diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 3ba680af3ef5..4a5798a0ce0c 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1327,14 +1327,6 @@ config INTEL_CHTDC_TI_PWRBTN To compile this driver as a module, choose M here: the module will be called intel_chtdc_ti_pwrbtn. -config INTEL_MID_POWER_BUTTON - tristate "power button driver for Intel MID platforms" - depends on INTEL_SCU && INPUT - help - This driver handles the power button on the Intel MID platforms. - - If unsure, say N. - config INTEL_MRFLD_PWRBTN tristate "Intel Merrifield Basin Cove power button driver" depends on INTEL_SOC_PMIC_MRFLD diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 6fb57502b59a..728ccc226a29 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -137,7 +137,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o # Intel PMIC / PMC / P-Unit devices obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o -obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c deleted file mode 100644 index df434abbb66f..000000000000 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Power button driver for Intel MID platforms. - * - * Copyright (C) 2010,2017 Intel Corp - * - * Author: Hong Liu - * Author: Andy Shevchenko - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define DRIVER_NAME "msic_power_btn" - -#define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */ - -/* - * MSIC document ti_datasheet defines the 1st bit reg 0x21 is used to mask - * power button interrupt - */ -#define MSIC_PWRBTNM (1 << 0) - -/* Intel Tangier */ -#define BCOVE_PB_LEVEL (1 << 4) /* 1 - release, 0 - press */ - -/* Basin Cove PMIC */ -#define BCOVE_PBIRQ 0x02 -#define BCOVE_IRQLVL1MSK 0x0c -#define BCOVE_PBIRQMASK 0x0d -#define BCOVE_PBSTATUS 0x27 - -struct mid_pb_ddata { - struct device *dev; - int irq; - struct input_dev *input; - unsigned short mirqlvl1_addr; - unsigned short pbstat_addr; - u8 pbstat_mask; - struct intel_scu_ipc_dev *scu; - int (*setup)(struct mid_pb_ddata *ddata); -}; - -static int mid_pbstat(struct mid_pb_ddata *ddata, int *value) -{ - struct input_dev *input = ddata->input; - int ret; - u8 pbstat; - - ret = intel_scu_ipc_dev_ioread8(ddata->scu, ddata->pbstat_addr, - &pbstat); - if (ret) - return ret; - - dev_dbg(input->dev.parent, "PB_INT status= %d\n", pbstat); - - *value = !(pbstat & ddata->pbstat_mask); - return 0; -} - -static int mid_irq_ack(struct mid_pb_ddata *ddata) -{ - return intel_scu_ipc_dev_update(ddata->scu, ddata->mirqlvl1_addr, 0, - MSIC_PWRBTNM); -} - -static int mrfld_setup(struct mid_pb_ddata *ddata) -{ - /* Unmask the PBIRQ and MPBIRQ on Tangier */ - intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQ, 0, MSIC_PWRBTNM); - intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM); - - return 0; -} - -static irqreturn_t mid_pb_isr(int irq, void *dev_id) -{ - struct mid_pb_ddata *ddata = dev_id; - struct input_dev *input = ddata->input; - int value = 0; - int ret; - - ret = mid_pbstat(ddata, &value); - if (ret < 0) { - dev_err(input->dev.parent, - "Read error %d while reading MSIC_PB_STATUS\n", ret); - } else { - input_event(input, EV_KEY, KEY_POWER, value); - input_sync(input); - } - - mid_irq_ack(ddata); - return IRQ_HANDLED; -} - -static const struct mid_pb_ddata mfld_ddata = { - .mirqlvl1_addr = INTEL_MSIC_IRQLVL1MSK, - .pbstat_addr = INTEL_MSIC_PBSTATUS, - .pbstat_mask = MSIC_PB_LEVEL, -}; - -static const struct mid_pb_ddata mrfld_ddata = { - .mirqlvl1_addr = BCOVE_IRQLVL1MSK, - .pbstat_addr = BCOVE_PBSTATUS, - .pbstat_mask = BCOVE_PB_LEVEL, - .setup = mrfld_setup, -}; - -static const struct x86_cpu_id mid_pb_cpu_ids[] = { - X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_MID, &mfld_ddata), - X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &mrfld_ddata), - {} -}; - -static int mid_pb_probe(struct platform_device *pdev) -{ - const struct x86_cpu_id *id; - struct mid_pb_ddata *ddata; - struct input_dev *input; - int irq = platform_get_irq(pdev, 0); - int error; - - id = x86_match_cpu(mid_pb_cpu_ids); - if (!id) - return -ENODEV; - - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); - return irq; - } - - input = devm_input_allocate_device(&pdev->dev); - if (!input) - return -ENOMEM; - - input->name = pdev->name; - input->phys = "power-button/input0"; - input->id.bustype = BUS_HOST; - input->dev.parent = &pdev->dev; - - input_set_capability(input, EV_KEY, KEY_POWER); - - ddata = devm_kmemdup(&pdev->dev, (void *)id->driver_data, - sizeof(*ddata), GFP_KERNEL); - if (!ddata) - return -ENOMEM; - - ddata->dev = &pdev->dev; - ddata->irq = irq; - ddata->input = input; - - if (ddata->setup) { - error = ddata->setup(ddata); - if (error) - return error; - } - - ddata->scu = devm_intel_scu_ipc_dev_get(&pdev->dev); - if (!ddata->scu) - return -EPROBE_DEFER; - - error = devm_request_threaded_irq(&pdev->dev, irq, NULL, mid_pb_isr, - IRQF_ONESHOT, DRIVER_NAME, ddata); - if (error) { - dev_err(&pdev->dev, - "Unable to request irq %d for MID power button\n", irq); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, - "Unable to register input dev, error %d\n", error); - return error; - } - - platform_set_drvdata(pdev, ddata); - - /* - * SCU firmware might send power button interrupts to IA core before - * kernel boots and doesn't get EOI from IA core. The first bit of - * MSIC reg 0x21 is kept masked, and SCU firmware doesn't send new - * power interrupt to Android kernel. Unmask the bit when probing - * power button in kernel. - * There is a very narrow race between irq handler and power button - * initialization. The race happens rarely. So we needn't worry - * about it. - */ - error = mid_irq_ack(ddata); - if (error) { - dev_err(&pdev->dev, - "Unable to clear power button interrupt, error: %d\n", - error); - return error; - } - - device_init_wakeup(&pdev->dev, true); - dev_pm_set_wake_irq(&pdev->dev, irq); - - return 0; -} - -static int mid_pb_remove(struct platform_device *pdev) -{ - dev_pm_clear_wake_irq(&pdev->dev); - device_init_wakeup(&pdev->dev, false); - - return 0; -} - -static struct platform_driver mid_pb_driver = { - .driver = { - .name = DRIVER_NAME, - }, - .probe = mid_pb_probe, - .remove = mid_pb_remove, -}; - -module_platform_driver(mid_pb_driver); - -MODULE_AUTHOR("Hong Liu "); -MODULE_DESCRIPTION("Intel MID Power Button Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME);