diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt deleted file mode 100644 index 00c8ebb2fd18..000000000000 --- a/Documentation/scsi/osst.txt +++ /dev/null @@ -1,218 +0,0 @@ -README file for the osst driver -=============================== -(w) Kurt Garloff 12/2000 - -This file describes the osst driver as of version 0.8.x/0.9.x, the released -version of the osst driver. -It is intended to help advanced users to understand the role of osst and to -get them started using (and maybe debugging) it. -It won't address issues like "How do I compile a kernel?" or "How do I load -a module?", as these are too basic. -Once the OnStream got merged into the official kernel, the distro makers -will provide the OnStream support for those who are not familiar with -hacking their kernels. - - -Purpose -------- -The osst driver was developed, because the standard SCSI tape driver in -Linux, st, does not support the OnStream SC-x0 SCSI tape. The st is not to -blame for that, as the OnStream tape drives do not support the standard SCSI -command set for Serial Access Storage Devices (SASDs), which basically -corresponds to the QIC-157 spec. -Nevertheless, the OnStream tapes are nice pieces of hardware and therefore -the osst driver has been written to make these tape devs supported by Linux. -The driver is free software. It's released under the GNU GPL and planned to -be integrated into the mainstream kernel. - - -Implementation --------------- -The osst is a new high-level SCSI driver, just like st, sr, sd and sg. It -can be compiled into the kernel or loaded as a module. -As it represents a new device, it got assigned a new device node: /dev/osstX -are character devices with major no 206 and minor numbers like the /dev/stX -devices. If those are not present, you may create them by calling -Makedevs.sh as root (see below). -The driver started being a copy of st and as such, the osst devices' -behavior looks very much the same as st to the userspace applications. - - -History -------- -In the first place, osst shared its identity very much with st. That meant -that it used the same kernel structures and the same device node as st. -So you could only have either of them being present in the kernel. This has -been fixed by registering an own device, now. -st and osst can coexist, each only accessing the devices it can support by -themselves. - - -Installation ------------- -osst got integrated into the linux kernel. Select it during kernel -configuration as module or compile statically into the kernel. -Compile your kernel and install the modules. - -Now, your osst driver is inside the kernel or available as a module, -depending on your choice during kernel config. You may still need to create -the device nodes by calling the Makedevs.sh script (see below) manually. - -To load your module, you may use the command -modprobe osst -as root. dmesg should show you, whether your OnStream tapes have been -recognized. - -If you want to have the module autoloaded on access to /dev/osst, you may -add something like -alias char-major-206 osst -to a file under /etc/modprobe.d/ directory. - -You may find it convenient to create a symbolic link -ln -s nosst0 /dev/tape -to make programs assuming a default name of /dev/tape more convenient to -use. - -The device nodes for osst have to be created. Use the Makedevs.sh script -attached to this file. - - -Using it --------- -You may use the OnStream tape driver with your standard backup software, -which may be tar, cpio, amanda, arkeia, BRU, Lone Tar, ... -by specifying /dev/(n)osst0 as the tape device to use or using the above -symlink trick. The IOCTLs to control tape operation are also mostly -supported and you may try the mt (or mt_st) program to jump between -filemarks, eject the tape, ... - -There's one limitation: You need to use a block size of 32kB. - -(This limitation is worked on and will be fixed in version 0.8.8 of - this driver.) - -If you just want to get started with standard software, here is an example -for creating and restoring a full backup: -# Backup -tar cvf - / --exclude /proc | buffer -s 32k -m 24M -B -t -o /dev/nosst0 -# Restore -buffer -s 32k -m 8M -B -t -i /dev/osst0 | tar xvf - -C / - -The buffer command has been used to buffer the data before it goes to the -tape (or the file system) in order to smooth out the data stream and prevent -the tape from needing to stop and rewind. The OnStream does have an internal -buffer and a variable speed which help this, but especially on writing, the -buffering still proves useful in most cases. It also pads the data to -guarantees the block size of 32k. (Otherwise you may pass the -b64 option to -tar.) -Expect something like 1.8MB/s for the SC-x0 drives and 0.9MB/s for the DI-30. -The USB drive will give you about 0.7MB/s. -On a fast machine, you may profit from software data compression (z flag for -tar). - - -USB and IDE ------------ -Via the SCSI emulation layers usb-storage and ide-scsi, you can also use the -osst driver to drive the USB-30 and the DI-30 drives. (Unfortunately, there -is no such layer for the parallel port, otherwise the DP-30 would work as -well.) For the USB support, you need the latest 2.4.0-test kernels and the -latest usb-storage driver from -http://www.linux-usb.org/ -http://sourceforge.net/cvs/?group_id=3581 - -Note that the ide-tape driver as of 1.16f uses a slightly outdated on-tape -format and therefore is not completely interoperable with osst tapes. - -The ADR-x0 line is fully SCSI-2 compliant and is supported by st, not osst. -The on-tape format is supposed to be compatible with the one used by osst. - - -Feedback and updates --------------------- -The driver development is coordinated through a mailing list - -a CVS repository and some web pages. -The tester's pages which contain recent news and updated drivers to download -can be found on -http://sourceforge.net/projects/osst/ - -If you find any problems, please have a look at the tester's page in order -to see whether the problem is already known and solved. Otherwise, please -report it to the mailing list. Your feedback is welcome. (This holds also -for reports of successful usage, of course.) -In case of trouble, please do always provide the following info: -* driver and kernel version used (see syslog) -* driver messages (syslog) -* SCSI config and OnStream Firmware (/proc/scsi/scsi) -* description of error. Is it reproducible? -* software and commands used - -You may subscribe to the mailing list, BTW, it's a majordomo list. - - -Status ------- -0.8.0 was the first widespread BETA release. Since then a lot of reports -have been sent, but mostly reported success or only minor trouble. -All the issues have been addressed. -Check the web pages for more info about the current developments. -0.9.x is the tree for the 2.3/2.4 kernel. - - -Acknowledgments ----------------- -The driver has been started by making a copy of Kai Makisara's st driver. -Most of the development has been done by Willem Riede. The presence of the -userspace program osg (onstreamsg) from Terry Hardie has been rather -helpful. The same holds for Gadi Oxman's ide-tape support for the DI-30. -I did add some patches to those drivers as well and coordinated things a -little bit. -Note that most of them did mostly spend their spare time for the creation of -this driver. -The people from OnStream, especially Jack Bombeeck did support this project -and always tried to answer HW or FW related questions. Furthermore, he -pushed the FW developers to do the right things. -SuSE did support this project by allowing me to work on it during my working -time for them and by integrating the driver into their distro. - -More people did help by sending useful comments. Sorry to those who have -been forgotten. Thanks to all the GNU/FSF and Linux developers who made this -platform such an interesting, nice and stable platform. -Thanks go to those who tested the drivers and did send useful reports. Your -help is needed! - - -Makedevs.sh ------------ -#!/bin/sh -# Script to create OnStream SC-x0 device nodes (major 206) -# Usage: Makedevs.sh [nos [path to dev]] -# $Id: README.osst.kernel,v 1.4 2000/12/20 14:13:15 garloff Exp $ -major=206 -nrs=4 -dir=/dev -test -z "$1" || nrs=$1 -test -z "$2" || dir=$2 -declare -i nr -nr=0 -test -d $dir || mkdir -p $dir -while test $nr -lt $nrs; do - mknod $dir/osst$nr c $major $nr - chown 0.disk $dir/osst$nr; chmod 660 $dir/osst$nr; - mknod $dir/nosst$nr c $major $[nr+128] - chown 0.disk $dir/nosst$nr; chmod 660 $dir/nosst$nr; - mknod $dir/osst${nr}l c $major $[nr+32] - chown 0.disk $dir/osst${nr}l; chmod 660 $dir/osst${nr}l; - mknod $dir/nosst${nr}l c $major $[nr+160] - chown 0.disk $dir/nosst${nr}l; chmod 660 $dir/nosst${nr}l; - mknod $dir/osst${nr}m c $major $[nr+64] - chown 0.disk $dir/osst${nr}m; chmod 660 $dir/osst${nr}m; - mknod $dir/nosst${nr}m c $major $[nr+192] - chown 0.disk $dir/nosst${nr}m; chmod 660 $dir/nosst${nr}m; - mknod $dir/osst${nr}a c $major $[nr+96] - chown 0.disk $dir/osst${nr}a; chmod 660 $dir/osst${nr}a; - mknod $dir/nosst${nr}a c $major $[nr+224] - chown 0.disk $dir/nosst${nr}a; chmod 660 $dir/nosst${nr}a; - let nr+=1 -done diff --git a/Documentation/scsi/ufs.txt b/Documentation/scsi/ufs.txt index 1769f71c4c20..81842ec3e116 100644 --- a/Documentation/scsi/ufs.txt +++ b/Documentation/scsi/ufs.txt @@ -158,6 +158,13 @@ send SG_IO with the applicable sg_io_v4: If you wish to read or write a descriptor, use the appropriate xferp of sg_io_v4. +The userspace tool that interacts with the ufs-bsg endpoint and uses its +upiu-based protocol is available at: + + https://github.com/westerndigitalcorporation/ufs-tool + +For more detailed information about the tool and its supported +features, please see the tool's README. UFS Specifications can be found at, UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf diff --git a/MAINTAINERS b/MAINTAINERS index 618e4979960b..f2ae76355d95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11779,16 +11779,6 @@ S: Maintained F: drivers/mtd/nand/onenand/ F: include/linux/mtd/onenand*.h -ONSTREAM SCSI TAPE DRIVER -M: Willem Riede -L: osst-users@lists.sourceforge.net -L: linux-scsi@vger.kernel.org -S: Maintained -F: Documentation/scsi/osst.txt -F: drivers/scsi/osst.* -F: drivers/scsi/osst_*.h -F: drivers/scsi/st.h - OP-TEE DRIVER M: Jens Wiklander S: Maintained @@ -12680,8 +12670,7 @@ S: Orphan F: drivers/scsi/pmcraid.* PMC SIERRA PM8001 DRIVER -M: Jack Wang -M: lindar_liu@usish.com +M: Jack Wang L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/pm8001/ diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index 11be08f4f750..205ac75da13d 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -911,6 +911,10 @@ static const struct resource mac_scsi_iifx_rsrc[] __initconst = { .flags = IORESOURCE_MEM, .start = 0x50008000, .end = 0x50009FFF, + }, { + .flags = IORESOURCE_MEM, + .start = 0x50008000, + .end = 0x50009FFF, }, }; @@ -1012,10 +1016,12 @@ int __init mac_platform_init(void) case MAC_SCSI_IIFX: /* Addresses from The Guide to Mac Family Hardware. * $5000 8000 - $5000 9FFF: SCSI DMA + * $5000 A000 - $5000 BFFF: Alternate SCSI * $5000 C000 - $5000 DFFF: Alternate SCSI (DMA) * $5000 E000 - $5000 FFFF: Alternate SCSI (Hsk) - * The SCSI DMA custom IC embeds the 53C80 core. mac_scsi does - * not make use of its DMA or hardware handshaking logic. + * The A/UX header file sys/uconfig.h says $50F0 8000. + * The "SCSI DMA" custom IC embeds the 53C80 core and + * supports Programmed IO, DMA and PDMA (hardware handshake). */ platform_device_register_simple("mac_scsi", 0, mac_scsi_iifx_rsrc, ARRAY_SIZE(mac_scsi_iifx_rsrc)); diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 4305da2c9037..d5cbad2c61e4 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -2340,7 +2340,6 @@ static void srp_handle_qp_err(struct ib_cq *cq, struct ib_wc *wc, static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd) { struct srp_target_port *target = host_to_target(shost); - struct srp_rport *rport = target->rport; struct srp_rdma_ch *ch; struct srp_request *req; struct srp_iu *iu; @@ -2350,16 +2349,6 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd) u32 tag; u16 idx; int len, ret; - const bool in_scsi_eh = !in_interrupt() && current == shost->ehandler; - - /* - * The SCSI EH thread is the only context from which srp_queuecommand() - * can get invoked for blocked devices (SDEV_BLOCK / - * SDEV_CREATED_BLOCK). Avoid racing with srp_reconnect_rport() by - * locking the rport mutex if invoked from inside the SCSI EH. - */ - if (in_scsi_eh) - mutex_lock(&rport->mutex); scmnd->result = srp_chkready(target->rport); if (unlikely(scmnd->result)) @@ -2428,13 +2417,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd) goto err_unmap; } - ret = 0; - -unlock_rport: - if (in_scsi_eh) - mutex_unlock(&rport->mutex); - - return ret; + return 0; err_unmap: srp_unmap_data(scmnd, ch, req); @@ -2456,7 +2439,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd) ret = SCSI_MLQUEUE_HOST_BUSY; } - goto unlock_rport; + return ret; } /* diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index d8882b0a1338..c2dd322691d1 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -6001,13 +6001,12 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) if (mpt_config(ioc, &cfg) != 0) goto out; - mem = kmalloc(iocpage2sz, GFP_KERNEL); + mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL); if (!mem) { rc = -ENOMEM; goto out; } - memcpy(mem, (u8 *)pIoc2, iocpage2sz); ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; mpt_read_ioc_pg_3(ioc); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f31b6b780eaf..75f66f8ad3ea 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -99,28 +99,6 @@ config CHR_DEV_ST To compile this driver as a module, choose M here and read . The module will be called st. -config CHR_DEV_OSST - tristate "SCSI OnStream SC-x0 tape support" - depends on SCSI - ---help--- - The OnStream SC-x0 SCSI tape drives cannot be driven by the - standard st driver, but instead need this special osst driver and - use the /dev/osstX char device nodes (major 206). Via usb-storage, - you may be able to drive the USB-x0 and DI-x0 drives as well. - Note that there is also a second generation of OnStream - tape drives (ADR-x0) that supports the standard SCSI-2 commands for - tapes (QIC-157) and can be driven by the standard driver st. - For more information, you may have a look at the SCSI-HOWTO - and - in the kernel source. - More info on the OnStream driver may be found on - - Please also have a look at the standard st docu, as most of it - applies to osst as well. - - To compile this driver as a module, choose M here and read - . The module will be called osst. - config BLK_DEV_SR tristate "SCSI CDROM support" depends on SCSI && BLK_DEV @@ -664,6 +642,41 @@ config SCSI_DMX3191D To compile this driver as a module, choose M here: the module will be called dmx3191d. +config SCSI_FDOMAIN + tristate + depends on SCSI + +config SCSI_FDOMAIN_PCI + tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support" + depends on PCI && SCSI + select SCSI_FDOMAIN + help + This is support for Future Domain's PCI SCSI host adapters (TMC-3260) + and other adapters with PCI bus based on the Future Domain chipsets + (Adaptec AHA-2920A). + + NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip + and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI + controller support"). This Future Domain driver works with the older + Adaptec AHA-2920A boards with a Future Domain chip on them. + + To compile this driver as a module, choose M here: the + module will be called fdomain_pci. + +config SCSI_FDOMAIN_ISA + tristate "Future Domain 16xx ISA SCSI support" + depends on ISA && SCSI + select CHECK_SIGNATURE + select SCSI_FDOMAIN + help + This is support for Future Domain's 16-bit SCSI host adapters + (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters + with ISA bus based on the Future Domain chipsets (Quantum ISA-200S, + ISA-250MG; and at least one IBM board). + + To compile this driver as a module, choose M here: the + module will be called fdomain_isa. + config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 8826111fdf4a..aeda53901064 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -76,6 +76,9 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o +obj-$(CONFIG_SCSI_FDOMAIN) += fdomain.o +obj-$(CONFIG_SCSI_FDOMAIN_PCI) += fdomain_pci.o +obj-$(CONFIG_SCSI_FDOMAIN_ISA) += fdomain_isa.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o @@ -143,7 +146,6 @@ obj-$(CONFIG_SCSI_WD719X) += wd719x.o obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_CHR_DEV_ST) += st.o -obj-$(CONFIG_CHR_DEV_OSST) += osst.o obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o obj-$(CONFIG_CHR_DEV_SG) += sg.o diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index fe0535affc14..d9fa9cf2fd8b 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -709,6 +709,8 @@ static void NCR5380_main(struct work_struct *work) NCR5380_information_transfer(instance); done = 0; } + if (!hostdata->connected) + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); spin_unlock_irq(&hostdata->lock); if (!done) cond_resched(); @@ -1110,8 +1112,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) spin_lock_irq(&hostdata->lock); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_reselect(instance); - if (!hostdata->connected) - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n"); goto out; } @@ -1119,7 +1119,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) if (err < 0) { spin_lock_irq(&hostdata->lock); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); /* Can't touch cmd if it has been reclaimed by the scsi ML */ if (!hostdata->selecting) @@ -1157,7 +1156,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) if (err < 0) { shost_printk(KERN_ERR, instance, "select: REQ timeout\n"); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); goto out; } if (!hostdata->selecting) { @@ -1763,10 +1761,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) scmd_printk(KERN_INFO, cmd, "switching to slow handshake\n"); cmd->device->borken = 1; - sink = 1; - do_abort(instance); - cmd->result = DID_ERROR << 16; - /* XXX - need to source or sink data here, as appropriate */ + do_reset(instance); + bus_reset_cleanup(instance); } } else { /* Transfer a small chunk so that the @@ -1826,9 +1822,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) */ NCR5380_write(TARGET_COMMAND_REG, 0); - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - maybe_release_dma_irq(instance); return; case MESSAGE_REJECT: @@ -1860,8 +1853,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) */ NCR5380_write(TARGET_COMMAND_REG, 0); - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); #ifdef SUN3_SCSI_VME dregs->csr |= CSR_DMA_ENABLE; #endif @@ -1964,7 +1955,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) cmd->result = DID_ERROR << 16; complete_cmd(instance, cmd); maybe_release_dma_irq(instance); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return; } msgout = NOP; diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index efca509b92b0..5935fd6d1a05 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -235,7 +235,7 @@ struct NCR5380_cmd { #define NCR5380_PIO_CHUNK_SIZE 256 /* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */ -#define NCR5380_REG_POLL_TIME 15 +#define NCR5380_REG_POLL_TIME 10 static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) { diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg index ba0b411d03e2..00fde2243e48 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.reg +++ b/drivers/scsi/aic7xxx/aic7xxx.reg @@ -1666,7 +1666,7 @@ scratch_ram { size 6 /* * These are reserved registers in the card's scratch ram on the 2742. - * The EISA configuraiton chip is mapped here. On Rev E. of the + * The EISA configuration chip is mapped here. On Rev E. of the * aic7770, the sequencer can use this area for scratch, but the * host cannot directly access these registers. On later chips, this * area can be read and written by both the host and the sequencer. diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c index 730b35e7c1ba..604a5331f639 100644 --- a/drivers/scsi/aic94xx/aic94xx_dev.c +++ b/drivers/scsi/aic94xx/aic94xx_dev.c @@ -170,9 +170,7 @@ static int asd_init_target_ddb(struct domain_device *dev) } } else { flags |= CONCURRENT_CONN_SUPP; - if (!dev->parent && - (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || - dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)) + if (!dev->parent && dev_is_expander(dev->dev_type)) asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN, 4); else diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index 901a31632493..3b84db8d13a9 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -66,7 +66,7 @@ #include "bnx2fc_constants.h" #define BNX2FC_NAME "bnx2fc" -#define BNX2FC_VERSION "2.11.8" +#define BNX2FC_VERSION "2.12.10" #define PFX "bnx2fc: " @@ -75,8 +75,9 @@ #define BNX2X_DOORBELL_PCI_BAR 2 #define BNX2FC_MAX_BD_LEN 0xffff -#define BNX2FC_BD_SPLIT_SZ 0x8000 -#define BNX2FC_MAX_BDS_PER_CMD 256 +#define BNX2FC_BD_SPLIT_SZ 0xffff +#define BNX2FC_MAX_BDS_PER_CMD 255 +#define BNX2FC_FW_MAX_BDS_PER_CMD 255 #define BNX2FC_SQ_WQES_MAX 256 @@ -433,8 +434,10 @@ struct bnx2fc_cmd { void (*cb_func)(struct bnx2fc_els_cb_arg *cb_arg); struct bnx2fc_els_cb_arg *cb_arg; struct delayed_work timeout_work; /* timer for ULP timeouts */ - struct completion tm_done; - int wait_for_comp; + struct completion abts_done; + struct completion cleanup_done; + int wait_for_abts_comp; + int wait_for_cleanup_comp; u16 xid; struct fcoe_err_report_entry err_entry; struct fcoe_task_ctx_entry *task; @@ -455,6 +458,7 @@ struct bnx2fc_cmd { #define BNX2FC_FLAG_ELS_TIMEOUT 0xb #define BNX2FC_FLAG_CMD_LOST 0xc #define BNX2FC_FLAG_SRR_SENT 0xd +#define BNX2FC_FLAG_ISSUE_CLEANUP_REQ 0xe u8 rec_retry; u8 srr_retry; u32 srr_offset; diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c index 76e65a32f38c..754f2e82d955 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_els.c +++ b/drivers/scsi/bnx2fc/bnx2fc_els.c @@ -610,7 +610,6 @@ int bnx2fc_send_rec(struct bnx2fc_cmd *orig_io_req) rc = bnx2fc_initiate_els(tgt, ELS_REC, &rec, sizeof(rec), bnx2fc_rec_compl, cb_arg, r_a_tov); -rec_err: if (rc) { BNX2FC_IO_DBG(orig_io_req, "REC failed - release\n"); spin_lock_bh(&tgt->tgt_lock); @@ -618,6 +617,7 @@ int bnx2fc_send_rec(struct bnx2fc_cmd *orig_io_req) spin_unlock_bh(&tgt->tgt_lock); kfree(cb_arg); } +rec_err: return rc; } @@ -654,7 +654,6 @@ int bnx2fc_send_srr(struct bnx2fc_cmd *orig_io_req, u32 offset, u8 r_ctl) rc = bnx2fc_initiate_els(tgt, ELS_SRR, &srr, sizeof(srr), bnx2fc_srr_compl, cb_arg, r_a_tov); -srr_err: if (rc) { BNX2FC_IO_DBG(orig_io_req, "SRR failed - release\n"); spin_lock_bh(&tgt->tgt_lock); @@ -664,6 +663,7 @@ int bnx2fc_send_srr(struct bnx2fc_cmd *orig_io_req, u32 offset, u8 r_ctl) } else set_bit(BNX2FC_FLAG_SRR_SENT, &orig_io_req->req_flags); +srr_err: return rc; } @@ -854,33 +854,57 @@ void bnx2fc_process_els_compl(struct bnx2fc_cmd *els_req, kref_put(&els_req->refcount, bnx2fc_cmd_release); } +#define BNX2FC_FCOE_MAC_METHOD_GRANGED_MAC 1 +#define BNX2FC_FCOE_MAC_METHOD_FCF_MAP 2 +#define BNX2FC_FCOE_MAC_METHOD_FCOE_SET_MAC 3 static void bnx2fc_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) { struct fcoe_ctlr *fip = arg; struct fc_exch *exch = fc_seq_exch(seq); struct fc_lport *lport = exch->lp; - u8 *mac; - u8 op; + + struct fc_frame_header *fh; + u8 *granted_mac; + u8 fcoe_mac[6]; + u8 fc_map[3]; + int method; if (IS_ERR(fp)) goto done; - mac = fr_cb(fp)->granted_mac; - if (is_zero_ether_addr(mac)) { - op = fc_frame_payload_op(fp); - if (lport->vport) { - if (op == ELS_LS_RJT) { - printk(KERN_ERR PFX "bnx2fc_flogi_resp is LS_RJT\n"); - fc_vport_terminate(lport->vport); - fc_frame_free(fp); - return; - } - } - fcoe_ctlr_recv_flogi(fip, lport, fp); + fh = fc_frame_header_get(fp); + granted_mac = fr_cb(fp)->granted_mac; + + /* + * We set the source MAC for FCoE traffic based on the Granted MAC + * address from the switch. + * + * If granted_mac is non-zero, we use that. + * If the granted_mac is zeroed out, create the FCoE MAC based on + * the sel_fcf->fc_map and the d_id fo the FLOGI frame. + * If sel_fcf->fc_map is 0, then we use the default FCF-MAC plus the + * d_id of the FLOGI frame. + */ + if (!is_zero_ether_addr(granted_mac)) { + ether_addr_copy(fcoe_mac, granted_mac); + method = BNX2FC_FCOE_MAC_METHOD_GRANGED_MAC; + } else if (fip->sel_fcf && fip->sel_fcf->fc_map != 0) { + hton24(fc_map, fip->sel_fcf->fc_map); + fcoe_mac[0] = fc_map[0]; + fcoe_mac[1] = fc_map[1]; + fcoe_mac[2] = fc_map[2]; + fcoe_mac[3] = fh->fh_d_id[0]; + fcoe_mac[4] = fh->fh_d_id[1]; + fcoe_mac[5] = fh->fh_d_id[2]; + method = BNX2FC_FCOE_MAC_METHOD_FCF_MAP; + } else { + fc_fcoe_set_mac(fcoe_mac, fh->fh_d_id); + method = BNX2FC_FCOE_MAC_METHOD_FCOE_SET_MAC; } - if (!is_zero_ether_addr(mac)) - fip->update_mac(lport, mac); + + BNX2FC_HBA_DBG(lport, "fcoe_mac=%pM method=%d\n", fcoe_mac, method); + fip->update_mac(lport, fcoe_mac); done: fc_lport_flogi_resp(seq, fp, lport); } diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index a75e74ad1698..7796799bf04a 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -2971,7 +2971,8 @@ static struct scsi_host_template bnx2fc_shost_template = { .this_id = -1, .cmd_per_lun = 3, .sg_tablesize = BNX2FC_MAX_BDS_PER_CMD, - .max_sectors = 1024, + .dma_boundary = 0x7fff, + .max_sectors = 0x3fbf, .track_queue_depth = 1, .slave_configure = bnx2fc_slave_configure, .shost_attrs = bnx2fc_host_attrs, diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 8def63c0755f..9e50e5b53763 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -70,7 +70,7 @@ static void bnx2fc_cmd_timeout(struct work_struct *work) &io_req->req_flags)) { /* Handle eh_abort timeout */ BNX2FC_IO_DBG(io_req, "eh_abort timed out\n"); - complete(&io_req->tm_done); + complete(&io_req->abts_done); } else if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &io_req->req_flags)) { /* Handle internally generated ABTS timeout */ @@ -775,31 +775,32 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags) io_req->on_tmf_queue = 1; list_add_tail(&io_req->link, &tgt->active_tm_queue); - init_completion(&io_req->tm_done); - io_req->wait_for_comp = 1; + init_completion(&io_req->abts_done); + io_req->wait_for_abts_comp = 1; /* Ring doorbell */ bnx2fc_ring_doorbell(tgt); spin_unlock_bh(&tgt->tgt_lock); - rc = wait_for_completion_timeout(&io_req->tm_done, + rc = wait_for_completion_timeout(&io_req->abts_done, interface->tm_timeout * HZ); spin_lock_bh(&tgt->tgt_lock); - io_req->wait_for_comp = 0; + io_req->wait_for_abts_comp = 0; if (!(test_bit(BNX2FC_FLAG_TM_COMPL, &io_req->req_flags))) { set_bit(BNX2FC_FLAG_TM_TIMEOUT, &io_req->req_flags); if (io_req->on_tmf_queue) { list_del_init(&io_req->link); io_req->on_tmf_queue = 0; } - io_req->wait_for_comp = 1; + io_req->wait_for_cleanup_comp = 1; + init_completion(&io_req->cleanup_done); bnx2fc_initiate_cleanup(io_req); spin_unlock_bh(&tgt->tgt_lock); - rc = wait_for_completion_timeout(&io_req->tm_done, + rc = wait_for_completion_timeout(&io_req->cleanup_done, BNX2FC_FW_TIMEOUT); spin_lock_bh(&tgt->tgt_lock); - io_req->wait_for_comp = 0; + io_req->wait_for_cleanup_comp = 0; if (!rc) kref_put(&io_req->refcount, bnx2fc_cmd_release); } @@ -1047,6 +1048,9 @@ int bnx2fc_initiate_cleanup(struct bnx2fc_cmd *io_req) /* Obtain free SQ entry */ bnx2fc_add_2_sq(tgt, xid); + /* Set flag that cleanup request is pending with the firmware */ + set_bit(BNX2FC_FLAG_ISSUE_CLEANUP_REQ, &io_req->req_flags); + /* Ring doorbell */ bnx2fc_ring_doorbell(tgt); @@ -1085,7 +1089,8 @@ static int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req) struct bnx2fc_rport *tgt = io_req->tgt; unsigned int time_left; - io_req->wait_for_comp = 1; + init_completion(&io_req->cleanup_done); + io_req->wait_for_cleanup_comp = 1; bnx2fc_initiate_cleanup(io_req); spin_unlock_bh(&tgt->tgt_lock); @@ -1094,21 +1099,21 @@ static int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req) * Can't wait forever on cleanup response lest we let the SCSI error * handler wait forever */ - time_left = wait_for_completion_timeout(&io_req->tm_done, + time_left = wait_for_completion_timeout(&io_req->cleanup_done, BNX2FC_FW_TIMEOUT); - io_req->wait_for_comp = 0; - if (!time_left) + if (!time_left) { BNX2FC_IO_DBG(io_req, "%s(): Wait for cleanup timed out.\n", __func__); - /* - * Release reference held by SCSI command the cleanup completion - * hits the BNX2FC_CLEANUP case in bnx2fc_process_cq_compl() and - * thus the SCSI command is not returnedi by bnx2fc_scsi_done(). - */ - kref_put(&io_req->refcount, bnx2fc_cmd_release); + /* + * Put the extra reference to the SCSI command since it would + * not have been returned in this case. + */ + kref_put(&io_req->refcount, bnx2fc_cmd_release); + } spin_lock_bh(&tgt->tgt_lock); + io_req->wait_for_cleanup_comp = 0; return SUCCESS; } @@ -1197,7 +1202,8 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd) /* Move IO req to retire queue */ list_add_tail(&io_req->link, &tgt->io_retire_queue); - init_completion(&io_req->tm_done); + init_completion(&io_req->abts_done); + init_completion(&io_req->cleanup_done); if (test_and_set_bit(BNX2FC_FLAG_ISSUE_ABTS, &io_req->req_flags)) { printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) " @@ -1225,26 +1231,28 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd) kref_put(&io_req->refcount, bnx2fc_cmd_release); /* drop timer hold */ set_bit(BNX2FC_FLAG_EH_ABORT, &io_req->req_flags); - io_req->wait_for_comp = 1; + io_req->wait_for_abts_comp = 1; rc = bnx2fc_initiate_abts(io_req); if (rc == FAILED) { + io_req->wait_for_cleanup_comp = 1; bnx2fc_initiate_cleanup(io_req); spin_unlock_bh(&tgt->tgt_lock); - wait_for_completion(&io_req->tm_done); + wait_for_completion(&io_req->cleanup_done); spin_lock_bh(&tgt->tgt_lock); - io_req->wait_for_comp = 0; + io_req->wait_for_cleanup_comp = 0; goto done; } spin_unlock_bh(&tgt->tgt_lock); /* Wait 2 * RA_TOV + 1 to be sure timeout function hasn't fired */ - time_left = wait_for_completion_timeout(&io_req->tm_done, - (2 * rp->r_a_tov + 1) * HZ); + time_left = wait_for_completion_timeout(&io_req->abts_done, + (2 * rp->r_a_tov + 1) * HZ); if (time_left) - BNX2FC_IO_DBG(io_req, "Timed out in eh_abort waiting for tm_done"); + BNX2FC_IO_DBG(io_req, + "Timed out in eh_abort waiting for abts_done"); spin_lock_bh(&tgt->tgt_lock); - io_req->wait_for_comp = 0; + io_req->wait_for_abts_comp = 0; if (test_bit(BNX2FC_FLAG_IO_COMPL, &io_req->req_flags)) { BNX2FC_IO_DBG(io_req, "IO completed in a different context\n"); rc = SUCCESS; @@ -1319,10 +1327,29 @@ void bnx2fc_process_cleanup_compl(struct bnx2fc_cmd *io_req, BNX2FC_IO_DBG(io_req, "Entered process_cleanup_compl " "refcnt = %d, cmd_type = %d\n", kref_read(&io_req->refcount), io_req->cmd_type); + /* + * Test whether there is a cleanup request pending. If not just + * exit. + */ + if (!test_and_clear_bit(BNX2FC_FLAG_ISSUE_CLEANUP_REQ, + &io_req->req_flags)) + return; + /* + * If we receive a cleanup completion for this request then the + * firmware will not give us an abort completion for this request + * so clear any ABTS pending flags. + */ + if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &io_req->req_flags) && + !test_bit(BNX2FC_FLAG_ABTS_DONE, &io_req->req_flags)) { + set_bit(BNX2FC_FLAG_ABTS_DONE, &io_req->req_flags); + if (io_req->wait_for_abts_comp) + complete(&io_req->abts_done); + } + bnx2fc_scsi_done(io_req, DID_ERROR); kref_put(&io_req->refcount, bnx2fc_cmd_release); - if (io_req->wait_for_comp) - complete(&io_req->tm_done); + if (io_req->wait_for_cleanup_comp) + complete(&io_req->cleanup_done); } void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req, @@ -1346,6 +1373,16 @@ void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req, return; } + /* + * If we receive an ABTS completion here then we will not receive + * a cleanup completion so clear any cleanup pending flags. + */ + if (test_bit(BNX2FC_FLAG_ISSUE_CLEANUP_REQ, &io_req->req_flags)) { + clear_bit(BNX2FC_FLAG_ISSUE_CLEANUP_REQ, &io_req->req_flags); + if (io_req->wait_for_cleanup_comp) + complete(&io_req->cleanup_done); + } + /* Do not issue RRQ as this IO is already cleanedup */ if (test_and_set_bit(BNX2FC_FLAG_IO_CLEANUP, &io_req->req_flags)) @@ -1390,10 +1427,10 @@ void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req, bnx2fc_cmd_timer_set(io_req, r_a_tov); io_compl: - if (io_req->wait_for_comp) { + if (io_req->wait_for_abts_comp) { if (test_and_clear_bit(BNX2FC_FLAG_EH_ABORT, &io_req->req_flags)) - complete(&io_req->tm_done); + complete(&io_req->abts_done); } else { /* * We end up here when ABTS is issued as @@ -1577,9 +1614,9 @@ void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req, sc_cmd->scsi_done(sc_cmd); kref_put(&io_req->refcount, bnx2fc_cmd_release); - if (io_req->wait_for_comp) { + if (io_req->wait_for_abts_comp) { BNX2FC_IO_DBG(io_req, "tm_compl - wake up the waiter\n"); - complete(&io_req->tm_done); + complete(&io_req->abts_done); } } @@ -1623,6 +1660,7 @@ static int bnx2fc_map_sg(struct bnx2fc_cmd *io_req) u64 addr; int i; + WARN_ON(scsi_sg_count(sc) > BNX2FC_MAX_BDS_PER_CMD); /* * Use dma_map_sg directly to ensure we're using the correct * dev struct off of pcidev. @@ -1670,6 +1708,16 @@ static int bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req) } io_req->bd_tbl->bd_valid = bd_count; + /* + * Return the command to ML if BD count exceeds the max number + * that can be handled by FW. + */ + if (bd_count > BNX2FC_FW_MAX_BDS_PER_CMD) { + pr_err("bd_count = %d exceeded FW supported max BD(255), task_id = 0x%x\n", + bd_count, io_req->xid); + return -ENOMEM; + } + return 0; } @@ -1926,10 +1974,10 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req, * between command abort and (late) completion. */ BNX2FC_IO_DBG(io_req, "xid not on active_cmd_queue\n"); - if (io_req->wait_for_comp) + if (io_req->wait_for_abts_comp) if (test_and_clear_bit(BNX2FC_FLAG_EH_ABORT, &io_req->req_flags)) - complete(&io_req->tm_done); + complete(&io_req->abts_done); } bnx2fc_unmap_sg_list(io_req); diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c index d735e87e416a..50384b4a817c 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c +++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c @@ -187,7 +187,7 @@ void bnx2fc_flush_active_ios(struct bnx2fc_rport *tgt) /* Handle eh_abort timeout */ BNX2FC_IO_DBG(io_req, "eh_abort for IO " "cleaned up\n"); - complete(&io_req->tm_done); + complete(&io_req->abts_done); } kref_put(&io_req->refcount, bnx2fc_cmd_release); /* drop timer hold */ @@ -210,8 +210,8 @@ void bnx2fc_flush_active_ios(struct bnx2fc_rport *tgt) list_del_init(&io_req->link); io_req->on_tmf_queue = 0; BNX2FC_IO_DBG(io_req, "tm_queue cleanup\n"); - if (io_req->wait_for_comp) - complete(&io_req->tm_done); + if (io_req->wait_for_abts_comp) + complete(&io_req->abts_done); } list_for_each_entry_safe(io_req, tmp, &tgt->els_queue, link) { @@ -251,8 +251,8 @@ void bnx2fc_flush_active_ios(struct bnx2fc_rport *tgt) /* Handle eh_abort timeout */ BNX2FC_IO_DBG(io_req, "eh_abort for IO " "in retire_q\n"); - if (io_req->wait_for_comp) - complete(&io_req->tm_done); + if (io_req->wait_for_abts_comp) + complete(&io_req->abts_done); } kref_put(&io_req->refcount, bnx2fc_cmd_release); } diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c index 66d6e1f4b3c3..da50e87921bc 100644 --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -1665,8 +1665,12 @@ static u8 get_iscsi_dcb_priority(struct net_device *ndev) return 0; if (caps & DCB_CAP_DCBX_VER_IEEE) { - iscsi_dcb_app.selector = IEEE_8021QAZ_APP_SEL_ANY; + iscsi_dcb_app.selector = IEEE_8021QAZ_APP_SEL_STREAM; rv = dcb_ieee_getapp_mask(ndev, &iscsi_dcb_app); + if (!rv) { + iscsi_dcb_app.selector = IEEE_8021QAZ_APP_SEL_ANY; + rv = dcb_ieee_getapp_mask(ndev, &iscsi_dcb_app); + } } else if (caps & DCB_CAP_DCBX_VER_CEE) { iscsi_dcb_app.selector = DCB_APP_IDTYPE_PORTNUM; rv = dcb_getapp(ndev, &iscsi_dcb_app); @@ -2260,7 +2264,8 @@ cxgb4_dcb_change_notify(struct notifier_block *self, unsigned long val, u8 priority; if (iscsi_app->dcbx & DCB_CAP_DCBX_VER_IEEE) { - if (iscsi_app->app.selector != IEEE_8021QAZ_APP_SEL_ANY) + if ((iscsi_app->app.selector != IEEE_8021QAZ_APP_SEL_STREAM) && + (iscsi_app->app.selector != IEEE_8021QAZ_APP_SEL_ANY)) return NOTIFY_DONE; priority = iscsi_app->app.priority; diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c new file mode 100644 index 000000000000..b5e66971b6d9 --- /dev/null +++ b/drivers/scsi/fdomain.c @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Future Domain TMC-16x0 and TMC-3260 SCSI host adapters + * Copyright 2019 Ondrej Zary + * + * Original driver by + * Rickard E. Faith, faith@cs.unc.edu + * + * Future Domain BIOS versions supported for autodetect: + * 2.0, 3.0, 3.2, 3.4 (1.0), 3.5 (2.0), 3.6, 3.61 + * Chips supported: + * TMC-1800, TMC-18C50, TMC-18C30, TMC-36C70 + * Boards supported: + * Future Domain TMC-1650, TMC-1660, TMC-1670, TMC-1680, TMC-1610M/MER/MEX + * Future Domain TMC-3260 (PCI) + * Quantum ISA-200S, ISA-250MG + * Adaptec AHA-2920A (PCI) [BUT *NOT* AHA-2920C -- use aic7xxx instead] + * IBM ? + * + * NOTE: + * + * The Adaptec AHA-2920C has an Adaptec AIC-7850 chip on it. + * Use the aic7xxx driver for this board. + * + * The Adaptec AHA-2920A has a Future Domain chip on it, so this is the right + * driver for that card. Unfortunately, the boxes will probably just say + * "2920", so you'll have to look on the card for a Future Domain logo, or a + * letter after the 2920. + * + * If you have a TMC-8xx or TMC-9xx board, then this is not the driver for + * your board. + * + * DESCRIPTION: + * + * This is the Linux low-level SCSI driver for Future Domain TMC-1660/1680 + * TMC-1650/1670, and TMC-3260 SCSI host adapters. The 1650 and 1670 have a + * 25-pin external connector, whereas the 1660 and 1680 have a SCSI-2 50-pin + * high-density external connector. The 1670 and 1680 have floppy disk + * controllers built in. The TMC-3260 is a PCI bus card. + * + * Future Domain's older boards are based on the TMC-1800 chip, and this + * driver was originally written for a TMC-1680 board with the TMC-1800 chip. + * More recently, boards are being produced with the TMC-18C50 and TMC-18C30 + * chips. + * + * Please note that the drive ordering that Future Domain implemented in BIOS + * versions 3.4 and 3.5 is the opposite of the order (currently) used by the + * rest of the SCSI industry. + * + * + * REFERENCES USED: + * + * "TMC-1800 SCSI Chip Specification (FDC-1800T)", Future Domain Corporation, + * 1990. + * + * "Technical Reference Manual: 18C50 SCSI Host Adapter Chip", Future Domain + * Corporation, January 1992. + * + * "LXT SCSI Products: Specifications and OEM Technical Manual (Revision + * B/September 1991)", Maxtor Corporation, 1991. + * + * "7213S product Manual (Revision P3)", Maxtor Corporation, 1992. + * + * "Draft Proposed American National Standard: Small Computer System + * Interface - 2 (SCSI-2)", Global Engineering Documents. (X3T9.2/86-109, + * revision 10h, October 17, 1991) + * + * Private communications, Drew Eckhardt (drew@cs.colorado.edu) and Eric + * Youngdale (ericy@cais.com), 1992. + * + * Private communication, Tuong Le (Future Domain Engineering department), + * 1994. (Disk geometry computations for Future Domain BIOS version 3.4, and + * TMC-18C30 detection.) + * + * Hogan, Thom. The Programmer's PC Sourcebook. Microsoft Press, 1988. Page + * 60 (2.39: Disk Partition Table Layout). + * + * "18C30 Technical Reference Manual", Future Domain Corporation, 1993, page + * 6-1. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fdomain.h" + +/* + * FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the + * 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by + * the SCSI device, an interrupt will be raised. Therefore, this could be as + * low as 0, or as high as 16. Note, however, that values which are too high + * or too low seem to prevent any interrupts from occurring, and thereby lock + * up the machine. + */ +#define FIFO_COUNT 2 /* Number of 512 byte blocks before INTR */ +#define PARITY_MASK ACTL_PAREN /* Parity enabled, 0 = disabled */ + +enum chip_type { + unknown = 0x00, + tmc1800 = 0x01, + tmc18c50 = 0x02, + tmc18c30 = 0x03, +}; + +struct fdomain { + int base; + struct scsi_cmnd *cur_cmd; + enum chip_type chip; + struct work_struct work; +}; + +static inline void fdomain_make_bus_idle(struct fdomain *fd) +{ + outb(0, fd->base + REG_BCTL); + outb(0, fd->base + REG_MCTL); + if (fd->chip == tmc18c50 || fd->chip == tmc18c30) + /* Clear forced intr. */ + outb(ACTL_RESET | ACTL_CLRFIRQ | PARITY_MASK, + fd->base + REG_ACTL); + else + outb(ACTL_RESET | PARITY_MASK, fd->base + REG_ACTL); +} + +static enum chip_type fdomain_identify(int port) +{ + u16 id = inb(port + REG_ID_LSB) | inb(port + REG_ID_MSB) << 8; + + switch (id) { + case 0x6127: + return tmc1800; + case 0x60e9: /* 18c50 or 18c30 */ + break; + default: + return unknown; + } + + /* Try to toggle 32-bit mode. This only works on an 18c30 chip. */ + outb(CFG2_32BIT, port + REG_CFG2); + if ((inb(port + REG_CFG2) & CFG2_32BIT)) { + outb(0, port + REG_CFG2); + if ((inb(port + REG_CFG2) & CFG2_32BIT) == 0) + return tmc18c30; + } + /* If that failed, we are an 18c50. */ + return tmc18c50; +} + +static int fdomain_test_loopback(int base) +{ + int i; + + for (i = 0; i < 255; i++) { + outb(i, base + REG_LOOPBACK); + if (inb(base + REG_LOOPBACK) != i) + return 1; + } + + return 0; +} + +static void fdomain_reset(int base) +{ + outb(1, base + REG_BCTL); + mdelay(20); + outb(0, base + REG_BCTL); + mdelay(1150); + outb(0, base + REG_MCTL); + outb(PARITY_MASK, base + REG_ACTL); +} + +static int fdomain_select(struct Scsi_Host *sh, int target) +{ + int status; + unsigned long timeout; + struct fdomain *fd = shost_priv(sh); + + outb(BCTL_BUSEN | BCTL_SEL, fd->base + REG_BCTL); + outb(BIT(sh->this_id) | BIT(target), fd->base + REG_SCSI_DATA_NOACK); + + /* Stop arbitration and enable parity */ + outb(PARITY_MASK, fd->base + REG_ACTL); + + timeout = 350; /* 350 msec */ + + do { + status = inb(fd->base + REG_BSTAT); + if (status & BSTAT_BSY) { + /* Enable SCSI Bus */ + /* (on error, should make bus idle with 0) */ + outb(BCTL_BUSEN, fd->base + REG_BCTL); + return 0; + } + mdelay(1); + } while (--timeout); + fdomain_make_bus_idle(fd); + return 1; +} + +static void fdomain_finish_cmd(struct fdomain *fd, int result) +{ + outb(0, fd->base + REG_ICTL); + fdomain_make_bus_idle(fd); + fd->cur_cmd->result = result; + fd->cur_cmd->scsi_done(fd->cur_cmd); + fd->cur_cmd = NULL; +} + +static void fdomain_read_data(struct scsi_cmnd *cmd) +{ + struct fdomain *fd = shost_priv(cmd->device->host); + unsigned char *virt, *ptr; + size_t offset, len; + + while ((len = inw(fd->base + REG_FIFO_COUNT)) > 0) { + offset = scsi_bufflen(cmd) - scsi_get_resid(cmd); + virt = scsi_kmap_atomic_sg(scsi_sglist(cmd), scsi_sg_count(cmd), + &offset, &len); + ptr = virt + offset; + if (len & 1) + *ptr++ = inb(fd->base + REG_FIFO); + if (len > 1) + insw(fd->base + REG_FIFO, ptr, len >> 1); + scsi_set_resid(cmd, scsi_get_resid(cmd) - len); + scsi_kunmap_atomic_sg(virt); + } +} + +static void fdomain_write_data(struct scsi_cmnd *cmd) +{ + struct fdomain *fd = shost_priv(cmd->device->host); + /* 8k FIFO for pre-tmc18c30 chips, 2k FIFO for tmc18c30 */ + int FIFO_Size = fd->chip == tmc18c30 ? 0x800 : 0x2000; + unsigned char *virt, *ptr; + size_t offset, len; + + while ((len = FIFO_Size - inw(fd->base + REG_FIFO_COUNT)) > 512) { + offset = scsi_bufflen(cmd) - scsi_get_resid(cmd); + if (len + offset > scsi_bufflen(cmd)) { + len = scsi_bufflen(cmd) - offset; + if (len == 0) + break; + } + virt = scsi_kmap_atomic_sg(scsi_sglist(cmd), scsi_sg_count(cmd), + &offset, &len); + ptr = virt + offset; + if (len & 1) + outb(*ptr++, fd->base + REG_FIFO); + if (len > 1) + outsw(fd->base + REG_FIFO, ptr, len >> 1); + scsi_set_resid(cmd, scsi_get_resid(cmd) - len); + scsi_kunmap_atomic_sg(virt); + } +} + +static void fdomain_work(struct work_struct *work) +{ + struct fdomain *fd = container_of(work, struct fdomain, work); + struct Scsi_Host *sh = container_of((void *)fd, struct Scsi_Host, + hostdata); + struct scsi_cmnd *cmd = fd->cur_cmd; + unsigned long flags; + int status; + int done = 0; + + spin_lock_irqsave(sh->host_lock, flags); + + if (cmd->SCp.phase & in_arbitration) { + status = inb(fd->base + REG_ASTAT); + if (!(status & ASTAT_ARB)) { + fdomain_finish_cmd(fd, DID_BUS_BUSY << 16); + goto out; + } + cmd->SCp.phase = in_selection; + + outb(ICTL_SEL | FIFO_COUNT, fd->base + REG_ICTL); + outb(BCTL_BUSEN | BCTL_SEL, fd->base + REG_BCTL); + outb(BIT(cmd->device->host->this_id) | BIT(scmd_id(cmd)), + fd->base + REG_SCSI_DATA_NOACK); + /* Stop arbitration and enable parity */ + outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL); + goto out; + } else if (cmd->SCp.phase & in_selection) { + status = inb(fd->base + REG_BSTAT); + if (!(status & BSTAT_BSY)) { + /* Try again, for slow devices */ + if (fdomain_select(cmd->device->host, scmd_id(cmd))) { + fdomain_finish_cmd(fd, DID_NO_CONNECT << 16); + goto out; + } + /* Stop arbitration and enable parity */ + outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL); + } + cmd->SCp.phase = in_other; + outb(ICTL_FIFO | ICTL_REQ | FIFO_COUNT, fd->base + REG_ICTL); + outb(BCTL_BUSEN, fd->base + REG_BCTL); + goto out; + } + + /* cur_cmd->SCp.phase == in_other: this is the body of the routine */ + status = inb(fd->base + REG_BSTAT); + + if (status & BSTAT_REQ) { + switch (status & 0x0e) { + case BSTAT_CMD: /* COMMAND OUT */ + outb(cmd->cmnd[cmd->SCp.sent_command++], + fd->base + REG_SCSI_DATA); + break; + case 0: /* DATA OUT -- tmc18c50/tmc18c30 only */ + if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) { + cmd->SCp.have_data_in = -1; + outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN | + PARITY_MASK, fd->base + REG_ACTL); + } + break; + case BSTAT_IO: /* DATA IN -- tmc18c50/tmc18c30 only */ + if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) { + cmd->SCp.have_data_in = 1; + outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK, + fd->base + REG_ACTL); + } + break; + case BSTAT_CMD | BSTAT_IO: /* STATUS IN */ + cmd->SCp.Status = inb(fd->base + REG_SCSI_DATA); + break; + case BSTAT_MSG | BSTAT_CMD: /* MESSAGE OUT */ + outb(MESSAGE_REJECT, fd->base + REG_SCSI_DATA); + break; + case BSTAT_MSG | BSTAT_IO | BSTAT_CMD: /* MESSAGE IN */ + cmd->SCp.Message = inb(fd->base + REG_SCSI_DATA); + if (!cmd->SCp.Message) + ++done; + break; + } + } + + if (fd->chip == tmc1800 && !cmd->SCp.have_data_in && + cmd->SCp.sent_command >= cmd->cmd_len) { + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + cmd->SCp.have_data_in = -1; + outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN | + PARITY_MASK, fd->base + REG_ACTL); + } else { + cmd->SCp.have_data_in = 1; + outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK, + fd->base + REG_ACTL); + } + } + + if (cmd->SCp.have_data_in == -1) /* DATA OUT */ + fdomain_write_data(cmd); + + if (cmd->SCp.have_data_in == 1) /* DATA IN */ + fdomain_read_data(cmd); + + if (done) { + fdomain_finish_cmd(fd, (cmd->SCp.Status & 0xff) | + ((cmd->SCp.Message & 0xff) << 8) | + (DID_OK << 16)); + } else { + if (cmd->SCp.phase & disconnect) { + outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT, + fd->base + REG_ICTL); + outb(0, fd->base + REG_BCTL); + } else + outb(ICTL_FIFO | ICTL_REQ | FIFO_COUNT, + fd->base + REG_ICTL); + } +out: + spin_unlock_irqrestore(sh->host_lock, flags); +} + +static irqreturn_t fdomain_irq(int irq, void *dev_id) +{ + struct fdomain *fd = dev_id; + + /* Is it our IRQ? */ + if ((inb(fd->base + REG_ASTAT) & ASTAT_IRQ) == 0) + return IRQ_NONE; + + outb(0, fd->base + REG_ICTL); + + /* We usually have one spurious interrupt after each command. */ + if (!fd->cur_cmd) /* Spurious interrupt */ + return IRQ_NONE; + + schedule_work(&fd->work); + + return IRQ_HANDLED; +} + +static int fdomain_queue(struct Scsi_Host *sh, struct scsi_cmnd *cmd) +{ + struct fdomain *fd = shost_priv(cmd->device->host); + unsigned long flags; + + cmd->SCp.Status = 0; + cmd->SCp.Message = 0; + cmd->SCp.have_data_in = 0; + cmd->SCp.sent_command = 0; + cmd->SCp.phase = in_arbitration; + scsi_set_resid(cmd, scsi_bufflen(cmd)); + + spin_lock_irqsave(sh->host_lock, flags); + + fd->cur_cmd = cmd; + + fdomain_make_bus_idle(fd); + + /* Start arbitration */ + outb(0, fd->base + REG_ICTL); + outb(0, fd->base + REG_BCTL); /* Disable data drivers */ + /* Set our id bit */ + outb(BIT(cmd->device->host->this_id), fd->base + REG_SCSI_DATA_NOACK); + outb(ICTL_ARB, fd->base + REG_ICTL); + /* Start arbitration */ + outb(ACTL_ARB | ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL); + + spin_unlock_irqrestore(sh->host_lock, flags); + + return 0; +} + +static int fdomain_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *sh = cmd->device->host; + struct fdomain *fd = shost_priv(sh); + unsigned long flags; + + if (!fd->cur_cmd) + return FAILED; + + spin_lock_irqsave(sh->host_lock, flags); + + fdomain_make_bus_idle(fd); + fd->cur_cmd->SCp.phase |= aborted; + fd->cur_cmd->result = DID_ABORT << 16; + + /* Aborts are not done well. . . */ + fdomain_finish_cmd(fd, DID_ABORT << 16); + spin_unlock_irqrestore(sh->host_lock, flags); + return SUCCESS; +} + +static int fdomain_host_reset(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *sh = cmd->device->host; + struct fdomain *fd = shost_priv(sh); + unsigned long flags; + + spin_lock_irqsave(sh->host_lock, flags); + fdomain_reset(fd->base); + spin_unlock_irqrestore(sh->host_lock, flags); + return SUCCESS; +} + +static int fdomain_biosparam(struct scsi_device *sdev, + struct block_device *bdev, sector_t capacity, + int geom[]) +{ + unsigned char *p = scsi_bios_ptable(bdev); + + if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */ + && p[4]) { /* Partition type */ + geom[0] = p[5] + 1; /* heads */ + geom[1] = p[6] & 0x3f; /* sectors */ + } else { + if (capacity >= 0x7e0000) { + geom[0] = 255; /* heads */ + geom[1] = 63; /* sectors */ + } else if (capacity >= 0x200000) { + geom[0] = 128; /* heads */ + geom[1] = 63; /* sectors */ + } else { + geom[0] = 64; /* heads */ + geom[1] = 32; /* sectors */ + } + } + geom[2] = sector_div(capacity, geom[0] * geom[1]); + kfree(p); + + return 0; +} + +static struct scsi_host_template fdomain_template = { + .module = THIS_MODULE, + .name = "Future Domain TMC-16x0", + .proc_name = "fdomain", + .queuecommand = fdomain_queue, + .eh_abort_handler = fdomain_abort, + .eh_host_reset_handler = fdomain_host_reset, + .bios_param = fdomain_biosparam, + .can_queue = 1, + .this_id = 7, + .sg_tablesize = 64, + .dma_boundary = PAGE_SIZE - 1, +}; + +struct Scsi_Host *fdomain_create(int base, int irq, int this_id, + struct device *dev) +{ + struct Scsi_Host *sh; + struct fdomain *fd; + enum chip_type chip; + static const char * const chip_names[] = { + "Unknown", "TMC-1800", "TMC-18C50", "TMC-18C30" + }; + unsigned long irq_flags = 0; + + chip = fdomain_identify(base); + if (!chip) + return NULL; + + fdomain_reset(base); + + if (fdomain_test_loopback(base)) + return NULL; + + if (!irq) { + dev_err(dev, "card has no IRQ assigned"); + return NULL; + } + + sh = scsi_host_alloc(&fdomain_template, sizeof(struct fdomain)); + if (!sh) + return NULL; + + if (this_id) + sh->this_id = this_id & 0x07; + + sh->irq = irq; + sh->io_port = base; + sh->n_io_port = FDOMAIN_REGION_SIZE; + + fd = shost_priv(sh); + fd->base = base; + fd->chip = chip; + INIT_WORK(&fd->work, fdomain_work); + + if (dev_is_pci(dev) || !strcmp(dev->bus->name, "pcmcia")) + irq_flags = IRQF_SHARED; + + if (request_irq(irq, fdomain_irq, irq_flags, "fdomain", fd)) + goto fail_put; + + shost_printk(KERN_INFO, sh, "%s chip at 0x%x irq %d SCSI ID %d\n", + dev_is_pci(dev) ? "TMC-36C70 (PCI bus)" : chip_names[chip], + base, irq, sh->this_id); + + if (scsi_add_host(sh, dev)) + goto fail_free_irq; + + scsi_scan_host(sh); + + return sh; + +fail_free_irq: + free_irq(irq, fd); +fail_put: + scsi_host_put(sh); + return NULL; +} +EXPORT_SYMBOL_GPL(fdomain_create); + +int fdomain_destroy(struct Scsi_Host *sh) +{ + struct fdomain *fd = shost_priv(sh); + + cancel_work_sync(&fd->work); + scsi_remove_host(sh); + if (sh->irq) + free_irq(sh->irq, fd); + scsi_host_put(sh); + return 0; +} +EXPORT_SYMBOL_GPL(fdomain_destroy); + +#ifdef CONFIG_PM_SLEEP +static int fdomain_resume(struct device *dev) +{ + struct fdomain *fd = shost_priv(dev_get_drvdata(dev)); + + fdomain_reset(fd->base); + return 0; +} + +static SIMPLE_DEV_PM_OPS(fdomain_pm_ops, NULL, fdomain_resume); +#endif /* CONFIG_PM_SLEEP */ + +MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith"); +MODULE_DESCRIPTION("Future Domain TMC-16x0/TMC-3260 SCSI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h new file mode 100644 index 000000000000..6f63fc6b0d12 --- /dev/null +++ b/drivers/scsi/fdomain.