
"PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN",
|
||||
/*E0 - E7*/
|
||||
"PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN",
|
||||
/*F0 - F7*/
|
||||
"PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN",
|
||||
"PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN",
|
||||
"PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN",
|
||||
"PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN",
|
||||
"PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN",
|
||||
"PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN",
|
||||
/*G0 - G7*/
|
||||
"PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN",
|
||||
"PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN",
|
||||
"PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N",
|
||||
"PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS",
|
||||
"PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","",
|
||||
"PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N",
|
||||
"PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N",
|
||||
"PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N",
|
||||
/*H0 - H7*/
|
||||
"LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N",
|
||||
"LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N",
|
||||
"LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N",
|
||||
"LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N",
|
||||
"LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N",
|
||||
"LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N",
|
||||
"LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N",
|
||||
"LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N",
|
||||
/*I0 - I7*/
|
||||
"LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N",
|
||||
"LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N",
|
||||
"LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N",
|
||||
"LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N",
|
||||
"LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N",
|
||||
"LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N",
|
||||
"LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY",
|
||||
"LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N",
|
||||
/*J0 - J7*/
|
||||
"LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N",
|
||||
"LEAK_DETECT_NW_BLADE1_N_BUF","",
|
||||
"LEAK_DETECT_NW_BLADE2_N_BUF","",
|
||||
"LEAK_DETECT_NW_BLADE3_N_BUF","",
|
||||
"LEAK_DETECT_NW_BLADE4_N_BUF","",
|
||||
"LEAK_DETECT_NW_BLADE5_N_BUF","",
|
||||
"MTIA_BLADE0_STATUS_LED","",
|
||||
"MTIA_BLADE1_STATUS_LED","",
|
||||
/*K0 - K7*/
|
||||
"MTIA_BLADE2_STATUS_LED","",
|
||||
"MTIA_BLADE3_STATUS_LED","",
|
||||
"MTIA_BLADE4_STATUS_LED","",
|
||||
"MTIA_BLADE5_STATUS_LED","",
|
||||
"MTIA_BLADE6_STATUS_LED","",
|
||||
"MTIA_BLADE7_STATUS_LED","",
|
||||
"MTIA_BLADE8_STATUS_LED","",
|
||||
"MTIA_BLADE9_STATUS_LED","",
|
||||
/*L0 - L7*/
|
||||
"MTIA_BLADE10_STATUS_LED","",
|
||||
"MTIA_BLADE11_STATUS_LED","",
|
||||
"MTIA_BLADE12_STATUS_LED","",
|
||||
"MTIA_BLADE13_STATUS_LED","",
|
||||
"MTIA_BLADE14_STATUS_LED","",
|
||||
"MTIA_BLADE15_STATUS_LED","",
|
||||
"NW_BLADE0_STATUS_LED","",
|
||||
"NW_BLADE1_STATUS_LED","",
|
||||
/*M0 - M7*/
|
||||
"NW_BLADE2_STATUS_LED","",
|
||||
"NW_BLADE3_STATUS_LED","",
|
||||
"NW_BLADE4_STATUS_LED","",
|
||||
"NW_BLADE5_STATUS_LED","",
|
||||
"RPU_READY","",
|
||||
"IT_GEAR_RPU_LINK_N","",
|
||||
"IT_GEAR_LEAK","",
|
||||
"WATER_VALVE_CLOSED_N","",
|
||||
/*N0 - N7*/
|
||||
"VALVE_STS0","",
|
||||
"VALVE_STS1","",
|
||||
"VALVE_STS2","",
|
||||
"VALVE_STS3","",
|
||||
"CR_TOGGLE_BOOT_BUF_N","",
|
||||
"CMM_LC_RDY_LED_N","",
|
||||
"CMM_LC_UNRDY_LED_N","",
|
||||
"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
|
||||
/*O0 - O7*/
|
||||
"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
|
||||
"BOT_BCB_CABLE_PRSNT_N","",
|
||||
"TOP_BCB_CABLE_PRSNT_N","",
|
||||
"CHASSIS0_LEAK_Q_N","",
|
||||
"CHASSIS1_LEAK_Q_N","",
|
||||
"LEAK0_DETECT","",
|
||||
"LEAK1_DETECT","",
|
||||
"MGMT_SFP_PRSNT_N","",
|
||||
/*P0 - P7*/
|
||||
"MGMT_SFP_TX_FAULT","",
|
||||
"MGMT_SFP_RX_LOS","",
|
||||
"","",
|
||||
"","",
|
||||
"","",
|
||||
"","",
|
||||
"","",
|
||||
"","";
|
||||
};
|
||||
@ -88,7 +88,7 @@ &mac2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii3_default>;
|
||||
use-ncsi;
|
||||
mlx,multi-host;
|
||||
mellanox,multi-host;
|
||||
};
|
||||
|
||||
&mac3 {
|
||||
@ -96,7 +96,7 @@ &mac3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii4_default>;
|
||||
use-ncsi;
|
||||
mlx,multi-host;
|
||||
mellanox,multi-host;
|
||||
};
|
||||
|
||||
&fmc {
|
||||
@ -369,7 +369,14 @@ rtc@6f {
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
bus-frequency = <400000>;
|
||||
bus-frequency = <100000>;
|
||||
multi-master;
|
||||
|
||||
ipmb@10 {
|
||||
compatible = "ipmb-dev";
|
||||
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
|
||||
i2c-protocol;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c14 {
|
||||
@ -596,7 +603,6 @@ i2c-mux@72 {
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
ref_voltage = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
@ -605,7 +611,6 @@ &pinctrl_adc4_default &pinctrl_adc5_default
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
ref_voltage = <2500>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
|
||||
};
|
||||
|
||||
@ -95,7 +95,7 @@ &mac0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default>;
|
||||
use-ncsi;
|
||||
mlx,multi-host;
|
||||
mellanox,multi-host;
|
||||
};
|
||||
|
||||
&adc {
|
||||
|
||||
@ -488,7 +488,7 @@ pca9551@60 {
|
||||
#gpio-cells = <2>;
|
||||
|
||||
led@0 {
|
||||
label = "nvme0";
|
||||
label = "nvme3";
|
||||
reg = <0>;
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
@ -496,7 +496,7 @@ led@0 {
|
||||
};
|
||||
|
||||
led@1 {
|
||||
label = "nvme1";
|
||||
label = "nvme2";
|
||||
reg = <1>;
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
@ -504,7 +504,7 @@ led@1 {
|
||||
};
|
||||
|
||||
