- Add more thermal zone device encapsulation: prevent setting

structure field directly, access the sensor device instead the
   thermal zone's device for trace, relocate the traces in
   drivers/thermal (Daniel Lezcano)
 
 - Use the generic trip point for the i.MX and remove the get_trip_temp
   ops (Daniel Lezcano)
 
 - Use the devm_platform_ioremap_resource() in the Hisilicon driver
   (Yang Li)
 
 - Remove R-Car H3 ES1.* handling as public has only access to the ES2
   version and the upstream support for the ES1 has been shutdown (Wolfram Sang)
 
 - Add a delay after initializing the bank in order to let the time to
   the hardware to initialze itself before reading the temperature
   (Amjad Ouled-Ameur)
 
 - Add MT8365 support (Amjad Ouled-Ameur)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmQof0cACgkQqDIjiipP
 6E/tXQgArKKlM52mo3pg880JsiWOWGrS7pJN0x9MR0nqUm83sLTDf21fPoYmn+EJ
 wrzClIX1iHCDVCWCVxao7OIT1mxez9L2NAHseXDSDQJcZ0fflTE8wZ8xeLr6q5GN
 /ifHfCqiC98yejPcKIf2TqdGgqpCzyQ++sZoc3H6/jwysSkFlBc+YgKx+XasQR6k
 5swQ3E81zx0ouB+t1GDieXB6YRsjZzR2KQbbExoHexPue1DTIuuumz8M1Fgz4a4b
 gXRHbrGp3vmLORIAOZiVDyjzC7jwy7oN552g16yZLGDUdLaJ03gRRx7fvNzDUEMW
 mBzxak4WnNWEatCh691X6W5MdPO/uQ==
 =naJV
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal control material for 6.4-rc1 from Daniel Lezcano:

"- Add more thermal zone device encapsulation: prevent setting
   structure field directly, access the sensor device instead the
   thermal zone's device for trace, relocate the traces in
   drivers/thermal (Daniel Lezcano)

 - Use the generic trip point for the i.MX and remove the get_trip_temp
   ops (Daniel Lezcano)

 - Use the devm_platform_ioremap_resource() in the Hisilicon driver
   (Yang Li)

 - Remove R-Car H3 ES1.* handling as public has only access to the ES2
   version and the upstream support for the ES1 has been shutdown (Wolfram
   Sang)

 - Add a delay after initializing the bank in order to let the time to
   the hardware to initialze itself before reading the temperature
   (Amjad Ouled-Ameur)

 - Add MT8365 support (Amjad Ouled-Ameur)"

* tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/ti: Use fixed update interval
  thermal/drivers/stm: Don't set no_hwmon to false
  thermal/drivers/db8500: Use driver dev instead of tz->device
  thermal/core: Relocate the traces definition in thermal directory
  thermal/drivers/hisi: Use devm_platform_ioremap_resource()
  thermal/drivers/imx: Use the thermal framework for the trip point
  thermal/drivers/imx: Remove get_trip_temp ops
  thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling
  thermal/drivers/mediatek: Add delay after thermal banks initialization
  thermal/drivers/mediatek: Add support for MT8365 SoC
  thermal/drivers/mediatek: Control buffer enablement tweaks
  dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

@@ -16,6 +16,7 @@ Required properties:
   - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
   - "mediatek,mt7986-thermal" : For MT7986 SoC
   - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
+  - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
   - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
 - reg: Address range of the thermal controller
 - interrupts: IRQ for the thermal controller

drivers/thermal/Makefile

@@ -2,7 +2,7 @@
 #
 # Makefile for sensor chip drivers.
 #
-
+CFLAGS_thermal_core.o		:= -I$(src)
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 thermal_sys-y			+= thermal_core.o thermal_sysfs.o
 thermal_sys-y			+= thermal_trip.o thermal_helpers.o
@@ -16,6 +16,7 @@ thermal_sys-$(CONFIG_THERMAL_OF)		+= thermal_of.o
 thermal_sys-$(CONFIG_THERMAL_ACPI)		+= thermal_acpi.o
 