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#define FDOMAIN_REGION_SIZE 0x10 +#define FDOMAIN_BIOS_SIZE 0x2000 + +enum { + in_arbitration = 0x02, + in_selection = 0x04, + in_other = 0x08, + disconnect = 0x10, + aborted = 0x20, + sent_ident = 0x40, +}; + +/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */ +#define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */ +#define REG_BSTAT 1 /* R: SCSI Bus Status */ +#define BSTAT_BSY BIT(0) /* Busy */ +#define BSTAT_MSG BIT(1) /* Message */ +#define BSTAT_IO BIT(2) /* Input/Output */ +#define BSTAT_CMD BIT(3) /* Command/Data */ +#define BSTAT_REQ BIT(4) /* Request and Not Ack */ +#define BSTAT_SEL BIT(5) /* Select */ +#define BSTAT_ACK BIT(6) /* Acknowledge and Request */ +#define BSTAT_ATN BIT(7) /* Attention */ +#define REG_BCTL 1 /* W: SCSI Bus Control */ +#define BCTL_RST BIT(0) /* Bus Reset */ +#define BCTL_SEL BIT(1) /* Select */ +#define BCTL_BSY BIT(2) /* Busy */ +#define BCTL_ATN BIT(3) /* Attention */ +#define BCTL_IO BIT(4) /* Input/Output */ +#define BCTL_CMD BIT(5) /* Command/Data */ +#define BCTL_MSG BIT(6) /* Message */ +#define BCTL_BUSEN BIT(7) /* Enable bus drivers */ +#define REG_ASTAT 2 /* R: Adapter Status 1 */ +#define ASTAT_IRQ BIT(0) /* Interrupt active */ +#define ASTAT_ARB BIT(1) /* Arbitration complete */ +#define ASTAT_PARERR BIT(2) /* Parity error */ +#define ASTAT_RST BIT(3) /* SCSI reset occurred */ +#define ASTAT_FIFODIR BIT(4) /* FIFO direction */ +#define ASTAT_FIFOEN BIT(5) /* FIFO enabled */ +#define ASTAT_PAREN BIT(6) /* Parity enabled */ +#define ASTAT_BUSEN BIT(7) /* Bus drivers enabled */ +#define REG_ICTL 2 /* W: Interrupt Control */ +#define ICTL_FIFO_MASK 0x0f /* FIFO threshold, 1/16 FIFO size */ +#define ICTL_FIFO BIT(4) /* Int. on FIFO count */ +#define ICTL_ARB BIT(5) /* Int. on Arbitration complete */ +#define ICTL_SEL BIT(6) /* Int. on SCSI Select */ +#define ICTL_REQ BIT(7) /* Int. on SCSI Request */ +#define REG_FSTAT 3 /* R: Adapter Status 2 (FIFO) - (@) */ +#define FSTAT_ONOTEMPTY BIT(0) /* Output FIFO not empty */ +#define FSTAT_INOTEMPTY BIT(1) /* Input FIFO not empty */ +#define FSTAT_NOTEMPTY BIT(2) /* Main FIFO not empty */ +#define FSTAT_NOTFULL BIT(3) /* Main FIFO not full */ +#define REG_MCTL 3 /* W: SCSI Data Mode Control */ +#define MCTL_ACK_MASK 0x0f /* Acknowledge period */ +#define MCTL_ACTDEASS BIT(4) /* Active deassert of REQ and ACK */ +#define MCTL_TARGET BIT(5) /* Enable target mode */ +#define MCTL_FASTSYNC BIT(6) /* Enable Fast Synchronous */ +#define MCTL_SYNC BIT(7) /* Enable Synchronous */ +#define REG_INTCOND 4 /* R: Interrupt Condition - (@) */ +#define IRQ_FIFO BIT(1) /* FIFO interrupt */ +#define IRQ_REQ BIT(2) /* SCSI Request interrupt */ +#define IRQ_SEL BIT(3) /* SCSI Select interrupt */ +#define IRQ_ARB BIT(4) /* SCSI Arbitration interrupt */ +#define IRQ_RST BIT(5) /* SCSI Reset interrupt */ +#define IRQ_FORCED BIT(6) /* Forced interrupt */ +#define IRQ_TIMEOUT BIT(7) /* Bus timeout */ +#define REG_ACTL 4 /* W: Adapter Control 1 */ +#define ACTL_RESET BIT(0) /* Reset FIFO, parity, reset int. */ +#define ACTL_FIRQ BIT(1) /* Set Forced interrupt */ +#define ACTL_ARB BIT(2) /* Initiate Bus Arbitration */ +#define ACTL_PAREN BIT(3) /* Enable SCSI Parity */ +#define ACTL_IRQEN BIT(4) /* Enable interrupts */ +#define ACTL_CLRFIRQ BIT(5) /* Clear Forced interrupt */ +#define ACTL_FIFOWR BIT(6) /* FIFO Direction (1=write) */ +#define ACTL_FIFOEN BIT(7) /* Enable FIFO */ +#define REG_ID_LSB 5 /* R: ID Code (LSB) */ +#define REG_ACTL2 5 /* Adapter Control 2 - (@) */ +#define ACTL2_RAMOVRLY BIT(0) /* Enable RAM overlay */ +#define ACTL2_SLEEP BIT(7) /* Sleep mode */ +#define REG_ID_MSB 6 /* R: ID Code (MSB) */ +#define REG_LOOPBACK 7 /* R/W: Loopback */ +#define REG_SCSI_DATA_NOACK 8 /* R/W: SCSI Data (no ACK) */ +#define REG_ASTAT3 9 /* R: Adapter Status 3 */ +#define ASTAT3_ACTDEASS BIT(0) /* Active deassert enabled */ +#define ASTAT3_RAMOVRLY BIT(1) /* RAM overlay enabled */ +#define ASTAT3_TARGERR BIT(2) /* Target error */ +#define ASTAT3_IRQEN BIT(3) /* Interrupts enabled */ +#define ASTAT3_IRQMASK 0xf0 /* Enabled interrupts mask */ +#define REG_CFG1 10 /* R: Configuration Register 1 */ +#define CFG1_BUS BIT(0) /* 0 = ISA */ +#define CFG1_IRQ_MASK 0x0e /* IRQ jumpers */ +#define CFG1_IO_MASK 0x30 /* I/O base jumpers */ +#define CFG1_BIOS_MASK 0xc0 /* BIOS base jumpers */ +#define REG_CFG2 11 /* R/W: Configuration Register 2 (@) */ +#define CFG2_ROMDIS BIT(0) /* ROM disabled */ +#define CFG2_RAMDIS BIT(1) /* RAM disabled */ +#define CFG2_IRQEDGE BIT(2) /* Edge-triggered interrupts */ +#define CFG2_NOWS BIT(3) /* No wait states */ +#define CFG2_32BIT BIT(7) /* 32-bit mode */ +#define REG_FIFO 12 /* R/W: FIFO */ +#define REG_FIFO_COUNT 14 /* R: FIFO Data Count */ + +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops fdomain_pm_ops; +#define FDOMAIN_PM_OPS (&fdomain_pm_ops) +#else +#define FDOMAIN_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +struct Scsi_Host *fdomain_create(int base, int irq, int this_id, + struct device *dev); +int fdomain_destroy(struct Scsi_Host *sh); diff --git a/drivers/scsi/fdomain_isa.c b/drivers/scsi/fdomain_isa.c new file mode 100644 index 000000000000..28639adf8219 --- /dev/null +++ b/drivers/scsi/fdomain_isa.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include +#include +#include "fdomain.h" + +#define MAXBOARDS_PARAM 4 +static int io[MAXBOARDS_PARAM] = { 0, 0, 0, 0 }; +module_param_hw_array(io, int, ioport, NULL, 0); +MODULE_PARM_DESC(io, "base I/O address of controller (0x140, 0x150, 0x160, 0x170)"); + +static int irq[MAXBOARDS_PARAM] = { 0, 0, 0, 0 }; +module_param_hw_array(irq, int, irq, NULL, 0); +MODULE_PARM_DESC(irq, "IRQ of controller (0=auto [default])"); + +static int scsi_id[MAXBOARDS_PARAM] = { 0, 0, 0, 0 }; +module_param_hw_array(scsi_id, int, other, NULL, 0); +MODULE_PARM_DESC(scsi_id, "SCSI ID of controller (default = 7)"); + +static unsigned long addresses[] = { + 0xc8000, + 0xca000, + 0xce000, + 0xde000, +}; +#define ADDRESS_COUNT ARRAY_SIZE(addresses) + +static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 }; +#define PORT_COUNT ARRAY_SIZE(ports) + +static unsigned short irqs[] = { 3, 5, 10, 11, 12, 14, 15, 0 }; + +/* This driver works *ONLY* for Future Domain cards using the TMC-1800, + * TMC-18C50, or TMC-18C30 chip. This includes models TMC-1650, 1660, 1670, + * and 1680. These are all 16-bit cards. + * BIOS versions prior to 3.2 assigned SCSI ID 6 to SCSI adapter. + * + * The following BIOS signature signatures are for boards which do *NOT* + * work with this driver (these TMC-8xx and TMC-9xx boards may work with the + * Seagate driver): + * + * FUTURE DOMAIN CORP. (C) 1986-1988 V4.0I 03/16/88 + * FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89 + * FUTURE DOMAIN CORP. (C) 1986-1989 V6.0A7/28/89 + * FUTURE DOMAIN CORP. (C) 1986-1990 V6.0105/31/90 + * FUTURE DOMAIN CORP. (C) 1986-1990 V6.0209/18/90 + * FUTURE DOMAIN CORP. (C) 1986-1990 V7.009/18/90 + * FUTURE DOMAIN CORP. (C) 1992 V8.00.004/02/92 + * + * (The cards which do *NOT* work are all 8-bit cards -- although some of + * them have a 16-bit form-factor, the upper 8-bits are used only for IRQs + * and are *NOT* used for data. You can tell the difference by following + * the tracings on the circuit board -- if only the IRQ lines are involved, + * you have a "8-bit" card, and should *NOT* use this driver.) + */ + +static struct signature { + const char *signature; + int offset; + int length; + int this_id; + int base_offset; +} signatures[] = { +/* 1 2 3 4 5 6 */ +/* 123456789012345678901234567890123456789012345678901234567890 */ +{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 5, 50, 6, 0x1fcc }, +{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V1.07/28/89", 5, 50, 6, 0x1fcc }, +{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 72, 50, 6, 0x1fa2 }, +{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.0", 73, 43, 6, 0x1fa2 }, +{ "FUTURE DOMAIN CORP. (C) 1991 1800-V2.0.", 72, 39, 6, 0x1fa3 }, +{ "FUTURE DOMAIN CORP. (C) 1992 V3.00.004/02/92", 5, 44, 6, 0 }, +{ "FUTURE DOMAIN TMC-18XX (C) 1993 V3.203/12/93", 5, 44, 7, 0 }, +{ "IBM F1 P2 BIOS v1.0011/09/92", 5, 28, 7, 0x1ff3 }, +{ "IBM F1 P2 BIOS v1.0104/29/93", 5, 28, 7, 0 }, +{ "Future Domain Corp. V1.0008/18/93", 5, 33, 7, 0 }, +{ "Future Domain Corp. V2.0108/18/93", 5, 33, 7, 0 }, +{ "FUTURE DOMAIN CORP. V3.5008/18/93", 5, 34, 7, 0 }, +{ "FUTURE DOMAIN 18c30/18c50/1800 (C) 1994 V3.5", 5, 44, 7, 0 }, +{ "FUTURE DOMAIN CORP. V3.6008/18/93", 5, 34, 7, 0 }, +{ "FUTURE DOMAIN CORP. V3.6108/18/93", 5, 34, 7, 0 }, +}; +#define SIGNATURE_COUNT ARRAY_SIZE(signatures) + +static int fdomain_isa_match(struct device *dev, unsigned int ndev) +{ + struct Scsi_Host *sh; + int i, base = 0, irq = 0; + unsigned long bios_base = 0; + struct signature *sig = NULL; + void __iomem *p; + static struct signature *saved_sig; + int this_id = 7; + + if (ndev < ADDRESS_COUNT) { /* scan supported ISA BIOS addresses */ + p = ioremap(addresses[ndev], FDOMAIN_BIOS_SIZE); + if (!p) + return 0; + for (i = 0; i < SIGNATURE_COUNT; i++) + if (check_signature(p + signatures[i].offset, + signatures[i].signature, + signatures[i].length)) + break; + if (i == SIGNATURE_COUNT) /* no signature found */ + goto fail_unmap; + sig = &signatures[i]; + bios_base = addresses[ndev]; + /* read I/O base from BIOS area */ + if (sig->base_offset) + base = readb(p + sig->base_offset) + + (readb(p + sig->base_offset + 1) << 8); + iounmap(p); + if (base) + dev_info(dev, "BIOS at 0x%lx specifies I/O base 0x%x\n", + bios_base, base); + else + dev_info(dev, "BIOS at 0x%lx\n", bios_base); + if (!base) { /* no I/O base in BIOS area */ + /* save BIOS signature for later use in port probing */ + saved_sig = sig; + return 0; + } + } else /* scan supported I/O ports */ + base = ports[ndev - ADDRESS_COUNT]; + + /* use saved BIOS signature if present */ + if (!sig && saved_sig) + sig = saved_sig; + + if (!request_region(base, FDOMAIN_REGION_SIZE, "fdomain_isa")) + return 0; + + irq = irqs[(inb(base + REG_CFG1) & 0x0e) >> 1]; + + + if (sig) + this_id = sig->this_id; + + sh = fdomain_create(base, irq, this_id, dev); + if (!sh) { + release_region(base, FDOMAIN_REGION_SIZE); + return 0; + } + + dev_set_drvdata(dev, sh); + return 1; +fail_unmap: + iounmap(p); + return 0; +} + +static int fdomain_isa_param_match(struct device *dev, unsigned int ndev) +{ + struct Scsi_Host *sh; + int irq_ = irq[ndev]; + + if (!io[ndev]) + return 0; + + if (!request_region(io[ndev], FDOMAIN_REGION_SIZE, "fdomain_isa")) { + dev_err(dev, "base 0x%x already in use", io[ndev]); + return 0; + } + + if (irq_ <= 0) + irq_ = irqs[(inb(io[ndev] + REG_CFG1) & 0x0e) >> 1]; + + sh = fdomain_create(io[ndev], irq_, scsi_id[ndev], dev); + if (!sh) { + dev_err(dev, "controller not found at base 0x%x", io[ndev]); + release_region(io[ndev], FDOMAIN_REGION_SIZE); + return 0; + } + + dev_set_drvdata(dev, sh); + return 1; +} + +static int fdomain_isa_remove(struct device *dev, unsigned int ndev) +{ + struct Scsi_Host *sh = dev_get_drvdata(dev); + int base = sh->io_port; + + fdomain_destroy(sh); + release_region(base, FDOMAIN_REGION_SIZE); + dev_set_drvdata(dev, NULL); + return 0; +} + +static struct isa_driver fdomain_isa_driver = { + .match = fdomain_isa_match, + .remove = fdomain_isa_remove, + .driver = { + .name = "fdomain_isa", + .pm = FDOMAIN_PM_OPS, + }, +}; + +static int __init fdomain_isa_init(void) +{ + int isa_probe_count = ADDRESS_COUNT + PORT_COUNT; + + if (io[0]) { /* use module parameters if present */ + fdomain_isa_driver.match = fdomain_isa_param_match; + isa_probe_count = MAXBOARDS_PARAM; + } + + return isa_register_driver(&fdomain_isa_driver, isa_probe_count); +} + +static void __exit fdomain_isa_exit(void) +{ + isa_unregister_driver(&fdomain_isa_driver); +} + +module_init(fdomain_isa_init); +module_exit(fdomain_isa_exit); + +MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith"); +MODULE_DESCRIPTION("Future Domain TMC-16x0 ISA SCSI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/fdomain_pci.c b/drivers/scsi/fdomain_pci.c new file mode 100644 index 000000000000..3e05ce7b89e5 --- /dev/null +++ b/drivers/scsi/fdomain_pci.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include "fdomain.h" + +static int fdomain_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *d) +{ + int err; + struct Scsi_Host *sh; + + err = pci_enable_device(pdev); + if (err) + goto fail; + + err = pci_request_regions(pdev, "fdomain_pci"); + if (err) + goto disable_device; + + err = -ENODEV; + if (pci_resource_len(pdev, 0) == 0) + goto release_region; + + sh = fdomain_create(pci_resource_start(pdev, 0), pdev->irq, 7, + &pdev->dev); + if (!sh) + goto release_region; + + pci_set_drvdata(pdev, sh); + return 0; + +release_region: + pci_release_regions(pdev); +disable_device: + pci_disable_device(pdev); +fail: + return err; +} + +static void fdomain_pci_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *sh = pci_get_drvdata(pdev); + + fdomain_destroy(sh); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id fdomain_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70) }, + {} +}; +MODULE_DEVICE_TABLE(pci, fdomain_pci_table); + +static struct pci_driver fdomain_pci_driver = { + .name = "fdomain_pci", + .id_table = fdomain_pci_table, + .probe = fdomain_pci_probe, + .remove = fdomain_pci_remove, + .driver.pm = FDOMAIN_PM_OPS, +}; + +module_pci_driver(fdomain_pci_driver); + +MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith"); +MODULE_DESCRIPTION("Future Domain TMC-3260 PCI SCSI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h index 8d9a8fb2dd32..42a02cc47a60 100644 --- a/drivers/scsi/hisi_sas/hisi_sas.h +++ b/drivers/scsi/hisi_sas/hisi_sas.h @@ -61,10 +61,6 @@ #define HISI_SAS_MAX_SMP_RESP_SZ 1028 #define HISI_SAS_MAX_STP_RESP_SZ 28 -#define DEV_IS_EXPANDER(type) \ - ((type == SAS_EDGE_EXPANDER_DEVICE) || \ - (type == SAS_FANOUT_EXPANDER_DEVICE)) - #define HISI_SAS_SATA_PROTOCOL_NONDATA 0x1 #define HISI_SAS_SATA_PROTOCOL_PIO 0x2 #define HISI_SAS_SATA_PROTOCOL_DMA 0x4 @@ -479,12 +475,12 @@ struct hisi_sas_command_table_stp { u8 atapi_cdb[ATAPI_CDB_LEN]; }; -#define HISI_SAS_SGE_PAGE_CNT SG_CHUNK_SIZE +#define HISI_SAS_SGE_PAGE_CNT (124) struct hisi_sas_sge_page { struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT]; } __aligned(16); -#define HISI_SAS_SGE_DIF_PAGE_CNT SG_CHUNK_SIZE +#define HISI_SAS_SGE_DIF_PAGE_CNT HISI_SAS_SGE_PAGE_CNT struct hisi_sas_sge_dif_page { struct hisi_sas_sge sge[HISI_SAS_SGE_DIF_PAGE_CNT]; } __aligned(16); diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 5879771d82b2..cb746cfc2fa8 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -803,7 +803,7 @@ static int hisi_sas_dev_found(struct domain_device *device) device->lldd_dev = sas_dev; hisi_hba->hw->setup_itct(hisi_hba, sas_dev); - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { + if (parent_dev && dev_is_expander(parent_dev->dev_type)) { int phy_no; u8 phy_num = parent_dev->ex_dev.num_phys; struct ex_phy *phy; @@ -1446,7 +1446,7 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state, _sas_port = sas_port; - if (DEV_IS_EXPANDER(dev->dev_type)) + if (dev_is_expander(dev->dev_type)) sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); } @@ -1533,7 +1533,7 @@ static void hisi_sas_terminate_stp_reject(struct hisi_hba *hisi_hba) struct domain_device *port_dev = sas_port->port_dev; struct domain_device *device; - if (!port_dev || !DEV_IS_EXPANDER(port_dev->dev_type)) + if (!port_dev || !dev_is_expander(port_dev->dev_type)) continue; /* Try to find a SATA device */ @@ -1903,7 +1903,7 @@ static int hisi_sas_clear_nexus_ha(struct sas_ha_struct *sas_ha) struct domain_device *device = sas_dev->sas_device; if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device || - DEV_IS_EXPANDER(device->dev_type)) + dev_is_expander(device->dev_type)) continue; rc = hisi_sas_debug_I_T_nexus_reset(device); @@ -2475,6 +2475,14 @@ EXPORT_SYMBOL_GPL(hisi_sas_alloc); void hisi_sas_free(struct hisi_hba *hisi_hba) { + int i; + + for (i = 0; i < hisi_hba->n_phy; i++) { + struct hisi_sas_phy *phy = &hisi_hba->phy[i]; + + del_timer_sync(&phy->timer); + } + if (hisi_hba->wq) destroy_workqueue(hisi_hba->wq); } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index d99086ef6244..e9b15d45f98f 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -422,70 +422,70 @@ static const struct hisi_sas_hw_error one_bit_ecc_errors[] = { .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF), .msk = HGC_DQE_ECC_1B_ADDR_MSK, .shift = HGC_DQE_ECC_1B_ADDR_OFF, - .msg = "hgc_dqe_acc1b_intr found: Ram address is 0x%08X\n", + .msg = "hgc_dqe_ecc1b_intr", .reg = HGC_DQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF), .msk = HGC_IOST_ECC_1B_ADDR_MSK, .shift = HGC_IOST_ECC_1B_ADDR_OFF, - .msg = "hgc_iost_acc1b_intr found: Ram address is 0x%08X\n", + .msg = "hgc_iost_ecc1b_intr", .reg = HGC_IOST_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF), .msk = HGC_ITCT_ECC_1B_ADDR_MSK, .shift = HGC_ITCT_ECC_1B_ADDR_OFF, - .msg = "hgc_itct_acc1b_intr found: am address is 0x%08X\n", + .msg = "hgc_itct_ecc1b_intr", .reg = HGC_ITCT_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF), .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF, - .msg = "hgc_iostl_acc1b_intr found: memory address is 0x%08X\n", + .msg = "hgc_iostl_ecc1b_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF), .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF, - .msg = "hgc_itctl_acc1b_intr found: memory address is 0x%08X\n", + .msg = "hgc_itctl_ecc1b_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF), .msk = HGC_CQE_ECC_1B_ADDR_MSK, .shift = HGC_CQE_ECC_1B_ADDR_OFF, - .msg = "hgc_cqe_acc1b_intr found: Ram address is 0x%08X\n", + .msg = "hgc_cqe_ecc1b_intr", .reg = HGC_CQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF, - .msg = "rxm_mem0_acc1b_intr found: memory address is 0x%08X\n", + .msg = "rxm_mem0_ecc1b_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF, - .msg = "rxm_mem1_acc1b_intr found: memory address is 0x%08X\n", + .msg = "rxm_mem1_ecc1b_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF, - .msg = "rxm_mem2_acc1b_intr found: memory address is 0x%08X\n", + .msg = "rxm_mem2_ecc1b_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF), .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK, .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF, - .msg = "rxm_mem3_acc1b_intr found: memory address is 0x%08X\n", + .msg = "rxm_mem3_ecc1b_intr", .reg = HGC_RXM_DFX_STATUS15, }, }; @@ -495,70 +495,70 @@ static const struct hisi_sas_hw_error multi_bit_ecc_errors[] = { .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF), .msk = HGC_DQE_ECC_MB_ADDR_MSK, .shift = HGC_DQE_ECC_MB_ADDR_OFF, - .msg = "hgc_dqe_accbad_intr (0x%x) found: Ram address is 0x%08X\n", + .msg = "hgc_dqe_eccbad_intr", .reg = HGC_DQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF), .msk = HGC_IOST_ECC_MB_ADDR_MSK, .shift = HGC_IOST_ECC_MB_ADDR_OFF, - .msg = "hgc_iost_accbad_intr (0x%x) found: Ram address is 0x%08X\n", + .msg = "hgc_iost_eccbad_intr", .reg = HGC_IOST_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF), .msk = HGC_ITCT_ECC_MB_ADDR_MSK, .shift = HGC_ITCT_ECC_MB_ADDR_OFF, - .msg = "hgc_itct_accbad_intr (0x%x) found: Ram address is 0x%08X\n", + .msg = "hgc_itct_eccbad_intr", .reg = HGC_ITCT_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF), .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF, - .msg = "hgc_iostl_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "hgc_iostl_eccbad_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF), .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF, - .msg = "hgc_itctl_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "hgc_itctl_eccbad_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF), .msk = HGC_CQE_ECC_MB_ADDR_MSK, .shift = HGC_CQE_ECC_MB_ADDR_OFF, - .msg = "hgc_cqe_accbad_intr (0x%x) found: Ram address is 0x%08X\n", + .msg = "hgc_cqe_eccbad_intr", .reg = HGC_CQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF, - .msg = "rxm_mem0_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "rxm_mem0_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF, - .msg = "rxm_mem1_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "rxm_mem1_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF, - .msg = "rxm_mem2_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "rxm_mem2_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK, .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF, - .msg = "rxm_mem3_accbad_intr (0x%x) found: memory address is 0x%08X\n", + .msg = "rxm_mem3_eccbad_intr", .reg = HGC_RXM_DFX_STATUS15, }, }; @@ -944,7 +944,7 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba, break; case SAS_SATA_DEV: case SAS_SATA_PENDING: - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF; else qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF; @@ -2526,7 +2526,7 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba, /* create header */ /* dw0 */ dw0 = port->id << CMD_HDR_PORT_OFF; - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) dw0 |= 3 << CMD_HDR_CMD_OFF; else dw0 |= 4 << CMD_HDR_CMD_OFF; @@ -2973,7 +2973,8 @@ one_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, u32 irq_value) val = hisi_sas_read32(hisi_hba, ecc_error->reg); val &= ecc_error->msk; val >>= ecc_error->shift; - dev_warn(dev, ecc_error->msg, val); + dev_warn(dev, "%s found: mem addr is 0x%08X\n", + ecc_error->msg, val); } } } @@ -2992,7 +2993,8 @@ static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, val = hisi_sas_read32(hisi_hba, ecc_error->reg); val &= ecc_error->msk; val >>= ecc_error->shift; - dev_err(dev, ecc_error->msg, irq_value, val); + dev_err(dev, "%s (0x%x) found: mem addr is 0x%08X\n", + ecc_error->msg, irq_value, val); queue_work(hisi_hba->wq, &hisi_hba->rst_work); } } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 0efd55baacd3..5f0f6df11adf 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -23,6 +23,7 @@ #define ITCT_CLR_EN_MSK (0x1 << ITCT_CLR_EN_OFF) #define ITCT_DEV_OFF 0 #define ITCT_DEV_MSK (0x7ff << ITCT_DEV_OFF) +#define SAS_AXI_USER3 0x50 #define IO_SATA_BROKEN_MSG_ADDR_LO 0x58 #define IO_SATA_BROKEN_MSG_ADDR_HI 0x5c #define SATA_INITI_D2H_STORE_ADDR_LO 0x60 @@ -549,6 +550,7 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba) /* Global registers init */ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, (u32)((1ULL << hisi_hba->queue_count) - 1)); + hisi_sas_write32(hisi_hba, SAS_AXI_USER3, 0); hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff0400); hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108); hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1); @@ -752,7 +754,7 @@ static void setup_itct_v3_hw(struct hisi_hba *hisi_hba, break; case SAS_SATA_DEV: case SAS_SATA_PENDING: - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF; else qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF; @@ -906,8 +908,14 @@ static void enable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) { u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + u32 irq_msk = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2_MSK); + static const u32 msk = BIT(CHL_INT2_RX_DISP_ERR_OFF) | + BIT(CHL_INT2_RX_CODE_ERR_OFF) | + BIT(CHL_INT2_RX_INVLD_DW_OFF); u32 state; + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2_MSK, msk | irq_msk); + cfg &= ~PHY_CFG_ENA_MSK; hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); @@ -918,6 +926,15 @@ static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) cfg |= PHY_CFG_PHY_RST_MSK; hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); } + + udelay(1); + + hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW); + hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DISP_ERR); + hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_CODE_ERR); + + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2, msk); + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2_MSK, irq_msk); } static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) @@ -1336,10 +1353,10 @@ static void prep_ata_v3_hw(struct hisi_hba *hisi_hba, u32 dw1 = 0, dw2 = 0; hdr->dw0 = cpu_to_le32(port->id << CMD_HDR_PORT_OFF); - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) hdr->dw0 |= cpu_to_le32(3 << CMD_HDR_CMD_OFF); else - hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF); + hdr->dw0 |= cpu_to_le32(4U << CMD_HDR_CMD_OFF); switch (task->data_dir) { case DMA_TO_DEVICE: @@ -1407,7 +1424,7 @@ static void prep_abort_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_port *port = slot->port; /* dw0 */ - hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/ + hdr->dw0 = cpu_to_le32((5U << CMD_HDR_CMD_OFF) | /*abort*/ (port->id << CMD_HDR_PORT_OFF) | (dev_is_sata(dev) << CMD_HDR_ABORT_DEVICE_TYPE_OFF) | @@ -1826,77 +1843,77 @@ static const struct hisi_sas_hw_error multi_bit_ecc_errors[] = { .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF), .msk = HGC_DQE_ECC_MB_ADDR_MSK, .shift = HGC_DQE_ECC_MB_ADDR_OFF, - .msg = "hgc_dqe_eccbad_intr found: ram addr is 0x%08X\n", + .msg = "hgc_dqe_eccbad_intr", .reg = HGC_DQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF), .msk = HGC_IOST_ECC_MB_ADDR_MSK, .shift = HGC_IOST_ECC_MB_ADDR_OFF, - .msg = "hgc_iost_eccbad_intr found: ram addr is 0x%08X\n", + .msg = "hgc_iost_eccbad_intr", .reg = HGC_IOST_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF), .msk = HGC_ITCT_ECC_MB_ADDR_MSK, .shift = HGC_ITCT_ECC_MB_ADDR_OFF, - .msg = "hgc_itct_eccbad_intr found: ram addr is 0x%08X\n", + .msg = "hgc_itct_eccbad_intr", .reg = HGC_ITCT_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF), .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF, - .msg = "hgc_iostl_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "hgc_iostl_eccbad_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF), .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK, .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF, - .msg = "hgc_itctl_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "hgc_itctl_eccbad_intr", .reg = HGC_LM_DFX_STATUS2, }, { .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF), .msk = HGC_CQE_ECC_MB_ADDR_MSK, .shift = HGC_CQE_ECC_MB_ADDR_OFF, - .msg = "hgc_cqe_eccbad_intr found: ram address is 0x%08X\n", + .msg = "hgc_cqe_eccbad_intr", .reg = HGC_CQE_ECC_ADDR, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF, - .msg = "rxm_mem0_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "rxm_mem0_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF, - .msg = "rxm_mem1_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "rxm_mem1_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK, .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF, - .msg = "rxm_mem2_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "rxm_mem2_eccbad_intr", .reg = HGC_RXM_DFX_STATUS14, }, { .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF), .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK, .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF, - .msg = "rxm_mem3_eccbad_intr found: mem addr is 0x%08X\n", + .msg = "rxm_mem3_eccbad_intr", .reg = HGC_RXM_DFX_STATUS15, }, { .irq_msk = BIT(SAS_ECC_INTR_OOO_RAM_ECC_MB_OFF), .msk = AM_ROB_ECC_ERR_ADDR_MSK, .shift = AM_ROB_ECC_ERR_ADDR_OFF, - .msg = "ooo_ram_eccbad_intr found: ROB_ECC_ERR_ADDR=0x%08X\n", + .msg = "ooo_ram_eccbad_intr", .reg = AM_ROB_ECC_ERR_ADDR, }, }; @@ -1915,7 +1932,8 @@ static void multi_bit_ecc_error_process_v3_hw(struct hisi_hba *hisi_hba, val = hisi_sas_read32(hisi_hba, ecc_error->reg); val &= ecc_error->msk; val >>= ecc_error->shift; - dev_err(dev, ecc_error->msg, irq_value, val); + dev_err(dev, "%s (0x%x) found: mem addr is 0x%08X\n", + ecc_error->msg, irq_value, val); queue_work(hisi_hba->wq, &hisi_hba->rst_work); } } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index ffd7e9506570..43a6b5350775 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -60,7 +60,7 @@ * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' * with an optional trailing '-' followed by a byte value (0-255). */ -#define HPSA_DRIVER_VERSION "3.4.20-160" +#define HPSA_DRIVER_VERSION "3.4.20-170" #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" #define HPSA "hpsa" @@ -73,6 +73,8 @@ /*define how many times we will try a command because of bus resets */ #define MAX_CMD_RETRIES 3 +/* How long to wait before giving up on a command */ +#define HPSA_EH_PTRAID_TIMEOUT (240 * HZ) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); @@ -344,11 +346,6 @@ static inline bool hpsa_is_cmd_idle(struct CommandList *c) return c->scsi_cmd == SCSI_CMD_IDLE; } -static inline bool hpsa_is_pending_event(struct CommandList *c) -{ - return c->reset_pending; -} - /* extract sense key, asc, and ascq from sense data. -1 means invalid. */ static void decode_sense_data(const u8 *sense_data, int sense_data_len, u8 *sense_key, u8 *asc, u8 *ascq) @@ -1144,6 +1141,8 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h, { dial_down_lockup_detection_during_fw_flash(h, c); atomic_inc(&h->commands_outstanding); + if (c->device) + atomic_inc(&c->device->commands_outstanding); reply_queue = h->reply_map[raw_smp_processor_id()]; switch (c->cmd_type) { @@ -1167,9 +1166,6 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h, static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c) { - if (unlikely(hpsa_is_pending_event(c))) - return finish_cmd(c); - __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE); } @@ -1842,25 +1838,33 @@ static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h, return count; } +#define NUM_WAIT 20 static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) { int cmds = 0; int waits = 0; + int num_wait = NUM_WAIT; + + if (device->external) + num_wait = HPSA_EH_PTRAID_TIMEOUT; while (1) { cmds = hpsa_find_outstanding_commands_for_dev(h, device); if (cmds == 0) break; - if (++waits > 20) + if (++waits > num_wait) break; msleep(1000); } - if (waits > 20) + if (waits > num_wait) { dev_warn(&h->pdev->dev, - "%s: removing device with %d outstanding commands!\n", - __func__, cmds); + "%s: removing device [%d:%d:%d:%d] with %d outstanding commands!\n", + __func__, + h->scsi_host->host_no, + device->bus, device->target, device->lun, cmds); + } } static void hpsa_remove_device(struct ctlr_info *h, @@ -2131,11 +2135,16 @@ static int hpsa_slave_configure(struct scsi_device *sdev) sdev->no_uld_attach = !sd || !sd->expose_device; if (sd) { - if (sd->external) + sd->was_removed = 0; + if (sd->external) { queue_depth = EXTERNAL_QD; - else + sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT; + blk_queue_rq_timeout(sdev->request_queue, + HPSA_EH_PTRAID_TIMEOUT); + } else { queue_depth = sd->queue_depth != 0 ? sd->queue_depth : sdev->host->can_queue; + } } else queue_depth = sdev->host->can_queue; @@ -2146,7 +2155,12 @@ static int hpsa_slave_configure(struct scsi_device *sdev) static void hpsa_slave_destroy(struct scsi_device *sdev) { - /* nothing to do. */ + struct hpsa_scsi_dev_t *hdev = NULL; + + hdev = sdev->hostdata; + + if (hdev) + hdev->was_removed = 1; } static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h) @@ -2414,13 +2428,16 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h, break; } + if (dev->in_reset) + retry = 0; + return retry; /* retry on raid path? */ } static void hpsa_cmd_resolve_events(struct ctlr_info *h, struct CommandList *c) { - bool do_wake = false; + struct hpsa_scsi_dev_t *dev = c->device; /* * Reset c->scsi_cmd here so that the reset handler will know @@ -2429,25 +2446,12 @@ static void hpsa_cmd_resolve_events(struct ctlr_info *h, */ c->scsi_cmd = SCSI_CMD_IDLE; mb(); /* Declare command idle before checking for pending events. */ - if (c->reset_pending) { - unsigned long flags; - struct hpsa_scsi_dev_t *dev; - - /* - * There appears to be a reset pending; lock the lock and - * reconfirm. If so, then decrement the count of outstanding - * commands and wake the reset command if this is the last one. - */ - spin_lock_irqsave(&h->lock, flags); - dev = c->reset_pending; /* Re-fetch under the lock. */ - if (dev && atomic_dec_and_test(&dev->reset_cmds_out)) - do_wake = true; - c->reset_pending = NULL; - spin_unlock_irqrestore(&h->lock, flags); + if (dev) { + atomic_dec(&dev->commands_outstanding); + if (dev->in_reset && + atomic_read(&dev->commands_outstanding) <= 0) + wake_up_all(&h->event_sync_wait_queue); } - - if (do_wake) - wake_up_all(&h->event_sync_wait_queue); } static void hpsa_cmd_resolve_and_free(struct ctlr_info *h, @@ -2496,6 +2500,11 @@ static void process_ioaccel2_completion(struct ctlr_info *h, dev->offload_to_be_enabled = 0; } + if (dev->in_reset) { + cmd->result = DID_RESET << 16; + return hpsa_cmd_free_and_done(h, c, cmd); + } + return hpsa_retry_cmd(h, c); } @@ -2574,6 +2583,12 @@ static void complete_scsi_command(struct CommandList *cp) cmd->result = (DID_OK << 16); /* host byte */ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + /* SCSI command has already been cleaned up in SML */ + if (dev->was_removed) { + hpsa_cmd_resolve_and_free(h, cp); + return; + } + if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) { if (dev->physical_device && dev->expose_device && dev->removed) { @@ -2595,10 +2610,6 @@ static void complete_scsi_command(struct CommandList *cp) return hpsa_cmd_free_and_done(h, cp, cmd); } - if ((unlikely(hpsa_is_pending_event(cp)))) - if (cp->reset_pending) - return hpsa_cmd_free_and_done(h, cp, cmd); - if (cp->cmd_type == CMD_IOACCEL2) return process_ioaccel2_completion(h, cp, cmd, dev); @@ -3048,7 +3059,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, return rc; } -static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, +static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, u8 reset_type, int reply_queue) { int rc = IO_OK; @@ -3056,11 +3067,10 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, struct ErrorInfo *ei; c = cmd_alloc(h); - + c->device = dev; /* fill_cmd can't fail here, no data buffer to map. */ - (void) fill_cmd(c, reset_type, h, NULL, 0, 0, - scsi3addr, TYPE_MSG); + (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG); rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); if (rc) { dev_warn(&h->pdev->dev, "Failed to send reset command\n"); @@ -3138,9 +3148,8 @@ static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, } static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, - unsigned char *scsi3addr, u8 reset_type, int reply_queue) + u8 reset_type, int reply_queue) { - int i; int rc = 0; /* We can really only handle one reset at a time */ @@ -3149,38 +3158,14 @@ static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, return -EINTR; } - BUG_ON(atomic_read(&dev->reset_cmds_out) != 0); - - for (i = 0; i < h->nr_cmds; i++) { - struct CommandList *c = h->cmd_pool + i; - int refcount = atomic_inc_return(&c->refcount); - - if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, scsi3addr)) { - unsigned long flags; - - /* - * Mark the target command as having a reset pending, - * then lock a lock so that the command cannot complete - * while we're considering it. If the command is not - * idle then count it; otherwise revoke the event. - */ - c->reset_pending = dev; - spin_lock_irqsave(&h->lock, flags); /* Implied MB */ - if (!hpsa_is_cmd_idle(c)) - atomic_inc(&dev->reset_cmds_out); - else - c->reset_pending = NULL; - spin_unlock_irqrestore(&h->lock, flags); - } - - cmd_free(h, c); - } - - rc = hpsa_send_reset(h, scsi3addr, reset_type, reply_queue); - if (!rc) + rc = hpsa_send_reset(h, dev, reset_type, reply_queue); + if (!rc) { + /* incremented by sending the reset request */ + atomic_dec(&dev->commands_outstanding); wait_event(h->event_sync_wait_queue, - atomic_read(&dev->reset_cmds_out) == 0 || + atomic_read(&dev->commands_outstanding) <= 0 || lockup_detected(h)); + } if (unlikely(lockup_detected(h))) { dev_warn(&h->pdev->dev, @@ -3188,10 +3173,8 @@ static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, rc = -ENODEV; } - if (unlikely(rc)) - atomic_set(&dev->reset_cmds_out, 0); - else - rc = wait_for_device_to_become_ready(h, scsi3addr, 0); + if (!rc) + rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0); mutex_unlock(&h->reset_mutex); return rc; @@ -4820,6 +4803,9 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h, c->phys_disk = dev; + if (dev->in_reset) + return -1; + return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle, cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev); } @@ -5010,6 +4996,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, } else cp->sg_count = (u8) use_sg; + if (phys_disk->in_reset) { + cmd->result = DID_RESET << 16; + return -1; + } + enqueue_cmd_and_start_io(h, c); return 0; } @@ -5027,6 +5018,9 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, if (!c->scsi_cmd->device->hostdata) return -1; + if (phys_disk->in_reset) + return -1; + /* Try to honor the device's queue depth */ if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) > phys_disk->queue_depth) { @@ -5110,6 +5104,9 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, if (!dev) return -1; + if (dev->in_reset) + return -1; + /* check for valid opcode, get LBA and block count */ switch (cmd->cmnd[0]) { case WRITE_6: @@ -5414,13 +5411,13 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, */ static int hpsa_ciss_submit(struct ctlr_info *h, struct CommandList *c, struct scsi_cmnd *cmd, - unsigned char scsi3addr[]) + struct hpsa_scsi_dev_t *dev) { cmd->host_scribble = (unsigned char *) c; c->cmd_type = CMD_SCSI; c->scsi_cmd = cmd; c->Header.ReplyQueue = 0; /* unused in simple mode */ - memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); + memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8); c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT)); /* Fill in the request block... */ @@ -5471,6 +5468,12 @@ static int hpsa_ciss_submit(struct ctlr_info *h, hpsa_cmd_resolve_and_free(h, c); return SCSI_MLQUEUE_HOST_BUSY; } + + if (dev->in_reset) { + hpsa_cmd_resolve_and_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + enqueue_cmd_and_start_io(h, c); /* the cmd'll come back via intr handler in complete_scsi_command() */ return 0; @@ -5522,8 +5525,7 @@ static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index, } static int hpsa_ioaccel_submit(struct ctlr_info *h, - struct CommandList *c, struct scsi_cmnd *cmd, - unsigned char *scsi3addr) + struct CommandList *c, struct scsi_cmnd *cmd) { struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; int rc = IO_ACCEL_INELIGIBLE; @@ -5531,6 +5533,12 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h, if (!dev) return SCSI_MLQUEUE_HOST_BUSY; + if (dev->in_reset) + return SCSI_MLQUEUE_HOST_BUSY; + + if (hpsa_simple_mode) + return IO_ACCEL_INELIGIBLE; + cmd->host_scribble = (unsigned char *) c; if (dev->offload_enabled) { @@ -5563,8 +5571,12 @@ static void hpsa_command_resubmit_worker(struct work_struct *work) cmd->result = DID_NO_CONNECT << 16; return hpsa_cmd_free_and_done(c->h, c, cmd); } - if (c->reset_pending) + + if (dev->in_reset) { + cmd->result = DID_RESET << 16; return hpsa_cmd_free_and_done(c->h, c, cmd); + } + if (c->cmd_type == CMD_IOACCEL2) { struct ctlr_info *h = c->h; struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; @@ -5572,7 +5584,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work) if (c2->error_data.serv_response == IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) { - rc = hpsa_ioaccel_submit(h, c, cmd, dev->scsi3addr); + rc = hpsa_ioaccel_submit(h, c, cmd); if (rc == 0) return; if (rc == SCSI_MLQUEUE_HOST_BUSY) { @@ -5588,7 +5600,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work) } } hpsa_cmd_partial_init(c->h, c->cmdindex, c); - if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) { + if (hpsa_ciss_submit(c->h, c, cmd, dev)) { /* * If we get here, it means dma mapping failed. Try * again via scsi mid layer, which will then get @@ -5607,7 +5619,6 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) { struct ctlr_info *h; struct hpsa_scsi_dev_t *dev; - unsigned char scsi3addr[8]; struct CommandList *c; int rc = 0; @@ -5629,14 +5640,18 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) return 0; } - memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); - if (unlikely(lockup_detected(h))) { cmd->result = DID_NO_CONNECT << 16; cmd->scsi_done(cmd); return 0; } + + if (dev->in_reset) + return SCSI_MLQUEUE_DEVICE_BUSY; + c = cmd_tagged_alloc(h, cmd); + if (c == NULL) + return SCSI_MLQUEUE_DEVICE_BUSY; /* * Call alternate submit routine for I/O accelerated commands. @@ -5645,7 +5660,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) if (likely(cmd->retries == 0 && !blk_rq_is_passthrough(cmd->request) && h->acciopath_status)) { - rc = hpsa_ioaccel_submit(h, c, cmd, scsi3addr); + rc = hpsa_ioaccel_submit(h, c, cmd); if (rc == 0) return 0; if (rc == SCSI_MLQUEUE_HOST_BUSY) { @@ -5653,7 +5668,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) return SCSI_MLQUEUE_HOST_BUSY; } } - return hpsa_ciss_submit(h, c, cmd, scsi3addr); + return hpsa_ciss_submit(h, c, cmd, dev); } static void hpsa_scan_complete(struct ctlr_info *h) @@ -5935,8 +5950,9 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) { int rc = SUCCESS; + int i; struct ctlr_info *h; - struct hpsa_scsi_dev_t *dev; + struct hpsa_scsi_dev_t *dev = NULL; u8 reset_type; char msg[48]; unsigned long flags; @@ -6002,9 +6018,19 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical "); hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); + /* + * wait to see if any commands will complete before sending reset + */ + dev->in_reset = true; /* block any new cmds from OS for this device */ + for (i = 0; i < 10; i++) { + if (atomic_read(&dev->commands_outstanding) > 0) + msleep(1000); + else + break; + } + /* send a reset to the SCSI LUN which the command was sent to */ - rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type, - DEFAULT_REPLY_QUEUE); + rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE); if (rc == 0) rc = SUCCESS; else @@ -6018,6 +6044,8 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return_reset_status: spin_lock_irqsave(&h->reset_lock, flags); h->reset_in_progress = 0; + if (dev) + dev->in_reset = false; spin_unlock_irqrestore(&h->reset_lock, flags); return rc; } @@ -6043,7 +6071,6 @@ static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, BUG(); } - atomic_inc(&c->refcount); if (unlikely(!hpsa_is_cmd_idle(c))) { /* * We expect that the SCSI layer will hand us a unique tag @@ -6051,14 +6078,20 @@ static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, * two requests...because if the selected command isn't idle * then someone is going to be very disappointed. */ - dev_err(&h->pdev->dev, - "tag collision (tag=%d) in cmd_tagged_alloc().\n", - idx); - if (c->scsi_cmd != NULL) - scsi_print_command(c->scsi_cmd); - scsi_print_command(scmd); + if (idx != h->last_collision_tag) { /* Print once per tag */ + dev_warn(&h->pdev->dev, + "%s: tag collision (tag=%d)\n", __func__, idx); + if (c->scsi_cmd != NULL) + scsi_print_command(c->scsi_cmd); + if (scmd) + scsi_print_command(scmd); + h->last_collision_tag = idx; + } + return NULL; } + atomic_inc(&c->refcount); + hpsa_cmd_partial_init(h, idx, c); return c; } @@ -6126,6 +6159,7 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h) break; /* it's ours now. */ } hpsa_cmd_partial_init(h, i, c); + c->device = NULL; return c; } @@ -6579,8 +6613,7 @@ static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd, } } -static void hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr, - u8 reset_type) +static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type) { struct CommandList *c; @@ -7983,10 +8016,15 @@ static int hpsa_alloc_cmd_pool(struct ctlr_info *h) static void hpsa_free_irqs(struct ctlr_info *h) { int i; + int irq_vector = 0; + + if (hpsa_simple_mode) + irq_vector = h->intr_mode; if (!h->msix_vectors || h->intr_mode != PERF_MODE_INT) { /* Single reply queue, only one irq to free */ - free_irq(pci_irq_vector(h->pdev, 0), &h->q[h->intr_mode]); + free_irq(pci_irq_vector(h->pdev, irq_vector), + &h->q[h->intr_mode]); h->q[h->intr_mode] = 0; return; } @@ -8005,6 +8043,10 @@ static int hpsa_request_irqs(struct ctlr_info *h, irqreturn_t (*intxhandler)(int, void *)) { int rc, i; + int irq_vector = 0; + + if (hpsa_simple_mode) + irq_vector = h->intr_mode; /* * initialize h->q[x] = x so that interrupt handlers know which @@ -8040,14 +8082,14 @@ static int hpsa_request_irqs(struct ctlr_info *h, if (h->msix_vectors > 0 || h->pdev->msi_enabled) { sprintf(h->intrname[0], "%s-msi%s", h->devname, h->msix_vectors ? "x" : ""); - rc = request_irq(pci_irq_vector(h->pdev, 0), + rc = request_irq(pci_irq_vector(h->pdev, irq_vector), msixhandler, 0, h->intrname[0], &h->q[h->intr_mode]); } else { sprintf(h->intrname[h->intr_mode], "%s-intx", h->devname); - rc = request_irq(pci_irq_vector(h->pdev, 0), + rc = request_irq(pci_irq_vector(h->pdev, irq_vector), intxhandler, IRQF_SHARED, h->intrname[0], &h->q[h->intr_mode]); @@ -8055,7 +8097,7 @@ static int hpsa_request_irqs(struct ctlr_info *h, } if (rc) { dev_err(&h->pdev->dev, "failed to get irq %d for %s\n", - pci_irq_vector(h->pdev, 0), h->devname); + pci_irq_vector(h->pdev, irq_vector), h->devname); hpsa_free_irqs(h); return -ENODEV; } @@ -8065,7 +8107,7 @@ static int hpsa_request_irqs(struct ctlr_info *h, static int hpsa_kdump_soft_reset(struct ctlr_info *h) { int rc; - hpsa_send_host_reset(h, RAID_CTLR_LUNID, HPSA_RESET_TYPE_CONTROLLER); + hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER); dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY); @@ -8121,6 +8163,11 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) destroy_workqueue(h->rescan_ctlr_wq); h->rescan_ctlr_wq = NULL; } + if (h->monitor_ctlr_wq) { + destroy_workqueue(h->monitor_ctlr_wq); + h->monitor_ctlr_wq = NULL; + } + kfree(h); /* init_one 1 */ } @@ -8456,8 +8503,8 @@ static void hpsa_event_monitor_worker(struct work_struct *work) spin_lock_irqsave(&h->lock, flags); if (!h->remove_in_progress) - schedule_delayed_work(&h->event_monitor_work, - HPSA_EVENT_MONITOR_INTERVAL); + queue_delayed_work(h->monitor_ctlr_wq, &h->event_monitor_work, + HPSA_EVENT_MONITOR_INTERVAL); spin_unlock_irqrestore(&h->lock, flags); } @@ -8502,7 +8549,7 @@ static void hpsa_monitor_ctlr_worker(struct work_struct *work) spin_lock_irqsave(&h->lock, flags); if (!h->remove_in_progress) - schedule_delayed_work(&h->monitor_ctlr_work, + queue_delayed_work(h->monitor_ctlr_wq, &h->monitor_ctlr_work, h->heartbeat_sample_interval); spin_unlock_irqrestore(&h->lock, flags); } @@ -8670,6 +8717,12 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto clean7; /* aer/h */ } + h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor"); + if (!h->monitor_ctlr_wq) { + rc = -ENOMEM; + goto clean7; + } + /* * At this point, the controller is ready to take commands. * Now, if reset_devices and the hard reset didn't work, try @@ -8799,6 +8852,10 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) destroy_workqueue(h->rescan_ctlr_wq); h->rescan_ctlr_wq = NULL; } + if (h->monitor_ctlr_wq) { + destroy_workqueue(h->monitor_ctlr_wq); + h->monitor_ctlr_wq = NULL; + } kfree(h); return rc; } @@ -8946,6 +9003,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) cancel_delayed_work_sync(&h->event_monitor_work); destroy_workqueue(h->rescan_ctlr_wq); destroy_workqueue(h->resubmit_wq); + destroy_workqueue(h->monitor_ctlr_wq); hpsa_delete_sas_host(h); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 59e023696fff..f8c88fc7b80a 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -65,6 +65,7 @@ struct hpsa_scsi_dev_t { u8 physical_device : 1; u8 expose_device; u8 removed : 1; /* device is marked for death */ + u8 was_removed : 1; /* device actually removed */ #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" unsigned char device_id[16]; /* from inquiry pg. 0x83 */ u64 sas_address; @@ -75,11 +76,12 @@ struct hpsa_scsi_dev_t { unsigned char raid_level; /* from inquiry page 0xC1 */ unsigned char volume_offline; /* discovered via TUR or VPD */ u16 queue_depth; /* max queue_depth for this device */ - atomic_t reset_cmds_out; /* Count of commands to-be affected */ + atomic_t commands_outstanding; /* track commands sent to device */ atomic_t ioaccel_cmds_out; /* Only used for physical devices * counts commands sent to physical * device via "ioaccel" path. */ + bool in_reset; u32 ioaccel_handle; u8 active_path_index; u8 path_map; @@ -174,6 +176,7 @@ struct ctlr_info { struct CfgTable __iomem *cfgtable; int interrupts_enabled; int max_commands; + int last_collision_tag; /* tags are global */ atomic_t commands_outstanding; # define PERF_MODE_INT 0 # define DOORBELL_INT 1 @@ -300,6 +303,7 @@ struct ctlr_info { int needs_abort_tags_swizzled; struct workqueue_struct *resubmit_wq; struct workqueue_struct *rescan_ctlr_wq; + struct workqueue_struct *monitor_ctlr_wq; atomic_t abort_cmds_available; wait_queue_head_t event_sync_wait_queue; struct mutex reset_mutex; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index f6afca4b2319..7825cbfea4dc 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -448,7 +448,7 @@ struct CommandList { struct hpsa_scsi_dev_t *phys_disk; int abort_pending; - struct hpsa_scsi_dev_t *reset_pending; + struct hpsa_scsi_dev_t *device; atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ } __aligned(COMMANDLIST_ALIGNMENT); diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 4aea97ee4b24..7f66a7783209 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -814,7 +814,7 @@ static void ibmvscsi_reset_host(struct ibmvscsi_host_data *hostdata) atomic_set(&hostdata->request_limit, 0); purge_requests(hostdata, DID_ERROR); - hostdata->reset_crq = 1; + hostdata->action = IBMVSCSI_HOST_ACTION_RESET; wake_up(&hostdata->work_wait_q); } @@ -1165,7 +1165,8 @@ static void login_rsp(struct srp_event_struct *evt_struct) be32_to_cpu(evt_struct->xfer_iu->srp.login_rsp.req_lim_delta)); /* If we had any pending I/Os, kick them */ - scsi_unblock_requests(hostdata->host); + hostdata->action = IBMVSCSI_HOST_ACTION_UNBLOCK; + wake_up(&hostdata->work_wait_q); } /** @@ -1783,7 +1784,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq, /* We need to re-setup the interpartition connection */ dev_info(hostdata->dev, "Re-enabling adapter!