From 91ed53491f4fa31879e0965a7e920dc10f78996c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 11:08:04 +0200 Subject: [PATCH 01/51] i2c: rename core source file to allow refactorization The I2C core became quite huge and its monolithic structure makes maintenance hard. So, prepare to break out some functionality into separate files by renaming the source file. Note that we keep the resulting object name constant to avoid regressions. Reviewed-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- Documentation/driver-api/i2c.rst | 2 +- drivers/i2c/Makefile | 4 +++- drivers/i2c/busses/i2c-designware-core.c | 2 +- drivers/i2c/{i2c-core.c => i2c-core-base.c} | 0 4 files changed, 5 insertions(+), 3 deletions(-) rename drivers/i2c/{i2c-core.c => i2c-core-base.c} (100%) diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst index f3939f7852bd..e6d4808ffbab 100644 --- a/Documentation/driver-api/i2c.rst +++ b/Documentation/driver-api/i2c.rst @@ -42,5 +42,5 @@ i2c_adapter devices which don't support those I2C operations. .. kernel-doc:: drivers/i2c/i2c-boardinfo.c :functions: i2c_register_board_info -.. kernel-doc:: drivers/i2c/i2c-core.c +.. kernel-doc:: drivers/i2c/i2c-core-base.c :export: diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 45095b3d16a9..d459c7e59076 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -4,6 +4,8 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o +i2c-core-objs := i2c-core-base.o + obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o @@ -12,4 +14,4 @@ obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_I2C_SLAVE_EEPROM) += i2c-slave-eeprom.o ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG -CFLAGS_i2c-core.o := -Wno-deprecated-declarations +CFLAGS_i2c-core-base.o := -Wno-deprecated-declarations diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index c453717b753b..3c41995634c2 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -583,7 +583,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) */ /* - * i2c-core.c always sets the buffer length of + * i2c-core always sets the buffer length of * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will * be adjusted when receiving the first byte. * Thus we can't stop the transaction here. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core-base.c similarity index 100% rename from drivers/i2c/i2c-core.c rename to drivers/i2c/i2c-core-base.c From e4991ecdc6b8ad2b21f3d6e90ef826b8871103a2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 11:14:17 +0200 Subject: [PATCH 02/51] i2c: break out slave support into separate file Also removes some ifdeffery. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/Makefile | 1 + drivers/i2c/i2c-core-base.c | 102 +------------------------------ drivers/i2c/i2c-core-slave.c | 115 +++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-core.h | 1 + 4 files changed, 118 insertions(+), 101 deletions(-) create mode 100644 drivers/i2c/i2c-core-slave.c diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index d459c7e59076..6c54716e7f28 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o i2c-core-objs := i2c-core-base.o +i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 82576aaccc90..88c0ca664a7b 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -24,7 +24,6 @@ (c) 2013 Wolfram Sang I2C ACPI code Copyright (C) 2014 Intel Corp Author: Lan Tianyu - I2C slave support (c) 2014 by Wolfram Sang */ #define pr_fmt(fmt) "i2c-core: " fmt @@ -1213,7 +1212,7 @@ static int i2c_check_addr_validity(unsigned addr, unsigned short flags) * device uses a reserved address, then it shouldn't be probed. 7-bit * addressing is assumed, 10-bit address devices are rare and should be * explicitly enumerated. */ -static int i2c_check_7bit_addr_validity_strict(unsigned short addr) +int i2c_check_7bit_addr_validity_strict(unsigned short addr) { /* * Reserved addresses per I2C specification: @@ -3727,105 +3726,6 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, } EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); -#if IS_ENABLED(CONFIG_I2C_SLAVE) -int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) -{ - int ret; - - if (!client || !slave_cb) { - WARN(1, "insufficient data\n"); - return -EINVAL; - } - - if (!(client->flags & I2C_CLIENT_SLAVE)) - dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n", - __func__); - - if (!(client->flags & I2C_CLIENT_TEN)) { - /* Enforce stricter address checking */ - ret = i2c_check_7bit_addr_validity_strict(client->addr); - if (ret) { - dev_err(&client->dev, "%s: invalid address\n", __func__); - return ret; - } - } - - if (!client->adapter->algo->reg_slave) { - dev_err(&client->dev, "%s: not supported by adapter\n", __func__); - return -EOPNOTSUPP; - } - - client->slave_cb = slave_cb; - - i2c_lock_adapter(client->adapter); - ret = client->adapter->algo->reg_slave(client); - i2c_unlock_adapter(client->adapter); - - if (ret) { - client->slave_cb = NULL; - dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret); - } - - return ret; -} -EXPORT_SYMBOL_GPL(i2c_slave_register); - -int i2c_slave_unregister(struct i2c_client *client) -{ - int ret; - - if (!client->adapter->algo->unreg_slave) { - dev_err(&client->dev, "%s: not supported by adapter\n", __func__); - return -EOPNOTSUPP; - } - - i2c_lock_adapter(client->adapter); - ret = client->adapter->algo->unreg_slave(client); - i2c_unlock_adapter(client->adapter); - - if (ret == 0) - client->slave_cb = NULL; - else - dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret); - - return ret; -} -EXPORT_SYMBOL_GPL(i2c_slave_unregister); - -/** - * i2c_detect_slave_mode - detect operation mode - * @dev: The device owning the bus - * - * This checks the device nodes for an I2C slave by checking the address - * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS - * flag this means the device is configured to act as a I2C slave and it will - * be listening at that address. - * - * Returns true if an I2C own slave address is detected, otherwise returns - * false. - */ -bool i2c_detect_slave_mode(struct device *dev) -{ - if (IS_BUILTIN(CONFIG_OF) && dev->of_node) { - struct device_node *child; - u32 reg; - - for_each_child_of_node(dev->of_node, child) { - of_property_read_u32(child, "reg", ®); - if (reg & I2C_OWN_SLAVE_ADDRESS) { - of_node_put(child); - return true; - } - } - } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) { - dev_dbg(dev, "ACPI slave is not supported yet\n"); - } - return false; -} -EXPORT_SYMBOL_GPL(i2c_detect_slave_mode); - -#endif - MODULE_AUTHOR("Simon G. Vogl "); MODULE_DESCRIPTION("I2C-Bus main module"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c new file mode 100644 index 000000000000..4a78c65e9971 --- /dev/null +++ b/drivers/i2c/i2c-core-slave.c @@ -0,0 +1,115 @@ +/* + * Linux I2C core slave support code + * + * Copyright (C) 2014 by Wolfram Sang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include "i2c-core.h" + +int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) +{ + int ret; + + if (!client || !slave_cb) { + WARN(1, "insufficient data\n"); + return -EINVAL; + } + + if (!(client->flags & I2C_CLIENT_SLAVE)) + dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n", + __func__); + + if (!(client->flags & I2C_CLIENT_TEN)) { + /* Enforce stricter address checking */ + ret = i2c_check_7bit_addr_validity_strict(client->addr); + if (ret) { + dev_err(&client->dev, "%s: invalid address\n", __func__); + return ret; + } + } + + if (!client->adapter->algo->reg_slave) { + dev_err(&client->dev, "%s: not supported by adapter\n", __func__); + return -EOPNOTSUPP; + } + + client->slave_cb = slave_cb; + + i2c_lock_adapter(client->adapter); + ret = client->adapter->algo->reg_slave(client); + i2c_unlock_adapter(client->adapter); + + if (ret) { + client->slave_cb = NULL; + dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret); + } + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_slave_register); + +int i2c_slave_unregister(struct i2c_client *client) +{ + int ret; + + if (!client->adapter->algo->unreg_slave) { + dev_err(&client->dev, "%s: not supported by adapter\n", __func__); + return -EOPNOTSUPP; + } + + i2c_lock_adapter(client->adapter); + ret = client->adapter->algo->unreg_slave(client); + i2c_unlock_adapter(client->adapter); + + if (ret == 0) + client->slave_cb = NULL; + else + dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_slave_unregister); + +/** + * i2c_detect_slave_mode - detect operation mode + * @dev: The device owning the bus + * + * This checks the device nodes for an I2C slave by checking the address + * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS + * flag this means the device is configured to act as a I2C slave and it will + * be listening at that address. + * + * Returns true if an I2C own slave address is detected, otherwise returns + * false. + */ +bool i2c_detect_slave_mode(struct device *dev) +{ + if (IS_BUILTIN(CONFIG_OF) && dev->of_node) { + struct device_node *child; + u32 reg; + + for_each_child_of_node(dev->of_node, child) { + of_property_read_u32(child, "reg", ®); + if (reg & I2C_OWN_SLAVE_ADDRESS) { + of_node_put(child); + return true; + } + } + } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) { + dev_dbg(dev, "ACPI slave is not supported yet\n"); + } + return false; +} +EXPORT_SYMBOL_GPL(i2c_detect_slave_mode); diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 17700bfddcf5..77c22b03ff95 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -27,3 +27,4 @@ extern struct rw_semaphore __i2c_board_lock; extern struct list_head __i2c_board_list; extern int __i2c_first_dynamic_bus_num; +int i2c_check_7bit_addr_validity_strict(unsigned short addr); From 22c78d1cce104072747023d2ae0351bf3f97d725 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 12:27:17 +0200 Subject: [PATCH 03/51] i2c: break out smbus support into separate file Break out the exported SMBus functions and the emulation layer into a separate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- Documentation/driver-api/i2c.rst | 3 + drivers/i2c/Makefile | 2 +- drivers/i2c/i2c-core-base.c | 574 ----------------------------- drivers/i2c/i2c-core-smbus.c | 594 +++++++++++++++++++++++++++++++ include/trace/events/i2c.h | 226 +----------- include/trace/events/smbus.h | 249 +++++++++++++ 6 files changed, 849 insertions(+), 799 deletions(-) create mode 100644 drivers/i2c/i2c-core-smbus.c create mode 100644 include/trace/events/smbus.h diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst index e6d4808ffbab..c215503801f0 100644 --- a/Documentation/driver-api/i2c.rst +++ b/Documentation/driver-api/i2c.rst @@ -44,3 +44,6 @@ i2c_adapter devices which don't support those I2C operations. .. kernel-doc:: drivers/i2c/i2c-core-base.c :export: + +.. kernel-doc:: drivers/i2c/i2c-core-smbus.c + :export: diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 6c54716e7f28..a6a90fe2db88 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o -i2c-core-objs := i2c-core-base.o +i2c-core-objs := i2c-core-base.o i2c-core-smbus.o i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 88c0ca664a7b..70fc4624c69c 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -14,9 +14,6 @@ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki . - All SMBus-related things are written by Frodo Looijaard - SMBus 2.0 support by Mark Studebaker and - Jean Delvare Mux support by Rodolfo Giometti and Michael Lawnick OF support is copyright (c) 2008 Jochen Friedrich @@ -3155,577 +3152,6 @@ void i2c_put_adapter(struct i2c_adapter *adap) } EXPORT_SYMBOL(i2c_put_adapter); -/* The SMBus parts */ - -#define POLY (0x1070U << 3) -static u8 crc8(u16 data) -{ - int i; - - for (i = 0; i < 8; i++) { - if (data & 0x8000) - data = data ^ POLY; - data = data << 1; - } - return (u8)(data >> 8); -} - -/* Incremental CRC8 over count bytes in the array pointed to by p */ -static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) -{ - int i; - - for (i = 0; i < count; i++) - crc = crc8((crc ^ p[i]) << 8); - return crc; -} - -/* Assume a 7-bit address, which is reasonable for SMBus */ -static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) -{ - /* The address will be sent first */ - u8 addr = i2c_8bit_addr_from_msg(msg); - pec = i2c_smbus_pec(pec, &addr, 1); - - /* The data buffer follows */ - return i2c_smbus_pec(pec, msg->buf, msg->len); -} - -/* Used for write only transactions */ -static inline void i2c_smbus_add_pec(struct i2c_msg *msg) -{ - msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); - msg->len++; -} - -/* Return <0 on CRC error - If there was a write before this read (most cases) we need to take the - partial CRC from the write part into account. - Note that this function does modify the message (we need to decrease the - message length to hide the CRC byte from the caller). */ -static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) -{ - u8 rpec = msg->buf[--msg->len]; - cpec = i2c_smbus_msg_pec(cpec, msg); - - if (rpec != cpec) { - pr_debug("Bad PEC 0x%02x vs. 0x%02x\n", - rpec, cpec); - return -EBADMSG; - } - return 0; -} - -/** - * i2c_smbus_read_byte - SMBus "receive byte" protocol - * @client: Handle to slave device - * - * This executes the SMBus "receive byte" protocol, returning negative errno - * else the byte received from the device. - */ -s32 i2c_smbus_read_byte(const struct i2c_client *client) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, 0, - I2C_SMBUS_BYTE, &data); - return (status < 0) ? status : data.byte; -} -EXPORT_SYMBOL(i2c_smbus_read_byte); - -/** - * i2c_smbus_write_byte - SMBus "send byte" protocol - * @client: Handle to slave device - * @value: Byte to be sent - * - * This executes the SMBus "send byte" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) -{ - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); -} -EXPORT_SYMBOL(i2c_smbus_write_byte); - -/** - * i2c_smbus_read_byte_data - SMBus "read byte" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * - * This executes the SMBus "read byte" protocol, returning negative errno - * else a data byte received from the device. - */ -s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_BYTE_DATA, &data); - return (status < 0) ? status : data.byte; -} -EXPORT_SYMBOL(i2c_smbus_read_byte_data); - -/** - * i2c_smbus_write_byte_data - SMBus "write byte" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @value: Byte being written - * - * This executes the SMBus "write byte" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, - u8 value) -{ - union i2c_smbus_data data; - data.byte = value; - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_BYTE_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_byte_data); - -/** - * i2c_smbus_read_word_data - SMBus "read word" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * - * This executes the SMBus "read word" protocol, returning negative errno - * else a 16-bit unsigned "word" received from the device. - */ -s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_WORD_DATA, &data); - return (status < 0) ? status : data.word; -} -EXPORT_SYMBOL(i2c_smbus_read_word_data); - -/** - * i2c_smbus_write_word_data - SMBus "write word" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @value: 16-bit "word" being written - * - * This executes the SMBus "write word" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, - u16 value) -{ - union i2c_smbus_data data; - data.word = value; - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_WORD_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_word_data); - -/** - * i2c_smbus_read_block_data - SMBus "block read" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @values: Byte array into which data will be read; big enough to hold - * the data returned by the slave. SMBus allows at most 32 bytes. - * - * This executes the SMBus "block read" protocol, returning negative errno - * else the number of data bytes in the slave's response. - * - * Note that using this function requires that the client's adapter support - * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers - * support this; its emulation through I2C messaging relies on a specific - * mechanism (I2C_M_RECV_LEN) which may not be implemented. - */ -s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, - u8 *values) -{ - union i2c_smbus_data data; - int status; - - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_BLOCK_DATA, &data); - if (status) - return status; - - memcpy(values, &data.block[1], data.block[0]); - return data.block[0]; -} -EXPORT_SYMBOL(i2c_smbus_read_block_data); - -/** - * i2c_smbus_write_block_data - SMBus "block write" protocol - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @length: Size of data block; SMBus allows at most 32 bytes - * @values: Byte array which will be written. - * - * This executes the SMBus "block write" protocol, returning negative errno - * else zero on success. - */ -s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, - u8 length, const u8 *values) -{ - union i2c_smbus_data data; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - memcpy(&data.block[1], values, length); - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_BLOCK_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_block_data); - -/* Returns the number of read bytes */ -s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, - u8 length, u8 *values) -{ - union i2c_smbus_data data; - int status; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); - if (status < 0) - return status; - - memcpy(values, &data.block[1], data.block[0]); - return data.block[0]; -} -EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); - -s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, - u8 length, const u8 *values) -{ - union i2c_smbus_data data; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - data.block[0] = length; - memcpy(data.block + 1, values, length); - return i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_WRITE, command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); -} -EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); - -/* Simulate a SMBus command using the i2c protocol - No checking of parameters is done! */ -static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, - unsigned short flags, - char read_write, u8 command, int size, - union i2c_smbus_data *data) -{ - /* So we need to generate a series of msgs. In the case of writing, we - need to use only one message; when reading, we need two. We initialize - most things with sane defaults, to keep the code below somewhat - simpler. */ - unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; - unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; - int num = read_write == I2C_SMBUS_READ ? 2 : 1; - int i; - u8 partial_pec = 0; - int status; - struct i2c_msg msg[2] = { - { - .addr = addr, - .flags = flags, - .len = 1, - .buf = msgbuf0, - }, { - .addr = addr, - .flags = flags | I2C_M_RD, - .len = 0, - .buf = msgbuf1, - }, - }; - - msgbuf0[0] = command; - switch (size) { - case I2C_SMBUS_QUICK: - msg[0].len = 0; - /* Special case: The read/write field is used as data */ - msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? - I2C_M_RD : 0); - num = 1; - break; - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_READ) { - /* Special case: only a read! */ - msg[0].flags = I2C_M_RD | flags; - num = 1; - } - break; - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_READ) - msg[1].len = 1; - else { - msg[0].len = 2; - msgbuf0[1] = data->byte; - } - break; - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_READ) - msg[1].len = 2; - else { - msg[0].len = 3; - msgbuf0[1] = data->word & 0xff; - msgbuf0[2] = data->word >> 8; - } - break; - case I2C_SMBUS_PROC_CALL: - num = 2; /* Special case */ - read_write = I2C_SMBUS_READ; - msg[0].len = 3; - msg[1].len = 2; - msgbuf0[1] = data->word & 0xff; - msgbuf0[2] = data->word >> 8; - break; - case I2C_SMBUS_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - msg[1].flags |= I2C_M_RECV_LEN; - msg[1].len = 1; /* block length will be added by - the underlying bus driver */ - } else { - msg[0].len = data->block[0] + 2; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; - } - break; - case I2C_SMBUS_BLOCK_PROC_CALL: - num = 2; /* Another special case */ - read_write = I2C_SMBUS_READ; - if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - msg[0].len = data->block[0] + 2; - for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; - msg[1].flags |= I2C_M_RECV_LEN; - msg[1].len = 1; /* block length will be added by - the underlying bus driver */ - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - msg[1].len = data->block[0]; - } else { - msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } - for (i = 1; i <= data->block[0]; i++) - msgbuf0[i] = data->block[i]; - } - break; - default: - dev_err(&adapter->dev, "Unsupported transaction %d\n", size); - return -EOPNOTSUPP; - } - - i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK - && size != I2C_SMBUS_I2C_BLOCK_DATA); - if (i) { - /* Compute PEC if first message is a write */ - if (!(msg[0].flags & I2C_M_RD)) { - if (num == 1) /* Write only */ - i2c_smbus_add_pec(&msg[0]); - else /* Write followed by read */ - partial_pec = i2c_smbus_msg_pec(0, &msg[0]); - } - /* Ask for PEC if last message is a read */ - if (msg[num-1].flags & I2C_M_RD) - msg[num-1].len++; - } - - status = i2c_transfer(adapter, msg, num); - if (status < 0) - return status; - - /* Check PEC if last message is a read */ - if (i && (msg[num-1].flags & I2C_M_RD)) { - status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); - if (status < 0) - return status; - } - - if (read_write == I2C_SMBUS_READ) - switch (size) { - case I2C_SMBUS_BYTE: - data->byte = msgbuf0[0]; - break; - case I2C_SMBUS_BYTE_DATA: - data->byte = msgbuf1[0]; - break; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - data->word = msgbuf1[0] | (msgbuf1[1] << 8); - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - for (i = 0; i < data->block[0]; i++) - data->block[i+1] = msgbuf1[i]; - break; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - for (i = 0; i < msgbuf1[0] + 1; i++) - data->block[i] = msgbuf1[i]; - break; - } - return 0; -} - -/** - * i2c_smbus_xfer - execute SMBus protocol operations - * @adapter: Handle to I2C bus - * @addr: Address of SMBus slave on that bus - * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) - * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE - * @command: Byte interpreted by slave, for protocols which use such bytes - * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL - * @data: Data to be read or written - * - * This executes an SMBus protocol operation, and returns a negative - * errno code else zero on success. - */ -s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - union i2c_smbus_data *data) -{ - unsigned long orig_jiffies; - int try; - s32 res; - - /* If enabled, the following two tracepoints are conditional on - * read_write and protocol. - */ - trace_smbus_write(adapter, addr, flags, read_write, - command, protocol, data); - trace_smbus_read(adapter, addr, flags, read_write, - command, protocol); - - flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; - - if (adapter->algo->smbus_xfer) { - i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); - - /* Retry automatically on arbitration loss */ - orig_jiffies = jiffies; - for (res = 0, try = 0; try <= adapter->retries; try++) { - res = adapter->algo->smbus_xfer(adapter, addr, flags, - read_write, command, - protocol, data); - if (res != -EAGAIN) - break; - if (time_after(jiffies, - orig_jiffies + adapter->timeout)) - break; - } - i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); - - if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) - goto trace; - /* - * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't - * implement native support for the SMBus operation. - */ - } - - res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, - command, protocol, data); - -trace: - /* If enabled, the reply tracepoint is conditional on read_write. */ - trace_smbus_reply(adapter, addr, flags, read_write, - command, protocol, data); - trace_smbus_result(adapter, addr, flags, read_write, - command, protocol, res); - - return res; -} -EXPORT_SYMBOL(i2c_smbus_xfer); - -/** - * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate - * @client: Handle to slave device - * @command: Byte interpreted by slave - * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes - * @values: Byte array into which data will be read; big enough to hold - * the data returned by the slave. SMBus allows at most - * I2C_SMBUS_BLOCK_MAX bytes. - * - * This executes the SMBus "block read" protocol if supported by the adapter. - * If block read is not supported, it emulates it using either word or byte - * read protocols depending on availability. - * - * The addresses of the I2C slave device that are accessed with this function - * must be mapped to a linear region, so that a block read will have the same - * effect as a byte read. Before using this function you must double-check - * if the I2C slave does support exchanging a block transfer with a byte - * transfer. - */ -s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, - u8 command, u8 length, u8 *values) -{ - u8 i = 0; - int status; - - if (length > I2C_SMBUS_BLOCK_MAX) - length = I2C_SMBUS_BLOCK_MAX; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return i2c_smbus_read_i2c_block_data(client, command, length, values); - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) - return -EOPNOTSUPP; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { - while ((i + 2) <= length) { - status = i2c_smbus_read_word_data(client, command + i); - if (status < 0) - return status; - values[i] = status & 0xff; - values[i + 1] = status >> 8; - i += 2; - } - } - - while (i < length) { - status = i2c_smbus_read_byte_data(client, command + i); - if (status < 0) - return status; - values[i] = status; - i++; - } - - return i; -} -EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); - MODULE_AUTHOR("Simon G. Vogl "); MODULE_DESCRIPTION("I2C-Bus main module"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c new file mode 100644 index 000000000000..10f00a82ec9d --- /dev/null +++ b/drivers/i2c/i2c-core-smbus.c @@ -0,0 +1,594 @@ +/* + * Linux I2C core SMBus and SMBus emulation code + * + * This file contains the SMBus functions which are always included in the I2C + * core because they can be emulated via I2C. SMBus specific extensions + * (e.g. smbalert) are handled in a seperate i2c-smbus module. + * + * All SMBus-related things are written by Frodo Looijaard + * SMBus 2.0 support by Mark Studebaker and + * Jean Delvare + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + + +/* The SMBus parts */ + +#define POLY (0x1070U << 3) +static u8 crc8(u16 data) +{ + int i; + + for (i = 0; i < 8; i++) { + if (data & 0x8000) + data = data ^ POLY; + data = data << 1; + } + return (u8)(data >> 8); +} + +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) +{ + int i; + + for (i = 0; i < count; i++) + crc = crc8((crc ^ p[i]) << 8); + return crc; +} + +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) +{ + /* The address will be sent first */ + u8 addr = i2c_8bit_addr_from_msg(msg); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); +} + +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) +{ + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; +} + +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) +{ + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); + + if (rpec != cpec) { + pr_debug("Bad PEC 0x%02x vs. 0x%02x\n", + rpec, cpec); + return -EBADMSG; + } + return 0; +} + +/** + * i2c_smbus_read_byte - SMBus "receive byte" protocol + * @client: Handle to slave device + * + * This executes the SMBus "receive byte" protocol, returning negative errno + * else the byte received from the device. + */ +s32 i2c_smbus_read_byte(const struct i2c_client *client) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte); + +/** + * i2c_smbus_write_byte - SMBus "send byte" protocol + * @client: Handle to slave device + * @value: Byte to be sent + * + * This executes the SMBus "send byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} +EXPORT_SYMBOL(i2c_smbus_write_byte); + +/** + * i2c_smbus_read_byte_data - SMBus "read byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read byte" protocol, returning negative errno + * else a data byte received from the device. + */ +s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte_data); + +/** + * i2c_smbus_write_byte_data - SMBus "write byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: Byte being written + * + * This executes the SMBus "write byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, + u8 value) +{ + union i2c_smbus_data data; + data.byte = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_byte_data); + +/** + * i2c_smbus_read_word_data - SMBus "read word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read word" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_WORD_DATA, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_read_word_data); + +/** + * i2c_smbus_write_word_data - SMBus "write word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "write word" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, + u16 value) +{ + union i2c_smbus_data data; + data.word = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_word_data); + +/** + * i2c_smbus_read_block_data - SMBus "block read" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most 32 bytes. + * + * This executes the SMBus "block read" protocol, returning negative errno + * else the number of data bytes in the slave's response. + * + * Note that using this function requires that the client's adapter support + * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers + * support this; its emulation through I2C messaging relies on a specific + * mechanism (I2C_M_RECV_LEN) which may not be implemented. + */ +s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, + u8 *values) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data); + if (status) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_block_data); + +/** + * i2c_smbus_write_block_data - SMBus "block write" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most 32 bytes + * @values: Byte array which will be written. + * + * This executes the SMBus "block write" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(&data.block[1], values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_block_data); + +/* Returns the number of read bytes */ +s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, u8 *values) +{ + union i2c_smbus_data data; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (status < 0) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); + +s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); + +/* Simulate a SMBus command using the i2c protocol + No checking of parameters is done! */ +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + /* So we need to generate a series of msgs. In the case of writing, we + need to use only one message; when reading, we need two. We initialize + most things with sane defaults, to keep the code below somewhat + simpler. */ + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; + int num = read_write == I2C_SMBUS_READ ? 