led@2 {
|
||||
label = "nvme2";
|
||||
label = "nvme1";
|
||||
reg = <2>;
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
@ -512,7 +512,7 @@ led@2 {
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "nvme3";
|
||||
label = "nvme0";
|
||||
reg = <3>;
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
|
||||
1623
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
Normal file
1623
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
Normal file
File diff suppressed because it is too large
Load Diff
@ -867,22 +867,26 @@ i2c: bus@1e78a000 {
|
||||
};
|
||||
|
||||
fsim0: fsi@1e79b000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
|
||||
reg = <0x1e79b000 0x94>;
|
||||
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fsi1_default>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
|
||||
interrupt-controller;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fsim1: fsi@1e79b100 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
|
||||
reg = <0x1e79b100 0x94>;
|
||||
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fsi2_default>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
|
||||
interrupt-controller;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
@ -165,10 +165,12 @@ occ-hwmon {
|
||||
};
|
||||
|
||||
fsi_hub0: hub@3400 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "fsi-master-hub";
|
||||
reg = <0x3400 0x400>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
interrupt-controller;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,4 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
|
||||
@ -16,7 +18,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
|
||||
@ -76,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l-ts050.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
|
||||
@ -86,3 +91,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
|
||||
# Overlays
|
||||
meson-g12a-fbx8am-brcm-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
|
||||
meson-g12a-fbx8am-realtek-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
|
||||
meson-g12b-a311d-khadas-vim3-ts050-dtbs := meson-g12b-a311d-khadas-vim3.dtb meson-khadas-vim3-ts050.dtbo
|
||||
meson-sm1-khadas-vim3l-ts050-dtbs := meson-sm1-khadas-vim3l.dtb meson-khadas-vim3-ts050.dtbo
|
||||
|
||||
42
arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
Normal file
42
arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
Normal file
@ -0,0 +1,42 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "amlogic-a4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Amlogic A113L2 ba400 Development Board";
|
||||
compatible = "amlogic,ba400", "amlogic,a4";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_b;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/* 10 MiB reserved for ARM Trusted Firmware */
|
||||
secmon_reserved: secmon@5000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x05000000 0x0 0xa00000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart_b {
|
||||
status = "okay";
|
||||
};
|
||||
66
arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
Normal file
66
arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
Normal file
@ -0,0 +1,66 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
/ {
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
xtal: xtal-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xtal";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gic: interrupt-controller@fff01000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xfff01000 0 0x1000>,
|
||||
<0x0 0xfff02000 0 0x2000>,
|
||||
<0x0 0xfff04000 0 0x2000>,
|
||||
<0x0 0xfff06000 0 0x2000>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
apb: bus@fe000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xfe000000 0x0 0x480000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
|
||||
|
||||
uart_b: serial@7a000 {
|
||||
compatible = "amlogic,a4-uart",
|
||||
"amlogic,meson-s4-uart";
|
||||
reg = <0x0 0x7a000 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>, <&xtal>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
40
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
Normal file
40
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
Normal file
@ -0,0 +1,40 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "amlogic-a4-common.dtsi"
|
||||
/ {
|
||||
cpus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
};
|
||||
};
|
||||
42
arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
Normal file
42
arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
Normal file
@ -0,0 +1,42 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "amlogic-a5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Amlogic A113X2 av400 Development Board";
|
||||
compatible = "amlogic,av400", "amlogic,a5";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_b;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/* 10 MiB reserved for ARM Trusted Firmware */
|
||||
secmon_reserved: secmon@5000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x05000000 0x0 0xa00000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart_b {
|
||||
status = "okay";
|
||||
};
|
||||
40
arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
Normal file
40
arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
Normal file
@ -0,0 +1,40 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "amlogic-a4-common.dtsi"
|
||||
/ {
|
||||
cpus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu1: cpu@100 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x100>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu2: cpu@200 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x200>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu3: cpu@300 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x300>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
};
|
||||
};
|
||||
197
arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
Normal file
197
arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
Normal file
@ -0,0 +1,197 @@
|
||||