 # governors
+CFLAGS_gov_power_allocator.o			:= -I$(src)
 thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE)	+= gov_fair_share.o
 thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG)	+= gov_bang_bang.o
 thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE)	+= gov_step_wise.o

drivers/thermal/cpufreq_cooling.c

@@ -23,7 +23,7 @@
 #include <linux/thermal.h>
 #include <linux/units.h>
 
-#include <trace/events/thermal.h>
+#include "thermal_trace.h"
 
 /*
  * Cooling state <-> CPUFreq frequency

drivers/thermal/db8500_thermal.c

@@ -53,6 +53,7 @@ static const unsigned long db8500_thermal_points[] = {
 
 struct db8500_thermal_zone {
 	struct thermal_zone_device *tz;
+	struct device *dev;
 	unsigned long interpolated_temp;
 	unsigned int cur_index;
 };
@@ -114,7 +115,7 @@ static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data)
 	idx -= 1;
 
 	db8500_thermal_update_config(th, idx, next_low, next_high);
-	dev_dbg(&th->tz->device,
+	dev_dbg(th->dev,
 		"PRCMU set max %ld, min %ld\n", next_high, next_low);
 
 	thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED);
@@ -136,7 +137,7 @@ static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data)
 
 		db8500_thermal_update_config(th, idx, next_low, next_high);
 
-		dev_dbg(&th->tz->device,
+		dev_dbg(th->dev,
 			"PRCMU set max %ld, min %ld\n", next_high, next_low);
 	} else if (idx == num_points - 1)
 		/* So we roof out 1 degree over the max point */
@@ -157,6 +158,8 @@ static int db8500_thermal_probe(struct platform_device *pdev)
 	if (!th)
 		return -ENOMEM;
 
+	th->dev = dev;
+
 	low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
 	if (low_irq < 0)
 		return low_irq;

drivers/thermal/devfreq_cooling.c

@@ -20,7 +20,7 @@
 #include <linux/thermal.h>
 #include <linux/units.h>
 
-#include <trace/events/thermal.h>
+#include "thermal_trace.h"
 
 #define SCALE_ERROR_MITIGATION	100
 

drivers/thermal/gov_fair_share.c

@@ -11,7 +11,7 @@
  */
 
 #include <linux/thermal.h>
-#include <trace/events/thermal.h>
+#include "thermal_trace.h"
 
 #include "thermal_core.h"
 

drivers/thermal/gov_power_allocator.c

@@ -12,7 +12,7 @@
 #include <linux/thermal.h>
 
 #define CREATE_TRACE_POINTS
-#include <trace/events/thermal_power_allocator.h>
+#include "thermal_trace_ipa.h"
 
 #include "thermal_core.h"
 

drivers/thermal/gov_step_wise.c

@@ -12,7 +12,7 @@
 
 #include <linux/thermal.h>
 #include <linux/minmax.h>
-#include <trace/events/thermal.h>
+#include "thermal_trace.h"
 
 #include "thermal_core.h"
 

drivers/thermal/hisi_thermal.c

@@ -544,7 +544,6 @@ static int hisi_thermal_probe(struct platform_device *pdev)
 {
 	struct hisi_thermal_data *data;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	int i, ret;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -555,8 +554,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, data);
 	data->ops = of_device_get_match_data(dev);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->regs = devm_ioremap_resource(dev, res);
+	data->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(data->regs))
 		return PTR_ERR(data->regs);
 

drivers/thermal/imx_thermal.c

@@ -330,33 +330,29 @@ static int imx_change_mode(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
-{
-	*temp = trips[IMX_TRIP_CRITICAL].temperature;
-
-	return 0;
-}
-
-static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
+static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip_id,
 			     int temp)
 {
 	struct imx_thermal_data *data = thermal_zone_device_priv(tz);
+	struct thermal_trip trip;
 	int ret;
 
 	ret = pm_runtime_resume_and_get(data->dev);
 	if (ret < 0)
 		return ret;
 