2 : 1; + int i; + u8 partial_pec = 0; + int status; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = flags, + .len = 1, + .buf = msgbuf0, + }, { + .addr = addr, + .flags = flags | I2C_M_RD, + .len = 0, + .buf = msgbuf1, + }, + }; + + msgbuf0[0] = command; + switch (size) { + case I2C_SMBUS_QUICK: + msg[0].len = 0; + /* Special case: The read/write field is used as data */ + msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? + I2C_M_RD : 0); + num = 1; + break; + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + /* Special case: only a read! */ + msg[0].flags = I2C_M_RD | flags; + num = 1; + } + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 1; + else { + msg[0].len = 2; + msgbuf0[1] = data->byte; + } + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 2; + else { + msg[0].len = 3; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + } + break; + case I2C_SMBUS_PROC_CALL: + num = 2; /* Special case */ + read_write = I2C_SMBUS_READ; + msg[0].len = 3; + msg[1].len = 2; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + } else { + msg[0].len = data->block[0] + 2; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + } + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + num = 2; /* Another special case */ + read_write = I2C_SMBUS_READ; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + msg[0].len = data->block[0] + 2; + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].len = data->block[0]; + } else { + msg[0].len = data->block[0] + 1; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i <= data->block[0]; i++) + msgbuf0[i] = data->block[i]; + } + break; + default: + dev_err(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + + status = i2c_transfer(adapter, msg, num); + if (status < 0) + return status; + + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); + if (status < 0) + return status; + } + + if (read_write == I2C_SMBUS_READ) + switch (size) { + case I2C_SMBUS_BYTE: + data->byte = msgbuf0[0]; + break; + case I2C_SMBUS_BYTE_DATA: + data->byte = msgbuf1[0]; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + data->word = msgbuf1[0] | (msgbuf1[1] << 8); + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < data->block[0]; i++) + data->block[i+1] = msgbuf1[i]; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + for (i = 0; i < msgbuf1[0] + 1; i++) + data->block[i] = msgbuf1[i]; + break; + } + return 0; +} + +/** + * i2c_smbus_xfer - execute SMBus protocol operations + * @adapter: Handle to I2C bus + * @addr: Address of SMBus slave on that bus + * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) + * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE + * @command: Byte interpreted by slave, for protocols which use such bytes + * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL + * @data: Data to be read or written + * + * This executes an SMBus protocol operation, and returns a negative + * errno code else zero on success. + */ +s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + union i2c_smbus_data *data) +{ + unsigned long orig_jiffies; + int try; + s32 res; + + /* If enabled, the following two tracepoints are conditional on + * read_write and protocol. + */ + trace_smbus_write(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_read(adapter, addr, flags, read_write, + command, protocol); + + flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; + + if (adapter->algo->smbus_xfer) { + i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); + + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= adapter->retries; try++) { + res = adapter->algo->smbus_xfer(adapter, addr, flags, + read_write, command, + protocol, data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + adapter->timeout)) + break; + } + i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); + + if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) + goto trace; + /* + * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't + * implement native support for the SMBus operation. + */ + } + + res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, + command, protocol, data); + +trace: + /* If enabled, the reply tracepoint is conditional on read_write. */ + trace_smbus_reply(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_result(adapter, addr, flags, read_write, + command, protocol, res); + + return res; +} +EXPORT_SYMBOL(i2c_smbus_xfer); + +/** + * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most + * I2C_SMBUS_BLOCK_MAX bytes. + * + * This executes the SMBus "block read" protocol if supported by the adapter. + * If block read is not supported, it emulates it using either word or byte + * read protocols depending on availability. + * + * The addresses of the I2C slave device that are accessed with this function + * must be mapped to a linear region, so that a block read will have the same + * effect as a byte read. Before using this function you must double-check + * if the I2C slave does support exchanging a block transfer with a byte + * transfer. + */ +s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, + u8 command, u8 length, u8 *values) +{ + u8 i = 0; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return i2c_smbus_read_i2c_block_data(client, command, length, values); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) + return -EOPNOTSUPP; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { + while ((i + 2) <= length) { + status = i2c_smbus_read_word_data(client, command + i); + if (status < 0) + return status; + values[i] = status & 0xff; + values[i + 1] = status >> 8; + i += 2; + } + } + + while (i < length) { + status = i2c_smbus_read_byte_data(client, command + i); + if (status < 0) + return status; + values[i] = status; + i++; + } + + return i; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h index 4abb8eab34d3..86a401190df9 100644 --- a/include/trace/events/i2c.h +++ b/include/trace/events/i2c.h @@ -1,4 +1,4 @@ -/* I2C and SMBUS message transfer tracepoints +/* I2C message transfer tracepoints * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -18,7 +18,7 @@ #include /* - * drivers/i2c/i2c-core.c + * drivers/i2c/i2c-core-base.c */ extern int i2c_transfer_trace_reg(void); extern void i2c_transfer_trace_unreg(void); @@ -144,228 +144,6 @@ TRACE_EVENT_FN(i2c_result, i2c_transfer_trace_reg, i2c_transfer_trace_unreg); -/* - * i2c_smbus_xfer() write data or procedure call request - */ -TRACE_EVENT_CONDITION(smbus_write, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - const union i2c_smbus_data *data), - TP_ARGS(adap, addr, flags, read_write, command, protocol, data), - TP_CONDITION(read_write == I2C_SMBUS_WRITE || - protocol == I2C_SMBUS_PROC_CALL || - protocol == I2C_SMBUS_BLOCK_PROC_CALL), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, command ) - __field(__u8, len ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - - switch (protocol) { - case I2C_SMBUS_BYTE_DATA: - __entry->len = 1; - goto copy; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - __entry->len = 2; - goto copy; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_I2C_BLOCK_DATA: - __entry->len = data->block[0] + 1; - copy: - memcpy(__entry->buf, data->block, __entry->len); - break; - case I2C_SMBUS_QUICK: - case I2C_SMBUS_BYTE: - case I2C_SMBUS_I2C_BLOCK_BROKEN: - default: - __entry->len = 0; - } - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->len, - __entry->len, __entry->buf - )); - -/* - * i2c_smbus_xfer() read data request - */ -TRACE_EVENT_CONDITION(smbus_read, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol), - TP_ARGS(adap, addr, flags, read_write, command, protocol), - TP_CONDITION(!(read_write == I2C_SMBUS_WRITE || - protocol == I2C_SMBUS_PROC_CALL || - protocol == I2C_SMBUS_BLOCK_PROC_CALL)), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, flags ) - __field(__u16, addr ) - __field(__u8, command ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }) - )); - -/* - * i2c_smbus_xfer() read data or procedure call reply - */ -TRACE_EVENT_CONDITION(smbus_reply, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - const union i2c_smbus_data *data), - TP_ARGS(adap, addr, flags, read_write, command, protocol, data), - TP_CONDITION(read_write == I2C_SMBUS_READ), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, command ) - __field(__u8, len ) - __field(__u32, protocol ) - __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->command = command; - __entry->protocol = protocol; - - switch (protocol) { - case I2C_SMBUS_BYTE: - case I2C_SMBUS_BYTE_DATA: - __entry->len = 1; - goto copy; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - __entry->len = 2; - goto copy; - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_I2C_BLOCK_DATA: - __entry->len = data->block[0] + 1; - copy: - memcpy(__entry->buf, data->block, __entry->len); - break; - case I2C_SMBUS_QUICK: - case I2C_SMBUS_I2C_BLOCK_BROKEN: - default: - __entry->len = 0; - } - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->len, - __entry->len, __entry->buf - )); - -/* - * i2c_smbus_xfer() result - */ -TRACE_EVENT(smbus_result, - TP_PROTO(const struct i2c_adapter *adap, - u16 addr, unsigned short flags, - char read_write, u8 command, int protocol, - int res), - TP_ARGS(adap, addr, flags, read_write, command, protocol, res), - TP_STRUCT__entry( - __field(int, adapter_nr ) - __field(__u16, addr ) - __field(__u16, flags ) - __field(__u8, read_write ) - __field(__u8, command ) - __field(__s16, res ) - __field(__u32, protocol ) - ), - TP_fast_assign( - __entry->adapter_nr = adap->nr; - __entry->addr = addr; - __entry->flags = flags; - __entry->read_write = read_write; - __entry->command = command; - __entry->protocol = protocol; - __entry->res = res; - ), - TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d", - __entry->adapter_nr, - __entry->addr, - __entry->flags, - __entry->command, - __print_symbolic(__entry->protocol, - { I2C_SMBUS_QUICK, "QUICK" }, - { I2C_SMBUS_BYTE, "BYTE" }, - { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, - { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, - { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, - { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, - { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, - { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, - { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), - __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd", - __entry->res - )); - #endif /* _TRACE_I2C_H */ /* This part must be outside protection */ diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h new file mode 100644 index 000000000000..d2fb6e1d3e10 --- /dev/null +++ b/include/trace/events/smbus.h @@ -0,0 +1,249 @@ +/* SMBUS message transfer tracepoints + * + * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM smbus + +#if !defined(_TRACE_SMBUS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SMBUS_H + +#include +#include + +/* + * drivers/i2c/i2c-core-smbus.c + */ + +/* + * i2c_smbus_xfer() write data or procedure call request + */ +TRACE_EVENT_CONDITION(smbus_write, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + const union i2c_smbus_data *data), + TP_ARGS(adap, addr, flags, read_write, command, protocol, data), + TP_CONDITION(read_write == I2C_SMBUS_WRITE || + protocol == I2C_SMBUS_PROC_CALL || + protocol == I2C_SMBUS_BLOCK_PROC_CALL), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, command ) + __field(__u8, len ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + + switch (protocol) { + case I2C_SMBUS_BYTE_DATA: + __entry->len = 1; + goto copy; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + __entry->len = 2; + goto copy; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + case I2C_SMBUS_I2C_BLOCK_DATA: + __entry->len = data->block[0] + 1; + copy: + memcpy(__entry->buf, data->block, __entry->len); + break; + case I2C_SMBUS_QUICK: + case I2C_SMBUS_BYTE: + case I2C_SMBUS_I2C_BLOCK_BROKEN: + default: + __entry->len = 0; + } + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->len, + __entry->len, __entry->buf + )); + +/* + * i2c_smbus_xfer() read data request + */ +TRACE_EVENT_CONDITION(smbus_read, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol), + TP_ARGS(adap, addr, flags, read_write, command, protocol), + TP_CONDITION(!(read_write == I2C_SMBUS_WRITE || + protocol == I2C_SMBUS_PROC_CALL || + protocol == I2C_SMBUS_BLOCK_PROC_CALL)), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, flags ) + __field(__u16, addr ) + __field(__u8, command ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }) + )); + +/* + * i2c_smbus_xfer() read data or procedure call reply + */ +TRACE_EVENT_CONDITION(smbus_reply, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + const union i2c_smbus_data *data), + TP_ARGS(adap, addr, flags, read_write, command, protocol, data), + TP_CONDITION(read_write == I2C_SMBUS_READ), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, command ) + __field(__u8, len ) + __field(__u32, protocol ) + __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->command = command; + __entry->protocol = protocol; + + switch (protocol) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + __entry->len = 1; + goto copy; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + __entry->len = 2; + goto copy; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + case I2C_SMBUS_I2C_BLOCK_DATA: + __entry->len = data->block[0] + 1; + copy: + memcpy(__entry->buf, data->block, __entry->len); + break; + case I2C_SMBUS_QUICK: + case I2C_SMBUS_I2C_BLOCK_BROKEN: + default: + __entry->len = 0; + } + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->len, + __entry->len, __entry->buf + )); + +/* + * i2c_smbus_xfer() result + */ +TRACE_EVENT(smbus_result, + TP_PROTO(const struct i2c_adapter *adap, + u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + int res), + TP_ARGS(adap, addr, flags, read_write, command, protocol, res), + TP_STRUCT__entry( + __field(int, adapter_nr ) + __field(__u16, addr ) + __field(__u16, flags ) + __field(__u8, read_write ) + __field(__u8, command ) + __field(__s16, res ) + __field(__u32, protocol ) + ), + TP_fast_assign( + __entry->adapter_nr = adap->nr; + __entry->addr = addr; + __entry->flags = flags; + __entry->read_write = read_write; + __entry->command = command; + __entry->protocol = protocol; + __entry->res = res; + ), + TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d", + __entry->adapter_nr, + __entry->addr, + __entry->flags, + __entry->command, + __print_symbolic(__entry->protocol, + { I2C_SMBUS_QUICK, "QUICK" }, + { I2C_SMBUS_BYTE, "BYTE" }, + { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" }, + { I2C_SMBUS_WORD_DATA, "WORD_DATA" }, + { I2C_SMBUS_PROC_CALL, "PROC_CALL" }, + { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" }, + { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" }, + { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" }, + { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }), + __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd", + __entry->res + )); + +#endif /* _TRACE_SMBUS_H */ + +/* This part must be outside protection */ +#include From 5bf4fa7daea6d5257357b613d0bb81c68e2d1af2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 11:50:58 +0200 Subject: [PATCH 04/51] i2c: break out OF support into separate file Also removes some ifdeffery. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/Makefile | 1 + drivers/i2c/i2c-core-base.c | 265 +--------------------------------- drivers/i2c/i2c-core-of.c | 276 ++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-core.h | 8 ++ 4 files changed, 286 insertions(+), 264 deletions(-) create mode 100644 drivers/i2c/i2c-core-of.c diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index a6a90fe2db88..189e0e6476f0 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o i2c-core-objs := i2c-core-base.o i2c-core-smbus.o i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o +i2c-core-$(CONFIG_OF) += i2c-core-of.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 70fc4624c69c..461451da1065 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -16,9 +16,6 @@ /* With some changes from Kyösti Mälkki . Mux support by Rodolfo Giometti and Michael Lawnick - OF support is copyright (c) 2008 Jochen Friedrich - (based on a previous patch from Jon Smirl ) and - (c) 2013 Wolfram Sang I2C ACPI code Copyright (C) 2014 Intel Corp Author: Lan Tianyu */ @@ -1191,7 +1188,7 @@ static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client) /* This is a permissive address validity check, I2C address map constraints * are purposely not enforced, except for the general call address. */ -static int i2c_check_addr_validity(unsigned addr, unsigned short flags) +int i2c_check_addr_validity(unsigned addr, unsigned short flags) { if (flags & I2C_CLIENT_TEN) { /* 10-bit address, all values are valid */ @@ -1760,210 +1757,6 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter) up_read(&__i2c_board_lock); } -/* OF support code */ - -#if IS_ENABLED(CONFIG_OF) -static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, - struct device_node *node) -{ - struct i2c_client *result; - struct i2c_board_info info = {}; - struct dev_archdata dev_ad = {}; - const __be32 *addr_be; - u32 addr; - int len; - - dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); - - if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { - dev_err(&adap->dev, "of_i2c: modalias failure on %s\n", - node->full_name); - return ERR_PTR(-EINVAL); - } - - addr_be = of_get_property(node, "reg", &len); - if (!addr_be || (len < sizeof(*addr_be))) { - dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", - node->full_name); - return ERR_PTR(-EINVAL); - } - - addr = be32_to_cpup(addr_be); - if (addr & I2C_TEN_BIT_ADDRESS) { - addr &= ~I2C_TEN_BIT_ADDRESS; - info.flags |= I2C_CLIENT_TEN; - } - - if (addr & I2C_OWN_SLAVE_ADDRESS) { - addr &= ~I2C_OWN_SLAVE_ADDRESS; - info.flags |= I2C_CLIENT_SLAVE; - } - - if (i2c_check_addr_validity(addr, info.flags)) { - dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", - addr, node->full_name); - return ERR_PTR(-EINVAL); - } - - info.addr = addr; - info.of_node = of_node_get(node); - info.archdata = &dev_ad; - - if (of_property_read_bool(node, "host-notify")) - info.flags |= I2C_CLIENT_HOST_NOTIFY; - - if (of_get_property(node, "wakeup-source", NULL)) - info.flags |= I2C_CLIENT_WAKE; - - result = i2c_new_device(adap, &info); - if (result == NULL) { - dev_err(&adap->dev, "of_i2c: Failure registering %s\n", - node->full_name); - of_node_put(node); - return ERR_PTR(-EINVAL); - } - return result; -} - -static void of_i2c_register_devices(struct i2c_adapter *adap) -{ - struct device_node *bus, *node; - struct i2c_client *client; - - /* Only register child devices if the adapter has a node pointer set */ - if (!adap->dev.of_node) - return; - - dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); - - bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus"); - if (!bus) - bus = of_node_get(adap->dev.of_node); - - for_each_available_child_of_node(bus, node) { - if (of_node_test_and_set_flag(node, OF_POPULATED)) - continue; - - client = of_i2c_register_device(adap, node); - if (IS_ERR(client)) { - dev_warn(&adap->dev, - "Failed to create I2C device for %s\n", - node->full_name); - of_node_clear_flag(node, OF_POPULATED); - } - } - - of_node_put(bus); -} - -static int of_dev_node_match(struct device *dev, void *data) -{ - return dev->of_node == data; -} - -/* must call put_device() when done with returned i2c_client device */ -struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) -{ - struct device *dev; - struct i2c_client *client; - - dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); - if (!dev) - return NULL; - - client = i2c_verify_client(dev); - if (!client) - put_device(dev); - - return client; -} -EXPORT_SYMBOL(of_find_i2c_device_by_node); - -/* must call put_device() when done with returned i2c_adapter device */ -struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) -{ - struct device *dev; - struct i2c_adapter *adapter; - - dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); - if (!dev) - return NULL; - - adapter = i2c_verify_adapter(dev); - if (!adapter) - put_device(dev); - - return adapter; -} -EXPORT_SYMBOL(of_find_i2c_adapter_by_node); - -/* must call i2c_put_adapter() when done with returned i2c_adapter device */ -struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) -{ - struct i2c_adapter *adapter; - - adapter = of_find_i2c_adapter_by_node(node); - if (!adapter) - return NULL; - - if (!try_module_get(adapter->owner)) { - put_device(&adapter->dev); - adapter = NULL; - } - - return adapter; -} -EXPORT_SYMBOL(of_get_i2c_adapter_by_node); - -static const struct of_device_id* -i2c_of_match_device_sysfs(const struct of_device_id *matches, - struct i2c_client *client) -{ - const char *name; - - for (; matches->compatible[0]; matches++) { - /* - * Adding devices through the i2c sysfs interface provides us - * a string to match which may be compatible with the device - * tree compatible strings, however with no actual of_node the - * of_match_device() will not match - */ - if (sysfs_streq(client->name, matches->compatible)) - return matches; - - name = strchr(matches->compatible, ','); - if (!name) - name = matches->compatible; - else - name++; - - if (sysfs_streq(client->name, name)) - return matches; - } - - return NULL; -} - -const struct of_device_id -*i2c_of_match_device(const struct of_device_id *matches, - struct i2c_client *client) -{ - const struct of_device_id *match; - - if (!(client && matches)) - return NULL; - - match = of_match_device(matches, &client->dev); - if (match) - return match; - - return i2c_of_match_device_sysfs(matches, client); -} -EXPORT_SYMBOL_GPL(i2c_of_match_device); -#else -static void of_i2c_register_devices(struct i2c_adapter *adap) { } -#endif /* CONFIG_OF */ - static int i2c_do_add_adapter(struct i2c_driver *driver, struct i2c_adapter *adap) { @@ -2558,62 +2351,6 @@ void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg) } EXPORT_SYMBOL(i2c_clients_command); -#if IS_ENABLED(CONFIG_OF_DYNAMIC) -static int of_i2c_notify(struct notifier_block *nb, unsigned long action, - void *arg) -{ - struct of_reconfig_data *rd = arg; - struct i2c_adapter *adap; - struct i2c_client *client; - - switch (of_reconfig_get_state_change(action, rd)) { - case OF_RECONFIG_CHANGE_ADD: - adap = of_find_i2c_adapter_by_node(rd->dn->parent); - if (adap == NULL) - return NOTIFY_OK; /* not for us */ - - if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { - put_device(&adap->dev); - return NOTIFY_OK; - } - - client = of_i2c_register_device(adap, rd->dn); - put_device(&adap->dev); - - if (IS_ERR(client)) { - dev_err(&adap->dev, "failed to create client for '%s'\n", - rd->dn->full_name); - of_node_clear_flag(rd->dn, OF_POPULATED); - return notifier_from_errno(PTR_ERR(client)); - } - break; - case OF_RECONFIG_CHANGE_REMOVE: - /* already depopulated? */ - if (!of_node_check_flag(rd->dn, OF_POPULATED)) - return NOTIFY_OK; - - /* find our device by node */ - client = of_find_i2c_device_by_node(rd->dn); - if (client == NULL) - return NOTIFY_OK; /* no? not meant for us */ - - /* unregister takes one ref away */ - i2c_unregister_device(client); - - /* and put the reference of the find */ - put_device(&client->dev); - break; - } - - return NOTIFY_OK; -} -static struct notifier_block i2c_of_notifier = { - .notifier_call = of_i2c_notify, -}; -#else -extern struct notifier_block i2c_of_notifier; -#endif /* CONFIG_OF_DYNAMIC */ - static int __init i2c_init(void) { int retval; diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c new file mode 100644 index 000000000000..ccf82fdbcd8e --- /dev/null +++ b/drivers/i2c/i2c-core-of.c @@ -0,0 +1,276 @@ +/* + * Linux I2C core OF support code + * + * Copyright (C) 2008 Jochen Friedrich + * based on a previous patch from Jon Smirl + * + * Copyright (C) 2013 Wolfram Sang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "i2c-core.h" + +static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, + struct device_node *node) +{ + struct i2c_client *result; + struct i2c_board_info info = {}; + struct dev_archdata dev_ad = {}; + const __be32 *addr_be; + u32 addr; + int len; + + dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); + + if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { + dev_err(&adap->dev, "of_i2c: modalias failure on %s\n", + node->full_name); + return ERR_PTR(-EINVAL); + } + + addr_be = of_get_property(node, "reg", &len); + if (!addr_be || (len < sizeof(*addr_be))) { + dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", + node->full_name); + return ERR_PTR(-EINVAL); + } + + addr = be32_to_cpup(addr_be); + if (addr & I2C_TEN_BIT_ADDRESS) { + addr &= ~I2C_TEN_BIT_ADDRESS; + info.flags |= I2C_CLIENT_TEN; + } + + if (addr & I2C_OWN_SLAVE_ADDRESS) { + addr &= ~I2C_OWN_SLAVE_ADDRESS; + info.flags |= I2C_CLIENT_SLAVE; + } + + if (i2c_check_addr_validity(addr, info.flags)) { + dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", + addr, node->full_name); + return ERR_PTR(-EINVAL); + } + + info.addr = addr; + info.of_node = of_node_get(node); + info.archdata = &dev_ad; + + if (of_property_read_bool(node, "host-notify")) + info.flags |= I2C_CLIENT_HOST_NOTIFY; + + if (of_get_property(node, "wakeup-source", NULL)) + info.flags |= I2C_CLIENT_WAKE; + + result = i2c_new_device(adap, &info); + if (result == NULL) { + dev_err(&adap->dev, "of_i2c: Failure registering %s\n", + node->full_name); + of_node_put(node); + return ERR_PTR(-EINVAL); + } + return result; +} + +void of_i2c_register_devices(struct i2c_adapter *adap) +{ + struct device_node *bus, *node; + struct i2c_client *client; + + /* Only register child devices if the adapter has a node pointer set */ + if (!adap->dev.of_node) + return; + + dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); + + bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus"); + if (!bus) + bus = of_node_get(adap->dev.of_node); + + for_each_available_child_of_node(bus, node) { + if (of_node_test_and_set_flag(node, OF_POPULATED)) + continue; + + client = of_i2c_register_device(adap, node); + if (IS_ERR(client)) { + dev_warn(&adap->dev, + "Failed to create I2C device for %s\n", + node->full_name); + of_node_clear_flag(node, OF_POPULATED); + } + } + + of_node_put(bus); +} + +static int of_dev_node_match(struct device *dev, void *data) +{ + return dev->of_node == data; +} + +/* must call put_device() when done with returned i2c_client device */ +struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) +{ + struct device *dev; + struct i2c_client *client; + + dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); + if (!dev) + return NULL; + + client = i2c_verify_client(dev); + if (!client) + put_device(dev); + + return client; +} +EXPORT_SYMBOL(of_find_i2c_device_by_node); + +/* must call put_device() when done with returned i2c_adapter device */ +struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) +{ + struct device *dev; + struct i2c_adapter *adapter; + + dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); + if (!dev) + return NULL; + + adapter = i2c_verify_adapter(dev); + if (!adapter) + put_device(dev); + + return adapter; +} +EXPORT_SYMBOL(of_find_i2c_adapter_by_node); + +/* must call i2c_put_adapter() when done with returned i2c_adapter device */ +struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) +{ + struct i2c_adapter *adapter; + + adapter = of_find_i2c_adapter_by_node(node); + if (!adapter) + return NULL; + + if (!try_module_get(adapter->owner)) { + put_device(&adapter->dev); + adapter = NULL; + } + + return adapter; +} +EXPORT_SYMBOL(of_get_i2c_adapter_by_node); + +static const struct of_device_id* +i2c_of_match_device_sysfs(const struct of_device_id *matches, + struct i2c_client *client) +{ + const char *name; + + for (; matches->compatible[0]; matches++) { + /* + * Adding devices through the i2c sysfs interface provides us + * a string to match which may be compatible with the device + * tree compatible strings, however with no actual of_node the + * of_match_device() will not match + */ + if (sysfs_streq(client->name, matches->compatible)) + return matches; + + name = strchr(matches->compatible, ','); + if (!name) + name = matches->compatible; + else + name++; + + if (sysfs_streq(client->name, name)) + return matches; + } + + return NULL; +} + +const struct of_device_id +*i2c_of_match_device(const struct of_device_id *matches, + struct i2c_client *client) +{ + const struct of_device_id *match; + + if (!(client && matches)) + return NULL; + + match = of_match_device(matches, &client->dev); + if (match) + return match; + + return i2c_of_match_device_sysfs(matches, client); +} +EXPORT_SYMBOL_GPL(i2c_of_match_device); + +#if IS_ENABLED(CONFIG_OF_DYNAMIC) +static int of_i2c_notify(struct notifier_block *nb, unsigned long action, + void *arg) +{ + struct of_reconfig_data *rd = arg; + struct i2c_adapter *adap; + struct i2c_client *client; + + switch (of_reconfig_get_state_change(action, rd)) { + case OF_RECONFIG_CHANGE_ADD: + adap = of_find_i2c_adapter_by_node(rd->dn->parent); + if (adap == NULL) + return NOTIFY_OK; /* not for us */ + + if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { + put_device(&adap->dev); + return NOTIFY_OK; + } + + client = of_i2c_register_device(adap, rd->dn); + put_device(&adap->dev); + + if (IS_ERR(client)) { + dev_err(&adap->dev, "failed to create client for '%s'\n", + rd->dn->full_name); + of_node_clear_flag(rd->dn, OF_POPULATED); + return notifier_from_errno(PTR_ERR(client)); + } + break; + case OF_RECONFIG_CHANGE_REMOVE: + /* already depopulated? */ + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + + /* find our device by node */ + client = of_find_i2c_device_by_node(rd->dn); + if (client == NULL) + return NOTIFY_OK; /* no? not meant for us */ + + /* unregister takes one ref away */ + i2c_unregister_device(client); + + /* and put the reference of the find */ + put_device(&client->dev); + break; + } + + return NOTIFY_OK; +} + +struct notifier_block i2c_of_notifier = { + .notifier_call = of_i2c_notify, +}; +#endif /* CONFIG_OF_DYNAMIC */ diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 77c22b03ff95..22151c88e885 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -27,4 +27,12 @@ extern struct rw_semaphore __i2c_board_lock; extern struct list_head __i2c_board_list; extern int __i2c_first_dynamic_bus_num; +int i2c_check_addr_validity(unsigned addr, unsigned short flags); int i2c_check_7bit_addr_validity_strict(unsigned short addr); + +#ifdef CONFIG_OF +void of_i2c_register_devices(struct i2c_adapter *adap); +#else +static inline void of_i2c_register_devices(struct i2c_adapter *adap) { } +#endif +extern struct notifier_block i2c_of_notifier; From 53f8f7c5cf145d639ebd6d13cfdf2e3e9764add3 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 16:22:23 +0200 Subject: [PATCH 05/51] i2c: break out ACPI support into separate file Removes some ifdeffery. Also add the new file to the relevant MAINTAINERS section. Reviewed-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- MAINTAINERS | 1 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-core-acpi.c | 653 ++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-core-base.c | 648 ----------------------------------- drivers/i2c/i2c-core.h | 15 + 5 files changed, 670 insertions(+), 648 deletions(-) create mode 100644 drivers/i2c/i2c-core-acpi.c diff --git a/MAINTAINERS b/MAINTAINERS index 053c3bdd1fe5..34b0324d53c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6273,6 +6273,7 @@ M: Mika Westerberg L: linux-i2c@vger.kernel.org L: linux-acpi@vger.kernel.org S: Maintained +F: drivers/i2c/i2c-core-acpi.c I2C-TAOS-EVM DRIVER M: Jean Delvare diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 189e0e6476f0..7bb65a4369e1 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o i2c-core-objs := i2c-core-base.o i2c-core-smbus.o +i2c-core-$(CONFIG_ACPI) += i2c-core-acpi.o i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o i2c-core-$(CONFIG_OF) += i2c-core-of.o diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c new file mode 100644 index 000000000000..052005579ed6 --- /dev/null +++ b/drivers/i2c/i2c-core-acpi.c @@ -0,0 +1,653 @@ +/* + * Linux I2C core ACPI support code + * + * Copyright (C) 2014 Intel Corp, Author: Lan Tianyu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "i2c-core.h" + +struct i2c_acpi_handler_data { + struct acpi_connection_info info; + struct i2c_adapter *adapter; +}; + +struct gsb_buffer { + u8 status; + u8 len; + union { + u16 wdata; + u8 bdata; + u8 data[0]; + }; +} __packed; + +struct i2c_acpi_lookup { + struct i2c_board_info *info; + acpi_handle adapter_handle; + acpi_handle device_handle; + acpi_handle search_handle; + int n; + int index; + u32 speed; + u32 min_speed; +}; + +static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data) +{ + struct i2c_acpi_lookup *lookup = data; + struct i2c_board_info *info = lookup->info; + struct acpi_resource_i2c_serialbus *sb; + acpi_status status; + + if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) + return 1; + + sb = &ares->data.i2c_serial_bus; + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) + return 1; + + if (lookup->index != -1 && lookup->n++ != lookup->index) + return 1; + + status = acpi_get_handle(lookup->device_handle, + sb->resource_source.string_ptr, + &lookup->adapter_handle); + if (!ACPI_SUCCESS(status)) + return 1; + + info->addr = sb->slave_address; + lookup->speed = sb->connection_speed; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; + + return 1; +} + +static int i2c_acpi_do_lookup(struct acpi_device *adev, + struct i2c_acpi_lookup *lookup) +{ + struct i2c_board_info *info = lookup->info; + struct list_head resource_list; + int ret; + + if (acpi_bus_get_status(adev) || !adev->status.present || + acpi_device_enumerated(adev)) + return -EINVAL; + + memset(info, 