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
|
||||
/*
|
||||
* Copyright (c) 2024 Amlogic, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#ifndef __DTS_AMLOGIC_T7_RESET_H
|
||||
#define __DTS_AMLOGIC_T7_RESET_H
|
||||
|
||||
/* RESET0 */
|
||||
/* 0-3 */
|
||||
#define RESET_USB 4
|
||||
#define RESET_U2DRD 5
|
||||
#define RESET_U3DRD 6
|
||||
#define RESET_U3DRD_PIPE0 7
|
||||
#define RESET_U2PHY20 8
|
||||
#define RESET_U2PHY21 9
|
||||
#define RESET_GDC 10
|
||||
#define RESET_HDMI20_AES 11
|
||||
#define RESET_HDMIRX 12
|
||||
#define RESET_HDMIRX_APB 13
|
||||
#define RESET_DEWARP 14
|
||||
/* 15 */
|
||||
#define RESET_HDMITX_CAPB3 16
|
||||
#define RESET_BRG_VCBUG_DEC 17
|
||||
#define RESET_VCBUS 18
|
||||
#define RESET_VID_PLL_DIV 19
|
||||
#define RESET_VDI6 20
|
||||
#define RESET_GE2D 21
|
||||
#define RESET_HDMITXPHY 22
|
||||
#define RESET_VID_LOCK 23
|
||||
#define RESET_VENC0 24
|
||||
#define RESET_VDAC 25
|
||||
#define RESET_VENC2 26
|
||||
#define RESET_VENC1 27
|
||||
#define RESET_RDMA 28
|
||||
#define RESET_HDMITX 29
|
||||
#define RESET_VIU 30
|
||||
#define RESET_VENC 31
|
||||
|
||||
/* RESET1 */
|
||||
#define RESET_AUDIO 32
|
||||
#define RESET_MALI_CAPB3 33
|
||||
#define RESET_MALI 34
|
||||
#define RESET_DDR_APB 35
|
||||
#define RESET_DDR 36
|
||||
#define RESET_DOS_CAPB3 37
|
||||
#define RESET_DOS 38
|
||||
#define RESET_COMBO_DPHY_CHAN2 39
|
||||
#define RESET_DEBUG_B 40
|
||||
#define RESET_DEBUG_A 41
|
||||
#define RESET_DSP_B 42
|
||||
#define RESET_DSP_A 43
|
||||
#define RESET_PCIE_A 44
|
||||
#define RESET_PCIE_PHY 45
|
||||
#define RESET_PCIE_APB 46
|
||||
#define RESET_ANAKIN 47
|
||||
#define RESET_ETH 48
|
||||
#define RESET_EDP0_CTRL 49
|
||||
#define RESET_EDP1_CTRL 50
|
||||
#define RESET_COMBO_DPHY_CHAN0 51
|
||||
#define RESET_COMBO_DPHY_CHAN1 52
|
||||
#define RESET_DSI_LVDS_EDP_TOP 53
|
||||
#define RESET_PCIE1_PHY 54
|
||||
#define RESET_PCIE1_APB 55
|
||||
#define RESET_DDR_1 56
|
||||
/* 57 */
|
||||
#define RESET_EDP1_PIPELINE 58
|
||||
#define RESET_EDP0_PIPELINE 59
|
||||
#define RESET_MIPI_DSI1_PHY 60
|
||||
#define RESET_MIPI_DSI0_PHY 61
|
||||
#define RESET_MIPI_DSI_A_HOST 62
|
||||
#define RESET_MIPI_DSI_B_HOST 63
|
||||
|
||||
/* RESET2 */
|
||||
#define RESET_DEVICE_MMC_ARB 64
|
||||
#define RESET_IR_CTRL 65
|
||||
#define RESET_TS_A73 66
|
||||
#define RESET_TS_A53 67
|
||||
#define RESET_SPICC_2 68
|
||||
#define RESET_SPICC_3 69
|
||||
#define RESET_SPICC_4 70
|
||||
#define RESET_SPICC_5 71
|
||||
#define RESET_SMART_CARD 72
|
||||
#define RESET_SPICC_0 73
|
||||
#define RESET_SPICC_1 74
|
||||
#define RESET_RSA 75
|
||||
/* 76-79 */
|
||||
#define RESET_MSR_CLK 80
|
||||
#define RESET_SPIFC 81
|
||||
#define RESET_SAR_ADC 82
|
||||
#define RESET_BT 83
|
||||
/* 84-87 */
|
||||
#define RESET_ACODEC 88
|
||||
#define RESET_CEC 89
|
||||
#define RESET_AFIFO 90
|
||||
#define RESET_WATCHDOG 91
|
||||
/* 92-95 */
|
||||
|
||||
/* RESET3 */
|
||||
#define RESET_BRG_NIC1_GPV 96
|
||||
#define RESET_BRG_NIC2_GPV 97
|
||||
#define RESET_BRG_NIC3_GPV 98
|
||||
#define RESET_BRG_NIC4_GPV 99
|
||||
#define RESET_BRG_NIC5_GPV 100
|
||||
/* 101-121 */
|
||||
#define RESET_MIPI_ISP 122
|
||||
#define RESET_BRG_ADB_MALI_1 123
|
||||
#define RESET_BRG_ADB_MALI_0 124
|
||||
#define RESET_BRG_ADB_A73 125
|
||||
#define RESET_BRG_ADB_A53 126
|
||||
#define RESET_BRG_CCI 127
|
||||
|
||||
/* RESET4 */
|
||||
#define RESET_PWM_AO_AB 128
|
||||
#define RESET_PWM_AO_CD 129
|
||||
#define RESET_PWM_AO_EF 130
|
||||
#define RESET_PWM_AO_GH 131
|
||||
#define RESET_PWM_AB 132
|
||||
#define RESET_PWM_CD 133
|
||||
#define RESET_PWM_EF 134
|
||||
/* 135-137 */
|
||||
#define RESET_UART_A 138
|
||||
#define RESET_UART_B 139
|
||||
#define RESET_UART_C 140
|
||||
#define RESET_UART_D 141
|
||||
#define RESET_UART_E 142
|
||||
#define RESET_UART_F 143
|
||||
#define RESET_I2C_S_A 144
|
||||
#define RESET_I2C_M_A 145
|
||||
#define RESET_I2C_M_B 146
|
||||
#define RESET_I2C_M_C 147
|
||||
#define RESET_I2C_M_D 148
|
||||
#define RESET_I2C_M_E 149
|
||||
#define RESET_I2C_M_F 150
|
||||
#define RESET_I2C_M_AO_A 151
|
||||
#define RESET_SD_EMMC_A 152
|
||||
#define RESET_SD_EMMC_B 153
|
||||
#define RESET_SD_EMMC_C 154
|
||||
#define RESET_I2C_M_AO_B 155
|
||||
#define RESET_TS_GPU 156
|
||||
#define RESET_TS_NNA 157
|
||||
#define RESET_TS_VPN 158
|
||||
#define RESET_TS_HEVC 159
|
||||
|
||||
/* RESET5 */
|
||||
#define RESET_BRG_NOC_DDR_1 160
|
||||
#define RESET_BRG_NOC_DDR_0 161
|
||||
#define RESET_BRG_NOC_MAIN 162
|
||||
#define RESET_BRG_NOC_ALL 163
|
||||
/* 164-167 */
|
||||
#define RESET_BRG_NIC2_SYS 168
|
||||
#define RESET_BRG_NIC2_MAIN 169
|
||||
#define RESET_BRG_NIC2_HDMI 170
|
||||
#define RESET_BRG_NIC2_ALL 171
|
||||
#define RESET_BRG_NIC3_WAVE 172
|
||||
#define RESET_BRG_NIC3_VDEC 173
|
||||
#define RESET_BRG_NIC3_HEVCF 174
|
||||
#define RESET_BRG_NIC3_HEVCB 175
|
||||
#define RESET_BRG_NIC3_HCODEC 176
|
||||
#define RESET_BRG_NIC3_GE2D 177
|
||||
#define RESET_BRG_NIC3_GDC 178
|
||||
#define RESET_BRG_NIC3_AMLOGIC 179
|
||||
#define RESET_BRG_NIC3_MAIN 180
|
||||
#define RESET_BRG_NIC3_ALL 181
|
||||
#define RESET_BRG_NIC5_VPU 182
|
||||
/* 183-185 */
|
||||
#define RESET_BRG_NIC4_DSPB 186
|
||||
#define RESET_BRG_NIC4_DSPA 187
|
||||
#define RESET_BRG_NIC4_VAPB 188
|
||||
#define RESET_BRG_NIC4_CLK81 189
|
||||
#define RESET_BRG_NIC4_MAIN 190
|
||||
#define RESET_BRG_NIC4_ALL 191
|
||||
|
||||
/* RESET6 */
|
||||
#define RESET_BRG_VDEC_PIPEL 192
|
||||
#define RESET_BRG_HEVCF_DMC_PIPEL 193
|
||||
#define RESET_BRG_NIC2TONIC4_PIPEL 194
|
||||
#define RESET_BRG_HDMIRXTONIC2_PIPEL 195
|
||||
#define RESET_BRG_SECTONIC4_PIPEL 196
|
||||
#define RESET_BRG_VPUTONOC_PIPEL 197
|
||||
#define RESET_BRG_NIC4TONOC_PIPEL 198
|
||||
#define RESET_BRG_NIC3TONOC_PIPEL 199
|
||||
#define RESET_BRG_NIC2TONOC_PIPEL 200
|
||||
#define RESET_BRG_NNATONOC_PIPEL 201
|
||||
