ata changes for 6.10-rc1

- Convert the bindings for the imx-pata and ahci-da850 drivers to DT schemas (from Animesh). - Correct the code to handle HAS_IOPORT dependencies and conditionally compile drivers as needed (From Niklas). - Correct the legacy_exit() function in the pata_legacy driver to properly handle cleanups on driver exit (From Serget). - Small code simplification removing the ata_exec_internal_sg() function and folding it into its only caller (From me). -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZkIUiwAKCRDdoc3SxdoY dpYeAP4pECL0pY5R+4gk2kCfecYkR7yFg7c762/PK8WBH90clAD/WkcxjMIuuHA2 ra0d2eAfyj1sgJwbjkKrClQaUJGb3Qs= =jzk4 -----END PGP SIGNATURE----- Merge tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Damien Le Moal: - Convert the bindings for the imx-pata and ahci-da850 drivers to DT schemas (from Animesh) - Correct the code to handle HAS_IOPORT dependencies and conditionally compile drivers as needed (from Niklas) - Correct the legacy_exit() function in the pata_legacy driver to properly handle cleanups on driver exit (from Sergey) - Small code simplification removing the ata_exec_internal_sg() function and folding it into its only caller (from me) * tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_legacy: make legacy_exit() work again ata: libata-core: Remove ata_exec_internal_sg() ata: add HAS_IOPORT dependencies dt-bindings: ata: ahci-da850: Convert to dtschema dt-bindings: ata: imx-pata: Convert to dtschema
2024-12-29 17:25:38 +00:00 · 2024-05-14 17:59:52 -07:00 · 2024-05-14 17:59:52 -07:00 · b2665fe61d
commit b2665fe61d
parent b47c18232a d4a89339f1
9 changed files with 139 additions and 132 deletions
--- a/Documentation/devicetree/bindings/ata/ahci-da850.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@ -1,18 +0,0 @@
-Device tree binding for the TI DA850 AHCI SATA Controller
---------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,da850-ahci"
-  - reg: physical base addresses and sizes of the two register regions
-         used by the controller: the register map as defined by the
-         AHCI 1.1 standard and the Power Down Control Register (PWRDN)
-         for enabling/disabling the SATA clock receiver
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-
-Example:
-
-	sata: sata@218000 {
-		compatible = "ti,da850-ahci";
-		reg = <0x218000 0x2000>, <0x22c018 0x4>;
-		interrupts = <67>;
-	};
--- a/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
+++ b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx31-pata
+              - fsl,imx51-pata
+          - const: fsl,imx27-pata
+      - const: fsl,imx27-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: PATA Controller interrupts
+
+  clocks:
+    items:
+      - description: PATA Controller clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pata: pata@83fe0000 {
+        compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+        reg = <0x83fe0000 0x4000>;
+        interrupts = <70>;
+        clocks = <&clks 161>;
+    };
--- a/Documentation/devicetree/bindings/ata/imx-pata.txt
+++ b/Documentation/devicetree/bindings/ata/imx-pata.txt
@ -1,16 +0,0 @@
-* Freescale i.MX PATA Controller
-
-Required properties:
- compatible: "fsl,imx27-pata"
- reg: Address range of the PATA Controller
- interrupts: The interrupt of the PATA Controller
- clocks: the clocks for the PATA Controller
-
-Example:
-
-	pata: pata@83fe0000 {
-		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
-		reg = <0x83fe0000 0x4000>;
-		interrupts = <70>;
-		clocks = <&clks 161>;
-	};
--- a/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml
@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,da850-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA850 AHCI SATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: ti,da850-ahci
+
+  reg:
+    items:
+      - description: Address and size of the register map as defined by the AHCI 1.1 standard.
+      - description:
+          Address and size of Power Down Control Register (PWRDN) for enabling/disabling the SATA clock
+          receiver.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@218000 {
+        compatible = "ti,da850-ahci";
+        reg = <0x218000 0x2000>, <0x22c018 0x4>;
+        interrupts = <67>;
+    };
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@ -556,7 +556,7 @@ comment "PATA SFF controllers with BMDMA"

 config PATA_ALI
 	tristate "ALi PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the ALi ATA interfaces
@ -566,7 +566,7 @@ config PATA_ALI

 config PATA_AMD
 	tristate "AMD/NVidia PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the AMD and NVidia PATA
@ -584,7 +584,7 @@ config PATA_ARASAN_CF

 config PATA_ARTOP
 	tristate "ARTOP 6210/6260 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for ARTOP PATA controllers.