0, sizeof(*info)); + lookup->device_handle = acpi_device_handle(adev); + + /* Look up for I2cSerialBus resource */ + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, + i2c_acpi_fill_info, lookup); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0 || !info->addr) + return -EINVAL; + + return 0; +} + +static int i2c_acpi_get_info(struct acpi_device *adev, + struct i2c_board_info *info, + struct i2c_adapter *adapter, + acpi_handle *adapter_handle) +{ + struct list_head resource_list; + struct resource_entry *entry; + struct i2c_acpi_lookup lookup; + int ret; + + memset(&lookup, 0, sizeof(lookup)); + lookup.info = info; + lookup.index = -1; + + ret = i2c_acpi_do_lookup(adev, &lookup); + if (ret) + return ret; + + if (adapter) { + /* The adapter must match the one in I2cSerialBus() connector */ + if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle) + return -ENODEV; + } else { + struct acpi_device *adapter_adev; + + /* The adapter must be present */ + if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev)) + return -ENODEV; + if (acpi_bus_get_status(adapter_adev) || + !adapter_adev->status.present) + return -ENODEV; + } + + info->fwnode = acpi_fwnode_handle(adev); + if (adapter_handle) + *adapter_handle = lookup.adapter_handle; + + /* Then fill IRQ number if any */ + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret < 0) + return -EINVAL; + + resource_list_for_each_entry(entry, &resource_list) { + if (resource_type(entry->res) == IORESOURCE_IRQ) { + info->irq = entry->res->start; + break; + } + } + + acpi_dev_free_resource_list(&resource_list); + + acpi_set_modalias(adev, dev_name(&adev->dev), info->type, + sizeof(info->type)); + + return 0; +} + +static void i2c_acpi_register_device(struct i2c_adapter *adapter, + struct acpi_device *adev, + struct i2c_board_info *info) +{ + adev->power.flags.ignore_parent = true; + acpi_device_set_enumerated(adev); + + if (!i2c_new_device(adapter, info)) { + adev->power.flags.ignore_parent = false; + dev_err(&adapter->dev, + "failed to add I2C device %s from ACPI\n", + dev_name(&adev->dev)); + } +} + +static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_adapter *adapter = data; + struct acpi_device *adev; + struct i2c_board_info info; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + if (i2c_acpi_get_info(adev, &info, adapter, NULL)) + return AE_OK; + + i2c_acpi_register_device(adapter, adev, &info); + + return AE_OK; +} + +#define I2C_ACPI_MAX_SCAN_DEPTH 32 + +/** + * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter + * @adap: pointer to adapter + * + * Enumerate all I2C slave devices behind this adapter by walking the ACPI + * namespace. When a device is found it will be added to the Linux device + * model and bound to the corresponding ACPI handle. + */ +void i2c_acpi_register_devices(struct i2c_adapter *adap) +{ + acpi_status status; + + if (!has_acpi_companion(&adap->dev)) + return; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + I2C_ACPI_MAX_SCAN_DEPTH, + i2c_acpi_add_device, NULL, + adap, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); +} + +static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_acpi_lookup *lookup = data; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + if (i2c_acpi_do_lookup(adev, lookup)) + return AE_OK; + + if (lookup->search_handle != lookup->adapter_handle) + return AE_OK; + + if (lookup->speed <= lookup->min_speed) + lookup->min_speed = lookup->speed; + + return AE_OK; +} + +/** + * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI + * @dev: The device owning the bus + * + * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves + * devices connected to this bus and use the speed of slowest device. + * + * Returns the speed in Hz or zero + */ +u32 i2c_acpi_find_bus_speed(struct device *dev) +{ + struct i2c_acpi_lookup lookup; + struct i2c_board_info dummy; + acpi_status status; + + if (!has_acpi_companion(dev)) + return 0; + + memset(&lookup, 0, sizeof(lookup)); + lookup.search_handle = ACPI_HANDLE(dev); + lookup.min_speed = UINT_MAX; + lookup.info = &dummy; + lookup.index = -1; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + I2C_ACPI_MAX_SCAN_DEPTH, + i2c_acpi_lookup_speed, NULL, + &lookup, NULL); + + if (ACPI_FAILURE(status)) { + dev_warn(dev, "unable to find I2C bus speed from ACPI\n"); + return 0; + } + + return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0; +} +EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed); + +static int i2c_acpi_match_adapter(struct device *dev, void *data) +{ + struct i2c_adapter *adapter = i2c_verify_adapter(dev); + + if (!adapter) + return 0; + + return ACPI_HANDLE(dev) == (acpi_handle)data; +} + +static int i2c_acpi_match_device(struct device *dev, void *data) +{ + return ACPI_COMPANION(dev) == data; +} + +static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, handle, + i2c_acpi_match_adapter); + return dev ? i2c_verify_adapter(dev) : NULL; +} + +static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device); + return dev ? i2c_verify_client(dev) : NULL; +} + +static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, + void *arg) +{ + struct acpi_device *adev = arg; + struct i2c_board_info info; + acpi_handle adapter_handle; + struct i2c_adapter *adapter; + struct i2c_client *client; + + switch (value) { + case ACPI_RECONFIG_DEVICE_ADD: + if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle)) + break; + + adapter = i2c_acpi_find_adapter_by_handle(adapter_handle); + if (!adapter) + break; + + i2c_acpi_register_device(adapter, adev, &info); + break; + case ACPI_RECONFIG_DEVICE_REMOVE: + if (!acpi_device_enumerated(adev)) + break; + + client = i2c_acpi_find_client_by_adev(adev); + if (!client) + break; + + i2c_unregister_device(client); + put_device(&client->dev); + break; + } + + return NOTIFY_OK; +} + +struct notifier_block i2c_acpi_notifier = { + .notifier_call = i2c_acpi_notify, +}; + +/** + * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource + * @dev: Device owning the ACPI resources to get the client from + * @index: Index of ACPI resource to get + * @info: describes the I2C device; note this is modified (addr gets set) + * Context: can sleep + * + * By default the i2c subsys creates an i2c-client for the first I2cSerialBus + * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus + * resources, in that case this function can be used to create an i2c-client + * for other I2cSerialBus resources in the Current Resource Settings table. + * + * Also see i2c_new_device, which this function calls to create the i2c-client. + * + * Returns a pointer to the new i2c-client, or NULL if the adapter is not found. + */ +struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, + struct i2c_board_info *info) +{ + struct i2c_acpi_lookup lookup; + struct i2c_adapter *adapter; + struct acpi_device *adev; + LIST_HEAD(resource_list); + int ret; + + adev = ACPI_COMPANION(dev); + if (!adev) + return NULL; + + memset(&lookup, 0, sizeof(lookup)); + lookup.info = info; + lookup.device_handle = acpi_device_handle(adev); + lookup.index = index; + + ret = acpi_dev_get_resources(adev, &resource_list, + i2c_acpi_fill_info, &lookup); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0 || !info->addr) + return NULL; + + adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle); + if (!adapter) + return NULL; + + return i2c_new_device(adapter, info); +} +EXPORT_SYMBOL_GPL(i2c_acpi_new_device); + +#ifdef CONFIG_ACPI_I2C_OPREGION +static int acpi_gsb_i2c_read_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[2]; + int ret; + u8 *buffer; + + buffer = kzalloc(data_len, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = 1; + msgs[0].buf = &cmd; + + msgs[1].addr = client->addr; + msgs[1].flags = client->flags | I2C_M_RD; + msgs[1].len = data_len; + msgs[1].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c read failed\n"); + else + memcpy(data, buffer, data_len); + + kfree(buffer); + return ret; +} + +static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[1]; + u8 *buffer; + int ret = AE_OK; + + buffer = kzalloc(data_len + 1, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + buffer[0] = cmd; + memcpy(buffer + 1, data, data_len); + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = data_len + 1; + msgs[0].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c write failed\n"); + + kfree(buffer); + return ret; +} + +static acpi_status +i2c_acpi_space_handler(u32 function, acpi_physical_address command, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct gsb_buffer *gsb = (struct gsb_buffer *)value64; + struct i2c_acpi_handler_data *data = handler_context; + struct acpi_connection_info *info = &data->info; + struct acpi_resource_i2c_serialbus *sb; + struct i2c_adapter *adapter = data->adapter; + struct i2c_client *client; + struct acpi_resource *ares; + u32 accessor_type = function >> 16; + u8 action = function & ACPI_IO_MASK; + acpi_status ret; + int status; + + ret = acpi_buffer_to_resource(info->connection, info->length, &ares); + if (ACPI_FAILURE(ret)) + return ret; + + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (!client) { + ret = AE_NO_MEMORY; + goto err; + } + + if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { + ret = AE_BAD_PARAMETER; + goto err; + } + + sb = &ares->data.i2c_serial_bus; + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { + ret = AE_BAD_PARAMETER; + goto err; + } + + client->adapter = adapter; + client->addr = sb->slave_address; + + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + client->flags |= I2C_CLIENT_TEN; + + switch (accessor_type) { + case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte(client); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte(client, gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BYTE: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte_data(client, command); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte_data(client, command, + gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_WORD: + if (action == ACPI_READ) { + status = i2c_smbus_read_word_data(client, command); + if (status >= 0) { + gsb->wdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_word_data(client, command, + gsb->wdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BLOCK: + if (action == ACPI_READ) { + status = i2c_smbus_read_block_data(client, command, + gsb->data); + if (status >= 0) { + gsb->len = status; + status = 0; + } + } else { + status = i2c_smbus_write_block_data(client, command, + gsb->len, gsb->data); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE: + if (action == ACPI_READ) { + status = acpi_gsb_i2c_read_bytes(client, command, + gsb->data, info->access_length); + if (status > 0) + status = 0; + } else { + status = acpi_gsb_i2c_write_bytes(client, command, + gsb->data, info->access_length); + } + break; + + default: + dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n", + accessor_type, client->addr); + ret = AE_BAD_PARAMETER; + goto err; + } + + gsb->status = status; + + err: + kfree(client); + ACPI_FREE(ares); + return ret; +} + + +int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct i2c_acpi_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return -ENODEV; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return -ENODEV; + + data = kzalloc(sizeof(struct i2c_acpi_handler_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->adapter = adapter; + status = acpi_bus_attach_private_data(handle, (void *)data); + if (ACPI_FAILURE(status)) { + kfree(data); + return -ENOMEM; + } + + status = acpi_install_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &i2c_acpi_space_handler, + NULL, + data); + if (ACPI_FAILURE(status)) { + dev_err(&adapter->dev, "Error installing i2c space handler\n"); + acpi_bus_detach_private_data(handle); + kfree(data); + return -ENOMEM; + } + + acpi_walk_dep_device_list(handle); + return 0; +} + +void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct i2c_acpi_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return; + + acpi_remove_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &i2c_acpi_space_handler); + + status = acpi_bus_get_private_data(handle, (void **)&data); + if (ACPI_SUCCESS(status)) + kfree(data); + + acpi_bus_detach_private_data(handle); +} +#endif /* CONFIG_ACPI_I2C_OPREGION */ diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 461451da1065..ac7b95e4cda7 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -16,8 +16,6 @@ /* With some changes from Kyösti Mälkki . Mux support by Rodolfo Giometti and Michael Lawnick - I2C ACPI code Copyright (C) 2014 Intel Corp - Author: Lan Tianyu */ #define pr_fmt(fmt) "i2c-core: " fmt @@ -83,652 +81,6 @@ void i2c_transfer_trace_unreg(void) static_key_slow_dec(&i2c_trace_msg); } -#if defined(CONFIG_ACPI) -struct i2c_acpi_handler_data { - struct acpi_connection_info info; - struct i2c_adapter *adapter; -}; - -struct gsb_buffer { - u8 status; - u8 len; - union { - u16 wdata; - u8 bdata; - u8 data[0]; - }; -} __packed; - -struct i2c_acpi_lookup { - struct i2c_board_info *info; - acpi_handle adapter_handle; - acpi_handle device_handle; - acpi_handle search_handle; - int n; - int index; - u32 speed; - u32 min_speed; -}; - -static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data) -{ - struct i2c_acpi_lookup *lookup = data; - struct i2c_board_info *info = lookup->info; - struct acpi_resource_i2c_serialbus *sb; - acpi_status status; - - if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) - return 1; - - sb = &ares->data.i2c_serial_bus; - if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) - return 1; - - if (lookup->index != -1 && lookup->n++ != lookup->index) - return 1; - - status = acpi_get_handle(lookup->device_handle, - sb->resource_source.string_ptr, - &lookup->adapter_handle); - if (!ACPI_SUCCESS(status)) - return 1; - - info->addr = sb->slave_address; - lookup->speed = sb->connection_speed; - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - info->flags |= I2C_CLIENT_TEN; - - return 1; -} - -static int i2c_acpi_do_lookup(struct acpi_device *adev, - struct i2c_acpi_lookup *lookup) -{ - struct i2c_board_info *info = lookup->info; - struct list_head resource_list; - int ret; - - if (acpi_bus_get_status(adev) || !adev->status.present || - acpi_device_enumerated(adev)) - return -EINVAL; - - memset(info, 0, sizeof(*info)); - lookup->device_handle = acpi_device_handle(adev); - - /* Look up for I2cSerialBus resource */ - INIT_LIST_HEAD(&resource_list); - ret = acpi_dev_get_resources(adev, &resource_list, - i2c_acpi_fill_info, lookup); - acpi_dev_free_resource_list(&resource_list); - - if (ret < 0 || !info->addr) - return -EINVAL; - - return 0; -} - -static int i2c_acpi_get_info(struct acpi_device *adev, - struct i2c_board_info *info, - struct i2c_adapter *adapter, - acpi_handle *adapter_handle) -{ - struct list_head resource_list; - struct resource_entry *entry; - struct i2c_acpi_lookup lookup; - int ret; - - memset(&lookup, 0, sizeof(lookup)); - lookup.info = info; - lookup.index = -1; - - ret = i2c_acpi_do_lookup(adev, &lookup); - if (ret) - return ret; - - if (adapter) { - /* The adapter must match the one in I2cSerialBus() connector */ - if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle) - return -ENODEV; - } else { - struct acpi_device *adapter_adev; - - /* The adapter must be present */ - if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev)) - return -ENODEV; - if (acpi_bus_get_status(adapter_adev) || - !adapter_adev->status.present) - return -ENODEV; - } - - info->fwnode = acpi_fwnode_handle(adev); - if (adapter_handle) - *adapter_handle = lookup.adapter_handle; - - /* Then fill IRQ number if any */ - INIT_LIST_HEAD(&resource_list); - ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); - if (ret < 0) - return -EINVAL; - - resource_list_for_each_entry(entry, &resource_list) { - if (resource_type(entry->res) == IORESOURCE_IRQ) { - info->irq = entry->res->start; - break; - } - } - - acpi_dev_free_resource_list(&resource_list); - - acpi_set_modalias(adev, dev_name(&adev->dev), info->type, - sizeof(info->type)); - - return 0; -} - -static void i2c_acpi_register_device(struct i2c_adapter *adapter, - struct acpi_device *adev, - struct i2c_board_info *info) -{ - adev->power.flags.ignore_parent = true; - acpi_device_set_enumerated(adev); - - if (!i2c_new_device(adapter, info)) { - adev->power.flags.ignore_parent = false; - dev_err(&adapter->dev, - "failed to add I2C device %s from ACPI\n", - dev_name(&adev->dev)); - } -} - -static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level, - void *data, void **return_value) -{ - struct i2c_adapter *adapter = data; - struct acpi_device *adev; - struct i2c_board_info info; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (i2c_acpi_get_info(adev, &info, adapter, NULL)) - return AE_OK; - - i2c_acpi_register_device(adapter, adev, &info); - - return AE_OK; -} - -#define I2C_ACPI_MAX_SCAN_DEPTH 32 - -/** - * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter - * @adap: pointer to adapter - * - * Enumerate all I2C slave devices behind this adapter by walking the ACPI - * namespace. When a device is found it will be added to the Linux device - * model and bound to the corresponding ACPI handle. - */ -static void i2c_acpi_register_devices(struct i2c_adapter *adap) -{ - acpi_status status; - - if (!has_acpi_companion(&adap->dev)) - return; - - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - I2C_ACPI_MAX_SCAN_DEPTH, - i2c_acpi_add_device, NULL, - adap, NULL); - if (ACPI_FAILURE(status)) - dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); -} - -static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, - void *data, void **return_value) -{ - struct i2c_acpi_lookup *lookup = data; - struct acpi_device *adev; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (i2c_acpi_do_lookup(adev, lookup)) - return AE_OK; - - if (lookup->search_handle != lookup->adapter_handle) - return AE_OK; - - if (lookup->speed <= lookup->min_speed) - lookup->min_speed = lookup->speed; - - return AE_OK; -} - -/** - * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI - * @dev: The device owning the bus - * - * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves - * devices connected to this bus and use the speed of slowest device. - * - * Returns the speed in Hz or zero - */ -u32 i2c_acpi_find_bus_speed(struct device *dev) -{ - struct i2c_acpi_lookup lookup; - struct i2c_board_info dummy; - acpi_status status; - - if (!has_acpi_companion(dev)) - return 0; - - memset(&lookup, 0, sizeof(lookup)); - lookup.search_handle = ACPI_HANDLE(dev); - lookup.min_speed = UINT_MAX; - lookup.info = &dummy; - lookup.index = -1; - - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - I2C_ACPI_MAX_SCAN_DEPTH, - i2c_acpi_lookup_speed, NULL, - &lookup, NULL); - - if (ACPI_FAILURE(status)) { - dev_warn(dev, "unable to find I2C bus speed from ACPI\n"); - return 0; - } - - return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0; -} -EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed); - -static int i2c_acpi_match_adapter(struct device *dev, void *data) -{ - struct i2c_adapter *adapter = i2c_verify_adapter(dev); - - if (!adapter) - return 0; - - return ACPI_HANDLE(dev) == (acpi_handle)data; -} - -static int i2c_acpi_match_device(struct device *dev, void *data) -{ - return ACPI_COMPANION(dev) == data; -} - -static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle) -{ - struct device *dev; - - dev = bus_find_device(&i2c_bus_type, NULL, handle, - i2c_acpi_match_adapter); - return dev ? i2c_verify_adapter(dev) : NULL; -} - -static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) -{ - struct device *dev; - - dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device); - return dev ? i2c_verify_client(dev) : NULL; -} - -static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, - void *arg) -{ - struct acpi_device *adev = arg; - struct i2c_board_info info; - acpi_handle adapter_handle; - struct i2c_adapter *adapter; - struct i2c_client *client; - - switch (value) { - case ACPI_RECONFIG_DEVICE_ADD: - if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle)) - break; - - adapter = i2c_acpi_find_adapter_by_handle(adapter_handle); - if (!adapter) - break; - - i2c_acpi_register_device(adapter, adev, &info); - break; - case ACPI_RECONFIG_DEVICE_REMOVE: - if (!acpi_device_enumerated(adev)) - break; - - client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; - - i2c_unregister_device(client); - put_device(&client->dev); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block i2c_acpi_notifier = { - .notifier_call = i2c_acpi_notify, -}; - -/** - * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource - * @dev: Device owning the ACPI resources to get the client from - * @index: Index of ACPI resource to get - * @info: describes the I2C device; note this is modified (addr gets set) - * Context: can sleep - * - * By default the i2c subsys creates an i2c-client for the first I2cSerialBus - * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus - * resources, in that case this function can be used to create an i2c-client - * for other I2cSerialBus resources in the Current Resource Settings table. - * - * Also see i2c_new_device, which this function calls to create the i2c-client. - * - * Returns a pointer to the new i2c-client, or NULL if the adapter is not found. - */ -struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, - struct i2c_board_info *info) -{ - struct i2c_acpi_lookup lookup; - struct i2c_adapter *adapter; - struct acpi_device *adev; - LIST_HEAD(resource_list); - int ret; - - adev = ACPI_COMPANION(dev); - if (!adev) - return NULL; - - memset(&lookup, 0, sizeof(lookup)); - lookup.info = info; - lookup.device_handle = acpi_device_handle(adev); - lookup.index = index; - - ret = acpi_dev_get_resources(adev, &resource_list, - i2c_acpi_fill_info, &lookup); - acpi_dev_free_resource_list(&resource_list); - - if (ret < 0 || !info->addr) - return NULL; - - adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle); - if (!adapter) - return NULL; - - return i2c_new_device(adapter, info); -} -EXPORT_SYMBOL_GPL(i2c_acpi_new_device); -#else /* CONFIG_ACPI */ -static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { } -extern struct notifier_block i2c_acpi_notifier; -#endif /* CONFIG_ACPI */ - -#ifdef CONFIG_ACPI_I2C_OPREGION -static int acpi_gsb_i2c_read_bytes(struct i2c_client *client, - u8 cmd, u8 *data, u8 data_len) -{ - - struct i2c_msg msgs[2]; - int ret; - u8 *buffer; - - buffer = kzalloc(data_len, GFP_KERNEL); - if (!buffer) - return AE_NO_MEMORY; - - msgs[0].addr = client->addr; - msgs[0].flags = client->flags; - msgs[0].len = 1; - msgs[0].buf = &cmd; - - msgs[1].addr = client->addr; - msgs[1].flags = client->flags | I2C_M_RD; - msgs[1].len = data_len; - msgs[1].buf = buffer; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret < 0) - dev_err(&client->adapter->dev, "i2c read failed\n"); - else - memcpy(data, buffer, data_len); - - kfree(buffer); - return ret; -} - -static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, - u8 cmd, u8 *data, u8 data_len) -{ - - struct i2c_msg msgs[1]; - u8 *buffer; - int ret = AE_OK; - - buffer = kzalloc(data_len + 1, GFP_KERNEL); - if (!buffer) - return AE_NO_MEMORY; - - buffer[0] = cmd; - memcpy(buffer + 1, data, data_len); - - msgs[0].addr = client->addr; - msgs[0].flags = client->flags; - msgs[0].len = data_len + 1; - msgs[0].buf = buffer; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret < 0) - dev_err(&client->adapter->dev, "i2c write failed\n"); - - kfree(buffer); - return ret; -} - -static acpi_status -i2c_acpi_space_handler(u32 function, acpi_physical_address command, - u32 bits, u64 *value64, - void *handler_context, void *region_context) -{ - struct gsb_buffer *gsb = (struct gsb_buffer *)value64; - struct i2c_acpi_handler_data *data = handler_context; - struct acpi_connection_info *info = &data->info; - struct acpi_resource_i2c_serialbus *sb; - struct i2c_adapter *adapter = data->adapter; - struct i2c_client *client; - struct acpi_resource *ares; - u32 accessor_type = function >> 16; - u8 action = function & ACPI_IO_MASK; - acpi_status ret; - int status; - - ret = acpi_buffer_to_resource(info->connection, info->length, &ares); - if (ACPI_FAILURE(ret)) - return ret; - - client = kzalloc(sizeof(*client), GFP_KERNEL); - if (!client) { - ret = AE_NO_MEMORY; - goto err; - } - - if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { - ret = AE_BAD_PARAMETER; - goto err; - } - - sb = &ares->data.i2c_serial_bus; - if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { - ret = AE_BAD_PARAMETER; - goto err; - } - - client->adapter = adapter; - client->addr = sb->slave_address; - - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - client->flags |= I2C_CLIENT_TEN; - - switch (accessor_type) { - case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV: - if (action == ACPI_READ) { - status = i2c_smbus_read_byte(client); - if (status >= 0) { - gsb->bdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_byte(client, gsb->bdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_BYTE: - if (action == ACPI_READ) { - status = i2c_smbus_read_byte_data(client, command); - if (status >= 0) { - gsb->bdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_byte_data(client, command, - gsb->bdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_WORD: - if (action == ACPI_READ) { - status = i2c_smbus_read_word_data(client, command); - if (status >= 0) { - gsb->wdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_word_data(client, command, - gsb->wdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_BLOCK: - if (action == ACPI_READ) { - status = i2c_smbus_read_block_data(client, command, - gsb->data); - if (status >= 0) { - gsb->len = status; - status = 0; - } - } else { - status = i2c_smbus_write_block_data(client, command, - gsb->len, gsb->data); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE: - if (action == ACPI_READ) { - status = acpi_gsb_i2c_read_bytes(client, command, - gsb->data, info->access_length); - if (status > 0) - status = 0; - } else { - status = acpi_gsb_i2c_write_bytes(client, command, - gsb->data, info->access_length); - } - break; - - default: - dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n", - accessor_type, client->addr); - ret = AE_BAD_PARAMETER; - goto err; - } - - gsb->status = status; - - err: - kfree(client); - ACPI_FREE(ares); - return ret; -} - - -static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) -{ - acpi_handle handle; - struct i2c_acpi_handler_data *data; - acpi_status status; - - if (!adapter->dev.parent) - return -ENODEV; - - handle = ACPI_HANDLE(adapter->dev.parent); - - if (!handle) - return -ENODEV; - - data = kzalloc(sizeof(struct i2c_acpi_handler_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->adapter = adapter; - status = acpi_bus_attach_private_data(handle, (void *)data); - if (ACPI_FAILURE(status)) { - kfree(data); - return -ENOMEM; - } - - status = acpi_install_address_space_handler(handle, - ACPI_ADR_SPACE_GSBUS, - &i2c_acpi_space_handler, - NULL, - data); - if (ACPI_FAILURE(status)) { - dev_err(&adapter->dev, "Error installing i2c space handler\n"); - acpi_bus_detach_private_data(handle); - kfree(data); - return -ENOMEM; - } - - acpi_walk_dep_device_list(handle); - return 0; -} - -static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) -{ - acpi_handle handle; - struct i2c_acpi_handler_data *data; - acpi_status status; - - if (!adapter->dev.parent) - return; - - handle = ACPI_HANDLE(adapter->dev.parent); - - if (!handle) - return; - - acpi_remove_address_space_handler(handle, - ACPI_ADR_SPACE_GSBUS, - &i2c_acpi_space_handler); - - status = acpi_bus_get_private_data(handle, (void **)&data); - if (ACPI_SUCCESS(status)) - kfree(data); - - acpi_bus_detach_private_data(handle); -} -#else /* CONFIG_ACPI_I2C_OPREGION */ -static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) -{ } - -static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) -{ return 0; } -#endif /* CONFIG_ACPI_I2C_OPREGION */ - -/* ------------------------------------------------------------------------- */ - const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id, const struct i2c_client *client) { diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 22151c88e885..3b63f5e5b89c 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -30,6 +30,21 @@ extern int __i2c_first_dynamic_bus_num; int i2c_check_addr_validity(unsigned addr, unsigned short flags); int i2c_check_7bit_addr_validity_strict(unsigned short addr); +#ifdef CONFIG_ACPI +void i2c_acpi_register_devices(struct i2c_adapter *adap); +#else /* CONFIG_ACPI */ +static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_ACPI */ +extern struct notifier_block i2c_acpi_notifier; + +#ifdef CONFIG_ACPI_I2C_OPREGION +int i2c_acpi_install_space_handler(struct i2c_adapter *adapter); +void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter); +#else /* CONFIG_ACPI_I2C_OPREGION */ +static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) { return 0; } +static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) { } +#endif /* CONFIG_ACPI_I2C_OPREGION */ + #ifdef CONFIG_OF void of_i2c_register_devices(struct i2c_adapter *adap); #else From 984b292333ea873cfa1eb5ae17344b40a43e26c3 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 May 2017 22:55:42 +0200 Subject: [PATCH 06/51] docs: i2c: dev-interface: adapt to new filenames of the i2c core The I2C core files were renamed, adapt the textfile to it. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- Documentation/i2c/dev-interface | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index bcf919d8625c..5ff19447ac44 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -191,7 +191,7 @@ checking on future transactions.) 4* Other ioctl() calls are converted to in-kernel function calls by i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which -performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer(). +performs an SMBus transaction using i2c-core-smbus.c:i2c_smbus_xfer(). The i2c-dev driver is responsible for checking all the parameters that come from user-space for validity. After this point, there is no @@ -200,13 +200,13 @@ and calls that would have been performed by kernel I2C chip drivers directly. This means that I2C bus drivers don't need to implement anything special to support access from user-space. -5* These i2c-core.c/i2c.h functions are wrappers to the actual -implementation of your I2C bus driver. Each adapter must declare -callback functions implementing these standard calls. -i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(), -while i2c-core.c:i2c_smbus_xfer() calls either +5* These i2c.h functions are wrappers to the actual implementation of +your I2C bus driver. Each adapter must declare callback functions +implementing these standard calls. i2c.h:i2c_get_functionality() calls +i2c_adapter.algo->functionality(), while +i2c-core-smbus.c:i2c_smbus_xfer() calls either adapter.algo->smbus_xfer() if it is implemented, or if not, -i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls +i2c-core-smbus.c:i2c_smbus_xfer_emulated() which in turn calls i2c_adapter.algo->master_xfer(). After your I2C bus driver has processed these requests, execution runs From 16210d0692d69512d77d0610cef0eaa0d783d1ba Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 22:22:34 +0200 Subject: [PATCH 07/51] i2c: remove unneeded includes from core They seem like cruft to me. I couldn't find any evidence that something included from there is actually used. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-base.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index ac7b95e4cda7..78135c1deaab 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -21,7 +21,6 @@ #define pr_fmt(fmt) "i2c-core: " fmt #include -#include #include #include #include @@ -29,7 +28,6 @@ #include #include #include -#include #include #include #include From 61e3d0f79d6eff1928222ec940b7982b99904857 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 19:23:11 +0200 Subject: [PATCH 08/51] i2c: reformat core-base file header Finally, apply modern comment rules to the file header. The old style looked very non-Linuxish and challenged my eyes for some time now. I also added my own copyright for the period of me being the maintainer. Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-base.c | 43 +++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 78135c1deaab..c89dac7fd2e7 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1,21 +1,21 @@ -/* i2c-core.c - a device driver for the iic-bus interface */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-99 Simon G. Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki . - Mux support by Rodolfo Giometti and - Michael Lawnick +/* + * Linux I2C core + * + * Copyright (C) 1995-99 Simon G. Vogl + * With some changes from Kyösti Mälkki + * Mux support by Rodolfo Giometti and + * Michael Lawnick + * + * Copyright (C) 2013-2017 Wolfram Sang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. */ #define pr_fmt(fmt) "i2c-core: " fmt @@ -57,9 +57,10 @@ #define I2C_ADDR_7BITS_MAX 0x77 #define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1) -/* core_lock protects i2c_adapter_idr, and guarantees - that device detection, deletion of detected devices, and attach_adapter - calls are serialized */ +/* + * core_lock protects i2c_adapter_idr, and guarantees that device detection, + * deletion of detected devices, and attach_adapter calls are serialized + */ static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); From d140bd42b2ced34ce31e9e4384526ce159feabf1 Mon Sep 17 00:00:00 2001 From: Hoan Tran Date: Mon, 24 Apr 2017 11:00:25 -0700 Subject: [PATCH 09/51] i2c: xgene-slimpro: Use a single function to send command message This patch refactors the code to use a single message function to send command message. Signed-off-by: Hoan Tran Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xgene-slimpro.c | 67 ++++++++++---------------- 1 file changed, 26 insertions(+), 41 deletions(-) diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index 6ba6c83ca8f1..4e2257850d2c 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -144,26 +144,38 @@ static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) return 0; } +static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx, + u32 *msg, + u32 *data) +{ + int rc; + + ctx->resp_msg = data; + + rc = mbox_send_message(ctx->mbox_chan, msg); + if (rc < 0) + goto err; + + rc = start_i2c_msg_xfer(ctx); + +err: + ctx->resp_msg = NULL; + + return rc; +} + static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, u32 addrlen, u32 protocol, u32 readlen, u32 *data) { u32 msg[3]; - int rc; msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, protocol, addrlen, readlen); msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); msg[2] = 0; - ctx->resp_msg = data; - rc = mbox_send_message(ctx->mbox_chan, &msg); - if (rc < 0) - goto err; - rc = start_i2c_msg_xfer(ctx); -err: - ctx->resp_msg = NULL; - return rc; + return slimpro_i2c_send_msg(ctx, msg, data); } static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, @@ -171,22 +183,13 @@ static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, u32 data) { u32 msg[3]; - int rc; msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, protocol, addrlen, writelen); msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); msg[2] = data; - ctx->resp_msg = msg; - rc = mbox_send_message(ctx->mbox_chan, &msg); - if (rc < 0) - goto err; - - rc = start_i2c_msg_xfer(ctx); -err: - ctx->resp_msg = NULL; - return rc; + return slimpro_i2c_send_msg(ctx, msg, msg); } static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, @@ -201,8 +204,7 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, if (dma_mapping_error(ctx->dev, paddr)) { dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", ctx->dma_buffer); - rc = -ENOMEM; - goto err; + return -ENOMEM; } msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, @@ -212,21 +214,13 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | SLIMPRO_IIC_ENCODE_ADDR(addr); msg[2] = (u32)paddr; - ctx->resp_msg = msg; - rc = mbox_send_message(ctx->mbox_chan, &msg); - if (rc < 0) - goto err_unmap; - - rc = start_i2c_msg_xfer(ctx); + rc = slimpro_i2c_send_msg(ctx, msg, msg); /* Copy to destination */ memcpy(data, ctx->dma_buffer, readlen); -err_unmap: dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE); -err: - ctx->resp_msg = NULL; return rc; } @@ -244,8 +238,7 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, if (dma_mapping_error(ctx->dev, paddr)) { dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", ctx->dma_buffer); - rc = -ENOMEM; - goto err; + return -ENOMEM; } msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, @@ -254,21 +247,13 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | SLIMPRO_IIC_ENCODE_ADDR(addr); msg[2] = (u32)paddr; - ctx->resp_msg = msg; if (ctx->mbox_client.tx_block) reinit_completion(&ctx->rd_complete); - rc = mbox_send_message(ctx->mbox_chan, &msg); - if (rc < 0) - goto err_unmap; + rc = slimpro_i2c_send_msg(ctx, msg, msg); - rc = start_i2c_msg_xfer(ctx); - -err_unmap: dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE); -err: - ctx->resp_msg = NULL; return rc; } From df5da47fe722e36055b97134e6bb9df58c12495c Mon Sep 17 00:00:00 2001 From: Hoan Tran Date: Mon, 24 Apr 2017 11:00:26 -0700 Subject: [PATCH 10/51] i2c: xgene-slimpro: Add ACPI support by using PCC mailbox This patch adds ACPI support by using PCC mailbox communication interface. Signed-off-by: Hoan Tran Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xgene-slimpro.c | 174 +++++++++++++++++++++++-- 1 file changed, 161 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index 4e2257850d2c..8e5c8f28bc8b 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -22,6 +22,7 @@ * using the APM X-Gene SLIMpro mailbox driver. * */ +#include #include #include #include @@ -89,6 +90,8 @@ ((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \ ((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK)) +#define SLIMPRO_MSG_TYPE(v) (((v) & 0xF0000000) >> 28) + /* * Encode for upper address for block data */ @@ -99,19 +102,47 @@ & 0x3FF00000)) #define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF) +#define SLIMPRO_IIC_MSG_DWORD_COUNT 3 + +/* PCC related defines */ +#define PCC_SIGNATURE 0x50424300 +#define PCC_STS_CMD_COMPLETE BIT(0) +#define PCC_STS_SCI_DOORBELL BIT(1) +#define PCC_STS_ERR BIT(2) +#define PCC_STS_PLAT_NOTIFY BIT(3) +#define PCC_CMD_GENERATE_DB_INT BIT(15) + struct slimpro_i2c_dev { struct i2c_adapter adapter; struct device *dev; struct mbox_chan *mbox_chan; struct mbox_client mbox_client; + int mbox_idx; struct completion rd_complete; u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */ u32 *resp_msg; + phys_addr_t comm_base_addr; + void *pcc_comm_addr; }; #define to_slimpro_i2c_dev(cl) \ container_of(cl, struct slimpro_i2c_dev, mbox_client) +/* + * This function tests and clears a bitmask then returns its old value + */ +static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask) +{ + u16 ret, val; + + val = le16_to_cpu(READ_ONCE(*addr)); + ret = val & mask; + val &= ~mask; + WRITE_ONCE(*addr, cpu_to_le16(val)); + + return ret; +} + static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) { struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); @@ -129,9 +160,53 @@ static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) complete(&ctx->rd_complete); } +static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg) +{ + struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); + struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; + + /* Check if platform sends interrupt */ + if (!xgene_word_tst_and_clr(&generic_comm_base->status, + PCC_STS_SCI_DOORBELL)) + return; + + if (xgene_word_tst_and_clr(&generic_comm_base->status, + PCC_STS_CMD_COMPLETE)) { + msg = generic_comm_base + 1; + + /* Response message msg[1] contains the return value. */ + if (ctx->resp_msg) + *ctx->resp_msg = ((u32 *)msg)[1]; + + complete(&ctx->rd_complete); + } +} + +static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg) +{ + struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; + u32 *ptr = (void *)(generic_comm_base + 1); + u16 status; + int i; + + WRITE_ONCE(generic_comm_base->signature, + cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx)); + + WRITE_ONCE(generic_comm_base->command, + cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT)); + + status = le16_to_cpu(READ_ONCE(generic_comm_base->status)); + status &= ~PCC_STS_CMD_COMPLETE; + WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status)); + + /* Copy the message to the PCC comm space */ + for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++) + WRITE_ONCE(ptr[i], cpu_to_le32(msg[i])); +} + static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) { - if (ctx->mbox_client.tx_block) { + if (ctx->mbox_client.tx_block || !acpi_disabled) { if (!wait_for_completion_timeout(&ctx->rd_complete, msecs_to_jiffies(MAILBOX_OP_TIMEOUT))) return -ETIMEDOUT; @@ -152,6 +227,11 @@ static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx, ctx->resp_msg = data; + if (!acpi_disabled) { + reinit_completion(&ctx->rd_complete); + slimpro_i2c_pcc_tx_prepare(ctx, msg); + } + rc = mbox_send_message(ctx->mbox_chan, msg); if (rc < 0) goto err; @@ -159,6 +239,9 @@ static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx, rc = start_i2c_msg_xfer(ctx); err: + if (!acpi_disabled) + mbox_chan_txdone(ctx->mbox_chan, 0); + ctx->resp_msg = NULL; return rc; @@ -379,17 +462,73 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev) /* Request mailbox channel */ cl->dev = &pdev->dev; - cl->rx_callback = slimpro_i2c_rx_cb; - cl->tx_block = true; init_completion(&ctx->rd_complete); cl->tx_tout = MAILBOX_OP_TIMEOUT; cl->knows_txdone = false; - ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); - if (IS_ERR(ctx->mbox_chan)) { - dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); - return PTR_ERR(ctx->mbox_chan); - } + if (acpi_disabled) { + cl->tx_block = true; + cl->rx_callback = slimpro_i2c_rx_cb; + ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); + if (IS_ERR(ctx->mbox_chan)) { + dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); + return PTR_ERR(ctx->mbox_chan); + } + } else { + struct acpi_pcct_hw_reduced *cppc_ss; + if (device_property_read_u32(&pdev->dev, "pcc-channel", + &ctx->mbox_idx)) + ctx->mbox_idx = MAILBOX_I2C_INDEX; + + cl->tx_block = false; + cl->rx_callback = slimpro_i2c_pcc_rx_cb; + ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx); + if (IS_ERR(ctx->mbox_chan)) { + dev_err(&pdev->dev, "PCC mailbox channel request failed\n"); + return PTR_ERR(ctx->mbox_chan); + } + + /* + * The PCC mailbox controller driver should + * have parsed the PCCT (global table of all + * PCC channels) and stored pointers to the + * subspace communication region in con_priv. + */ + cppc_ss = ctx->mbox_chan->con_priv; + if (!cppc_ss) { + dev_err(&pdev->dev, "PPC subspace not found\n"); + rc = -ENOENT; + goto mbox_err; + } + + if (!ctx->mbox_chan->mbox->txdone_irq) { + dev_err(&pdev->dev, "PCC IRQ not supported\n"); + rc = -ENOENT; + goto mbox_err; + } + + /* + * This is the shared communication region + * for the OS and Platform to communicate over. + */ + ctx->comm_base_addr = cppc_ss->base_address; + if (ctx->comm_base_addr) { + ctx->pcc_comm_addr = memremap(ctx->comm_base_addr, + cppc_ss->length, + MEMREMAP_WB); + } else { + dev_err(&pdev->dev, "Failed to get PCC comm region\n"); + rc = -ENOENT; + goto mbox_err; + } + + if (!ctx->pcc_comm_addr) { + dev_err(&pdev->dev, + "Failed to ioremap PCC comm region\n"); + rc = -ENOMEM; + goto mbox_err; + } + } rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (rc) dev_warn(&pdev->dev, "Unable to set dma mask\n"); @@ -404,13 +543,19 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev) ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev)); i2c_set_adapdata(adapter, ctx); rc = i2c_add_adapter(adapter); - if (rc) { - mbox_free_channel(ctx->mbox_chan); - return rc; - } + if (rc) + goto mbox_err; dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n"); return 0; + +mbox_err: + if (acpi_disabled) + mbox_free_channel(ctx->mbox_chan); + else + pcc_mbox_free_channel(ctx->mbox_chan); + + return rc; } static int xgene_slimpro_i2c_remove(struct platform_device *pdev) @@ -419,7 +564,10 @@ static int xgene_slimpro_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&ctx->adapter); - mbox_free_channel(ctx->mbox_chan); + if (acpi_disabled) + mbox_free_channel(ctx->mbox_chan); + else + pcc_mbox_free_channel(ctx->mbox_chan); return 0; } From 6c42778780c40c7db0ee2bb56436cae86e4c1ba4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 16 May 2017 13:21:05 +0200 Subject: [PATCH 11/51] i2c: stub: use pr_fmt Instead of hard coding "i2c-stub:", let's use the pr_fmt mechanism to achieve the same more easily. This makes it easier to stay consistent when adding new messages. Also, remove an unneeded OOM message while we are here. Signed-off-by: Wolfram Sang Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-stub.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c index 06af583d5101..8b0900147f96 100644 --- a/drivers/i2c/i2c-stub.c +++ b/drivers/i2c/i2c-stub.c @@ -15,7 +15,8 @@ GNU General Public License for more details. */ -#define DEBUG 1 +#define DEBUG +#define pr_fmt(fmt) "i2c-stub: " fmt #include #include @@ -342,7 +343,7 @@ static int __init i2c_stub_allocate_banks(int i) if (!chip->bank_words) return -ENOMEM; - pr_debug("i2c-stub: Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n", + pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n", chip->bank_mask, chip->bank_size, chip->bank_start, chip->bank_end); @@ -363,28 +364,27 @@ static int __init i2c_stub_init(void) int i, ret; if (!chip_addr[0]) { - pr_err("i2c-stub: Please specify a chip address\n"); + pr_err("Please specify a chip address\n"); return -ENODEV; } for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { - pr_err("i2c-stub: Invalid chip address 0x%02x\n", + pr_err("Invalid chip address 0x%02x\n", chip_addr[i]); return -EINVAL; } - pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]); + pr_info("Virtual chip at 0x%02x\n", chip_addr[i]); } /* Allocate memory for all chips at once */ stub_chips_nr = i; stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip), GFP_KERNEL); - if (!stub_chips) { - pr_err("i2c-stub: Out of memory\n"); + if (!stub_chips) return -ENOMEM; - } + for (i = 0; i < stub_chips_nr; i++) { INIT_LIST_HEAD(&stub_chips[i].smbus_blocks); From d2f31c49cf7cfe8f02b70614ae56a39b0c1d8a75 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 18 May 2017 23:11:39 +0200 Subject: [PATCH 12/51] i2c: sh_mobile: remove platform_data No platform currently upstream makes use of this platform_data anymore. The ones that did are converted to DT meanwhile. So, remove it. The old platforms likely don't have the 'clks_per_cnt' feature, otherwise it would have been implemented by now. And in the unlikely case they need to setup a different bus speed, we should rather go for a generic i2c platform data just for that. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sh_mobile.c | 8 -------- include/linux/i2c/i2c-sh_mobile.h | 11 ----------- 2 files changed, 19 deletions(-) delete mode 100644 include/linux/i2c/i2c-sh_mobile.h diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 3d7559348745..d5e39eccae9b 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -879,7 +878,6 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile static int sh_mobile_i2c_probe(struct platform_device *dev) { - struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev); struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; @@ -910,7 +908,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) if (IS_ERR(pd->reg)) return PTR_ERR(pd->reg); - /* Use platform data bus speed or STANDARD_MODE */ ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed); pd->bus_speed = ret ? STANDARD_MODE : bus_speed; @@ -929,11 +926,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) if (config->setup) config->setup(pd); } - } else { - if (pdata && pdata->bus_speed) - pd->bus_speed = pdata->bus_speed; - if (pdata && pdata->clks_per_count) - pd->clks_per_count = pdata->clks_per_count; } /* The IIC blocks on SH-Mobile ARM processors diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h deleted file mode 100644 index 06e3089795fb..000000000000 --- a/include/linux/i2c/i2c-sh_mobile.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __I2C_SH_MOBILE_H__ -#define __I2C_SH_MOBILE_H__ - -#include - -struct i2c_sh_mobile_platform_data { - unsigned long bus_speed; - unsigned int clks_per_count; -}; - -#endif /* __I2C_SH_MOBILE_H__ */ From 90b84c057414cbcca53337c64afc348541989d7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 18 May 2017 23:11:40 +0200 Subject: [PATCH 13/51] i2c: sh_mobile: drop needless check for of_node After removal of platform_data support, we can simplify OF handling. of_match_device() evaluates to NULL if !CONFIG_OF or if there is no node pointer for that device, so we can remove the check for the node ptr. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sh_mobile.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index d5e39eccae9b..2e097d97d258 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -881,6 +881,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; + const struct of_device_id *match; int ret; u32 bus_speed; @@ -910,22 +911,16 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed); pd->bus_speed = ret ? STANDARD_MODE : bus_speed; - pd->clks_per_count = 1; - if (dev->dev.of_node) { - const struct of_device_id *match; + match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev); + if (match) { + const struct sh_mobile_dt_config *config = match->data; - match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev); - if (match) { - const struct sh_mobile_dt_config *config; + pd->clks_per_count = config->clks_per_count; - config = match->data; - pd->clks_per_count = config->clks_per_count; - - if (config->setup) - config->setup(pd); - } + if (config->setup) + config->setup(pd); } /* The IIC blocks on SH-Mobile ARM processors From f9831bfec7414d8f54f064b6b21de0685f107a47 Mon Sep 17 00:00:00 2001 From: Michael Thalmeier Date: Wed, 31 May 2017 11:40:03 +0200 Subject: [PATCH 14/51] i2c: mxs: change error printing to debug for mxs_i2c_pio_wait_xfer_end Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with an error code just print a debug message. NAKs and timeouts can occur in this situation normally, so do not treat them as errors. Signed-off-by: Michael Thalmeier Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 5738556b6aac..d4e8f1954f23 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -419,7 +419,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, ret = mxs_i2c_pio_wait_xfer_end(i2c); if (ret) { - dev_err(i2c->dev, + dev_dbg(i2c->dev, "PIO: Failed to send SELECT command!\n"); goto cleanup; } @@ -431,7 +431,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, ret = mxs_i2c_pio_wait_xfer_end(i2c); if (ret) { - dev_err(i2c->dev, + dev_dbg(i2c->dev, "PIO: Failed to send READ command!\n"); goto cleanup; } @@ -528,7 +528,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, /* Wait for the end of the transfer. */ ret = mxs_i2c_pio_wait_xfer_end(i2c); if (ret) { - dev_err(i2c->dev, + dev_dbg(i2c->dev, "PIO: Failed to finish WRITE cmd!\n"); break; } From d44005672d83f89d7d797efc490a751a696e7d91 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 15 Jun 2017 23:20:54 +0200 Subject: [PATCH 15/51] i2c: stub: fix build warning regression Commit 6c42778780c40c ("i2c: stub: use pr_fmt") changed the DEBUG handling and caused build warnings. Revert back to the original. Fixes: 6c42778780c40c ("i2c: stub: use pr_fmt") Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-stub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c index 8b0900147f96..4a9ad91c5ba3 100644 --- a/drivers/i2c/i2c-stub.c +++ b/drivers/i2c/i2c-stub.c @@ -15,7 +15,7 @@ GNU General Public License for more details. */ -#define DEBUG +#define DEBUG 1 #define pr_fmt(fmt) "i2c-stub: " fmt #include From 063345aede9905beb9b73129da7a0e9d5933b078 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Jun 2017 12:29:12 +0200 Subject: [PATCH 16/51] i2c: xgene-slimpro: include linux/io.h for memremap The newly added support for the pcc mailbox fails to build in some configurations: drivers/i2c/busses/i2c-xgene-slimpro.c: In function 'xgene_slimpro_i2c_probe': drivers/i2c/busses/i2c-xgene-slimpro.c:516:25: error: implicit declaration of function 'memremap'; did you mean 'memcmp'? [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: error: 'MEMREMAP_WB' undeclared (first use in this function) drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: note: each undeclared identifier is reported only once for each function it appears in This includes the missing header file. Fixes: df5da47fe722 ("i2c: xgene-slimpro: Add ACPI support by using PCC mailbox") Signed-off-by: Arnd Bergmann Reviewed-by: Hoan Tran Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xgene-slimpro.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index 8e5c8f28bc8b..7e89ba6fcf6f 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include From 09a1de04d59870b34b2a8106671c7bdea4ca9a90 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 18 May 2017 11:23:06 +0300 Subject: [PATCH 17/51] i2c: i801: Add support for Intel Cannon Lake Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH. Signed-off-by: Srinivas Pandruvada [jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig. Cover Cannon Lake-H too] Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-i801 | 2 ++ drivers/i2c/busses/Kconfig | 2 ++ drivers/i2c/busses/i2c-i801.c | 8 ++++++++ 3 files changed, 12 insertions(+) diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 820d9040de16..0500193434cb 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -34,6 +34,8 @@ Supported adapters: * Intel Broxton (SOC) * Intel Lewisburg (PCH) * Intel Gemini Lake (SOC) + * Intel Cannon Lake-H (PCH) + * Intel Cannon Lake-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 144cbadc7c72..ed7106e48ba4 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -129,6 +129,8 @@ config I2C_I801 Broxton (SOC) Lewisburg (PCH) Gemini Lake (SOC) + Cannon Lake-H (PCH) + Cannon Lake-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 6484fa6dbb84..c9536e17d6ff 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -66,6 +66,8 @@ * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes + * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes + * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -226,10 +228,12 @@ #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 struct i801_mux_config { char *gpio_chip; @@ -1026,6 +1030,8 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, { 0, } }; @@ -1499,6 +1505,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) switch (dev->device) { case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS: + case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS: case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS: case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS: case PCI_DEVICE_ID_INTEL_DNV_SMBUS: From 227855b95411572c3936228e8eb87f2688da2c03 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Thu, 25 May 2017 11:42:15 +0000 Subject: [PATCH 18/51] i2c: xlp9xx: Enable HWMON class probing for xlp9xx Set I2C_CLASS_HWMON for xlp9xx to enable automatic probing of BMC devices by the ipmi-ssif driver. Signed-off-by: George Cherian Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xlp9xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c index ae80228104e9..6b106e94bc09 100644 --- a/drivers/i2c/busses/i2c-xlp9xx.c +++ b/drivers/i2c/busses/i2c-xlp9xx.c @@ -393,6 +393,7 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev) init_completion(&priv->msg_complete); priv->adapter.dev.parent = &pdev->dev; priv->adapter.algo = &xlp9xx_i2c_algo; + priv->adapter.class = I2C_CLASS_HWMON; ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev)); priv->adapter.dev.of_node = pdev->dev.of_node; priv->dev = &pdev->dev; From 5c8e3ab146de92800d516386cbb7040c90210b27 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 28 May 2017 11:30:45 +0200 Subject: [PATCH 19/51] i2c: use proper name for the R-Car SoC It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by: Wolfram Sang Acked-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 214bf2835d1f..214a71cb6442 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -1,5 +1,5 @@ /* - * Driver for the Renesas RCar I2C unit + * Driver for the Renesas R-Car I2C unit * * Copyright (C) 2014-15 Wolfram Sang * Copyright (C) 2011-2015 Renesas Electronics Corporation From 56a6cb88657557edd84eabddd9f509d13b5b81c5 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 31 May 2017 12:27:44 +0530 Subject: [PATCH 20/51] i2c: at91: Handle return value of clk_prepare_enable clk_prepare_enable() can fail here and we must check its return value. Also, add a missing clk_disable_unprepare(). Signed-off-by: Arvind Yadav Acked-by: Ludovic Desroches Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index fabbb9e49161..2525cd9bcbbd 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -1083,12 +1083,16 @@ static int at91_twi_probe(struct platform_device *pdev) dev_err(dev->dev, "no clock defined\n"); return -ENODEV; } - clk_prepare_enable(dev->clk); + rc = clk_prepare_enable(dev->clk); + if (rc) + return rc; if (dev->dev->of_node) { rc = at91_twi_configure_dma(dev, phy_addr); - if (rc == -EPROBE_DEFER) + if (rc == -EPROBE_DEFER) { + clk_disable_unprepare(dev->clk); return rc; + } } if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size", From f27e7805ba6274dc544a8ad85490160c5b535955 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 31 May 2017 12:45:38 +0530 Subject: [PATCH 21/51] i2c: at91: Fix compilation warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace '%d' by '%zu' to fix the following type of compilation warnings: drivers/i2c/busses/i2c-at91.c:277:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=] dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); ^ Signed-off-by: Arvind Yadav Acked-by: Ludovic Desroches Tested-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 2525cd9bcbbd..38dd61d621df 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -274,7 +274,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); - dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); + dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len); ++dev->buf; } @@ -402,7 +402,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) dev->msg->flags &= ~I2C_M_RECV_LEN; dev->buf_len += *dev->buf; dev->msg->len = dev->buf_len + 1; - dev_dbg(dev->dev, "received block length %d\n", + dev_dbg(dev->dev, "received block length %zu\n", dev->buf_len); } else { /* abort and send the stop by reading one more byte */ @@ -415,7 +415,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) if (!dev->use_alt_cmd && dev->buf_len == 1) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); - dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); + dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len); ++dev->buf; } @@ -622,7 +622,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) * writing the corresponding bit into the Control Register. */ - dev_dbg(dev->dev, "transfer: %s %d bytes.\n", + dev_dbg(dev->dev, "transfer: %s %zu bytes.\n", (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len); reinit_completion(&dev->cmd_complete); From e393f674c5fedced24432138a8fc40c3d7a628b8 Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Wed, 14 Jun 2017 11:43:21 +0100 Subject: [PATCH 22/51] i2c: designware: Cleaning and comment style fixes. The purpose of this commit is to fix some comments and styling in the existing code due to the need of reuse this code. What is being made here is: - Sorted the headers files - Corrected some comments style (capital letters, lowcase i2c) - Reverse tree in the variables declaration - Add/remove empty lines and tabs where needed - Fix of misspelled word "endianness" and "transferred" - Replaced the return variable "r" with the more standard "ret" The value of this, besides the rules of coding style, is because I will use this code after and it will make my future patch a lot bigger and complicated to review. The work here won't bring any additional work to backported fixes because is just style and reordering. Signed-off-by: Luis Oliveira Acked-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 78 ++++++++++----------- drivers/i2c/busses/i2c-designware-core.h | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 43 ++++++------ 3 files changed, 62 insertions(+), 61 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 3c41995634c2..d9cab6dc2812 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -21,17 +21,17 @@ * ---------------------------------------------------------------------------- * */ +#include #include #include #include #include #include #include -#include -#include #include -#include "i2c-designware-core.h" +#include +#include "i2c-designware-core.h" /* * Registers offset */ @@ -98,7 +98,7 @@ #define DW_IC_ERR_TX_ABRT 0x1 -#define DW_IC_TAR_10BITADDR_MASTER BIT(12) +#define DW_IC_TAR_10BITADDR_MASTER BIT(12) #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) @@ -113,10 +113,10 @@ #define TIMEOUT 20 /* ms */ /* - * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register * - * only expected abort codes are listed here - * refer to the datasheet for the full list + * Only expected abort codes are listed here, + * refer to the datasheet for the full list. */ #define ABRT_7B_ADDR_NOACK 0 #define ABRT_10ADDR1_NOACK 1 @@ -318,7 +318,7 @@ static void i2c_dw_release_lock(struct dw_i2c_dev *dev) } /** - * i2c_dw_init() - initialize the designware i2c master hardware + * i2c_dw_init() - Initialize the designware I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. @@ -344,8 +344,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev) /* Configure register access mode 16bit */ dev->flags |= ACCESS_16BIT; } else if (reg != DW_IC_COMP_TYPE_VALUE) { - dev_err(dev->dev, "Unknown Synopsys component type: " - "0x%08x\n", reg); + dev_err(dev->dev, + "Unknown Synopsys component type: 0x%08x\n", reg); i2c_dw_release_lock(dev); return -ENODEV; } @@ -355,7 +355,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) /* Disable the adapter */ __i2c_dw_enable_and_wait(dev, false); - /* set standard and fast speed deviders for high/low periods */ + /* Set standard and fast speed deviders for high/low periods */ sda_falling_time = dev->sda_falling_time ?: 300; /* ns */ scl_falling_time = dev->scl_falling_time ?: 300; /* ns */ @@ -444,7 +444,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); dw_writel(dev, 0, DW_IC_RX_TL); - /* configure the i2c master */ + /* Configure the I2C master */ dw_writel(dev, dev->master_cfg , DW_IC_CON); i2c_dw_release_lock(dev); @@ -480,7 +480,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) /* Disable the adapter */ __i2c_dw_enable_and_wait(dev, false); - /* if the slave address is ten bit address, enable 10BITADDR */ + /* If the slave address is ten bit address, enable 10BITADDR */ ic_con = dw_readl(dev, DW_IC_CON); if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) { ic_con |= DW_IC_CON_10BITADDR_MASTER; @@ -503,7 +503,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) */ dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR); - /* enforce disabled interrupts (due to HW issues) */ + /* Enforce disabled interrupts (due to HW issues) */ i2c_dw_disable_int(dev); /* Enable the adapter */ @@ -537,9 +537,9 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u32 flags = msgs[dev->msg_write_idx].flags; /* - * if target address has changed, we need to - * reprogram the target address in the i2c - * adapter when we are done with this transfer + * If target address has changed, we need to + * reprogram the target address in the I2C + * adapter when we are done with this transfer. */ if (msgs[dev->msg_write_idx].addr != addr) { dev_err(dev->dev, @@ -599,7 +599,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { - /* avoid rx buffer overrun */ + /* Avoid rx buffer overrun */ if (dev->rx_outstanding >= dev->rx_fifo_depth) break; @@ -728,7 +728,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) } /* - * Prepare controller for a transaction and call i2c_dw_xfer_msg + * Prepare controller for a transaction and call i2c_dw_xfer_msg. */ static int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) @@ -759,10 +759,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (ret < 0) goto done; - /* start the transfers */ + /* Start the transfers */ i2c_dw_xfer_init(dev); - /* wait for tx to complete */ + /* Wait for tx to complete */ if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) { dev_err(dev->dev, "controller timed out\n"); /* i2c_dw_init implicitly disables the adapter */ @@ -786,7 +786,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) goto done; } - /* no error */ + /* No error */ if (likely(!dev->cmd_err && !dev->status)) { ret = num; goto done; @@ -821,8 +821,8 @@ static u32 i2c_dw_func(struct i2c_adapter *adap) } static const struct i2c_algorithm i2c_dw_algo = { - .master_xfer = i2c_dw_xfer, - .functionality = i2c_dw_func, + .master_xfer = i2c_dw_xfer, + .functionality = i2c_dw_func, }; static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) @@ -903,7 +903,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) /* * Anytime TX_ABRT is set, the contents of the tx/rx - * buffers are flushed. Make sure to skip them. + * buffers are flushed. Make sure to skip them. */ dw_writel(dev, 0, DW_IC_INTR_MASK); goto tx_aborted; @@ -925,7 +925,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) complete(&dev->cmd_complete); else if (unlikely(dev->flags & ACCESS_INTR_MASK)) { - /* workaround to trigger pending interrupt */ + /* Workaround to trigger pending interrupt */ stat = dw_readl(dev, DW_IC_INTR_MASK); i2c_dw_disable_int(dev); dw_writel(dev, stat, DW_IC_INTR_MASK); @@ -961,13 +961,13 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) { struct i2c_adapter *adap = &dev->adapter; unsigned long irq_flags; - int r; + int ret; init_completion(&dev->cmd_complete); - r = i2c_dw_init(dev); - if (r) - return r; + ret = i2c_dw_init(dev); + if (ret) + return ret; snprintf(adap->name, sizeof(adap->name), "Synopsys DesignWare I2C adapter"); @@ -984,12 +984,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) } i2c_dw_disable_int(dev); - r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, - dev_name(dev->dev), dev); - if (r) { + ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, + dev_name(dev->dev), dev); + if (ret) { dev_err(dev->dev, "failure requesting irq %i: %d\n", - dev->irq, r); - return r; + dev->irq, ret); + return ret; } /* @@ -999,12 +999,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) * registered I2C slaves that do I2C transfers in their probe. */ pm_runtime_get_noresume(dev->dev); - r = i2c_add_numbered_adapter(adap); - if (r) - dev_err(dev->dev, "failure adding adapter: %d\n", r); + ret = i2c_add_numbered_adapter(adap); + if (ret) + dev_err(dev->dev, "failure adding adapter: %d\n", ret); pm_runtime_put_noidle(dev->dev); - return r; + return ret; } EXPORT_SYMBOL_GPL(i2c_dw_probe); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index a7cf429daf60..fe9b66898a72 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -49,7 +49,7 @@ * @cmd_complete: tx completion indicator * @clk: input reference clock * @cmd_err: run time hadware error code - * @msgs: points to an array of messages currently being transfered + * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs * array diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index d1263b82d646..613dfb88307f 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -21,27 +21,28 @@ * ---------------------------------------------------------------------------- * */ -#include -#include +#include +#include +#include #include #include -#include -#include -#include -#include -#include #include +#include +#include #include +#include +#include +#include #include +#include #include #include #include #include -#include #include +#include #include -#include -#include + #include "i2c-designware-core.h" static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) @@ -209,11 +210,11 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id) static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct dw_i2c_dev *dev; struct i2c_adapter *adap; - struct resource *mem; - int irq, r; + struct dw_i2c_dev *dev; u32 acpi_speed, ht = 0; + struct resource *mem; + int irq, ret; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -276,12 +277,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) { dev_err(&pdev->dev, "Only 100kHz, 400kHz, 1MHz and 3.4MHz supported"); - r = -EINVAL; + ret = -EINVAL; goto exit_reset; } - r = i2c_dw_probe_lock_support(dev); - if (r) + ret = i2c_dw_probe_lock_support(dev); + if (ret) goto exit_reset; dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; @@ -327,11 +328,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); } - r = i2c_dw_probe(dev); - if (r) + ret = i2c_dw_probe(dev); + if (ret) goto exit_probe; - return r; + return ret; exit_probe: if (!dev->pm_disabled) @@ -339,7 +340,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) exit_reset: if (!IS_ERR_OR_NULL(dev->rst)) reset_control_assert(dev->rst); - return r; + return ret; } static int dw_i2c_plat_remove(struct platform_device *pdev) @@ -423,7 +424,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = { #define DW_I2C_DEV_PMOPS NULL #endif -/* work with hotplug and coldplug */ +/* Work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { From 89a1e1bd7ba9a6711908bb79af0af6cbdf4a7e79 Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Wed, 14 Jun 2017 11:43:22 +0100 Subject: [PATCH 23/51] i2c: designware: refactoring of the i2c-designware - Factor out all _master() part of code from i2c-designware-core and i2c-designware-platdrv to separate functions. - Standardize all code related with MASTER mode. - I have to take off DW_IC_INTR_TX_EMPTY from DW_IC_INTR_DEFAULT_MASK because it is master specific. The purpose of this is to prepare the controller to have is I2C MASTER flow in a separate driver. To do this first all the functions/definitions related to the MASTER flow were identified. Signed-off-by: Luis Oliveira Acked-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 56 +++++++++++++-------- drivers/i2c/busses/i2c-designware-platdrv.c | 31 +++++++----- 2 files changed, 52 insertions(+), 35 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index d9cab6dc2812..e8a7621c187e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -87,10 +87,10 @@ #define DW_IC_INTR_GEN_CALL 0x800 #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_EMPTY | \ DW_IC_INTR_TX_ABRT | \ DW_IC_INTR_STOP_DET) - +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) #define DW_IC_STATUS_ACTIVITY 0x1 #define DW_IC_SDA_HOLD_RX_SHIFT 16 @@ -202,6 +202,16 @@ static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) } } +static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) +{ + /* Configure Tx/Rx FIFO threshold levels */ + dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); + dw_writel(dev, 0, DW_IC_RX_TL); + + /* Configure the I2C master */ + dw_writel(dev, dev->master_cfg, DW_IC_CON); +} + static u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { @@ -440,13 +450,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) "Hardware too old to adjust SDA hold time.\n"); } - /* Configure Tx/Rx FIFO threshold levels */ - dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); - dw_writel(dev, 0, DW_IC_RX_TL); - - /* Configure the I2C master */ - dw_writel(dev, dev->master_cfg , DW_IC_CON); - + i2c_dw_configure_fifo_master(dev); i2c_dw_release_lock(dev); return 0; @@ -511,7 +515,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) /* Clear and enable interrupts */ dw_readl(dev, DW_IC_CLR_INTR); - dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); + dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK); } /* @@ -531,7 +535,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u8 *buf = dev->tx_buf; bool need_restart = false; - intr_mask = DW_IC_INTR_DEFAULT_MASK; + intr_mask = DW_IC_INTR_MASTER_MASK; for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) { u32 flags = msgs[dev->msg_write_idx].flags; @@ -881,22 +885,14 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) } /* - * Interrupt service routine. This gets called whenever an I2C interrupt + * Interrupt service routine. This gets called whenever an I2C master interrupt * occurs. */ -static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) { - struct dw_i2c_dev *dev = dev_id; - u32 stat, enabled; - - enabled = dw_readl(dev, DW_IC_ENABLE); - stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); - dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat); - if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) - return IRQ_NONE; + u32 stat; stat = i2c_dw_read_clear_intrbits(dev); - if (stat & DW_IC_INTR_TX_ABRT) { dev->cmd_err |= DW_IC_ERR_TX_ABRT; dev->status = STATUS_IDLE; @@ -931,6 +927,22 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) dw_writel(dev, stat, DW_IC_INTR_MASK); } + return 0; +} + +static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +{ + struct dw_i2c_dev *dev = dev_id; + u32 stat, enabled; + + enabled = dw_readl(dev, DW_IC_ENABLE); + stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); + dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat); + if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) + return IRQ_NONE; + + i2c_dw_irq_handler_master(dev); + return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 613dfb88307f..fd14b410369e 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -172,6 +172,23 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) } #endif +static void i2c_dw_configure_master(struct dw_i2c_dev *dev) +{ + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN; + + switch (dev->clk_freq) { + case 100000: + dev->master_cfg |= DW_IC_CON_SPEED_STD; + break; + case 3400000: + dev->master_cfg |= DW_IC_CON_SPEED_HIGH; + break; + default: + dev->master_cfg |= DW_IC_CON_SPEED_FAST; + } +} + static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) { if (IS_ERR(i_dev->clk)) @@ -287,19 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN; - - switch (dev->clk_freq) { - case 100000: - dev->master_cfg |= DW_IC_CON_SPEED_STD; - break; - case 3400000: - dev->master_cfg |= DW_IC_CON_SPEED_HIGH; - break; - default: - dev->master_cfg |= DW_IC_CON_SPEED_FAST; - } + i2c_dw_configure_master(dev); dev->clk = devm_clk_get(&pdev->dev, NULL); if (!i2c_dw_plat_prepare_clk(dev, true)) { From 90312351fd1e47183662a6abf159cbf751ea62f1 Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Wed, 14 Jun 2017 11:43:23 +0100 Subject: [PATCH 24/51] i2c: designware: MASTER mode as separated driver - The functions related to I2C master mode of operation were transformed in a single driver. - Common definitions were moved to i2c-designware-core.h - The i2c-designware-core is now only a library file, the functions associated are in a source file called i2c-designware-common and are used by both i2c-designware-master and i2c-designware-slave. - To decrease noise in namespace common i2c_dw_*() functions are now using ops to keep them private. - Designware PCI driver had to be changed to match the previous ops functions implementation. Almost all of the "core" source is now part of the "master" source. The difference is the functions used by both modes and they are in the "common" source file. Signed-off-by: Luis Oliveira Acked-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-designware-common.c | 275 +++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 143 ++++++- ...ignware-core.c => i2c-designware-master.c} | 367 +----------------- drivers/i2c/busses/i2c-designware-pcidrv.c | 9 +- drivers/i2c/busses/i2c-designware-platdrv.c | 6 +- 6 files changed, 433 insertions(+), 368 deletions(-) create mode 100644 drivers/i2c/busses/i2c-designware-common.c rename drivers/i2c/busses/{i2c-designware-core.c => i2c-designware-master.c} (65%) diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 30b60855fbcd..c89a4314c563 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o +i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c new file mode 100644 index 000000000000..0d0ccb73f0e6 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -0,0 +1,275 @@ +/* + * Synopsys DesignWare I2C adapter driver. + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ---------------------------------------------------------------------------- + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "i2c-designware-core.h" + +static char *abort_sources[] = { + [ABRT_7B_ADDR_NOACK] = + "slave address not acknowledged (7bit mode)", + [ABRT_10ADDR1_NOACK] = + "first address byte not acknowledged (10bit mode)", + [ABRT_10ADDR2_NOACK] = + "second address byte not acknowledged (10bit mode)", + [ABRT_TXDATA_NOACK] = + "data not acknowledged", + [ABRT_GCALL_NOACK] = + "no acknowledgement for a general call", + [ABRT_GCALL_READ] = + "read after general call", + [ABRT_SBYTE_ACKDET] = + "start byte acknowledged", + [ABRT_SBYTE_NORSTRT] = + "trying to send start byte when restart is disabled", + [ABRT_10B_RD_NORSTRT] = + "trying to read when restart is disabled (10bit mode)", + [ABRT_MASTER_DIS] = + "trying to use disabled adapter", + [ARB_LOST] = + "lost arbitration", +}; + +u32 dw_readl(struct dw_i2c_dev *dev, int offset) +{ + u32 value; + + if (dev->flags & ACCESS_16BIT) + value = readw_relaxed(dev->base + offset) | + (readw_relaxed(dev->base + offset + 2) << 16); + else + value = readl_relaxed(dev->base + offset); + + if (dev->flags & ACCESS_SWAP) + return swab32(value); + else + return value; +} + +void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +{ + if (dev->flags & ACCESS_SWAP) + b = swab32(b); + + if (dev->flags & ACCESS_16BIT) { + writew_relaxed((u16)b, dev->base + offset); + writew_relaxed((u16)(b >> 16), dev->base + offset + 2); + } else { + writel_relaxed(b, dev->base + offset); + } +} + +u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) +{ + /* + * DesignWare I2C core doesn't seem to have solid strategy to meet + * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec + * will result in violation of the tHD;STA spec. + */ + if (cond) + /* + * Conditional expression: + * + * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH + * + * This is based on the DW manuals, and represents an ideal + * configuration. The resulting I2C bus speed will be + * faster than any of the others. + * + * If your hardware is free from tHD;STA issue, try this one. + */ + return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset; + else + /* + * Conditional expression: + * + * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf) + * + * This is just experimental rule; the tHD;STA period turned + * out to be proportinal to (_HCNT + 3). With this setting, + * we could meet both tHIGH and tHD;STA timing specs. + * + * If unsure, you'd better to take this alternative. + * + * The reason why we need to take into account "tf" here, + * is the same as described in i2c_dw_scl_lcnt(). + */ + return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000 + - 3 + offset; +} + +u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) +{ + /* + * Conditional expression: + * + * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf) + * + * DW I2C core starts counting the SCL CNTs for the LOW period + * of the SCL clock (tLOW) as soon as it pulls the SCL line. + * In order to meet the tLOW timing spec, we need to take into + * account the fall time of SCL signal (tf). Default tf value + * should be 0.3 us, for safety. + */ + return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset; +} + +void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) +{ + dw_writel(dev, enable, DW_IC_ENABLE); +} + +void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable) +{ + int timeout = 100; + + do { + __i2c_dw_enable(dev, enable); + if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable) + return; + + /* + * Wait 10 times the signaling period of the highest I2C + * transfer supported by the driver (for 400KHz this is + * 25us) as described in the DesignWare I2C databook. + */ + usleep_range(25, 250); + } while (timeout--); + + dev_warn(dev->dev, "timeout in %sabling adapter\n", + enable ? "en" : "dis"); +} + +unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev) +{ + /* + * Clock is not necessary if we got LCNT/HCNT values directly from + * the platform code. + */ + if (WARN_ON_ONCE(!dev->get_clk_rate_khz)) + return 0; + return dev->get_clk_rate_khz(dev); +} + +int i2c_dw_acquire_lock(struct dw_i2c_dev *dev) +{ + int ret; + + if (!dev->acquire_lock) + return 0; + + ret = dev->acquire_lock(dev); + if (!ret) + return 0; + + dev_err(dev->dev, "couldn't acquire bus ownership\n"); + + return ret; +} + +void i2c_dw_release_lock(struct dw_i2c_dev *dev) +{ + if (dev->release_lock) + dev->release_lock(dev); +} + +/* + * Waiting for bus not busy + */ +int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) +{ + int timeout = TIMEOUT; + + while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { + if (timeout <= 0) { + dev_warn(dev->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + timeout--; + usleep_range(1000, 1100); + } + + return 0; +} + +int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) +{ + unsigned long abort_source = dev->abort_source; + int i; + + if (abort_source & DW_IC_TX_ABRT_NOACK) { + for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) + dev_dbg(dev->dev, + "%s: %s\n", __func__, abort_sources[i]); + return -EREMOTEIO; + } + + for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) + dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]); + + if (abort_source & DW_IC_TX_ARB_LOST) + return -EAGAIN; + else if (abort_source & DW_IC_TX_ABRT_GCALL_READ) + return -EINVAL; /* wrong msgs[] data */ + else + return -EIO; +} + +u32 i2c_dw_func(struct i2c_adapter *adap) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); + + return dev->functionality; +} + +void i2c_dw_disable(struct dw_i2c_dev *dev) +{ + /* Disable controller */ + __i2c_dw_enable_and_wait(dev, false); + + /* Disable all interupts */ + dw_writel(dev, 0, DW_IC_INTR_MASK); + dw_readl(dev, DW_IC_CLR_INTR); +} + +void i2c_dw_disable_int(struct dw_i2c_dev *dev) +{ + dw_writel(dev, 0, DW_IC_INTR_MASK); +} + +u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) +{ + return dw_readl(dev, DW_IC_COMP_PARAM_1); +} +EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); + +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index fe9b66898a72..661cfa869ff7 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -41,6 +41,124 @@ #define DW_IC_CON_RESTART_EN 0x20 #define DW_IC_CON_SLAVE_DISABLE 0x40 +/* + * Registers offset + */ +#define DW_IC_CON 0x0 +#define DW_IC_TAR 0x4 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_HS_SCL_HCNT 0x24 +#define DW_IC_HS_SCL_LCNT 0x28 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_SDA_HOLD 0x7c +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_ENABLE_STATUS 0x9c +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_VERSION 0xf8 +#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 + +#define DW_IC_INTR_RX_UNDER 0x001 +#define DW_IC_INTR_RX_OVER 0x002 +#define DW_IC_INTR_RX_FULL 0x004 +#define DW_IC_INTR_TX_OVER 0x008 +#define DW_IC_INTR_TX_EMPTY 0x010 +#define DW_IC_INTR_RD_REQ 0x020 +#define DW_IC_INTR_TX_ABRT 0x040 +#define DW_IC_INTR_RX_DONE 0x080 +#define DW_IC_INTR_ACTIVITY 0x100 +#define DW_IC_INTR_STOP_DET 0x200 +#define DW_IC_INTR_START_DET 0x400 +#define DW_IC_INTR_GEN_CALL 0x800 + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) +#define DW_IC_STATUS_ACTIVITY 0x1 +#define DW_IC_STATUS_TFE BIT(2) +#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) + +#define DW_IC_SDA_HOLD_RX_SHIFT 16 +#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) + +#define DW_IC_ERR_TX_ABRT 0x1 + +#define DW_IC_TAR_10BITADDR_MASTER BIT(12) + +#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) +#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) + +/* + * Status codes + */ +#define STATUS_IDLE 0x0 +#define STATUS_WRITE_IN_PROGRESS 0x1 +#define STATUS_READ_IN_PROGRESS 0x2 + +#define TIMEOUT 20 /* ms */ + +/* + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * + * Only expected abort codes are listed here + * refer to the datasheet for the full list + */ +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 + +#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) +#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) +#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) +#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) +#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) +#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) +#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) +#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) +#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) +#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) + +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) + /** * struct dw_i2c_dev - private i2c-designware data @@ -80,6 +198,9 @@ * @acquire_lock: function to acquire a hardware lock on the bus * @release_lock: function to release a hardware lock on the bus * @pm_disabled: true if power-management should be disabled for this i2c-bus + * @disable: function to disable the controller + * @disable_int: function to disable all interrupts + * @init: function to initialize the I2C hardware * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -129,6 +250,9 @@ struct dw_i2c_dev { int (*acquire_lock)(struct dw_i2c_dev *dev); void (*release_lock)(struct dw_i2c_dev *dev); bool pm_disabled; + void (*disable)(struct dw_i2c_dev *dev); + void (*disable_int)(struct dw_i2c_dev *dev); + int (*init)(struct dw_i2c_dev *dev); }; #define ACCESS_SWAP 0x00000001 @@ -137,9 +261,22 @@ struct dw_i2c_dev { #define MODEL_CHERRYTRAIL 0x00000100 -extern int i2c_dw_init(struct dw_i2c_dev *dev); -extern void i2c_dw_disable(struct dw_i2c_dev *dev); -extern void i2c_dw_disable_int(struct dw_i2c_dev *dev); +u32 dw_readl(struct dw_i2c_dev *dev, int offset); +void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); +u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); +u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable); +void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable); +unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev); +int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); +void i2c_dw_release_lock(struct dw_i2c_dev *dev); +int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); +int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); +u32 i2c_dw_func(struct i2c_adapter *adap); +void i2c_dw_disable(struct dw_i2c_dev *dev); +void i2c_dw_disable_int(struct dw_i2c_dev *dev); +int i2c_dw_init(struct dw_i2c_dev *dev); + extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-master.c similarity index 65% rename from drivers/i2c/busses/i2c-designware-core.c rename to drivers/i2c/busses/i2c-designware-master.c index e8a7621c187e..eefc4db1ee3e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -22,9 +22,9 @@ * */ #include -#include -#include #include +#include +#include #include #include #include @@ -32,175 +32,6 @@ #include #include "i2c-designware-core.h" -/* - * Registers offset - */ -#define DW_IC_CON 0x0 -#define DW_IC_TAR 0x4 -#define DW_IC_DATA_CMD 0x10 -#define DW_IC_SS_SCL_HCNT 0x14 -#define DW_IC_SS_SCL_LCNT 0x18 -#define DW_IC_FS_SCL_HCNT 0x1c -#define DW_IC_FS_SCL_LCNT 0x20 -#define DW_IC_HS_SCL_HCNT 0x24 -#define DW_IC_HS_SCL_LCNT 0x28 -#define DW_IC_INTR_STAT 0x2c -#define DW_IC_INTR_MASK 0x30 -#define DW_IC_RAW_INTR_STAT 0x34 -#define DW_IC_RX_TL 0x38 -#define DW_IC_TX_TL 0x3c -#define DW_IC_CLR_INTR 0x40 -#define DW_IC_CLR_RX_UNDER 0x44 -#define DW_IC_CLR_RX_OVER 0x48 -#define DW_IC_CLR_TX_OVER 0x4c -#define DW_IC_CLR_RD_REQ 0x50 -#define DW_IC_CLR_TX_ABRT 0x54 -#define DW_IC_CLR_RX_DONE 0x58 -#define DW_IC_CLR_ACTIVITY 0x5c -#define DW_IC_CLR_STOP_DET 0x60 -#define DW_IC_CLR_START_DET 0x64 -#define DW_IC_CLR_GEN_CALL 0x68 -#define DW_IC_ENABLE 0x6c -#define DW_IC_STATUS 0x70 -#define DW_IC_TXFLR 0x74 -#define DW_IC_RXFLR 0x78 -#define DW_IC_SDA_HOLD 0x7c -#define DW_IC_TX_ABRT_SOURCE 0x80 -#define DW_IC_ENABLE_STATUS 0x9c -#define DW_IC_COMP_PARAM_1 0xf4 -#define DW_IC_COMP_VERSION 0xf8 -#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A -#define DW_IC_COMP_TYPE 0xfc -#define DW_IC_COMP_TYPE_VALUE 0x44570140 - -#define DW_IC_INTR_RX_UNDER 0x001 -#define DW_IC_INTR_RX_OVER 0x002 -#define DW_IC_INTR_RX_FULL 0x004 -#define DW_IC_INTR_TX_OVER 0x008 -#define DW_IC_INTR_TX_EMPTY 0x010 -#define DW_IC_INTR_RD_REQ 0x020 -#define DW_IC_INTR_TX_ABRT 0x040 -#define DW_IC_INTR_RX_DONE 0x080 -#define DW_IC_INTR_ACTIVITY 0x100 -#define DW_IC_INTR_STOP_DET 0x200 -#define DW_IC_INTR_START_DET 0x400 -#define DW_IC_INTR_GEN_CALL 0x800 - -#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_ABRT | \ - DW_IC_INTR_STOP_DET) -#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ - DW_IC_INTR_TX_EMPTY) -#define DW_IC_STATUS_ACTIVITY 0x1 - -#define DW_IC_SDA_HOLD_RX_SHIFT 16 -#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) - -#define DW_IC_ERR_TX_ABRT 0x1 - -#define DW_IC_TAR_10BITADDR_MASTER BIT(12) - -#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) -#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) - -/* - * status codes - */ -#define STATUS_IDLE 0x0 -#define STATUS_WRITE_IN_PROGRESS 0x1 -#define STATUS_READ_IN_PROGRESS 0x2 - -#define TIMEOUT 20 /* ms */ - -/* - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register - * - * Only expected abort codes are listed here, - * refer to the datasheet for the full list. - */ -#define ABRT_7B_ADDR_NOACK 0 -#define ABRT_10ADDR1_NOACK 1 -#define ABRT_10ADDR2_NOACK 2 -#define ABRT_TXDATA_NOACK 3 -#define ABRT_GCALL_NOACK 4 -#define ABRT_GCALL_READ 5 -#define ABRT_SBYTE_ACKDET 7 -#define ABRT_SBYTE_NORSTRT 9 -#define ABRT_10B_RD_NORSTRT 10 -#define ABRT_MASTER_DIS 11 -#define ARB_LOST 12 - -#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) -#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) -#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) -#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) -#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) -#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) -#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) -#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) -#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) -#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) -#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) - -#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ - DW_IC_TX_ABRT_10ADDR1_NOACK | \ - DW_IC_TX_ABRT_10ADDR2_NOACK | \ - DW_IC_TX_ABRT_TXDATA_NOACK | \ - DW_IC_TX_ABRT_GCALL_NOACK) - -static char *abort_sources[] = { - [ABRT_7B_ADDR_NOACK] = - "slave address not acknowledged (7bit mode)", - [ABRT_10ADDR1_NOACK] = - "first address byte not acknowledged (10bit mode)", - [ABRT_10ADDR2_NOACK] = - "second address byte not acknowledged (10bit mode)", - [ABRT_TXDATA_NOACK] = - "data not acknowledged", - [ABRT_GCALL_NOACK] = - "no acknowledgement for a general call", - [ABRT_GCALL_READ] = - "read after general call", - [ABRT_SBYTE_ACKDET] = - "start byte acknowledged", - [ABRT_SBYTE_NORSTRT] = - "trying to send start byte when restart is disabled", - [ABRT_10B_RD_NORSTRT] = - "trying to read when restart is disabled (10bit mode)", - [ABRT_MASTER_DIS] = - "trying to use disabled adapter", - [ARB_LOST] = - "lost arbitration", -}; - -static u32 dw_readl(struct dw_i2c_dev *dev, int offset) -{ - u32 value; - - if (dev->flags & ACCESS_16BIT) - value = readw_relaxed(dev->base + offset) | - (readw_relaxed(dev->base + offset + 2) << 16); - else - value = readl_relaxed(dev->base + offset); - - if (dev->flags & ACCESS_SWAP) - return swab32(value); - else - return value; -} - -static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) -{ - if (dev->flags & ACCESS_SWAP) - b = swab32(b); - - if (dev->flags & ACCESS_16BIT) { - writew_relaxed((u16)b, dev->base + offset); - writew_relaxed((u16)(b >> 16), dev->base + offset + 2); - } else { - writel_relaxed(b, dev->base + offset); - } -} static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) { @@ -212,121 +43,6 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) dw_writel(dev, dev->master_cfg, DW_IC_CON); } -static u32 -i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) -{ - /* - * DesignWare I2C core doesn't seem to have solid strategy to meet - * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec - * will result in violation of the tHD;STA spec. - */ - if (cond) - /* - * Conditional expression: - * - * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH - * - * This is based on the DW manuals, and represents an ideal - * configuration. The resulting I2C bus speed will be - * faster than any of the others. - * - * If your hardware is free from tHD;STA issue, try this one. - */ - return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset; - else - /* - * Conditional expression: - * - * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf) - * - * This is just experimental rule; the tHD;STA period turned - * out to be proportinal to (_HCNT + 3). With this setting, - * we could meet both tHIGH and tHD;STA timing specs. - * - * If unsure, you'd better to take this alternative. - * - * The reason why we need to take into account "tf" here, - * is the same as described in i2c_dw_scl_lcnt(). - */ - return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000 - - 3 + offset; -} - -static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) -{ - /* - * Conditional expression: - * - * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf) - * - * DW I2C core starts counting the SCL CNTs for the LOW period - * of the SCL clock (tLOW) as soon as it pulls the SCL line. - * In order to meet the tLOW timing spec, we need to take into - * account the fall time of SCL signal (tf). Default tf value - * should be 0.3 us, for safety. - */ - return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset; -} - -static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) -{ - dw_writel(dev, enable, DW_IC_ENABLE); -} - -static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable) -{ - int timeout = 100; - - do { - __i2c_dw_enable(dev, enable); - if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable) - return; - - /* - * Wait 10 times the signaling period of the highest I2C - * transfer supported by the driver (for 400KHz this is - * 25us) as described in the DesignWare I2C databook. - */ - usleep_range(25, 250); - } while (timeout--); - - dev_warn(dev->dev, "timeout in %sabling adapter\n", - enable ? "en" : "dis"); -} - -static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev) -{ - /* - * Clock is not necessary if we got LCNT/HCNT values directly from - * the platform code. - */ - if (WARN_ON_ONCE(!dev->get_clk_rate_khz)) - return 0; - return dev->get_clk_rate_khz(dev); -} - -static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev) -{ - int ret; - - if (!dev->acquire_lock) - return 0; - - ret = dev->acquire_lock(dev); - if (!ret) - return 0; - - dev_err(dev->dev, "couldn't acquire bus ownership\n"); - - return ret; -} - -static void i2c_dw_release_lock(struct dw_i2c_dev *dev) -{ - if (dev->release_lock) - dev->release_lock(dev); -} - /** * i2c_dw_init() - Initialize the designware I2C master hardware * @dev: device private data @@ -457,25 +173,6 @@ int i2c_dw_init(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_init); -/* - * Waiting for bus not busy - */ -static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) -{ - int timeout = TIMEOUT; - - while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { - if (timeout <= 0) { - dev_warn(dev->dev, "timeout waiting for bus ready\n"); - return -ETIMEDOUT; - } - timeout--; - usleep_range(1000, 1100); - } - - return 0; -} - static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) { struct i2c_msg *msgs = dev->msgs; @@ -708,29 +405,6 @@ i2c_dw_read(struct dw_i2c_dev *dev) } } -static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) -{ - unsigned long abort_source = dev->abort_source; - int i; - - if (abort_source & DW_IC_TX_ABRT_NOACK) { - for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) - dev_dbg(dev->dev, - "%s: %s\n", __func__, abort_sources[i]); - return -EREMOTEIO; - } - - for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) - dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]); - - if (abort_source & DW_IC_TX_ARB_LOST) - return -EAGAIN; - else if (abort_source & DW_IC_TX_ABRT_GCALL_READ) - return -EINVAL; /* wrong msgs[] data */ - else - return -EIO; -} - /* * Prepare controller for a transaction and call i2c_dw_xfer_msg. */ @@ -818,12 +492,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) return ret; } -static u32 i2c_dw_func(struct i2c_adapter *adap) -{ - struct dw_i2c_dev *dev = i2c_get_adapdata(adap); - return dev->functionality; -} - static const struct i2c_algorithm i2c_dw_algo = { .master_xfer = i2c_dw_xfer, .functionality = i2c_dw_func, @@ -946,29 +614,6 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) return IRQ_HANDLED; } -void i2c_dw_disable(struct dw_i2c_dev *dev) -{ - /* Disable controller */ - __i2c_dw_enable_and_wait(dev, false); - - /* Disable all interupts */ - dw_writel(dev, 0, DW_IC_INTR_MASK); - dw_readl(dev, DW_IC_CLR_INTR); -} -EXPORT_SYMBOL_GPL(i2c_dw_disable); - -void i2c_dw_disable_int(struct dw_i2c_dev *dev) -{ - dw_writel(dev, 0, DW_IC_INTR_MASK); -} -EXPORT_SYMBOL_GPL(i2c_dw_disable_int); - -u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) -{ - return dw_readl(dev, DW_IC_COMP_PARAM_1); -} -EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); - int i2c_dw_probe(struct dw_i2c_dev *dev) { struct i2c_adapter *adap = &dev->adapter; @@ -977,7 +622,11 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) init_completion(&dev->cmd_complete); - ret = i2c_dw_init(dev); + dev->init = i2c_dw_init; + dev->disable = i2c_dw_disable; + dev->disable_int = i2c_dw_disable_int; + + ret = dev->init(dev); if (ret) return ret; @@ -1020,5 +669,5 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_probe); -MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index ed485b69b449..86e1bd0b82e9 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -187,16 +187,19 @@ static struct dw_pci_controller dw_pci_controllers[] = { static int i2c_dw_pci_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + + i_dev->disable(i_dev); - i2c_dw_disable(pci_get_drvdata(pdev)); return 0; } static int i2c_dw_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); - return i2c_dw_init(pci_get_drvdata(pdev)); + return i_dev->init(i_dev); } #endif @@ -296,7 +299,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) { struct dw_i2c_dev *dev = pci_get_drvdata(pdev); - i2c_dw_disable(dev); + dev->disable(dev); pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index fd14b410369e..1f38c807be5f 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -356,7 +356,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); - i2c_dw_disable(dev); + dev->disable(dev); pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); @@ -400,7 +400,7 @@ static int dw_i2c_plat_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); - i2c_dw_disable(i_dev); + i_dev->disable(i_dev); i2c_dw_plat_prepare_clk(i_dev, false); return 0; @@ -412,7 +412,7 @@ static int dw_i2c_plat_resume(struct device *dev) struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); i2c_dw_plat_prepare_clk(i_dev, true); - i2c_dw_init(i_dev); + i_dev->init(i_dev); return 0; } From 04606ccc84e3c799ede8ad19fe0409c5a4892cc4 Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Wed, 14 Jun 2017 11:43:24 +0100 Subject: [PATCH 25/51] i2c: designware: introducing I2C_SLAVE definitions - Definitions were added to core library - A example was added to designware-core.txt Documentation that shows how the slave can be setup using DTS SLAVE related definitions were added to the core of the controller. Signed-off-by: Luis Oliveira Reviewed-by: Andy Shevchenko Acked-by: Rob Herring Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- .../bindings/i2c/i2c-designware.txt | 16 ++++++++- drivers/i2c/busses/i2c-designware-core.h | 33 +++++++++++++++++-- 2 files changed, 46 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index fee26dc3e858..fbb0a6d8b964 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -20,7 +20,7 @@ Optional properties : - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. This value which is by default 300ns is used to compute the tHIGH period. -Example : +Examples : i2c@f0000 { #address-cells = <1>; @@ -43,3 +43,17 @@ Example : i2c-sda-falling-time-ns = <300>; i2c-scl-falling-time-ns = <300>; }; + + i2c@1120000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <0>; + + eeprom@64 { + compatible = "linux,slave-24c02"; + reg = <0x40000064>; + }; + }; diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 661cfa869ff7..76807eafda53 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -1,5 +1,5 @@ /* - * Synopsys DesignWare I2C adapter driver (master only). + * Synopsys DesignWare I2C adapter driver. * * Based on the TI DAVINCI I2C adapter driver. * @@ -37,15 +37,20 @@ #define DW_IC_CON_SPEED_FAST 0x4 #define DW_IC_CON_SPEED_HIGH 0x6 #define DW_IC_CON_SPEED_MASK 0x6 +#define DW_IC_CON_10BITADDR_SLAVE 0x8 #define DW_IC_CON_10BITADDR_MASTER 0x10 #define DW_IC_CON_RESTART_EN 0x20 #define DW_IC_CON_SLAVE_DISABLE 0x40 +#define DW_IC_CON_STOP_DET_IFADDRESSED 0x80 +#define DW_IC_CON_TX_EMPTY_CTRL 0x100 +#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL 0x200 /* * Registers offset */ #define DW_IC_CON 0x0 #define DW_IC_TAR 0x4 +#define DW_IC_SAR 0x8 #define DW_IC_DATA_CMD 0x10 #define DW_IC_SS_SCL_HCNT 0x14 #define DW_IC_SS_SCL_LCNT 0x18 @@ -76,6 +81,7 @@ #define DW_IC_SDA_HOLD 0x7c #define DW_IC_TX_ABRT_SOURCE 0x80 #define DW_IC_ENABLE_STATUS 0x9c +#define DW_IC_CLR_RESTART_DET 0xa8 #define DW_IC_COMP_PARAM_1 0xf4 #define DW_IC_COMP_VERSION 0xf8 #define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A @@ -94,15 +100,22 @@ #define DW_IC_INTR_STOP_DET 0x200 #define DW_IC_INTR_START_DET 0x400 #define DW_IC_INTR_GEN_CALL 0x800 +#define DW_IC_INTR_RESTART_DET 0x1000 #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ DW_IC_INTR_TX_ABRT | \ DW_IC_INTR_STOP_DET) #define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ DW_IC_INTR_TX_EMPTY) +#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_RX_DONE | \ + DW_IC_INTR_RX_UNDER | \ + DW_IC_INTR_RD_REQ) + #define DW_IC_STATUS_ACTIVITY 0x1 #define DW_IC_STATUS_TFE BIT(2) #define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) +#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) #define DW_IC_SDA_HOLD_RX_SHIFT 16 #define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) @@ -115,7 +128,7 @@ #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) /* - * Status codes + * status codes */ #define STATUS_IDLE 0x0 #define STATUS_WRITE_IN_PROGRESS 0x1 @@ -123,6 +136,12 @@ #define TIMEOUT 20 /* ms */ +/* + * operation modes + */ +#define DW_IC_MASTER 0 +#define DW_IC_SLAVE 1 + /* * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register * @@ -140,6 +159,9 @@ #define ABRT_10B_RD_NORSTRT 10 #define ABRT_MASTER_DIS 11 #define ARB_LOST 12 +#define ABRT_SLAVE_FLUSH_TXFIFO 13 +#define ABRT_SLAVE_ARBLOST 14 +#define ABRT_SLAVE_RD_INTX 15 #define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) #define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) @@ -152,6 +174,9 @@ #define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) #define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) #define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) +#define DW_IC_RX_ABRT_SLAVE_RD_INTX (1UL << ABRT_SLAVE_RD_INTX) +#define DW_IC_RX_ABRT_SLAVE_ARBLOST (1UL << ABRT_SLAVE_ARBLOST) +#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO (1UL << ABRT_SLAVE_FLUSH_TXFIFO) #define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ DW_IC_TX_ABRT_10ADDR1_NOACK | \ @@ -166,6 +191,7 @@ * @base: IO registers pointer * @cmd_complete: tx completion indicator * @clk: input reference clock + * @slave: represent an I2C slave device * @cmd_err: run time hadware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs @@ -182,6 +208,7 @@ * @abort_source: copy of the TX_ABRT_SOURCE register * @irq: interrupt number for the i2c master * @adapter: i2c subsystem adapter node + * @slave_cfg: configuration for the slave device * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo * @rx_outstanding: current master-rx elements in tx fifo @@ -212,6 +239,7 @@ struct dw_i2c_dev { struct completion cmd_complete; struct clk *clk; struct reset_control *rst; + struct i2c_client *slave; u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); struct dw_pci_controller *controller; int cmd_err; @@ -231,6 +259,7 @@ struct dw_i2c_dev { struct i2c_adapter adapter; u32 functionality; u32 master_cfg; + u32 slave_cfg; unsigned int tx_fifo_depth; unsigned int rx_fifo_depth; int rx_outstanding; From f64622167f4aa5124fed264d481509829d34e126 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 24 May 2017 19:31:06 +0530 Subject: [PATCH 26/51] i2c: emev2: Handle return value of clk_prepare_enable clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-emev2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 312912708854..d2e84480fbe9 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -375,7 +375,9 @@ static int em_i2c_probe(struct platform_device *pdev) if (IS_ERR(priv->sclk)) return PTR_ERR(priv->sclk); - clk_prepare_enable(priv->sclk); + ret = clk_prepare_enable(priv->sclk); + if (ret) + return ret; priv->adap.timeout = msecs_to_jiffies(100); priv->adap.retries = 5; From b395ba21699dbbca2dbf05833a71f5fbf5245a3f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 19 Jun 2017 23:41:46 +0200 Subject: [PATCH 27/51] i2c: rcar: document HW incapabilities Add recent findings (IGNORE_NAK) and document in a bit more detail why the feature is not possible. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 214a71cb6442..030952e2ddc7 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -783,7 +783,12 @@ static int rcar_unreg_slave(struct i2c_client *slave) static u32 rcar_i2c_func(struct i2c_adapter *adap) { - /* This HW can't do SMBUS_QUICK and NOSTART */ + /* + * This HW can't do: + * I2C_SMBUS_QUICK (setting FSB during START didn't work) + * I2C_M_NOSTART (automatically sends address after START) + * I2C_M_IGNORE_NAK (automatically sends STOP after NAK) + */ return I2C_FUNC_I2C | I2C_FUNC_SLAVE | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); } From 10a6218e382d9fafd4c2add1b171d89a079c5a47 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Tue, 20 Jun 2017 14:15:14 -0700 Subject: [PATCH 28/51] i2c: aspeed: added documentation for Aspeed I2C driver Added device tree binding documentation for Aspeed I2C busses. Signed-off-by: Brendan Higgins Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-aspeed.txt | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt new file mode 100644 index 000000000000..bd6480b19535 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -0,0 +1,48 @@ +Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs. + +Required Properties: +- #address-cells : should be 1 +- #size-cells : should be 0 +- reg : address offset and range of bus +- compatible : should be "aspeed,ast2400-i2c-bus" + or "aspeed,ast2500-i2c-bus" +- clocks : root clock of bus, should reference the APB + clock +- interrupts : interrupt number +- interrupt-parent : interrupt controller for bus, should reference a + aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic + interrupt controller + +Optional Properties: +- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not + specified +- multi-master : states that there is another master active on this bus. + +Example: + +i2c { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; + + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x40 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + }; +}; From f327c686d3ba44eda79a2d9e02a6a242e0b75787 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Tue, 20 Jun 2017 14:15:15 -0700 Subject: [PATCH 29/51] i2c: aspeed: added driver for Aspeed I2C Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-aspeed.c | 690 ++++++++++++++++++++++++++++++++ 3 files changed, 701 insertions(+) create mode 100644 drivers/i2c/busses/i2c-aspeed.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ed7106e48ba4..ceb4df4e92ab 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -328,6 +328,16 @@ config I2C_POWERMAC comment "I2C system bus drivers (mostly embedded / system-on-chip)" +config I2C_ASPEED + tristate "Aspeed I2C Controller" + depends on ARCH_ASPEED || COMPILE_TEST + help + If you say yes to this option, support will be included for the + Aspeed I2C controller. + + This driver can also be built as a module. If so, the module + will be called i2c-aspeed. + config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" depends on ARCH_AT91 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index c89a4314c563..a43f28819a8c 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers +obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c new file mode 100644 index 000000000000..55f241f2cfcc --- /dev/null +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -0,0 +1,690 @@ +/* + * Aspeed 24XX/25XX I2C Controller. + * + * Copyright (C) 2012-2017 ASPEED Technology Inc. + * Copyright 2017 IBM Corporation + * Copyright 2017 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* I2C Register */ +#define ASPEED_I2C_FUN_CTRL_REG 0x00 +#define ASPEED_I2C_AC_TIMING_REG1 0x04 +#define ASPEED_I2C_AC_TIMING_REG2 0x08 +#define ASPEED_I2C_INTR_CTRL_REG 0x0c +#define ASPEED_I2C_INTR_STS_REG 0x10 +#define ASPEED_I2C_CMD_REG 0x14 +#define ASPEED_I2C_DEV_ADDR_REG 0x18 +#define ASPEED_I2C_BYTE_BUF_REG 0x20 + +/* Global Register Definition */ +/* 0x00 : I2C Interrupt Status Register */ +/* 0x08 : I2C Interrupt Target Assignment */ + +/* Device Register Definition */ +/* 0x00 : I2CD Function Control Register */ +#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) +#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) +#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) +#define ASPEED_I2CD_MASTER_EN BIT(0) + +/* 0x04 : I2CD Clock and AC Timing Control Register #1 */ +#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16 +#define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16) +#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12 +#define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12) +#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0) +#define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0) +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */ +#define ASPEED_NO_TIMEOUT_CTRL 0 + +/* 0x0c : I2CD Interrupt Control Register & + * 0x10 : I2CD Interrupt Status Register + * + * These share bit definitions, so use the same values for the enable & + * status bits. + */ +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) +#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) +#define ASPEED_I2CD_INTR_ABNORMAL BIT(5) +#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) +#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3) +#define ASPEED_I2CD_INTR_RX_DONE BIT(2) +#define ASPEED_I2CD_INTR_TX_NAK BIT(1) +#define ASPEED_I2CD_INTR_TX_ACK BIT(0) +#define ASPEED_I2CD_INTR_ALL \ + (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ + ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \ + ASPEED_I2CD_INTR_SCL_TIMEOUT | \ + ASPEED_I2CD_INTR_ABNORMAL | \ + ASPEED_I2CD_INTR_NORMAL_STOP | \ + ASPEED_I2CD_INTR_ARBIT_LOSS | \ + ASPEED_I2CD_INTR_RX_DONE | \ + ASPEED_I2CD_INTR_TX_NAK | \ + ASPEED_I2CD_INTR_TX_ACK) + +/* 0x14 : I2CD Command/Status Register */ +#define ASPEED_I2CD_SCL_LINE_STS BIT(18) +#define ASPEED_I2CD_SDA_LINE_STS BIT(17) +#define ASPEED_I2CD_BUS_BUSY_STS BIT(16) +#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) + +/* Command Bit */ +#define ASPEED_I2CD_M_STOP_CMD BIT(5) +#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) +#define ASPEED_I2CD_M_RX_CMD BIT(3) +#define ASPEED_I2CD_S_TX_CMD BIT(2) +#define ASPEED_I2CD_M_TX_CMD BIT(1) +#define ASPEED_I2CD_M_START_CMD BIT(0) + +enum aspeed_i2c_master_state { + ASPEED_I2C_MASTER_START, + ASPEED_I2C_MASTER_TX_FIRST, + ASPEED_I2C_MASTER_TX, + ASPEED_I2C_MASTER_RX_FIRST, + ASPEED_I2C_MASTER_RX, + ASPEED_I2C_MASTER_STOP, + ASPEED_I2C_MASTER_INACTIVE, +}; + +struct aspeed_i2c_bus { + struct i2c_adapter adap; + struct device *dev; + void __iomem *base; + /* Synchronizes I/O mem access to base. */ + spinlock_t lock; + struct completion cmd_complete; + unsigned long parent_clk_frequency; + u32 bus_frequency; + /* Transaction state. */ + enum aspeed_i2c_master_state master_state; + struct i2c_msg *msgs; + size_t buf_index; + size_t msgs_index; + size_t msgs_count; + bool send_stop; + int cmd_err; + /* Protected only by i2c_lock_bus */ + int master_xfer_result; +}; + +static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); + +static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) +{ + unsigned long time_left, flags; + int ret = 0; + u32 command; + + spin_lock_irqsave(&bus->lock, flags); + command = readl(bus->base + ASPEED_I2C_CMD_REG); + + if (command & ASPEED_I2CD_SDA_LINE_STS) { + /* Bus is idle: no recovery needed. */ + if (command & ASPEED_I2CD_SCL_LINE_STS) + goto out; + dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n", + command); + + reinit_completion(&bus->cmd_complete); + writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout( + &bus->cmd_complete, bus->adap.timeout); + + spin_lock_irqsave(&bus->lock, flags); + if (time_left == 0) + goto reset_out; + else if (bus->cmd_err) + goto reset_out; + /* Recovery failed. */ + else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_SCL_LINE_STS)) + goto reset_out; + /* Bus error. */ + } else { + dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n", + command); + + reinit_completion(&bus->cmd_complete); + /* Writes 1 to 8 SCL clock cycles until SDA is released. */ + writel(ASPEED_I2CD_BUS_RECOVER_CMD, + bus->base + ASPEED_I2C_CMD_REG); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout( + &bus->cmd_complete, bus->adap.timeout); + + spin_lock_irqsave(&bus->lock, flags); + if (time_left == 0) + goto reset_out; + else if (bus->cmd_err) + goto reset_out; + /* Recovery failed. */ + else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_SDA_LINE_STS)) + goto reset_out; + } + +out: + spin_unlock_irqrestore(&bus->lock, flags); + + return ret; + +reset_out: + spin_unlock_irqrestore(&bus->lock, flags); + + return aspeed_i2c_reset(bus); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) +{ + u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; + struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; + u8 slave_addr = msg->addr << 1; + + bus->master_state = ASPEED_I2C_MASTER_START; + bus->buf_index = 0; + + if (msg->flags & I2C_M_RD) { + slave_addr |= 1; + command |= ASPEED_I2CD_M_RX_CMD; + /* Need to let the hardware know to NACK after RX. */ + if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } + + writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(command, bus->base + ASPEED_I2C_CMD_REG); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus) +{ + bus->master_state = ASPEED_I2C_MASTER_STOP; + writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus) +{ + if (bus->msgs_index + 1 < bus->msgs_count) { + bus->msgs_index++; + aspeed_i2c_do_start(bus); + } else { + aspeed_i2c_do_stop(bus); + } +} + +static int aspeed_i2c_is_irq_error(u32 irq_status) +{ + if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS) + return -EAGAIN; + if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | + ASPEED_I2CD_INTR_SCL_TIMEOUT)) + return -EBUSY; + if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL)) + return -EPROTO; + + return 0; +} + +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) +{ + u32 irq_status, status_ack = 0, command = 0; + struct i2c_msg *msg; + u8 recv_byte; + int ret; + + spin_lock(&bus->lock); + irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG); + /* Ack all interrupt bits. */ + writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG); + + if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; + goto out_complete; + } + + /* + * We encountered an interrupt that reports an error: the hardware + * should clear the command queue effectively taking us back to the + * INACTIVE state. + */ + ret = aspeed_i2c_is_irq_error(irq_status); + if (ret < 0) { + dev_dbg(bus->dev, "received error interrupt: 0x%08x", + irq_status); + bus->cmd_err = ret; + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + goto out_complete; + } + + /* We are in an invalid state; reset bus to a known state. */ + if (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP) { + dev_err(bus->dev, "bus in unknown state"); + bus->cmd_err = -EIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + msg = &bus->msgs[bus->msgs_index]; + + /* + * START is a special case because we still have to handle a subsequent + * TX or RX immediately after we handle it, so we handle it here and + * then update the state and handle the new state below. + */ + if (bus->master_state == ASPEED_I2C_MASTER_START) { + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { + pr_devel("no slave present at %02x", msg->addr); + status_ack |= ASPEED_I2CD_INTR_TX_NAK; + bus->cmd_err = -ENXIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + status_ack |= ASPEED_I2CD_INTR_TX_ACK; + if (msg->len == 0) { /* SMBUS_QUICK */ + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + if (msg->flags & I2C_M_RD) + bus->master_state = ASPEED_I2C_MASTER_RX_FIRST; + else + bus->master_state = ASPEED_I2C_MASTER_TX_FIRST; + } + + switch (bus->master_state) { + case ASPEED_I2C_MASTER_TX: + if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { + dev_dbg(bus->dev, "slave NACKed TX"); + status_ack |= ASPEED_I2CD_INTR_TX_NAK; + goto error_and_stop; + } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { + dev_err(bus->dev, "slave failed to ACK TX"); + goto error_and_stop; + } + status_ack |= ASPEED_I2CD_INTR_TX_ACK; + /* fallthrough intended */ + case ASPEED_I2C_MASTER_TX_FIRST: + if (bus->buf_index < msg->len) { + bus->master_state = ASPEED_I2C_MASTER_TX; + writel(msg->buf[bus->buf_index++], + bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(ASPEED_I2CD_M_TX_CMD, + bus->base + ASPEED_I2C_CMD_REG); + } else { + aspeed_i2c_next_msg_or_stop(bus); + } + goto out_no_complete; + case ASPEED_I2C_MASTER_RX_FIRST: + /* RX may not have completed yet (only address cycle) */ + if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) + goto out_no_complete; + /* fallthrough intended */ + case ASPEED_I2C_MASTER_RX: + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { + dev_err(bus->dev, "master failed to RX"); + goto error_and_stop; + } + status_ack |= ASPEED_I2CD_INTR_RX_DONE; + + recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; + msg->buf[bus->buf_index++] = recv_byte; + + if (msg->flags & I2C_M_RECV_LEN) { + if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { + bus->cmd_err = -EPROTO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + msg->len = recv_byte + + ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); + msg->flags &= ~I2C_M_RECV_LEN; + } + + if (bus->buf_index < msg->len) { + bus->master_state = ASPEED_I2C_MASTER_RX; + command = ASPEED_I2CD_M_RX_CMD; + if (bus->buf_index + 1 == msg->len) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + writel(command, bus->base + ASPEED_I2C_CMD_REG); + } else { + aspeed_i2c_next_msg_or_stop(bus); + } + goto out_no_complete; + case ASPEED_I2C_MASTER_STOP: + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { + dev_err(bus->dev, "master failed to STOP"); + bus->cmd_err = -EIO; + /* Do not STOP as we have already tried. */ + } else { + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP; + } + + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + goto out_complete; + case ASPEED_I2C_MASTER_INACTIVE: + dev_err(bus->dev, + "master received interrupt 0x%08x, but is inactive", + irq_status); + bus->cmd_err = -EIO; + /* Do not STOP as we should be inactive. */ + goto out_complete; + default: + WARN(1, "unknown master state\n"); + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + bus->cmd_err = -EINVAL; + goto out_complete; + } +error_and_stop: + bus->cmd_err = -EIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; +out_complete: + bus->msgs = NULL; + if (bus->cmd_err) + bus->master_xfer_result = bus->cmd_err; + else + bus->master_xfer_result = bus->msgs_index + 1; + complete(&bus->cmd_complete); +out_no_complete: + if (irq_status != status_ack) + dev_err(bus->dev, + "irq handled != irq. expected 0x%08x, but was 0x%08x\n", + irq_status, status_ack); + spin_unlock(&bus->lock); + return !!irq_status; +} + +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) +{ + struct aspeed_i2c_bus *bus = dev_id; + + return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE; +} + +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); + unsigned long time_left, flags; + int ret = 0; + + spin_lock_irqsave(&bus->lock, flags); + bus->cmd_err = 0; + + /* If bus is busy, attempt recovery. We assume a single master + * environment. + */ + if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) { + spin_unlock_irqrestore(&bus->lock, flags); + ret = aspeed_i2c_recover_bus(bus); + if (ret) + return ret; + spin_lock_irqsave(&bus->lock, flags); + } + + bus->cmd_err = 0; + bus->msgs = msgs; + bus->msgs_index = 0; + bus->msgs_count = num; + + reinit_completion(&bus->cmd_complete); + aspeed_i2c_do_start(bus); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout(&bus->cmd_complete, + bus->adap.timeout); + + if (time_left == 0) + return -ETIMEDOUT; + else + return bus->master_xfer_result; +} + +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm aspeed_i2c_algo = { + .master_xfer = aspeed_i2c_master_xfer, + .functionality = aspeed_i2c_functionality, +}; + +static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) +{ + u32 base_clk, clk_high, clk_low, tmp; + + /* + * The actual clock frequency of SCL is: + * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low)) + * = APB_freq / divisor + * where base_freq is a programmable clock divider; its value is + * base_freq = 1 << base_clk + * SCL_high is the number of base_freq clock cycles that SCL stays high + * and SCL_low is the number of base_freq clock cycles that SCL stays + * low for a period of SCL. + * The actual register has a minimum SCL_high and SCL_low minimum of 1; + * thus, they start counting at zero. So + * SCL_high = clk_high + 1 + * SCL_low = clk_low + 1 + * Thus, + * SCL_freq = APB_freq / + * ((1 << base_clk) * (clk_high + 1 + clk_low + 1)) + * The documentation recommends clk_high >= 8 and clk_low >= 7 when + * possible; this last constraint gives us the following solution: + */ + base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0; + tmp = divisor / (1 << base_clk); + clk_high = tmp / 2 + tmp % 2; + clk_low = tmp - clk_high; + + clk_high -= 1; + clk_low -= 1; + + return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) + & ASPEED_I2CD_TIME_SCL_HIGH_MASK) + | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT) + & ASPEED_I2CD_TIME_SCL_LOW_MASK) + | (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); +} + +/* precondition: bus.lock has been acquired. */ +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) +{ + u32 divisor, clk_reg_val; + + divisor = bus->parent_clk_frequency / bus->bus_frequency; + clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor); + writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); + writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); + + return 0; +} + +/* precondition: bus.lock has been acquired. */ +static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, + struct platform_device *pdev) +{ + u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN; + int ret; + + /* Disable everything. */ + writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); + + ret = aspeed_i2c_init_clk(bus); + if (ret < 0) + return ret; + + if (!of_property_read_bool(pdev->dev.of_node, "multi-master")) + fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; + + /* Enable Master Mode */ + writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, + bus->base + ASPEED_I2C_FUN_CTRL_REG); + + /* Set interrupt generation of I2C controller */ + writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); + + return 0; +} + +static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) +{ + struct platform_device *pdev = to_platform_device(bus->dev); + unsigned long flags; + int ret; + + spin_lock_irqsave(&bus->lock, flags); + + /* Disable and ack all interrupts. */ + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); + + ret = aspeed_i2c_init(bus, pdev); + + spin_unlock_irqrestore(&bus->lock, flags); + + return ret; +} + +static int aspeed_i2c_probe_bus(struct platform_device *pdev) +{ + struct aspeed_i2c_bus *bus; + struct clk *parent_clk; + struct resource *res; + int irq, ret; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bus->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(bus->base)) + return PTR_ERR(bus->base); + + parent_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(parent_clk)) + return PTR_ERR(parent_clk); + bus->parent_clk_frequency = clk_get_rate(parent_clk); + /* We just need the clock rate, we don't actually use the clk object. */ + devm_clk_put(&pdev->dev, parent_clk); + + ret = of_property_read_u32(pdev->dev.of_node, + "bus-frequency", &bus->bus_frequency); + if (ret < 0) { + dev_err(&pdev->dev, + "Could not read bus-frequency property\n"); + bus->bus_frequency = 100000; + } + + /* Initialize the I2C adapter */ + spin_lock_init(&bus->lock); + init_completion(&bus->cmd_complete); + bus->adap.owner = THIS_MODULE; + bus->adap.retries = 0; + bus->adap.timeout = 5 * HZ; + bus->adap.algo = &aspeed_i2c_algo; + bus->adap.dev.parent = &pdev->dev; + bus->adap.dev.of_node = pdev->dev.of_node; + strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name)); + i2c_set_adapdata(&bus->adap, bus); + + bus->dev = &pdev->dev; + + /* Clean up any left over interrupt state. */ + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); + /* + * bus.lock does not need to be held because the interrupt handler has + * not been enabled yet. + */ + ret = aspeed_i2c_init(bus, pdev); + if (ret < 0) + return ret; + + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq, + 0, dev_name(&pdev->dev), bus); + if (ret < 0) + return ret; + + ret = i2c_add_adapter(&bus->adap); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, bus); + + dev_info(bus->dev, "i2c bus %d registered, irq %d\n", + bus->adap.nr, irq); + + return 0; +} + +static int aspeed_i2c_remove_bus(struct platform_device *pdev) +{ + struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&bus->lock, flags); + + /* Disable everything. */ + writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + + spin_unlock_irqrestore(&bus->lock, flags); + + i2c_del_adapter(&bus->adap); + + return 0; +} + +static const struct of_device_id aspeed_i2c_bus_of_table[] = { + { .compatible = "aspeed,ast2400-i2c-bus", }, + { .compatible = "aspeed,ast2500-i2c-bus", }, + { }, +}; +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); + +static struct platform_driver aspeed_i2c_bus_driver = { + .probe = aspeed_i2c_probe_bus, + .remove = aspeed_i2c_remove_bus, + .driver = { + .name = "aspeed-i2c-bus", + .of_match_table = aspeed_i2c_bus_of_table, + }, +}; +module_platform_driver(aspeed_i2c_bus_driver); + +MODULE_AUTHOR("Brendan Higgins "); +MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); +MODULE_LICENSE("GPL v2"); From f9eb91350bb20b3e881bc59158071e14ee4f0326 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Tue, 20 Jun 2017 14:15:16 -0700 Subject: [PATCH 30/51] i2c: aspeed: added slave support for Aspeed I2C driver Added slave support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-aspeed.c | 201 ++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 55f241f2cfcc..f19348328a71 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -49,6 +49,7 @@ #define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) #define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) +#define ASPEED_I2CD_SLAVE_EN BIT(1) #define ASPEED_I2CD_MASTER_EN BIT(0) /* 0x04 : I2CD Clock and AC Timing Control Register #1 */ @@ -69,6 +70,7 @@ */ #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) +#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7) #define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) #define ASPEED_I2CD_INTR_ABNORMAL BIT(5) #define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) @@ -101,6 +103,9 @@ #define ASPEED_I2CD_M_TX_CMD BIT(1) #define ASPEED_I2CD_M_START_CMD BIT(0) +/* 0x18 : I2CD Slave Device Address Register */ +#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) + enum aspeed_i2c_master_state { ASPEED_I2C_MASTER_START, ASPEED_I2C_MASTER_TX_FIRST, @@ -111,6 +116,15 @@ enum aspeed_i2c_master_state { ASPEED_I2C_MASTER_INACTIVE, }; +enum aspeed_i2c_slave_state { + ASPEED_I2C_SLAVE_START, + ASPEED_I2C_SLAVE_READ_REQUESTED, + ASPEED_I2C_SLAVE_READ_PROCESSED, + ASPEED_I2C_SLAVE_WRITE_REQUESTED, + ASPEED_I2C_SLAVE_WRITE_RECEIVED, + ASPEED_I2C_SLAVE_STOP, +}; + struct aspeed_i2c_bus { struct i2c_adapter adap; struct device *dev; @@ -130,6 +144,10 @@ struct aspeed_i2c_bus { int cmd_err; /* Protected only by i2c_lock_bus */ int master_xfer_result; +#if IS_ENABLED(CONFIG_I2C_SLAVE) + struct i2c_client *slave; + enum aspeed_i2c_slave_state slave_state; +#endif /* CONFIG_I2C_SLAVE */ }; static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); @@ -202,6 +220,110 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) return aspeed_i2c_reset(bus); } +#if IS_ENABLED(CONFIG_I2C_SLAVE) +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus) +{ + u32 command, irq_status, status_ack = 0; + struct i2c_client *slave = bus->slave; + bool irq_handled = true; + u8 value; + + spin_lock(&bus->lock); + if (!slave) { + irq_handled = false; + goto out; + } + + command = readl(bus->base + ASPEED_I2C_CMD_REG); + irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG); + + /* Slave was requested, restart state machine. */ + if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) { + status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH; + bus->slave_state = ASPEED_I2C_SLAVE_START; + } + + /* Slave is not currently active, irq was for someone else. */ + if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) { + irq_handled = false; + goto out; + } + + dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n", + irq_status, command); + + /* Slave was sent something. */ + if (irq_status & ASPEED_I2CD_INTR_RX_DONE) { + value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; + /* Handle address frame. */ + if (bus->slave_state == ASPEED_I2C_SLAVE_START) { + if (value & 0x1) + bus->slave_state = + ASPEED_I2C_SLAVE_READ_REQUESTED; + else + bus->slave_state = + ASPEED_I2C_SLAVE_WRITE_REQUESTED; + } + status_ack |= ASPEED_I2CD_INTR_RX_DONE; + } + + /* Slave was asked to stop. */ + if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) { + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP; + bus->slave_state = ASPEED_I2C_SLAVE_STOP; + } + if (irq_status & ASPEED_I2CD_INTR_TX_NAK) { + status_ack |= ASPEED_I2CD_INTR_TX_NAK; + bus->slave_state = ASPEED_I2C_SLAVE_STOP; + } + + switch (bus->slave_state) { + case ASPEED_I2C_SLAVE_READ_REQUESTED: + if (irq_status & ASPEED_I2CD_INTR_TX_ACK) + dev_err(bus->dev, "Unexpected ACK on read request.