+	ret = __thermal_zone_get_trip(tz, trip_id, &trip);
+	if (ret)
+		return ret;
+
 	/* do not allow changing critical threshold */
-	if (trip == IMX_TRIP_CRITICAL)
+	if (trip.type == THERMAL_TRIP_CRITICAL)
 		return -EPERM;
 
 	/* do not allow passive to be set higher than critical */
 	if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
 		return -EINVAL;
 
-	trips[IMX_TRIP_PASSIVE].temperature = temp;
-
 	imx_set_alarm_temp(data, temp);
 
 	pm_runtime_put(data->dev);
@@ -384,7 +380,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
 	.change_mode = imx_change_mode,
-	.get_crit_temp = imx_get_crit_temp,
 	.set_trip_temp = imx_set_trip_temp,
 };
 

drivers/thermal/mediatek/auxadc_thermal.c

@@ -31,6 +31,7 @@
 #define AUXADC_CON2_V		0x010
 #define AUXADC_DATA(channel)	(0x14 + (channel) * 4)
 
+#define APMIXED_SYS_TS_CON0	0x600
 #define APMIXED_SYS_TS_CON1	0x604
 
 /* Thermal Controller Registers */
@@ -281,6 +282,17 @@ enum mtk_thermal_version {
 /* The calibration coefficient of sensor  */
 #define MT7986_CALIBRATION		165
 
+/* MT8365 */
+#define MT8365_TEMP_AUXADC_CHANNEL 11
+#define MT8365_CALIBRATION 164
+#define MT8365_NUM_CONTROLLER 1
+#define MT8365_NUM_BANKS 1
+#define MT8365_NUM_SENSORS 3
+#define MT8365_NUM_SENSORS_PER_ZONE 3
+#define MT8365_TS1 0
+#define MT8365_TS2 1
+#define MT8365_TS3 2
+
 struct mtk_thermal;
 
 struct thermal_bank_cfg {
@@ -307,6 +319,9 @@ struct mtk_thermal_data {
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
 	enum mtk_thermal_version version;
+	u32 apmixed_buffer_ctl_reg;
+	u32 apmixed_buffer_ctl_mask;
+	u32 apmixed_buffer_ctl_set;
 };
 
 struct mtk_thermal {
@@ -432,6 +447,24 @@ static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
 static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
 static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
 
+/* MT8365 thermal sensor data */
+static const int mt8365_bank_data[MT8365_NUM_SENSORS] = {
+	MT8365_TS1, MT8365_TS2, MT8365_TS3
+};
+
+static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 };
+static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 };
+
+static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 };
+
 /*
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -506,6 +539,40 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.version = MTK_THERMAL_V1,
 };
 
+/*
+ * The MT8365 thermal controller has one bank, which can read up to
+ * four temperature sensors simultaneously. The MT8365 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt8365_thermal_data = {
+	.auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT8365_NUM_BANKS,
+	.num_sensors = MT8365_NUM_SENSORS,
+	.vts_index = mt8365_vts_index,
+	.cali_val = MT8365_CALIBRATION,
+	.num_controller = MT8365_NUM_CONTROLLER,
+	.controller_offset = mt8365_tc_offset,
+	.need_switch_bank = false,
+	.bank_data = {
+		{
+			.num_sensors = MT8365_NUM_SENSORS,
+			.sensors = mt8365_bank_data
+		},
+	},
+	.msr = mt8365_msr,
+	.adcpnp = mt8365_adcpnp,
+	.sensor_mux_values = mt8365_mux_values,
+	.version = MTK_THERMAL_V1,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0,
+	.apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28),
+	.apmixed_buffer_ctl_set = 0,
+};
+
 /*
  * The MT2712 thermal controller has one bank, which can read up to
  * four temperature sensors simultaneously. The MT2712 has a total of 4
@@ -560,6 +627,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
 	.version = MTK_THERMAL_V2,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
+	.apmixed_buffer_ctl_set = BIT(0),
 };
 