@ -611,7 +611,7 @@ config PATA_ATP867X

 config PATA_CMD64X
 	tristate "CMD64x PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD64x series chips
@ -658,7 +658,7 @@ config PATA_CS5536

 config PATA_CYPRESS
 	tristate "Cypress CY82C693 PATA support (Very Experimental)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the Cypress/Contaq CY82C693
@ -706,7 +706,7 @@ config PATA_HPT366

 config PATA_HPT37X
 	tristate "HPT 370/370A/371/372/374/302 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the majority of the later HPT
 	  PATA controllers via the new ATA layer.
@ -715,7 +715,7 @@ config PATA_HPT37X

 config PATA_HPT3X2N
 	tristate "HPT 371N/372N/302N PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the N variant HPT PATA
 	  controllers via the new ATA layer.
@ -818,7 +818,7 @@ config PATA_MPC52xx

 config PATA_NETCELL
 	tristate "NETCELL Revolution RAID support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Netcell Revolution RAID
 	  PATA controller.
@ -854,7 +854,7 @@ config PATA_OLDPIIX

 config PATA_OPTIDMA
 	tristate "OPTI FireStar PATA support (Very Experimental)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables DMA/PIO support for the later OPTi
 	  controllers found on some old motherboards and in some
@ -864,7 +864,7 @@ config PATA_OPTIDMA

 config PATA_PDC2027X
 	tristate "Promise PATA 2027x support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.

@ -872,7 +872,7 @@ config PATA_PDC2027X

 config PATA_PDC_OLD
 	tristate "Older Promise PATA controller support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
 	  20265 and 20267 adapters.
@ -900,7 +900,7 @@ config PATA_RDC

 config PATA_SC1200
 	tristate "SC1200 PATA support"
-	depends on PCI && (X86_32 || COMPILE_TEST)
+	depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
@ -918,7 +918,7 @@ config PATA_SCH

 config PATA_SERVERWORKS
 	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 	  HT1000 PATA controllers, via the new ATA layer.
@ -1182,7 +1182,7 @@ config ATA_GENERIC

 config PATA_LEGACY
 	tristate "Legacy ISA PATA support (Experimental)"
-	depends on (ISA || PCI)
+	depends on (ISA || PCI) && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for ISA/VLB/PCI bus legacy PATA
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@ -1480,19 +1480,19 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 }

 /**
- *	ata_exec_internal_sg - execute libata internal command
+ *	ata_exec_internal - execute libata internal command
 *	@dev: Device to which the command is sent
 *	@tf: Taskfile registers for the command and the result
 *	@cdb: CDB for packet command
 *	@dma_dir: Data transfer direction of the command
- *	@sgl: sg list for the data buffer of the command
- *	@n_elem: Number of sg entries
+ *	@buf: Data buffer of the command
+ *	@buflen: Length of data buffer
 *	@timeout: Timeout in msecs (0 for default)
 *
- *	Executes libata internal command with timeout.  @tf contains
- *	command on entry and result on return.  Timeout and error
- *	conditions are reported via return value.  No recovery action
- *	is taken after a command times out.  It's caller's duty to
+ *	Executes libata internal command with timeout. @tf contains
+ *	the command on entry and the result on return. Timeout and error
+ *	conditions are reported via the return value. No recovery action
+ *	is taken after a command times out. It is the caller's duty to
 *	clean up after timeout.
 *
 *	LOCKING:
@ -1501,34 +1501,38 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 *	RETURNS:
 *	Zero on success, AC_ERR_* mask on failure
 */
-static unsigned ata_exec_internal_sg(struct ata_device *dev,
-				     struct ata_taskfile *tf, const u8 *cdb,
-				     int dma_dir, struct scatterlist *sgl,
-				     unsigned int n_elem, unsigned int timeout)
+unsigned int ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf,
+			       const u8 *cdb, enum dma_data_direction dma_dir,
+			       void *buf, unsigned int buflen,
+			       unsigned int timeout)
 {
 	struct ata_link *link = dev->link;
 	struct ata_port *ap = link->ap;
 	u8 command = tf->command;
-	int auto_timeout = 0;
 	struct ata_queued_cmd *qc;
+	struct scatterlist sgl;
 	unsigned int preempted_tag;
 	u32 preempted_sactive;
 	u64 preempted_qc_active;
 	int preempted_nr_active_links;
+	bool auto_timeout = false;
 	DECLARE_COMPLETION_ONSTACK(wait);
 	unsigned long flags;
 	unsigned int err_mask;
 	int rc;