\n"); hostdata->client_migrated = 1; - hostdata->reenable_crq = 1; + hostdata->action = IBMVSCSI_HOST_ACTION_REENABLE; purge_requests(hostdata, DID_REQUEUE); wake_up(&hostdata->work_wait_q); } else { @@ -2036,6 +2037,16 @@ static struct device_attribute ibmvscsi_host_config = { .show = show_host_config, }; +static int ibmvscsi_host_reset(struct Scsi_Host *shost, int reset_type) +{ + struct ibmvscsi_host_data *hostdata = shost_priv(shost); + + dev_info(hostdata->dev, "Initiating adapter reset!\n"); + ibmvscsi_reset_host(hostdata); + + return 0; +} + static struct device_attribute *ibmvscsi_attrs[] = { &ibmvscsi_host_vhost_loc, &ibmvscsi_host_vhost_name, @@ -2062,6 +2073,7 @@ static struct scsi_host_template driver_template = { .eh_host_reset_handler = ibmvscsi_eh_host_reset_handler, .slave_configure = ibmvscsi_slave_configure, .change_queue_depth = ibmvscsi_change_queue_depth, + .host_reset = ibmvscsi_host_reset, .cmd_per_lun = IBMVSCSI_CMDS_PER_LUN_DEFAULT, .can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT, .this_id = -1, @@ -2091,48 +2103,75 @@ static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev) static void ibmvscsi_do_work(struct ibmvscsi_host_data *hostdata) { + unsigned long flags; int rc; char *action = "reset"; - if (hostdata->reset_crq) { - smp_rmb(); - hostdata->reset_crq = 0; - + spin_lock_irqsave(hostdata->host->host_lock, flags); + switch (hostdata->action) { + case IBMVSCSI_HOST_ACTION_UNBLOCK: + rc = 0; + break; + case IBMVSCSI_HOST_ACTION_RESET: + spin_unlock_irqrestore(hostdata->host->host_lock, flags); rc = ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata); + spin_lock_irqsave(hostdata->host->host_lock, flags); if (!rc) rc = ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0); vio_enable_interrupts(to_vio_dev(hostdata->dev)); - } else if (hostdata->reenable_crq) { - smp_rmb(); + break; + case IBMVSCSI_HOST_ACTION_REENABLE: action = "enable"; + spin_unlock_irqrestore(hostdata->host->host_lock, flags); rc = ibmvscsi_reenable_crq_queue(&hostdata->queue, hostdata); - hostdata->reenable_crq = 0; + spin_lock_irqsave(hostdata->host->host_lock, flags); if (!rc) rc = ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0); - } else + break; + case IBMVSCSI_HOST_ACTION_NONE: + default: + spin_unlock_irqrestore(hostdata->host->host_lock, flags); return; + } + + hostdata->action = IBMVSCSI_HOST_ACTION_NONE; if (rc) { atomic_set(&hostdata->request_limit, -1); dev_err(hostdata->dev, "error after %s\n", action); } + spin_unlock_irqrestore(hostdata->host->host_lock, flags); scsi_unblock_requests(hostdata->host); } -static int ibmvscsi_work_to_do(struct ibmvscsi_host_data *hostdata) +static int __ibmvscsi_work_to_do(struct ibmvscsi_host_data *hostdata) { if (kthread_should_stop()) return 1; - else if (hostdata->reset_crq) { - smp_rmb(); - return 1; - } else if (hostdata->reenable_crq) { - smp_rmb(); - return 1; + switch (hostdata->action) { + case IBMVSCSI_HOST_ACTION_NONE: + return 0; + case IBMVSCSI_HOST_ACTION_RESET: + case IBMVSCSI_HOST_ACTION_REENABLE: + case IBMVSCSI_HOST_ACTION_UNBLOCK: + default: + break; } - return 0; + return 1; +} + +static int ibmvscsi_work_to_do(struct ibmvscsi_host_data *hostdata) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(hostdata->host->host_lock, flags); + rc = __ibmvscsi_work_to_do(hostdata); + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + + return rc; } static int ibmvscsi_work(void *data) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h index 6ebd1410488d..e60916ef7a49 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.h +++ b/drivers/scsi/ibmvscsi/ibmvscsi.h @@ -74,13 +74,19 @@ struct event_pool { dma_addr_t iu_token; }; +enum ibmvscsi_host_action { + IBMVSCSI_HOST_ACTION_NONE = 0, + IBMVSCSI_HOST_ACTION_RESET, + IBMVSCSI_HOST_ACTION_REENABLE, + IBMVSCSI_HOST_ACTION_UNBLOCK, +}; + /* all driver data associated with a host adapter */ struct ibmvscsi_host_data { struct list_head host_list; atomic_t request_limit; int client_migrated; - int reset_crq; - int reenable_crq; + enum ibmvscsi_host_action action; struct device *dev; struct event_pool pool; struct crq_queue queue; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 9d29edb9f590..49aa4e657c44 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1087,7 +1087,7 @@ static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *s if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { sci_change_state(&idev->sm, SCI_STP_DEV_IDLE); - } else if (dev_is_expander(dev)) { + } else if (dev_is_expander(dev->dev_type)) { sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); } else isci_remote_device_ready(ihost, idev); @@ -1478,7 +1478,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, struct domain_device *dev = idev->domain_dev; enum sci_status status; - if (dev->parent && dev_is_expander(dev->parent)) + if (dev->parent && dev_is_expander(dev->parent->dev_type)) status = sci_remote_device_ea_construct(iport, idev); else status = sci_remote_device_da_construct(iport, idev); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 47a013fffae7..3ad681c4c20a 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -295,11 +295,6 @@ static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_conte return idev; } -static inline bool dev_is_expander(struct domain_device *dev) -{ - return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE; -} - static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) { /* XXX delete this voodoo when converting to the top-level device diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 1b18cf55167e..343d24c7e788 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -224,7 +224,7 @@ static void scu_ssp_request_construct_task_context( idev = ireq->target_device; iport = idev->owning_port; - /* Fill in the TC with the its required data */ + /* Fill in the TC with its required data */ task_context->abort = 0; task_context->priority = 0; task_context->initiator_request = 1; @@ -506,7 +506,7 @@ static void scu_sata_request_construct_task_context( idev = ireq->target_device; iport = idev->owning_port; - /* Fill in the TC with the its required data */ + /* Fill in the TC with its required data */ task_context->abort = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->initiator_request = 1; @@ -3101,7 +3101,7 @@ sci_io_request_construct(struct isci_host *ihost, /* pass */; else if (dev_is_sata(dev)) memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); - else if (dev_is_expander(dev)) + else if (dev_is_expander(dev->dev_type)) /* pass */; else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; @@ -3235,7 +3235,7 @@ sci_io_request_construct_smp(struct device *dev, iport = idev->owning_port; /* - * Fill in the TC with the its required data + * Fill in the TC with its required data * 00h */ task_context->priority = 0; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index fb6eba331ac6..26fa1a4d1e6b 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -511,7 +511,7 @@ int isci_task_abort_task(struct sas_task *task) "%s: dev = %p (%s%s), task = %p, old_request == %p\n", __func__, idev, (dev_is_sata(task->dev) ? "STP/SATA" - : ((dev_is_expander(task->dev)) + : ((dev_is_expander(task->dev->dev_type)) ? "SMP" : "SSP")), ((idev) ? ((test_bit(IDEV_GONE, &idev->flags)) diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 719e57685dd5..6ef93c7af954 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -8,8 +8,6 @@ * Copyright (C) 2006 Red Hat, Inc. All rights reserved. * maintained by open-iscsi@googlegroups.com * - * See the file COPYING included with this distribution for more details. - * * Credits: * Christoph Hellwig * FUJITA Tomonori diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 726ada9b8c79..abcad097ff2f 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Discover process * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov - * - * This file is licensed under GPLv2. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include @@ -309,7 +293,7 @@ void sas_free_device(struct kref *kref) dev->phy = NULL; /* remove the phys and ports, everything else should be gone */ - if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) + if (dev_is_expander(dev->dev_type)) kfree(dev->ex_dev.ex_phy); if (dev_is_sata(dev) && dev->sata_dev.ap) { @@ -519,8 +503,7 @@ static void sas_revalidate_domain(struct work_struct *work) pr_debug("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id, task_pid_nr(current)); - if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE || - ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE)) + if (ddev && dev_is_expander(ddev->dev_type)) res = sas_ex_revalidate_domain(ddev); pr_debug("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n", diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index b1e0f7d2b396..a1852f6c042b 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Event processing * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov - * - * This file is licensed under GPLv2. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 9f7e2457360e..9fdb9c9fbda4 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Expander discovery and configuration * @@ -5,21 +6,6 @@ * Copyright (C) 2005 Luben Tuikov * * This file is licensed under GPLv2. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include @@ -1106,7 +1092,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) SAS_ADDR(dev->sas_addr), phy_id); sas_ex_disable_phy(dev, phy_id); - break; + return res; } else memcpy(dev->port->disc.fanout_sas_addr, ex_phy->attached_sas_addr, SAS_ADDR_SIZE); @@ -1118,27 +1104,9 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) break; } - if (child) { - int i; - - for (i = 0; i < ex->num_phys; i++) { - if (ex->ex_phy[i].phy_state == PHY_VACANT || - ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) - continue; - /* - * Due to races, the phy might not get added to the - * wide port, so we add the phy to the wide port here. - */ - if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == - SAS_ADDR(child->sas_addr)) { - ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; - if (sas_ex_join_wide_port(dev, i)) - pr_debug("Attaching ex phy%02d to wide port %016llx\n", - i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr)); - } - } - } - + if (!child) + pr_notice("ex %016llx phy%02d failed to discover\n", + SAS_ADDR(dev->sas_addr), phy_id); return res; } @@ -1154,8 +1122,7 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) phy->phy_state == PHY_NOT_PRESENT) continue; - if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE || - phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) && + if (dev_is_expander(phy->attached_dev_type) && phy->routing_attr == SUBTRACTIVE_ROUTING) { memcpy(sub_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); @@ -1173,8 +1140,7 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev) u8 sub_addr[SAS_ADDR_SIZE] = {0, }; list_for_each_entry(child, &ex->children, siblings) { - if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE && - child->dev_type != SAS_FANOUT_EXPANDER_DEVICE) + if (!dev_is_expander(child->dev_type)) continue; if (sub_addr[0] == 0) { sas_find_sub_addr(child, sub_addr); @@ -1259,8 +1225,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev) phy->phy_state == PHY_NOT_PRESENT) continue; - if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE || - phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) && + if (dev_is_expander(phy->attached_dev_type) && phy->routing_attr == SUBTRACTIVE_ROUTING) { if (!sub_sas_addr) @@ -1356,8 +1321,7 @@ static int sas_check_parent_topology(struct domain_device *child) if (!child->parent) return 0; - if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE && - child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE) + if (!dev_is_expander(child->parent->dev_type)) return 0; parent_ex = &child->parent->ex_dev; @@ -1653,8 +1617,7 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) struct domain_device *dev; list_for_each_entry(dev, &port->dev_list, dev_list_node) { - if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || - dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { + if (dev_is_expander(dev->dev_type)) { struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); @@ -1886,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev, SAS_ADDR(dev->sas_addr)); } list_for_each_entry(ch, &ex->children, siblings) { - if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { + if (dev_is_expander(ch->dev_type)) { res = sas_find_bcast_dev(ch, src_dev); if (*src_dev) return res; @@ -1903,8 +1866,7 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi list_for_each_entry_safe(child, n, &ex->children, siblings) { set_bit(SAS_DEV_GONE, &child->state); - if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || - child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) + if (dev_is_expander(child->dev_type)) sas_unregister_ex_tree(port, child); else sas_unregister_dev(port, child); @@ -1924,8 +1886,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, if (SAS_ADDR(child->sas_addr) == SAS_ADDR(phy->attached_sas_addr)) { set_bit(SAS_DEV_GONE, &child->state); - if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || - child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) + if (dev_is_expander(child->dev_type)) sas_unregister_ex_tree(parent->port, child); else sas_unregister_dev(parent->port, child); @@ -1954,8 +1915,7 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root, int res = 0; list_for_each_entry(child, &ex_root->children, siblings) { - if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || - child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { + if (dev_is_expander(child->dev_type)) { struct sas_expander_device *ex = rphy_to_expander_device(child->rphy); @@ -2008,8 +1968,7 @@ static int sas_discover_new(struct domain_device *dev, int phy_id) list_for_each_entry(child, &dev->ex_dev.children, siblings) { if (SAS_ADDR(child->sas_addr) == SAS_ADDR(ex_phy->attached_sas_addr)) { - if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || - child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) + if (dev_is_expander(child->dev_type)) res = sas_discover_bfs_by_root(child); break; } diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index d50810da53a9..21c43b18d5d5 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0-or-later +// SPDX-License-Identifier: GPL-2.0-only /* * Serial Attached SCSI (SAS) Transport Layer initialization * diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 1f1e07e98477..01f1738ce6df 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Serial Attached SCSI (SAS) class internal header file * diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index b71f5ac6c7dc..4ca4b1f30bd0 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Phy class * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov - * - * This file is licensed under GPLv2. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include "sas_internal.h" diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 38a10478605c..7c86fd248129 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Port class * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov - * - * This file is licensed under GPLv2. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include "sas_internal.h" @@ -70,7 +54,7 @@ static void sas_resume_port(struct asd_sas_phy *phy) continue; } - if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { + if (dev_is_expander(dev->dev_type)) { dev->ex_dev.ex_change_count = -1; for (i = 0; i < dev->ex_dev.num_phys; i++) { struct ex_phy *phy = &dev->ex_dev.ex_phy[i]; @@ -195,7 +179,7 @@ static void sas_form_port(struct asd_sas_phy *phy) sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN); /* Only insert a revalidate event after initial discovery */ - if (port_dev && sas_dev_type_is_expander(port_dev->dev_type)) { + if (port_dev && dev_is_expander(port_dev->dev_type)) { struct expander_device *ex_dev = &port_dev->ex_dev; ex_dev->ex_change_count = -1; @@ -264,7 +248,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags); /* Only insert revalidate event if the port still has members */ - if (port->port && dev && sas_dev_type_is_expander(dev->dev_type)) { + if (port->port && dev && dev_is_expander(dev->dev_type)) { struct expander_device *ex_dev = &dev->ex_dev; ex_dev->ex_change_count = -1; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index ede0674d8399..4f339f939a51 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0-or-later +// SPDX-License-Identifier: GPL-2.0-only /* * Serial Attached SCSI (SAS) class SCSI Host glue. * diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 2bd1e014103b..ea62322ffe2b 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4097,9 +4097,9 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, } if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC || phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) && - val != FLAGS_TOPOLOGY_MODE_PT_PT) { + val == 4) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "3114 Only non-FC-AL mode is supported\n"); + "3114 Loop mode not supported\n"); return -EINVAL; } phba->cfg_topology = val; @@ -5180,7 +5180,8 @@ lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr, /* set the values on the cq's */ for (i = 0; i < phba->cfg_irq_chann; i++) { - eq = phba->sli4_hba.hdwq[i].hba_eq; + /* Get the EQ corresponding to the IRQ vector */ + eq = phba->sli4_hba.hba_eq_hdl[i].eq; if (!eq) continue; @@ -5301,35 +5302,44 @@ lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr, len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d hdwq None " - "physid %d coreid %d ht %d\n", + "physid %d coreid %d ht %d ua %d\n", phba->sli4_hba.curr_disp_cpu, - cpup->phys_id, - cpup->core_id, cpup->hyper); + cpup->phys_id, cpup->core_id, + (cpup->flag & LPFC_CPU_MAP_HYPER), + (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); else len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d EQ %04d hdwq %04d " - "physid %d coreid %d ht %d\n", + "physid %d coreid %d ht %d ua %d\n", phba->sli4_hba.curr_disp_cpu, cpup->eq, cpup->hdwq, cpup->phys_id, - cpup->core_id, cpup->hyper); + cpup->core_id, + (cpup->flag & LPFC_CPU_MAP_HYPER), + (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); } else { if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY) len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d hdwq None " - "physid %d coreid %d ht %d IRQ %d\n", + "physid %d coreid %d ht %d ua %d IRQ %d\n", phba->sli4_hba.curr_disp_cpu, cpup->phys_id, - cpup->core_id, cpup->hyper, cpup->irq); + cpup->core_id, + (cpup->flag & LPFC_CPU_MAP_HYPER), + (cpup->flag & LPFC_CPU_MAP_UNASSIGN), + cpup->irq); else len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d EQ %04d hdwq %04d " - "physid %d coreid %d ht %d IRQ %d\n", + "physid %d coreid %d ht %d ua %d IRQ %d\n", phba->sli4_hba.curr_disp_cpu, cpup->eq, cpup->hdwq, cpup->phys_id, - cpup->core_id, cpup->hyper, cpup->irq); + cpup->core_id, + (cpup->flag & LPFC_CPU_MAP_HYPER), + (cpup->flag & LPFC_CPU_MAP_UNASSIGN), + cpup->irq); } phba->sli4_hba.curr_disp_cpu++; diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index b0202bc0aa62..b7216d694bff 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -5741,7 +5741,7 @@ lpfc_get_trunk_info(struct bsg_job *job) event_reply->port_speed = phba->sli4_hba.link_state.speed / 1000; event_reply->logical_speed = - phba->sli4_hba.link_state.logical_speed / 100; + phba->sli4_hba.link_state.logical_speed / 1000; job_error: bsg_reply->result = rc; bsg_job_done(job, bsg_reply->result, diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 866374801140..68e9f96242d3 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -572,7 +572,8 @@ void lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba); void lpfc_nvmet_unsol_ls_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb); void lpfc_nvmet_unsol_fcp_event(struct lpfc_hba *phba, uint32_t idx, - struct rqb_dmabuf *nvmebuf, uint64_t isr_ts); + struct rqb_dmabuf *nvmebuf, uint64_t isr_ts, + uint8_t cqflag); void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba); void lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 4812bbbf43cc..ec72c39997d2 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -2358,6 +2358,7 @@ static int lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad) { + struct lpfc_hba *phba = vport->phba; struct lpfc_fdmi_attr_entry *ae; uint32_t size; @@ -2366,9 +2367,13 @@ lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport, ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */ ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */ - if (vport->nvmei_support || vport->phba->nvmet_support) - ae->un.AttrTypes[6] = 0x01; /* Type 0x28 - NVME */ ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */ + + /* Check to see if Firmware supports NVME and on physical port */ + if ((phba->sli_rev == LPFC_SLI_REV4) && (vport == phba->pport) && + phba->sli4_hba.pc_sli4_params.nvme) + ae->un.AttrTypes[6] = 0x01; /* Type 0x28 - NVME */ + size = FOURBYTES + 32; ad->AttrLen = cpu_to_be16(size); ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_FC4_TYPES); @@ -2680,9 +2685,12 @@ lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport, ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */ ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */ + ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */ + + /* Check to see if NVME is configured or not */ if (vport->phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) ae->un.AttrTypes[6] = 0x1; /* Type 0x28 - NVME */ - ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */ + size = FOURBYTES + 32; ad->AttrLen = cpu_to_be16(size); ad->AttrType = cpu_to_be16(RPRT_ACTIVE_FC4_TYPES); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 968ed0fd37f7..f12780f4cfbb 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4308,6 +4308,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if ((rspiocb->iocb.ulpStatus == 0) && (ndlp->nlp_flag & NLP_ACC_REGLOGIN)) { if (!lpfc_unreg_rpi(vport, ndlp) && + (!(vport->fc_flag & FC_PT2PT)) && (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || ndlp->nlp_state == NLP_STE_REG_LOGIN_ISSUE)) { lpfc_printf_vlog(vport, KERN_INFO, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index eaaef682de25..6d6b14295734 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -72,7 +72,7 @@ unsigned long _dump_buf_dif_order; spinlock_t _dump_buf_lock; /* Used when mapping IRQ vectors in a driver centric manner */ -uint32_t lpfc_present_cpu; +static uint32_t lpfc_present_cpu; static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); static int lpfc_post_rcv_buf(struct lpfc_hba *); @@ -93,8 +93,8 @@ static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *); static void lpfc_sli4_disable_intr(struct lpfc_hba *); static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t); static void lpfc_sli4_oas_verify(struct lpfc_hba *phba); -static uint16_t lpfc_find_eq_handle(struct lpfc_hba *, uint16_t); static uint16_t lpfc_find_cpu_handle(struct lpfc_hba *, uint16_t, int); +static void lpfc_setup_bg(struct lpfc_hba *, struct Scsi_Host *); static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; @@ -1274,8 +1274,10 @@ lpfc_hb_eq_delay_work(struct work_struct *work) if (!eqcnt) goto requeue; + /* Loop thru all IRQ vectors */ for (i = 0; i < phba->cfg_irq_chann; i++) { - eq = phba->sli4_hba.hdwq[i].hba_eq; + /* Get the EQ corresponding to the IRQ vector */ + eq = phba->sli4_hba.hba_eq_hdl[i].eq; if (eq && eqcnt[eq->last_cpu] < 2) eqcnt[eq->last_cpu]++; continue; @@ -4114,14 +4116,13 @@ lpfc_new_io_buf(struct lpfc_hba *phba, int num_to_alloc) * pci bus space for an I/O. The DMA buffer includes the * number of SGE's necessary to support the sg_tablesize. */ - lpfc_ncmd->data = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool, - GFP_KERNEL, - &lpfc_ncmd->dma_handle); + lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool, + GFP_KERNEL, + &lpfc_ncmd->dma_handle); if (!lpfc_ncmd->data) { kfree(lpfc_ncmd); break; } - memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size); /* * 4K Page alignment is CRITICAL to BlockGuard, double check @@ -4347,6 +4348,9 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) timer_setup(&vport->delayed_disc_tmo, lpfc_delayed_disc_tmo, 0); + if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) + lpfc_setup_bg(phba, shost); + error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev); if (error) goto out_put_shost; @@ -5055,7 +5059,7 @@ lpfc_update_trunk_link_status(struct lpfc_hba *phba, bf_get(lpfc_acqe_fc_la_speed, acqe_fc)); phba->sli4_hba.link_state.logical_speed = - bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc); + bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10; /* We got FC link speed, convert to fc_linkspeed (READ_TOPOLOGY) */ phba->fc_linkspeed = lpfc_async_link_speed_to_read_top( @@ -5158,8 +5162,14 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc) bf_get(lpfc_acqe_fc_la_port_number, acqe_fc); phba->sli4_hba.link_state.fault = bf_get(lpfc_acqe_link_fault, acqe_fc); - phba->sli4_hba.link_state.logical_speed = + + if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) == + LPFC_FC_LA_TYPE_LINK_DOWN) + phba->sli4_hba.link_state.logical_speed = 0; + else if (!phba->sli4_hba.conf_trunk) + phba->sli4_hba.link_state.logical_speed = bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10; + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "2896 Async FC event - Speed:%dGBaud Topology:x%x " "LA Type:x%x Port Type:%d Port Number:%d Logical speed:" @@ -6551,6 +6561,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) spin_lock_init(&phba->sli4_hba.abts_nvmet_buf_list_lock); INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list); INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_io_wait_list); + spin_lock_init(&phba->sli4_hba.t_active_list_lock); + INIT_LIST_HEAD(&phba->sli4_hba.t_active_ctx_list); } /* This abort list used by worker thread */ @@ -7660,8 +7672,6 @@ lpfc_post_init_setup(struct lpfc_hba *phba) */ shost = pci_get_drvdata(phba->pcidev); shost->can_queue = phba->cfg_hba_queue_depth - 10; - if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) - lpfc_setup_bg(phba, shost); lpfc_host_attrib_init(shost); @@ -8740,8 +8750,10 @@ int lpfc_sli4_queue_create(struct lpfc_hba *phba) { struct lpfc_queue *qdesc; - int idx, eqidx, cpu; + int idx, cpu, eqcpu; struct lpfc_sli4_hdw_queue *qp; + struct lpfc_vector_map_info *cpup; + struct lpfc_vector_map_info *eqcpup; struct lpfc_eq_intr_info *eqi; /* @@ -8826,40 +8838,60 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba) INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list); /* Create HBA Event Queues (EQs) */ - for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { - /* determine EQ affinity */ - eqidx = lpfc_find_eq_handle(phba, idx); - cpu = lpfc_find_cpu_handle(phba, eqidx, LPFC_FIND_BY_EQ); - /* - * If there are more Hardware Queues than available - * EQs, multiple Hardware Queues may share a common EQ. + for_each_present_cpu(cpu) { + /* We only want to create 1 EQ per vector, even though + * multiple CPUs might be using that vector. so only + * selects the CPUs that are LPFC_CPU_FIRST_IRQ. */ - if (idx >= phba->cfg_irq_chann) { - /* Share an existing EQ */ - phba->sli4_hba.hdwq[idx].hba_eq = - phba->sli4_hba.hdwq[eqidx].hba_eq; + cpup = &phba->sli4_hba.cpu_map[cpu]; + if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) continue; - } - /* Create an EQ */ + + /* Get a ptr to the Hardware Queue associated with this CPU */ + qp = &phba->sli4_hba.hdwq[cpup->hdwq]; + + /* Allocate an EQ */ qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, phba->sli4_hba.eq_esize, phba->sli4_hba.eq_ecount, cpu); if (!qdesc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0497 Failed allocate EQ (%d)\n", idx); + "0497 Failed allocate EQ (%d)\n", + cpup->hdwq); goto out_error; } qdesc->qe_valid = 1; - qdesc->hdwq = idx; - - /* Save the CPU this EQ is affinitised to */ - qdesc->chann = cpu; - phba->sli4_hba.hdwq[idx].hba_eq = qdesc; + qdesc->hdwq = cpup->hdwq; + qdesc->chann = cpu; /* First CPU this EQ is affinitised to */ qdesc->last_cpu = qdesc->chann; + + /* Save the allocated EQ in the Hardware Queue */ + qp->hba_eq = qdesc; + eqi = per_cpu_ptr(phba->sli4_hba.eq_info, qdesc->last_cpu); list_add(&qdesc->cpu_list, &eqi->list); } + /* Now we need to populate the other Hardware Queues, that share + * an IRQ vector, with the associated EQ ptr. + */ + for_each_present_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Check for EQ already allocated in previous loop */ + if (cpup->flag & LPFC_CPU_FIRST_IRQ) + continue; + + /* Check for multiple CPUs per hdwq */ + qp = &phba->sli4_hba.hdwq[cpup->hdwq]; + if (qp->hba_eq) + continue; + + /* We need to share an EQ for this hdwq */ + eqcpu = lpfc_find_cpu_handle(phba, cpup->eq, LPFC_FIND_BY_EQ); + eqcpup = &phba->sli4_hba.cpu_map[eqcpu]; + qp->hba_eq = phba->sli4_hba.hdwq[eqcpup->hdwq].hba_eq; + } /* Allocate SCSI SLI4 CQ/WQs */ for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { @@ -9122,23 +9154,31 @@ static inline void lpfc_sli4_release_hdwq(struct lpfc_hba *phba) { struct lpfc_sli4_hdw_queue *hdwq; + struct lpfc_queue *eq; uint32_t idx; hdwq = phba->sli4_hba.hdwq; - for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { - if (idx < phba->cfg_irq_chann) - lpfc_sli4_queue_free(hdwq[idx].hba_eq); - hdwq[idx].hba_eq = NULL; + /* Loop thru all Hardware Queues */ + for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { + /* Free the CQ/WQ corresponding to the Hardware Queue */ lpfc_sli4_queue_free(hdwq[idx].fcp_cq); lpfc_sli4_queue_free(hdwq[idx].nvme_cq); lpfc_sli4_queue_free(hdwq[idx].fcp_wq); lpfc_sli4_queue_free(hdwq[idx].nvme_wq); + hdwq[idx].hba_eq = NULL; hdwq[idx].fcp_cq = NULL; hdwq[idx].nvme_cq = NULL; hdwq[idx].fcp_wq = NULL; hdwq[idx].nvme_wq = NULL; } + /* Loop thru all IRQ vectors */ + for (idx = 0; idx < phba->cfg_irq_chann; idx++) { + /* Free the EQ corresponding to the IRQ vector */ + eq = phba->sli4_hba.hba_eq_hdl[idx].eq; + lpfc_sli4_queue_free(eq); + phba->sli4_hba.hba_eq_hdl[idx].eq = NULL; + } } /** @@ -9316,16 +9356,17 @@ static void lpfc_setup_cq_lookup(struct lpfc_hba *phba) { struct lpfc_queue *eq, *childq; - struct lpfc_sli4_hdw_queue *qp; int qidx; - qp = phba->sli4_hba.hdwq; memset(phba->sli4_hba.cq_lookup, 0, (sizeof(struct lpfc_queue *) * (phba->sli4_hba.cq_max + 1))); + /* Loop thru all IRQ vectors */ for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { - eq = qp[qidx].hba_eq; + /* Get the EQ corresponding to the IRQ vector */ + eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; if (!eq) continue; + /* Loop through all CQs associated with that EQ */ list_for_each_entry(childq, &eq->child_list, list) { if (childq->queue_id > phba->sli4_hba.cq_max) continue; @@ -9354,9 +9395,10 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) { uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_vector_map_info *cpup; struct lpfc_sli4_hdw_queue *qp; LPFC_MBOXQ_t *mboxq; - int qidx; + int qidx, cpu; uint32_t length, usdelay; int rc = -ENOMEM; @@ -9417,32 +9459,55 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) rc = -ENOMEM; goto out_error; } + + /* Loop thru all IRQ vectors */ for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { - if (!qp[qidx].hba_eq) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0522 Fast-path EQ (%d) not " - "allocated\n", qidx); - rc = -ENOMEM; - goto out_destroy; + /* Create HBA Event Queues (EQs) in order */ + for_each_present_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Look for the CPU thats using that vector with + * LPFC_CPU_FIRST_IRQ set. + */ + if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) + continue; + if (qidx != cpup->eq) + continue; + + /* Create an EQ for that vector */ + rc = lpfc_eq_create(phba, qp[cpup->hdwq].hba_eq, + phba->cfg_fcp_imax); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0523 Failed setup of fast-path" + " EQ (%d), rc = 0x%x\n", + cpup->eq, (uint32_t)rc); + goto out_destroy; + } + + /* Save the EQ for that vector in the hba_eq_hdl */ + phba->sli4_hba.hba_eq_hdl[cpup->eq].eq = + qp[cpup->hdwq].hba_eq; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "2584 HBA EQ setup: queue[%d]-id=%d\n", + cpup->eq, + qp[cpup->hdwq].hba_eq->queue_id); } - rc = lpfc_eq_create(phba, qp[qidx].hba_eq, - phba->cfg_fcp_imax); - if (rc) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0523 Failed setup of fast-path EQ " - "(%d), rc = 0x%x\n", qidx, - (uint32_t)rc); - goto out_destroy; - } - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "2584 HBA EQ setup: queue[%d]-id=%d\n", qidx, - qp[qidx].hba_eq->queue_id); } + /* Loop thru all Hardware Queues */ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { + cpu = lpfc_find_cpu_handle(phba, qidx, + LPFC_FIND_BY_HDWQ); + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Create the CQ/WQ corresponding to the + * Hardware Queue + */ rc = lpfc_create_wq_cq(phba, - qp[qidx].hba_eq, + phba->sli4_hba.hdwq[cpup->hdwq].hba_eq, qp[qidx].nvme_cq, qp[qidx].nvme_wq, &phba->sli4_hba.hdwq[qidx].nvme_cq_map, @@ -9458,8 +9523,12 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) } for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { + cpu = lpfc_find_cpu_handle(phba, qidx, LPFC_FIND_BY_HDWQ); + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Create the CQ/WQ corresponding to the Hardware Queue */ rc = lpfc_create_wq_cq(phba, - qp[qidx].hba_eq, + phba->sli4_hba.hdwq[cpup->hdwq].hba_eq, qp[qidx].fcp_cq, qp[qidx].fcp_wq, &phba->sli4_hba.hdwq[qidx].fcp_cq_map, @@ -9711,6 +9780,7 @@ void lpfc_sli4_queue_unset(struct lpfc_hba *phba) { struct lpfc_sli4_hdw_queue *qp; + struct lpfc_queue *eq; int qidx; /* Unset mailbox command work queue */ @@ -9762,14 +9832,20 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) /* Unset fast-path SLI4 queues */ if (phba->sli4_hba.hdwq) { + /* Loop thru all Hardware Queues */ for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { + /* Destroy the CQ/WQ corresponding to Hardware Queue */ qp = &phba->sli4_hba.hdwq[qidx]; lpfc_wq_destroy(phba, qp->fcp_wq); lpfc_wq_destroy(phba, qp->nvme_wq); lpfc_cq_destroy(phba, qp->fcp_cq); lpfc_cq_destroy(phba, qp->nvme_cq); - if (qidx < phba->cfg_irq_chann) - lpfc_eq_destroy(phba, qp->hba_eq); + } + /* Loop thru all IRQ vectors */ + for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { + /* Destroy the EQ corresponding to the IRQ vector */ + eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; + lpfc_eq_destroy(phba, eq); } } @@ -10559,11 +10635,12 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) } /** - * lpfc_find_cpu_handle - Find the CPU that corresponds to the specified EQ + * lpfc_find_cpu_handle - Find the CPU that corresponds to the specified Queue * @phba: pointer to lpfc hba data structure. * @id: EQ vector index or Hardware Queue index * @match: LPFC_FIND_BY_EQ = match by EQ * LPFC_FIND_BY_HDWQ = match by Hardware Queue + * Return the CPU that matches the selection criteria */ static uint16_t lpfc_find_cpu_handle(struct lpfc_hba *phba, uint16_t id, int match) @@ -10571,40 +10648,27 @@ lpfc_find_cpu_handle(struct lpfc_hba *phba, uint16_t id, int match) struct lpfc_vector_map_info *cpup; int cpu; - /* Find the desired phys_id for the specified EQ */ + /* Loop through all CPUs */ for_each_present_cpu(cpu) { cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* If we are matching by EQ, there may be multiple CPUs using + * using the same vector, so select the one with + * LPFC_CPU_FIRST_IRQ set. + */ if ((match == LPFC_FIND_BY_EQ) && + (cpup->flag & LPFC_CPU_FIRST_IRQ) && (cpup->irq != LPFC_VECTOR_MAP_EMPTY) && (cpup->eq == id)) return cpu; + + /* If matching by HDWQ, select the first CPU that matches */ if ((match == LPFC_FIND_BY_HDWQ) && (cpup->hdwq == id)) return cpu; } return 0; } -/** - * lpfc_find_eq_handle - Find the EQ that corresponds to the specified - * Hardware Queue - * @phba: pointer to lpfc hba data structure. - * @hdwq: Hardware Queue index - */ -static uint16_t -lpfc_find_eq_handle(struct lpfc_hba *phba, uint16_t hdwq) -{ - struct lpfc_vector_map_info *cpup; - int cpu; - - /* Find the desired phys_id for the specified EQ */ - for_each_present_cpu(cpu) { - cpup = &phba->sli4_hba.cpu_map[cpu]; - if (cpup->hdwq == hdwq) - return cpup->eq; - } - return 0; -} - #ifdef CONFIG_X86 /** * lpfc_find_hyper - Determine if the CPU map entry is hyper-threaded @@ -10645,24 +10709,31 @@ lpfc_find_hyper(struct lpfc_hba *phba, int cpu, static void lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) { - int i, cpu, idx; + int i, cpu, idx, new_cpu, start_cpu, first_cpu; int max_phys_id, min_phys_id; int max_core_id, min_core_id; struct lpfc_vector_map_info *cpup; + struct lpfc_vector_map_info *new_cpup; const struct cpumask *maskp; #ifdef CONFIG_X86 struct cpuinfo_x86 *cpuinfo; #endif /* Init cpu_map array */ - memset(phba->sli4_hba.cpu_map, 0xff, - (sizeof(struct lpfc_vector_map_info) * - phba->sli4_hba.num_possible_cpu)); + for_each_possible_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + cpup->phys_id = LPFC_VECTOR_MAP_EMPTY; + cpup->core_id = LPFC_VECTOR_MAP_EMPTY; + cpup->hdwq = LPFC_VECTOR_MAP_EMPTY; + cpup->eq = LPFC_VECTOR_MAP_EMPTY; + cpup->irq = LPFC_VECTOR_MAP_EMPTY; + cpup->flag = 0; + } max_phys_id = 0; - min_phys_id = 0xffff; + min_phys_id = LPFC_VECTOR_MAP_EMPTY; max_core_id = 0; - min_core_id = 0xffff; + min_core_id = LPFC_VECTOR_MAP_EMPTY; /* Update CPU map with physical id and core id of each CPU */ for_each_present_cpu(cpu) { @@ -10671,13 +10742,12 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) cpuinfo = &cpu_data(cpu); cpup->phys_id = cpuinfo->phys_proc_id; cpup->core_id = cpuinfo->cpu_core_id; - cpup->hyper = lpfc_find_hyper(phba, cpu, - cpup->phys_id, cpup->core_id); + if (lpfc_find_hyper(phba, cpu, cpup->phys_id, cpup->core_id)) + cpup->flag |= LPFC_CPU_MAP_HYPER; #else /* No distinction between CPUs for other platforms */ cpup->phys_id = 0; cpup->core_id = cpu; - cpup->hyper = 0; #endif lpfc_printf_log(phba, KERN_INFO, LOG_INIT, @@ -10703,23 +10773,216 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) eqi->icnt = 0; } + /* This loop sets up all CPUs that are affinitized with a + * irq vector assigned to the driver. All affinitized CPUs + * will get a link to that vectors IRQ and EQ. + */ for (idx = 0; idx < phba->cfg_irq_chann; idx++) { + /* Get a CPU mask for all CPUs affinitized to this vector */ maskp = pci_irq_get_affinity(phba->pcidev, idx); if (!maskp) continue; + i = 0; + /* Loop through all CPUs associated with vector idx */ for_each_cpu_and(cpu, maskp, cpu_present_mask) { + /* Set the EQ index and IRQ for that vector */ cpup = &phba->sli4_hba.cpu_map[cpu]; cpup->eq = idx; - cpup->hdwq = idx; cpup->irq = pci_irq_vector(phba->pcidev, idx); - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "3336 Set Affinity: CPU %d " - "hdwq %d irq %d\n", - cpu, cpup->hdwq, cpup->irq); + "irq %d eq %d\n", + cpu, cpup->irq, cpup->eq); + + /* If this is the first CPU thats assigned to this + * vector, set LPFC_CPU_FIRST_IRQ. + */ + if (!i) + cpup->flag |= LPFC_CPU_FIRST_IRQ; + i++; } } + + /* After looking at each irq vector assigned to this pcidev, its + * possible to see that not ALL CPUs have been accounted for. + * Next we will set any unassigned (unaffinitized) cpu map + * entries to a IRQ on the same phys_id. + */ + first_cpu = cpumask_first(cpu_present_mask); + start_cpu = first_cpu; + + for_each_present_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Is this CPU entry unassigned */ + if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { + /* Mark CPU as IRQ not assigned by the kernel */ + cpup->flag |= LPFC_CPU_MAP_UNASSIGN; + + /* If so, find a new_cpup thats on the the SAME + * phys_id as cpup. start_cpu will start where we + * left off so all unassigned entries don't get assgined + * the IRQ of the first entry. + */ + new_cpu = start_cpu; + for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { + new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; + if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) && + (new_cpup->irq != LPFC_VECTOR_MAP_EMPTY) && + (new_cpup->phys_id == cpup->phys_id)) + goto found_same; + new_cpu = cpumask_next( + new_cpu, cpu_present_mask); + if (new_cpu == nr_cpumask_bits) + new_cpu = first_cpu; + } + /* At this point, we leave the CPU as unassigned */ + continue; +found_same: + /* We found a matching phys_id, so copy the IRQ info */ + cpup->eq = new_cpup->eq; + cpup->irq = new_cpup->irq; + + /* Bump start_cpu to the next slot to minmize the + * chance of having multiple unassigned CPU entries + * selecting the same IRQ. + */ + start_cpu = cpumask_next(new_cpu, cpu_present_mask); + if (start_cpu == nr_cpumask_bits) + start_cpu = first_cpu; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3337 Set Affinity: CPU %d " + "irq %d from id %d same " + "phys_id (%d)\n", + cpu, cpup->irq, new_cpu, cpup->phys_id); + } + } + + /* Set any unassigned cpu map entries to a IRQ on any phys_id */ + start_cpu = first_cpu; + + for_each_present_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + + /* Is this entry unassigned */ + if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { + /* Mark it as IRQ not assigned by the kernel */ + cpup->flag |= LPFC_CPU_MAP_UNASSIGN; + + /* If so, find a new_cpup thats on ANY phys_id + * as the cpup. start_cpu will start where we + * left off so all unassigned entries don't get + * assigned the IRQ of the first entry. + */ + new_cpu = start_cpu; + for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { + new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; + if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) && + (new_cpup->irq != LPFC_VECTOR_MAP_EMPTY)) + goto found_any; + new_cpu = cpumask_next( + new_cpu, cpu_present_mask); + if (new_cpu == nr_cpumask_bits) + new_cpu = first_cpu; + } + /* We should never leave an entry unassigned */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3339 Set Affinity: CPU %d " + "irq %d UNASSIGNED\n", + cpup->hdwq, cpup->irq); + continue; +found_any: + /* We found an available entry, copy the IRQ info */ + cpup->eq = new_cpup->eq; + cpup->irq = new_cpup->irq; + + /* Bump start_cpu to the next slot to minmize the + * chance of having multiple unassigned CPU entries + * selecting the same IRQ. + */ + start_cpu = cpumask_next(new_cpu, cpu_present_mask); + if (start_cpu == nr_cpumask_bits) + start_cpu = first_cpu; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3338 Set Affinity: CPU %d " + "irq %d from id %d (%d/%d)\n", + cpu, cpup->irq, new_cpu, + new_cpup->phys_id, new_cpup->core_id); + } + } + + /* Finally we need to associate a hdwq with each cpu_map entry + * This will be 1 to 1 - hdwq to cpu, unless there are less + * hardware queues then CPUs. For that case we will just round-robin + * the available hardware queues as they get assigned to CPUs. + */ + idx = 0; + start_cpu = 0; + for_each_present_cpu(cpu) { + cpup = &phba->sli4_hba.cpu_map[cpu]; + if (idx >= phba->cfg_hdw_queue) { + /* We need to reuse a Hardware Queue for another CPU, + * so be smart about it and pick one that has its + * IRQ/EQ mapped to the same phys_id (CPU package). + * and core_id. + */ + new_cpu = start_cpu; + for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { + new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; + if ((new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY) && + (new_cpup->phys_id == cpup->phys_id) && + (new_cpup->core_id == cpup->core_id)) + goto found_hdwq; + new_cpu = cpumask_next( + new_cpu, cpu_present_mask); + if (new_cpu == nr_cpumask_bits) + new_cpu = first_cpu; + } + + /* If we can't match both phys_id and core_id, + * settle for just a phys_id match. + */ + new_cpu = start_cpu; + for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { + new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; + if ((new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY) && + (new_cpup->phys_id == cpup->phys_id)) + goto found_hdwq; + new_cpu = cpumask_next( + new_cpu, cpu_present_mask); + if (new_cpu == nr_cpumask_bits) + new_cpu = first_cpu; + } + + /* Otherwise just round robin on cfg_hdw_queue */ + cpup->hdwq = idx % phba->cfg_hdw_queue; + goto logit; +found_hdwq: + /* We found an available entry, copy the IRQ info */ + start_cpu = cpumask_next(new_cpu, cpu_present_mask); + if (start_cpu == nr_cpumask_bits) + start_cpu = first_cpu; + cpup->hdwq = new_cpup->hdwq; + } else { + /* 1 to 1, CPU to hdwq */ + cpup->hdwq = idx; + } +logit: + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3335 Set Affinity: CPU %d (phys %d core %d): " + "hdwq %d eq %d irq %d flg x%x\n", + cpu, cpup->phys_id, cpup->core_id, + cpup->hdwq, cpup->eq, cpup->irq, cpup->flag); + idx++; + } + + /* The cpu_map array will be used later during initialization + * when EQ / CQ / WQs are allocated and configured. + */ return; } @@ -11331,24 +11594,43 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) mbx_sli4_parameters); phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters); phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters); - phba->nvme_support = (bf_get(cfg_nvme, mbx_sli4_parameters) && - bf_get(cfg_xib, mbx_sli4_parameters)); - if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) || - !phba->nvme_support) { - phba->nvme_support = 0; - phba->nvmet_support = 0; - phba->cfg_nvmet_mrq = 0; - lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME, - "6101 Disabling NVME support: " - "Not supported by firmware: %d %d\n", - bf_get(cfg_nvme, mbx_sli4_parameters), - bf_get(cfg_xib, mbx_sli4_parameters)); + /* Check for firmware nvme support */ + rc = (bf_get(cfg_nvme, mbx_sli4_parameters) && + bf_get(cfg_xib, mbx_sli4_parameters)); - /* If firmware doesn't support NVME, just use SCSI support */ - if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) - return -ENODEV; - phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP; + if (rc) { + /* Save this to indicate the Firmware supports NVME */ + sli4_params->nvme = 1; + + /* Firmware NVME support, check driver FC4 NVME support */ + if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME, + "6133 Disabling NVME support: " + "FC4 type not supported: x%x\n", + phba->cfg_enable_fc4_type); + goto fcponly; + } + } else { + /* No firmware NVME support, check driver FC4 NVME support */ + sli4_params->nvme = 0; + if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME, + "6101 Disabling NVME support: Not " + "supported by firmware (%d %d) x%x\n", + bf_get(cfg_nvme, mbx_sli4_parameters), + bf_get(cfg_xib, mbx_sli4_parameters), + phba->cfg_enable_fc4_type); +fcponly: + phba->nvme_support = 0; + phba->nvmet_support = 0; + phba->cfg_nvmet_mrq = 0; + + /* If no FC4 type support, move to just SCSI support */ + if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) + return -ENODEV; + phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP; + } } /* Only embed PBDE for if_type 6, PBDE support requires xib be set */ diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index fdd16d9f55a1..946642cee3df 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -2143,7 +2143,9 @@ lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport, struct completion *lport_unreg_cmp) { u32 wait_tmo; - int ret; + int ret, i, pending = 0; + struct lpfc_sli_ring *pring; + struct lpfc_hba *phba = vport->phba; /* Host transport has to clean up and confirm requiring an indefinite * wait. Print a message if a 10 second wait expires and renew the @@ -2153,10 +2155,18 @@ lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport, while (true) { ret = wait_for_completion_timeout(lport_unreg_cmp, wait_tmo); if (unlikely(!ret)) { + pending = 0; + for (i = 0; i < phba->cfg_hdw_queue; i++) { + pring = phba->sli4_hba.hdwq[i].nvme_wq->pring; + if (!pring) + continue; + if (pring->txcmplq_cnt) + pending += pring->txcmplq_cnt; + } lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR, "6176 Lport %p Localport %p wait " - "timed out. Renewing.\n", - lport, vport->localport); + "timed out. Pending %d. Renewing.\n", + lport, vport->localport, pending); continue; } break; diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c index 06170824a69b..d5812719de2b 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -220,19 +220,68 @@ lpfc_nvmet_cmd_template(void) /* Word 12, 13, 14, 15 - is zero */ } +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) +static struct lpfc_nvmet_rcv_ctx * +lpfc_nvmet_get_ctx_for_xri(struct lpfc_hba *phba, u16 xri) +{ + struct lpfc_nvmet_rcv_ctx *ctxp; + unsigned long iflag; + bool found = false; + + spin_lock_irqsave(&phba->sli4_hba.t_active_list_lock, iflag); + list_for_each_entry(ctxp, &phba->sli4_hba.t_active_ctx_list, list) { + if (ctxp->ctxbuf->sglq->sli4_xritag != xri) + continue; + + found = true; + break; + } + spin_unlock_irqrestore(&phba->sli4_hba.t_active_list_lock, iflag); + if (found) + return ctxp; + + return NULL; +} + +static struct lpfc_nvmet_rcv_ctx * +lpfc_nvmet_get_ctx_for_oxid(struct lpfc_hba *phba, u16 oxid, u32 sid) +{ + struct lpfc_nvmet_rcv_ctx *ctxp; + unsigned long iflag; + bool found = false; + + spin_lock_irqsave(&phba->sli4_hba.t_active_list_lock, iflag); + list_for_each_entry(ctxp, &phba->sli4_hba.t_active_ctx_list, list) { + if (ctxp->oxid != oxid || ctxp->sid != sid) + continue; + + found = true; + break; + } + spin_unlock_irqrestore(&phba->sli4_hba.t_active_list_lock, iflag); + if (found) + return ctxp; + + return NULL; +} +#endif + static void lpfc_nvmet_defer_release(struct lpfc_hba *phba, struct lpfc_nvmet_rcv_ctx *ctxp) { lockdep_assert_held(&ctxp->ctxlock); lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6313 NVMET Defer ctx release xri x%x flg x%x\n", + "6313 NVMET Defer ctx release oxid x%x flg x%x\n", ctxp->oxid, ctxp->flag); if (ctxp->flag & LPFC_NVMET_CTX_RLS) return; ctxp->flag |= LPFC_NVMET_CTX_RLS; + spin_lock(&phba->sli4_hba.t_active_list_lock); + list_del(&ctxp->list); + spin_unlock(&phba->sli4_hba.t_active_list_lock); spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock); list_add_tail(&ctxp->list, &phba->sli4_hba.lpfc_abts_nvmet_ctx_list); spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); @@ -343,16 +392,23 @@ lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf) } if (ctxp->rqb_buffer) { - nvmebuf = ctxp->rqb_buffer; spin_lock_irqsave(&ctxp->ctxlock, iflag); - ctxp->rqb_buffer = NULL; - if (ctxp->flag & LPFC_NVMET_CTX_REUSE_WQ) { - ctxp->flag &= ~LPFC_NVMET_CTX_REUSE_WQ; - spin_unlock_irqrestore(&ctxp->ctxlock, iflag); - nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf); + nvmebuf = ctxp->rqb_buffer; + /* check if freed in another path whilst acquiring lock */ + if (nvmebuf) { + ctxp->rqb_buffer = NULL; + if (ctxp->flag & LPFC_NVMET_CTX_REUSE_WQ) { + ctxp->flag &= ~LPFC_NVMET_CTX_REUSE_WQ; + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + nvmebuf->hrq->rqbp->rqb_free_buffer(phba, + nvmebuf); + } else { + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + /* repost */ + lpfc_rq_buf_free(phba, &nvmebuf->hbuf); + } } else { spin_unlock_irqrestore(&ctxp->ctxlock, iflag); - lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */ } } ctxp->state = LPFC_NVMET_STE_FREE; @@ -388,8 +444,9 @@ lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf) spin_lock_init(&ctxp->ctxlock); #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - if (ctxp->ts_cmd_nvme) { - ctxp->ts_cmd_nvme = ktime_get_ns(); + /* NOTE: isr time stamp is stale when context is re-assigned*/ + if (ctxp->ts_isr_cmd) { + ctxp->ts_cmd_nvme = 0; ctxp->ts_nvme_data = 0; ctxp->ts_data_wqput = 0; ctxp->ts_isr_data = 0; @@ -402,9 +459,7 @@ lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf) #endif atomic_inc(&tgtp->rcv_fcp_cmd_in); - /* flag new work queued, replacement buffer has already - * been reposted - */ + /* Indicate that a replacement buffer has been posted */ spin_lock_irqsave(&ctxp->ctxlock, iflag); ctxp->flag |= LPFC_NVMET_CTX_REUSE_WQ; spin_unlock_irqrestore(&ctxp->ctxlock, iflag); @@ -433,6 +488,9 @@ lpfc_nvmet_ctxbuf_post(struct lpfc_hba *phba, struct lpfc_nvmet_ctxbuf *ctx_buf) * Use the CPU context list, from the MRQ the IO was received on * (ctxp->idx), to save context structure. */ + spin_lock_irqsave(&phba->sli4_hba.t_active_list_lock, iflag); + list_del_init(&ctxp->list); + spin_unlock_irqrestore(&phba->sli4_hba.t_active_list_lock, iflag); cpu = raw_smp_processor_id(); infop = lpfc_get_ctx_list(phba, cpu, ctxp->idx); spin_lock_irqsave(&infop->nvmet_ctx_list_lock, iflag); @@ -700,8 +758,10 @@ lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, } lpfc_printf_log(phba, KERN_INFO, logerr, - "6315 IO Error Cmpl xri x%x: %x/%x XBUSY:x%x\n", - ctxp->oxid, status, result, ctxp->flag); + "6315 IO Error Cmpl oxid: x%x xri: x%x %x/%x " + "XBUSY:x%x\n", + ctxp->oxid, ctxp->ctxbuf->sglq->sli4_xritag, + status, result, ctxp->flag); } else { rsp->fcp_error = NVME_SC_SUCCESS; @@ -849,7 +909,6 @@ lpfc_nvmet_xmt_ls_rsp(struct nvmet_fc_target_port *tgtport, * before freeing ctxp and iocbq. */ lpfc_in_buf_free(phba, &nvmebuf->dbuf); - ctxp->rqb_buffer = 0; atomic_inc(&nvmep->xmt_ls_rsp); return 0; } @@ -922,7 +981,7 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport, (ctxp->state == LPFC_NVMET_STE_ABORT)) { atomic_inc(&lpfc_nvmep->xmt_fcp_drop); lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, - "6102 IO xri x%x aborted\n", + "6102 IO oxid x%x aborted\n", ctxp->oxid); rc = -ENXIO; goto aerr; @@ -1022,7 +1081,7 @@ lpfc_nvmet_xmt_fcp_abort(struct nvmet_fc_target_port *tgtport, ctxp->hdwq = &phba->sli4_hba.hdwq[0]; lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6103 NVMET Abort op: oxri x%x flg x%x ste %d\n", + "6103 NVMET Abort op: oxid x%x flg x%x ste %d\n", ctxp->oxid, ctxp->flag, ctxp->state); lpfc_nvmeio_data(phba, "NVMET FCP ABRT: xri x%x flg x%x ste x%x\n", @@ -1035,7 +1094,7 @@ lpfc_nvmet_xmt_fcp_abort(struct nvmet_fc_target_port *tgtport, /* Since iaab/iaar are NOT set, we need to check * if the firmware is in process of aborting IO */ - if (ctxp->flag & LPFC_NVMET_XBUSY) { + if (ctxp->flag & (LPFC_NVMET_XBUSY | LPFC_NVMET_ABORT_OP)) { spin_unlock_irqrestore(&ctxp->ctxlock, flags); return; } @@ -1098,6 +1157,7 @@ lpfc_nvmet_xmt_fcp_release(struct nvmet_fc_target_port *tgtport, ctxp->state, aborting); atomic_inc(&lpfc_nvmep->xmt_fcp_release); + ctxp->flag &= ~LPFC_NVMET_TNOTIFY; if (aborting) return; @@ -1122,7 +1182,7 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_target_port *tgtport, if (!nvmebuf) { lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR, - "6425 Defer rcv: no buffer xri x%x: " + "6425 Defer rcv: no buffer oxid x%x: " "flg %x ste %x\n", ctxp->oxid, ctxp->flag, ctxp->state); return; @@ -1514,10 +1574,12 @@ void lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba, struct sli4_wcqe_xri_aborted *axri) { +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri); uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri); struct lpfc_nvmet_rcv_ctx *ctxp, *next_ctxp; struct lpfc_nvmet_tgtport *tgtp; + struct nvmefc_tgt_fcp_req *req = NULL; struct lpfc_nodelist *ndlp; unsigned long iflag = 0; int rrq_empty = 0; @@ -1548,7 +1610,7 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba, */ if (ctxp->flag & LPFC_NVMET_CTX_RLS && !(ctxp->flag & LPFC_NVMET_ABORT_OP)) { - list_del(&ctxp->list); + list_del_init(&ctxp->list); released = true; } ctxp->flag &= ~LPFC_NVMET_XBUSY; @@ -1568,7 +1630,7 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba, } lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6318 XB aborted oxid %x flg x%x (%x)\n", + "6318 XB aborted oxid x%x flg x%x (%x)\n", ctxp->oxid, ctxp->flag, released); if (released) lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf); @@ -1579,6 +1641,33 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba, } spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); spin_unlock_irqrestore(&phba->hbalock, iflag); + + ctxp = lpfc_nvmet_get_ctx_for_xri(phba, xri); + if (ctxp) { + /* + * Abort already done by FW, so BA_ACC sent. + * However, the transport may be unaware. + */ + lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, + "6323 NVMET Rcv ABTS xri x%x ctxp state x%x " + "flag x%x oxid x%x rxid x%x\n", + xri, ctxp->state, ctxp->flag, ctxp->oxid, + rxid); + + spin_lock_irqsave(&ctxp->ctxlock, iflag); + ctxp->flag |= LPFC_NVMET_ABTS_RCV; + ctxp->state = LPFC_NVMET_STE_ABORT; + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + + lpfc_nvmeio_data(phba, + "NVMET ABTS RCV: xri x%x CPU %02x rjt %d\n", + xri, raw_smp_processor_id(), 0); + + req = &ctxp->ctx.fcp_req; + if (req) + nvmet_fc_rcv_fcp_abort(phba->targetport, req); + } +#endif } int @@ -1589,19 +1678,23 @@ lpfc_nvmet_rcv_unsol_abort(struct lpfc_vport *vport, struct lpfc_hba *phba = vport->phba; struct lpfc_nvmet_rcv_ctx *ctxp, *next_ctxp; struct nvmefc_tgt_fcp_req *rsp; - uint16_t xri; + uint32_t sid; + uint16_t oxid, xri; unsigned long iflag = 0; - xri = be16_to_cpu(fc_hdr->fh_ox_id); + sid = sli4_sid_from_fc_hdr(fc_hdr); + oxid = be16_to_cpu(fc_hdr->fh_ox_id); spin_lock_irqsave(&phba->hbalock, iflag); spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock); list_for_each_entry_safe(ctxp, next_ctxp, &phba->sli4_hba.lpfc_abts_nvmet_ctx_list, list) { - if (ctxp->ctxbuf->sglq->sli4_xritag != xri) + if (ctxp->oxid != oxid || ctxp->sid != sid) continue; + xri = ctxp->ctxbuf->sglq->sli4_xritag; + spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); spin_unlock_irqrestore(&phba->hbalock, iflag); @@ -1626,11 +1719,93 @@ lpfc_nvmet_rcv_unsol_abort(struct lpfc_vport *vport, spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); spin_unlock_irqrestore(&phba->hbalock, iflag); - lpfc_nvmeio_data(phba, "NVMET ABTS RCV: xri x%x CPU %02x rjt %d\n", - xri, raw_smp_processor_id(), 1); + /* check the wait list */ + if (phba->sli4_hba.nvmet_io_wait_cnt) { + struct rqb_dmabuf *nvmebuf; + struct fc_frame_header *fc_hdr_tmp; + u32 sid_tmp; + u16 oxid_tmp; + bool found = false; + + spin_lock_irqsave(&phba->sli4_hba.nvmet_io_wait_lock, iflag); + + /* match by oxid and s_id */ + list_for_each_entry(nvmebuf, + &phba->sli4_hba.lpfc_nvmet_io_wait_list, + hbuf.list) { + fc_hdr_tmp = (struct fc_frame_header *) + (nvmebuf->hbuf.virt); + oxid_tmp = be16_to_cpu(fc_hdr_tmp->fh_ox_id); + sid_tmp = sli4_sid_from_fc_hdr(fc_hdr_tmp); + if (oxid_tmp != oxid || sid_tmp != sid) + continue; + + lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, + "6321 NVMET Rcv ABTS oxid x%x from x%x " + "is waiting for a ctxp\n", + oxid, sid); + + list_del_init(&nvmebuf->hbuf.list); + phba->sli4_hba.nvmet_io_wait_cnt--; + found = true; + break; + } + spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_wait_lock, + iflag); + + /* free buffer since already posted a new DMA buffer to RQ */ + if (found) { + nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf); + /* Respond with BA_ACC accordingly */ + lpfc_sli4_seq_abort_rsp(vport, fc_hdr, 1); + return 0; + } + } + + /* check active list */ + ctxp = lpfc_nvmet_get_ctx_for_oxid(phba, oxid, sid); + if (ctxp) { + xri = ctxp->ctxbuf->sglq->sli4_xritag; + + spin_lock_irqsave(&ctxp->ctxlock, iflag); + ctxp->flag |= (LPFC_NVMET_ABTS_RCV | LPFC_NVMET_ABORT_OP); + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + + lpfc_nvmeio_data(phba, + "NVMET ABTS RCV: xri x%x CPU %02x rjt %d\n", + xri, raw_smp_processor_id(), 0); + + lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, + "6322 NVMET Rcv ABTS:acc oxid x%x xri x%x " + "flag x%x state x%x\n", + ctxp->oxid, xri, ctxp->flag, ctxp->state); + + if (ctxp->flag & LPFC_NVMET_TNOTIFY) { + /* Notify the transport */ + nvmet_fc_rcv_fcp_abort(phba->targetport, + &ctxp->ctx.fcp_req); + } else { + cancel_work_sync(&ctxp->ctxbuf->defer_work); + spin_lock_irqsave(&ctxp->ctxlock, iflag); + lpfc_nvmet_defer_release(phba, ctxp); + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + } + if (ctxp->state == LPFC_NVMET_STE_RCV) + lpfc_nvmet_unsol_fcp_issue_abort(phba, ctxp, ctxp->sid, + ctxp->oxid); + else + lpfc_nvmet_sol_fcp_issue_abort(phba, ctxp, ctxp->sid, + ctxp->oxid); + + lpfc_sli4_seq_abort_rsp(vport, fc_hdr, 1); + return 0; + } + + lpfc_nvmeio_data(phba, "NVMET ABTS RCV: oxid x%x CPU %02x rjt %d\n", + oxid, raw_smp_processor_id(), 1); lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6320 NVMET Rcv ABTS:rjt xri x%x\n", xri); + "6320 NVMET Rcv ABTS:rjt oxid x%x\n", oxid); /* Respond with BA_RJT accordingly */ lpfc_sli4_seq_abort_rsp(vport, fc_hdr, 0); @@ -1714,6 +1889,18 @@ lpfc_nvmet_wqfull_process(struct lpfc_hba *phba, spin_unlock_irqrestore(&pring->ring_lock, iflags); return; } + if (rc == WQE_SUCCESS) { +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + if (ctxp->ts_cmd_nvme) { + if (ctxp->ctx.fcp_req.op == NVMET_FCOP_RSP) + ctxp->ts_status_wqput = ktime_get_ns(); + else + ctxp->ts_data_wqput = ktime_get_ns(); + } +#endif + } else { + WARN_ON(rc); + } } wq->q_flag &= ~HBA_NVMET_WQFULL; spin_unlock_irqrestore(&pring->ring_lock, iflags); @@ -1879,8 +2066,20 @@ lpfc_nvmet_process_rcv_fcp_req(struct lpfc_nvmet_ctxbuf *ctx_buf) return; } + if (ctxp->flag & LPFC_NVMET_ABTS_RCV) { + lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, + "6324 IO oxid x%x aborted\n", + ctxp->oxid); + return; + } + payload = (uint32_t *)(nvmebuf->dbuf.virt); tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private; + ctxp->flag |= LPFC_NVMET_TNOTIFY; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + if (ctxp->ts_isr_cmd) + ctxp->ts_cmd_nvme = ktime_get_ns(); +#endif /* * The calling sequence should be: * nvmet_fc_rcv_fcp_req->lpfc_nvmet_xmt_fcp_op/cmp- req->done @@ -1930,6 +2129,7 @@ lpfc_nvmet_process_rcv_fcp_req(struct lpfc_nvmet_ctxbuf *ctx_buf) phba->sli4_hba.nvmet_mrq_data[qno], 1, qno); return; } + ctxp->flag &= ~LPFC_NVMET_TNOTIFY; atomic_inc(&tgtp->rcv_fcp_cmd_drop); lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, "2582 FCP Drop IO x%x: err x%x: x%x x%x x%x\n", @@ -2019,6 +2219,8 @@ lpfc_nvmet_replenish_context(struct lpfc_hba *phba, * @phba: pointer to lpfc hba data structure. * @idx: relative index of MRQ vector * @nvmebuf: pointer to lpfc nvme command HBQ data structure. + * @isr_timestamp: in jiffies. + * @cqflag: cq processing information regarding workload. * * This routine is used for processing the WQE associated with a unsolicited * event. It first determines whether there is an existing ndlp that matches @@ -2031,7 +2233,8 @@ static void lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba, uint32_t idx, struct rqb_dmabuf *nvmebuf, - uint64_t isr_timestamp) + uint64_t isr_timestamp, + uint8_t cqflag) { struct lpfc_nvmet_rcv_ctx *ctxp; struct lpfc_nvmet_tgtport *tgtp; @@ -2118,6 +2321,9 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba, sid = sli4_sid_from_fc_hdr(fc_hdr); ctxp = (struct lpfc_nvmet_rcv_ctx *)ctx_buf->context; + spin_lock_irqsave(&phba->sli4_hba.t_active_list_lock, iflag); + list_add_tail(&ctxp->list, &phba->sli4_hba.t_active_ctx_list); + spin_unlock_irqrestore(&phba->sli4_hba.t_active_list_lock, iflag); if (ctxp->state != LPFC_NVMET_STE_FREE) { lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, "6414 NVMET Context corrupt %d %d oxid x%x\n", @@ -2140,24 +2346,41 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba, spin_lock_init(&ctxp->ctxlock); #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - if (isr_timestamp) { + if (isr_timestamp) ctxp->ts_isr_cmd = isr_timestamp; - ctxp->ts_cmd_nvme = ktime_get_ns(); - ctxp->ts_nvme_data = 0; - ctxp->ts_data_wqput = 0; - ctxp->ts_isr_data = 0; - ctxp->ts_data_nvme = 0; - ctxp->ts_nvme_status = 0; - ctxp->ts_status_wqput = 0; - ctxp->ts_isr_status = 0; - ctxp->ts_status_nvme = 0; - } else { - ctxp->ts_cmd_nvme = 0; - } + ctxp->ts_cmd_nvme = 0; + ctxp->ts_nvme_data = 0; + ctxp->ts_data_wqput = 0; + ctxp->ts_isr_data = 0; + ctxp->ts_data_nvme = 0; + ctxp->ts_nvme_status = 0; + ctxp->ts_status_wqput = 0; + ctxp->ts_isr_status = 0; + ctxp->ts_status_nvme = 0; #endif atomic_inc(&tgtp->rcv_fcp_cmd_in); - lpfc_nvmet_process_rcv_fcp_req(ctx_buf); + /* check for cq processing load */ + if (!cqflag) { + lpfc_nvmet_process_rcv_fcp_req(ctx_buf); + return; + } + + if (!queue_work(phba->wq, &ctx_buf->defer_work)) { + atomic_inc(&tgtp->rcv_fcp_cmd_drop); + lpfc_printf_log(phba, KERN_ERR, LOG_NVME, + "6325 Unable to queue work for oxid x%x. " + "FCP Drop IO [x%x x%x x%x]\n", + ctxp->oxid, + atomic_read(&tgtp->rcv_fcp_cmd_in), + atomic_read(&tgtp->rcv_fcp_cmd_out), + atomic_read(&tgtp->xmt_fcp_release)); + + spin_lock_irqsave(&ctxp->ctxlock, iflag); + lpfc_nvmet_defer_release(phba, ctxp); + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); + lpfc_nvmet_unsol_fcp_issue_abort(phba, ctxp, sid, oxid); + } } /** @@ -2194,6 +2417,8 @@ lpfc_nvmet_unsol_ls_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * @phba: pointer to lpfc hba data structure. * @idx: relative index of MRQ vector * @nvmebuf: pointer to received nvme data structure. + * @isr_timestamp: in jiffies. + * @cqflag: cq processing information regarding workload. * * This routine is used to process an unsolicited event received from a SLI * (Service Level Interface) ring. The actual processing of the data buffer @@ -2205,14 +2430,14 @@ void lpfc_nvmet_unsol_fcp_event(struct lpfc_hba *phba, uint32_t idx, struct rqb_dmabuf *nvmebuf, - uint64_t isr_timestamp) + uint64_t isr_timestamp, + uint8_t cqflag) { if (phba->nvmet_support == 0) { lpfc_rq_buf_free(phba, &nvmebuf->hbuf); return; } - lpfc_nvmet_unsol_fcp_buffer(phba, idx, nvmebuf, - isr_timestamp); + lpfc_nvmet_unsol_fcp_buffer(phba, idx, nvmebuf, isr_timestamp, cqflag); } /** @@ -2750,7 +2975,7 @@ lpfc_nvmet_sol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, if ((ctxp->flag & LPFC_NVMET_CTX_RLS) && !(ctxp->flag & LPFC_NVMET_XBUSY)) { spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock); - list_del(&ctxp->list); + list_del_init(&ctxp->list); spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); released = true; } @@ -2759,7 +2984,7 @@ lpfc_nvmet_sol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, atomic_inc(&tgtp->xmt_abort_rsp); lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6165 ABORT cmpl: xri x%x flg x%x (%d) " + "6165 ABORT cmpl: oxid x%x flg x%x (%d) " "WCQE: %08x %08x %08x %08x\n", ctxp->oxid, ctxp->flag, released, wcqe->word0, wcqe->total_data_placed, @@ -2834,7 +3059,7 @@ lpfc_nvmet_unsol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, if ((ctxp->flag & LPFC_NVMET_CTX_RLS) && !(ctxp->flag & LPFC_NVMET_XBUSY)) { spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock); - list_del(&ctxp->list); + list_del_init(&ctxp->list); spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); released = true; } @@ -2843,7 +3068,7 @@ lpfc_nvmet_unsol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, atomic_inc(&tgtp->xmt_abort_rsp); lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, - "6316 ABTS cmpl xri x%x flg x%x (%x) " + "6316 ABTS cmpl oxid x%x flg x%x (%x) " "WCQE: %08x %08x %08x %08x\n", ctxp->oxid, ctxp->flag, released, wcqe->word0, wcqe->total_data_placed, @@ -3214,7 +3439,7 @@ lpfc_nvmet_unsol_fcp_issue_abort(struct lpfc_hba *phba, spin_lock_irqsave(&ctxp->ctxlock, flags); if (ctxp->flag & LPFC_NVMET_CTX_RLS) { spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock); - list_del(&ctxp->list); + list_del_init(&ctxp->list); spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock); released = true; } @@ -3223,8 +3448,9 @@ lpfc_nvmet_unsol_fcp_issue_abort(struct lpfc_hba *phba, atomic_inc(&tgtp->xmt_abort_rsp_error); lpfc_printf_log(phba, KERN_ERR, LOG_NVME_ABTS, - "6135 Failed to Issue ABTS for oxid x%x. Status x%x\n", - ctxp->oxid, rc); + "6135 Failed to Issue ABTS for oxid x%x. Status x%x " + "(%x)\n", + ctxp->oxid, rc, released); if (released) lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf); return 1; diff --git a/drivers/scsi/lpfc/lpfc_nvmet.h b/drivers/scsi/lpfc/lpfc_nvmet.h index 2f3f603d94c4..8ff67deac10a 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.h +++ b/drivers/scsi/lpfc/lpfc_nvmet.h @@ -140,6 +140,7 @@ struct lpfc_nvmet_rcv_ctx { #define LPFC_NVMET_ABTS_RCV 0x10 /* ABTS received on exchange */ #define LPFC_NVMET_CTX_REUSE_WQ 0x20 /* ctx reused via WQ */ #define LPFC_NVMET_DEFER_WQFULL 0x40 /* Waiting on a free WQE */ +#define LPFC_NVMET_TNOTIFY 0x80 /* notify transport of abts */ struct rqb_dmabuf *rqb_buffer; struct lpfc_nvmet_ctxbuf *ctxbuf; struct lpfc_sli4_hdw_queue *hdwq; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index ba996fbde89b..f9df800e7067 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -3879,10 +3879,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, */ spin_lock(&lpfc_cmd->buf_lock); lpfc_cmd->cur_iocbq.iocb_flag &= ~LPFC_DRIVER_ABORTED; - if (lpfc_cmd->waitq) { + if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - lpfc_cmd->waitq = NULL; - } spin_unlock(&lpfc_cmd->buf_lock); lpfc_release_scsi_buf(phba, lpfc_cmd); @@ -4718,6 +4716,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) iocb->sli4_xritag, ret, cmnd->device->id, cmnd->device->lun); } + + lpfc_cmd->waitq = NULL; + spin_unlock(&lpfc_cmd->buf_lock); goto out; @@ -4797,7 +4798,12 @@ lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_io_buf *lpfc_cmd) rsp_info, rsp_len, rsp_info_code); - if ((fcprsp->rspStatus2&RSP_LEN_VALID) && (rsp_len == 8)) { + /* If FCP_RSP_LEN_VALID bit is one, then the FCP_RSP_LEN + * field specifies the number of valid bytes of FCP_RSP_INFO. + * The FCP_RSP_LEN field shall be set to 0x04 or 0x08 + */ + if ((fcprsp->rspStatus2 & RSP_LEN_VALID) && + ((rsp_len == 8) || (rsp_len == 4))) { switch (rsp_info_code) { case RSP_NO_FAILURE: lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, @@ -5741,7 +5747,7 @@ lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, /* Create an lun info structure and add to list of luns */ lun_info = lpfc_create_device_data(phba, vport_wwpn, target_wwpn, lun, - pri, false); + pri, true); if (lun_info) { lun_info->oas_enabled = true; lun_info->priority = pri; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4329cc44bb55..f9e6a135d656 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -108,7 +108,7 @@ lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq) * endianness. This function can be called with or without * lock. **/ -void +static void lpfc_sli4_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) { uint64_t *src = srcp; @@ -5571,6 +5571,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) int qidx; struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba; struct lpfc_sli4_hdw_queue *qp; + struct lpfc_queue *eq; sli4_hba->sli4_write_cq_db(phba, sli4_hba->mbx_cq, 0, LPFC_QUEUE_REARM); sli4_hba->sli4_write_cq_db(phba, sli4_hba->els_cq, 0, LPFC_QUEUE_REARM); @@ -5578,18 +5579,24 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) sli4_hba->sli4_write_cq_db(phba, sli4_hba->nvmels_cq, 0, LPFC_QUEUE_REARM); - qp = sli4_hba->hdwq; if (sli4_hba->hdwq) { + /* Loop thru all Hardware Queues */ for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { - sli4_hba->sli4_write_cq_db(phba, qp[qidx].fcp_cq, 0, + qp = &sli4_hba->hdwq[qidx]; + /* ARM the corresponding CQ */ + sli4_hba->sli4_write_cq_db(phba, qp->fcp_cq, 0, LPFC_QUEUE_REARM); - sli4_hba->sli4_write_cq_db(phba, qp[qidx].nvme_cq, 0, + sli4_hba->sli4_write_cq_db(phba, qp->nvme_cq, 0, LPFC_QUEUE_REARM); } - for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) - sli4_hba->sli4_write_eq_db(phba, qp[qidx].hba_eq, - 0, LPFC_QUEUE_REARM); + /* Loop thru all IRQ vectors */ + for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { + eq = sli4_hba->hba_eq_hdl[qidx].eq; + /* ARM the corresponding EQ */ + sli4_hba->sli4_write_eq_db(phba, eq, + 0, LPFC_QUEUE_REARM); + } } if (phba->nvmet_support) { @@ -7875,26 +7882,28 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba) * and will process all the completions associated with the eq for the * mailbox completion queue. **/ -bool +static bool lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba) { struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba; uint32_t eqidx; struct lpfc_queue *fpeq = NULL; + struct lpfc_queue *eq; bool mbox_pending; if (unlikely(!phba) || (phba->sli_rev != LPFC_SLI_REV4)) return false; - /* Find the eq associated with the mcq */ - - if (sli4_hba->hdwq) - for (eqidx = 0; eqidx < phba->cfg_irq_chann; eqidx++) - if (sli4_hba->hdwq[eqidx].hba_eq->queue_id == - sli4_hba->mbx_cq->assoc_qid) { - fpeq = sli4_hba->hdwq[eqidx].hba_eq; + /* Find the EQ associated with the mbox CQ */ + if (sli4_hba->hdwq) { + for (eqidx = 0; eqidx < phba->cfg_irq_chann; eqidx++) { + eq = phba->sli4_hba.hba_eq_hdl[eqidx].eq; + if (eq->queue_id == sli4_hba->mbx_cq->assoc_qid) { + fpeq = eq; break; } + } + } if (!fpeq) return false; @@ -13605,14 +13614,9 @@ __lpfc_sli4_process_cq(struct lpfc_hba *phba, struct lpfc_queue *cq, goto rearm_and_exit; /* Process all the entries to the CQ */ + cq->q_flag = 0; cqe = lpfc_sli4_cq_get(cq); while (cqe) { -#if defined(CONFIG_SCSI_LPFC_DEBUG_FS) && defined(BUILD_NVME) - if (phba->ktime_on) - cq->isr_timestamp = ktime_get_ns(); - else - cq->isr_timestamp = 0; -#endif workposted |= handler(phba, cq, cqe); __lpfc_sli4_consume_cqe(phba, cq, cqe); @@ -13626,6 +13630,9 @@ __lpfc_sli4_process_cq(struct lpfc_hba *phba, struct lpfc_queue *cq, consumed = 0; } + if (count == LPFC_NVMET_CQ_NOTIFY) + cq->q_flag |= HBA_NVMET_CQ_NOTIFY; + cqe = lpfc_sli4_cq_get(cq); } if (count >= phba->cfg_cq_poll_threshold) { @@ -13941,10 +13948,10 @@ lpfc_sli4_nvmet_handle_rcqe(struct lpfc_hba *phba, struct lpfc_queue *cq, goto drop; if (fc_hdr->fh_type == FC_TYPE_FCP) { - dma_buf->bytes_recv = bf_get(lpfc_rcqe_length, rcqe); + dma_buf->bytes_recv = bf_get(lpfc_rcqe_length, rcqe); lpfc_nvmet_unsol_fcp_event( - phba, idx, dma_buf, - cq->isr_timestamp); + phba, idx, dma_buf, cq->isr_timestamp, + cq->q_flag & HBA_NVMET_CQ_NOTIFY); return false; } drop: @@ -14110,6 +14117,12 @@ lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba, struct lpfc_queue *eq, } work_cq: +#if defined(CONFIG_SCSI_LPFC_DEBUG_FS) + if (phba->ktime_on) + cq->isr_timestamp = ktime_get_ns(); + else + cq->isr_timestamp = 0; +#endif if (!queue_work_on(cq->chann, phba->wq, &cq->irqwork)) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0363 Cannot schedule soft IRQ " @@ -14236,7 +14249,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id) return IRQ_NONE; /* Get to the EQ struct associated with this vector */ - fpeq = phba->sli4_hba.hdwq[hba_eqidx].hba_eq; + fpeq = phba->sli4_hba.hba_eq_hdl[hba_eqidx].eq; if (unlikely(!fpeq)) return IRQ_NONE; @@ -14521,7 +14534,7 @@ lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq, /* set values by EQ_DELAY register if supported */ if (phba->sli.sli_flag & LPFC_SLI_USE_EQDR) { for (qidx = startq; qidx < phba->cfg_irq_chann; qidx++) { - eq = phba->sli4_hba.hdwq[qidx].hba_eq; + eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; if (!eq) continue; @@ -14530,7 +14543,6 @@ lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq, if (++cnt >= numq) break; } - return; } @@ -14558,7 +14570,7 @@ lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq, dmult = LPFC_DMULT_MAX; for (qidx = startq; qidx < phba->cfg_irq_chann; qidx++) { - eq = phba->sli4_hba.hdwq[qidx].hba_eq; + eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; if (!eq) continue; eq->q_mode = usdelay; @@ -14660,8 +14672,10 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0360 Unsupported EQ count. (%d)\n", eq->entry_count); - if (eq->entry_count < 256) - return -EINVAL; + if (eq->entry_count < 256) { + status = -EINVAL; + goto out; + } /* fall through - otherwise default to smallest count */ case 256: bf_set(lpfc_eq_context_count, &eq_create->u.request.context, @@ -14713,7 +14727,7 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax) eq->host_index = 0; eq->notify_interval = LPFC_EQ_NOTIFY_INTRVL; eq->max_proc_limit = LPFC_EQ_MAX_PROC_LIMIT; - +out: mempool_free(mbox, phba->mbox_mem_pool); return status; } diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 8e4fd1a98023..3aeca387b22a 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -197,6 +197,8 @@ struct lpfc_queue { #define LPFC_DB_LIST_FORMAT 0x02 uint8_t q_flag; #define HBA_NVMET_WQFULL 0x1 /* We hit WQ Full condition for NVMET */ +#define HBA_NVMET_CQ_NOTIFY 0x1 /* LPFC_NVMET_CQ_NOTIFY CQEs this EQE */ +#define LPFC_NVMET_CQ_NOTIFY 4 void __iomem *db_regaddr; uint16_t dpp_enable; uint16_t dpp_id; @@ -450,6 +452,7 @@ struct lpfc_hba_eq_hdl { uint32_t idx; char handler_name[LPFC_SLI4_HANDLER_NAME_SZ]; struct lpfc_hba *phba; + struct lpfc_queue *eq; }; /*BB Credit recovery value*/ @@ -512,6 +515,7 @@ struct lpfc_pc_sli4_params { #define LPFC_WQ_SZ64_SUPPORT 1 #define LPFC_WQ_SZ128_SUPPORT 2 uint8_t wqpcnt; + uint8_t nvme; }; #define LPFC_CQ_4K_PAGE_SZ 0x1 @@ -546,7 +550,10 @@ struct lpfc_vector_map_info { uint16_t irq; uint16_t eq; uint16_t hdwq; - uint16_t hyper; + uint16_t flag; +#define LPFC_CPU_MAP_HYPER 0x1 +#define LPFC_CPU_MAP_UNASSIGN 0x2 +#define LPFC_CPU_FIRST_IRQ 0x4 }; #define LPFC_VECTOR_MAP_EMPTY 0xffff @@ -843,6 +850,8 @@ struct lpfc_sli4_hba { struct list_head lpfc_nvmet_sgl_list; spinlock_t abts_nvmet_buf_list_lock; /* list of aborted NVMET IOs */ struct list_head lpfc_abts_nvmet_ctx_list; + spinlock_t t_active_list_lock; /* list of active NVMET IOs */ + struct list_head t_active_ctx_list; struct list_head lpfc_nvmet_io_wait_list; struct lpfc_nvmet_ctx_info *nvmet_ctx_info; struct lpfc_sglq **lpfc_sglq_active_list; diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 220a932fe943..f7e93aaf1e00 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -20,7 +20,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "12.2.0.2" +#define LPFC_DRIVER_VERSION "12.2.0.3" #define LPFC_DRIVER_NAME "lpfc" /* Used for SLI 2/3 */ diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index dba9517d9553..9c5566217ef6 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -4,6 +4,8 @@ * * Copyright 1998, Michael Schmitz * + * Copyright 2019 Finn Thain + * * derived in part from: */ /* @@ -12,6 +14,7 @@ * Copyright 1995, Russell King */ +#include #include #include #include @@ -22,6 +25,7 @@ #include #include +#include #include #include @@ -53,7 +57,7 @@ static int setup_cmd_per_lun = -1; module_param(setup_cmd_per_lun, int, 0); static int setup_sg_tablesize = -1; module_param(setup_sg_tablesize, int, 0); -static int setup_use_pdma = -1; +static int setup_use_pdma = 512; module_param(setup_use_pdma, int, 0); static int setup_hostid = -1; module_param(setup_hostid, int, 0); @@ -90,223 +94,318 @@ static int __init mac_scsi_setup(char *str) __setup("mac5380=", mac_scsi_setup); #endif /* !MODULE */ -/* Pseudo DMA asm originally by Ove Edlund */ +/* + * According to "Inside Macintosh: Devices", Mac OS requires disk drivers to + * specify the number of bytes between the delays expected from a SCSI target. + * This allows the operating system to "prevent bus errors when a target fails + * to deliver the next byte within the processor bus error timeout period." + * Linux SCSI drivers lack knowledge of the timing behaviour of SCSI targets + * so bus errors are unavoidable. + * + * If a MOVE.B instruction faults, we assume that zero bytes were transferred + * and simply retry. That assumption probably depends on target behaviour but + * seems to hold up okay. The NOP provides synchronization: without it the + * fault can sometimes occur after the program counter has moved past the + * offending instruction. Post-increment addressing can't be used. + */ -#define CP_IO_TO_MEM(s,d,n) \ -__asm__ __volatile__ \ - (" cmp.w #4,%2\n" \ - " bls 8f\n" \ - " move.w %1,%%d0\n" \ - " neg.b %%d0\n" \ - " and.w #3,%%d0\n" \ - " sub.w %%d0,%2\n" \ - " bra 2f\n" \ - " 1: move.b (%0),(%1)+\n" \ - " 2: dbf %%d0,1b\n" \ - " move.w %2,%%d0\n" \ - " lsr.w #5,%%d0\n" \ - " bra 4f\n" \ - " 3: move.l (%0),(%1)+\n" \ - "31: move.l (%0),(%1)+\n" \ - "32: move.l (%0),(%1)+\n" \ - "33: move.l (%0),(%1)+\n" \ - "34: move.l (%0),(%1)+\n" \ - "35: move.l (%0),(%1)+\n" \ - "36: move.l (%0),(%1)+\n" \ - "37: move.l (%0),(%1)+\n" \ - " 4: dbf %%d0,3b\n" \ - " move.w %2,%%d0\n" \ - " lsr.w #2,%%d0\n" \ - " and.w #7,%%d0\n" \ - " bra 6f\n" \ - " 5: move.l (%0),(%1)+\n" \ - " 6: dbf %%d0,5b\n" \ - " and.w #3,%2\n" \ - " bra 8f\n" \ - " 7: move.b (%0),(%1)+\n" \ - " 8: dbf %2,7b\n" \ - " moveq.l #0, %2\n" \ - " 9: \n" \ - ".section .fixup,\"ax\"\n" \ - " .even\n" \ - "91: moveq.l #1, %2\n" \ - " jra 9b\n" \ - "94: moveq.l #4, %2\n" \ - " jra 9b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,91b\n" \ - " .long 3b,94b\n" \ - " .long 31b,94b\n" \ - " .long 32b,94b\n" \ - " .long 33b,94b\n" \ - " .long 34b,94b\n" \ - " .long 35b,94b\n" \ - " .long 36b,94b\n" \ - " .long 37b,94b\n" \ - " .long 5b,94b\n" \ - " .long 7b,91b\n" \ - ".previous" \ - : "=a"(s), "=a"(d), "=d"(n) \ - : "0"(s), "1"(d), "2"(n) \ - : "d0") +#define MOVE_BYTE(operands) \ + asm volatile ( \ + "1: moveb " operands " \n" \ + "11: nop \n" \ + " addq #1,%0 \n" \ + " subq #1,%1 \n" \ + "40: \n" \ + " \n" \ + ".section .fixup,\"ax\" \n" \ + ".even \n" \ + "90: movel #1, %2 \n" \ + " jra 40b \n" \ + ".previous \n" \ + " \n" \ + ".section __ex_table,\"a\" \n" \ + ".align 4 \n" \ + ".long 1b,90b \n" \ + ".long 11b,90b \n" \ + ".previous \n" \ + : "+a" (addr), "+r" (n), "+r" (result) : "a" (io)) + +/* + * If a MOVE.W (or MOVE.L) instruction faults, it cannot be retried because + * the residual byte count would be uncertain. In that situation the MOVE_WORD + * macro clears n in the fixup section to abort the transfer. + */ + +#define MOVE_WORD(operands) \ + asm volatile ( \ + "1: movew " operands " \n" \ + "11: nop \n" \ + " subq #2,%1 \n" \ + "40: \n" \ + " \n" \ + ".section .fixup,\"ax\" \n" \ + ".even \n" \ + "90: movel #0, %1 \n" \ + " movel #2, %2 \n" \ + " jra 40b \n" \ + ".previous \n" \ + " \n" \ + ".section __ex_table,\"a\" \n" \ + ".align 4 \n" \ + ".long 1b,90b \n" \ + ".long 11b,90b \n" \ + ".previous \n" \ + : "+a" (addr), "+r" (n), "+r" (result) : "a" (io)) + +#define MOVE_16_WORDS(operands) \ + asm volatile ( \ + "1: movew " operands " \n" \ + "2: movew " operands " \n" \ + "3: movew " operands " \n" \ + "4: movew " operands " \n" \ + "5: movew " operands " \n" \ + "6: movew " operands " \n" \ + "7: movew " operands " \n" \ + "8: movew " operands " \n" \ + "9: movew " operands " \n" \ + "10: movew " operands " \n" \ + "11: movew " operands " \n" \ + "12: movew " operands " \n" \ + "13: movew " operands " \n" \ + "14: movew " operands " \n" \ + "15: movew " operands " \n" \ + "16: movew " operands " \n" \ + "17: nop \n" \ + " subl #32,%1 \n" \ + "40: \n" \ + " \n" \ + ".section .fixup,\"ax\" \n" \ + ".even \n" \ + "90: movel #0, %1 \n" \ + " movel #2, %2 \n" \ + " jra 40b \n" \ + ".previous \n" \ + " \n" \ + ".section __ex_table,\"a\" \n" \ + ".align 4 \n" \ + ".long 1b,90b \n" \ + ".long 2b,90b \n" \ + ".long 3b,90b \n" \ + ".long 4b,90b \n" \ + ".long 5b,90b \n" \ + ".long 6b,90b \n" \ + ".long 7b,90b \n" \ + ".long 8b,90b \n" \ + ".long 9b,90b \n" \ + ".long 10b,90b \n" \ + ".long 11b,90b \n" \ + ".long 12b,90b \n" \ + ".long 13b,90b \n" \ + ".long 14b,90b \n" \ + ".long 15b,90b \n" \ + ".long 16b,90b \n" \ + ".long 17b,90b \n" \ + ".previous \n" \ + : "+a" (addr), "+r" (n), "+r" (result) : "a" (io)) + +#define MAC_PDMA_DELAY 32 + +static inline int mac_pdma_recv(void __iomem *io, unsigned char *start, int n) +{ + unsigned char *addr = start; + int result = 0; + + if (n >= 1) { + MOVE_BYTE("%3@,%0@"); + if (result) + goto out; + } + if (n >= 1 && ((unsigned long)addr & 1)) { + MOVE_BYTE("%3@,%0@"); + if (result) + goto out; + } + while (n >= 32) + MOVE_16_WORDS("%3@,%0@+"); + while (n >= 2) + MOVE_WORD("%3@,%0@+"); + if (result) + return start - addr; /* Negated to indicate uncertain length */ + if (n == 1) + MOVE_BYTE("%3@,%0@"); +out: + return addr - start; +} + +static inline int mac_pdma_send(unsigned char *start, void __iomem *io, int n) +{ + unsigned char *addr = start; + int result = 0; + + if (n >= 1) { + MOVE_BYTE("%0@,%3@"); + if (result) + goto out; + } + if (n >= 1 && ((unsigned long)addr & 1)) { + MOVE_BYTE("%0@,%3@"); + if (result) + goto out; + } + while (n >= 32) + MOVE_16_WORDS("%0@+,%3@"); + while (n >= 2) + MOVE_WORD("%0@+,%3@"); + if (result) + return start - addr; /* Negated to indicate uncertain length */ + if (n == 1) + MOVE_BYTE("%0@,%3@"); +out: + return addr - start; +} + +/* The "SCSI DMA" chip on the IIfx implements this register. */ +#define CTRL_REG 0x8 +#define CTRL_INTERRUPTS_ENABLE BIT(1) +#define CTRL_HANDSHAKE_MODE BIT(3) + +static inline void write_ctrl_reg(struct NCR5380_hostdata *hostdata, u32 value) +{ + out_be32(hostdata->io + (CTRL_REG << 4), value); +} static inline int macscsi_pread(struct NCR5380_hostdata *hostdata, unsigned char *dst, int len) { u8 __iomem *s = hostdata->pdma_io + (INPUT_DATA_REG << 4); unsigned char *d = dst; - int n = len; - int transferred; + int result = 0; + + hostdata->pdma_residual = len; while (!NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_DRQ | BASR_PHASE_MATCH, BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) { - CP_IO_TO_MEM(s, d, n); + int bytes; - transferred = d - dst - n; - hostdata->pdma_residual = len - transferred; + if (macintosh_config->ident == MAC_MODEL_IIFX) + write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE | + CTRL_INTERRUPTS_ENABLE); - /* No bus error. */ - if (n == 0) - return 0; + bytes = mac_pdma_recv(s, d, min(hostdata->pdma_residual, 512)); + + if (bytes > 0) { + d += bytes; + hostdata->pdma_residual -= bytes; + } + + if (hostdata->pdma_residual == 0) + goto out; - /* Target changed phase early? */ if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ, - BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0) - scmd_printk(KERN_ERR, hostdata->connected, + BUS_AND_STATUS_REG, BASR_ACK, + BASR_ACK, HZ / 64) < 0) + scmd_printk(KERN_DEBUG, hostdata->connected, "%s: !REQ and !ACK\n", __func__); if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) - return 0; + goto out; + + if (bytes == 0) + udelay(MAC_PDMA_DELAY); + + if (bytes >= 0) + continue; dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host, - "%s: bus error (%d/%d)\n", __func__, transferred, len); + "%s: bus error (%d/%d)\n", __func__, d - dst, len); NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host); - d = dst + transferred; - n = len - transferred; + result = -1; + goto out; } scmd_printk(KERN_ERR, hostdata->connected, "%s: phase mismatch or !DRQ\n", __func__); NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host); - return -1; + result = -1; +out: + if (macintosh_config->ident == MAC_MODEL_IIFX) + write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE); + return result; } - -#define CP_MEM_TO_IO(s,d,n) \ -__asm__ __volatile__ \ - (" cmp.w #4,%2\n" \ - " bls 8f\n" \ - " move.w %0,%%d0\n" \ - " neg.b %%d0\n" \ - " and.w #3,%%d0\n" \ - " sub.w %%d0,%2\n" \ - " bra 2f\n" \ - " 1: move.b (%0)+,(%1)\n" \ - " 2: dbf %%d0,1b\n" \ - " move.w %2,%%d0\n" \ - " lsr.w #5,%%d0\n" \ - " bra 4f\n" \ - " 3: move.l (%0)+,(%1)\n" \ - "31: move.l (%0)+,(%1)\n" \ - "32: move.l (%0)+,(%1)\n" \ - "33: move.l (%0)+,(%1)\n" \ - "34: move.l (%0)+,(%1)\n" \ - "35: move.l (%0)+,(%1)\n" \ - "36: move.l (%0)+,(%1)\n" \ - "37: move.l (%0)+,(%1)\n" \ - " 4: dbf %%d0,3b\n" \ - " move.w %2,%%d0\n" \ - " lsr.w #2,%%d0\n" \ - " and.w #7,%%d0\n" \ - " bra 6f\n" \ - " 5: move.l (%0)+,(%1)\n" \ - " 6: dbf %%d0,5b\n" \ - " and.w #3,%2\n" \ - " bra 8f\n" \ - " 7: move.b (%0)+,(%1)\n" \ - " 8: dbf %2,7b\n" \ - " moveq.l #0, %2\n" \ - " 9: \n" \ - ".section .fixup,\"ax\"\n" \ - " .even\n" \ - "91: moveq.l #1, %2\n" \ - " jra 9b\n" \ - "94: moveq.l #4, %2\n" \ - " jra 9b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,91b\n" \ - " .long 3b,94b\n" \ - " .long 31b,94b\n" \ - " .long 32b,94b\n" \ - " .long 33b,94b\n" \ - " .long 34b,94b\n" \ - " .long 35b,94b\n" \ - " .long 36b,94b\n" \ - " .long 37b,94b\n" \ - " .long 5b,94b\n" \ - " .long 7b,91b\n" \ - ".previous" \ - : "=a"(s), "=a"(d), "=d"(n) \ - : "0"(s), "1"(d), "2"(n) \ - : "d0") - static inline int macscsi_pwrite(struct NCR5380_hostdata *hostdata, unsigned char *src, int len) { unsigned char *s = src; u8 __iomem *d = hostdata->pdma_io + (OUTPUT_DATA_REG << 4); - int n = len; - int transferred; + int result = 0; + + hostdata->pdma_residual = len; while (!NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_DRQ | BASR_PHASE_MATCH, BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) { - CP_MEM_TO_IO(s, d, n); + int bytes; - transferred = s - src - n; - hostdata->pdma_residual = len - transferred; + if (macintosh_config->ident == MAC_MODEL_IIFX) + write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE | + CTRL_INTERRUPTS_ENABLE); - /* Target changed phase early? */ - if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ, - BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0) - scmd_printk(KERN_ERR, hostdata->connected, - "%s: !REQ and !ACK\n", __func__); - if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) - return 0; + bytes = mac_pdma_send(s, d, min(hostdata->pdma_residual, 512)); - /* No bus error. */ - if (n == 0) { - if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG, - TCR_LAST_BYTE_SENT, - TCR_LAST_BYTE_SENT, HZ / 64) < 0) - scmd_printk(KERN_ERR, hostdata->connected, - "%s: Last Byte Sent timeout\n", __func__); - return 0; + if (bytes > 0) { + s += bytes; + hostdata->pdma_residual -= bytes; } + if (hostdata->pdma_residual == 0) { + if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG, + TCR_LAST_BYTE_SENT, + TCR_LAST_BYTE_SENT, + HZ / 64) < 0) { + scmd_printk(KERN_ERR, hostdata->connected, + "%s: Last Byte Sent timeout\n", __func__); + result = -1; + } + goto out; + } + + if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ, + BUS_AND_STATUS_REG, BASR_ACK, + BASR_ACK, HZ / 64) < 0) + scmd_printk(KERN_DEBUG, hostdata->connected, + "%s: !REQ and !ACK\n", __func__); + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) + goto out; + + if (bytes == 0) + udelay(MAC_PDMA_DELAY); + + if (bytes >= 0) + continue; + dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host, - "%s: bus error (%d/%d)\n", __func__, transferred, len); + "%s: bus error (%d/%d)\n", __func__, s - src, len); NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host); - s = src + transferred; - n = len - transferred; + result = -1; + goto out; } scmd_printk(KERN_ERR, hostdata->connected, "%s: phase mismatch or !DRQ\n", __func__); NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host); - - return -1; + result = -1; +out: + if (macintosh_config->ident == MAC_MODEL_IIFX) + write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE); + return result; } static int macscsi_dma_xfer_len(struct NCR5380_hostdata *hostdata, struct scsi_cmnd *cmd) { if (hostdata->flags & FLAG_NO_PSEUDO_DMA || - cmd->SCp.this_residual < 16) + cmd->SCp.this_residual < setup_use_pdma) return 0; return cmd->SCp.this_residual; diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid index e630e41dc843..2adc2afd9f91 100644 --- a/drivers/scsi/megaraid/Kconfig.megaraid +++ b/drivers/scsi/megaraid/Kconfig.megaraid @@ -79,6 +79,7 @@ config MEGARAID_LEGACY config MEGARAID_SAS tristate "LSI Logic MegaRAID SAS RAID Module" depends on PCI && SCSI + select IRQ_POLL help Module for LSI Logic's SAS based RAID controllers. To compile this driver as a module, choose 'm' here. diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile index 6e74d21227a5..12177e4cae65 100644 --- a/drivers/scsi/megaraid/Makefile +++ b/drivers/scsi/megaraid/Makefile @@ -3,4 +3,4 @@ obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o megaraid_sas-objs := megaraid_sas_base.o megaraid_sas_fusion.o \ - megaraid_sas_fp.o + megaraid_sas_fp.o megaraid_sas_debugfs.o diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index fe9a785b7b6f..ca724fe91b8d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -21,8 +21,8 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "07.707.51.00-rc1" -#define MEGASAS_RELDATE "February 7, 2019" +#define MEGASAS_VERSION "07.710.06.00-rc1" +#define MEGASAS_RELDATE "June 18, 2019" /* * Device IDs @@ -52,6 +52,10 @@ #define PCI_DEVICE_ID_LSI_AERO_10E2 0x10e2 #define PCI_DEVICE_ID_LSI_AERO_10E5 0x10e5 #define PCI_DEVICE_ID_LSI_AERO_10E6 0x10e6 +#define PCI_DEVICE_ID_LSI_AERO_10E0 0x10e0 +#define PCI_DEVICE_ID_LSI_AERO_10E3 0x10e3 +#define PCI_DEVICE_ID_LSI_AERO_10E4 0x10e4 +#define PCI_DEVICE_ID_LSI_AERO_10E7 0x10e7 /* * Intel HBA SSDIDs @@ -123,6 +127,8 @@ #define MFI_RESET_ADAPTER 0x00000002 #define MEGAMFI_FRAME_SIZE 64 +#define MFI_STATE_FAULT_CODE 0x0FFF0000 +#define MFI_STATE_FAULT_SUBCODE 0x0000FF00 /* * During FW init, clear pending cmds & reset state using inbound_msg_0 * @@ -190,6 +196,7 @@ enum MFI_CMD_OP { MFI_CMD_SMP = 0x7, MFI_CMD_STP = 0x8, MFI_CMD_NVME = 0x9, + MFI_CMD_TOOLBOX = 0xa, MFI_CMD_OP_COUNT, MFI_CMD_INVALID = 0xff }; @@ -1449,7 +1456,39 @@ struct megasas_ctrl_info { u8 reserved6[64]; - u32 rsvdForAdptOp[64]; + struct { + #if defined(__BIG_ENDIAN_BITFIELD) + u32 reserved:19; + u32 support_pci_lane_margining: 1; + u32 support_psoc_update:1; + u32 support_force_personality_change:1; + u32 support_fde_type_mix:1; + u32 support_snap_dump:1; + u32 support_nvme_tm:1; + u32 support_oce_only:1; + u32 support_ext_mfg_vpd:1; + u32 support_pcie:1; + u32 support_cvhealth_info:1; + u32 support_profile_change:2; + u32 mr_config_ext2_supported:1; + #else + u32 mr_config_ext2_supported:1; + u32 support_profile_change:2; + u32 support_cvhealth_info:1; + u32 support_pcie:1; + u32 support_ext_mfg_vpd:1; + u32 support_oce_only:1; + u32 support_nvme_tm:1; + u32 support_snap_dump:1; + u32 support_fde_type_mix:1; + u32 support_force_personality_change:1; + u32 support_psoc_update:1; + u32 support_pci_lane_margining: 1; + u32 reserved:19; + #endif + } adapter_operations5; + + u32 rsvdForAdptOp[63]; u8 reserved7[3]; @@ -1483,7 +1522,9 @@ struct megasas_ctrl_info { #define MEGASAS_FW_BUSY 1 /* Driver's internal Logging levels*/ -#define OCR_LOGS (1 << 0) +#define OCR_DEBUG (1 << 0) +#define TM_DEBUG (1 << 1) +#define LD_PD_DEBUG (1 << 2) #define SCAN_PD_CHANNEL 0x1 #define SCAN_VD_CHANNEL 0x2 @@ -1559,6 +1600,7 @@ enum FW_BOOT_CONTEXT { #define MFI_IO_TIMEOUT_SECS 180 #define MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF (5 * HZ) #define MEGASAS_OCR_SETTLE_TIME_VF (1000 * 30) +#define MEGASAS_SRIOV_MAX_RESET_TRIES_VF 1 #define MEGASAS_ROUTINE_WAIT_TIME_VF 300 #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 #define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001 @@ -1583,7 +1625,10 @@ enum FW_BOOT_CONTEXT { #define MR_CAN_HANDLE_SYNC_CACHE_OFFSET 0X01000000 +#define MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET (1 << 24) + #define MR_CAN_HANDLE_64_BIT_DMA_OFFSET (1 << 25) +#define MR_INTR_COALESCING_SUPPORT_OFFSET (1 << 26) #define MEGASAS_WATCHDOG_THREAD_INTERVAL 1000 #define MEGASAS_WAIT_FOR_NEXT_DMA_MSECS 20 @@ -1762,7 +1807,7 @@ struct megasas_init_frame { __le32 pad_0; /*0Ch */ __le16 flags; /*10h */ - __le16 reserved_3; /*12h */ + __le16 replyqueue_mask; /*12h */ __le32 data_xfer_len; /*14h */ __le32 queue_info_new_phys_addr_lo; /*18h */ @@ -2160,6 +2205,10 @@ struct megasas_aen_event { struct megasas_irq_context { struct megasas_instance *instance; u32 MSIxIndex; + u32 os_irq; + struct irq_poll irqpoll; + bool irq_poll_scheduled; + bool irq_line_enable; }; struct MR_DRV_SYSTEM_INFO { @@ -2190,6 +2239,23 @@ enum MR_PD_TYPE { #define MR_DEFAULT_NVME_MDTS_KB 128 #define MR_NVME_PAGE_SIZE_MASK 0x000000FF +/*Aero performance parameters*/ +#define MR_HIGH_IOPS_QUEUE_COUNT 8 +#define MR_DEVICE_HIGH_IOPS_DEPTH 8 +#define MR_HIGH_IOPS_BATCH_COUNT 16 + +enum MR_PERF_MODE { + MR_BALANCED_PERF_MODE = 0, + MR_IOPS_PERF_MODE = 1, + MR_LATENCY_PERF_MODE = 2, +}; + +#define MEGASAS_PERF_MODE_2STR(mode) \ + ((mode) == MR_BALANCED_PERF_MODE ? "Balanced" : \ + (mode) == MR_IOPS_PERF_MODE ? "IOPS" : \ + (mode) == MR_LATENCY_PERF_MODE ? "Latency" : \ + "Unknown") + struct megasas_instance { unsigned int *reply_map; @@ -2246,6 +2312,7 @@ struct megasas_instance { u32 secure_jbod_support; u32 support_morethan256jbod; /* FW support for more than 256 PD/JBOD */ bool use_seqnum_jbod_fp; /* Added for PD sequence */ + bool smp_affinity_enable; spinlock_t crashdump_lock; struct megasas_register_set __iomem *reg_set; @@ -2263,6 +2330,7 @@ struct megasas_instance { u16 ldio_threshold; u16 cur_can_queue; u32 max_sectors_per_req; + bool msix_load_balance; struct megasas_aen_event *ev; struct megasas_cmd **cmd_list; @@ -2290,15 +2358,13 @@ struct megasas_instance { struct pci_dev *pdev; u32 unique_id; u32 fw_support_ieee; + u32 threshold_reply_count; atomic_t fw_outstanding; atomic_t ldio_outstanding; atomic_t fw_reset_no_pci_access; - atomic_t ieee_sgl; - atomic_t prp_sgl; - atomic_t sge_holes_type1; - atomic_t sge_holes_type2; - atomic_t sge_holes_type3; + atomic64_t total_io_count; + atomic64_t high_iops_outstanding; struct megasas_instance_template *instancet; struct tasklet_struct isr_tasklet; @@ -2366,8 +2432,18 @@ struct megasas_instance { u8 task_abort_tmo; u8 max_reset_tmo; u8 snapdump_wait_time; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; + struct dentry *raidmap_dump; +#endif u8 enable_fw_dev_list; + bool atomic_desc_support; + bool support_seqnum_jbod_fp; + bool support_pci_lane_margining; + u8 low_latency_index_start; + int perf_mode; }; + struct MR_LD_VF_MAP { u32 size; union MR_LD_REF ref; @@ -2623,4 +2699,9 @@ void megasas_fusion_stop_watchdog(struct megasas_instance *instance); void megasas_set_dma_settings(struct megasas_instance *instance, struct megasas_dcmd_frame *dcmd, dma_addr_t dma_addr, u32 dma_len); +int megasas_adp_reset_wait_for_ready(struct megasas_instance *instance, + bool do_adp_reset, + int ocr_context); +int megasas_irqpoll(struct irq_poll *irqpoll, int budget); +void megasas_dump_fusion_io(struct scsi_cmnd *scmd); #endif /*LSI_MEGARAID_SAS_H */ diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 3dd1df472dc6..80ab9700f1de 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -36,12 +36,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include "megaraid_sas_fusion.h" #include "megaraid_sas.h" @@ -50,47 +52,59 @@ * Will be set in megasas_init_mfi if user does not provide */ static unsigned int max_sectors; -module_param_named(max_sectors, max_sectors, int, 0); +module_param_named(max_sectors, max_sectors, int, 0444); MODULE_PARM_DESC(max_sectors, "Maximum number of sectors per IO command"); static int msix_disable; -module_param(msix_disable, int, S_IRUGO); +module_param(msix_disable, int, 0444); MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0"); static unsigned int msix_vectors; -module_param(msix_vectors, int, S_IRUGO); +module_param(msix_vectors, int, 0444); MODULE_PARM_DESC(msix_vectors, "MSI-X max vector count. Default: Set by FW"); static int allow_vf_ioctls; -module_param(allow_vf_ioctls, int, S_IRUGO); +module_param(allow_vf_ioctls, int, 0444); MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0"); static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH; -module_param(throttlequeuedepth, int, S_IRUGO); +module_param(throttlequeuedepth, int, 0444); MODULE_PARM_DESC(throttlequeuedepth, "Adapter queue depth when throttled due to I/O timeout. Default: 16"); unsigned int resetwaittime = MEGASAS_RESET_WAIT_TIME; -module_param(resetwaittime, int, S_IRUGO); +module_param(resetwaittime, int, 0444); MODULE_PARM_DESC(resetwaittime, "Wait time in (1-180s) after I/O timeout before resetting adapter. Default: 180s"); int smp_affinity_enable = 1; -module_param(smp_affinity_enable, int, S_IRUGO); +module_param(smp_affinity_enable, int, 0444); MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)"); int rdpq_enable = 1; -module_param(rdpq_enable, int, S_IRUGO); +module_param(rdpq_enable, int, 0444); MODULE_PARM_DESC(rdpq_enable, "Allocate reply queue in chunks for large queue depth enable/disable Default: enable(1)"); unsigned int dual_qdepth_disable; -module_param(dual_qdepth_disable, int, S_IRUGO); +module_param(dual_qdepth_disable, int, 0444); MODULE_PARM_DESC(dual_qdepth_disable, "Disable dual queue depth feature. Default: 0"); unsigned int scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT; -module_param(scmd_timeout, int, S_IRUGO); +module_param(scmd_timeout, int, 0444); MODULE_PARM_DESC(scmd_timeout, "scsi command timeout (10-90s), default 90s. See megasas_reset_timer."); +int perf_mode = -1; +module_param(perf_mode, int, 0444); +MODULE_PARM_DESC(perf_mode, "Performance mode (only for Aero adapters), options:\n\t\t" + "0 - balanced: High iops and low latency queues are allocated &\n\t\t" + "interrupt coalescing is enabled only on high iops queues\n\t\t" + "1 - iops: High iops queues are not allocated &\n\t\t" + "interrupt coalescing is enabled on all queues\n\t\t" + "2 - latency: High iops queues are not allocated &\n\t\t" + "interrupt coalescing is disabled on all queues\n\t\t" + "default mode is 'balanced'" + ); + MODULE_LICENSE("GPL"); MODULE_VERSION(MEGASAS_VERSION); MODULE_AUTHOR("megaraidlinux.pdl@broadcom.com"); @@ -154,6 +168,10 @@ static struct pci_device_id megasas_pci_table[] = { {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E2)}, {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E5)}, {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E6)}, + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E0)}, + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E3)}, + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E4)}, + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_AERO_10E7)}, {} }; @@ -170,10 +188,17 @@ static u32 support_poll_for_event; u32 megasas_dbg_lvl; static u32 support_device_change; static bool support_nvme_encapsulation; +static bool support_pci_lane_margining; /* define lock for aen poll */ spinlock_t poll_aen_lock; +extern struct dentry *megasas_debugfs_root; +extern void megasas_init_debugfs(void); +extern void megasas_exit_debugfs(void); +extern void megasas_setup_debugfs(struct megasas_instance *instance); +extern void megasas_destroy_debugfs(struct megasas_instance *instance); + void megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, u8 alt_status); @@ -1098,8 +1123,9 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance, ret = wait_event_timeout(instance->int_cmd_wait_q, cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ); if (!ret) { - dev_err(&instance->pdev->dev, "Failed from %s %d DCMD Timed out\n", - __func__, __LINE__); + dev_err(&instance->pdev->dev, + "DCMD(opcode: 0x%x) is timed out, func:%s\n", + cmd->frame->dcmd.opcode, __func__); return DCMD_TIMEOUT; } } else @@ -1128,6 +1154,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd; struct megasas_abort_frame *abort_fr; int ret = 0; + u32 opcode; cmd = megasas_get_cmd(instance); @@ -1163,8 +1190,10 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance, ret = wait_event_timeout(instance->abort_cmd_wait_q, cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ); if (!ret) { - dev_err(&instance->pdev->dev, "Failed from %s %d Abort Timed out\n", - __func__, __LINE__); + opcode = cmd_to_abort->frame->dcmd.opcode; + dev_err(&instance->pdev->dev, + "Abort(to be aborted DCMD opcode: 0x%x) is timed out func:%s\n", + opcode, __func__); return DCMD_TIMEOUT; } } else @@ -1918,7 +1947,6 @@ megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size) static void megasas_set_static_target_properties(struct scsi_device *sdev, bool is_target_prop) { - u16 target_index = 0; u8 interface_type; u32 device_qd = MEGASAS_DEFAULT_CMD_PER_LUN; u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB; @@ -1935,8 +1963,6 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev, */ blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ); - target_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id; - switch (interface_type) { case SAS_PD: device_qd = MEGASAS_SAS_QD; @@ -2822,21 +2848,108 @@ blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) } /** - * megasas_dump_frame - This function will dump MPT/MFI frame + * megasas_dump - This function will print hexdump of provided buffer. + * @buf: Buffer to be dumped + * @sz: Size in bytes + * @format: Different formats of dumping e.g. format=n will + * cause only 'n' 32 bit words to be dumped in a single + * line. */ -static inline void -megasas_dump_frame(void *mpi_request, int sz) +inline void +megasas_dump(void *buf, int sz, int format) { int i; - __le32 *mfp = (__le32 *)mpi_request; + __le32 *buf_loc = (__le32 *)buf; - printk(KERN_INFO "IO request frame:\n\t"); - for (i = 0; i < sz / sizeof(__le32); i++) { - if (i && ((i % 8) == 0)) - printk("\n\t"); - printk("%08x ", le32_to_cpu(mfp[i])); + for (i = 0; i < (sz / sizeof(__le32)); i++) { + if ((i % format) == 0) { + if (i != 0) + printk(KERN_CONT "\n"); + printk(KERN_CONT "%08x: ", (i * 4)); + } + printk(KERN_CONT "%08x ", le32_to_cpu(buf_loc[i])); } - printk("\n"); + printk(KERN_CONT "\n"); +} + +/** + * megasas_dump_reg_set - This function will print hexdump of register set + * @buf: Buffer to be dumped + * @sz: Size in bytes + * @format: Different formats of dumping e.g. format=n will + * cause only 'n' 32 bit words to be dumped in a + * single line. + */ +inline void +megasas_dump_reg_set(void __iomem *reg_set) +{ + unsigned int i, sz = 256; + u32 __iomem *reg = (u32 __iomem *)reg_set; + + for (i = 0; i < (sz / sizeof(u32)); i++) + printk("%08x: %08x\n", (i * 4), readl(®[i])); +} + +/** + * megasas_dump_fusion_io - This function will print key details + * of SCSI IO + * @scmd: SCSI command pointer of SCSI IO + */ +void +megasas_dump_fusion_io(struct scsi_cmnd *scmd) +{ + struct megasas_cmd_fusion *cmd; + union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc; + struct megasas_instance *instance; + + cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr; + instance = (struct megasas_instance *)scmd->device->host->hostdata; + + scmd_printk(KERN_INFO, scmd, + "scmd: (0x%p) retries: 0x%x allowed: 0x%x\n", + scmd, scmd->retries, scmd->allowed); + scsi_print_command(scmd); + + if (cmd) { + req_desc = (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)cmd->request_desc; + scmd_printk(KERN_INFO, scmd, "Request descriptor details:\n"); + scmd_printk(KERN_INFO, scmd, + "RequestFlags:0x%x MSIxIndex:0x%x SMID:0x%x LMID:0x%x DevHandle:0x%x\n", + req_desc->SCSIIO.RequestFlags, + req_desc->SCSIIO.MSIxIndex, req_desc->SCSIIO.SMID, + req_desc->SCSIIO.LMID, req_desc->SCSIIO.DevHandle); + + printk(KERN_INFO "IO request frame:\n"); + megasas_dump(cmd->io_request, + MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE, 8); + printk(KERN_INFO "Chain frame:\n"); + megasas_dump(cmd->sg_frame, + instance->max_chain_frame_sz, 8); + } + +} + +/* + * megasas_dump_sys_regs - This function will dump system registers through + * sysfs. + * @reg_set: Pointer to System register set. + * @buf: Buffer to which output is to be written. + * @return: Number of bytes written to buffer. + */ +static inline ssize_t +megasas_dump_sys_regs(void __iomem *reg_set, char *buf) +{ + unsigned int i, sz = 256; + int bytes_wrote = 0; + char *loc = (char *)buf; + u32 __iomem *reg = (u32 __iomem *)reg_set; + + for (i = 0; i < sz / sizeof(u32); i++) { + bytes_wrote += snprintf(loc + bytes_wrote, PAGE_SIZE, + "%08x: %08x\n", (i * 4), + readl(®[i])); + } + return bytes_wrote; } /** @@ -2850,24 +2963,20 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd) instance = (struct megasas_instance *)scmd->device->host->hostdata; scmd_printk(KERN_INFO, scmd, - "Controller reset is requested due to IO timeout\n" - "SCSI command pointer: (%p)\t SCSI host state: %d\t" - " SCSI host busy: %d\t FW outstanding: %d\n", - scmd, scmd->device->host->shost_state, + "OCR is requested due to IO timeout!!\n"); + + scmd_printk(KERN_INFO, scmd, + "SCSI host state: %d SCSI host busy: %d FW outstanding: %d\n", + scmd->device->host->shost_state, scsi_host_busy(scmd->device->host), atomic_read(&instance->fw_outstanding)); - /* * First wait for all commands to complete */ if (instance->adapter_type == MFI_SERIES) { ret = megasas_generic_reset(scmd); } else { - struct megasas_cmd_fusion *cmd; - cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr; - if (cmd) - megasas_dump_frame(cmd->io_request, - MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE); + megasas_dump_fusion_io(scmd); ret = megasas_reset_fusion(scmd->device->host, SCSIIO_TIMEOUT_OCR); } @@ -3017,7 +3126,7 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) } static ssize_t -megasas_fw_crash_buffer_store(struct device *cdev, +fw_crash_buffer_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3036,14 +3145,13 @@ megasas_fw_crash_buffer_store(struct device *cdev, } static ssize_t -megasas_fw_crash_buffer_show(struct device *cdev, +fw_crash_buffer_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); struct megasas_instance *instance = (struct megasas_instance *) shost->hostdata; u32 size; - unsigned long buff_addr; unsigned long dmachunk = CRASH_DMA_BUF_SIZE; unsigned long src_addr; unsigned long flags; @@ -3060,8 +3168,6 @@ megasas_fw_crash_buffer_show(struct device *cdev, return -EINVAL; } - buff_addr = (unsigned long) buf; - if (buff_offset > (instance->fw_crash_buffer_size * dmachunk)) { dev_err(&instance->pdev->dev, "Firmware crash dump offset is out of range\n"); @@ -3081,7 +3187,7 @@ megasas_fw_crash_buffer_show(struct device *cdev, } static ssize_t -megasas_fw_crash_buffer_size_show(struct device *cdev, +fw_crash_buffer_size_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3093,7 +3199,7 @@ megasas_fw_crash_buffer_size_show(struct device *cdev, } static ssize_t -megasas_fw_crash_state_store(struct device *cdev, +fw_crash_state_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3128,7 +3234,7 @@ megasas_fw_crash_state_store(struct device *cdev, } static ssize_t -megasas_fw_crash_state_show(struct device *cdev, +fw_crash_state_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3139,14 +3245,14 @@ megasas_fw_crash_state_show(struct device *cdev, } static ssize_t -megasas_page_size_show(struct device *cdev, +page_size_show(struct device *cdev, struct device_attribute *attr, char *buf) { return snprintf(buf, PAGE_SIZE, "%ld\n", (unsigned long)PAGE_SIZE - 1); } static ssize_t -megasas_ldio_outstanding_show(struct device *cdev, struct device_attribute *attr, +ldio_outstanding_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3156,7 +3262,7 @@ megasas_ldio_outstanding_show(struct device *cdev, struct device_attribute *attr } static ssize_t -megasas_fw_cmds_outstanding_show(struct device *cdev, +fw_cmds_outstanding_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3165,18 +3271,37 @@ megasas_fw_cmds_outstanding_show(struct device *cdev, return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&instance->fw_outstanding)); } -static DEVICE_ATTR(fw_crash_buffer, S_IRUGO | S_IWUSR, - megasas_fw_crash_buffer_show, megasas_fw_crash_buffer_store); -static DEVICE_ATTR(fw_crash_buffer_size, S_IRUGO, - megasas_fw_crash_buffer_size_show, NULL); -static DEVICE_ATTR(fw_crash_state, S_IRUGO | S_IWUSR, - megasas_fw_crash_state_show, megasas_fw_crash_state_store); -static DEVICE_ATTR(page_size, S_IRUGO, - megasas_page_size_show, NULL); -static DEVICE_ATTR(ldio_outstanding, S_IRUGO, - megasas_ldio_outstanding_show, NULL); -static DEVICE_ATTR(fw_cmds_outstanding, S_IRUGO, - megasas_fw_cmds_outstanding_show, NULL); +static ssize_t +dump_system_regs_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct megasas_instance *instance = + (struct megasas_instance *)shost->hostdata; + + return megasas_dump_sys_regs(instance->reg_set, buf); +} + +static ssize_t +raid_map_id_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct megasas_instance *instance = + (struct megasas_instance *)shost->hostdata; + + return snprintf(buf, PAGE_SIZE, "%ld\n", + (unsigned long)instance->map_id); +} + +static DEVICE_ATTR_RW(fw_crash_buffer); +static DEVICE_ATTR_RO(fw_crash_buffer_size); +static DEVICE_ATTR_RW(fw_crash_state); +static DEVICE_ATTR_RO(page_size); +static DEVICE_ATTR_RO(ldio_outstanding); +static DEVICE_ATTR_RO(fw_cmds_outstanding); +static DEVICE_ATTR_RO(dump_system_regs); +static DEVICE_ATTR_RO(raid_map_id); struct device_attribute *megaraid_host_attrs[] = { &dev_attr_fw_crash_buffer_size, @@ -3185,6 +3310,8 @@ struct device_attribute *megaraid_host_attrs[] = { &dev_attr_page_size, &dev_attr_ldio_outstanding, &dev_attr_fw_cmds_outstanding, + &dev_attr_dump_system_regs, + &dev_attr_raid_map_id, NULL, }; @@ -3368,6 +3495,7 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, case MFI_CMD_SMP: case MFI_CMD_STP: case MFI_CMD_NVME: + case MFI_CMD_TOOLBOX: megasas_complete_int_cmd(instance, cmd); break; @@ -3776,7 +3904,6 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) int i; u8 max_wait; u32 fw_state; - u32 cur_state; u32 abs_state, curr_abs_state; abs_state = instance->instancet->read_fw_status_reg(instance); @@ -3791,13 +3918,18 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) switch (fw_state) { case MFI_STATE_FAULT: - dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW in FAULT state!!\n"); + dev_printk(KERN_ERR, &instance->pdev->dev, + "FW in FAULT state, Fault code:0x%x subcode:0x%x func:%s\n", + abs_state & MFI_STATE_FAULT_CODE, + abs_state & MFI_STATE_FAULT_SUBCODE, __func__); if (ocr) { max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_FAULT; break; - } else + } else { + dev_printk(KERN_DEBUG, &instance->pdev->dev, "System Register set:\n"); + megasas_dump_reg_set(instance->reg_set); return -ENODEV; + } case MFI_STATE_WAIT_HANDSHAKE: /* @@ -3817,7 +3949,6 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) &instance->reg_set->inbound_doorbell); max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_WAIT_HANDSHAKE; break; case MFI_STATE_BOOT_MESSAGE_PENDING: @@ -3833,7 +3964,6 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) &instance->reg_set->inbound_doorbell); max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_BOOT_MESSAGE_PENDING; break; case MFI_STATE_OPERATIONAL: @@ -3866,7 +3996,6 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) &instance->reg_set->inbound_doorbell); max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_OPERATIONAL; break; case MFI_STATE_UNDEFINED: @@ -3874,37 +4003,33 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) * This state should not last for more than 2 seconds */ max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_UNDEFINED; break; case MFI_STATE_BB_INIT: max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_BB_INIT; break; case MFI_STATE_FW_INIT: max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_FW_INIT; break; case MFI_STATE_FW_INIT_2: max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_FW_INIT_2; break; case MFI_STATE_DEVICE_SCAN: max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_DEVICE_SCAN; break; case MFI_STATE_FLUSH_CACHE: max_wait = MEGASAS_RESET_WAIT_TIME; - cur_state = MFI_STATE_FLUSH_CACHE; break; default: dev_printk(KERN_DEBUG, &instance->pdev->dev, "Unknown state 0x%x\n", fw_state); + dev_printk(KERN_DEBUG, &instance->pdev->dev, "System Register set:\n"); + megasas_dump_reg_set(instance->reg_set); return -ENODEV; } @@ -3927,6 +4052,8 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr) if (curr_abs_state == abs_state) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW state [%d] hasn't changed " "in %d secs\n", fw_state, max_wait); + dev_printk(KERN_DEBUG, &instance->pdev->dev, "System Register set:\n"); + megasas_dump_reg_set(instance->reg_set); return -ENODEV; } @@ -3990,22 +4117,11 @@ static int megasas_create_frame_pool(struct megasas_instance *instance) { int i; u16 max_cmd; - u32 sge_sz; u32 frame_count; struct megasas_cmd *cmd; max_cmd = instance->max_mfi_cmds; - /* - * Size of our frame is 64 bytes for MFI frame, followed by max SG - * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer - */ - sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : - sizeof(struct megasas_sge32); - - if (instance->flag_ieee) - sge_sz = sizeof(struct megasas_sge_skinny); - /* * For MFI controllers. * max_num_sge = 60 @@ -4255,8 +4371,10 @@ megasas_get_pd_info(struct megasas_instance *instance, struct scsi_device *sdev) switch (dcmd_timeout_ocr_possible(instance)) { case INITIATE_OCR: cmd->flags |= DRV_DCMD_SKIP_REFIRE; + mutex_unlock(&instance->reset_mutex); megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); + mutex_lock(&instance->reset_mutex); break; case KILL_ADAPTER: megaraid_sas_kill_hba(instance); @@ -4292,7 +4410,6 @@ megasas_get_pd_list(struct megasas_instance *instance) struct megasas_dcmd_frame *dcmd; struct MR_PD_LIST *ci; struct MR_PD_ADDRESS *pd_addr; - dma_addr_t ci_h = 0; if (instance->pd_list_not_supported) { dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY " @@ -4301,7 +4418,6 @@ megasas_get_pd_list(struct megasas_instance *instance) } ci = instance->pd_list_buf; - ci_h = instance->pd_list_buf_h; cmd = megasas_get_cmd(instance); @@ -4374,6 +4490,9 @@ megasas_get_pd_list(struct megasas_instance *instance) case DCMD_SUCCESS: pd_addr = ci->addr; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, "%s, sysPD count: 0x%x\n", + __func__, le32_to_cpu(ci->count)); if ((le32_to_cpu(ci->count) > (MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL))) @@ -4389,6 +4508,11 @@ megasas_get_pd_list(struct megasas_instance *instance) pd_addr->scsiDevType; instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].driveState = MR_PD_STATE_SYSTEM; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, + "PD%d: targetID: 0x%03x deviceType:0x%x\n", + pd_index, le16_to_cpu(pd_addr->deviceId), + pd_addr->scsiDevType); pd_addr++; } @@ -4492,6 +4616,10 @@ megasas_get_ld_list(struct megasas_instance *instance) break; case DCMD_SUCCESS: + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, "%s, LD count: 0x%x\n", + __func__, ld_count); + if (ld_count > instance->fw_supported_vd_count) break; @@ -4501,6 +4629,10 @@ megasas_get_ld_list(struct megasas_instance *instance) if (ci->ldList[ld_index].state != 0) { ids = ci->ldList[ld_index].ref.targetId; instance->ld_ids[ids] = ci->ldList[ld_index].ref.targetId; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, + "LD%d: targetID: 0x%03x\n", + ld_index, ids); } } @@ -4604,6 +4736,10 @@ megasas_ld_list_query(struct megasas_instance *instance, u8 query_type) case DCMD_SUCCESS: tgtid_count = le32_to_cpu(ci->count); + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, "%s, LD count: 0x%x\n", + __func__, tgtid_count); + if ((tgtid_count > (instance->fw_supported_vd_count))) break; @@ -4611,6 +4747,9 @@ megasas_ld_list_query(struct megasas_instance *instance, u8 query_type) for (ld_index = 0; ld_index < tgtid_count; ld_index++) { ids = ci->targetId[ld_index]; instance->ld_ids[ids] = ci->targetId[ld_index]; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, "LD%d: targetID: 0x%03x\n", + ld_index, ci->targetId[ld_index]); } break; @@ -4690,6 +4829,13 @@ megasas_host_device_list_query(struct megasas_instance *instance, */ count = le32_to_cpu(ci->count); + if (count > (MEGASAS_MAX_PD + MAX_LOGICAL_DRIVES_EXT)) + break; + + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, "%s, Device count: 0x%x\n", + __func__, count); + memset(instance->local_pd_list, 0, MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)); memset(instance->ld_ids, 0xff, MAX_LOGICAL_DRIVES_EXT); @@ -4701,8 +4847,16 @@ megasas_host_device_list_query(struct megasas_instance *instance, ci->host_device_list[i].scsi_type; instance->local_pd_list[target_id].driveState = MR_PD_STATE_SYSTEM; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, + "Device %d: PD targetID: 0x%03x deviceType:0x%x\n", + i, target_id, ci->host_device_list[i].scsi_type); } else { instance->ld_ids[target_id] = target_id; + if (megasas_dbg_lvl & LD_PD_DEBUG) + dev_info(&instance->pdev->dev, + "Device %d: LD targetID: 0x%03x\n", + i, target_id); } } @@ -4714,8 +4868,10 @@ megasas_host_device_list_query(struct megasas_instance *instance, switch (dcmd_timeout_ocr_possible(instance)) { case INITIATE_OCR: cmd->flags |= DRV_DCMD_SKIP_REFIRE; + mutex_unlock(&instance->reset_mutex); megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); + mutex_lock(&instance->reset_mutex); break; case KILL_ADAPTER: megaraid_sas_kill_hba(instance); @@ -4863,8 +5019,10 @@ void megasas_get_snapdump_properties(struct megasas_instance *instance) switch (dcmd_timeout_ocr_possible(instance)) { case INITIATE_OCR: cmd->flags |= DRV_DCMD_SKIP_REFIRE; + mutex_unlock(&instance->reset_mutex); megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); + mutex_lock(&instance->reset_mutex); break; case KILL_ADAPTER: megaraid_sas_kill_hba(instance); @@ -4943,6 +5101,7 @@ megasas_get_ctrl_info(struct megasas_instance *instance) le32_to_cpus((u32 *)&ci->adapterOperations2); le32_to_cpus((u32 *)&ci->adapterOperations3); le16_to_cpus((u16 *)&ci->adapter_operations4); + le32_to_cpus((u32 *)&ci->adapter_operations5); /* Update the latest Ext VD info. * From Init path, store current firmware details. @@ -4950,12 +5109,14 @@ megasas_get_ctrl_info(struct megasas_instance *instance) * in case of Firmware upgrade without system reboot. */ megasas_update_ext_vd_details(instance); - instance->use_seqnum_jbod_fp = + instance->support_seqnum_jbod_fp = ci->adapterOperations3.useSeqNumJbodFP; instance->support_morethan256jbod = ci->adapter_operations4.support_pd_map_target_id; instance->support_nvme_passthru = ci->adapter_operations4.support_nvme_passthru; + instance->support_pci_lane_margining = + ci->adapter_operations5.support_pci_lane_margining; instance->task_abort_tmo = ci->TaskAbortTO; instance->max_reset_tmo = ci->MaxResetTO; @@ -4987,6 +5148,10 @@ megasas_get_ctrl_info(struct megasas_instance *instance) dev_info(&instance->pdev->dev, "FW provided TM TaskAbort/Reset timeout\t: %d secs/%d secs\n", instance->task_abort_tmo, instance->max_reset_tmo); + dev_info(&instance->pdev->dev, "JBOD sequence map support\t: %s\n", + instance->support_seqnum_jbod_fp ? "Yes" : "No"); + dev_info(&instance->pdev->dev, "PCI Lane Margining support\t: %s\n", + instance->support_pci_lane_margining ? "Yes" : "No"); break; @@ -4994,8 +5159,10 @@ megasas_get_ctrl_info(struct megasas_instance *instance) switch (dcmd_timeout_ocr_possible(instance)) { case INITIATE_OCR: cmd->flags |= DRV_DCMD_SKIP_REFIRE; + mutex_unlock(&instance->reset_mutex); megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); + mutex_lock(&instance->reset_mutex); break; case KILL_ADAPTER: megaraid_sas_kill_hba(instance); @@ -5262,6 +5429,25 @@ megasas_init_adapter_mfi(struct megasas_instance *instance) return 1; } +static +void megasas_setup_irq_poll(struct megasas_instance *instance) +{ + struct megasas_irq_context *irq_ctx; + u32 count, i; + + count = instance->msix_vectors > 0 ? instance->msix_vectors : 1; + + /* Initialize IRQ poll */ + for (i = 0; i < count; i++) { + irq_ctx = &instance->irq_context[i]; + irq_ctx->os_irq = pci_irq_vector(instance->pdev, i); + irq_ctx->irq_poll_scheduled = false; + irq_poll_init(&irq_ctx->irqpoll, + instance->threshold_reply_count, + megasas_irqpoll); + } +} + /* * megasas_setup_irqs_ioapic - register legacy interrupts. * @instance: Adapter soft state @@ -5286,6 +5472,8 @@ megasas_setup_irqs_ioapic(struct megasas_instance *instance) __func__, __LINE__); return -1; } + instance->perf_mode = MR_LATENCY_PERF_MODE; + instance->low_latency_index_start = 0; return 0; } @@ -5320,6 +5508,7 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe) &instance->irq_context[j]); /* Retry irq register for IO_APIC*/ instance->msix_vectors = 0; + instance->msix_load_balance = false; if (is_probe) { pci_free_irq_vectors(instance->pdev); return megasas_setup_irqs_ioapic(instance); @@ -5328,6 +5517,7 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe) } } } + return 0; } @@ -5340,6 +5530,16 @@ static void megasas_destroy_irqs(struct megasas_instance *instance) { int i; + int count; + struct megasas_irq_context *irq_ctx; + + count = instance->msix_vectors > 0 ? instance->msix_vectors : 1; + if (instance->adapter_type != MFI_SERIES) { + for (i = 0; i < count; i++) { + irq_ctx = &instance->irq_context[i]; + irq_poll_disable(&irq_ctx->irqpoll); + } + } if (instance->msix_vectors) for (i = 0; i < instance->msix_vectors; i++) { @@ -5368,10 +5568,12 @@ megasas_setup_jbod_map(struct megasas_instance *instance) pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)); + instance->use_seqnum_jbod_fp = + instance->support_seqnum_jbod_fp; if (reset_devices || !fusion || - !instance->ctrl_info_buf->adapterOperations3.useSeqNumJbodFP) { + !instance->support_seqnum_jbod_fp) { dev_info(&instance->pdev->dev, - "Jbod map is not supported %s %d\n", + "JBOD sequence map is disabled %s %d\n", __func__, __LINE__); instance->use_seqnum_jbod_fp = false; return; @@ -5410,9 +5612,11 @@ megasas_setup_jbod_map(struct megasas_instance *instance) static void megasas_setup_reply_map(struct megasas_instance *instance) { const struct cpumask *mask; - unsigned int queue, cpu; + unsigned int queue, cpu, low_latency_index_start; - for (queue = 0; queue < instance->msix_vectors; queue++) { + low_latency_index_start = instance->low_latency_index_start; + + for (queue = low_latency_index_start; queue < instance->msix_vectors; queue++) { mask = pci_irq_get_affinity(instance->pdev, queue); if (!mask) goto fallback; @@ -5423,8 +5627,14 @@ static void megasas_setup_reply_map(struct megasas_instance *instance) return; fallback: - for_each_possible_cpu(cpu) - instance->reply_map[cpu] = cpu % instance->msix_vectors; + queue = low_latency_index_start; + for_each_possible_cpu(cpu) { + instance->reply_map[cpu] = queue; + if (queue == (instance->msix_vectors - 1)) + queue = low_latency_index_start; + else + queue++; + } } /** @@ -5461,6 +5671,89 @@ int megasas_get_device_list(struct megasas_instance *instance) return SUCCESS; } + +/** + * megasas_set_high_iops_queue_affinity_hint - Set affinity hint for high IOPS queues + * @instance: Adapter soft state + * return: void + */ +static inline void +megasas_set_high_iops_queue_affinity_hint(struct megasas_instance *instance) +{ + int i; + int local_numa_node; + + if (instance->perf_mode == MR_BALANCED_PERF_MODE) { + local_numa_node = dev_to_node(&instance->pdev->dev); + + for (i = 0; i < instance->low_latency_index_start; i++) + irq_set_affinity_hint(pci_irq_vector(instance->pdev, i), + cpumask_of_node(local_numa_node)); + } +} + +static int +__megasas_alloc_irq_vectors(struct megasas_instance *instance) +{ + int i, irq_flags; + struct irq_affinity desc = { .pre_vectors = instance->low_latency_index_start }; + struct irq_affinity *descp = &desc; + + irq_flags = PCI_IRQ_MSIX; + + if (instance->smp_affinity_enable) + irq_flags |= PCI_IRQ_AFFINITY; + else + descp = NULL; + + i = pci_alloc_irq_vectors_affinity(instance->pdev, + instance->low_latency_index_start, + instance->msix_vectors, irq_flags, descp); + + return i; +} + +/** + * megasas_alloc_irq_vectors - Allocate IRQ vectors/enable MSI-x vectors + * @instance: Adapter soft state + * return: void + */ +static void +megasas_alloc_irq_vectors(struct megasas_instance *instance) +{ + int i; + unsigned int num_msix_req; + + i = __megasas_alloc_irq_vectors(instance); + + if ((instance->perf_mode == MR_BALANCED_PERF_MODE) && + (i != instance->msix_vectors)) { + if (instance->msix_vectors) + pci_free_irq_vectors(instance->pdev); + /* Disable Balanced IOPS mode and try realloc vectors */ + instance->perf_mode = MR_LATENCY_PERF_MODE; + instance->low_latency_index_start = 1; + num_msix_req = num_online_cpus() + instance->low_latency_index_start; + + instance->msix_vectors = min(num_msix_req, + instance->msix_vectors); + + i = __megasas_alloc_irq_vectors(instance); + + } + + dev_info(&instance->pdev->dev, + "requested/available msix %d/%d\n", instance->msix_vectors, i); + + if (i > 0) + instance->msix_vectors = i; + else + instance->msix_vectors = 0; + + if (instance->smp_affinity_enable) + megasas_set_high_iops_queue_affinity_hint(instance); +} + /** * megasas_init_fw - Initializes the FW * @instance: Adapter soft state @@ -5474,12 +5767,15 @@ static int megasas_init_fw(struct megasas_instance *instance) u32 max_sectors_2, tmp_sectors, msix_enable; u32 scratch_pad_1, scratch_pad_2, scratch_pad_3, status_reg; resource_size_t base_addr; + void *base_addr_phys; struct megasas_ctrl_info *ctrl_info = NULL; unsigned long bar_list; - int i, j, loop, fw_msix_count = 0; + int i, j, loop; struct IOV_111 *iovPtr; struct fusion_context *fusion; - bool do_adp_reset = true; + bool intr_coalescing; + unsigned int num_msix_req; + u16 lnksta, speed; fusion = instance->ctrl_context; @@ -5500,6 +5796,11 @@ static int megasas_init_fw(struct megasas_instance *instance) goto fail_ioremap; } + base_addr_phys = &base_addr; + dev_printk(KERN_DEBUG, &instance->pdev->dev, + "BAR:0x%lx BAR's base_addr(phys):%pa mapped virt_addr:0x%p\n", + instance->bar, base_addr_phys, instance->reg_set); + if (instance->adapter_type != MFI_SERIES) instance->instancet = &megasas_instance_template_fusion; else { @@ -5526,29 +5827,35 @@ static int megasas_init_fw(struct megasas_instance *instance) } if (megasas_transition_to_ready(instance, 0)) { - if (instance->adapter_type >= INVADER_SERIES) { + dev_info(&instance->pdev->dev, + "Failed to transition controller to ready from %s!\n", + __func__); + if (instance->adapter_type != MFI_SERIES) { status_reg = instance->instancet->read_fw_status_reg( instance); - do_adp_reset = status_reg & MFI_RESET_ADAPTER; - } - - if (do_adp_reset) { + if (status_reg & MFI_RESET_ADAPTER) { + if (megasas_adp_reset_wait_for_ready + (instance, true, 0) == FAILED) + goto fail_ready_state; + } else { + goto fail_ready_state; + } + } else { atomic_set(&instance->fw_reset_no_pci_access, 1); instance->instancet->adp_reset (instance, instance->reg_set); atomic_set(&instance->fw_reset_no_pci_access, 0); - dev_info(&instance->pdev->dev, - "FW restarted successfully from %s!\n", - __func__); /*waiting for about 30 second before retry*/ ssleep(30); if (megasas_transition_to_ready(instance, 0)) goto fail_ready_state; - } else { - goto fail_ready_state; } + + dev_info(&instance->pdev->dev, + "FW restarted successfully from %s!\n", + __func__); } megasas_init_ctrl_params(instance); @@ -5573,11 +5880,21 @@ static int megasas_init_fw(struct megasas_instance *instance) MR_MAX_RAID_MAP_SIZE_MASK); } + switch (instance->adapter_type) { + case VENTURA_SERIES: + fusion->pcie_bw_limitation = true; + break; + case AERO_SERIES: + fusion->r56_div_offload = true; + break; + default: + break; + } + /* Check if MSI-X is supported while in ready state */ msix_enable = (instance->instancet->read_fw_status_reg(instance) & 0x4000000) >> 0x1a; if (msix_enable && !msix_disable) { - int irq_flags = PCI_IRQ_MSIX; scratch_pad_1 = megasas_readl (instance, &instance->reg_set->outbound_scratch_pad_1); @@ -5587,7 +5904,6 @@ static int megasas_init_fw(struct megasas_instance *instance) /* Thunderbolt Series*/ instance->msix_vectors = (scratch_pad_1 & MR_MAX_REPLY_QUEUES_OFFSET) + 1; - fw_msix_count = instance->msix_vectors; } else { instance->msix_vectors = ((scratch_pad_1 & MR_MAX_REPLY_QUEUES_EXT_OFFSET) @@ -5616,7 +5932,12 @@ static int megasas_init_fw(struct megasas_instance *instance) if (rdpq_enable) instance->is_rdpq = (scratch_pad_1 & MR_RDPQ_MODE_OFFSET) ? 1 : 0; - fw_msix_count = instance->msix_vectors; + + if (!instance->msix_combined) { + instance->msix_load_balance = true; + instance->smp_affinity_enable = false; + } + /* Save 1-15 reply post index address to local memory * Index 0 is already saved from reg offset * MPI2_REPLY_POST_HOST_INDEX_OFFSET @@ -5629,22 +5950,91 @@ static int megasas_init_fw(struct megasas_instance *instance) + (loop * 0x10)); } } + + dev_info(&instance->pdev->dev, + "firmware supports msix\t: (%d)", + instance->msix_vectors); if (msix_vectors) instance->msix_vectors = min(msix_vectors, instance->msix_vectors); } else /* MFI adapters */ instance->msix_vectors = 1; - /* Don't bother allocating more MSI-X vectors than cpus */ - instance->msix_vectors = min(instance->msix_vectors, - (unsigned int)num_online_cpus()); - if (smp_affinity_enable) - irq_flags |= PCI_IRQ_AFFINITY; - i = pci_alloc_irq_vectors(instance->pdev, 1, - instance->msix_vectors, irq_flags); - if (i > 0) - instance->msix_vectors = i; + + + /* + * For Aero (if some conditions are met), driver will configure a + * few additional reply queues with interrupt coalescing enabled. + * These queues with interrupt coalescing enabled are called + * High IOPS queues and rest of reply queues (based on number of + * logical CPUs) are termed as Low latency queues. + * + * Total Number of reply queues = High IOPS queues + low latency queues + * + * For rest of fusion adapters, 1 additional reply queue will be + * reserved for management commands, rest of reply queues + * (based on number of logical CPUs) will be used for IOs and + * referenced as IO queues. + * Total Number of reply queues = 1 + IO queues + * + * MFI adapters supports single MSI-x so single reply queue + * will be used for IO and management commands. + */ + + intr_coalescing = (scratch_pad_1 & MR_INTR_COALESCING_SUPPORT_OFFSET) ? + true : false; + if (intr_coalescing && + (num_online_cpus() >= MR_HIGH_IOPS_QUEUE_COUNT) && + (instance->msix_vectors == MEGASAS_MAX_MSIX_QUEUES)) + instance->perf_mode = MR_BALANCED_PERF_MODE; else - instance->msix_vectors = 0; + instance->perf_mode = MR_LATENCY_PERF_MODE; + + + if (instance->adapter_type == AERO_SERIES) { + pcie_capability_read_word(instance->pdev, PCI_EXP_LNKSTA, &lnksta); + speed = lnksta & PCI_EXP_LNKSTA_CLS; + + /* + * For Aero, if PCIe link speed is <16 GT/s, then driver should operate + * in latency perf mode and enable R1 PCI bandwidth algorithm + */ + if (speed < 0x4) { + instance->perf_mode = MR_LATENCY_PERF_MODE; + fusion->pcie_bw_limitation = true; + } + + /* + * Performance mode settings provided through module parameter-perf_mode will + * take affect only for: + * 1. Aero family of adapters. + * 2. When user sets module parameter- perf_mode in range of 0-2. + */ + if ((perf_mode >= MR_BALANCED_PERF_MODE) && + (perf_mode <= MR_LATENCY_PERF_MODE)) + instance->perf_mode = perf_mode; + /* + * If intr coalescing is not supported by controller FW, then IOPS + * and Balanced modes are not feasible. + */ + if (!intr_coalescing) + instance->perf_mode = MR_LATENCY_PERF_MODE; + + } + + if (instance->perf_mode == MR_BALANCED_PERF_MODE) + instance->low_latency_index_start = + MR_HIGH_IOPS_QUEUE_COUNT; + else + instance->low_latency_index_start = 1; + + num_msix_req = num_online_cpus() + instance->low_latency_index_start; + + instance->msix_vectors = min(num_msix_req, + instance->msix_vectors); + + megasas_alloc_irq_vectors(instance); + if (!instance->msix_vectors) + instance->msix_load_balance = false; } /* * MSI-X host index 0 is common for all adapter. @@ -5668,8 +6058,6 @@ static int megasas_init_fw(struct megasas_instance *instance) megasas_setup_reply_map(instance); - dev_info(&instance->pdev->dev, - "firmware supports msix\t: (%d)", fw_msix_count); dev_info(&instance->pdev->dev, "current msix/online cpus\t: (%d/%d)\n", instance->msix_vectors, (unsigned int)num_online_cpus()); @@ -5707,6 +6095,9 @@ static int megasas_init_fw(struct megasas_instance *instance) megasas_setup_irqs_ioapic(instance)) goto fail_init_adapter; + if (instance->adapter_type != MFI_SERIES) + megasas_setup_irq_poll(instance); + instance->instancet->enable_intr(instance); dev_info(&instance->pdev->dev, "INIT adapter done\n"); @@ -5833,8 +6224,8 @@ static int megasas_init_fw(struct megasas_instance *instance) instance->UnevenSpanSupport ? "yes" : "no"); dev_info(&instance->pdev->dev, "firmware crash dump : %s\n", instance->crash_dump_drv_support ? "yes" : "no"); - dev_info(&instance->pdev->dev, "jbod sync map : %s\n", - instance->use_seqnum_jbod_fp ? "yes" : "no"); + dev_info(&instance->pdev->dev, "JBOD sequence map : %s\n", + instance->use_seqnum_jbod_fp ? "enabled" : "disabled"); instance->max_sectors_per_req = instance->max_num_sge * SGE_BUFFER_SIZE / 512; @@ -6197,8 +6588,10 @@ megasas_get_target_prop(struct megasas_instance *instance, switch (dcmd_timeout_ocr_possible(instance)) { case INITIATE_OCR: cmd->flags |= DRV_DCMD_SKIP_REFIRE; + mutex_unlock(&instance->reset_mutex); megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR); + mutex_lock(&instance->reset_mutex); break; case KILL_ADAPTER: megaraid_sas_kill_hba(instance); @@ -6748,6 +7141,7 @@ static inline void megasas_init_ctrl_params(struct megasas_instance *instance) INIT_LIST_HEAD(&instance->internal_reset_pending_q); atomic_set(&instance->fw_outstanding, 0); + atomic64_set(&instance->total_io_count, 0); init_waitqueue_head(&instance->int_cmd_wait_q); init_waitqueue_head(&instance->abort_cmd_wait_q); @@ -6770,6 +7164,8 @@ static inline void megasas_init_ctrl_params(struct megasas_instance *instance) instance->last_time = 0; instance->disableOnlineCtrlReset = 1; instance->UnevenSpanSupport = 0; + instance->smp_affinity_enable = smp_affinity_enable ? true : false; + instance->msix_load_balance = false; if (instance->adapter_type != MFI_SERIES) INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq); @@ -6791,6 +7187,12 @@ static int megasas_probe_one(struct pci_dev *pdev, u16 control = 0; switch (pdev->device) { + case PCI_DEVICE_ID_LSI_AERO_10E0: + case PCI_DEVICE_ID_LSI_AERO_10E3: + case PCI_DEVICE_ID_LSI_AERO_10E4: + case PCI_DEVICE_ID_LSI_AERO_10E7: + dev_err(&pdev->dev, "Adapter is in non secure mode\n"); + return 1; case PCI_DEVICE_ID_LSI_AERO_10E1: case PCI_DEVICE_ID_LSI_AERO_10E5: dev_info(&pdev->dev, "Adapter is in configurable secure mode\n"); @@ -6910,6 +7312,8 @@ static int megasas_probe_one(struct pci_dev *pdev, goto fail_start_aen; } + megasas_setup_debugfs(instance); + /* Get current SR-IOV LD/VF affiliation */ if (instance->requestorId) megasas_get_ld_vf_affiliation(instance, 1); @@ -7041,13 +7445,17 @@ static void megasas_shutdown_controller(struct megasas_instance *instance, static int megasas_suspend(struct pci_dev *pdev, pm_message_t state) { - struct Scsi_Host *host; struct megasas_instance *instance; instance = pci_get_drvdata(pdev); - host = instance->host; + + if (!instance) + return 0; + instance->unload = 1; + dev_info(&pdev->dev, "%s is called\n", __func__); + /* Shutdown SR-IOV heartbeat timer */ if (instance->requestorId && !instance->skip_heartbeat_timer_del) del_timer_sync(&instance->sriov_heartbeat_timer); @@ -7097,11 +7505,16 @@ megasas_resume(struct pci_dev *pdev) int irq_flags = PCI_IRQ_LEGACY; instance = pci_get_drvdata(pdev); + + if (!instance) + return 0; + host = instance->host; pci_set_power_state(pdev, PCI_D0); pci_enable_wake(pdev, PCI_D0, 0); pci_restore_state(pdev); + dev_info(&pdev->dev, "%s is called\n", __func__); /* * PCI prepping: enable device set bus mastering and dma mask */ @@ -7133,7 +7546,7 @@ megasas_resume(struct pci_dev *pdev) /* Now re-enable MSI-X */ if (instance->msix_vectors) { irq_flags = PCI_IRQ_MSIX; - if (smp_affinity_enable) + if (instance->smp_affinity_enable) irq_flags |= PCI_IRQ_AFFINITY; } rval = pci_alloc_irq_vectors(instance->pdev, 1, @@ -7171,6 +7584,9 @@ megasas_resume(struct pci_dev *pdev) megasas_setup_irqs_ioapic(instance)) goto fail_init_mfi; + if (instance->adapter_type != MFI_SERIES) + megasas_setup_irq_poll(instance); + /* Re-launch SR-IOV heartbeat timer */ if (instance->requestorId) { if (!megasas_sriov_start_heartbeat(instance, 0)) @@ -7261,6 +7677,10 @@ static void megasas_detach_one(struct pci_dev *pdev) u32 pd_seq_map_sz; instance = pci_get_drvdata(pdev); + + if (!instance) + return; + host = instance->host; fusion = instance->ctrl_context; @@ -7374,6 +7794,8 @@ static void megasas_detach_one(struct pci_dev *pdev) megasas_free_ctrl_mem(instance); + megasas_destroy_debugfs(instance); + scsi_host_put(host); pci_disable_device(pdev); @@ -7387,6 +7809,9 @@ static void megasas_shutdown(struct pci_dev *pdev) { struct megasas_instance *instance = pci_get_drvdata(pdev); + if (!instance) + return; + instance->unload = 1; if (megasas_wait_for_adapter_operational(instance)) @@ -7532,7 +7957,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, if ((ioc->frame.hdr.cmd >= MFI_CMD_OP_COUNT) || ((ioc->frame.hdr.cmd == MFI_CMD_NVME) && - !instance->support_nvme_passthru)) { + !instance->support_nvme_passthru) || + ((ioc->frame.hdr.cmd == MFI_CMD_TOOLBOX) && + !instance->support_pci_lane_margining)) { dev_err(&instance->pdev->dev, "Received invalid ioctl command 0x%x\n", ioc->frame.hdr.cmd); @@ -7568,10 +7995,13 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, opcode = le32_to_cpu(cmd->frame->dcmd.opcode); if (opcode == MR_DCMD_CTRL_SHUTDOWN) { + mutex_lock(&instance->reset_mutex); if (megasas_get_ctrl_info(instance) != DCMD_SUCCESS) { megasas_return_cmd(instance, cmd); + mutex_unlock(&instance->reset_mutex); return -1; } + mutex_unlock(&instance->reset_mutex); } if (opcode == MR_DRIVER_SET_APP_CRASHDUMP_MODE) { @@ -8013,6 +8443,14 @@ support_nvme_encapsulation_show(struct device_driver *dd, char *buf) static DRIVER_ATTR_RO(support_nvme_encapsulation); +static ssize_t +support_pci_lane_margining_show(struct device_driver *dd, char *buf) +{ + return sprintf(buf, "%u\n", support_pci_lane_margining); +} + +static DRIVER_ATTR_RO(support_pci_lane_margining); + static inline void megasas_remove_scsi_device(struct scsi_device *sdev) { sdev_printk(KERN_INFO, sdev, "SCSI device is removed\n"); @@ -8161,7 +8599,7 @@ megasas_aen_polling(struct work_struct *work) struct megasas_instance *instance = ev->instance; union megasas_evt_class_locale class_locale; int event_type = 0; - u32 seq_num, wait_time = MEGASAS_RESET_WAIT_TIME; + u32 seq_num; int error; u8 dcmd_ret = DCMD_SUCCESS; @@ -8171,10 +8609,6 @@ megasas_aen_polling(struct work_struct *work) return; } - /* Adjust event workqueue thread wait time for VF mode */ - if (instance->requestorId) - wait_time = MEGASAS_ROUTINE_WAIT_TIME_VF; - /* Don't run the event workqueue thread if OCR is running */ mutex_lock(&instance->reset_mutex); @@ -8286,6 +8720,7 @@ static int __init megasas_init(void) support_poll_for_event = 2; support_device_change = 1; support_nvme_encapsulation = true; + support_pci_lane_margining = true; memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info)); @@ -8301,6 +8736,8 @@ static int __init megasas_init(void) megasas_mgmt_majorno = rval; + megasas_init_debugfs(); + /* * Register ourselves as PCI hotplug module */ @@ -8340,8 +8777,17 @@ static int __init megasas_init(void) if (rval) goto err_dcf_support_nvme_encapsulation; + rval = driver_create_file(&megasas_pci_driver.driver, + &driver_attr_support_pci_lane_margining); + if (rval) + goto err_dcf_support_pci_lane_margining; + return rval; +err_dcf_support_pci_lane_margining: + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_support_nvme_encapsulation); + err_dcf_support_nvme_encapsulation: driver_remove_file(&megasas_pci_driver.driver, &driver_attr_support_device_change); @@ -8360,6 +8806,7 @@ static int __init megasas_init(void) err_dcf_attr_ver: pci_unregister_driver(&megasas_pci_driver); err_pcidrv: + megasas_exit_debugfs(); unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); return rval; } @@ -8380,8 +8827,11 @@ static void __exit megasas_exit(void) driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version); driver_remove_file(&megasas_pci_driver.driver, &driver_attr_support_nvme_encapsulation); + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_support_pci_lane_margining); pci_unregister_driver(&megasas_pci_driver); + megasas_exit_debugfs(); unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); } diff --git a/drivers/scsi/megaraid/megaraid_sas_debugfs.c b/drivers/scsi/megaraid/megaraid_sas_debugfs.c new file mode 100644 index 000000000000..c69760775efa --- /dev/null +++ b/drivers/scsi/megaraid/megaraid_sas_debugfs.c @@ -0,0 +1,179 @@ +/* + * Linux MegaRAID driver for SAS based RAID controllers + * + * Copyright (c) 2003-2018 LSI Corporation. + * Copyright (c) 2003-2018 Avago Technologies. + * Copyright (c) 2003-2018 Broadcom Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * Authors: Broadcom Inc. + * Kashyap Desai + * Sumit Saxena + * Shivasharan S + * + * Send feedback to: megaraidlinux.pdl@broadcom.com + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "megaraid_sas_fusion.h" +#include "megaraid_sas.h" + +#ifdef CONFIG_DEBUG_FS +#include + +struct dentry *megasas_debugfs_root; + +static ssize_t +megasas_debugfs_read(struct file *filp, char __user *ubuf, size_t cnt, + loff_t *ppos) +{ + struct megasas_debugfs_buffer *debug = filp->private_data; + + if (!debug || !debug->buf) + return 0; + + return simple_read_from_buffer(ubuf, cnt, ppos, debug->buf, debug->len); +} + +static int +megasas_debugfs_raidmap_open(struct inode *inode, struct file *file) +{ + struct megasas_instance *instance = inode->i_private; + struct megasas_debugfs_buffer *debug; + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + debug = kzalloc(sizeof(struct megasas_debugfs_buffer), GFP_KERNEL); + if (!debug) + return -ENOMEM; + + debug->buf = (void *)fusion->ld_drv_map[(instance->map_id & 1)]; + debug->len = fusion->drv_map_sz; + file->private_data = debug; + + return 0; +} + +static int +megasas_debugfs_release(struct inode *inode, struct file *file) +{ + struct megasas_debug_buffer *debug = file->private_data; + + if (!debug) + return 0; + + file->private_data = NULL; + kfree(debug); + return 0; +} + +static const struct file_operations megasas_debugfs_raidmap_fops = { + .owner = THIS_MODULE, + .open = megasas_debugfs_raidmap_open, + .read = megasas_debugfs_read, + .release = megasas_debugfs_release, +}; + +/* + * megasas_init_debugfs : Create debugfs root for megaraid_sas driver + */ +void megasas_init_debugfs(void) +{ + megasas_debugfs_root = debugfs_create_dir("megaraid_sas", NULL); + if (!megasas_debugfs_root) + pr_info("Cannot create debugfs root\n"); +} + +/* + * megasas_exit_debugfs : Remove debugfs root for megaraid_sas driver + */ +void megasas_exit_debugfs(void) +{ + debugfs_remove_recursive(megasas_debugfs_root); +} + +/* + * megasas_setup_debugfs : Setup debugfs per Fusion adapter + * instance: Soft instance of adapter + */ +void +megasas_setup_debugfs(struct megasas_instance *instance) +{ + char name[64]; + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion) { + snprintf(name, sizeof(name), + "scsi_host%d", instance->host->host_no); + if (!instance->debugfs_root) { + instance->debugfs_root = + debugfs_create_dir(name, megasas_debugfs_root); + if (!instance->debugfs_root) { + dev_err(&instance->pdev->dev, + "Cannot create per adapter debugfs directory\n"); + return; + } + } + + snprintf(name, sizeof(name), "raidmap_dump"); + instance->raidmap_dump = + debugfs_create_file(name, S_IRUGO, + instance->debugfs_root, instance, + &megasas_debugfs_raidmap_fops); + if (!instance->raidmap_dump) { + dev_err(&instance->pdev->dev, + "Cannot create raidmap debugfs file\n"); + debugfs_remove(instance->debugfs_root); + return; + } + } + +} + +/* + * megasas_destroy_debugfs : Destroy debugfs per Fusion adapter + * instance: Soft instance of adapter + */ +void megasas_destroy_debugfs(struct megasas_instance *instance) +{ + debugfs_remove_recursive(instance->debugfs_root); +} + +#else +void megasas_init_debugfs(void) +{ +} +void megasas_exit_debugfs(void) +{ +} +void megasas_setup_debugfs(struct megasas_instance *instance) +{ +} +void megasas_destroy_debugfs(struct megasas_instance *instance) +{ +} +#endif /*CONFIG_DEBUG_FS*/ diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c index 12637606c46d..50b8c1b12767 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -45,7 +46,7 @@ #define LB_PENDING_CMDS_DEFAULT 4 static unsigned int lb_pending_cmds = LB_PENDING_CMDS_DEFAULT; -module_param(lb_pending_cmds, int, S_IRUGO); +module_param(lb_pending_cmds, int, 0444); MODULE_PARM_DESC(lb_pending_cmds, "Change raid-1 load balancing outstanding " "threshold. Valid Values are 1-128. Default: 4"); @@ -888,6 +889,77 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow, return retval; } +/* + * mr_get_phy_params_r56_rmw - Calculate parameters for R56 CTIO write operation + * @instance: Adapter soft state + * @ld: LD index + * @stripNo: Strip Number + * @io_info: IO info structure pointer + * pRAID_Context: RAID context pointer + * map: RAID map pointer + * + * This routine calculates the logical arm, data Arm, row number and parity arm + * for R56 CTIO write operation. + */ +static void mr_get_phy_params_r56_rmw(struct megasas_instance *instance, + u32 ld, u64 stripNo, + struct IO_REQUEST_INFO *io_info, + struct RAID_CONTEXT_G35 *pRAID_Context, + struct MR_DRV_RAID_MAP_ALL *map) +{ + struct MR_LD_RAID *raid = MR_LdRaidGet(ld, map); + u8 span, dataArms, arms, dataArm, logArm; + s8 rightmostParityArm, PParityArm; + u64 rowNum; + u64 *pdBlock = &io_info->pdBlock; + + dataArms = raid->rowDataSize; + arms = raid->rowSize; + + rowNum = mega_div64_32(stripNo, dataArms); + /* parity disk arm, first arm is 0 */ + rightmostParityArm = (arms - 1) - mega_mod64(rowNum, arms); + + /* logical arm within row */ + logArm = mega_mod64(stripNo, dataArms); + /* physical arm for data */ + dataArm = mega_mod64((rightmostParityArm + 1 + logArm), arms); + + if (raid->spanDepth == 1) { + span = 0; + } else { + span = (u8)MR_GetSpanBlock(ld, rowNum, pdBlock, map); + if (span == SPAN_INVALID) + return; + } + + if (raid->level == 6) { + /* P Parity arm, note this can go negative adjust if negative */ + PParityArm = (arms - 2) - mega_mod64(rowNum, arms); + + if (PParityArm < 0) + PParityArm += arms; + + /* rightmostParityArm is P-Parity for RAID 5 and Q-Parity for RAID */ + pRAID_Context->flow_specific.r56_arm_map = rightmostParityArm; + pRAID_Context->flow_specific.r56_arm_map |= + (u16)(PParityArm << RAID_CTX_R56_P_ARM_SHIFT); + } else { + pRAID_Context->flow_specific.r56_arm_map |= + (u16)(rightmostParityArm << RAID_CTX_R56_P_ARM_SHIFT); + } + + pRAID_Context->reg_lock_row_lba = cpu_to_le64(rowNum); + pRAID_Context->flow_specific.r56_arm_map |= + (u16)(logArm << RAID_CTX_R56_LOG_ARM_SHIFT); + cpu_to_le16s(&pRAID_Context->flow_specific.r56_arm_map); + pRAID_Context->span_arm = (span << RAID_CTX_SPANARM_SPAN_SHIFT) | dataArm; + pRAID_Context->raid_flags = (MR_RAID_FLAGS_IO_SUB_TYPE_R56_DIV_OFFLOAD << + MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT); + + return; +} + /* ****************************************************************************** * @@ -954,6 +1026,7 @@ MR_BuildRaidContext(struct megasas_instance *instance, stripSize = 1 << raid->stripeShift; stripe_mask = stripSize-1; + io_info->data_arms = raid->rowDataSize; /* * calculate starting row and stripe, and number of strips and rows @@ -1095,6 +1168,13 @@ MR_BuildRaidContext(struct megasas_instance *instance, /* save pointer to raid->LUN array */ *raidLUN = raid->LUN; + /* Aero R5/6 Division Offload for WRITE */ + if (fusion->r56_div_offload && (raid->level >= 5) && !isRead) { + mr_get_phy_params_r56_rmw(instance, ld, start_strip, io_info, + (struct RAID_CONTEXT_G35 *)pRAID_Context, + map); + return true; + } /*Get Phy Params only if FP capable, or else leave it to MR firmware to do the calculation.*/ diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 4dfa0685a86c..a32b3f0fcd15 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -86,6 +87,62 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance); extern u32 megasas_readl(struct megasas_instance *instance, const volatile void __iomem *addr); +/** + * megasas_adp_reset_wait_for_ready - initiate chip reset and wait for + * controller to come to ready state + * @instance - adapter's soft state + * @do_adp_reset - If true, do a chip reset + * @ocr_context - If called from OCR context this will + * be set to 1, else 0 + * + * This function initates a chip reset followed by a wait for controller to + * transition to ready state. + * During this, driver will block all access to PCI config space from userspace + */ +int +megasas_adp_reset_wait_for_ready(struct megasas_instance *instance, + bool do_adp_reset, + int ocr_context) +{ + int ret = FAILED; + + /* + * Block access to PCI config space from userspace + * when diag reset is initiated from driver + */ + if (megasas_dbg_lvl & OCR_DEBUG) + dev_info(&instance->pdev->dev, + "Block access to PCI config space %s %d\n", + __func__, __LINE__); + + pci_cfg_access_lock(instance->pdev); + + if (do_adp_reset) { + if (instance->instancet->adp_reset + (instance, instance->reg_set)) + goto out; + } + + /* Wait for FW to become ready */ + if (megasas_transition_to_ready(instance, ocr_context)) { + dev_warn(&instance->pdev->dev, + "Failed to transition controller to ready for scsi%d.\n", + instance->host->host_no); + goto out; + } + + ret = SUCCESS; +out: + if (megasas_dbg_lvl & OCR_DEBUG) + dev_info(&instance->pdev->dev, + "Unlock access to PCI config space %s %d\n", + __func__, __LINE__); + + pci_cfg_access_unlock(instance->pdev); + + return ret; +} + /** * megasas_check_same_4gb_region - check if allocation * crosses same 4GB boundary or not @@ -133,7 +190,8 @@ megasas_enable_intr_fusion(struct megasas_instance *instance) writel(~MFI_FUSION_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask); /* Dummy readl to force pci flush */ - readl(®s->outbound_intr_mask); + dev_info(&instance->pdev->dev, "%s is called outbound_intr_mask:0x%08x\n", + __func__, readl(®s->outbound_intr_mask)); } /** @@ -144,14 +202,14 @@ void megasas_disable_intr_fusion(struct megasas_instance *instance) { u32 mask = 0xFFFFFFFF; - u32 status; struct megasas_register_set __iomem *regs; regs = instance->reg_set; instance->mask_interrupts = 1; writel(mask, ®s->outbound_intr_mask); /* Dummy readl to force pci flush */ - status = readl(®s->outbound_intr_mask); + dev_info(&instance->pdev->dev, "%s is called outbound_intr_mask:0x%08x\n", + __func__, readl(®s->outbound_intr_mask)); } int @@ -207,21 +265,17 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance, } /** - * megasas_fire_cmd_fusion - Sends command to the FW - * @instance: Adapter soft state - * @req_desc: 64bit Request descriptor - * - * Perform PCI Write. + * megasas_write_64bit_req_desc - PCI writes 64bit request descriptor + * @instance: Adapter soft state + * @req_desc: 64bit Request descriptor */ - static void -megasas_fire_cmd_fusion(struct megasas_instance *instance, +megasas_write_64bit_req_desc(struct megasas_instance *instance, union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc) { #if defined(writeq) && defined(CONFIG_64BIT) u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) | le32_to_cpu(req_desc->u.low)); - writeq(req_data, &instance->reg_set->inbound_low_queue_port); #else unsigned long flags; @@ -234,6 +288,25 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance, #endif } +/** + * megasas_fire_cmd_fusion - Sends command to the FW + * @instance: Adapter soft state + * @req_desc: 32bit or 64bit Request descriptor + * + * Perform PCI Write. AERO SERIES supports 32 bit Descriptor. + * Prior to AERO_SERIES support 64 bit Descriptor. + */ +static void +megasas_fire_cmd_fusion(struct megasas_instance *instance, + union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc) +{ + if (instance->atomic_desc_support) + writel(le32_to_cpu(req_desc->u.low), + &instance->reg_set->inbound_single_queue_port); + else + megasas_write_64bit_req_desc(instance, req_desc); +} + /** * megasas_fusion_update_can_queue - Do all Adapter Queue depth related calculations here * @instance: Adapter soft state @@ -924,6 +997,7 @@ wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd, { int i; struct megasas_header *frame_hdr = &cmd->frame->hdr; + u32 status_reg; u32 msecs = seconds * 1000; @@ -933,6 +1007,12 @@ wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd, for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i += 20) { rmb(); msleep(20); + if (!(i % 5000)) { + status_reg = instance->instancet->read_fw_status_reg(instance) + & MFI_STATE_MASK; + if (status_reg == MFI_STATE_FAULT) + break; + } } if (frame_hdr->cmd_status == MFI_STAT_INVALID_STATUS) @@ -966,6 +1046,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) u32 scratch_pad_1; ktime_t time; bool cur_fw_64bit_dma_capable; + bool cur_intr_coalescing; fusion = instance->ctrl_context; @@ -999,6 +1080,16 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) goto fail_fw_init; } + cur_intr_coalescing = (scratch_pad_1 & MR_INTR_COALESCING_SUPPORT_OFFSET) ? + true : false; + + if ((instance->low_latency_index_start == + MR_HIGH_IOPS_QUEUE_COUNT) && cur_intr_coalescing) + instance->perf_mode = MR_BALANCED_PERF_MODE; + + dev_info(&instance->pdev->dev, "Performance mode :%s\n", + MEGASAS_PERF_MODE_2STR(instance->perf_mode)); + instance->fw_sync_cache_support = (scratch_pad_1 & MR_CAN_HANDLE_SYNC_CACHE_OFFSET) ? 1 : 0; dev_info(&instance->pdev->dev, "FW supports sync cache\t: %s\n", @@ -1083,6 +1174,22 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) cpu_to_le32(lower_32_bits(ioc_init_handle)); init_frame->data_xfer_len = cpu_to_le32(sizeof(struct MPI2_IOC_INIT_REQUEST)); + /* + * Each bit in replyqueue_mask represents one group of MSI-x vectors + * (each group has 8 vectors) + */ + switch (instance->perf_mode) { + case MR_BALANCED_PERF_MODE: + init_frame->replyqueue_mask = + cpu_to_le16(~(~0 << instance->low_latency_index_start/8)); + break; + case MR_IOPS_PERF_MODE: + init_frame->replyqueue_mask = + cpu_to_le16(~(~0 << instance->msix_vectors/8)); + break; + } + + req_desc.u.low = cpu_to_le32(lower_32_bits(cmd->frame_phys_addr)); req_desc.u.high = cpu_to_le32(upper_32_bits(cmd->frame_phys_addr)); req_desc.MFAIo.RequestFlags = @@ -1101,7 +1208,8 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) break; } - megasas_fire_cmd_fusion(instance, &req_desc); + /* For AERO also, IOC_INIT requires 64 bit descriptor write */ + megasas_write_64bit_req_desc(instance, &req_desc); wait_and_poll(instance, cmd, MFI_IO_TIMEOUT_SECS); @@ -1111,6 +1219,17 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) goto fail_fw_init; } + if (instance->adapter_type >= AERO_SERIES) { + scratch_pad_1 = megasas_readl + (instance, &instance->reg_set->outbound_scratch_pad_1); + + instance->atomic_desc_support = + (scratch_pad_1 & MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET) ? 1 : 0; + + dev_info(&instance->pdev->dev, "FW supports atomic descriptor\t: %s\n", + instance->atomic_desc_support ? "Yes" : "No"); + } + return 0; fail_fw_init: @@ -1133,7 +1252,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) int megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend) { int ret = 0; - u32 pd_seq_map_sz; + size_t pd_seq_map_sz; struct megasas_cmd *cmd; struct megasas_dcmd_frame *dcmd; struct fusion_context *fusion = instance->ctrl_context; @@ -1142,9 +1261,7 @@ megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend) { pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id & 1)]; pd_seq_h = fusion->pd_seq_phys[(instance->pd_seq_map_id & 1)]; - pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + - (sizeof(struct MR_PD_CFG_SEQ) * - (MAX_PHYSICAL_DEVICES - 1)); + pd_seq_map_sz = struct_size(pd_sync, seq, MAX_PHYSICAL_DEVICES - 1); cmd = megasas_get_cmd(instance); if (!cmd) { @@ -1625,6 +1742,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) struct fusion_context *fusion; u32 scratch_pad_1; int i = 0, count; + u32 status_reg; fusion = instance->ctrl_context; @@ -1707,8 +1825,21 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) if (megasas_alloc_cmds_fusion(instance)) goto fail_alloc_cmds; - if (megasas_ioc_init_fusion(instance)) - goto fail_ioc_init; + if (megasas_ioc_init_fusion(instance)) { + status_reg = instance->instancet->read_fw_status_reg(instance); + if (((status_reg & MFI_STATE_MASK) == MFI_STATE_FAULT) && + (status_reg & MFI_RESET_ADAPTER)) { + /* Do a chip reset and then retry IOC INIT once */ + if (megasas_adp_reset_wait_for_ready + (instance, true, 0) == FAILED) + goto fail_ioc_init; + + if (megasas_ioc_init_fusion(instance)) + goto fail_ioc_init; + } else { + goto fail_ioc_init; + } + } megasas_display_intel_branding(instance); if (megasas_get_ctrl_info(instance)) { @@ -1720,6 +1851,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) instance->flag_ieee = 1; instance->r1_ldio_hint_default = MR_R1_LDIO_PIGGYBACK_DEFAULT; + instance->threshold_reply_count = instance->max_fw_cmds / 4; fusion->fast_path_io = 0; if (megasas_allocate_raid_maps(instance)) @@ -1970,7 +2102,6 @@ megasas_is_prp_possible(struct megasas_instance *instance, mega_mod64(sg_dma_address(sg_scmd), mr_nvme_pg_size)) { build_prp = false; - atomic_inc(&instance->sge_holes_type1); break; } } @@ -1980,7 +2111,6 @@ megasas_is_prp_possible(struct megasas_instance *instance, sg_dma_len(sg_scmd)), mr_nvme_pg_size))) { build_prp = false; - atomic_inc(&instance->sge_holes_type2); break; } } @@ -1989,7 +2119,6 @@ megasas_is_prp_possible(struct megasas_instance *instance, if (mega_mod64(sg_dma_address(sg_scmd), mr_nvme_pg_size)) { build_prp = false; - atomic_inc(&instance->sge_holes_type3); break; } } @@ -2122,7 +2251,6 @@ megasas_make_prp_nvme(struct megasas_instance *instance, struct scsi_cmnd *scmd, main_chain_element->Length = cpu_to_le32(num_prp_in_chain * sizeof(u64)); - atomic_inc(&instance->prp_sgl); return build_prp; } @@ -2197,7 +2325,6 @@ megasas_make_sgl_fusion(struct megasas_instance *instance, memset(sgl_ptr, 0, instance->max_chain_frame_sz); } } - atomic_inc(&instance->ieee_sgl); } /** @@ -2509,9 +2636,10 @@ static void megasas_stream_detect(struct megasas_instance *instance, * */ static void -megasas_set_raidflag_cpu_affinity(union RAID_CONTEXT_UNION *praid_context, - struct MR_LD_RAID *raid, bool fp_possible, - u8 is_read, u32 scsi_buff_len) +megasas_set_raidflag_cpu_affinity(struct fusion_context *fusion, + union RAID_CONTEXT_UNION *praid_context, + struct MR_LD_RAID *raid, bool fp_possible, + u8 is_read, u32 scsi_buff_len) { u8 cpu_sel = MR_RAID_CTX_CPUSEL_0; struct RAID_CONTEXT_G35 *rctx_g35; @@ -2569,11 +2697,11 @@ megasas_set_raidflag_cpu_affinity(union RAID_CONTEXT_UNION *praid_context, * vs MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS. * IO Subtype is not bitmap. */ - if ((raid->level == 1) && (!is_read)) { - if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE) - praid_context->raid_context_g35.raid_flags = - (MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT - << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT); + if ((fusion->pcie_bw_limitation) && (raid->level == 1) && (!is_read) && + (scsi_buff_len > MR_LARGE_IO_MIN_SIZE)) { + praid_context->raid_context_g35.raid_flags = + (MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT + << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT); } } @@ -2679,6 +2807,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, io_info.r1_alt_dev_handle = MR_DEVHANDLE_INVALID; scsi_buff_len = scsi_bufflen(scp); io_request->DataLength = cpu_to_le32(scsi_buff_len); + io_info.data_arms = 1; if (scp->sc_data_direction == DMA_FROM_DEVICE) io_info.isRead = 1; @@ -2698,8 +2827,19 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, fp_possible = (io_info.fpOkForIo > 0) ? true : false; } - cmd->request_desc->SCSIIO.MSIxIndex = - instance->reply_map[raw_smp_processor_id()]; + if ((instance->perf_mode == MR_BALANCED_PERF_MODE) && + atomic_read(&scp->device->device_busy) > + (io_info.data_arms * MR_DEVICE_HIGH_IOPS_DEPTH)) + cmd->request_desc->SCSIIO.MSIxIndex = + mega_mod64((atomic64_add_return(1, &instance->high_iops_outstanding) / + MR_HIGH_IOPS_BATCH_COUNT), instance->low_latency_index_start); + else if (instance->msix_load_balance) + cmd->request_desc->SCSIIO.MSIxIndex = + (mega_mod64(atomic64_add_return(1, &instance->total_io_count), + instance->msix_vectors)); + else + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; if (instance->adapter_type >= VENTURA_SERIES) { /* FP for Optimal raid level 1. @@ -2717,8 +2857,9 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, (instance->host->can_queue)) { fp_possible = false; atomic_dec(&instance->fw_outstanding); - } else if ((scsi_buff_len > MR_LARGE_IO_MIN_SIZE) || - (atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint) > 0)) { + } else if (fusion->pcie_bw_limitation && + ((scsi_buff_len > MR_LARGE_IO_MIN_SIZE) || + (atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint) > 0))) { fp_possible = false; atomic_dec(&instance->fw_outstanding); if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE) @@ -2743,7 +2884,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, /* If raid is NULL, set CPU affinity to default CPU0 */ if (raid) - megasas_set_raidflag_cpu_affinity(&io_request->RaidContext, + megasas_set_raidflag_cpu_affinity(fusion, &io_request->RaidContext, raid, fp_possible, io_info.isRead, scsi_buff_len); else @@ -2759,10 +2900,6 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, (MPI2_REQ_DESCRIPT_FLAGS_FP_IO << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); if (instance->adapter_type == INVADER_SERIES) { - if (rctx->reg_lock_flags == REGION_TYPE_UNUSED) - cmd->request_desc->SCSIIO.RequestFlags = - (MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK << - MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); rctx->type = MPI2_TYPE_CUDA; rctx->nseg = 0x1; io_request->IoFlags |= cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH); @@ -2970,50 +3107,71 @@ megasas_build_syspd_fusion(struct megasas_instance *instance, << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT; /* If FW supports PD sequence number */ - if (instance->use_seqnum_jbod_fp && - instance->pd_list[pd_index].driveType == TYPE_DISK) { - /* TgtId must be incremented by 255 as jbod seq number is index - * below raid map - */ - /* More than 256 PD/JBOD support for Ventura */ - if (instance->support_morethan256jbod) - pRAID_Context->virtual_disk_tgt_id = - pd_sync->seq[pd_index].pd_target_id; - else - pRAID_Context->virtual_disk_tgt_id = - cpu_to_le16(device_id + (MAX_PHYSICAL_DEVICES - 1)); - pRAID_Context->config_seq_num = pd_sync->seq[pd_index].seqNum; - io_request->DevHandle = pd_sync->seq[pd_index].devHandle; - if (instance->adapter_type >= VENTURA_SERIES) { - io_request->RaidContext.raid_context_g35.routing_flags |= - (1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT); - io_request->RaidContext.raid_context_g35.nseg_type |= - (1 << RAID_CONTEXT_NSEG_SHIFT); - io_request->RaidContext.raid_context_g35.nseg_type |= - (MPI2_TYPE_CUDA << RAID_CONTEXT_TYPE_SHIFT); + if (instance->support_seqnum_jbod_fp) { + if (instance->use_seqnum_jbod_fp && + instance->pd_list[pd_index].driveType == TYPE_DISK) { + + /* More than 256 PD/JBOD support for Ventura */ + if (instance->support_morethan256jbod) + pRAID_Context->virtual_disk_tgt_id = + pd_sync->seq[pd_index].pd_target_id; + else + pRAID_Context->virtual_disk_tgt_id = + cpu_to_le16(device_id + + (MAX_PHYSICAL_DEVICES - 1)); + pRAID_Context->config_seq_num = + pd_sync->seq[pd_index].seqNum; + io_request->DevHandle = + pd_sync->seq[pd_index].devHandle; + if (instance->adapter_type >= VENTURA_SERIES) { + io_request->RaidContext.raid_context_g35.routing_flags |= + (1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT); + io_request->RaidContext.raid_context_g35.nseg_type |= + (1 << RAID_CONTEXT_NSEG_SHIFT); + io_request->RaidContext.raid_context_g35.nseg_type |= + (MPI2_TYPE_CUDA << RAID_CONTEXT_TYPE_SHIFT); + } else { + pRAID_Context->type = MPI2_TYPE_CUDA; + pRAID_Context->nseg = 0x1; + pRAID_Context->reg_lock_flags |= + (MR_RL_FLAGS_SEQ_NUM_ENABLE | + MR_RL_FLAGS_GRANT_DESTINATION_CUDA); + } } else { - pRAID_Context->type = MPI2_TYPE_CUDA; - pRAID_Context->nseg = 0x1; - pRAID_Context->reg_lock_flags |= - (MR_RL_FLAGS_SEQ_NUM_ENABLE|MR_RL_FLAGS_GRANT_DESTINATION_CUDA); + pRAID_Context->virtual_disk_tgt_id = + cpu_to_le16(device_id + + (MAX_PHYSICAL_DEVICES - 1)); + pRAID_Context->config_seq_num = 0; + io_request->DevHandle = cpu_to_le16(0xFFFF); } - } else if (fusion->fast_path_io) { - pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id); - pRAID_Context->config_seq_num = 0; - local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)]; - io_request->DevHandle = - local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; } else { - /* Want to send all IO via FW path */ pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id); pRAID_Context->config_seq_num = 0; - io_request->DevHandle = cpu_to_le16(0xFFFF); + + if (fusion->fast_path_io) { + local_map_ptr = + fusion->ld_drv_map[(instance->map_id & 1)]; + io_request->DevHandle = + local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; + } else { + io_request->DevHandle = cpu_to_le16(0xFFFF); + } } cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; - cmd->request_desc->SCSIIO.MSIxIndex = - instance->reply_map[raw_smp_processor_id()]; + if ((instance->perf_mode == MR_BALANCED_PERF_MODE) && + atomic_read(&scmd->device->device_busy) > MR_DEVICE_HIGH_IOPS_DEPTH) + cmd->request_desc->SCSIIO.MSIxIndex = + mega_mod64((atomic64_add_return(1, &instance->high_iops_outstanding) / + MR_HIGH_IOPS_BATCH_COUNT), instance->low_latency_index_start); + else if (instance->msix_load_balance) + cmd->request_desc->SCSIIO.MSIxIndex = + (mega_mod64(atomic64_add_return(1, &instance->total_io_count), + instance->msix_vectors)); + else + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; if (!fp_possible) { /* system pd firmware path */ @@ -3193,9 +3351,9 @@ void megasas_prepare_secondRaid1_IO(struct megasas_instance *instance, r1_cmd->request_desc->SCSIIO.DevHandle = cmd->r1_alt_dev_handle; r1_cmd->io_request->DevHandle = cmd->r1_alt_dev_handle; r1_cmd->r1_alt_dev_handle = cmd->io_request->DevHandle; - cmd->io_request->RaidContext.raid_context_g35.smid.peer_smid = + cmd->io_request->RaidContext.raid_context_g35.flow_specific.peer_smid = cpu_to_le16(r1_cmd->index); - r1_cmd->io_request->RaidContext.raid_context_g35.smid.peer_smid = + r1_cmd->io_request->RaidContext.raid_context_g35.flow_specific.peer_smid = cpu_to_le16(cmd->index); /*MSIxIndex of both commands request descriptors should be same*/ r1_cmd->request_desc->SCSIIO.MSIxIndex = @@ -3313,7 +3471,7 @@ megasas_complete_r1_command(struct megasas_instance *instance, rctx_g35 = &cmd->io_request->RaidContext.raid_context_g35; fusion = instance->ctrl_context; - peer_smid = le16_to_cpu(rctx_g35->smid.peer_smid); + peer_smid = le16_to_cpu(rctx_g35->flow_specific.peer_smid); r1_cmd = fusion->cmd_list[peer_smid - 1]; scmd_local = cmd->scmd; @@ -3353,7 +3511,8 @@ megasas_complete_r1_command(struct megasas_instance *instance, * Completes all commands that is in reply descriptor queue */ int -complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex) +complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex, + struct megasas_irq_context *irq_context) { union MPI2_REPLY_DESCRIPTORS_UNION *desc; struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc; @@ -3486,7 +3645,7 @@ complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex) * number of reply counts and still there are more replies in reply queue * pending to be completed */ - if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) { + if (threshold_reply_count >= instance->threshold_reply_count) { if (instance->msix_combined) writel(((MSIxIndex & 0x7) << 24) | fusion->last_reply_idx[MSIxIndex], @@ -3496,23 +3655,46 @@ complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex) fusion->last_reply_idx[MSIxIndex], instance->reply_post_host_index_addr[0]); threshold_reply_count = 0; + if (irq_context) { + if (!irq_context->irq_poll_scheduled) { + irq_context->irq_poll_scheduled = true; + irq_context->irq_line_enable = true; + irq_poll_sched(&irq_context->irqpoll); + } + return num_completed; + } } } - if (!num_completed) - return IRQ_NONE; + if (num_completed) { + wmb(); + if (instance->msix_combined) + writel(((MSIxIndex & 0x7) << 24) | + fusion->last_reply_idx[MSIxIndex], + instance->reply_post_host_index_addr[MSIxIndex/8]); + else + writel((MSIxIndex << 24) | + fusion->last_reply_idx[MSIxIndex], + instance->reply_post_host_index_addr[0]); + megasas_check_and_restore_queue_depth(instance); + } + return num_completed; +} - wmb(); - if (instance->msix_combined) - writel(((MSIxIndex & 0x7) << 24) | - fusion->last_reply_idx[MSIxIndex], - instance->reply_post_host_index_addr[MSIxIndex/8]); - else - writel((MSIxIndex << 24) | - fusion->last_reply_idx[MSIxIndex], - instance->reply_post_host_index_addr[0]); - megasas_check_and_restore_queue_depth(instance); - return IRQ_HANDLED; +/** + * megasas_enable_irq_poll() - enable irqpoll + */ +static void megasas_enable_irq_poll(struct megasas_instance *instance) +{ + u32 count, i; + struct megasas_irq_context *irq_ctx; + + count = instance->msix_vectors > 0 ? instance->msix_vectors : 1; + + for (i = 0; i < count; i++) { + irq_ctx = &instance->irq_context[i]; + irq_poll_enable(&irq_ctx->irqpoll); + } } /** @@ -3524,11 +3706,51 @@ void megasas_sync_irqs(unsigned long instance_addr) u32 count, i; struct megasas_instance *instance = (struct megasas_instance *)instance_addr; + struct megasas_irq_context *irq_ctx; count = instance->msix_vectors > 0 ? instance->msix_vectors : 1; - for (i = 0; i < count; i++) + for (i = 0; i < count; i++) { synchronize_irq(pci_irq_vector(instance->pdev, i)); + irq_ctx = &instance->irq_context[i]; + irq_poll_disable(&irq_ctx->irqpoll); + if (irq_ctx->irq_poll_scheduled) { + irq_ctx->irq_poll_scheduled = false; + enable_irq(irq_ctx->os_irq); + } + } +} + +/** + * megasas_irqpoll() - process a queue for completed reply descriptors + * @irqpoll: IRQ poll structure associated with queue to poll. + * @budget: Threshold of reply descriptors to process per poll. + * + * Return: The number of entries processed. + */ + +int megasas_irqpoll(struct irq_poll *irqpoll, int budget) +{ + struct megasas_irq_context *irq_ctx; + struct megasas_instance *instance; + int num_entries; + + irq_ctx = container_of(irqpoll, struct megasas_irq_context, irqpoll); + instance = irq_ctx->instance; + + if (irq_ctx->irq_line_enable) { + disable_irq(irq_ctx->os_irq); + irq_ctx->irq_line_enable = false; + } + + num_entries = complete_cmd_fusion(instance, irq_ctx->MSIxIndex, irq_ctx); + if (num_entries < budget) { + irq_poll_complete(irqpoll); + irq_ctx->irq_poll_scheduled = false; + enable_irq(irq_ctx->os_irq); + } + + return num_entries; } /** @@ -3551,7 +3773,7 @@ megasas_complete_cmd_dpc_fusion(unsigned long instance_addr) return; for (MSIxIndex = 0 ; MSIxIndex < count; MSIxIndex++) - complete_cmd_fusion(instance, MSIxIndex); + complete_cmd_fusion(instance, MSIxIndex, NULL); } /** @@ -3566,6 +3788,11 @@ irqreturn_t megasas_isr_fusion(int irq, void *devp) if (instance->mask_interrupts) return IRQ_NONE; +#if defined(ENABLE_IRQ_POLL) + if (irq_context->irq_poll_scheduled) + return IRQ_HANDLED; +#endif + if (!instance->msix_vectors) { mfiStatus = instance->instancet->clear_intr(instance); if (!mfiStatus) @@ -3578,7 +3805,8 @@ irqreturn_t megasas_isr_fusion(int irq, void *devp) return IRQ_HANDLED; } - return complete_cmd_fusion(instance, irq_context->MSIxIndex); + return complete_cmd_fusion(instance, irq_context->MSIxIndex, irq_context) + ? IRQ_HANDLED : IRQ_NONE; } /** @@ -3843,7 +4071,7 @@ megasas_check_reset_fusion(struct megasas_instance *instance, static inline void megasas_trigger_snap_dump(struct megasas_instance *instance) { int j; - u32 fw_state; + u32 fw_state, abs_state; if (!instance->disableOnlineCtrlReset) { dev_info(&instance->pdev->dev, "Trigger snap dump\n"); @@ -3853,11 +4081,13 @@ static inline void megasas_trigger_snap_dump(struct megasas_instance *instance) } for (j = 0; j < instance->snapdump_wait_time; j++) { - fw_state = instance->instancet->read_fw_status_reg(instance) & - MFI_STATE_MASK; + abs_state = instance->instancet->read_fw_status_reg(instance); + fw_state = abs_state & MFI_STATE_MASK; if (fw_state == MFI_STATE_FAULT) { - dev_err(&instance->pdev->dev, - "Found FW in FAULT state, after snap dump trigger\n"); + dev_printk(KERN_ERR, &instance->pdev->dev, + "FW in FAULT state Fault code:0x%x subcode:0x%x func:%s\n", + abs_state & MFI_STATE_FAULT_CODE, + abs_state & MFI_STATE_FAULT_SUBCODE, __func__); return; } msleep(1000); @@ -3869,7 +4099,7 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance, int reason, int *convert) { int i, outstanding, retval = 0, hb_seconds_missed = 0; - u32 fw_state; + u32 fw_state, abs_state; u32 waittime_for_io_completion; waittime_for_io_completion = @@ -3888,12 +4118,13 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance, for (i = 0; i < waittime_for_io_completion; i++) { /* Check if firmware is in fault state */ - fw_state = instance->instancet->read_fw_status_reg(instance) & - MFI_STATE_MASK; + abs_state = instance->instancet->read_fw_status_reg(instance); + fw_state = abs_state & MFI_STATE_MASK; if (fw_state == MFI_STATE_FAULT) { - dev_warn(&instance->pdev->dev, "Found FW in FAULT state," - " will reset adapter scsi%d.\n", - instance->host->host_no); + dev_printk(KERN_ERR, &instance->pdev->dev, + "FW in FAULT state Fault code:0x%x subcode:0x%x func:%s\n", + abs_state & MFI_STATE_FAULT_CODE, + abs_state & MFI_STATE_FAULT_SUBCODE, __func__); megasas_complete_cmd_dpc_fusion((unsigned long)instance); if (instance->requestorId && reason) { dev_warn(&instance->pdev->dev, "SR-IOV Found FW in FAULT" @@ -4041,6 +4272,13 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance) result = COMPLETE_CMD; } + break; + case MFI_CMD_TOOLBOX: + if (!instance->support_pci_lane_margining) { + cmd_mfi->frame->hdr.cmd_status = MFI_STAT_INVALID_CMD; + result = COMPLETE_CMD; + } + break; default: break; @@ -4265,6 +4503,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle, instance->instancet->disable_intr(instance); megasas_sync_irqs((unsigned long)instance); instance->instancet->enable_intr(instance); + megasas_enable_irq_poll(instance); if (scsi_lookup->scmd == NULL) break; } @@ -4278,6 +4517,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle, megasas_sync_irqs((unsigned long)instance); rc = megasas_track_scsiio(instance, id, channel); instance->instancet->enable_intr(instance); + megasas_enable_irq_poll(instance); break; case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET: @@ -4376,9 +4616,6 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd) instance = (struct megasas_instance *)scmd->device->host->hostdata; - scmd_printk(KERN_INFO, scmd, "task abort called for scmd(%p)\n", scmd); - scsi_print_command(scmd); - if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) { dev_err(&instance->pdev->dev, "Controller is not OPERATIONAL," "SCSI host:%d\n", instance->host->host_no); @@ -4421,7 +4658,7 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd) goto out; } sdev_printk(KERN_INFO, scmd->device, - "attempting task abort! scmd(%p) tm_dev_handle 0x%x\n", + "attempting task abort! scmd(0x%p) tm_dev_handle 0x%x\n", scmd, devhandle); mr_device_priv_data->tm_busy = 1; @@ -4432,9 +4669,12 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd) mr_device_priv_data->tm_busy = 0; mutex_unlock(&instance->reset_mutex); -out: - sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n", + scmd_printk(KERN_INFO, scmd, "task abort %s!! scmd(0x%p)\n", ((ret == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); +out: + scsi_print_command(scmd); + if (megasas_dbg_lvl & TM_DEBUG) + megasas_dump_fusion_io(scmd); return ret; } @@ -4457,9 +4697,6 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) instance = (struct megasas_instance *)scmd->device->host->hostdata; - sdev_printk(KERN_INFO, scmd->device, - "target reset called for scmd(%p)\n", scmd); - if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) { dev_err(&instance->pdev->dev, "Controller is not OPERATIONAL," "SCSI host:%d\n", instance->host->host_no); @@ -4468,8 +4705,8 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) } if (!mr_device_priv_data) { - sdev_printk(KERN_INFO, scmd->device, "device been deleted! " - "scmd(%p)\n", scmd); + sdev_printk(KERN_INFO, scmd->device, + "device been deleted! scmd: (0x%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; ret = SUCCESS; goto out; @@ -4492,7 +4729,7 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) } sdev_printk(KERN_INFO, scmd->device, - "attempting target reset! scmd(%p) tm_dev_handle 0x%x\n", + "attempting target reset! scmd(0x%p) tm_dev_handle: 0x%x\n", scmd, devhandle); mr_device_priv_data->tm_busy = 1; ret = megasas_issue_tm(instance, devhandle, @@ -4501,10 +4738,10 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) mr_device_priv_data); mr_device_priv_data->tm_busy = 0; mutex_unlock(&instance->reset_mutex); -out: - scmd_printk(KERN_NOTICE, scmd, "megasas: target reset %s!!\n", + scmd_printk(KERN_NOTICE, scmd, "target reset %s!!\n", (ret == SUCCESS) ? "SUCCESS" : "FAILED"); +out: return ret; } @@ -4549,12 +4786,14 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) struct megasas_instance *instance; struct megasas_cmd_fusion *cmd_fusion, *r1_cmd; struct fusion_context *fusion; - u32 abs_state, status_reg, reset_adapter; + u32 abs_state, status_reg, reset_adapter, fpio_count = 0; u32 io_timeout_in_crash_mode = 0; struct scsi_cmnd *scmd_local = NULL; struct scsi_device *sdev; int ret_target_prop = DCMD_FAILED; bool is_target_prop = false; + bool do_adp_reset = true; + int max_reset_tries = MEGASAS_FUSION_MAX_RESET_TRIES; instance = (struct megasas_instance *)shost->hostdata; fusion = instance->ctrl_context; @@ -4621,7 +4860,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) if (convert) reason = 0; - if (megasas_dbg_lvl & OCR_LOGS) + if (megasas_dbg_lvl & OCR_DEBUG) dev_info(&instance->pdev->dev, "\nPending SCSI commands:\n"); /* Now return commands back to the OS */ @@ -4634,13 +4873,17 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) } scmd_local = cmd_fusion->scmd; if (cmd_fusion->scmd) { - if (megasas_dbg_lvl & OCR_LOGS) { + if (megasas_dbg_lvl & OCR_DEBUG) { sdev_printk(KERN_INFO, cmd_fusion->scmd->device, "SMID: 0x%x\n", cmd_fusion->index); - scsi_print_command(cmd_fusion->scmd); + megasas_dump_fusion_io(cmd_fusion->scmd); } + if (cmd_fusion->io_request->Function == + MPI2_FUNCTION_SCSI_IO_REQUEST) + fpio_count++; + scmd_local->result = megasas_check_mpio_paths(instance, scmd_local); @@ -4653,6 +4896,9 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) } } + dev_info(&instance->pdev->dev, "Outstanding fastpath IOs: %d\n", + fpio_count); + atomic_set(&instance->fw_outstanding, 0); status_reg = instance->instancet->read_fw_status_reg(instance); @@ -4664,52 +4910,45 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) dev_warn(&instance->pdev->dev, "Reset not supported" ", killing adapter scsi%d.\n", instance->host->host_no); - megaraid_sas_kill_hba(instance); - instance->skip_heartbeat_timer_del = 1; - retval = FAILED; - goto out; + goto kill_hba; } /* Let SR-IOV VF & PF sync up if there was a HB failure */ if (instance->requestorId && !reason) { msleep(MEGASAS_OCR_SETTLE_TIME_VF); - goto transition_to_ready; + do_adp_reset = false; + max_reset_tries = MEGASAS_SRIOV_MAX_RESET_TRIES_VF; } /* Now try to reset the chip */ - for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) { - - if (instance->instancet->adp_reset - (instance, instance->reg_set)) + for (i = 0; i < max_reset_tries; i++) { + /* + * Do adp reset and wait for + * controller to transition to ready + */ + if (megasas_adp_reset_wait_for_ready(instance, + do_adp_reset, 1) == FAILED) continue; -transition_to_ready: + /* Wait for FW to become ready */ if (megasas_transition_to_ready(instance, 1)) { dev_warn(&instance->pdev->dev, "Failed to transition controller to ready for " "scsi%d.\n", instance->host->host_no); - if (instance->requestorId && !reason) - goto fail_kill_adapter; - else - continue; + continue; } megasas_reset_reply_desc(instance); megasas_fusion_update_can_queue(instance, OCR_CONTEXT); if (megasas_ioc_init_fusion(instance)) { - if (instance->requestorId && !reason) - goto fail_kill_adapter; - else - continue; + continue; } if (megasas_get_ctrl_info(instance)) { dev_info(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__); - megaraid_sas_kill_hba(instance); - retval = FAILED; - goto out; + goto kill_hba; } megasas_refire_mgmt_cmd(instance); @@ -4738,7 +4977,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); instance->instancet->enable_intr(instance); - + megasas_enable_irq_poll(instance); shost_for_each_device(sdev, shost) { if ((instance->tgt_prop) && (instance->nvme_page_size)) @@ -4750,9 +4989,9 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL); - dev_info(&instance->pdev->dev, "Interrupts are enabled and" - " controller is OPERATIONAL for scsi:%d\n", - instance->host->host_no); + dev_info(&instance->pdev->dev, + "Adapter is OPERATIONAL for scsi:%d\n", + instance->host->host_no); /* Restart SR-IOV heartbeat */ if (instance->requestorId) { @@ -4786,13 +5025,10 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) goto out; } -fail_kill_adapter: /* Reset failed, kill the adapter */ dev_warn(&instance->pdev->dev, "Reset failed, killing " "adapter scsi%d.\n", instance->host->host_no); - megaraid_sas_kill_hba(instance); - instance->skip_heartbeat_timer_del = 1; - retval = FAILED; + goto kill_hba; } else { /* For VF: Restart HB timer if we didn't OCR */ if (instance->requestorId) { @@ -4800,8 +5036,15 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason) } clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); instance->instancet->enable_intr(instance); + megasas_enable_irq_poll(instance); atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL); + goto out; } +kill_hba: + megaraid_sas_kill_hba(instance); + megasas_enable_irq_poll(instance); + instance->skip_heartbeat_timer_del = 1; + retval = FAILED; out: clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); mutex_unlock(&instance->reset_mutex); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 7fa73eaca1a8..c013c80fe4e6 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -75,7 +75,8 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { MR_RAID_FLAGS_IO_SUB_TYPE_RMW_P = 3, MR_RAID_FLAGS_IO_SUB_TYPE_RMW_Q = 4, MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS = 6, - MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7 + MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7, + MR_RAID_FLAGS_IO_SUB_TYPE_R56_DIV_OFFLOAD = 8 }; /* @@ -88,7 +89,6 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define MEGASAS_FP_CMD_LEN 16 #define MEGASAS_FUSION_IN_RESET 0 -#define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 #define MEGASAS_REDUCE_QD_COUNT 64 @@ -140,12 +140,15 @@ struct RAID_CONTEXT_G35 { u16 timeout_value; /* 0x02 -0x03 */ u16 routing_flags; // 0x04 -0x05 routing flags u16 virtual_disk_tgt_id; /* 0x06 -0x07 */ - u64 reg_lock_row_lba; /* 0x08 - 0x0F */ + __le64 reg_lock_row_lba; /* 0x08 - 0x0F */ u32 reg_lock_length; /* 0x10 - 0x13 */ - union { - u16 next_lmid; /* 0x14 - 0x15 */ - u16 peer_smid; /* used for the raid 1/10 fp writes */ - } smid; + union { // flow specific + u16 rmw_op_index; /* 0x14 - 0x15, R5/6 RMW: rmw operation index*/ + u16 peer_smid; /* 0x14 - 0x15, R1 Write: peer smid*/ + u16 r56_arm_map; /* 0x14 - 0x15, Unused [15], LogArm[14:10], P-Arm[9:5], Q-Arm[4:0] */ + + } flow_specific; + u8 ex_status; /* 0x16 : OUT */ u8 status; /* 0x17 status */ u8 raid_flags; /* 0x18 resvd[7:6], ioSubType[5:4], @@ -236,6 +239,13 @@ union RAID_CONTEXT_UNION { #define RAID_CTX_SPANARM_SPAN_SHIFT (5) #define RAID_CTX_SPANARM_SPAN_MASK (0xE0) +/* LogArm[14:10], P-Arm[9:5], Q-Arm[4:0] */ +#define RAID_CTX_R56_Q_ARM_MASK (0x1F) +#define RAID_CTX_R56_P_ARM_SHIFT (5) +#define RAID_CTX_R56_P_ARM_MASK (0x3E0) +#define RAID_CTX_R56_LOG_ARM_SHIFT (10) +#define RAID_CTX_R56_LOG_ARM_MASK (0x7C00) + /* number of bits per index in U32 TrackStream */ #define BITS_PER_INDEX_STREAM 4 #define INVALID_STREAM_NUM 16 @@ -940,6 +950,7 @@ struct IO_REQUEST_INFO { u8 pd_after_lb; u16 r1_alt_dev_handle; /* raid 1/10 only */ bool ra_capable; + u8 data_arms; }; struct MR_LD_TARGET_SYNC { @@ -1324,7 +1335,8 @@ struct fusion_context { dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; struct megasas_cmd *ioc_init_cmd; - + bool pcie_bw_limitation; + bool r56_div_offload; }; union desc_value { @@ -1349,6 +1361,11 @@ struct MR_SNAPDUMP_PROPERTIES { u8 reserved[12]; }; +struct megasas_debugfs_buffer { + void *buf; + u32 len; +}; + void megasas_free_cmds_fusion(struct megasas_instance *instance); int megasas_ioc_init_fusion(struct megasas_instance *instance); u8 megasas_get_map_info(struct megasas_instance *instance); diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index a2f4a55c51be..167d79d145ca 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1398,7 +1398,7 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_1 { U8 PCIBusNum; /*0x0E */ U8 PCIDomainSegment; /*0x0F */ U32 Reserved1; /*0x10 */ - U32 Reserved2; /*0x14 */ + U32 ProductSpecific; /* 0x14 */ } MPI2_CONFIG_PAGE_IOC_1, *PTR_MPI2_CONFIG_PAGE_IOC_1, Mpi2IOCPage1_t, *pMpi2IOCPage1_t; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8aacbd1e7db2..684662888792 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -74,28 +74,28 @@ static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; #define MAX_HBA_QUEUE_DEPTH 30000 #define MAX_CHAIN_DEPTH 100000 static int max_queue_depth = -1; -module_param(max_queue_depth, int, 0); +module_param(max_queue_depth, int, 0444); MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); static int max_sgl_entries = -1; -module_param(max_sgl_entries, int, 0); +module_param(max_sgl_entries, int, 0444); MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); static int msix_disable = -1; -module_param(msix_disable, int, 0); +module_param(msix_disable, int, 0444); MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); static int smp_affinity_enable = 1; -module_param(smp_affinity_enable, int, S_IRUGO); +module_param(smp_affinity_enable, int, 0444); MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)"); static int max_msix_vectors = -1; -module_param(max_msix_vectors, int, 0); +module_param(max_msix_vectors, int, 0444); MODULE_PARM_DESC(max_msix_vectors, " max msix vectors"); static int irqpoll_weight = -1; -module_param(irqpoll_weight, int, 0); +module_param(irqpoll_weight, int, 0444); MODULE_PARM_DESC(irqpoll_weight, "irq poll weight (default= one fourth of HBA queue depth)"); @@ -103,6 +103,26 @@ static int mpt3sas_fwfault_debug; MODULE_PARM_DESC(mpt3sas_fwfault_debug, " enable detection of firmware fault and halt firmware - (default=0)"); +static int perf_mode = -1; +module_param(perf_mode, int, 0444); +MODULE_PARM_DESC(perf_mode, + "Performance mode (only for Aero/Sea Generation), options:\n\t\t" + "0 - balanced: high iops mode is enabled &\n\t\t" + "interrupt coalescing is enabled only on high iops queues,\n\t\t" + "1 - iops: high iops mode is disabled &\n\t\t" + "interrupt coalescing is enabled on all queues,\n\t\t" + "2 - latency: high iops mode is disabled &\n\t\t" + "interrupt coalescing is enabled on all queues with timeout value 0xA,\n" + "\t\tdefault - default perf_mode is 'balanced'" + ); + +enum mpt3sas_perf_mode { + MPT_PERF_MODE_DEFAULT = -1, + MPT_PERF_MODE_BALANCED = 0, + MPT_PERF_MODE_IOPS = 1, + MPT_PERF_MODE_LATENCY = 2, +}; + static int _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc); @@ -1282,7 +1302,7 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) ack_request->EventContext = mpi_reply->EventContext; ack_request->VF_ID = 0; /* TODO */ ack_request->VP_ID = 0; - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); out: @@ -2793,6 +2813,9 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + if (ioc->smp_affinity_enable) + irq_set_affinity_hint(pci_irq_vector(ioc->pdev, + reply_q->msix_index), NULL); free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index), reply_q); kfree(reply_q); @@ -2857,14 +2880,13 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) { unsigned int cpu, nr_cpus, nr_msix, index = 0; struct adapter_reply_queue *reply_q; + int local_numa_node; if (!_base_is_controller_msix_enabled(ioc)) return; - ioc->msix_load_balance = false; - if (ioc->reply_queue_count < num_online_cpus()) { - ioc->msix_load_balance = true; + + if (ioc->msix_load_balance) return; - } memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz); @@ -2874,14 +2896,33 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) if (!nr_msix) return; - if (smp_affinity_enable) { + if (ioc->smp_affinity_enable) { + + /* + * set irq affinity to local numa node for those irqs + * corresponding to high iops queues. + */ + if (ioc->high_iops_queues) { + local_numa_node = dev_to_node(&ioc->pdev->dev); + for (index = 0; index < ioc->high_iops_queues; + index++) { + irq_set_affinity_hint(pci_irq_vector(ioc->pdev, + index), cpumask_of_node(local_numa_node)); + } + } + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { - const cpumask_t *mask = pci_irq_get_affinity(ioc->pdev, - reply_q->msix_index); + const cpumask_t *mask; + + if (reply_q->msix_index < ioc->high_iops_queues) + continue; + + mask = pci_irq_get_affinity(ioc->pdev, + reply_q->msix_index); if (!mask) { ioc_warn(ioc, "no affinity for msi %x\n", reply_q->msix_index); - continue; + goto fall_back; } for_each_cpu_and(cpu, mask, cpu_online_mask) { @@ -2892,12 +2933,18 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) } return; } + +fall_back: cpu = cpumask_first(cpu_online_mask); + nr_msix -= ioc->high_iops_queues; + index = 0; list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { - unsigned int i, group = nr_cpus / nr_msix; + if (reply_q->msix_index < ioc->high_iops_queues) + continue; + if (cpu >= nr_cpus) break; @@ -2912,6 +2959,52 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_check_and_enable_high_iops_queues - enable high iops mode + * @ ioc - per adapter object + * @ hba_msix_vector_count - msix vectors supported by HBA + * + * Enable high iops queues only if + * - HBA is a SEA/AERO controller and + * - MSI-Xs vector supported by the HBA is 128 and + * - total CPU count in the system >=16 and + * - loaded driver with default max_msix_vectors module parameter and + * - system booted in non kdump mode + * + * returns nothing. + */ +static void +_base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, + int hba_msix_vector_count) +{ + u16 lnksta, speed; + + if (perf_mode == MPT_PERF_MODE_IOPS || + perf_mode == MPT_PERF_MODE_LATENCY) { + ioc->high_iops_queues = 0; + return; + } + + if (perf_mode == MPT_PERF_MODE_DEFAULT) { + + pcie_capability_read_word(ioc->pdev, PCI_EXP_LNKSTA, &lnksta); + speed = lnksta & PCI_EXP_LNKSTA_CLS; + + if (speed < 0x4) { + ioc->high_iops_queues = 0; + return; + } + } + + if (!reset_devices && ioc->is_aero_ioc && + hba_msix_vector_count == MPT3SAS_GEN35_MAX_MSIX_QUEUES && + num_online_cpus() >= MPT3SAS_HIGH_IOPS_REPLY_QUEUES && + max_msix_vectors == -1) + ioc->high_iops_queues = MPT3SAS_HIGH_IOPS_REPLY_QUEUES; + else + ioc->high_iops_queues = 0; +} + /** * _base_disable_msix - disables msix * @ioc: per adapter object @@ -2922,10 +3015,37 @@ _base_disable_msix(struct MPT3SAS_ADAPTER *ioc) { if (!ioc->msix_enable) return; - pci_disable_msix(ioc->pdev); + pci_free_irq_vectors(ioc->pdev); ioc->msix_enable = 0; } +/** + * _base_alloc_irq_vectors - allocate msix vectors + * @ioc: per adapter object + * + */ +static int +_base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc) +{ + int i, irq_flags = PCI_IRQ_MSIX; + struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues }; + struct irq_affinity *descp = &desc; + + if (ioc->smp_affinity_enable) + irq_flags |= PCI_IRQ_AFFINITY; + else + descp = NULL; + + ioc_info(ioc, " %d %d\n", ioc->high_iops_queues, + ioc->msix_vector_count); + + i = pci_alloc_irq_vectors_affinity(ioc->pdev, + ioc->high_iops_queues, + ioc->msix_vector_count, irq_flags, descp); + + return i; +} + /** * _base_enable_msix - enables msix, failback to io_apic * @ioc: per adapter object @@ -2937,7 +3057,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) int r; int i, local_max_msix_vectors; u8 try_msix = 0; - unsigned int irq_flags = PCI_IRQ_MSIX; + + ioc->msix_load_balance = false; if (msix_disable == -1 || msix_disable == 0) try_msix = 1; @@ -2948,12 +3069,16 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) if (_base_check_enable_msix(ioc) != 0) goto try_ioapic; - ioc->reply_queue_count = min_t(int, ioc->cpu_count, + ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count); + pr_info("\t no of cores: %d, max_msix_vectors: %d\n", + ioc->cpu_count, max_msix_vectors); + if (ioc->is_aero_ioc) + _base_check_and_enable_high_iops_queues(ioc, + ioc->msix_vector_count); + ioc->reply_queue_count = + min_t(int, ioc->cpu_count + ioc->high_iops_queues, ioc->msix_vector_count); - ioc_info(ioc, "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n", - ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors); - if (!ioc->rdpq_array_enable && max_msix_vectors == -1) local_max_msix_vectors = (reset_devices) ? 1 : 8; else @@ -2965,14 +3090,23 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) else if (local_max_msix_vectors == 0) goto try_ioapic; - if (ioc->msix_vector_count < ioc->cpu_count) - smp_affinity_enable = 0; + /* + * Enable msix_load_balance only if combined reply queue mode is + * disabled on SAS3 & above generation HBA devices. + */ + if (!ioc->combined_reply_queue && + ioc->hba_mpi_version_belonged != MPI2_VERSION) { + ioc->msix_load_balance = true; + } - if (smp_affinity_enable) - irq_flags |= PCI_IRQ_AFFINITY; + /* + * smp affinity setting is not need when msix load balance + * is enabled. + */ + if (ioc->msix_load_balance) + ioc->smp_affinity_enable = 0; - r = pci_alloc_irq_vectors(ioc->pdev, 1, ioc->reply_queue_count, - irq_flags); + r = _base_alloc_irq_vectors(ioc); if (r < 0) { dfailprintk(ioc, ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", @@ -2991,11 +3125,15 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) } } + ioc_info(ioc, "High IOPs queues : %s\n", + ioc->high_iops_queues ? "enabled" : "disabled"); + return 0; /* failback to io_apic interrupt routing */ try_ioapic: - + ioc->high_iops_queues = 0; + ioc_info(ioc, "High IOPs queues : disabled\n"); ioc->reply_queue_count = 1; r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY); if (r < 0) { @@ -3265,8 +3403,18 @@ mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) return ioc->reply + (phys_addr - (u32)ioc->reply_dma); } +/** + * _base_get_msix_index - get the msix index + * @ioc: per adapter object + * @scmd: scsi_cmnd object + * + * returns msix index of general reply queues, + * i.e. reply queue on which IO request's reply + * should be posted by the HBA firmware. + */ static inline u8 -_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc) +_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd) { /* Enables reply_queue load balancing */ if (ioc->msix_load_balance) @@ -3277,6 +3425,35 @@ _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc) return ioc->cpu_msix_table[raw_smp_processor_id()]; } +/** + * _base_get_high_iops_msix_index - get the msix index of + * high iops queues + * @ioc: per adapter object + * @scmd: scsi_cmnd object + * + * Returns: msix index of high iops reply queues. + * i.e. high iops reply queue on which IO request's + * reply should be posted by the HBA firmware. + */ +static inline u8 +_base_get_high_iops_msix_index(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd) +{ + /** + * Round robin the IO interrupts among the high iops + * reply queues in terms of batch count 16 when outstanding + * IOs on the target device is >=8. + */ + if (atomic_read(&scmd->device->device_busy) > + MPT3SAS_DEVICE_HIGH_IOPS_DEPTH) + return base_mod64(( + atomic64_add_return(1, &ioc->high_iops_outstanding) / + MPT3SAS_HIGH_IOPS_BATCH_COUNT), + MPT3SAS_HIGH_IOPS_REPLY_QUEUES); + + return _base_get_msix_index(ioc, scmd); +} + /** * mpt3sas_base_get_smid - obtain a free smid from internal queue * @ioc: per adapter object @@ -3325,8 +3502,8 @@ mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, smid = tag + 1; request->cb_idx = cb_idx; - request->msix_io = _base_get_msix_index(ioc); request->smid = smid; + request->scmd = scmd; INIT_LIST_HEAD(&request->chain_list); return smid; } @@ -3380,6 +3557,7 @@ void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc, return; st->cb_idx = 0xFF; st->direct_io = 0; + st->scmd = NULL; atomic_set(&ioc->chain_lookup[st->smid - 1].chain_offset, 0); st->smid = 0; } @@ -3478,6 +3656,29 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) } #endif +/** + * _base_set_and_get_msix_index - get the msix index and assign to msix_io + * variable of scsi tracker + * @ioc: per adapter object + * @smid: system request message index + * + * returns msix index. + */ +static u8 +_base_set_and_get_msix_index(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + struct scsiio_tracker *st = NULL; + + if (smid < ioc->hi_priority_smid) + st = _get_st_from_smid(ioc, smid); + + if (st == NULL) + return _base_get_msix_index(ioc, NULL); + + st->msix_io = ioc->get_msix_index_for_smlio(ioc, st->scmd); + return st->msix_io; +} + /** * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware * @ioc: per adapter object @@ -3485,7 +3686,8 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) * @handle: device handle */ static void -_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) +_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, + u16 smid, u16 handle) { Mpi2RequestDescriptorUnion_t descriptor; u64 *request = (u64 *)&descriptor; @@ -3498,7 +3700,7 @@ _base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp, ioc->request_sz); descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; - descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); descriptor.SCSIIO.SMID = cpu_to_le16(smid); descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); descriptor.SCSIIO.LMID = 0; @@ -3520,7 +3722,7 @@ _base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; - descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); descriptor.SCSIIO.SMID = cpu_to_le16(smid); descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); descriptor.SCSIIO.LMID = 0; @@ -3529,13 +3731,13 @@ _base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) } /** - * mpt3sas_base_put_smid_fast_path - send fast path request to firmware + * _base_put_smid_fast_path - send fast path request to firmware * @ioc: per adapter object * @smid: system request message index * @handle: device handle */ -void -mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, +static void +_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) { Mpi2RequestDescriptorUnion_t descriptor; @@ -3543,7 +3745,7 @@ mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, descriptor.SCSIIO.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; - descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); descriptor.SCSIIO.SMID = cpu_to_le16(smid); descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); descriptor.SCSIIO.LMID = 0; @@ -3552,13 +3754,13 @@ mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, } /** - * mpt3sas_base_put_smid_hi_priority - send Task Management request to firmware + * _base_put_smid_hi_priority - send Task Management request to firmware * @ioc: per adapter object * @smid: system request message index * @msix_task: msix_task will be same as msix of IO incase of task abort else 0. */ -void -mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid, +static void +_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 msix_task) { Mpi2RequestDescriptorUnion_t descriptor; @@ -3607,7 +3809,7 @@ mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid) descriptor.Default.RequestFlags = MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED; - descriptor.Default.MSIxIndex = _base_get_msix_index(ioc); + descriptor.Default.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); descriptor.Default.SMID = cpu_to_le16(smid); descriptor.Default.LMID = 0; descriptor.Default.DescriptorTypeDependent = 0; @@ -3616,12 +3818,12 @@ mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid) } /** - * mpt3sas_base_put_smid_default - Default, primarily used for config pages + * _base_put_smid_default - Default, primarily used for config pages * @ioc: per adapter object * @smid: system request message index */ -void -mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) +static void +_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) { Mpi2RequestDescriptorUnion_t descriptor; void *mpi_req_iomem; @@ -3639,7 +3841,7 @@ mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) } request = (u64 *)&descriptor; descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; - descriptor.Default.MSIxIndex = _base_get_msix_index(ioc); + descriptor.Default.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); descriptor.Default.SMID = cpu_to_le16(smid); descriptor.Default.LMID = 0; descriptor.Default.DescriptorTypeDependent = 0; @@ -3652,6 +3854,95 @@ mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) &ioc->scsi_lookup_lock); } +/** + * _base_put_smid_scsi_io_atomic - send SCSI_IO request to firmware using + * Atomic Request Descriptor + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle, unused in this function, for function type match + * + * Return nothing. + */ +static void +_base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle) +{ + Mpi26AtomicRequestDescriptor_t descriptor; + u32 *request = (u32 *)&descriptor; + + descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); + descriptor.SMID = cpu_to_le16(smid); + + writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); +} + +/** + * _base_put_smid_fast_path_atomic - send fast path request to firmware + * using Atomic Request Descriptor + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle, unused in this function, for function type match + * Return nothing + */ +static void +_base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle) +{ + Mpi26AtomicRequestDescriptor_t descriptor; + u32 *request = (u32 *)&descriptor; + + descriptor.