#define RESET_BRG_FRISP3_PIPEL 202
|
||||
#define RESET_BRG_FRISP2_PIPEL 203
|
||||
#define RESET_BRG_FRISP1_PIPEL 204
|
||||
#define RESET_BRG_FRISP0_PIPEL 205
|
||||
/* 206-217 */
|
||||
#define RESET_BRG_AMPIPE_NAND 218
|
||||
#define RESET_BRG_AMPIPE_ETH 219
|
||||
/* 220 */
|
||||
#define RESET_BRG_AM2AXI0 221
|
||||
#define RESET_BRG_AM2AXI1 222
|
||||
#define RESET_BRG_AM2AXI2 223
|
||||
|
||||
#endif /* ___DTS_AMLOGIC_T7_RESET_H */
|
||||
@ -5,6 +5,7 @@
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/power/amlogic,t7-pwrc.h>
|
||||
#include "amlogic-t7-reset.h"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
@ -149,6 +150,12 @@ apb4: bus@fe000000 {
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
|
||||
|
||||
reset: reset-controller@2000 {
|
||||
compatible = "amlogic,t7-reset";
|
||||
reg = <0x0 0x2000 0x0 0x98>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
watchdog@2100 {
|
||||
compatible = "amlogic,t7-wdt";
|
||||
reg = <0x0 0x2100 0x0 0x10>;
|
||||
|
||||
@ -1663,9 +1663,28 @@ pwrc: power-controller {
|
||||
<250000000>,
|
||||
<0>; /* Do Nothing */
|
||||
};
|
||||
|
||||
mipi_analog_dphy: phy {
|
||||
compatible = "amlogic,g12a-mipi-dphy-analog";
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mipi_dphy: phy@44000 {
|
||||
compatible = "amlogic,axg-mipi-dphy";
|
||||
reg = <0x0 0x44000 0x0 0x2000>;
|
||||
clocks = <&clkc CLKID_MIPI_DSI_PHY>;
|
||||
clock-names = "pclk";
|
||||
resets = <&reset RESET_MIPI_DSI_PHY>;
|
||||
reset-names = "phy";
|
||||
phys = <&mipi_analog_dphy>;
|
||||
phy-names = "analog";
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb3_pcie_phy: phy@46000 {
|
||||
compatible = "amlogic,g12a-usb3-pcie-phy";
|
||||
reg = <0x0 0x46000 0x0 0x2000>;
|
||||
@ -2152,6 +2171,15 @@ hdmi_tx_out: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_in>;
|
||||
};
|
||||
};
|
||||
|
||||
/* DPI output port */
|
||||
dpi_port: port@2 {
|
||||
reg = <2>;
|
||||
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&mipi_dsi_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@ffc01000 {
|
||||
@ -2189,6 +2217,48 @@ gpio_intc: interrupt-controller@f080 {
|
||||
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
||||
};
|
||||
|
||||
mipi_dsi: dsi@7000 {
|
||||
compatible = "amlogic,meson-g12a-dw-mipi-dsi";
|
||||
reg = <0x0 0x7000 0x0 0x1000>;
|
||||
resets = <&reset RESET_MIPI_DSI_HOST>;
|
||||
reset-names = "top";
|
||||
clocks = <&clkc CLKID_MIPI_DSI_HOST>,
|
||||
<&clkc CLKID_MIPI_DSI_PXCLK>,
|
||||
<&clkc CLKID_CTS_ENCL>;
|
||||
clock-names = "pclk", "bit", "px";
|
||||
phys = <&mipi_dphy>;
|
||||
phy-names = "dphy";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
|
||||
<&clkc CLKID_CTS_ENCL_SEL>,
|
||||
<&clkc CLKID_VCLK2_SEL>;
|
||||
assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
|
||||
<&clkc CLKID_VCLK2_DIV1>,
|
||||
<&clkc CLKID_GP0_PLL>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* VPU VENC Input */
|
||||
mipi_dsi_venc_port: port@0 {
|
||||
reg = <0>;
|
||||
|
||||
mipi_dsi_in: endpoint {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
/* DSI Output */
|
||||
mipi_dsi_panel_port: port@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
watchdog: watchdog@f0d0 {
|
||||
compatible = "amlogic,meson-gxbb-wdt";
|
||||
reg = <0x0 0xf0d0 0x0 0x10>;
|
||||
|
||||
@ -0,0 +1,384 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
|
||||
* Copyright 2023 MNT Research GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12b-bananapi-cm4.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
model = "MNT Reform 2 with BPI-CM4 Module";
|
||||
compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
|
||||
chassis-type = "laptop";
|
||||
|
||||
aliases {
|
||||
ethernet0 = ðmac;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c3;
|
||||
};
|
||||
|
||||
hdmi_connector: hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "MNT-REFORM2-BPI-CM4";
|
||||
audio-widgets = "Headphone", "Headphone Jack",
|
||||
"Speaker", "External Speaker",
|
||||
"Microphone", "Mic Jack";
|
||||
audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
|
||||
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
|
||||
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
|
||||
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
|
||||
"TDM_A Playback", "TDMOUT_A OUT",
|
||||
"TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT",
|
||||
"TDMIN_B IN 1", "TDM_B Capture",
|
||||
"TDMIN_B IN 4", "TDM_B Loopback",
|
||||
"TODDR_A IN 1", "TDMIN_B OUT",
|
||||
"TODDR_B IN 1", "TDMIN_B OUT",
|
||||
"TODDR_C IN 1", "TDMIN_B OUT",
|
||||
"Headphone Jack", "HP_L",
|
||||
"Headphone Jack", "HP_R",
|
||||
"External Speaker", "SPK_LP",
|
||||
"External Speaker", "SPK_LN",
|
||||
"External Speaker", "SPK_RP",
|
||||
"External Speaker", "SPK_RN",
|
||||
"LINPUT1", "Mic Jack",
|
||||
"Mic Jack", "MICB";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&toddr_a>;
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&toddr_b>;
|
||||
};
|
||||
|
||||
dai-link-5 {
|
||||
sound-dai = <&toddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-6 {
|
||||
sound-dai = <&tdmif_a>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Analog Audio */
|
||||
dai-link-7 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&wm8960>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-8 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_main_1v8: regulator-main-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <®_main_3v3>;
|
||||
};
|
||||
|
||||
reg_main_1v2: regulator-main-1v2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1V2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <®_main_5v>;
|
||||
};
|
||||
|
||||
reg_main_3v3: regulator-main-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
reg_main_5v: regulator-main-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_main_usb: regulator-main-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <®_main_5v>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm_AO_ab 0 10000 0>;