\n"); + bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED; + + i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); + writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); + break; + case ASPEED_I2C_SLAVE_READ_PROCESSED: + status_ack |= ASPEED_I2CD_INTR_TX_ACK; + if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK)) + dev_err(bus->dev, + "Expected ACK after processed read.\n"); + i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value); + writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); + break; + case ASPEED_I2C_SLAVE_WRITE_REQUESTED: + bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED; + i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); + break; + case ASPEED_I2C_SLAVE_WRITE_RECEIVED: + i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value); + break; + case ASPEED_I2C_SLAVE_STOP: + i2c_slave_event(slave, I2C_SLAVE_STOP, &value); + break; + default: + dev_err(bus->dev, "unhandled slave_state: %d\n", + bus->slave_state); + break; + } + + if (status_ack != irq_status) + dev_err(bus->dev, + "irq handled != irq. expected %x, but was %x\n", + irq_status, status_ack); + writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG); + +out: + spin_unlock(&bus->lock); + return irq_handled; +} +#endif /* CONFIG_I2C_SLAVE */ + /* precondition: bus.lock has been acquired. */ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) { @@ -427,6 +549,13 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) { struct aspeed_i2c_bus *bus = dev_id; +#if IS_ENABLED(CONFIG_I2C_SLAVE) + if (aspeed_i2c_slave_irq(bus)) { + dev_dbg(bus->dev, "irq handled by slave.\n"); + return IRQ_HANDLED; + } +#endif /* CONFIG_I2C_SLAVE */ + return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE; } @@ -474,9 +603,75 @@ static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; } +#if IS_ENABLED(CONFIG_I2C_SLAVE) +/* precondition: bus.lock has been acquired. */ +static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr) +{ + u32 addr_reg_val, func_ctrl_reg_val; + + /* Set slave addr. */ + addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG); + addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK; + addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK; + writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG); + + /* Turn on slave mode. */ + func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); + func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN; + writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); +} + +static int aspeed_i2c_reg_slave(struct i2c_client *client) +{ + struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); + unsigned long flags; + + spin_lock_irqsave(&bus->lock, flags); + if (bus->slave) { + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + + __aspeed_i2c_reg_slave(bus, client->addr); + + bus->slave = client; + bus->slave_state = ASPEED_I2C_SLAVE_STOP; + spin_unlock_irqrestore(&bus->lock, flags); + + return 0; +} + +static int aspeed_i2c_unreg_slave(struct i2c_client *client) +{ + struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); + u32 func_ctrl_reg_val; + unsigned long flags; + + spin_lock_irqsave(&bus->lock, flags); + if (!bus->slave) { + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + + /* Turn off slave mode. */ + func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); + func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN; + writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); + + bus->slave = NULL; + spin_unlock_irqrestore(&bus->lock, flags); + + return 0; +} +#endif /* CONFIG_I2C_SLAVE */ + static const struct i2c_algorithm aspeed_i2c_algo = { .master_xfer = aspeed_i2c_master_xfer, .functionality = aspeed_i2c_functionality, +#if IS_ENABLED(CONFIG_I2C_SLAVE) + .reg_slave = aspeed_i2c_reg_slave, + .unreg_slave = aspeed_i2c_unreg_slave, +#endif /* CONFIG_I2C_SLAVE */ }; static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) @@ -551,6 +746,12 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, bus->base + ASPEED_I2C_FUN_CTRL_REG); +#if IS_ENABLED(CONFIG_I2C_SLAVE) + /* If slave has already been registered, re-enable it. */ + if (bus->slave) + __aspeed_i2c_reg_slave(bus, bus->slave->addr); +#endif /* CONFIG_I2C_SLAVE */ + /* Set interrupt generation of I2C controller */ writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); From 413dfbbfca54904760aa04af40ca26e2a70f3eda Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Tue, 20 Jun 2017 14:15:13 -0700 Subject: [PATCH 31/51] MAINTAINERS: add entry for Aspeed I2C driver Added myself as maintainer of the Aspeed I2C driver and the associated I2C interrupt controller and added Joel Stanley and Benjamin Herrenschmidt as reviewers. Signed-off-by: Brendan Higgins Signed-off-by: Wolfram Sang --- MAINTAINERS | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 34b0324d53c5..e83769d59e5b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1123,6 +1123,18 @@ F: arch/arm/mach-aspeed/ F: arch/arm/boot/dts/aspeed-* F: drivers/*/*aspeed* +ARM/ASPEED I2C DRIVER +M: Brendan Higgins +R: Benjamin Herrenschmidt +R: Joel Stanley +L: linux-i2c@vger.kernel.org +L: openbmc@lists.ozlabs.org +S: Maintained +F: drivers/irqchip/irq-aspeed-i2c-ic.c +F: drivers/i2c/busses/i2c-aspeed.c +F: Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt +F: Documentation/devicetree/bindings/i2c/i2c-aspeed.txt + ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT M: Nicolas Ferre M: Alexandre Belloni From 606fd2788b0fce6f5138078a4fbe8979ecba5697 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 21 Jun 2017 09:24:02 +0200 Subject: [PATCH 32/51] i2c: algo-bit: add support for I2C_M_STOP Support for enforced STOPs will allow us to use SCCB compatible devices. Based on a preliminary patch by Wolfram Sang. Signed-off-by: Jean Delvare Tested-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/algos/i2c-algo-bit.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index a8e89df665b9..1147bddb8b2c 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -553,9 +553,16 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; if (!(pmsg->flags & I2C_M_NOSTART)) { if (i) { - bit_dbg(3, &i2c_adap->dev, "emitting " - "repeated start condition\n"); - i2c_repstart(adap); + if (msgs[i - 1].flags & I2C_M_STOP) { + bit_dbg(3, &i2c_adap->dev, + "emitting enforced stop/start condition\n"); + i2c_stop(adap); + i2c_start(adap); + } else { + bit_dbg(3, &i2c_adap->dev, + "emitting repeated start condition\n"); + i2c_repstart(adap); + } } ret = bit_doAddress(i2c_adap, pmsg); if ((ret != 0) && !nak_ok) { From c0022504b500c4394ff106f0f13acb879ab2c70f Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Thu, 22 Jun 2017 20:56:54 +0800 Subject: [PATCH 33/51] dt: bindings: add documentation for zx2967 family i2c controller This patch adds dt-binding documentation for zx2967 family i2c controller. Signed-off-by: Baoyou Xie Acked-by: Rob Herring Signed-off-by: Shawn Guo Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-zx2967.txt | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt new file mode 100644 index 000000000000..cb806d1ae4c9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt @@ -0,0 +1,22 @@ +ZTE zx2967 I2C controller + +Required properties: + - compatible: must be "zte,zx296718-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + - clock-frequency: the desired I2C bus clock frequency. + +Examples: + + i2c@112000 { + compatible = "zte,zx296718-i2c"; + reg = <0x00112000 0x1000>; + interrupts = ; + clocks = <&osc24m>; + #address-cells = <1> + #size-cells = <0>; + clock-frequency = <1600000>; + }; From 9615a01f71ca02858f5265b1b545280758562aa2 Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Thu, 22 Jun 2017 20:56:55 +0800 Subject: [PATCH 34/51] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family This patch adds i2c controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie Reviewed-by: Andy Shevchenko Reviewed-by: Jun Nie Signed-off-by: Shawn Guo Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-zx2967.c | 609 ++++++++++++++++++++++++++++++++ 3 files changed, 619 insertions(+) create mode 100644 drivers/i2c/busses/i2c-zx2967.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ceb4df4e92ab..5134b3cde14e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1270,4 +1270,13 @@ config I2C_OPAL This driver can also be built as a module. If so, the module will be called as i2c-opal. +config I2C_ZX2967 + tristate "ZTE ZX2967 I2C support" + depends on ARCH_ZX || COMPILE_TEST + default y + help + Selecting this option will add ZX2967 I2C driver. + This driver can also be built as a module. If so, the module will be + called i2c-zx2967. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index a43f28819a8c..a84651134048 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o +obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c new file mode 100644 index 000000000000..3e381edc0f22 --- /dev/null +++ b/drivers/i2c/busses/i2c-zx2967.c @@ -0,0 +1,609 @@ +/* + * Copyright (C) 2017 Sanechips Technology Co., Ltd. + * Copyright 2017 Linaro Ltd. + * + * Author: Baoyou Xie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define REG_CMD 0x04 +#define REG_DEVADDR_H 0x0C +#define REG_DEVADDR_L 0x10 +#define REG_CLK_DIV_FS 0x14 +#define REG_CLK_DIV_HS 0x18 +#define REG_WRCONF 0x1C +#define REG_RDCONF 0x20 +#define REG_DATA 0x24 +#define REG_STAT 0x28 + +#define I2C_STOP 0 +#define I2C_MASTER BIT(0) +#define I2C_ADDR_MODE_TEN BIT(1) +#define I2C_IRQ_MSK_ENABLE BIT(3) +#define I2C_RW_READ BIT(4) +#define I2C_CMB_RW_EN BIT(5) +#define I2C_START BIT(6) + +#define I2C_ADDR_LOW_MASK GENMASK(6, 0) +#define I2C_ADDR_LOW_SHIFT 0 +#define I2C_ADDR_HI_MASK GENMASK(2, 0) +#define I2C_ADDR_HI_SHIFT 7 + +#define I2C_WFIFO_RESET BIT(7) +#define I2C_RFIFO_RESET BIT(7) + +#define I2C_IRQ_ACK_CLEAR BIT(7) +#define I2C_INT_MASK GENMASK(6, 0) + +#define I2C_TRANS_DONE BIT(0) +#define I2C_SR_EDEVICE BIT(1) +#define I2C_SR_EDATA BIT(2) + +#define I2C_FIFO_MAX 16 + +#define I2C_TIMEOUT msecs_to_jiffies(1000) + +#define DEV(i2c) (&i2c->adap.dev) + +struct zx2967_i2c { + struct i2c_adapter adap; + struct clk *clk; + struct completion complete; + u32 clk_freq; + void __iomem *reg_base; + size_t residue; + int irq; + int msg_rd; + u8 *cur_trans; + u8 access_cnt; + bool is_suspended; + int error; +}; + +static void zx2967_i2c_writel(struct zx2967_i2c *i2c, + u32 val, unsigned long reg) +{ + writel_relaxed(val, i2c->reg_base + reg); +} + +static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg) +{ + return readl_relaxed(i2c->reg_base + reg); +} + +static void zx2967_i2c_writesb(struct zx2967_i2c *i2c, + void *data, unsigned long reg, int len) +{ + writesb(i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_readsb(struct zx2967_i2c *i2c, + void *data, unsigned long reg, int len) +{ + readsb(i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c) +{ + u32 status; + u32 ctl; + + status = zx2967_i2c_readl(i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(i2c, status, REG_STAT); + + ctl = zx2967_i2c_readl(i2c, REG_CMD); + if (i2c->msg_rd) + ctl |= I2C_RW_READ; + else + ctl &= ~I2C_RW_READ; + ctl &= ~I2C_CMB_RW_EN; + ctl |= I2C_START; + zx2967_i2c_writel(i2c, ctl, REG_CMD); +} + +static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c) +{ + u32 offset; + u32 val; + + if (i2c->msg_rd) { + offset = REG_RDCONF; + val = I2C_RFIFO_RESET; + } else { + offset = REG_WRCONF; + val = I2C_WFIFO_RESET; + } + + val |= zx2967_i2c_readl(i2c, offset); + zx2967_i2c_writel(i2c, val, offset); +} + +static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size) +{ + u8 val[I2C_FIFO_MAX] = {0}; + int i; + + if (size > I2C_FIFO_MAX) { + dev_err(DEV(i2c), "fifo size %d over the max value %d\n", + size, I2C_FIFO_MAX); + return -EINVAL; + } + + zx2967_i2c_readsb(i2c, val, REG_DATA, size); + for (i = 0; i < size; i++) { + *i2c->cur_trans++ = val[i]; + i2c->residue--; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c) +{ + size_t residue = i2c->residue; + u8 *buf = i2c->cur_trans; + + if (residue == 0) { + dev_err(DEV(i2c), "residue is %d\n", (int)residue); + return -EINVAL; + } + + if (residue <= I2C_FIFO_MAX) { + zx2967_i2c_writesb(i2c, buf, REG_DATA, residue); + + /* Again update before writing to FIFO to make sure isr sees. */ + i2c->residue = 0; + i2c->cur_trans = NULL; + } else { + zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX); + i2c->residue -= I2C_FIFO_MAX; + i2c->cur_trans += I2C_FIFO_MAX; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c) +{ + u32 val; + u32 clk_div; + + val = I2C_MASTER | I2C_IRQ_MSK_ENABLE; + zx2967_i2c_writel(i2c, val, REG_CMD); + + clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1; + zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS); + zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS); + + zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF); + zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF); + zx2967_i2c_writel(i2c, 1, REG_RDCONF); + + zx2967_i2c_flush_fifos(i2c); + + return 0; +} + +static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c) +{ + u32 status; + + status = zx2967_i2c_readl(i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(i2c, status, REG_STAT); +} + +static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id) +{ + u32 status; + struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id; + + status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK; + zx2967_i2c_isr_clr(i2c); + + if (status & I2C_SR_EDEVICE) + i2c->error = -ENXIO; + else if (status & I2C_SR_EDATA) + i2c->error = -EIO; + else if (status & I2C_TRANS_DONE) + i2c->error = 0; + else + goto done; + + complete(&i2c->complete); +done: + return IRQ_HANDLED; +} + +static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr) +{ + u16 val; + + val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK; + zx2967_i2c_writel(i2c, val, REG_DEVADDR_L); + + val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK; + zx2967_i2c_writel(i2c, val, REG_DEVADDR_H); + if (val) + val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN; + else + val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN; + zx2967_i2c_writel(i2c, val, REG_CMD); +} + +static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes) +{ + unsigned long time_left; + int rd = i2c->msg_rd; + int ret; + + reinit_completion(&i2c->complete); + + if (rd) { + zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF); + } else { + ret = zx2967_i2c_fill_tx_fifo(i2c); + if (ret) + return ret; + } + + zx2967_i2c_start_ctrl(i2c); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0; +} + +static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c, + struct i2c_msg *msg) +{ + int ret; + int i; + + if (msg->len == 0) + return -EINVAL; + + zx2967_i2c_flush_fifos(i2c); + + i2c->cur_trans = msg->buf; + i2c->residue = msg->len; + i2c->access_cnt = msg->len / I2C_FIFO_MAX; + i2c->msg_rd = msg->flags & I2C_M_RD; + + for (i = 0; i < i2c->access_cnt; i++) { + ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX); + if (ret) + return ret; + } + + if (i2c->residue > 0) { + ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue); + if (ret) + return ret; + } + + i2c->residue = 0; + i2c->access_cnt = 0; + + return 0; +} + +static int zx2967_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct zx2967_i2c *i2c = i2c_get_adapdata(adap); + int ret; + int i; + + if (i2c->is_suspended) + return -EBUSY; + + zx2967_set_addr(i2c, msgs->addr); + + for (i = 0; i < num; i++) { + ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]); + if (ret) + return ret; + } + + return num; +} + +static void +zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + u32 val; + + val = zx2967_i2c_readl(i2c, REG_RDCONF); + val |= I2C_RFIFO_RESET; + zx2967_i2c_writel(i2c, val, REG_RDCONF); + zx2967_set_addr(i2c, addr); + val = zx2967_i2c_readl(i2c, REG_CMD); + val &= ~I2C_RW_READ; + zx2967_i2c_writel(i2c, val, REG_CMD); + + switch (size) { + case I2C_SMBUS_BYTE: + zx2967_i2c_writel(i2c, command, REG_DATA); + break; + case I2C_SMBUS_BYTE_DATA: + zx2967_i2c_writel(i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) + zx2967_i2c_writel(i2c, data->byte, REG_DATA); + break; + case I2C_SMBUS_WORD_DATA: + zx2967_i2c_writel(i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) { + zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA); + zx2967_i2c_writel(i2c, (data->word & 0xff), + REG_DATA); + } + break; + } +} + +static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size, + union i2c_smbus_data *data) +{ + unsigned long time_left; + u8 buf[2]; + u32 val; + + reinit_completion(&i2c->complete); + + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_CMB_RW_EN; + zx2967_i2c_writel(i2c, val, REG_CMD); + + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + val = zx2967_i2c_readl(i2c, REG_DATA); + data->byte = val; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + buf[0] = zx2967_i2c_readl(i2c, REG_DATA); + buf[1] = zx2967_i2c_readl(i2c, REG_DATA); + data->word = (buf[0] << 8) | buf[1]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c) +{ + unsigned long time_left; + u32 val; + + reinit_completion(&i2c->complete); + val = zx2967_i2c_readl(i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) + return -ETIMEDOUT; + + if (i2c->error) + return i2c->error; + + return 0; +} + +static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct zx2967_i2c *i2c = i2c_get_adapdata(adap); + + if (size == I2C_SMBUS_QUICK) + read_write = I2C_SMBUS_WRITE; + + switch (size) { + case I2C_SMBUS_QUICK: + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + case I2C_SMBUS_WORD_DATA: + zx2967_smbus_xfer_prepare(i2c, addr, read_write, + command, size, data); + break; + default: + return -EOPNOTSUPP; + } + + if (read_write == I2C_SMBUS_READ) + return zx2967_smbus_xfer_read(i2c, size, data); + + return zx2967_smbus_xfer_write(i2c); +} + +static u32 zx2967_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | + I2C_FUNC_SMBUS_QUICK | + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static int __maybe_unused zx2967_i2c_suspend(struct device *dev) +{ + struct zx2967_i2c *i2c = dev_get_drvdata(dev); + + i2c->is_suspended = true; + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static int __maybe_unused zx2967_i2c_resume(struct device *dev) +{ + struct zx2967_i2c *i2c = dev_get_drvdata(dev); + + i2c->is_suspended = false; + clk_prepare_enable(i2c->clk); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops, + zx2967_i2c_suspend, zx2967_i2c_resume); + +static const struct i2c_algorithm zx2967_i2c_algo = { + .master_xfer = zx2967_i2c_xfer, + .smbus_xfer = zx2967_smbus_xfer, + .functionality = zx2967_i2c_func, +}; + +static const struct of_device_id zx2967_i2c_of_match[] = { + { .compatible = "zte,zx296718-i2c", }, + { }, +}; +MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match); + +static int zx2967_i2c_probe(struct platform_device *pdev) +{ + struct zx2967_i2c *i2c; + void __iomem *reg_base; + struct resource *res; + struct clk *clk; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "missing controller clock"); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable i2c_clk\n"); + return ret; + } + + ret = device_property_read_u32(&pdev->dev, "clock-frequency", + &i2c->clk_freq); + if (ret) { + dev_err(&pdev->dev, "missing clock-frequency"); + return ret; + } + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + i2c->irq = ret; + i2c->reg_base = reg_base; + i2c->clk = clk; + + init_completion(&i2c->complete); + platform_set_drvdata(pdev, i2c); + + ret = zx2967_i2c_reset_hardware(i2c); + if (ret) { + dev_err(&pdev->dev, "failed to initialize i2c controller\n"); + goto err_clk_unprepare; + } + + ret = devm_request_irq(&pdev->dev, i2c->irq, + zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c); + if (ret) { + dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq); + goto err_clk_unprepare; + } + + i2c_set_adapdata(&i2c->adap, i2c); + strlcpy(i2c->adap.name, "zx2967 i2c adapter", + sizeof(i2c->adap.name)); + i2c->adap.algo = &zx2967_i2c_algo; + i2c->adap.nr = pdev->id; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret) + goto err_clk_unprepare; + + return 0; + +err_clk_unprepare: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int zx2967_i2c_remove(struct platform_device *pdev) +{ + struct zx2967_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static struct platform_driver zx2967_i2c_driver = { + .probe = zx2967_i2c_probe, + .remove = zx2967_i2c_remove, + .driver = { + .name = "zx2967_i2c", + .of_match_table = zx2967_i2c_of_match, + .pm = &zx2967_i2c_dev_pm_ops, + }, +}; +module_platform_driver(zx2967_i2c_driver); + +MODULE_AUTHOR("Baoyou Xie "); +MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver"); +MODULE_LICENSE("GPL v2"); From 8064c616984eaa015f018dba595d78cd24a0cc8c Mon Sep 17 00:00:00 2001 From: Matt Weber Date: Thu, 22 Jun 2017 15:00:33 -0500 Subject: [PATCH 35/51] i2c: cadance: fix ctrl/addr reg write order The driver was clearing the hold bit in the control register before writing to the address register which resulted in a stop condition being generated rather than a repeated start. This issue was only observed when a system was running much slower than a normal processor would execute. The IP data sheet mentions a ordering of writing to the address register before clearing the hold. Fixes: df8eb5691c4 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: John Linn Signed-off-by: Paresh Chaudhary Signed-off-by: Matthew Weber Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 45d6771fac8c..75d80161931f 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -405,14 +405,14 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET); } + /* Set the slave address in address register - triggers operation */ + cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, + CDNS_I2C_ADDR_OFFSET); /* Clear the bus hold flag if bytes to receive is less than FIFO size */ if (!id->bus_hold_flag && ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) && (id->recv_count <= CDNS_I2C_FIFO_DEPTH)) cdns_i2c_clear_bus_hold(id); - /* Set the slave address in address register - triggers operation */ - cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, - CDNS_I2C_ADDR_OFFSET); cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET); } From e00ad7ef68e4882a18ac78d82348be09e8d0263b Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 26 Jun 2017 12:44:30 +1200 Subject: [PATCH 36/51] dt-bindings: add bindings for i2c-pca-platform Signed-off-by: Chris Packham Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- .../bindings/i2c/i2c-pca-platform.txt | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt new file mode 100644 index 000000000000..f1f3876bb8e8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt @@ -0,0 +1,29 @@ +* NXP PCA PCA9564/PCA9665 I2C controller + +The PCA9564/PCA9665 serves as an interface between most standard +parallel-bus microcontrollers/microprocessors and the serial I2C-bus +and allows the parallel bus system to communicate bi-directionally +with the I2C-bus. + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : one of "nxp,pca9564" or "nxp,pca9665" + +Optional properties + - interrupts : the interrupt number + - interrupt-parent : the phandle for the interrupt controller. + If an interrupt is not specified polling will be used. + - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line + is active low, it should be marked GPIO_ACTIVE_LOW. + - clock-frequency : I2C bus frequency. + +Example: + i2c0: i2c@80000 { + compatible = "nxp,pca9564"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80000 0x4>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + clock-frequency = <100000>; + }; From 4cc7229daa46d1867e66ba09929d936377ae4837 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 26 Jun 2017 12:44:31 +1200 Subject: [PATCH 37/51] i2c: pca-platform: switch to struct gpio_desc Make use of struct gpio_desc which allows us to specify the active state of the reset pin. Signed-off-by: Chris Packham Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 43 ++++++++++++--------------- 1 file changed, 19 insertions(+), 24 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 3bd2e7d06e4b..9f995b8ed587 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -29,7 +30,7 @@ struct i2c_pca_pf_data { void __iomem *reg_base; int irq; /* if 0, use polling */ - int gpio; + struct gpio_desc *gpio; wait_queue_head_t wait; struct i2c_adapter adap; struct i2c_algo_pca_data algo_data; @@ -112,9 +113,9 @@ static void i2c_pca_pf_resetchip(void *pd) { struct i2c_pca_pf_data *i2c = pd; - gpio_set_value(i2c->gpio, 0); + gpiod_set_value(i2c->gpio, 1); ndelay(100); - gpio_set_value(i2c->gpio, 1); + gpiod_set_value(i2c->gpio, 0); } static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id) @@ -181,11 +182,24 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) if (platform_data) { i2c->adap.timeout = platform_data->timeout; i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed; - i2c->gpio = platform_data->gpio; + if (gpio_is_valid(platform_data->gpio)) { + ret = devm_gpio_request_one(&pdev->dev, + platform_data->gpio, + GPIOF_ACTIVE_LOW, + i2c->adap.name); + if (ret == 0) { + i2c->gpio = gpio_to_desc(platform_data->gpio); + gpiod_direction_output(i2c->gpio, 0); + i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; + } else { + dev_warn(&pdev->dev, "Registering gpio failed!\n"); + i2c->gpio = NULL; + } + } } else { i2c->adap.timeout = HZ; i2c->algo_data.i2c_clock = 59000; - i2c->gpio = -1; + i2c->gpio = NULL; } i2c->algo_data.data = i2c; @@ -208,19 +222,6 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) break; } - /* Use gpio_is_valid() when in mainline */ - if (i2c->gpio > -1) { - ret = gpio_request(i2c->gpio, i2c->adap.name); - if (ret == 0) { - gpio_direction_output(i2c->gpio, 1); - i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; - } else { - printk(KERN_WARNING "%s: Registering gpio failed!\n", - i2c->adap.name); - i2c->gpio = ret; - } - } - if (irq) { ret = request_irq(irq, i2c_pca_pf_handler, IRQF_TRIGGER_FALLING, pdev->name, i2c); @@ -243,9 +244,6 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) if (irq) free_irq(irq, i2c); e_reqirq: - if (i2c->gpio > -1) - gpio_free(i2c->gpio); - iounmap(i2c->reg_base); e_remap: kfree(i2c); @@ -265,9 +263,6 @@ static int i2c_pca_pf_remove(struct platform_device *pdev) if (i2c->irq) free_irq(i2c->irq, i2c); - if (i2c->gpio > -1) - gpio_free(i2c->gpio); - iounmap(i2c->reg_base); release_mem_region(i2c->io_base, i2c->io_size); kfree(i2c); From 0e8ce93bdceb6d36a3c1db2227d3f51168fb796c Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 26 Jun 2017 12:44:32 +1200 Subject: [PATCH 38/51] i2c: pca-platform: add devicetree awareness Allow devices that use this driver to be registered via a devicetree. Signed-off-by: Chris Packham [wsa: fixed leakage when registering GPIO failed] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 9f995b8ed587..31d7f76ddd94 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include @@ -137,12 +139,15 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) struct resource *res; struct i2c_pca9564_pf_platform_data *platform_data = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; int ret = 0; int irq; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); /* If irq is 0, we do polling. */ + if (irq < 0) + irq = 0; if (res == NULL) { ret = -ENODEV; @@ -178,6 +183,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) (unsigned long) res->start); i2c->adap.algo_data = &i2c->algo_data; i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = np; if (platform_data) { i2c->adap.timeout = platform_data->timeout; @@ -196,6 +202,15 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) i2c->gpio = NULL; } } + } else if (np) { + i2c->adap.timeout = HZ; + i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW); + if (IS_ERR(i2c->gpio)) { + ret = PTR_ERR(i2c->gpio); + goto e_reqirq; + } + of_property_read_u32_index(np, "clock-frequency", 0, + &i2c->algo_data.i2c_clock); } else { i2c->adap.timeout = HZ; i2c->algo_data.i2c_clock = 59000; @@ -270,11 +285,21 @@ static int i2c_pca_pf_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id i2c_pca_of_match_table[] = { + { .compatible = "nxp,pca9564" }, + { .compatible = "nxp,pca9665" }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_pca_of_match_table); +#endif + static struct platform_driver i2c_pca_pf_driver = { .probe = i2c_pca_pf_probe, .remove = i2c_pca_pf_remove, .driver = { .name = "i2c-pca-platform", + .of_match_table = of_match_ptr(i2c_pca_of_match_table), }, }; From fa70ca7c287ee63b790fbb3de624a0c80a6e2be2 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 26 Jun 2017 12:44:33 +1200 Subject: [PATCH 39/51] i2c: pca-platform: use device managed allocations Switch to using the devm_ APIs and remove the now unnecessary error handling and most of the device removal code. Signed-off-by: Chris Packham [wsa: adapted error handling I added in previous patch] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 59 ++++++--------------------- 1 file changed, 12 insertions(+), 47 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 31d7f76ddd94..7db481cbf402 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -143,35 +143,23 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) int ret = 0; int irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); /* If irq is 0, we do polling. */ if (irq < 0) irq = 0; - if (res == NULL) { - ret = -ENODEV; - goto e_print; - } + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; - if (!request_mem_region(res->start, resource_size(res), res->name)) { - ret = -ENOMEM; - goto e_print; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->reg_base)) + return PTR_ERR(i2c->reg_base); - i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL); - if (!i2c) { - ret = -ENOMEM; - goto e_alloc; - } init_waitqueue_head(&i2c->wait); - i2c->reg_base = ioremap(res->start, resource_size(res)); - if (!i2c->reg_base) { - ret = -ENOMEM; - goto e_remap; - } i2c->io_base = res->start; i2c->io_size = resource_size(res); i2c->irq = irq; @@ -205,10 +193,8 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) } else if (np) { i2c->adap.timeout = HZ; i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW); - if (IS_ERR(i2c->gpio)) { - ret = PTR_ERR(i2c->gpio); - goto e_reqirq; - } + if (IS_ERR(i2c->gpio)) + return PTR_ERR(i2c->gpio); of_property_read_u32_index(np, "clock-frequency", 0, &i2c->algo_data.i2c_clock); } else { @@ -238,15 +224,14 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) } if (irq) { - ret = request_irq(irq, i2c_pca_pf_handler, + ret = devm_request_irq(&pdev->dev, irq, i2c_pca_pf_handler, IRQF_TRIGGER_FALLING, pdev->name, i2c); if (ret) - goto e_reqirq; + return ret; } if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) { - ret = -ENODEV; - goto e_adapt; + return -ENODEV; } platform_set_drvdata(pdev, i2c); @@ -254,19 +239,6 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) printk(KERN_INFO "%s registered.