+	if (WARN_ON(dma_dir != DMA_NONE && !buf))
+		return AC_ERR_INVALID;
+
 	spin_lock_irqsave(ap->lock, flags);

-	/* no internal command while frozen */
+	/* No internal command while frozen */
 	if (ata_port_is_frozen(ap)) {
 		spin_unlock_irqrestore(ap->lock, flags);
 		return AC_ERR_SYSTEM;
 	}

-	/* initialize internal qc */
+	/* Initialize internal qc */
 	qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL);

 	qc->tag = ATA_TAG_INTERNAL;
@ -1547,12 +1551,12 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	ap->qc_active = 0;
 	ap->nr_active_links = 0;

-	/* prepare & issue qc */
+	/* Prepare and issue qc */
 	qc->tf = *tf;
 	if (cdb)
 		memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);

-	/* some SATA bridges need us to indicate data xfer direction */
+	/* Some SATA bridges need us to indicate data xfer direction */
 	if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
 	    dma_dir == DMA_FROM_DEVICE)
 		qc->tf.feature |= ATAPI_DMADIR;
@ -1560,13 +1564,8 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	qc->flags |= ATA_QCFLAG_RESULT_TF;
 	qc->dma_dir = dma_dir;
 	if (dma_dir != DMA_NONE) {
-		unsigned int i, buflen = 0;
-		struct scatterlist *sg;
-
-		for_each_sg(sgl, sg, n_elem, i)
-			buflen += sg->length;
-
-		ata_sg_init(qc, sgl, n_elem);
+		sg_init_one(&sgl, buf, buflen);
+		ata_sg_init(qc, &sgl, 1);
 		qc->nbytes = buflen;
 	}

@ -1578,11 +1577,11 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	spin_unlock_irqrestore(ap->lock, flags);

 	if (!timeout) {
-		if (ata_probe_timeout)
+		if (ata_probe_timeout) {
 			timeout = ata_probe_timeout * 1000;
-		else {
+		} else {
 			timeout = ata_internal_cmd_timeout(dev, command);
-			auto_timeout = 1;
+			auto_timeout = true;
 		}
 	}

@ -1595,30 +1594,25 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	ata_sff_flush_pio_task(ap);

 	if (!rc) {
-		spin_lock_irqsave(ap->lock, flags);
-
-		/* We're racing with irq here.  If we lose, the
-		 * following test prevents us from completing the qc
-		 * twice.  If we win, the port is frozen and will be
-		 * cleaned up by ->post_internal_cmd().
+		/*
+		 * We are racing with irq here. If we lose, the following test
+		 * prevents us from completing the qc twice. If we win, the port
+		 * is frozen and will be cleaned up by ->post_internal_cmd().
 		 */
+		spin_lock_irqsave(ap->lock, flags);
 		if (qc->flags & ATA_QCFLAG_ACTIVE) {
 			qc->err_mask |= AC_ERR_TIMEOUT;
-
 			ata_port_freeze(ap);
-
 			ata_dev_warn(dev, "qc timeout after %u msecs (cmd 0x%x)\n",
 				     timeout, command);
 		}
-
 		spin_unlock_irqrestore(ap->lock, flags);
 	}