|
||||
power-supply = <®_main_usb>;
|
||||
enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
|
||||
brightness-levels = <0 32 64 128 160 200 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "innolux,n125hce-gn1";
|
||||
power-supply = <®_main_3v3>;
|
||||
backlight = <&backlight>;
|
||||
no-hpd;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&edp_bridge_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
clock_12288: clock_12288 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_analog_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi_dsi {
|
||||
status = "okay";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_GP0_PLL>,
|
||||
<&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
|
||||
<&clkc CLKID_MIPI_DSI_PXCLK>,
|
||||
<&clkc CLKID_CTS_ENCL_SEL>,
|
||||
<&clkc CLKID_VCLK2_SEL>;
|
||||
assigned-clock-parents = <0>,
|
||||
<&clkc CLKID_GP0_PLL>,
|
||||
<0>,
|
||||
<&clkc CLKID_VCLK2_DIV1>,
|
||||
<&clkc CLKID_GP0_PLL>;
|
||||
assigned-clock-rates = <936000000>,
|
||||
<0>,
|
||||
<936000000>,
|
||||
<0>,
|
||||
<0>;
|
||||
};
|
||||
|
||||
&mipi_dsi_panel_port {
|
||||
mipi_dsi_out: endpoint {
|
||||
remote-endpoint = <&edp_bridge_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_AO_ab {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_ao_a_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
edp_bridge: bridge@2c {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2c>;
|
||||
enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
|
||||
vccio-supply = <®_main_1v8>;
|
||||
vpll-supply = <®_main_1v8>;
|
||||
vcca-supply = <®_main_1v2>;
|
||||
vcc-supply = <®_main_1v2>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
edp_bridge_in: endpoint {
|
||||
remote-endpoint = <&mipi_dsi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
edp_bridge_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
wm8960: codec@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
clocks = <&clock_12288>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
wlf,shared-lrclk;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "nxp,pcf8523";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
|
||||
<&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
|
||||
assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
|
||||
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
|
||||
assigned-clock-rates = <0>, <0>;
|
||||
};
|
||||
|
||||
&tdmin_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
dr_mode = "host";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
108
arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
Normal file
108
arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
Normal file
@ -0,0 +1,108 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/clock/g12a-clkc.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
/*
|
||||
* Enable Khadas TS050 DSI Panel + Touch Controller
|
||||
* on Khadas VIM3 (A311D) and VIM3L (S905D3)
|
||||
*/
|
||||
|
||||
&{/} {
|
||||
panel_backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm_AO_cd 0 25000 0>;
|
||||
brightness-levels = <0 255>;
|
||||
num-interpolated-steps = <255>;
|
||||
default-brightness-level = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
touch-controller@38 {
|
||||
compatible = "edt,edt-ft5206";
|
||||
reg = <0x38>;
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
|
||||
touchscreen-size-x = <1080>;
|
||||
touchscreen-size-y = <1920>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dsi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_GP0_PLL>,
|
||||
<&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
|
||||
<&clkc CLKID_MIPI_DSI_PXCLK>,
|
||||
<&clkc CLKID_CTS_ENCL_SEL>,
|
||||
<&clkc CLKID_VCLK2_SEL>;
|
||||
assigned-clock-parents = <0>,
|
||||
<&clkc CLKID_GP0_PLL>,
|
||||
<0>,
|
||||
<&clkc CLKID_VCLK2_DIV1>,
|
||||
<&clkc CLKID_GP0_PLL>;
|
||||
assigned-clock-rates = <960000000>,
|
||||
<0>,
|
||||
<960000000>,
|
||||
<0>,
|
||||
<0>;
|
||||
|
||||
panel@0 {
|
||||
compatible = "khadas,ts050";
|
||||
reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
|
||||
enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vcc_3v3>;
|
||||
backlight = <&panel_backlight>;
|
||||
reg = <0>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_analog_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
|
||||
};
|
||||
@ -65,10 +65,15 @@ xtal: xtal-clk {
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
pwrc: power-controller {
|
||||
compatible = "amlogic,meson-s4-pwrc";
|
||||
#power-domain-cells = <1>;
|
||||
status = "okay";
|
||||
firmware {
|
||||
sm: secure-monitor {
|
||||
compatible = "amlogic,meson-gxbb-sm";
|
||||
|
||||
pwrc: power-controller {
|
||||
compatible = "amlogic,meson-s4-pwrc";
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
|
||||
@ -100,6 +100,38 @@ &i2c0 {
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
power-monitor@10 {
|
||||
compatible = "microchip,pac1934";
|
||||
reg = <0x10>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel@1 {
|
||||
reg = <0x1>;
|
||||
shunt-resistor-micro-ohms = <10000>;
|
||||
label = "VDDREG";
|
||||
};
|
||||
|
||||
channel@2 {
|
||||
reg = <0x2>;
|
||||
shunt-resistor-micro-ohms = <10000>;
|
||||
label = "VDDA25";
|
||||
};
|
||||
|
||||
channel@3 {
|
||||
reg = <0x3>;
|
||||
shunt-resistor-micro-ohms = <10000>;
|
||||
label = "VDD25";
|
||||
};
|
||||
|
||||
channel@4 {
|
||||
reg = <0x4>;
|
||||
shunt-resistor-micro-ohms = <10000>;
|
||||
label = "VDDA_REG";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
|
||||
@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
cpus: cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
||||
599
arch/riscv/boot/dts/starfive/jh7110-common.dtsi
Normal file
599
arch/riscv/boot/dts/starfive/jh7110-common.dtsi
Normal file
@ -0,0 +1,599 @@
|
||||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
/*
|
||||
* Copyright (C) 2022 StarFive Technology Co., Ltd.