\n", i2c->adap.name); return 0; - -e_adapt: - if (irq) - free_irq(irq, i2c); -e_reqirq: - iounmap(i2c->reg_base); -e_remap: - kfree(i2c); -e_alloc: - release_mem_region(res->start, resource_size(res)); -e_print: - printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret); - return ret; } static int i2c_pca_pf_remove(struct platform_device *pdev) @@ -275,13 +247,6 @@ static int i2c_pca_pf_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap); - if (i2c->irq) - free_irq(i2c->irq, i2c); - - iounmap(i2c->reg_base); - release_mem_region(i2c->io_base, i2c->io_size); - kfree(i2c); - return 0; } From df40f247750cc6427216b3be2c0eebfd51a5c155 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 26 Jun 2017 12:44:34 +1200 Subject: [PATCH 40/51] i2c: pca-platform: use dev_warn/dev_info instead of printk Signed-off-by: Chris Packham Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 7db481cbf402..395eca0cbb1f 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -107,8 +107,8 @@ static int i2c_pca_pf_waitforcompletion(void *pd) static void i2c_pca_pf_dummyreset(void *pd) { struct i2c_pca_pf_data *i2c = pd; - printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n", - i2c->adap.name); + + dev_warn(&i2c->adap.dev, "No reset-pin found. Chip may get stuck!\n"); } static void i2c_pca_pf_resetchip(void *pd) @@ -236,7 +236,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); - printk(KERN_INFO "%s registered.\n", i2c->adap.name); + dev_info(&pdev->dev, "registered.\n"); return 0; } From c3518a4ed8753a88b0dee614a64ffadd5f67386b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 23 Jun 2017 21:05:30 +0200 Subject: [PATCH 41/51] i2c: zx2967: always use the same device when printing errors Let's always use the platform device for dev_* and not sometimes the adapter device as well. Also fix this checkpatch check: CHECK: Macro argument 'i2c' may be better as '(i2c)' to avoid precedence issues Signed-off-by: Wolfram Sang Acked-by: Shawn Guo Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-zx2967.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c index 3e381edc0f22..48281c1b30c6 100644 --- a/drivers/i2c/busses/i2c-zx2967.c +++ b/drivers/i2c/busses/i2c-zx2967.c @@ -53,7 +53,7 @@ #define I2C_TIMEOUT msecs_to_jiffies(1000) -#define DEV(i2c) (&i2c->adap.dev) +#define DEV(i2c) ((i2c)->adap.dev.parent) struct zx2967_i2c { struct i2c_adapter adap; From 86766a3e15ac73dcf9542eebc60d3c34578d463a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 24 Jun 2017 22:25:26 +0800 Subject: [PATCH 42/51] i2c: zx2967: drop COMPILE_TEST dependency 0-DAY kernel test reports the following build issue on IA64 architecture with allmodconfig. drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_writesb': >> drivers/i2c/busses/i2c-zx2967.c:87:2: error: implicit declaration of function 'writesb' [-Werror=implicit-function-declaration] writesb(i2c->reg_base + reg, data, len); ^~~~~~~ drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_readsb': >> drivers/i2c/busses/i2c-zx2967.c:93:2: error: implicit declaration of function 'readsb' [-Werror=implicit-function-declaration] readsb(i2c->reg_base + reg, data, len); ^~~~~~ cc1: some warnings being treated as errors It's caused by that writesb/readsb are unavailable on IA64 architecture. Let's drop COMPILE_TEST dependency to avoid the build issue. Reported-by: kbuild test robot Signed-off-by: Shawn Guo Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5134b3cde14e..c01cf3508d1c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1272,7 +1272,7 @@ config I2C_OPAL config I2C_ZX2967 tristate "ZTE ZX2967 I2C support" - depends on ARCH_ZX || COMPILE_TEST + depends on ARCH_ZX default y help Selecting this option will add ZX2967 I2C driver. From 9f3e065c54b05b03bd39dbbcc5a44f2f1807994d Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Thu, 22 Jun 2017 11:17:32 +0100 Subject: [PATCH 43/51] i2c: designware: add SLAVE mode functions - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support - Slave functions added to core library file - Slave abort sources added to common source file - New driver: i2c-designware-slave added - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module when supported by the architecture. All the SLAVE flow is added but it is not enabled via platform driver. Signed-off-by: Luis Oliveira Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula [wsa: made a function static and one-lined a message] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 14 +- drivers/i2c/busses/Makefile | 3 + drivers/i2c/busses/i2c-designware-common.c | 6 + drivers/i2c/busses/i2c-designware-core.h | 2 + drivers/i2c/busses/i2c-designware-slave.c | 394 +++++++++++++++++++++ 5 files changed, 418 insertions(+), 1 deletion(-) create mode 100644 drivers/i2c/busses/i2c-designware-slave.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c01cf3508d1c..c98c8e51c448 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -483,14 +483,26 @@ config I2C_DESIGNWARE_CORE config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" select I2C_DESIGNWARE_CORE + select I2C_DESIGNWARE_SLAVE depends on (ACPI && COMMON_CLK) || !ACPI help If you say yes to this option, support will be included for the - Synopsys DesignWare I2C adapter. Only master mode is supported. + Synopsys DesignWare I2C adapter. This driver can also be built as a module. If so, the module will be called i2c-designware-platform. +config I2C_DESIGNWARE_SLAVE + bool "Synopsys DesignWare Slave" + select I2C_SLAVE + depends on I2C_DESIGNWARE_PLATFORM + help + If you say yes to this option, support will be included for the + Synopsys DesignWare I2C slave adapter. + + This is not a standalone module, this module compiles together with + i2c-designware-core. + config I2C_DESIGNWARE_PCI tristate "Synopsys DesignWare PCI" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index a84651134048..1b2fc815a4d8 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -42,6 +42,9 @@ obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o +ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y) +i2c-designware-core-objs += i2c-designware-slave.o +endif obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index 0d0ccb73f0e6..d1a69372432f 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -56,6 +56,12 @@ static char *abort_sources[] = { "trying to use disabled adapter", [ARB_LOST] = "lost arbitration", + [ABRT_SLAVE_FLUSH_TXFIFO] = + "read command so flush old data in the TX FIFO", + [ABRT_SLAVE_ARBLOST] = + "slave lost the bus while transmitting data to a remote master", + [ABRT_SLAVE_RD_INTX] = + "incorrect slave-transmitter mode configuration", }; u32 dw_readl(struct dw_i2c_dev *dev, int offset) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 76807eafda53..64a39a983410 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -305,9 +305,11 @@ u32 i2c_dw_func(struct i2c_adapter *adap); void i2c_dw_disable(struct dw_i2c_dev *dev); void i2c_dw_disable_int(struct dw_i2c_dev *dev); int i2c_dw_init(struct dw_i2c_dev *dev); +int i2c_dw_init_slave(struct dw_i2c_dev *dev); extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); +extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev); #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c new file mode 100644 index 000000000000..4012c74e9785 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -0,0 +1,394 @@ +/* + * Synopsys DesignWare I2C adapter driver (slave only). + * + * Based on the Synopsys DesignWare I2C adapter driver (master). + * + * Copyright (C) 2016 Synopsys Inc. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ---------------------------------------------------------------------------- + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "i2c-designware-core.h" + +static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) +{ + /* Configure Tx/Rx FIFO threshold levels. */ + dw_writel(dev, 0, DW_IC_TX_TL); + dw_writel(dev, 0, DW_IC_RX_TL); + + /* Configure the I2C slave. */ + dw_writel(dev, dev->slave_cfg, DW_IC_CON); + dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK); +} + +/** + * i2c_dw_init_slave() - Initialize the designware i2c slave hardware + * @dev: device private data + * + * This function configures and enables the I2C in slave mode. + * This function is called during I2C init function, and in case of timeout at + * run time. + */ +int i2c_dw_init_slave(struct dw_i2c_dev *dev) +{ + u32 sda_falling_time, scl_falling_time; + u32 reg, comp_param1; + u32 hcnt, lcnt; + int ret; + + ret = i2c_dw_acquire_lock(dev); + if (ret) + return ret; + + reg = dw_readl(dev, DW_IC_COMP_TYPE); + if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) { + /* Configure register endianness access. */ + dev->flags |= ACCESS_SWAP; + } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) { + /* Configure register access mode 16bit. */ + dev->flags |= ACCESS_16BIT; + } else if (reg != DW_IC_COMP_TYPE_VALUE) { + dev_err(dev->dev, + "Unknown Synopsys component type: 0x%08x\n", reg); + i2c_dw_release_lock(dev); + return -ENODEV; + } + + comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1); + + /* Disable the adapter. */ + __i2c_dw_enable_and_wait(dev, false); + + /* Set standard and fast speed deviders for high/low periods. */ + sda_falling_time = dev->sda_falling_time ?: 300; /* ns */ + scl_falling_time = dev->scl_falling_time ?: 300; /* ns */ + + /* Set SCL timing parameters for standard-mode. */ + if (dev->ss_hcnt && dev->ss_lcnt) { + hcnt = dev->ss_hcnt; + lcnt = dev->ss_lcnt; + } else { + hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), + 4000, /* tHD;STA = tHIGH = 4.0 us */ + sda_falling_time, + 0, /* 0: DW default, 1: Ideal */ + 0); /* No offset */ + lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), + 4700, /* tLOW = 4.7 us */ + scl_falling_time, + 0); /* No offset */ + } + dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT); + dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); + dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); + + /* Set SCL timing parameters for fast-mode or fast-mode plus. */ + if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) { + hcnt = dev->fp_hcnt; + lcnt = dev->fp_lcnt; + } else if (dev->fs_hcnt && dev->fs_lcnt) { + hcnt = dev->fs_hcnt; + lcnt = dev->fs_lcnt; + } else { + hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), + 600, /* tHD;STA = tHIGH = 0.6 us */ + sda_falling_time, + 0, /* 0: DW default, 1: Ideal */ + 0); /* No offset */ + lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), + 1300, /* tLOW = 1.3 us */ + scl_falling_time, + 0); /* No offset */ + } + dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT); + dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); + dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); + + if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) == + DW_IC_CON_SPEED_HIGH) { + if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) + != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) { + dev_err(dev->dev, "High Speed not supported!\n"); + dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK; + dev->slave_cfg |= DW_IC_CON_SPEED_FAST; + } else if (dev->hs_hcnt && dev->hs_lcnt) { + hcnt = dev->hs_hcnt; + lcnt = dev->hs_lcnt; + dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT); + dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT); + dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n", + hcnt, lcnt); + } + } + + /* Configure SDA Hold Time if required. */ + reg = dw_readl(dev, DW_IC_COMP_VERSION); + if (reg >= DW_IC_SDA_HOLD_MIN_VERS) { + if (!dev->sda_hold_time) { + /* Keep previous hold time setting if no one set it. */ + dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD); + } + /* + * Workaround for avoiding TX arbitration lost in case I2C + * slave pulls SDA down "too quickly" after falling egde of + * SCL by enabling non-zero SDA RX hold. Specification says it + * extends incoming SDA low to high transition while SCL is + * high but it apprears to help also above issue. + */ + if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK)) + dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT; + dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); + } else { + dev_warn(dev->dev, + "Hardware too old to adjust SDA hold time.\n"); + } + + i2c_dw_configure_fifo_slave(dev); + i2c_dw_release_lock(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(i2c_dw_init_slave); + +static int i2c_dw_reg_slave(struct i2c_client *slave) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter); + + if (dev->slave) + return -EBUSY; + if (slave->flags & I2C_CLIENT_TEN) + return -EAFNOSUPPORT; + /* + * Set slave address in the IC_SAR register, + * the address to which the DW_apb_i2c responds. + */ + __i2c_dw_enable(dev, false); + dw_writel(dev, slave->addr, DW_IC_SAR); + dev->slave = slave; + + __i2c_dw_enable(dev, true); + + dev->cmd_err = 0; + dev->msg_write_idx = 0; + dev->msg_read_idx = 0; + dev->msg_err = 0; + dev->status = STATUS_IDLE; + dev->abort_source = 0; + dev->rx_outstanding = 0; + + return 0; +} + +static int i2c_dw_unreg_slave(struct i2c_client *slave) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter); + + dev->disable_int(dev); + dev->disable(dev); + dev->slave = NULL; + + return 0; +} + +static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev) +{ + u32 stat; + + /* + * The IC_INTR_STAT register just indicates "enabled" interrupts. + * Ths unmasked raw version of interrupt status bits are available + * in the IC_RAW_INTR_STAT register. + * + * That is, + * stat = dw_readl(IC_INTR_STAT); + * equals to, + * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK); + * + * The raw version might be useful for debugging purposes. + */ + stat = dw_readl(dev, DW_IC_INTR_STAT); + + /* + * Do not use the IC_CLR_INTR register to clear interrupts, or + * you'll miss some interrupts, triggered during the period from + * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR). + * + * Instead, use the separately-prepared IC_CLR_* registers. + */ + if (stat & DW_IC_INTR_TX_ABRT) + dw_readl(dev, DW_IC_CLR_TX_ABRT); + if (stat & DW_IC_INTR_RX_UNDER) + dw_readl(dev, DW_IC_CLR_RX_UNDER); + if (stat & DW_IC_INTR_RX_OVER) + dw_readl(dev, DW_IC_CLR_RX_OVER); + if (stat & DW_IC_INTR_TX_OVER) + dw_readl(dev, DW_IC_CLR_TX_OVER); + if (stat & DW_IC_INTR_RX_DONE) + dw_readl(dev, DW_IC_CLR_RX_DONE); + if (stat & DW_IC_INTR_ACTIVITY) + dw_readl(dev, DW_IC_CLR_ACTIVITY); + if (stat & DW_IC_INTR_STOP_DET) + dw_readl(dev, DW_IC_CLR_STOP_DET); + if (stat & DW_IC_INTR_START_DET) + dw_readl(dev, DW_IC_CLR_START_DET); + if (stat & DW_IC_INTR_GEN_CALL) + dw_readl(dev, DW_IC_CLR_GEN_CALL); + + return stat; +} + +/* + * Interrupt service routine. This gets called whenever an I2C slave interrupt + * occurs. + */ + +static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) +{ + u32 raw_stat, stat, enabled; + u8 val, slave_activity; + + stat = dw_readl(dev, DW_IC_INTR_STAT); + enabled = dw_readl(dev, DW_IC_ENABLE); + raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); + slave_activity = ((dw_readl(dev, DW_IC_STATUS) & + DW_IC_STATUS_SLAVE_ACTIVITY) >> 6); + + if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY)) + return 0; + + dev_dbg(dev->dev, + "%#x STAUTS SLAVE_ACTTVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n", + enabled, slave_activity, raw_stat, stat); + + if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET)) + i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val); + + if (stat & DW_IC_INTR_RD_REQ) { + if (slave_activity) { + if (stat & DW_IC_INTR_RX_FULL) { + val = dw_readl(dev, DW_IC_DATA_CMD); + + if (!i2c_slave_event(dev->slave, + I2C_SLAVE_WRITE_RECEIVED, + &val)) { + dev_vdbg(dev->dev, "Byte %X acked!", + val); + } + dw_readl(dev, DW_IC_CLR_RD_REQ); + stat = i2c_dw_read_clear_intrbits_slave(dev); + } else { + dw_readl(dev, DW_IC_CLR_RD_REQ); + dw_readl(dev, DW_IC_CLR_RX_UNDER); + stat = i2c_dw_read_clear_intrbits_slave(dev); + } + if (!i2c_slave_event(dev->slave, + I2C_SLAVE_READ_REQUESTED, + &val)) + dw_writel(dev, val, DW_IC_DATA_CMD); + } + } + + if (stat & DW_IC_INTR_RX_DONE) { + if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED, + &val)) + dw_readl(dev, DW_IC_CLR_RX_DONE); + + i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val); + stat = i2c_dw_read_clear_intrbits_slave(dev); + return 1; + } + + if (stat & DW_IC_INTR_RX_FULL) { + val = dw_readl(dev, DW_IC_DATA_CMD); + if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED, + &val)) + dev_vdbg(dev->dev, "Byte %X acked!", val); + } else { + i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val); + stat = i2c_dw_read_clear_intrbits_slave(dev); + } + + return 1; +} + +static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id) +{ + struct dw_i2c_dev *dev = dev_id; + int ret; + + i2c_dw_read_clear_intrbits_slave(dev); + ret = i2c_dw_irq_handler_slave(dev); + if (ret > 0) + complete(&dev->cmd_complete); + + return IRQ_RETVAL(ret); +} + +static struct i2c_algorithm i2c_dw_algo = { + .functionality = i2c_dw_func, + .reg_slave = i2c_dw_reg_slave, + .unreg_slave = i2c_dw_unreg_slave, +}; + +int i2c_dw_probe_slave(struct dw_i2c_dev *dev) +{ + struct i2c_adapter *adap = &dev->adapter; + int ret; + + init_completion(&dev->cmd_complete); + + dev->init = i2c_dw_init_slave; + dev->disable = i2c_dw_disable; + dev->disable_int = i2c_dw_disable_int; + + ret = dev->init(dev); + if (ret) + return ret; + + snprintf(adap->name, sizeof(adap->name), + "Synopsys DesignWare I2C Slave adapter"); + adap->retries = 3; + adap->algo = &i2c_dw_algo; + adap->dev.parent = dev->dev; + i2c_set_adapdata(adap, dev); + + ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave, + IRQF_SHARED, dev_name(dev->dev), dev); + if (ret) { + dev_err(dev->dev, "failure requesting irq %i: %d\n", + dev->irq, ret); + return ret; + } + + ret = i2c_add_numbered_adapter(adap); + if (ret) + dev_err(dev->dev, "failure adding adapter: %d\n", ret); + pm_runtime_put_noidle(dev->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_dw_probe_slave); + +MODULE_AUTHOR("Luis Oliveira "); +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter"); +MODULE_LICENSE("GPL v2"); From 5b6d721b266acaef411520e28066e4624c6619e7 Mon Sep 17 00:00:00 2001 From: Luis Oliveira Date: Thu, 22 Jun 2017 11:17:33 +0100 Subject: [PATCH 44/51] i2c: designware: enable SLAVE in platform module - Slave mode selected in platform module if the support is detected in the DT. Signed-off-by: Luis Oliveira Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.h | 2 + drivers/i2c/busses/i2c-designware-platdrv.c | 41 ++++++++++++++++++--- 2 files changed, 38 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 64a39a983410..7bfbcc62f6c5 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -228,6 +228,7 @@ * @disable: function to disable the controller * @disable_int: function to disable all interrupts * @init: function to initialize the I2C hardware + * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -282,6 +283,7 @@ struct dw_i2c_dev { void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); + int mode; }; #define ACCESS_SWAP 0x00000001 diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 1f38c807be5f..2ea6d0d25a01 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -1,5 +1,5 @@ /* - * Synopsys DesignWare I2C adapter driver (master only). + * Synopsys DesignWare I2C adapter driver. * * Based on the TI DAVINCI I2C adapter driver. * @@ -174,9 +174,13 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) static void i2c_dw_configure_master(struct dw_i2c_dev *dev) { + dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | DW_IC_CON_RESTART_EN; + dev->mode = DW_IC_MASTER; + switch (dev->clk_freq) { case 100000: dev->master_cfg |= DW_IC_CON_SPEED_STD; @@ -189,6 +193,28 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev) } } +static void i2c_dw_configure_slave(struct dw_i2c_dev *dev) +{ + dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY; + + dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL | + DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED | + DW_IC_CON_SPEED_FAST; + + dev->mode = DW_IC_SLAVE; + + switch (dev->clk_freq) { + case 100000: + dev->slave_cfg |= DW_IC_CON_SPEED_STD; + break; + case 3400000: + dev->slave_cfg |= DW_IC_CON_SPEED_HIGH; + break; + default: + dev->slave_cfg |= DW_IC_CON_SPEED_FAST; + } +} + static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) { if (IS_ERR(i_dev->clk)) @@ -302,9 +328,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (ret) goto exit_reset; - dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; - - i2c_dw_configure_master(dev); + if (i2c_detect_slave_mode(&pdev->dev)) + i2c_dw_configure_slave(dev); + else + i2c_dw_configure_master(dev); dev->clk = devm_clk_get(&pdev->dev, NULL); if (!i2c_dw_plat_prepare_clk(dev, true)) { @@ -333,7 +360,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); } - ret = i2c_dw_probe(dev); + if (dev->mode == DW_IC_SLAVE) + ret = i2c_dw_probe_slave(dev); + else + ret = i2c_dw_probe(dev); + if (ret) goto exit_probe; From 3a4991a9864cb6b98bb9c7cf47854ffe2a79805a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 4 Jul 2017 15:04:48 +0200 Subject: [PATCH 45/51] i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices ACPI video devices get tagged by the kernel with the custom LNXVIDEO HID so that normal pnp-id matching can be used and are handled by the acpi-video driver. Sometimes the ACPI nodes describing these contain a SERIAL_TYPE_I2C ACPI resource. Before this commit the presence of this resource would cause the i2c-core to create a /sys/bus/i2c/devices/i2c-LNXVIDEO:00 device for this with a modalias of: "i2c:LNXVIDEO:00". There is no i2c driver for this custom HID, the acpi-video driver binds directly to the ACPI device /sys/bus/acpi/devices/LNXVIDEO\:00 which has a modalias of "acpi:LNXVIDEO:" . Not only is the creation of an i2c-client for this undesirable, it is actually causing problems. This weird pseudo-resource claims an i2c speed of 100KHz and typically points to the i2c bus which is used by the touchscreen controller. Some touchscreen controllers only work properly at 400KHz, at 100KHz they cause errors like these: i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration i2c_designware 80860F41:03: i2c_dw_handle_tx_abort: lost arbitration silead_ts i2c-MSSL1680:00: Registers clear error -11 This commit makes the i2c-core ignore LNXVIDEO compatible ACPI devices which has 2 positive results: 1) The bogus i2c-client for these is no longer created. 2) i2c_acpi_lookup_speed now ignores the 100KHz speed from the pseudo i2c-resouce and properly returns 400KHz as speed for the touchscreen i2c bus, fixing the touchscreen not working on various devies. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-acpi.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index 052005579ed6..4842ec3a5451 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -76,6 +76,15 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data) return 1; } +static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = { + /* + * ACPI video acpi_devices, which are handled by the acpi-video driver + * sometimes contain a SERIAL_TYPE_I2C ACPI resource, ignore these. + */ + { ACPI_VIDEO_HID, 0 }, + {} +}; + static int i2c_acpi_do_lookup(struct acpi_device *adev, struct i2c_acpi_lookup *lookup) { @@ -87,6 +96,9 @@ static int i2c_acpi_do_lookup(struct acpi_device *adev, acpi_device_enumerated(adev)) return -EINVAL; + if (acpi_match_device_ids(adev, i2c_acpi_ignored_device_ids) == 0) + return -ENODEV; + memset(info, 0, sizeof(*info)); lookup->device_handle = acpi_device_handle(adev); From 2ec4d8831b9644a080302ce10868afff8d135fc3 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 30 Jun 2017 12:54:04 +1200 Subject: [PATCH 46/51] i2c: pca-platform: correctly set algo_data.reset_chip When device tree support was added the setting of algo_data.reset_chip was moved. There were two problems with this. The first being that i2c_pca_pf_resetchip was only used if platform data was provided. The second that it was unconditionally overridden with i2c_pca_pf_dummyreset. Ensure that however the reset gpio is defined the correct reset_chip function is used. Fixes: commit 4cc7229daa46 ("i2c: pca-platform: switch to struct gpio_desc") Signed-off-by: Chris Packham Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 395eca0cbb1f..daccef6865e8 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -184,7 +184,6 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) if (ret == 0) { i2c->gpio = gpio_to_desc(platform_data->gpio); gpiod_direction_output(i2c->gpio, 0); - i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; } else { dev_warn(&pdev->dev, "Registering gpio failed!\n"); i2c->gpio = NULL; @@ -205,7 +204,10 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) i2c->algo_data.data = i2c; i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion; - i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; + if (i2c->gpio) + i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; + else + i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { case IORESOURCE_MEM_32BIT: From 78e6c5abeb4ad895867fc0ff7f61c858d4deb7c0 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 30 Jun 2017 12:54:05 +1200 Subject: [PATCH 47/51] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails, propagate the error to aid debugging. Suggested-by: Andy Shevchenko Signed-off-by: Chris Packham Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pca-platform.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index daccef6865e8..853a2abedb05 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -232,9 +232,9 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) return ret; } - if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) { - return -ENODEV; - } + ret = i2c_pca_add_numbered_bus(&i2c->adap); + if (ret) + return ret; platform_set_drvdata(pdev, i2c); From 9809cb831c9645d61ee9501c308045bb3d8afd31 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 29 Jun 2017 09:22:15 +0100 Subject: [PATCH 48/51] i2c: designware: fix spelling mistakes Trivial fixes to spelling mistakes in dev_dbg message "STAUTS" -> "STATUS" "SLAVE_ACTTVITY" -> "SLAVE_ACTIVITY" Signed-off-by: Colin Ian King Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-slave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 4012c74e9785..100643f47244 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -277,7 +277,7 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) return 0; dev_dbg(dev->dev, - "%#x STAUTS SLAVE_ACTTVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n", + "%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n", enabled, slave_activity, raw_stat, stat); if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET)) From 21bf440ce18e49b24601c3d1d25f691ef0334c4b Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Jun 2017 17:23:28 +0300 Subject: [PATCH 49/51] i2c: designware: Make HW init functions static Recent i2c-designware slave support patches use master or slave HW init functions through the function pointer so we can declare them static. While at it, rename i2c_dw_init() as i2c_dw_init_master(). Signed-off-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Tested-by: Luis Oliveira Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.h | 2 -- drivers/i2c/busses/i2c-designware-master.c | 7 +++---- drivers/i2c/busses/i2c-designware-slave.c | 3 +-- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 7bfbcc62f6c5..a403dcdfca4b 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -306,8 +306,6 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); void i2c_dw_disable(struct dw_i2c_dev *dev); void i2c_dw_disable_int(struct dw_i2c_dev *dev); -int i2c_dw_init(struct dw_i2c_dev *dev); -int i2c_dw_init_slave(struct dw_i2c_dev *dev); extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index eefc4db1ee3e..418c233075d3 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -51,7 +51,7 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) * This function is called during I2C init function, and in case of timeout at * run time. */ -int i2c_dw_init(struct dw_i2c_dev *dev) +static int i2c_dw_init_master(struct dw_i2c_dev *dev) { u32 hcnt, lcnt; u32 reg, comp_param1; @@ -171,7 +171,6 @@ int i2c_dw_init(struct dw_i2c_dev *dev) return 0; } -EXPORT_SYMBOL_GPL(i2c_dw_init); static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) { @@ -444,7 +443,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) { dev_err(dev->dev, "controller timed out\n"); /* i2c_dw_init implicitly disables the adapter */ - i2c_dw_init(dev); + i2c_dw_init_master(dev); ret = -ETIMEDOUT; goto done; } @@ -622,7 +621,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) init_completion(&dev->cmd_complete); - dev->init = i2c_dw_init; + dev->init = i2c_dw_init_master; dev->disable = i2c_dw_disable; dev->disable_int = i2c_dw_disable_int; diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 100643f47244..0548c7ea578c 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -49,7 +49,7 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) * This function is called during I2C init function, and in case of timeout at * run time. */ -int i2c_dw_init_slave(struct dw_i2c_dev *dev) +static int i2c_dw_init_slave(struct dw_i2c_dev *dev) { u32 sda_falling_time, scl_falling_time; u32 reg, comp_param1; @@ -168,7 +168,6 @@ int i2c_dw_init_slave(struct dw_i2c_dev *dev) return 0; } -EXPORT_SYMBOL_GPL(i2c_dw_init_slave); static int i2c_dw_reg_slave(struct i2c_client *slave) { From 6e38cf3b442120a84e69faf1ac9a7b4cd79d1ad6 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Jun 2017 17:23:29 +0300 Subject: [PATCH 50/51] i2c: designware: Let slave adapter support be optional Only certain system configurations may use the I2C slave mode so let the support be optional. This allow reducing module size if needed: text data bss dec hex filename 10328 1336 16 11680 2da0 drivers/i2c/busses/i2c-designware-core.ko 7222 1136 8 8366 20ae drivers/i2c/busses/i2c-designware-core.ko Signed-off-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Tested-by: Luis Oliveira Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 1 - drivers/i2c/busses/i2c-designware-core.h | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c98c8e51c448..1006b230b236 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -483,7 +483,6 @@ config I2C_DESIGNWARE_CORE config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" select I2C_DESIGNWARE_CORE - select I2C_DESIGNWARE_SLAVE depends on (ACPI && COMMON_CLK) || !ACPI help If you say yes to this option, support will be included for the diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index a403dcdfca4b..9fee4c054d3d 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -309,7 +309,11 @@ void i2c_dw_disable_int(struct dw_i2c_dev *dev); extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE) extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev); +#else +static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } +#endif #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev); From 8f1a357d41a22009150cf404b5aa5876efdb59b1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 6 Jul 2017 20:26:17 +0300 Subject: [PATCH 51/51] i2c: Provide a stub for i2c_detect_slave_mode() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drivers would like to call i2c_detect_slave_mode() even if !I2C_SLAVE. Give them what they want to, Otherwise kernel will not compile: drivers/i2c/busses/i2c-designware-platdrv.c: In function ‘dw_i2c_plat_probe’: drivers/i2c/busses/i2c-designware-platdrv.c:331:6: error: implicit declaration of function ‘i2c_detect_slave_mode’ [-Werror=implicit-function-declaration] if (i2c_detect_slave_mode(&pdev->dev)) ^~~~~~~~~~~~~~~~~~~~~ cc1: some warnings being treated as errors Fixes: 6e38cf3b4421 ("i2c: designware: Let slave adapter support be optional") Reported-by: Abdul Haleem Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 72d0ece70ed3..00ca5b86a753 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -295,6 +295,8 @@ static inline int i2c_slave_event(struct i2c_client *client, { return client->slave_cb(client, event, val); } +#else +static inline bool i2c_detect_slave_mode(struct device *dev) { return false; } #endif /**