spi: fix typo in the comment

Correctly spelled comments make it easier for the reader to understand
the code.

Replace 'progrom' with 'program' in the comment &
replace 'Recevie' with 'Receive' in the comment &
replace 'receieved' with 'received' in the comment &
replace 'ajacent' with 'adjacent' in the comment &
replace 'trasaction' with 'transaction' in the comment &
replace 'pecularity' with 'peculiarity' in the comment &
replace 'resiter' with 'register' in the comment &
replace 'tansmition' with 'transmission' in the comment &
replace 'Deufult' with 'Default' in the comment &
replace 'tansfer' with 'transfer' in the comment &
replace 'settign' with 'setting' in the comment.

Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240914095213.298256-1-yanzhen@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-hisi-sfc-v3xx.c

@@ -40,7 +40,7 @@
 /* Common definition of interrupt bit masks */
 #define HISI_SFC_V3XX_INT_MASK_ALL (0x1ff)	/* all the masks */
 #define HISI_SFC_V3XX_INT_MASK_CPLT BIT(0)	/* command execution complete */
-#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2)	/* page progrom error */
+#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2)	/* page program error */
 #define HISI_SFC_V3XX_INT_MASK_IACCES BIT(5)	/* error visiting inaccessible/
 						 * protected address
 						 */

drivers/spi/spi-lantiq-ssc.c

@@ -139,7 +139,7 @@
 #define LTQ_SPI_FGPO_CLROUTN_S	0
 
 #define LTQ_SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
-#define LTQ_SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
+#define LTQ_SPI_RXCNT_TODO_M	0xFFFF	/* Receive to-do value */
 
 #define LTQ_SPI_IRNEN_TFI	BIT(4)	/* TX finished interrupt */
 #define LTQ_SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */

drivers/spi/spi-mpc52xx-psc.c

@@ -107,7 +107,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
 	struct mpc52xx_psc_spi *mps = spi_controller_get_devdata(spi->controller);
 	struct mpc52xx_psc __iomem *psc = mps->psc;
 	struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
-	unsigned rb = 0;	/* number of bytes receieved */
+	unsigned rb = 0;	/* number of bytes received */
 	unsigned sb = 0;	/* number of bytes sent */
 	unsigned char *rx_buf = (unsigned char *)t->rx_buf;
 	unsigned char *tx_buf = (unsigned char *)t->tx_buf;
@@ -325,7 +325,7 @@ static int mpc52xx_psc_spi_of_probe(struct platform_device *pdev)
 	if (IS_ERR(mps->psc))
 		return dev_err_probe(dev, PTR_ERR(mps->psc), "could not ioremap I/O port range\n");
 
-	/* On the 5200, fifo regs are immediately ajacent to the psc regs */
+	/* On the 5200, fifo regs are immediately adjacent to the psc regs */
 	mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc);
 
 	mps->irq = platform_get_irq(pdev, 0);

drivers/spi/spi-pic32-sqi.c

@@ -226,7 +226,7 @@ static irqreturn_t pic32_sqi_isr(int irq, void *dev_id)
 	if (status & PESQI_PKTCOMP) {
 		/* mask all interrupts */
 		enable = 0;
-		/* complete trasaction */
+		/* complete transaction */
 		complete(&sqi->xfer_done);
 	}
 

drivers/spi/spi-pl022.c

@@ -899,7 +899,7 @@ static int configure_dma(struct pl022 *pl022)
 		break;
 	}
 
-	/* SPI pecularity: we need to read and write the same width */
+	/* SPI peculiarity: we need to read and write the same width */
 	if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
 		rx_conf.src_addr_width = tx_conf.dst_addr_width;
 	if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)

drivers/spi/spi-rockchip-sfc.c

@@ -111,7 +111,7 @@
 #define  SFC_VER_4			0x4
 #define  SFC_VER_5			0x5
 
-/* Delay line controller resiter */
+/* Delay line controller register */
 #define SFC_DLL_CTRL0			0x3C
 #define SFC_DLL_CTRL0_SCLK_SMP_DLL	BIT(15)
 #define SFC_DLL_CTRL0_DLL_MAX_VER4	0xFFU

drivers/spi/spi-rockchip.c

@@ -192,7 +192,7 @@ struct rockchip_spi {
 	u8 rsd;
 
 	bool target_abort;
-	bool cs_inactive; /* spi target tansmition stop when cs inactive */
+	bool cs_inactive; /* spi target transmission stop when cs inactive */
 	bool cs_high_supported; /* native CS supports active-high polarity */
 
 	struct spi_transfer *xfer; /* Store xfer temporarily */

drivers/spi/spi-s3c64xx.c

@@ -1353,7 +1353,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	/* Setup Deufult Mode */
+	/* Setup Default Mode */
 	s3c64xx_spi_hwinit(sdd);
 
 	spin_lock_init(&sdd->lock);

drivers/spi/spi-sprd.c

@@ -728,7 +728,7 @@ static int sprd_spi_setup_transfer(struct spi_device *sdev,
 	if (ret)
 		return ret;
 
-	/* Set tansfer speed and valid bits */
+	/* Set transfer speed and valid bits */
 	sprd_spi_set_speed(ss, t->speed_hz);
 	sprd_spi_set_transfer_bits(ss, bits_per_word);
 

drivers/spi/spi-tegra20-slink.c

@@ -542,7 +542,7 @@ static int tegra_slink_start_dma_based_transfer(
 	if (tspi->is_packed) {
 		val |= SLINK_PACKED;
 		tegra_slink_writel(tspi, val, SLINK_DMA_CTL);
-		/* HW need small delay after settign Packed mode */
+		/* HW need small delay after setting Packed mode */
 		udelay(1);
 	}
 	tspi->dma_control_reg = val;