 /*
@@ -746,14 +816,6 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 			mt, conf->bank_data[bank->id].sensors[i], raw);
 
 
-		/*
-		 * The first read of a sensor often contains very high bogus
-		 * temperature value. Filter these out so that the system does
-		 * not immediately shut down.
-		 */
-		if (temp > 200000)
-			temp = 0;
-
 		if (temp > max)
 			max = temp;
 	}
@@ -1074,19 +1136,27 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 	{
 		.compatible = "mediatek,mt8183-thermal",
 		.data = (void *)&mt8183_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt8365-thermal",
+		.data = (void *)&mt8365_thermal_data,
 	}, {
 	},
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+				       void __iomem *apmixed_base)
 {
-	int tmp;
+	u32 tmp;
 
-	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-	tmp &= ~(0x37);
-	tmp |= 0x1;
-	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	if (!mt->conf->apmixed_buffer_ctl_reg)
+		return;
+
+	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+	tmp &= mt->conf->apmixed_buffer_ctl_mask;
+	tmp |= mt->conf->apmixed_buffer_ctl_set;
+	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
 	udelay(200);
 }
 
@@ -1184,10 +1254,10 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
-	if (mt->conf->version != MTK_THERMAL_V1) {
-		mtk_thermal_turn_on_buffer(apmixed_base);
+	mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
+	if (mt->conf->version != MTK_THERMAL_V2)
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
-	}
 
 	if (mt->conf->version == MTK_THERMAL_V1)
 		mt->raw_to_mcelsius = raw_to_mcelsius_v1;
@@ -1203,6 +1273,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mt);
 
+	/* Delay for thermal banks to be ready */
+	msleep(30);
+
 	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
 					      &mtk_thermal_ops);
 	if (IS_ERR(tzdev)) {

drivers/thermal/rcar_gen3_thermal.c

@@ -14,7 +14,6 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/sys_soc.h>
 #include <linux/thermal.h>
 
 #include "thermal_hwmon.h"
@@ -27,7 +26,6 @@
 #define REG_GEN3_IRQTEMP1	0x14
 #define REG_GEN3_IRQTEMP2	0x18
 #define REG_GEN3_IRQTEMP3	0x1C
-#define REG_GEN3_CTSR		0x20
 #define REG_GEN3_THCTR		0x20
 #define REG_GEN3_TEMP		0x28
 #define REG_GEN3_THCODE1	0x50
@@ -46,14 +44,6 @@
 #define IRQ_TEMPD2		BIT(4)
 #define IRQ_TEMPD3		BIT(5)
 
-/* CTSR bits */
-#define CTSR_PONM	BIT(8)
-#define CTSR_AOUT	BIT(7)
-#define CTSR_THBGR	BIT(5)
-#define CTSR_VMEN	BIT(4)
-#define CTSR_VMST	BIT(1)
-#define CTSR_THSST	BIT(0)
-
 /* THCTR bits */
 #define THCTR_PONM	BIT(6)
 #define THCTR_THSST	BIT(0)
@@ -88,8 +78,6 @@ struct rcar_gen3_thermal_priv {
 	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
 	struct thermal_zone_device_ops ops;
 	unsigned int num_tscs;
-	void (*thermal_init)(struct rcar_gen3_thermal_priv *priv,
-			     struct rcar_gen3_thermal_tsc *tsc);
 	int ptat[3];
 };
 
@@ -248,11 +236,6 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static const struct soc_device_attribute r8a7795es1[] = {
-	{ .soc_id = "r8a7795", .revision = "ES1.*" },
-	{ /* sentinel */ }
-};
-
 static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 {
 	unsigned int i;
@@ -311,34 +294,6 @@ static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 	return true;
 }
 