|
||||
* Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "jh7110.dtsi"
|
||||
#include "jh7110-pinfunc.h"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
i2c0 = &i2c0;
|
||||
i2c2 = &i2c2;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
mmc0 = &mmc0;
|
||||
mmc1 = &mmc1;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x40000000 0x1 0x0>;
|
||||
};
|
||||
|
||||
gpio-restart {
|
||||
compatible = "gpio-restart";
|
||||
gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
|
||||
priority = <224>;
|
||||
};
|
||||
|
||||
pwmdac_codec: audio-codec {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
simple-audio-card,dai-link@0 {
|
||||
reg = <0>;
|
||||
format = "left_j";
|
||||
bitclock-master = <&sndcpu0>;
|
||||
frame-master = <&sndcpu0>;
|
||||
|
||||
sndcpu0: cpu {
|
||||
sound-dai = <&pwmdac>;
|
||||
};
|
||||
|
||||
codec {
|
||||
sound-dai = <&pwmdac_codec>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpus {
|
||||
timebase-frequency = <4000000>;
|
||||
};
|
||||
|
||||
&dvp_clk {
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
&gmac0_rgmii_rxin {
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
&gmac0_rmii_refin {
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
&gmac1_rgmii_rxin {
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
&gmac1_rmii_refin {
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
&hdmitx0_pixelclk {
|
||||
clock-frequency = <297000000>;
|
||||
};
|
||||
|
||||
&i2srx_bclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&i2srx_lrck_ext {
|
||||
clock-frequency = <192000>;
|
||||
};
|
||||
|
||||
&i2stx_bclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&i2stx_lrck_ext {
|
||||
clock-frequency = <192000>;
|
||||
};
|
||||
|
||||
&mclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&osc {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&rtc_osc {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&tdm_ext {
|
||||
clock-frequency = <49152000>;
|
||||
};
|
||||
|
||||
&camss {
|
||||
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
|
||||
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
|
||||
assigned-clock-rates = <49500000>, <198000000>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
camss_from_csi2rx: endpoint {
|
||||
remote-endpoint = <&csi2rx_to_camss>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi2rx {
|
||||
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
|
||||
assigned-clock-rates = <297000000>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
/* remote MIPI sensor endpoint */
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
csi2rx_to_camss: endpoint {
|
||||
remote-endpoint = <&camss_from_csi2rx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins>;
|
||||
status = "okay";
|
||||
|
||||
axp15060: pmic@36 {
|
||||
compatible = "x-powers,axp15060";
|
||||
reg = <0x36>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
regulators {
|
||||
vcc_3v3: dcdc1 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3";
|
||||
};
|
||||
|
||||
vdd_cpu: dcdc2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1540000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
emmc_vdd: aldo4 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "emmc_vdd";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
max-frequency = <100000000>;
|
||||
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
cap-mmc-hw-reset;
|
||||
post-power-on-delay-ms = <200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&emmc_vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
max-frequency = <100000000>;
|
||||
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
post-power-on-delay-ms = <200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwmdac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwmdac_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
nor_flash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
cdns,read-delay = <5>;
|
||||
spi-max-frequency = <12000000>;
|
||||
cdns,tshsl-ns = <1>;
|
||||
cdns,tsd2d-ns = <1>;
|
||||
cdns,tchsh-ns = <1>;
|
||||
cdns,tslch-ns = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
spl@0 {
|
||||
reg = <0x0 0x80000>;
|
||||
};
|
||||
uboot-env@f0000 {
|
||||
reg = <0xf0000 0x10000>;
|
||||
};
|
||||
uboot@100000 {
|
||||
reg = <0x100000 0x400000>;
|
||||
};
|
||||
reserved-data@600000 {
|
||||
reg = <0x600000 0xa00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_dev0: spi@0 {
|
||||
compatible = "rohm,dh2228fv";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sysgpio {
|
||||
i2c0_pins: i2c0-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(57, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C0_CLK,
|
||||
GPI_SYS_I2C0_CLK)>,
|
||||
<GPIOMUX(58, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C0_DATA,
|
||||
GPI_SYS_I2C0_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(3, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C2_CLK,
|
||||
GPI_SYS_I2C2_CLK)>,
|
||||
<GPIOMUX(2, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C2_DATA,
|
||||
GPI_SYS_I2C2_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c5_pins: i2c5-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(19, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C5_CLK,
|
||||
GPI_SYS_I2C5_CLK)>,
|
||||
<GPIOMUX(20, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C5_DATA,
|
||||
GPI_SYS_I2C5_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(16, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C6_CLK,
|
||||
GPI_SYS_I2C6_CLK)>,
|
||||
<GPIOMUX(17, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C6_DATA,
|
||||
GPI_SYS_I2C6_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins: mmc0-0 {
|
||||
rst-pins {
|
||||
pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
mmc-pins {
|
||||
pinmux = <PINMUX(64, 0)>,
|
||||
<PINMUX(65, 0)>,
|
||||
<PINMUX(66, 0)>,
|
||||
<PINMUX(67, 0)>,
|
||||
<PINMUX(68, 0)>,
|
||||
<PINMUX(69, 0)>,
|
||||
<PINMUX(70, 0)>,
|
||||
<PINMUX(71, 0)>,
|
||||
<PINMUX(72, 0)>,
|
||||
<PINMUX(73, 0)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_pins: mmc1-0 {
|
||||
clk-pins {
|
||||
pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
mmc-pins {
|
||||
pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
|
||||
GPOEN_SYS_SDIO1_CMD,
|
||||
GPI_SYS_SDIO1_CMD)>,
|
||||
<GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
|
||||
GPOEN_SYS_SDIO1_DATA0,
|
||||
GPI_SYS_SDIO1_DATA0)>,
|
||||
<GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
|
||||
GPOEN_SYS_SDIO1_DATA1,
|
||||
GPI_SYS_SDIO1_DATA1)>,
|
||||
<GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
|
||||
GPOEN_SYS_SDIO1_DATA2,
|
||||
GPI_SYS_SDIO1_DATA2)>,
|
||||
<GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
|
||||
GPOEN_SYS_SDIO1_DATA3,
|
||||
GPI_SYS_SDIO1_DATA3)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pwmdac_pins: pwmdac-0 {
|
||||
pwmdac-pins {
|
||||
pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>,
|
||||
<GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-0 {
|
||||
pwm-pins {
|
||||
pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
|
||||
GPOEN_SYS_PWM0_CHANNEL0,
|
||||
GPI_NONE)>,
|
||||
<GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
|
||||
GPOEN_SYS_PWM0_CHANNEL1,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0_pins: spi0-0 {
|
||||
mosi-pins {
|
||||