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; + descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); + descriptor.SMID = cpu_to_le16(smid); + + writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); +} + +/** + * _base_put_smid_hi_priority_atomic - send Task Management request to + * firmware using Atomic Request Descriptor + * @ioc: per adapter object + * @smid: system request message index + * @msix_task: msix_task will be same as msix of IO incase of task abort else 0 + * + * Return nothing. + */ +static void +_base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 msix_task) +{ + Mpi26AtomicRequestDescriptor_t descriptor; + u32 *request = (u32 *)&descriptor; + + descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.MSIxIndex = msix_task; + descriptor.SMID = cpu_to_le16(smid); + + writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); +} + +/** + * _base_put_smid_default - Default, primarily used for config pages + * use Atomic Request Descriptor + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +static void +_base_put_smid_default_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + Mpi26AtomicRequestDescriptor_t descriptor; + u32 *request = (u32 *)&descriptor; + + descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); + descriptor.SMID = cpu_to_le16(smid); + + writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); +} + /** * _base_display_OEMs_branding - Display branding string * @ioc: per adapter object @@ -3952,7 +4243,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) ioc->build_sg(ioc, &mpi_request->SGL, 0, 0, fwpkg_data_dma, data_length); init_completion(&ioc->base_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); /* Wait for 15 seconds */ wait_for_completion_timeout(&ioc->base_cmds.done, FW_IMG_HDR_READ_TIMEOUT*HZ); @@ -4191,6 +4482,71 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, kfree(sas_iounit_pg1); } +/** + * _base_update_ioc_page1_inlinewith_perf_mode - Update IOC Page1 fields + * according to performance mode. + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2IOCPage1_t ioc_pg1; + Mpi2ConfigReply_t mpi_reply; + + mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy); + memcpy(&ioc_pg1, &ioc->ioc_pg1_copy, sizeof(Mpi2IOCPage1_t)); + + switch (perf_mode) { + case MPT_PERF_MODE_DEFAULT: + case MPT_PERF_MODE_BALANCED: + if (ioc->high_iops_queues) { + ioc_info(ioc, + "Enable interrupt coalescing only for first\t" + "%d reply queues\n", + MPT3SAS_HIGH_IOPS_REPLY_QUEUES); + /* + * If 31st bit is zero then interrupt coalescing is + * enabled for all reply descriptor post queues. + * If 31st bit is set to one then user can + * enable/disable interrupt coalescing on per reply + * descriptor post queue group(8) basis. So to enable + * interrupt coalescing only on first reply descriptor + * post queue group 31st bit and zero th bit is enabled. + */ + ioc_pg1.ProductSpecific = cpu_to_le32(0x80000000 | + ((1 << MPT3SAS_HIGH_IOPS_REPLY_QUEUES/8) - 1)); + mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + ioc_info(ioc, "performance mode: balanced\n"); + return; + } + /* Fall through */ + case MPT_PERF_MODE_LATENCY: + /* + * Enable interrupt coalescing on all reply queues + * with timeout value 0xA + */ + ioc_pg1.CoalescingTimeout = cpu_to_le32(0xa); + ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); + ioc_pg1.ProductSpecific = 0; + mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + ioc_info(ioc, "performance mode: latency\n"); + break; + case MPT_PERF_MODE_IOPS: + /* + * Enable interrupt coalescing on all reply queues. + */ + ioc_info(ioc, + "performance mode: iops with coalescing timeout: 0x%x\n", + le32_to_cpu(ioc_pg1.CoalescingTimeout)); + ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); + ioc_pg1.ProductSpecific = 0; + mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + break; + } +} + /** * _base_static_config_pages - static start of day config pages * @ioc: per adapter object @@ -4258,6 +4614,8 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) if (ioc->iounit_pg8.NumSensors) ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; + if (ioc->is_aero_ioc) + _base_update_ioc_page1_inlinewith_perf_mode(ioc); } /** @@ -5431,7 +5789,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) ioc->ioc_link_reset_in_progress = 1; init_completion(&ioc->base_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->base_cmds.done, msecs_to_jiffies(10000)); if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || @@ -5510,7 +5868,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, ioc->base_cmds.smid = smid; memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); init_completion(&ioc->base_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->base_cmds.done, msecs_to_jiffies(10000)); if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { @@ -5693,6 +6051,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc) if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices)) ioc->rdpq_array_capable = 1; + if ((facts->IOCCapabilities & MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ) + && ioc->is_aero_ioc) + ioc->atomic_desc_capable = 1; facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); facts->IOCRequestFrameSize = le16_to_cpu(mpi_reply.IOCRequestFrameSize); @@ -5914,7 +6275,7 @@ _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc) mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; init_completion(&ioc->port_enable_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ); if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) { ioc_err(ioc, "%s: timeout\n", __func__); @@ -5973,7 +6334,7 @@ mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); return 0; } @@ -6089,7 +6450,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc) mpi_request->EventMasks[i] = cpu_to_le32(ioc->event_masks[i]); init_completion(&ioc->base_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { ioc_err(ioc, "%s: timeout\n", __func__); @@ -6549,6 +6910,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) } } + ioc->smp_affinity_enable = smp_affinity_enable; + ioc->rdpq_array_enable_assigned = 0; ioc->dma_mask = 0; if (ioc->is_aero_ioc) @@ -6569,6 +6932,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->build_sg_scmd = &_base_build_sg_scmd; ioc->build_sg = &_base_build_sg; ioc->build_zero_len_sge = &_base_build_zero_len_sge; + ioc->get_msix_index_for_smlio = &_base_get_msix_index; break; case MPI25_VERSION: case MPI26_VERSION: @@ -6583,15 +6947,30 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->build_nvme_prp = &_base_build_nvme_prp; ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); - + if (ioc->high_iops_queues) + ioc->get_msix_index_for_smlio = + &_base_get_high_iops_msix_index; + else + ioc->get_msix_index_for_smlio = &_base_get_msix_index; break; } - - if (ioc->is_mcpu_endpoint) - ioc->put_smid_scsi_io = &_base_put_smid_mpi_ep_scsi_io; - else - ioc->put_smid_scsi_io = &_base_put_smid_scsi_io; - + if (ioc->atomic_desc_capable) { + ioc->put_smid_default = &_base_put_smid_default_atomic; + ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic; + ioc->put_smid_fast_path = + &_base_put_smid_fast_path_atomic; + ioc->put_smid_hi_priority = + &_base_put_smid_hi_priority_atomic; + } else { + ioc->put_smid_default = &_base_put_smid_default; + ioc->put_smid_fast_path = &_base_put_smid_fast_path; + ioc->put_smid_hi_priority = &_base_put_smid_hi_priority; + if (ioc->is_mcpu_endpoint) + ioc->put_smid_scsi_io = + &_base_put_smid_mpi_ep_scsi_io; + else + ioc->put_smid_scsi_io = &_base_put_smid_scsi_io; + } /* * These function pointers for other requests that don't * the require IEEE scatter gather elements. diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 480219f0efc5..6afbdb044310 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -76,8 +76,8 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies " #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "28.100.00.00" -#define MPT3SAS_MAJOR_VERSION 28 +#define MPT3SAS_DRIVER_VERSION "29.100.00.00" +#define MPT3SAS_MAJOR_VERSION 29 #define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 @@ -355,6 +355,12 @@ struct mpt3sas_nvme_cmd { #define VIRTUAL_IO_FAILED_RETRY (0x32010081) +/* High IOPs definitions */ +#define MPT3SAS_DEVICE_HIGH_IOPS_DEPTH 8 +#define MPT3SAS_HIGH_IOPS_REPLY_QUEUES 8 +#define MPT3SAS_HIGH_IOPS_BATCH_COUNT 16 +#define MPT3SAS_GEN35_MAX_MSIX_QUEUES 128 + /* OEM Specific Flags will come from OEM specific header files */ struct Mpi2ManufacturingPage10_t { MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ @@ -824,6 +830,7 @@ struct chain_lookup { */ struct scsiio_tracker { u16 smid; + struct scsi_cmnd *scmd; u8 cb_idx; u8 direct_io; struct pcie_sg_list pcie_sg_list; @@ -924,6 +931,12 @@ typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 funcdep); typedef void (*PUT_SMID_DEFAULT) (struct MPT3SAS_ADAPTER *ioc, u16 smid); typedef u32 (*BASE_READ_REG) (const volatile void __iomem *addr); +/* + * To get high iops reply queue's msix index when high iops mode is enabled + * else get the msix index of general reply queues. + */ +typedef u8 (*GET_MSIX_INDEX) (struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd); /* IOC Facts and Port Facts converted from little endian to cpu */ union mpi3_version_union { @@ -1025,6 +1038,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @cpu_msix_table: table for mapping cpus to msix index * @cpu_msix_table_sz: table size * @total_io_cnt: Gives total IO count, used to load balance the interrupts + * @high_iops_outstanding: used to load balance the interrupts + * within high iops reply queues * @msix_load_balance: Enables load balancing of interrupts across * the multiple MSIXs * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands @@ -1147,6 +1162,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * path functions resulting in Null pointer reference followed by kernel * crash. To avoid the above race condition we use mutex syncrhonization * which ensures the syncrhonization between cli/sysfs_show path. + * @atomic_desc_capable: Atomic Request Descriptor support. + * @GET_MSIX_INDEX: Get the msix index of high iops queues. */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -1206,8 +1223,10 @@ struct MPT3SAS_ADAPTER { MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; u32 non_operational_loop; atomic64_t total_io_cnt; + atomic64_t high_iops_outstanding; bool msix_load_balance; u16 thresh_hold; + u8 high_iops_queues; /* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -1267,6 +1286,7 @@ struct MPT3SAS_ADAPTER { Mpi2IOUnitPage0_t iounit_pg0; Mpi2IOUnitPage1_t iounit_pg1; Mpi2IOUnitPage8_t iounit_pg8; + Mpi2IOCPage1_t ioc_pg1_copy; struct _boot_device req_boot_device; struct _boot_device req_alt_boot_device; @@ -1385,6 +1405,7 @@ struct MPT3SAS_ADAPTER { u8 combined_reply_queue; u8 combined_reply_index_count; + u8 smp_affinity_enable; /* reply post register index */ resource_size_t **replyPostRegisterIndex; @@ -1412,6 +1433,7 @@ struct MPT3SAS_ADAPTER { u8 hide_drives; spinlock_t diag_trigger_lock; u8 diag_trigger_active; + u8 atomic_desc_capable; BASE_READ_REG base_readl; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; @@ -1422,7 +1444,10 @@ struct MPT3SAS_ADAPTER { u8 is_gen35_ioc; u8 is_aero_ioc; PUT_SMID_IO_FP_HIP put_smid_scsi_io; - + PUT_SMID_IO_FP_HIP put_smid_fast_path; + PUT_SMID_IO_FP_HIP put_smid_hi_priority; + PUT_SMID_DEFAULT put_smid_default; + GET_MSIX_INDEX get_msix_index_for_smlio; }; typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, @@ -1611,6 +1636,10 @@ int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage1_t *config_page); +int mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage1_t *config_page); int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page); int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index fb0a17252f86..14a1a2793dd5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -380,7 +380,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); _config_display_some_debug(ioc, smid, "config_request", NULL); init_completion(&ioc->config_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ); if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) { mpt3sas_base_check_cmd_timeout(ioc, @@ -949,6 +949,77 @@ mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, out: return r; } +/** + * mpt3sas_config_get_ioc_pg1 - obtain ioc page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Return: 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_ioc_pg1 - modify ioc page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Return: 0 for success, non-zero for failure. + */ +int +mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} /** * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0 diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index b2bb47c14d35..d4ecfbbe738c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -822,7 +822,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) ioc->put_smid_scsi_io(ioc, smid, device_handle); else - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_SCSI_TASK_MGMT: @@ -859,7 +859,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, tm_request->DevHandle)); ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - mpt3sas_base_put_smid_hi_priority(ioc, smid, 0); + ioc->put_smid_hi_priority(ioc, smid, 0); break; } case MPI2_FUNCTION_SMP_PASSTHROUGH: @@ -890,7 +890,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, } ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_SATA_PASSTHROUGH: @@ -905,7 +905,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, } ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_FW_DOWNLOAD: @@ -913,7 +913,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, { ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_TOOLBOX: @@ -928,7 +928,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); } - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: @@ -948,7 +948,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, default: ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); break; } @@ -1576,7 +1576,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc, cpu_to_le32(ioc->product_specific[buffer_type][i]); init_completion(&ioc->ctl_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->ctl_cmds.done, MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); @@ -1903,7 +1903,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, mpi_request->VP_ID = 0; init_completion(&ioc->ctl_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->ctl_cmds.done, MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); @@ -2151,7 +2151,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg) mpi_request->VP_ID = 0; init_completion(&ioc->ctl_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->ctl_cmds.done, MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); @@ -2319,6 +2319,10 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, break; } + if (karg.hdr.ioc_number != ioctl_header.ioc_number) { + ret = -EINVAL; + break; + } if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) { uarg = arg; ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf); @@ -2453,7 +2457,7 @@ _ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) /* scsi host attributes */ /** - * _ctl_version_fw_show - firmware version + * version_fw_show - firmware version * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2461,7 +2465,7 @@ _ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, +version_fw_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2473,10 +2477,10 @@ _ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, ioc->facts.FWVersion.Word & 0x000000FF); } -static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); +static DEVICE_ATTR_RO(version_fw); /** - * _ctl_version_bios_show - bios version + * version_bios_show - bios version * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2484,7 +2488,7 @@ static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, +version_bios_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2498,10 +2502,10 @@ _ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, (version & 0x0000FF00) >> 8, version & 0x000000FF); } -static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); +static DEVICE_ATTR_RO(version_bios); /** - * _ctl_version_mpi_show - MPI (message passing interface) version + * version_mpi_show - MPI (message passing interface) version * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2509,7 +2513,7 @@ static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, +version_mpi_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2518,10 +2522,10 @@ _ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%03x.%02x\n", ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8); } -static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); +static DEVICE_ATTR_RO(version_mpi); /** - * _ctl_version_product_show - product name + * version_product_show - product name * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2529,7 +2533,7 @@ static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_product_show(struct device *cdev, struct device_attribute *attr, +version_product_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2537,10 +2541,10 @@ _ctl_version_product_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName); } -static DEVICE_ATTR(version_product, S_IRUGO, _ctl_version_product_show, NULL); +static DEVICE_ATTR_RO(version_product); /** - * _ctl_version_nvdata_persistent_show - ndvata persistent version + * version_nvdata_persistent_show - ndvata persistent version * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2548,7 +2552,7 @@ static DEVICE_ATTR(version_product, S_IRUGO, _ctl_version_product_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_nvdata_persistent_show(struct device *cdev, +version_nvdata_persistent_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2557,11 +2561,10 @@ _ctl_version_nvdata_persistent_show(struct device *cdev, return snprintf(buf, PAGE_SIZE, "%08xh\n", le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); } -static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, - _ctl_version_nvdata_persistent_show, NULL); +static DEVICE_ATTR_RO(version_nvdata_persistent); /** - * _ctl_version_nvdata_default_show - nvdata default version + * version_nvdata_default_show - nvdata default version * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2569,7 +2572,7 @@ static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_version_nvdata_default_show(struct device *cdev, struct device_attribute +version_nvdata_default_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2578,11 +2581,10 @@ _ctl_version_nvdata_default_show(struct device *cdev, struct device_attribute return snprintf(buf, PAGE_SIZE, "%08xh\n", le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); } -static DEVICE_ATTR(version_nvdata_default, S_IRUGO, - _ctl_version_nvdata_default_show, NULL); +static DEVICE_ATTR_RO(version_nvdata_default); /** - * _ctl_board_name_show - board name + * board_name_show - board name * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2590,7 +2592,7 @@ static DEVICE_ATTR(version_nvdata_default, S_IRUGO, * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_board_name_show(struct device *cdev, struct device_attribute *attr, +board_name_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2598,10 +2600,10 @@ _ctl_board_name_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName); } -static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); +static DEVICE_ATTR_RO(board_name); /** - * _ctl_board_assembly_show - board assembly name + * board_assembly_show - board assembly name * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2609,7 +2611,7 @@ static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, +board_assembly_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2617,10 +2619,10 @@ _ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly); } -static DEVICE_ATTR(board_assembly, S_IRUGO, _ctl_board_assembly_show, NULL); +static DEVICE_ATTR_RO(board_assembly); /** - * _ctl_board_tracer_show - board tracer number + * board_tracer_show - board tracer number * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2628,7 +2630,7 @@ static DEVICE_ATTR(board_assembly, S_IRUGO, _ctl_board_assembly_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, +board_tracer_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2636,10 +2638,10 @@ _ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber); } -static DEVICE_ATTR(board_tracer, S_IRUGO, _ctl_board_tracer_show, NULL); +static DEVICE_ATTR_RO(board_tracer); /** - * _ctl_io_delay_show - io missing delay + * io_delay_show - io missing delay * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2650,7 +2652,7 @@ static DEVICE_ATTR(board_tracer, S_IRUGO, _ctl_board_tracer_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, +io_delay_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2658,10 +2660,10 @@ _ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); } -static DEVICE_ATTR(io_delay, S_IRUGO, _ctl_io_delay_show, NULL); +static DEVICE_ATTR_RO(io_delay); /** - * _ctl_device_delay_show - device missing delay + * device_delay_show - device missing delay * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2672,7 +2674,7 @@ static DEVICE_ATTR(io_delay, S_IRUGO, _ctl_io_delay_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, +device_delay_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2680,10 +2682,10 @@ _ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); } -static DEVICE_ATTR(device_delay, S_IRUGO, _ctl_device_delay_show, NULL); +static DEVICE_ATTR_RO(device_delay); /** - * _ctl_fw_queue_depth_show - global credits + * fw_queue_depth_show - global credits * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2693,7 +2695,7 @@ static DEVICE_ATTR(device_delay, S_IRUGO, _ctl_device_delay_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, +fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2701,10 +2703,10 @@ _ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit); } -static DEVICE_ATTR(fw_queue_depth, S_IRUGO, _ctl_fw_queue_depth_show, NULL); +static DEVICE_ATTR_RO(fw_queue_depth); /** - * _ctl_sas_address_show - sas address + * sas_address_show - sas address * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2714,7 +2716,7 @@ static DEVICE_ATTR(fw_queue_depth, S_IRUGO, _ctl_fw_queue_depth_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, +host_sas_address_show(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -2724,11 +2726,10 @@ _ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "0x%016llx\n", (unsigned long long)ioc->sas_hba.sas_address); } -static DEVICE_ATTR(host_sas_address, S_IRUGO, - _ctl_host_sas_address_show, NULL); +static DEVICE_ATTR_RO(host_sas_address); /** - * _ctl_logging_level_show - logging level + * logging_level_show - logging level * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2736,7 +2737,7 @@ static DEVICE_ATTR(host_sas_address, S_IRUGO, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, +logging_level_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2745,7 +2746,7 @@ _ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level); } static ssize_t -_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, +logging_level_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2760,11 +2761,10 @@ _ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, ioc->logging_level); return strlen(buf); } -static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, _ctl_logging_level_show, - _ctl_logging_level_store); +static DEVICE_ATTR_RW(logging_level); /** - * _ctl_fwfault_debug_show - show/store fwfault_debug + * fwfault_debug_show - show/store fwfault_debug * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2773,7 +2773,7 @@ static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, _ctl_logging_level_show, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_fwfault_debug_show(struct device *cdev, struct device_attribute *attr, +fwfault_debug_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2782,7 +2782,7 @@ _ctl_fwfault_debug_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug); } static ssize_t -_ctl_fwfault_debug_store(struct device *cdev, struct device_attribute *attr, +fwfault_debug_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2797,11 +2797,10 @@ _ctl_fwfault_debug_store(struct device *cdev, struct device_attribute *attr, ioc->fwfault_debug); return strlen(buf); } -static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR, - _ctl_fwfault_debug_show, _ctl_fwfault_debug_store); +static DEVICE_ATTR_RW(fwfault_debug); /** - * _ctl_ioc_reset_count_show - ioc reset count + * ioc_reset_count_show - ioc reset count * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2811,7 +2810,7 @@ static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR, * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr, +ioc_reset_count_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2819,10 +2818,10 @@ _ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count); } -static DEVICE_ATTR(ioc_reset_count, S_IRUGO, _ctl_ioc_reset_count_show, NULL); +static DEVICE_ATTR_RO(ioc_reset_count); /** - * _ctl_ioc_reply_queue_count_show - number of reply queues + * reply_queue_count_show - number of reply queues * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2832,7 +2831,7 @@ static DEVICE_ATTR(ioc_reset_count, S_IRUGO, _ctl_ioc_reset_count_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_ioc_reply_queue_count_show(struct device *cdev, +reply_queue_count_show(struct device *cdev, struct device_attribute *attr, char *buf) { u8 reply_queue_count; @@ -2847,11 +2846,10 @@ _ctl_ioc_reply_queue_count_show(struct device *cdev, return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count); } -static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show, - NULL); +static DEVICE_ATTR_RO(reply_queue_count); /** - * _ctl_BRM_status_show - Backup Rail Monitor Status + * BRM_status_show - Backup Rail Monitor Status * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2861,7 +2859,7 @@ static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show, * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr, +BRM_status_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2923,7 +2921,7 @@ _ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr, mutex_unlock(&ioc->pci_access_mutex); return rc; } -static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL); +static DEVICE_ATTR_RO(BRM_status); struct DIAG_BUFFER_START { __le32 Size; @@ -2936,7 +2934,7 @@ struct DIAG_BUFFER_START { }; /** - * _ctl_host_trace_buffer_size_show - host buffer size (trace only) + * host_trace_buffer_size_show - host buffer size (trace only) * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2944,7 +2942,7 @@ struct DIAG_BUFFER_START { * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_host_trace_buffer_size_show(struct device *cdev, +host_trace_buffer_size_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -2976,11 +2974,10 @@ _ctl_host_trace_buffer_size_show(struct device *cdev, ioc->ring_buffer_sz = size; return snprintf(buf, PAGE_SIZE, "%d\n", size); } -static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO, - _ctl_host_trace_buffer_size_show, NULL); +static DEVICE_ATTR_RO(host_trace_buffer_size); /** - * _ctl_host_trace_buffer_show - firmware ring buffer (trace only) + * host_trace_buffer_show - firmware ring buffer (trace only) * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -2992,7 +2989,7 @@ static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO, * offset to the same attribute, it will move the pointer. */ static ssize_t -_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr, +host_trace_buffer_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3024,7 +3021,7 @@ _ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr, } static ssize_t -_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr, +host_trace_buffer_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3037,14 +3034,13 @@ _ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr, ioc->ring_buffer_offset = val; return strlen(buf); } -static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR, - _ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store); +static DEVICE_ATTR_RW(host_trace_buffer); /*****************************************/ /** - * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only) + * host_trace_buffer_enable_show - firmware ring buffer (trace only) * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3054,7 +3050,7 @@ static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR, * This is a mechnism to post/release host_trace_buffers */ static ssize_t -_ctl_host_trace_buffer_enable_show(struct device *cdev, +host_trace_buffer_enable_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3072,7 +3068,7 @@ _ctl_host_trace_buffer_enable_show(struct device *cdev, } static ssize_t -_ctl_host_trace_buffer_enable_store(struct device *cdev, +host_trace_buffer_enable_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3122,14 +3118,12 @@ _ctl_host_trace_buffer_enable_store(struct device *cdev, out: return strlen(buf); } -static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR, - _ctl_host_trace_buffer_enable_show, - _ctl_host_trace_buffer_enable_store); +static DEVICE_ATTR_RW(host_trace_buffer_enable); /*********** diagnostic trigger suppport *********************************/ /** - * _ctl_diag_trigger_master_show - show the diag_trigger_master attribute + * diag_trigger_master_show - show the diag_trigger_master attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3137,7 +3131,7 @@ static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_master_show(struct device *cdev, +diag_trigger_master_show(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -3154,7 +3148,7 @@ _ctl_diag_trigger_master_show(struct device *cdev, } /** - * _ctl_diag_trigger_master_store - store the diag_trigger_master attribute + * diag_trigger_master_store - store the diag_trigger_master attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3163,7 +3157,7 @@ _ctl_diag_trigger_master_show(struct device *cdev, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_master_store(struct device *cdev, +diag_trigger_master_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { @@ -3182,12 +3176,11 @@ _ctl_diag_trigger_master_store(struct device *cdev, spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); return rc; } -static DEVICE_ATTR(diag_trigger_master, S_IRUGO | S_IWUSR, - _ctl_diag_trigger_master_show, _ctl_diag_trigger_master_store); +static DEVICE_ATTR_RW(diag_trigger_master); /** - * _ctl_diag_trigger_event_show - show the diag_trigger_event attribute + * diag_trigger_event_show - show the diag_trigger_event attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3195,7 +3188,7 @@ static DEVICE_ATTR(diag_trigger_master, S_IRUGO | S_IWUSR, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_event_show(struct device *cdev, +diag_trigger_event_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3211,7 +3204,7 @@ _ctl_diag_trigger_event_show(struct device *cdev, } /** - * _ctl_diag_trigger_event_store - store the diag_trigger_event attribute + * diag_trigger_event_store - store the diag_trigger_event attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3220,7 +3213,7 @@ _ctl_diag_trigger_event_show(struct device *cdev, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_event_store(struct device *cdev, +diag_trigger_event_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { @@ -3239,12 +3232,11 @@ _ctl_diag_trigger_event_store(struct device *cdev, spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); return sz; } -static DEVICE_ATTR(diag_trigger_event, S_IRUGO | S_IWUSR, - _ctl_diag_trigger_event_show, _ctl_diag_trigger_event_store); +static DEVICE_ATTR_RW(diag_trigger_event); /** - * _ctl_diag_trigger_scsi_show - show the diag_trigger_scsi attribute + * diag_trigger_scsi_show - show the diag_trigger_scsi attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3252,7 +3244,7 @@ static DEVICE_ATTR(diag_trigger_event, S_IRUGO | S_IWUSR, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_scsi_show(struct device *cdev, +diag_trigger_scsi_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3268,7 +3260,7 @@ _ctl_diag_trigger_scsi_show(struct device *cdev, } /** - * _ctl_diag_trigger_scsi_store - store the diag_trigger_scsi attribute + * diag_trigger_scsi_store - store the diag_trigger_scsi attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3277,7 +3269,7 @@ _ctl_diag_trigger_scsi_show(struct device *cdev, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_scsi_store(struct device *cdev, +diag_trigger_scsi_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3295,12 +3287,11 @@ _ctl_diag_trigger_scsi_store(struct device *cdev, spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); return sz; } -static DEVICE_ATTR(diag_trigger_scsi, S_IRUGO | S_IWUSR, - _ctl_diag_trigger_scsi_show, _ctl_diag_trigger_scsi_store); +static DEVICE_ATTR_RW(diag_trigger_scsi); /** - * _ctl_diag_trigger_scsi_show - show the diag_trigger_mpi attribute + * diag_trigger_scsi_show - show the diag_trigger_mpi attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3308,7 +3299,7 @@ static DEVICE_ATTR(diag_trigger_scsi, S_IRUGO | S_IWUSR, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_mpi_show(struct device *cdev, +diag_trigger_mpi_show(struct device *cdev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3324,7 +3315,7 @@ _ctl_diag_trigger_mpi_show(struct device *cdev, } /** - * _ctl_diag_trigger_mpi_store - store the diag_trigger_mpi attribute + * diag_trigger_mpi_store - store the diag_trigger_mpi attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3333,7 +3324,7 @@ _ctl_diag_trigger_mpi_show(struct device *cdev, * A sysfs 'read/write' shost attribute. */ static ssize_t -_ctl_diag_trigger_mpi_store(struct device *cdev, +diag_trigger_mpi_store(struct device *cdev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(cdev); @@ -3352,8 +3343,7 @@ _ctl_diag_trigger_mpi_store(struct device *cdev, return sz; } -static DEVICE_ATTR(diag_trigger_mpi, S_IRUGO | S_IWUSR, - _ctl_diag_trigger_mpi_show, _ctl_diag_trigger_mpi_store); +static DEVICE_ATTR_RW(diag_trigger_mpi); /*********** diagnostic trigger suppport *** END ****************************/ @@ -3391,7 +3381,7 @@ struct device_attribute *mpt3sas_host_attrs[] = { /* device attributes */ /** - * _ctl_device_sas_address_show - sas address + * sas_address_show - sas address * @dev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3401,7 +3391,7 @@ struct device_attribute *mpt3sas_host_attrs[] = { * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, +sas_address_show(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); @@ -3410,10 +3400,10 @@ _ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "0x%016llx\n", (unsigned long long)sas_device_priv_data->sas_target->sas_address); } -static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); +static DEVICE_ATTR_RO(sas_address); /** - * _ctl_device_handle_show - device handle + * sas_device_handle_show - device handle * @dev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3423,7 +3413,7 @@ static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); * A sysfs 'read-only' shost attribute. */ static ssize_t -_ctl_device_handle_show(struct device *dev, struct device_attribute *attr, +sas_device_handle_show(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); @@ -3432,10 +3422,10 @@ _ctl_device_handle_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "0x%04x\n", sas_device_priv_data->sas_target->handle); } -static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); +static DEVICE_ATTR_RO(sas_device_handle); /** - * _ctl_device_ncq_io_prio_show - send prioritized io commands to device + * sas_ncq_io_prio_show - send prioritized io commands to device * @dev: pointer to embedded device * @attr: ? * @buf: the buffer returned @@ -3443,7 +3433,7 @@ static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); * A sysfs 'read/write' sdev attribute, only works with SATA */ static ssize_t -_ctl_device_ncq_prio_enable_show(struct device *dev, +sas_ncq_prio_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); @@ -3454,7 +3444,7 @@ _ctl_device_ncq_prio_enable_show(struct device *dev, } static ssize_t -_ctl_device_ncq_prio_enable_store(struct device *dev, +sas_ncq_prio_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -3471,9 +3461,7 @@ _ctl_device_ncq_prio_enable_store(struct device *dev, sas_device_priv_data->ncq_prio_enable = ncq_prio_enable; return strlen(buf); } -static DEVICE_ATTR(sas_ncq_prio_enable, S_IRUGO | S_IWUSR, - _ctl_device_ncq_prio_enable_show, - _ctl_device_ncq_prio_enable_store); +static DEVICE_ATTR_RW(sas_ncq_prio_enable); struct device_attribute *mpt3sas_dev_attrs[] = { &dev_attr_sas_address, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 1ccfbc7eebe0..27c731a3fb49 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -113,22 +113,22 @@ MODULE_PARM_DESC(logging_level, static ushort max_sectors = 0xFFFF; -module_param(max_sectors, ushort, 0); +module_param(max_sectors, ushort, 0444); MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767 default=32767"); static int missing_delay[2] = {-1, -1}; -module_param_array(missing_delay, int, NULL, 0); +module_param_array(missing_delay, int, NULL, 0444); MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay"); /* scsi-mid layer global parmeter is max_report_luns, which is 511 */ #define MPT3SAS_MAX_LUN (16895) static u64 max_lun = MPT3SAS_MAX_LUN; -module_param(max_lun, ullong, 0); +module_param(max_lun, ullong, 0444); MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); static ushort hbas_to_enumerate; -module_param(hbas_to_enumerate, ushort, 0); +module_param(hbas_to_enumerate, ushort, 0444); MODULE_PARM_DESC(hbas_to_enumerate, " 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \ 1 - enumerates only SAS 2.0 generation HBAs\n \ @@ -142,17 +142,17 @@ MODULE_PARM_DESC(hbas_to_enumerate, * Either bit can be set, or both */ static int diag_buffer_enable = -1; -module_param(diag_buffer_enable, int, 0); +module_param(diag_buffer_enable, int, 0444); MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); static int disable_discovery = -1; -module_param(disable_discovery, int, 0); +module_param(disable_discovery, int, 0444); MODULE_PARM_DESC(disable_discovery, " disable discovery "); /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */ static int prot_mask = -1; -module_param(prot_mask, int, 0); +module_param(prot_mask, int, 0444); MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 "); @@ -2685,7 +2685,7 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, u64 lun, int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); mpt3sas_scsih_set_tm_flag(ioc, handle); init_completion(&ioc->tm_cmds.done); - mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task); + ioc->put_smid_hi_priority(ioc, smid, msix_task); wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) { if (mpt3sas_base_check_cmd_timeout(ioc, @@ -3659,7 +3659,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; mpi_request->MsgFlags = tr_method; set_bit(handle, ioc->device_remove_in_progress); - mpt3sas_base_put_smid_hi_priority(ioc, smid, 0); + ioc->put_smid_hi_priority(ioc, smid, 0); mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL); out: @@ -3755,7 +3755,7 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; mpi_request->DevHandle = mpi_request_tm->DevHandle; - mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl); + ioc->put_smid_default(ioc, smid_sas_ctrl); return _scsih_check_for_pending_tm(ioc, smid); } @@ -3881,7 +3881,7 @@ _scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; - mpt3sas_base_put_smid_hi_priority(ioc, smid, 0); + ioc->put_smid_hi_priority(ioc, smid, 0); } /** @@ -3970,7 +3970,7 @@ _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, U16 event, ack_request->EventContext = event_context; ack_request->VF_ID = 0; /* TODO */ ack_request->VP_ID = 0; - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); } /** @@ -4026,7 +4026,7 @@ _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc, mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; mpi_request->DevHandle = cpu_to_le16(handle); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); } /** @@ -4734,12 +4734,12 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) { mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len | MPI25_SCSIIO_IOFLAGS_FAST_PATH); - mpt3sas_base_put_smid_fast_path(ioc, smid, handle); + ioc->put_smid_fast_path(ioc, smid, handle); } else ioc->put_smid_scsi_io(ioc, smid, le16_to_cpu(mpi_request->DevHandle)); } else - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); return 0; out: @@ -5210,6 +5210,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ((ioc_status & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) { st->direct_io = 0; + st->scmd = scmd; memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); mpi_request->DevHandle = cpu_to_le16(sas_device_priv_data->sas_target->handle); @@ -7601,7 +7602,7 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num) handle, phys_disk_num)); init_completion(&ioc->scsih_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { @@ -9633,7 +9634,7 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) if (!ioc->hide_ir_msg) ioc_info(ioc, "IR shutdown (sending)\n"); init_completion(&ioc->scsih_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { @@ -9670,6 +9671,7 @@ static void scsih_remove(struct pci_dev *pdev) struct _pcie_device *pcie_device, *pcienext; struct workqueue_struct *wq; unsigned long flags; + Mpi2ConfigReply_t mpi_reply; ioc->remove_host = 1; @@ -9684,7 +9686,13 @@ static void scsih_remove(struct pci_dev *pdev) spin_unlock_irqrestore(&ioc->fw_event_lock, flags); if (wq) destroy_workqueue(wq); - + /* + * Copy back the unmodified ioc page1. so that on next driver load, + * current modified changes on ioc page1 won't take effect. + */ + if (ioc->is_aero_ioc) + mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, + &ioc->ioc_pg1_copy); /* release all the volumes */ _scsih_ir_shutdown(ioc); sas_remove_host(shost); @@ -9747,6 +9755,7 @@ scsih_shutdown(struct pci_dev *pdev) struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); struct workqueue_struct *wq; unsigned long flags; + Mpi2ConfigReply_t mpi_reply; ioc->remove_host = 1; @@ -9761,6 +9770,13 @@ scsih_shutdown(struct pci_dev *pdev) spin_unlock_irqrestore(&ioc->fw_event_lock, flags); if (wq) destroy_workqueue(wq); + /* + * Copy back the unmodified ioc page1 so that on next driver load, + * current modified changes on ioc page1 won't take effect. + */ + if (ioc->is_aero_ioc) + mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, + &ioc->ioc_pg1_copy); _scsih_ir_shutdown(ioc); mpt3sas_base_detach(ioc); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 60ae2d0feb2b..5324662751bf 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -367,7 +367,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, ioc_info(ioc, "report_manufacture - send to sas_addr(0x%016llx)\n", (u64)sas_address)); init_completion(&ioc->transport_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { @@ -1139,7 +1139,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, (u64)phy->identify.sas_address, phy->number)); init_completion(&ioc->transport_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { @@ -1434,7 +1434,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, (u64)phy->identify.sas_address, phy->number, phy_operation)); init_completion(&ioc->transport_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { @@ -1911,7 +1911,7 @@ _transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, ioc_info(ioc, "%s: sending smp request\n", __func__)); init_completion(&ioc->transport_cmds.done); - mpt3sas_base_put_smid_default(ioc, smid); + ioc->put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index 6dcae0e50018..3e0b8ebe257f 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -1193,7 +1193,7 @@ static int mvs_dev_found_notify(struct domain_device *dev, int lock) mvi_device->dev_type = dev->dev_type; mvi_device->mvi_info = mvi; mvi_device->sas_device = dev; - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { + if (parent_dev && dev_is_expander(parent_dev->dev_type)) { int phy_id; u8 phy_num = parent_dev->ex_dev.num_phys; struct ex_phy *phy; diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index b7d7ec435487..519edc796691 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -50,9 +50,6 @@ extern struct mvs_info *tgt_mvi; extern const struct mvs_dispatch mvs_64xx_dispatch; extern const struct mvs_dispatch mvs_94xx_dispatch; -#define DEV_IS_EXPANDER(type) \ - ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE)) - #define bit(n) ((u64)1 << n) #define for_each_phy(__lseq_mask, __mc, __lseq) \ diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c deleted file mode 100644 index 815bb4097c1b..000000000000 --- a/drivers/scsi/osst.c +++ /dev/null @@ -1,6108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying - file Documentation/scsi/st.txt for more information. - - History: - - OnStream SCSI Tape support (osst) cloned from st.c by - Willem Riede (osst@riede.org) Feb 2000 - Fixes ... Kurt Garloff Mar 2000 - - Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. - Contribution and ideas from several people including (in alphabetical - order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer, - Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale. - - Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede - email osst@riede.org - - $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ - - Microscopic alterations - Rik Ling, 2000/12/21 - Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara - Some small formal changes - aeb, 950809 -*/ - -static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $"; -static const char * osst_version = "0.99.4"; - -/* The "failure to reconnect" firmware bug */ -#define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/ -#define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/ -#define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7) - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* The driver prints some debugging information on the console if DEBUG - is defined and non-zero. */ -#define DEBUG 0 - -/* The message level for the debug messages is currently set to KERN_NOTICE - so that people can easily see the messages. Later when the debugging messages - in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ -#define OSST_DEB_MSG KERN_NOTICE - -#include -#include -#include -#include -#include -#include -#include - -#define ST_KILOBYTE 1024 - -#include "st.h" -#include "osst.h" -#include "osst_options.h" -#include "osst_detect.h" - -static DEFINE_MUTEX(osst_int_mutex); -static int max_dev = 0; -static int write_threshold_kbs = 0; -static int max_sg_segs = 0; - -#ifdef MODULE -MODULE_AUTHOR("Willem Riede"); -MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR); -MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE); - -module_param(max_dev, int, 0444); -MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)"); - -module_param(write_threshold_kbs, int, 0644); -MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)"); - -module_param(max_sg_segs, int, 0644); -MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)"); -#else -static struct osst_dev_parm { - char *name; - int *val; -} parms[] __initdata = { - { "max_dev", &max_dev }, - { "write_threshold_kbs", &write_threshold_kbs }, - { "max_sg_segs", &max_sg_segs } -}; -#endif - -/* Some default definitions have been moved to osst_options.h */ -#define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE) -#define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE) - -/* The buffer size should fit into the 24 bits for length in the - 6-byte SCSI read and write commands. */ -#if OSST_BUFFER_SIZE >= (2 << 24 - 1) -#error "Buffer size should not exceed (2 << 24 - 1) bytes!" -#endif - -#if DEBUG -static int debugging = 1; -/* uncomment define below to test error recovery */ -// #define OSST_INJECT_ERRORS 1 -#endif - -/* Do not retry! The drive firmware already retries when appropriate, - and when it tries to tell us something, we had better listen... */ -#define MAX_RETRIES 0 - -#define NO_TAPE NOT_READY - -#define OSST_WAIT_POSITION_COMPLETE (HZ > 200 ? HZ / 200 : 1) -#define OSST_WAIT_WRITE_COMPLETE (HZ / 12) -#define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2) - -#define OSST_TIMEOUT (200 * HZ) -#define OSST_LONG_TIMEOUT (1800 * HZ) - -#define TAPE_NR(x) (iminor(x) & ((1 << ST_MODE_SHIFT)-1)) -#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) -#define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0) -#define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1)) - -/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower - 24 bits) */ -#define SET_DENS_AND_BLK 0x10001 - -static int osst_buffer_size = OSST_BUFFER_SIZE; -static int osst_write_threshold = OSST_WRITE_THRESHOLD; -static int osst_max_sg_segs = OSST_MAX_SG; -static int osst_max_dev = OSST_MAX_TAPES; -static int osst_nr_dev; - -static struct osst_tape **os_scsi_tapes = NULL; -static DEFINE_RWLOCK(os_scsi_tapes_lock); - -static int modes_defined = 0; - -static struct osst_buffer *new_tape_buffer(int, int, int); -static int enlarge_buffer(struct osst_buffer *, int); -static void normalize_buffer(struct osst_buffer *); -static int append_to_buffer(const char __user *, struct osst_buffer *, int); -static int from_buffer(struct osst_buffer *, char __user *, int); -static int osst_zero_buffer_tail(struct osst_buffer *); -static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *); -static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *); - -static int osst_probe(struct device *); -static int osst_remove(struct device *); - -static struct scsi_driver osst_template = { - .gendrv = { - .name = "osst", - .owner = THIS_MODULE, - .probe = osst_probe, - .remove = osst_remove, - } -}; - -static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt, - unsigned int cmd_in, unsigned long arg); - -static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip); - -static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt); - -static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt); - -static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending); - -static inline char *tape_name(struct osst_tape *tape) -{ - return tape->drive->disk_name; -} - -/* Routines that handle the interaction with mid-layer SCSI routines */ - - -/* Normalize Sense */ -static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s) -{ - const u8 *ucp; - const u8 *sense = SRpnt->sense; - - s->have_sense = scsi_normalize_sense(SRpnt->sense, - SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); - s->flags = 0; - - if (s->have_sense) { - s->deferred = 0; - s->remainder_valid = - scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64); - switch (sense[0] & 0x7f) { - case 0x71: - s->deferred = 1; - /* fall through */ - case 0x70: - s->fixed_format = 1; - s->flags = sense[2] & 0xe0; - break; - case 0x73: - s->deferred = 1; - /* fall through */ - case 0x72: - s->fixed_format = 0; - ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4); - s->flags = ucp ? (ucp[3] & 0xe0) : 0; - break; - } - } -} - -/* Convert the result to success code */ -static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) -{ - char *name = tape_name(STp); - int result = SRpnt->result; - u8 * sense = SRpnt->sense, scode; -#if DEBUG - const char *stp; -#endif - struct st_cmdstatus *cmdstatp; - - if (!result) - return 0; - - cmdstatp = &STp->buffer->cmdstat; - osst_analyze_sense(SRpnt, cmdstatp); - - if (cmdstatp->have_sense) - scode = STp->buffer->cmdstat.sense_hdr.sense_key; - else - scode = 0; -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n", - name, result, - SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], - SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); - if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n", - name, scode, sense[12], sense[13]); - if (cmdstatp->have_sense) - __scsi_print_sense(STp->device, name, - SRpnt->sense, SCSI_SENSE_BUFFERSIZE); - } - else -#endif - if (cmdstatp->have_sense && ( - scode != NO_SENSE && - scode != RECOVERED_ERROR && -/* scode != UNIT_ATTENTION && */ - scode != BLANK_CHECK && - scode != VOLUME_OVERFLOW && - SRpnt->cmd[0] != MODE_SENSE && - SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */ - if (cmdstatp->have_sense) { - printk(KERN_WARNING "%s:W: Command with sense data:\n", name); - __scsi_print_sense(STp->device, name, - SRpnt->sense, SCSI_SENSE_BUFFERSIZE); - } - else { - static int notyetprinted = 1; - - printk(KERN_WARNING - "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n", - name, result, driver_byte(result), - host_byte(result)); - if (notyetprinted) { - notyetprinted = 0; - printk(KERN_INFO - "%s:I: This warning may be caused by your scsi controller,\n", name); - printk(KERN_INFO - "%s:I: it has been reported with some Buslogic cards.