-static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_priv *priv,
-					      struct rcar_gen3_thermal_tsc *tsc)
-{
-	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  CTSR_THBGR);
-	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  0x0);
-
-	usleep_range(1000, 2000);
-
-	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM);
-
-	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
-	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
-	if (priv->ops.set_trips)
-		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
-					IRQ_TEMPD1 | IRQ_TEMP2);
-
-	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
-				CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN);
-
-	usleep_range(100, 200);
-
-	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
-				CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN |
-				CTSR_VMST | CTSR_THSST);
-
-	usleep_range(1000, 2000);
-}
-
 static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv,
 				   struct rcar_gen3_thermal_tsc *tsc)
 {
@@ -474,9 +429,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->ops = rcar_gen3_tz_of_ops;
-	priv->thermal_init = rcar_gen3_thermal_init;
-	if (soc_device_match(r8a7795es1))
-		priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
 
 	platform_set_drvdata(pdev, priv);
 
@@ -516,7 +468,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
-		priv->thermal_init(priv, tsc);
+		rcar_gen3_thermal_init(priv, tsc);
 		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
 
 		zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
@@ -563,7 +515,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
-		priv->thermal_init(priv, tsc);
+		rcar_gen3_thermal_init(priv, tsc);
 	}
 
 	return 0;

drivers/thermal/st/stm_thermal.c

@@ -558,7 +558,6 @@ static int stm_thermal_probe(struct platform_device *pdev)
 	 * Thermal_zone doesn't enable hwmon as default,
 	 * enable it here
 	 */
-	sensor->th_dev->tzp->no_hwmon = false;
 	ret = thermal_add_hwmon_sysfs(sensor->th_dev);
 	if (ret)
 		goto err_tz;

drivers/thermal/thermal_core.c

@@ -22,7 +22,7 @@
 #include <linux/suspend.h>
 
 #define CREATE_TRACE_POINTS
-#include <trace/events/thermal.h>
+#include "thermal_trace.h"
 
 #include "thermal_core.h"
 #include "thermal_hwmon.h"

drivers/thermal/thermal_helpers.c

@@ -19,9 +19,8 @@
 #include <linux/string.h>
 #include <linux/sysfs.h>
 
-#include <trace/events/thermal.h>
-
 #include "thermal_core.h"
+#include "thermal_trace.h"
 
 int get_tz_trend(struct thermal_zone_device *tz, int trip)
 {

drivers/thermal/thermal_trace.h

@@ -195,5 +195,11 @@ TRACE_EVENT(thermal_power_devfreq_limit,
 #endif /* CONFIG_DEVFREQ_THERMAL */
 #endif /* _TRACE_THERMAL_H */
 
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE thermal_trace
+
 /* This part must be outside protection */
 #include <trace/define_trace.h>

drivers/thermal/thermal_trace_ipa.h

@@ -84,5 +84,11 @@ TRACE_EVENT(thermal_power_allocator_pid,
 );
 #endif /* _TRACE_THERMAL_POWER_ALLOCATOR_H */
 
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE thermal_trace_ipa
+
 /* This part must be outside protection */
 #include <trace/define_trace.h>

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -23,6 +23,8 @@
 #include "ti-bandgap.h"
 #include "../thermal_hwmon.h"
 
+#define TI_BANDGAP_UPDATE_INTERVAL_MS 250
+
 /* common data structures */
 struct ti_thermal_data {
 	struct cpufreq_policy *policy;
@@ -159,7 +161,6 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 			     char *domain)
 {
 	struct ti_thermal_data *data;
-	int interval;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
@@ -177,10 +178,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 		return PTR_ERR(data->ti_thermal);
 	}
 
-	interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
-
 	ti_bandgap_set_sensor_data(bgp, id, data);
-	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
+	ti_bandgap_write_update_interval(bgp, data->sensor_id,
+					 TI_BANDGAP_UPDATE_INTERVAL_MS);
 
 	if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
 		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");