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
|
||||
miso-pins {
|
||||
pinmux = <GPIOMUX(53, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_SPI0_RXD)>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
|
||||
sck-pins {
|
||||
pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
|
||||
GPOEN_ENABLE,
|
||||
GPI_SYS_SPI0_CLK)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
|
||||
ss-pins {
|
||||
pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
|
||||
GPOEN_ENABLE,
|
||||
GPI_SYS_SPI0_FSS)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-0 {
|
||||
tx-pins {
|
||||
pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pinmux = <GPIOMUX(6, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_UART0_RX)>;
|
||||
bias-disable; /* external pull-up */
|
||||
drive-strength = <2>;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&U74_1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_4 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
30
arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
Normal file
30
arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
Normal file
@ -0,0 +1,30 @@
|
||||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
/*
|
||||
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "jh7110-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Milk-V Mars";
|
||||
compatible = "milkv,mars", "starfive,jh7110";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
starfive,tx-use-rgmii-clk;
|
||||
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
|
||||
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
|
||||
};
|
||||
|
||||
|
||||
&phy0 {
|
||||
motorcomm,tx-clk-adj-enabled;
|
||||
motorcomm,tx-clk-10-inverted;
|
||||
motorcomm,tx-clk-100-inverted;
|
||||
motorcomm,tx-clk-1000-inverted;
|
||||
motorcomm,rx-clk-drv-microamp = <3970>;
|
||||
motorcomm,rx-data-drv-microamp = <2910>;
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
};
|
||||
@ -5,188 +5,11 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "jh7110.dtsi"
|
||||
#include "jh7110-pinfunc.h"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "jh7110-common.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
i2c0 = &i2c0;
|
||||
i2c2 = &i2c2;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
mmc0 = &mmc0;
|
||||
mmc1 = &mmc1;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
timebase-frequency = <4000000>;
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x40000000 0x1 0x0>;
|
||||
};
|
||||
|
||||
gpio-restart {
|
||||
compatible = "gpio-restart";
|
||||
gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
|
||||
priority = <224>;
|
||||
};
|
||||
|
||||
pwmdac_codec: pwmdac-codec {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
sound-pwmdac {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
simple-audio-card,dai-link@0 {
|
||||
reg = <0>;
|
||||
format = "left_j";
|
||||
bitclock-master = <&sndcpu0>;
|
||||
frame-master = <&sndcpu0>;
|
||||
|
||||
sndcpu0: cpu {
|
||||
sound-dai = <&pwmdac>;
|
||||
};
|
||||
|
||||
codec {
|
||||
sound-dai = <&pwmdac_codec>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dvp_clk {
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
&gmac0_rgmii_rxin {
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
&gmac0_rmii_refin {
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
&gmac1_rgmii_rxin {
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
&gmac1_rmii_refin {
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
&hdmitx0_pixelclk {
|
||||
clock-frequency = <297000000>;
|
||||
};
|
||||
|
||||
&i2srx_bclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&i2srx_lrck_ext {
|
||||
clock-frequency = <192000>;
|
||||
};
|
||||
|
||||
&i2stx_bclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&i2stx_lrck_ext {
|
||||
clock-frequency = <192000>;
|
||||
};
|
||||
|
||||
&mclk_ext {
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
&osc {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&rtc_osc {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&tdm_ext {
|
||||
clock-frequency = <49152000>;
|
||||
};
|
||||
|
||||
&camss {
|
||||
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
|
||||
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
|
||||
assigned-clock-rates = <49500000>, <198000000>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
camss_from_csi2rx: endpoint {
|
||||
remote-endpoint = <&csi2rx_to_camss>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi2rx {
|
||||
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
|
||||
assigned-clock-rates = <297000000>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
/* remote MIPI sensor endpoint */
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
csi2rx_to_camss: endpoint {
|
||||
remote-endpoint = <&camss_from_csi2rx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -206,510 +29,6 @@ phy1: ethernet-phy@1 {
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins>;
|
||||
status = "okay";
|
||||
|
||||
axp15060: pmic@36 {
|
||||
compatible = "x-powers,axp15060";
|
||||
reg = <0x36>;
|
||||
interrupts = <0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
regulators {
|
||||
vcc_3v3: dcdc1 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3";
|
||||
};
|
||||
|
||||
vdd_cpu: dcdc2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1540000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
emmc_vdd: aldo4 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "emmc_vdd";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-sda-hold-time-ns = <300>;
|
||||
i2c-sda-falling-time-ns = <510>;
|
||||
i2c-scl-falling-time-ns = <510>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2srx {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2srx_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2stx0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mclk_ext_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2stx1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2stx1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
max-frequency = <100000000>;
|
||||
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
cap-mmc-hw-reset;
|
||||
post-power-on-delay-ms = <200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&emmc_vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
max-frequency = <100000000>;
|
||||
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
broken-cd;
|
||||
cap-sd-highspeed;
|
||||
post-power-on-delay-ms = <200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwmdac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwmdac_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
nor_flash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
cdns,read-delay = <5>;
|
||||
spi-max-frequency = <12000000>;
|
||||
cdns,tshsl-ns = <1>;
|
||||
cdns,tsd2d-ns = <1>;
|
||||
cdns,tchsh-ns = <1>;
|
||||
cdns,tslch-ns = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
spl@0 {
|
||||
reg = <0x0 0x80000>;
|
||||
};
|
||||
uboot-env@f0000 {
|
||||
reg = <0xf0000 0x10000>;
|
||||
};
|
||||
uboot@100000 {
|
||||
reg = <0x100000 0x400000>;
|
||||
};
|
||||
reserved-data@600000 {
|
||||
reg = <0x600000 0xa00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_dev0: spi@0 {
|
||||
compatible = "rohm,dh2228fv";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sysgpio {
|
||||
i2c0_pins: i2c0-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(57, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C0_CLK,
|
||||
GPI_SYS_I2C0_CLK)>,
|
||||
<GPIOMUX(58, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C0_DATA,
|
||||
GPI_SYS_I2C0_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(3, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C2_CLK,
|
||||
GPI_SYS_I2C2_CLK)>,
|
||||
<GPIOMUX(2, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C2_DATA,
|
||||
GPI_SYS_I2C2_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c5_pins: i2c5-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(19, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C5_CLK,
|
||||
GPI_SYS_I2C5_CLK)>,
|
||||
<GPIOMUX(20, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C5_DATA,
|
||||
GPI_SYS_I2C5_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6-0 {
|
||||
i2c-pins {
|
||||
pinmux = <GPIOMUX(16, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C6_CLK,
|
||||
GPI_SYS_I2C6_CLK)>,
|
||||
<GPIOMUX(17, GPOUT_LOW,
|
||||
GPOEN_SYS_I2C6_DATA,
|
||||
GPI_SYS_I2C6_DATA)>;
|
||||
bias-disable; /* external pull-up */
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2srx_pins: i2srx-0 {
|
||||
clk-sd-pins {
|
||||
pinmux = <GPIOMUX(38, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_I2SRX_BCLK)>,
|
||||
<GPIOMUX(63, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_I2SRX_LRCK)>,
|
||||
<GPIOMUX(38, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_I2STX1_BCLK)>,
|
||||
<GPIOMUX(63, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_I2STX1_LRCK)>,
|
||||
<GPIOMUX(61, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_I2SRX_SDIN0)>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
i2stx1_pins: i2stx1-0 {
|
||||
sd-pins {
|
||||
pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
mclk_ext_pins: mclk-ext-0 {
|
||||
mclk-ext-pins {
|
||||
pinmux = <GPIOMUX(4, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_MCLK_EXT)>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins: mmc0-0 {
|
||||
rst-pins {
|
||||
pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
mmc-pins {
|
||||
pinmux = <PINMUX(64, 0)>,
|
||||
<PINMUX(65, 0)>,
|
||||
<PINMUX(66, 0)>,
|
||||
<PINMUX(67, 0)>,
|
||||
<PINMUX(68, 0)>,
|
||||
<PINMUX(69, 0)>,
|
||||
<PINMUX(70, 0)>,
|
||||
<PINMUX(71, 0)>,
|
||||
<PINMUX(72, 0)>,
|
||||
<PINMUX(73, 0)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_pins: mmc1-0 {
|
||||
clk-pins {
|
||||
pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
mmc-pins {
|
||||
pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
|
||||
GPOEN_SYS_SDIO1_CMD,
|
||||
GPI_SYS_SDIO1_CMD)>,
|
||||
<GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
|
||||
GPOEN_SYS_SDIO1_DATA0,
|
||||
GPI_SYS_SDIO1_DATA0)>,
|
||||
<GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
|
||||
GPOEN_SYS_SDIO1_DATA1,
|
||||
GPI_SYS_SDIO1_DATA1)>,
|
||||
<GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
|
||||
GPOEN_SYS_SDIO1_DATA2,
|
||||
GPI_SYS_SDIO1_DATA2)>,
|
||||
<GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
|
||||
GPOEN_SYS_SDIO1_DATA3,
|
||||
GPI_SYS_SDIO1_DATA3)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pwmdac_pins: pwmdac-0 {
|
||||
pwmdac-pins {
|
||||
pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>,
|
||||
<GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-0 {
|
||||
pwm-pins {
|
||||
pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
|
||||
GPOEN_SYS_PWM0_CHANNEL0,
|
||||
GPI_NONE)>,
|
||||
<GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
|
||||
GPOEN_SYS_PWM0_CHANNEL1,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0_pins: spi0-0 {
|
||||
mosi-pins {
|
||||
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
|
||||
miso-pins {
|
||||
pinmux = <GPIOMUX(53, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_SPI0_RXD)>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
};
|
||||
|
||||
sck-pins {
|
||||
pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
|
||||
GPOEN_ENABLE,
|
||||
GPI_SYS_SPI0_CLK)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
|
||||
ss-pins {
|
||||
pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
|
||||
GPOEN_ENABLE,
|
||||
GPI_SYS_SPI0_FSS)>;
|
||||
bias-disable;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
};
|
||||
};
|
||||
|
||||
tdm_pins: tdm-0 {
|
||||
tx-pins {
|
||||
pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pinmux = <GPIOMUX(61, GPOUT_HIGH,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_TDM_RXD)>;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
sync-pins {
|
||||
pinmux = <GPIOMUX(63, GPOUT_HIGH,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_TDM_SYNC)>;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
pcmclk-pins {
|
||||
pinmux = <GPIOMUX(38, GPOUT_HIGH,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_TDM_CLK)>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-0 {
|
||||
tx-pins {
|
||||
pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
|
||||
GPOEN_ENABLE,
|
||||
GPI_NONE)>;
|
||||
bias-disable;
|
||||
drive-strength = <12>;
|
||||
input-disable;
|
||||
input-schmitt-disable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pinmux = <GPIOMUX(6, GPOUT_LOW,
|
||||
GPOEN_DISABLE,
|
||||
GPI_SYS_UART0_RX)>;
|
||||
bias-disable; /* external pull-up */
|
||||
drive-strength = <2>;
|
||||
input-enable;
|
||||
input-schmitt-enable;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tdm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tdm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&U74_1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&U74_4 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
@ -15,7 +15,7 @@ / {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
cpus: cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
||||
@ -193,6 +193,33 @@ uart0: serial@ffe7014000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
emmc: mmc@ffe7080000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe7080000 0x0 0x10000>;
|
||||
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio0: mmc@ffe7090000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe7090000 0x0 0x10000>;
|
||||
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio1: mmc@ffe70a0000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe70a0000 0x0 0x10000>;
|
||||
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@ffe7f00000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0xff 0xe7f00000 0x0 0x100>;
|
||||
@ -311,33 +338,6 @@ dmac0: dma-controller@ffefc00000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
emmc: mmc@ffe7080000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe7080000 0x0 0x10000>;
|
||||
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio0: mmc@ffe7090000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe7090000 0x0 0x10000>;
|
||||
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio1: mmc@ffe70a0000 {
|
||||
compatible = "thead,th1520-dwcmshc";
|
||||
reg = <0xff 0xe70a0000 0x0 0x10000>;
|
||||
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sdhci_clk>;
|
||||
clock-names = "core";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer0: timer@ffefc32000 {
|
||||
compatible = "snps,dw-apb-timer";
|
||||
reg = <0xff 0xefc32000 0x0 0x14>;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user