-	/* do post_internal_cmd */
 	if (ap->ops->post_internal_cmd)
 		ap->ops->post_internal_cmd(qc);

-	/* perform minimal error analysis */
+	/* Perform minimal error analysis */
 	if (qc->flags & ATA_QCFLAG_EH) {
 		if (qc->result_tf.status & (ATA_ERR | ATA_DF))
 			qc->err_mask |= AC_ERR_DEV;
@ -1632,7 +1626,7 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 		qc->result_tf.status |= ATA_SENSE;
 	}

-	/* finish up */
+	/* Finish up */
 	spin_lock_irqsave(ap->lock, flags);

 	*tf = qc->result_tf;
@ -1652,44 +1646,6 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	return err_mask;
 }

-/**
- *	ata_exec_internal - execute libata internal command
- *	@dev: Device to which the command is sent
- *	@tf: Taskfile registers for the command and the result
- *	@cdb: CDB for packet command
- *	@dma_dir: Data transfer direction of the command
- *	@buf: Data buffer of the command
- *	@buflen: Length of data buffer
- *	@timeout: Timeout in msecs (0 for default)
- *
- *	Wrapper around ata_exec_internal_sg() which takes simple
- *	buffer instead of sg list.
- *
- *	LOCKING:
- *	None.  Should be called with kernel context, might sleep.
- *
- *	RETURNS:
- *	Zero on success, AC_ERR_* mask on failure
- */
-unsigned ata_exec_internal(struct ata_device *dev,
-			   struct ata_taskfile *tf, const u8 *cdb,
-			   int dma_dir, void *buf, unsigned int buflen,
-			   unsigned int timeout)
-{
-	struct scatterlist *psg = NULL, sg;
-	unsigned int n_elem = 0;
-
-	if (dma_dir != DMA_NONE) {
-		WARN_ON(!buf);
-		sg_init_one(&sg, buf, buflen);
-		psg = &sg;
-		n_elem++;
-	}
-
-	return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
-				    timeout);
-}
-
 /**
 *	ata_pio_need_iordy	-	check if iordy needed
 *	@adev: ATA device
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@ -3032,6 +3032,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
 */
 int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 {
+#ifdef CONFIG_HAS_IOPORT
 	unsigned long bmdma = pci_resource_start(pdev, 4);
 	u8 simplex;

@ -3044,6 +3045,9 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 	if (simplex & 0x80)
 		return -EOPNOTSUPP;
 	return 0;
+#else
+	return -ENOENT;
+#endif /* CONFIG_HAS_IOPORT */
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);

--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@ -50,10 +50,10 @@ extern int ata_build_rw_tf(struct ata_queued_cmd *qc, u64 block, u32 n_block,
 			   unsigned int tf_flags, int dld, int class);
 extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
 			     struct ata_device *dev);
-extern unsigned ata_exec_internal(struct ata_device *dev,
-				  struct ata_taskfile *tf, const u8 *cdb,
-				  int dma_dir, void *buf, unsigned int buflen,
-				  unsigned int timeout);
+unsigned int ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf,
+			       const u8 *cdb, enum dma_data_direction dma_dir,
+			       void *buf, unsigned int buflen,
+			       unsigned int timeout);
 extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
 			  int (*check_ready)(struct ata_link *link));
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@ -173,8 +173,6 @@ static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
 static struct legacy_probe probe_list[NR_HOST];
 static struct legacy_data legacy_data[NR_HOST];
 static struct ata_host *legacy_host[NR_HOST];
-static int nr_legacy_host;
-

 /**
 *	legacy_probe_add	-	Add interface to probe list
@ -1276,9 +1274,11 @@ static __exit void legacy_exit(void)
 {
 	int i;

-	for (i = 0; i < nr_legacy_host; i++) {
+	for (i = 0; i < NR_HOST; i++) {
 		struct legacy_data *ld = &legacy_data[i];
-		ata_host_detach(legacy_host[i]);
+
+		if (legacy_host[i])
+			ata_host_detach(legacy_host[i]);
 		platform_device_unregister(ld->platform_dev);
 	}
 }