\n", name); - } - } - } - STp->pos_unknown |= STp->device->was_reset; - - if (cmdstatp->have_sense && scode == RECOVERED_ERROR) { - STp->recover_count++; - STp->recover_erreg++; -#if DEBUG - if (debugging) { - if (SRpnt->cmd[0] == READ_6) - stp = "read"; - else if (SRpnt->cmd[0] == WRITE_6) - stp = "write"; - else - stp = "ioctl"; - printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp, - STp->recover_count); - } -#endif - if ((sense[2] & 0xe0) == 0) - return 0; - } - return (-EIO); -} - - -/* Wakeup from interrupt */ -static void osst_end_async(struct request *req, blk_status_t status) -{ - struct scsi_request *rq = scsi_req(req); - struct osst_request *SRpnt = req->end_io_data; - struct osst_tape *STp = SRpnt->stp; - struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - - STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result; -#if DEBUG - STp->write_pending = 0; -#endif - if (rq->sense_len) - memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE); - if (SRpnt->waiting) - complete(SRpnt->waiting); - - if (SRpnt->bio) { - kfree(mdata->pages); - blk_rq_unmap_user(SRpnt->bio); - } - - blk_put_request(req); -} - -/* osst_request memory management */ -static struct osst_request *osst_allocate_request(void) -{ - return kzalloc(sizeof(struct osst_request), GFP_KERNEL); -} - -static void osst_release_request(struct osst_request *streq) -{ - kfree(streq); -} - -static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd, - int cmd_len, int data_direction, void *buffer, unsigned bufflen, - int use_sg, int timeout, int retries) -{ - struct request *req; - struct scsi_request *rq; - struct page **pages = NULL; - struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - - int err = 0; - int write = (data_direction == DMA_TO_DEVICE); - - req = blk_get_request(SRpnt->stp->device->request_queue, - write ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0); - if (IS_ERR(req)) - return DRIVER_ERROR << 24; - - rq = scsi_req(req); - req->rq_flags |= RQF_QUIET; - - SRpnt->bio = NULL; - - if (use_sg) { - struct scatterlist *sg, *sgl = (struct scatterlist *)buffer; - int i; - - pages = kcalloc(use_sg, sizeof(struct page *), GFP_KERNEL); - if (!pages) - goto free_req; - - for_each_sg(sgl, sg, use_sg, i) - pages[i] = sg_page(sg); - - mdata->null_mapped = 1; - - mdata->page_order = get_order(sgl[0].length); - mdata->nr_entries = - DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order); - mdata->offset = 0; - - err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL); - if (err) { - kfree(pages); - goto free_req; - } - SRpnt->bio = req->bio; - mdata->pages = pages; - - } else if (bufflen) { - err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL); - if (err) - goto free_req; - } - - rq->cmd_len = cmd_len; - memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ - memcpy(rq->cmd, cmd, rq->cmd_len); - req->timeout = timeout; - rq->retries = retries; - req->end_io_data = SRpnt; - - blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async); - return 0; -free_req: - blk_put_request(req); - return DRIVER_ERROR << 24; -} - -/* Do the scsi command. Waits until command performed if do_wait is true. - Otherwise osst_write_behind_check() is used to check that the command - has finished. */ -static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp, - unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait) -{ - unsigned char *bp; - unsigned short use_sg; -#ifdef OSST_INJECT_ERRORS - static int inject = 0; - static int repeat = 0; -#endif - struct completion *waiting; - - /* if async, make sure there's no command outstanding */ - if (!do_wait && ((STp->buffer)->last_SRpnt)) { - printk(KERN_ERR "%s: Async command already active.\n", - tape_name(STp)); - if (signal_pending(current)) - (STp->buffer)->syscall_result = (-EINTR); - else - (STp->buffer)->syscall_result = (-EBUSY); - return NULL; - } - - if (SRpnt == NULL) { - SRpnt = osst_allocate_request(); - if (SRpnt == NULL) { - printk(KERN_ERR "%s: Can't allocate SCSI request.\n", - tape_name(STp)); - if (signal_pending(current)) - (STp->buffer)->syscall_result = (-EINTR); - else - (STp->buffer)->syscall_result = (-EBUSY); - return NULL; - } - SRpnt->stp = STp; - } - - /* If async IO, set last_SRpnt. This ptr tells write_behind_check - which IO is outstanding. It's nulled out when the IO completes. */ - if (!do_wait) - (STp->buffer)->last_SRpnt = SRpnt; - - waiting = &STp->wait; - init_completion(waiting); - SRpnt->waiting = waiting; - - use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0; - if (use_sg) { - bp = (char *)&(STp->buffer->sg[0]); - if (STp->buffer->sg_segs < use_sg) - use_sg = STp->buffer->sg_segs; - } - else - bp = (STp->buffer)->b_data; - - memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); - STp->buffer->cmdstat.have_sense = 0; - STp->buffer->syscall_result = 0; - - if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, - use_sg, timeout, retries)) - /* could not allocate the buffer or request was too large */ - (STp->buffer)->syscall_result = (-EBUSY); - else if (do_wait) { - wait_for_completion(waiting); - SRpnt->waiting = NULL; - STp->buffer->syscall_result = osst_chk_result(STp, SRpnt); -#ifdef OSST_INJECT_ERRORS - if (STp->buffer->syscall_result == 0 && - cmd[0] == READ_6 && - cmd[4] && - ( (++ inject % 83) == 29 || - (STp->first_frame_position == 240 - /* or STp->read_error_frame to fail again on the block calculated above */ && - ++repeat < 3))) { - printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp)); - STp->buffer->last_result_fatal = 1; - } -#endif - } - return SRpnt; -} - - -/* Handle the write-behind checking (downs the semaphore) */ -static void osst_write_behind_check(struct osst_tape *STp) -{ - struct osst_buffer * STbuffer; - - STbuffer = STp->buffer; - -#if DEBUG - if (STp->write_pending) - STp->nbr_waits++; - else - STp->nbr_finished++; -#endif - wait_for_completion(&(STp->wait)); - STp->buffer->last_SRpnt->waiting = NULL; - - STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt); - - if (STp->buffer->syscall_result) - STp->buffer->syscall_result = - osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1); - else - STp->first_frame_position++; - - osst_release_request(STp->buffer->last_SRpnt); - - if (STbuffer->writing < STbuffer->buffer_bytes) - printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n"); - - STbuffer->last_SRpnt = NULL; - STbuffer->buffer_bytes -= STbuffer->writing; - STbuffer->writing = 0; - - return; -} - - - -/* Onstream specific Routines */ -/* - * Initialize the OnStream AUX - */ -static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number, - int logical_blk_num, int blk_sz, int blk_cnt) -{ - os_aux_t *aux = STp->buffer->aux; - os_partition_t *par = &aux->partition; - os_dat_t *dat = &aux->dat; - - if (STp->raw) return; - - memset(aux, 0, sizeof(*aux)); - aux->format_id = htonl(0); - memcpy(aux->application_sig, "LIN4", 4); - aux->hdwr = htonl(0); - aux->frame_type = frame_type; - - switch (frame_type) { - case OS_FRAME_TYPE_HEADER: - aux->update_frame_cntr = htonl(STp->update_frame_cntr); - par->partition_num = OS_CONFIG_PARTITION; - par->par_desc_ver = OS_PARTITION_VERSION; - par->wrt_pass_cntr = htons(0xffff); - /* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */ - par->first_frame_ppos = htonl(0); - par->last_frame_ppos = htonl(0xbb7); - aux->frame_seq_num = htonl(0); - aux->logical_blk_num_high = htonl(0); - aux->logical_blk_num = htonl(0); - aux->next_mark_ppos = htonl(STp->first_mark_ppos); - break; - case OS_FRAME_TYPE_DATA: - case OS_FRAME_TYPE_MARKER: - dat->dat_sz = 8; - dat->reserved1 = 0; - dat->entry_cnt = 1; - dat->reserved3 = 0; - dat->dat_list[0].blk_sz = htonl(blk_sz); - dat->dat_list[0].blk_cnt = htons(blk_cnt); - dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER? - OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA; - dat->dat_list[0].reserved = 0; - /* fall through */ - case OS_FRAME_TYPE_EOD: - aux->update_frame_cntr = htonl(0); - par->partition_num = OS_DATA_PARTITION; - par->par_desc_ver = OS_PARTITION_VERSION; - par->wrt_pass_cntr = htons(STp->wrt_pass_cntr); - par->first_frame_ppos = htonl(STp->first_data_ppos); - par->last_frame_ppos = htonl(STp->capacity); - aux->frame_seq_num = htonl(frame_seq_number); - aux->logical_blk_num_high = htonl(0); - aux->logical_blk_num = htonl(logical_blk_num); - break; - default: ; /* probably FILL */ - } - aux->filemark_cnt = htonl(STp->filemark_cnt); - aux->phys_fm = htonl(0xffffffff); - aux->last_mark_ppos = htonl(STp->last_mark_ppos); - aux->last_mark_lbn = htonl(STp->last_mark_lbn); -} - -/* - * Verify that we have the correct tape frame - */ -static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet) -{ - char * name = tape_name(STp); - os_aux_t * aux = STp->buffer->aux; - os_partition_t * par = &(aux->partition); - struct st_partstat * STps = &(STp->ps[STp->partition]); - unsigned int blk_cnt, blk_sz, i; - - if (STp->raw) { - if (STp->buffer->syscall_result) { - for (i=0; i < STp->buffer->sg_segs; i++) - memset(page_address(sg_page(&STp->buffer->sg[i])), - 0, STp->buffer->sg[i].length); - strcpy(STp->buffer->b_data, "READ ERROR ON FRAME"); - } else - STp->buffer->buffer_bytes = OS_FRAME_SIZE; - return 1; - } - if (STp->buffer->syscall_result) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name); -#endif - return 0; - } - if (ntohl(aux->format_id) != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id)); -#endif - goto err_out; - } - if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 && - (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name); -#endif - goto err_out; - } - if (par->partition_num != OS_DATA_PARTITION) { - if (!STp->linux_media || STp->linux_media_version != 2) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n", - name, par->partition_num); -#endif - goto err_out; - } - } - if (par->par_desc_ver != OS_PARTITION_VERSION) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver); -#endif - goto err_out; - } - if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n", - name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr); -#endif - goto err_out; - } - if (aux->frame_type != OS_FRAME_TYPE_DATA && - aux->frame_type != OS_FRAME_TYPE_EOD && - aux->frame_type != OS_FRAME_TYPE_MARKER) { - if (!quiet) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type); -#endif - } - goto err_out; - } - if (aux->frame_type == OS_FRAME_TYPE_EOD && - STp->first_frame_position < STp->eod_frame_ppos) { - printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name, - STp->first_frame_position); - goto err_out; - } - if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) { - if (!quiet) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n", - name, ntohl(aux->frame_seq_num), frame_seq_number); -#endif - } - goto err_out; - } - if (aux->frame_type == OS_FRAME_TYPE_MARKER) { - STps->eof = ST_FM_HIT; - - i = ntohl(aux->filemark_cnt); - if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt || - STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name, - STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected", - i, STp->first_frame_position - 1); -#endif - STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1); - if (i >= STp->filemark_cnt) - STp->filemark_cnt = i+1; - } - } - if (aux->frame_type == OS_FRAME_TYPE_EOD) { - STps->eof = ST_EOD_1; - STp->frame_in_buffer = 1; - } - if (aux->frame_type == OS_FRAME_TYPE_DATA) { - blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt); - blk_sz = ntohl(aux->dat.dat_list[0].blk_sz); - STp->buffer->buffer_bytes = blk_cnt * blk_sz; - STp->buffer->read_pointer = 0; - STp->frame_in_buffer = 1; - - /* See what block size was used to write file */ - if (STp->block_size != blk_sz && blk_sz > 0) { - printk(KERN_INFO - "%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n", - name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k', - STp->block_size<1024?STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); - STp->block_size = blk_sz; - STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz; - } - STps->eof = ST_NOEOF; - } - STp->frame_seq_number = ntohl(aux->frame_seq_num); - STp->logical_blk_num = ntohl(aux->logical_blk_num); - return 1; - -err_out: - if (STp->read_error_frame == 0) - STp->read_error_frame = STp->first_frame_position - 1; - return 0; -} - -/* - * Wait for the unit to become Ready - */ -static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned timeout, int initial_delay) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name); -#endif - - if (initial_delay > 0) - msleep(jiffies_to_msecs(initial_delay)); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - - while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && - (( SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 && - (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8) ) || - ( SRpnt->sense[2] == 6 && SRpnt->sense[12] == 0x28 && - SRpnt->sense[13] == 0 ) )) { -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - msleep(100); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - } - *aSRpnt = SRpnt; -#if DEBUG - debugging = dbg; -#endif - if ( STp->buffer->syscall_result && - osst_write_error_recovery(STp, aSRpnt, 0) ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, - STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - return (-EIO); - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name); -#endif - return 0; -} - -/* - * Wait for a tape to be inserted in the unit - */ -static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name); -#endif - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - - while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && - SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0 ) { -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - msleep(100); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - } - *aSRpnt = SRpnt; -#if DEBUG - debugging = dbg; -#endif - if ( STp->buffer->syscall_result && SRpnt->sense[2] != 2 && - SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name); - printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, - STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - return 0; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name); -#endif - return 1; -} - -static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame) -{ - int retval; - - osst_wait_ready(STp, aSRpnt, 15 * 60, 0); /* TODO - can this catch a write error? */ - retval = osst_set_frame_position(STp, aSRpnt, frame, 0); - if (retval) return (retval); - osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE); - return (osst_get_frame_position(STp, aSRpnt)); -} - -/* - * Wait for write(s) to complete - */ -static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int result = 0; - int delay = OSST_WAIT_WRITE_COMPLETE; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name); -#endif - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - if (STp->buffer->syscall_result) { - if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) { - if (SRpnt->sense[13] == 8) { - delay = OSST_WAIT_LONG_WRITE_COMPLETE; - } - } else - result = osst_write_error_recovery(STp, aSRpnt, 0); - } - result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay); - STp->ps[STp->partition].rw = OS_WRITING_COMPLETE; - - return (result); -} - -#define OSST_POLL_PER_SEC 10 -static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to) -{ - unsigned long startwait = jiffies; - char * name = tape_name(STp); -#if DEBUG - char notyetprinted = 1; -#endif - if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING) - printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name); - - while (time_before (jiffies, startwait + to*HZ)) - { - int result; - result = osst_get_frame_position(STp, aSRpnt); - if (result == -EIO) - if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0) - return 0; /* successful recovery leaves drive ready for frame */ - if (result < 0) break; - if (STp->first_frame_position == curr && - ((minlast < 0 && - (signed)STp->last_frame_position > (signed)curr + minlast) || - (minlast >= 0 && STp->cur_frames > minlast) - ) && result >= 0) - { -#if DEBUG - if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC)) - printk (OSST_DEB_MSG - "%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, - result, (jiffies-startwait)/HZ, - (((jiffies-startwait)%HZ)*10)/HZ); -#endif - return 0; - } -#if DEBUG - if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted) - { - printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, result); - notyetprinted--; - } -#endif - msleep(1000 / OSST_POLL_PER_SEC); - } -#if DEBUG - printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, - (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ); -#endif - return -EBUSY; -} - -static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing) -{ - struct osst_request * SRpnt; - unsigned char cmd[MAX_COMMAND_SIZE]; - unsigned long startwait = jiffies; - int retval = 1; - char * name = tape_name(STp); - - if (writing) { - char mybuf[24]; - char * olddata = STp->buffer->b_data; - int oldsize = STp->buffer->buffer_size; - - /* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */ - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, - MAX_RETRIES, 1); - - while (retval && time_before (jiffies, startwait + 5*60*HZ)) { - - if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) { - - /* some failure - not just not-ready */ - retval = osst_write_error_recovery(STp, aSRpnt, 0); - break; - } - schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC); - - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_POSITION; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout, - MAX_RETRIES, 1); - - retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 ); - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - } - if (retval) - printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name); - } else - /* TODO - figure out which error conditions can be handled */ - if (STp->buffer->syscall_result) - printk(KERN_WARNING - "%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name, - (*aSRpnt)->sense[ 2] & 0x0f, - (*aSRpnt)->sense[12], - (*aSRpnt)->sense[13]); - - return retval; -} - -/* - * Read the next OnStream tape frame at the current location - */ -static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int retval = 0; -#if DEBUG - os_aux_t * aux = STp->buffer->aux; - char * name = tape_name(STp); -#endif - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout)) - retval = osst_recover_wait_frame(STp, aSRpnt, 0); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_6; - cmd[1] = 1; - cmd[4] = 1; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) - return (-EBUSY); - - if ((STp->buffer)->syscall_result) { - retval = 1; - if (STp->read_error_frame == 0) { - STp->read_error_frame = STp->first_frame_position; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame); -#endif - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", - name, - SRpnt->sense[0], SRpnt->sense[1], - SRpnt->sense[2], SRpnt->sense[3], - SRpnt->sense[4], SRpnt->sense[5], - SRpnt->sense[6], SRpnt->sense[7]); -#endif - } - else - STp->first_frame_position++; -#if DEBUG - if (debugging) { - char sig[8]; int i; - for (i=0;i<4;i++) - sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i]; - sig[4] = '\0'; - printk(OSST_DEB_MSG - "%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig, - ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr), - aux->frame_type==1?"EOD":aux->frame_type==2?"MARK": - aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL", - ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), - ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) ); - if (aux->frame_type==2) - printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name, - ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn)); - printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval); - } -#endif - return (retval); -} - -static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - struct osst_request * SRpnt ; - unsigned char cmd[MAX_COMMAND_SIZE]; - int retval = 0; - char * name = tape_name(STp); - - if (STps->rw != ST_READING) { /* Initialize read operation */ - if (STps->rw == ST_WRITING || STp->dirty) { - STp->write_type = OS_WRITE_DATA; - osst_flush_write_buffer(STp, aSRpnt); - osst_flush_drive_buffer(STp, aSRpnt); - } - STps->rw = ST_READING; - STp->frame_in_buffer = 0; - - /* - * Issue a read 0 command to get the OnStream drive - * read frames into its buffer. - */ - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_6; - cmd[1] = 1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if ((retval = STp->buffer->syscall_result)) - printk(KERN_WARNING "%s:W: Error starting read ahead\n", name); - } - - return retval; -} - -static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, - int frame_seq_number, int quiet) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - char * name = tape_name(STp); - int cnt = 0, - bad = 0, - past = 0, - x, - position; - - /* - * If we want just any frame (-1) and there is a frame in the buffer, return it - */ - if (frame_seq_number == -1 && STp->frame_in_buffer) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number); -#endif - return (STps->eof); - } - /* - * Search and wait for the next logical tape frame - */ - while (1) { - if (cnt++ > 400) { - printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n", - name, frame_seq_number); - if (STp->read_error_frame) { - osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n", - name, STp->read_error_frame); -#endif - STp->read_error_frame = 0; - STp->abort_count++; - } - return (-EIO); - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n", - name, frame_seq_number, cnt); -#endif - if ( osst_initiate_read(STp, aSRpnt) - || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) { - if (STp->raw) - return (-EIO); - position = osst_get_frame_position(STp, aSRpnt); - if (position >= 0xbae && position < 0xbb8) - position = 0xbb8; - else if (position > STp->eod_frame_ppos || ++bad == 10) { - position = STp->read_error_frame - 1; - bad = 0; - } - else { - position += 29; - cnt += 19; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n", - name, position); -#endif - osst_set_frame_position(STp, aSRpnt, position, 0); - continue; - } - if (osst_verify_frame(STp, frame_seq_number, quiet)) - break; - if (osst_verify_frame(STp, -1, quiet)) { - x = ntohl(STp->buffer->aux->frame_seq_num); - if (STp->fast_open) { - printk(KERN_WARNING - "%s:W: Found logical frame %d instead of %d after fast open\n", - name, x, frame_seq_number); - STp->header_ok = 0; - STp->read_error_frame = 0; - return (-EIO); - } - if (x > frame_seq_number) { - if (++past > 3) { - /* positioning backwards did not bring us to the desired frame */ - position = STp->read_error_frame - 1; - } - else { - position = osst_get_frame_position(STp, aSRpnt) - + frame_seq_number - x - 1; - - if (STp->first_frame_position >= 3000 && position < 3000) - position -= 10; - } -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Found logical frame %d while looking for %d: back up %d\n", - name, x, frame_seq_number, - STp->first_frame_position - position); -#endif - osst_set_frame_position(STp, aSRpnt, position, 0); - cnt += 10; - } - else - past = 0; - } - if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name); -#endif - osst_set_frame_position(STp, aSRpnt, 0xbb8, 0); - cnt--; - } - STp->frame_in_buffer = 0; - } - if (cnt > 1) { - STp->recover_count++; - STp->recover_erreg++; - printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n", - name, STp->read_error_frame); - } - STp->read_count++; - -#if DEBUG - if (debugging || STps->eof) - printk(OSST_DEB_MSG - "%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n", - name, frame_seq_number, STp->frame_seq_number, STps->eof); -#endif - STp->fast_open = 0; - STp->read_error_frame = 0; - return (STps->eof); -} - -static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - char * name = tape_name(STp); - int retries = 0; - int frame_seq_estimate, ppos_estimate, move; - - if (logical_blk_num < 0) logical_blk_num = 0; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n", - name, logical_blk_num, STp->logical_blk_num, - STp->block_size<1024?STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); -#endif - /* Do we know where we are? */ - if (STps->drv_block >= 0) { - move = logical_blk_num - STp->logical_blk_num; - if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; - move /= (OS_DATA_SIZE / STp->block_size); - frame_seq_estimate = STp->frame_seq_number + move; - } else - frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE; - - if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10; - else ppos_estimate = frame_seq_estimate + 20; - while (++retries < 10) { - if (ppos_estimate > STp->eod_frame_ppos-2) { - frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate; - ppos_estimate = STp->eod_frame_ppos - 2; - } - if (frame_seq_estimate < 0) { - frame_seq_estimate = 0; - ppos_estimate = 10; - } - osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0); - if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) { - /* we've located the estimated frame, now does it have our block? */ - if (logical_blk_num < STp->logical_blk_num || - logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) { - if (STps->eof == ST_FM_HIT) - move = logical_blk_num < STp->logical_blk_num? -2 : 1; - else { - move = logical_blk_num - STp->logical_blk_num; - if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; - move /= (OS_DATA_SIZE / STp->block_size); - } - if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n", - name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, - STp->logical_blk_num, logical_blk_num, move); -#endif - frame_seq_estimate += move; - ppos_estimate += move; - continue; - } else { - STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size; - STp->buffer->buffer_bytes -= STp->buffer->read_pointer; - STp->logical_blk_num = logical_blk_num; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n", - name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer, - STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size, - STp->block_size); -#endif - STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); - if (STps->eof == ST_FM_HIT) { - STps->drv_file++; - STps->drv_block = 0; - } else { - STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? - STp->logical_blk_num - - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): - -1; - } - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; - return 0; - } - } - if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0) - goto error; - /* we are not yet at the estimated frame, adjust our estimate of its physical position */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n", - name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, - STp->logical_blk_num, logical_blk_num); -#endif - if (frame_seq_estimate != STp->frame_seq_number) - ppos_estimate += frame_seq_estimate - STp->frame_seq_number; - else - break; - } -error: - printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n", - name, logical_blk_num, STp->logical_blk_num, retries); - return (-EIO); -} - -/* The values below are based on the OnStream frame payload size of 32K == 2**15, - * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block - * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions - * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. - */ -#define OSST_FRAME_SHIFT 6 -#define OSST_SECTOR_SHIFT 9 -#define OSST_SECTOR_MASK 0x03F - -static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int sector; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG - "%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n", - name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, - STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block, - STp->ps[STp->partition].rw == ST_WRITING?'w':'r', - STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes: - STp->buffer->read_pointer, STp->ps[STp->partition].eof); -#endif - /* do we know where we are inside a file? */ - if (STp->ps[STp->partition].drv_block >= 0) { - sector = (STp->frame_in_buffer ? STp->first_frame_position-1 : - STp->first_frame_position) << OSST_FRAME_SHIFT; - if (STp->ps[STp->partition].rw == ST_WRITING) - sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; - else - sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; - } else { - sector = osst_get_frame_position(STp, aSRpnt); - if (sector > 0) - sector <<= OSST_FRAME_SHIFT; - } - return sector; -} - -static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - int frame = sector >> OSST_FRAME_SHIFT, - offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT, - r; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n", - name, sector, frame, offset); -#endif - if (frame < 0 || frame >= STp->capacity) return (-ENXIO); - - if (frame <= STp->first_data_ppos) { - STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0; - return (osst_set_frame_position(STp, aSRpnt, frame, 0)); - } - r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0); - if (r < 0) return r; - - r = osst_get_logical_frame(STp, aSRpnt, -1, 1); - if (r < 0) return r; - - if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO); - - if (offset) { - STp->logical_blk_num += offset / STp->block_size; - STp->buffer->read_pointer = offset; - STp->buffer->buffer_bytes -= offset; - } else { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; - } - STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); - if (STps->eof == ST_FM_HIT) { - STps->drv_file++; - STps->drv_block = 0; - } else { - STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? - STp->logical_blk_num - - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): - -1; - } - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n", - name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, - STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof); -#endif - return 0; -} - -/* - * Read back the drive's internal buffer contents, as a part - * of the write error recovery mechanism for old OnStream - * firmware revisions. - * Precondition for this function to work: all frames in the - * drive's buffer must be of one type (DATA, MARK or EOD)! - */ -static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int frame, unsigned int skip, int pending) -{ - struct osst_request * SRpnt = * aSRpnt; - unsigned char * buffer, * p; - unsigned char cmd[MAX_COMMAND_SIZE]; - int flag, new_frame, i; - int nframes = STp->cur_frames; - int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num) - - (nframes + pending - 1); - int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num) - - (nframes + pending - 1) * blks_per_frame; - char * name = tape_name(STp); - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; -#endif - - if ((buffer = vmalloc(array_size((nframes + 1), OS_DATA_SIZE))) == NULL) - return (-EIO); - - printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n", - name, nframes, pending?" and one that was pending":""); - - osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE])); -#if DEBUG - if (pending && debugging) - printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n", - name, frame_seq_number + nframes, - logical_blk_num + nframes * blks_per_frame, - p[0], p[1], p[2], p[3]); -#endif - for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = 0x3C; /* Buffer Read */ - cmd[1] = 6; /* Retrieve Faulty Block */ - cmd[7] = 32768 >> 8; - cmd[8] = 32768 & 0xff; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - - if ((STp->buffer)->syscall_result || !SRpnt) { - printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name); - vfree(buffer); - *aSRpnt = SRpnt; - return (-EIO); - } - osst_copy_from_buffer(STp->buffer, p); -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n", - name, frame_seq_number + i, p[0], p[1], p[2], p[3]); -#endif - } - *aSRpnt = SRpnt; - osst_get_frame_position(STp, aSRpnt); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames); -#endif - /* Write synchronously so we can be sure we're OK again and don't have to recover recursively */ - /* In the header we don't actually re-write the frames that fail, just the ones after them */ - - for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) { - - if (flag) { - if (STp->write_type == OS_WRITE_HEADER) { - i += skip; - p += skip * OS_DATA_SIZE; - } - else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990) - new_frame = 3000-i; - else - new_frame += skip; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n", - name, new_frame+i, frame_seq_number+i); -#endif - osst_set_frame_position(STp, aSRpnt, new_frame + i, 0); - osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE); - osst_get_frame_position(STp, aSRpnt); - SRpnt = * aSRpnt; - - if (new_frame > frame + 1000) { - printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name); - vfree(buffer); - return (-EIO); - } - if ( i >= nframes + pending ) break; - flag = 0; - } - osst_copy_to_buffer(STp->buffer, p); - /* - * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type! - */ - osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i, - logical_blk_num + i*blks_per_frame, - ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame); - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG - "%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n", - name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame, - p[0], p[1], p[2], p[3]); -#endif - SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - - if (STp->buffer->syscall_result) - flag = 1; - else { - p += OS_DATA_SIZE; i++; - - /* if we just sent the last frame, wait till all successfully written */ - if ( i == nframes + pending ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name); -#endif - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - flag = STp->buffer->syscall_result; - while ( !flag && time_before(jiffies, startwait + 60*HZ) ) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, - MAX_RETRIES, 1); - - if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 && - (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) { - /* in the process of becoming ready */ - msleep(100); - continue; - } - if (STp->buffer->syscall_result) - flag = 1; - break; - } -#if DEBUG - debugging = dbg; - printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); -#endif - } - } - *aSRpnt = SRpnt; - if (flag) { - if ((SRpnt->sense[ 2] & 0x0f) == 13 && - SRpnt->sense[12] == 0 && - SRpnt->sense[13] == 2) { - printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name); - vfree(buffer); - return (-EIO); /* hit end of tape = fail */ - } - i = ((SRpnt->sense[3] << 24) | - (SRpnt->sense[4] << 16) | - (SRpnt->sense[5] << 8) | - SRpnt->sense[6] ) - new_frame; - p = &buffer[i * OS_DATA_SIZE]; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i); -#endif - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n", - name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames); -#endif - } - } - if (flag) { - /* error recovery did not successfully complete */ - printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name, - STp->write_type == OS_WRITE_HEADER?"header":"body"); - } - if (!pending) - osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */ - vfree(buffer); - return 0; -} - -static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int frame, unsigned int skip, int pending) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - char * name = tape_name(STp); - int expected = 0; - int attempts = 1000 / skip; - int flag = 1; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; -#endif - - while (attempts && time_before(jiffies, startwait + 60*HZ)) { - if (flag) { -#if DEBUG - debugging = dbg; -#endif - if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990) - frame = 3000-skip; - expected = frame+skip+STp->cur_frames+pending; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n", - name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending); -#endif - osst_set_frame_position(STp, aSRpnt, frame + skip, 1); - flag = 0; - attempts--; - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n", - name, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames); -#endif - frame = STp->last_frame_position; - flag = 1; - continue; - } - if (pending && STp->cur_frames < 50) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n", - name, STp->frame_seq_number-1, STp->first_frame_position); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - - if (STp->buffer->syscall_result) { /* additional write error */ - if ((SRpnt->sense[ 2] & 0x0f) == 13 && - SRpnt->sense[12] == 0 && - SRpnt->sense[13] == 2) { - printk(KERN_ERR - "%s:E: Volume overflow in write error recovery\n", - name); - break; /* hit end of tape = fail */ - } - flag = 1; - } - else - pending = 0; - - continue; - } - if (STp->cur_frames == 0) { -#if DEBUG - debugging = dbg; - printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); -#endif - if (STp->first_frame_position != expected) { - printk(KERN_ERR "%s:A: Actual position %d - expected %d\n", - name, STp->first_frame_position, expected); - return (-EIO); - } - return 0; - } -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name); -#if DEBUG - debugging = dbg; -#endif - return (-EIO); -} - -/* - * Error recovery algorithm for the OnStream tape. - */ - -static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending) -{ - struct osst_request * SRpnt = * aSRpnt; - struct st_partstat * STps = & STp->ps[STp->partition]; - char * name = tape_name(STp); - int retval = 0; - int rw_state; - unsigned int frame, skip; - - rw_state = STps->rw; - - if ((SRpnt->sense[ 2] & 0x0f) != 3 - || SRpnt->sense[12] != 12 - || SRpnt->sense[13] != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name, - SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]); -#endif - return (-EIO); - } - frame = (SRpnt->sense[3] << 24) | - (SRpnt->sense[4] << 16) | - (SRpnt->sense[5] << 8) | - SRpnt->sense[6]; - skip = SRpnt->sense[9]; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip); -#endif - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n", - name, STp->first_frame_position, STp->last_frame_position); -#endif - switch (STp->write_type) { - case OS_WRITE_DATA: - case OS_WRITE_EOD: - case OS_WRITE_NEW_MARK: - printk(KERN_WARNING - "%s:I: Relocating %d buffered logical frames from position %u to %u\n", - name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip); - if (STp->os_fw_rev >= 10600) - retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending); - else - retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending); - printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name, - retval?"E" :"I", - retval?"" :"Don't worry, ", - retval?" not ":" "); - break; - case OS_WRITE_LAST_MARK: - printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name); - osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); - retval = -EIO; - break; - case OS_WRITE_HEADER: - printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name); - retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending); - break; - default: - printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name); - osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); - } - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n", - name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position); - printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num); -#endif - if (retval == 0) { - STp->recover_count++; - STp->recover_erreg++; - } else - STp->abort_count++; - - STps->rw = rw_state; - return retval; -} - -static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - char * name = tape_name(STp); - int cnt; - int last_mark_ppos = -1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name); -#endif - return -EIO; - } - if (STp->linux_media_version >= 4) { - /* - * direct lookup in header filemark list - */ - cnt = ntohl(STp->buffer->aux->filemark_cnt); - if (STp->header_ok && - STp->header_cache != NULL && - (cnt - mt_count) >= 0 && - (cnt - mt_count) < OS_FM_TAB_MAX && - (cnt - mt_count) < STp->filemark_cnt && - STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos) - - last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]); -#if DEBUG - if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX) - printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, - STp->header_cache == NULL?"lack of header cache":"count out of range"); - else - printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", - name, cnt, - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == - STp->buffer->aux->last_mark_ppos))?"match":"error", - mt_count, last_mark_ppos); -#endif - if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) { - osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, last_mark_ppos); - return (-EIO); - } - goto found; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name); -#endif - } - cnt = 0; - while (cnt != mt_count) { - last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos); - if (last_mark_ppos == -1) - return (-EIO); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); - cnt++; - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, last_mark_ppos); - return (-EIO); - } - } -found: - if (mt_op == MTBSFM) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * ADRL 1.1 compatible "slow" space filemarks fwd version - * - * Just scans for the filemark sequentially. - */ -static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - int cnt = 0; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); -#endif - return (-EIO); - } - while (1) { - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) - cnt++; - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); -#endif - if (STp->first_frame_position > STp->eod_frame_ppos+1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n", - name, STp->eod_frame_ppos, STp->first_frame_position-1); -#endif - STp->eod_frame_ppos = STp->first_frame_position-1; - } - return (-EIO); - } - if (cnt == mt_count) - break; - STp->frame_in_buffer = 0; - } - if (mt_op == MTFSF) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * Fast linux specific version of OnStream FSF - */ -static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - char * name = tape_name(STp); - int cnt = 0, - next_mark_ppos = -1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); -#endif - return (-EIO); - } - - if (STp->linux_media_version >= 4) { - /* - * direct lookup in header filemark list - */ - cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1; - if (STp->header_ok && - STp->header_cache != NULL && - (cnt + mt_count) < OS_FM_TAB_MAX && - (cnt + mt_count) < STp->filemark_cnt && - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos))) - - next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]); -#if DEBUG - if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX) - printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, - STp->header_cache == NULL?"lack of header cache":"count out of range"); - else - printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", - name, cnt, - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == - STp->buffer->aux->last_mark_ppos))?"match":"error", - mt_count, next_mark_ppos); -#endif - if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); - } else { - osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, next_mark_ppos); - return (-EIO); - } - if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) { - printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n", - name, cnt+mt_count, next_mark_ppos, - ntohl(STp->buffer->aux->filemark_cnt)); - return (-EIO); - } - } - } else { - /* - * Find nearest (usually previous) marker, then jump from marker to marker - */ - while (1) { - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) - break; - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); -#endif - return (-EIO); - } - if (ntohl(STp->buffer->aux->filemark_cnt) == 0) { - if (STp->first_mark_ppos == -1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); - } - osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n", - name, STp->first_mark_ppos); - return (-EIO); - } - } else { - if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0) - return (-EIO); - mt_count++; - } - } - cnt++; - while (cnt != mt_count) { - next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos); - if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt); - } -#if DEBUG - else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); - cnt++; - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, next_mark_ppos); - return (-EIO); - } - } - } - if (mt_op == MTFSF) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * In debug mode, we want to see as many errors as possible - * to test the error recovery mechanism. - */ -#if DEBUG -static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = * aSRpnt; - char * name = tape_name(STp); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH; - - (STp->buffer)->b_data[0] = cmd[4] - 1; - (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ - (STp->buffer)->b_data[2] = 0; /* Reserved */ - (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7); - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries; - - if (debugging) - printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries); - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result) - printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries); -} -#endif - - -static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int result; - int this_mark_ppos = STp->first_frame_position; - int this_mark_lbn = STp->logical_blk_num; -#if DEBUG - char * name = tape_name(STp); -#endif - - if (STp->raw) return 0; - - STp->write_type = OS_WRITE_NEW_MARK; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n", - name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn); -#endif - STp->dirty = 1; - result = osst_flush_write_buffer(STp, aSRpnt); - result |= osst_flush_drive_buffer(STp, aSRpnt); - STp->last_mark_ppos = this_mark_ppos; - STp->last_mark_lbn = this_mark_lbn; - if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX) - STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos); - if (STp->filemark_cnt++ == 0) - STp->first_mark_ppos = this_mark_ppos; - return result; -} - -static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int result; -#if DEBUG - char * name = tape_name(STp); -#endif - - if (STp->raw) return 0; - - STp->write_type = OS_WRITE_EOD; - STp->eod_frame_ppos = STp->first_frame_position; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name, - STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num); -#endif - STp->dirty = 1; - - result = osst_flush_write_buffer(STp, aSRpnt); - result |= osst_flush_drive_buffer(STp, aSRpnt); - STp->eod_frame_lfa = --(STp->frame_seq_number); - return result; -} - -static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) -{ - char * name = tape_name(STp); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where); -#endif - osst_wait_ready(STp, aSRpnt, 60 * 5, 0); - osst_set_frame_position(STp, aSRpnt, where, 0); - STp->write_type = OS_WRITE_FILLER; - while (count--) { - memcpy(STp->buffer->b_data, "Filler", 6); - STp->buffer->buffer_bytes = 6; - STp->dirty = 1; - if (osst_flush_write_buffer(STp, aSRpnt)) { - printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name); - return (-EIO); - } - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name); -#endif - return osst_flush_drive_buffer(STp, aSRpnt); -} - -static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) -{ - char * name = tape_name(STp); - int result; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where); -#endif - osst_wait_ready(STp, aSRpnt, 60 * 5, 0); - osst_set_frame_position(STp, aSRpnt, where, 0); - STp->write_type = OS_WRITE_HEADER; - while (count--) { - osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache); - STp->buffer->buffer_bytes = sizeof(os_header_t); - STp->dirty = 1; - if (osst_flush_write_buffer(STp, aSRpnt)) { - printk(KERN_INFO "%s:I: Couldn't write header frame\n", name); - return (-EIO); - } - } - result = osst_flush_drive_buffer(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done"); -#endif - return result; -} - -static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod) -{ - os_header_t * header; - int result; - char * name = tape_name(STp); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name); -#endif - if (STp->raw) return 0; - - if (STp->header_cache == NULL) { - if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { - printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); - return (-ENOMEM); - } - memset(STp->header_cache, 0, sizeof(os_header_t)); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name); -#endif - } - if (STp->header_ok) STp->update_frame_cntr++; - else STp->update_frame_cntr = 0; - - header = STp->header_cache; - strcpy(header->ident_str, "ADR_SEQ"); - header->major_rev = 1; - header->minor_rev = 4; - header->ext_trk_tb_off = htons(17192); - header->pt_par_num = 1; - header->partition[0].partition_num = OS_DATA_PARTITION; - header->partition[0].par_desc_ver = OS_PARTITION_VERSION; - header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr); - header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos); - header->partition[0].last_frame_ppos = htonl(STp->capacity); - header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos); - header->cfg_col_width = htonl(20); - header->dat_col_width = htonl(1500); - header->qfa_col_width = htonl(0); - header->ext_track_tb.nr_stream_part = 1; - header->ext_track_tb.et_ent_sz = 32; - header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0; - header->ext_track_tb.dat_ext_trk_ey.fmt = 1; - header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736); - header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0; - header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa); - header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos); - header->dat_fm_tab.fm_part_num = 0; - header->dat_fm_tab.fm_tab_ent_sz = 4; - header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cntfilemark_cnt:OS_FM_TAB_MAX); - - result = __osst_write_header(STp, aSRpnt, 0xbae, 5); - if (STp->update_frame_cntr == 0) - osst_write_filler(STp, aSRpnt, 0xbb3, 5); - result &= __osst_write_header(STp, aSRpnt, 5, 5); - - if (locate_eod) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos); -#endif - osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0); - } - if (result) - printk(KERN_ERR "%s:E: Write header failed\n", name); - else { - memcpy(STp->application_sig, "LIN4", 4); - STp->linux_media = 1; - STp->linux_media_version = 4; - STp->header_ok = 1; - } - return result; -} - -static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - if (STp->header_cache != NULL) - memset(STp->header_cache, 0, sizeof(os_header_t)); - - STp->logical_blk_num = STp->frame_seq_number = 0; - STp->frame_in_buffer = 0; - STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A; - STp->filemark_cnt = 0; - STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; - return osst_write_header(STp, aSRpnt, 1); -} - -static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos) -{ - char * name = tape_name(STp); - os_header_t * header; - os_aux_t * aux; - char id_string[8]; - int linux_media_version, - update_frame_cntr; - - if (STp->raw) - return 1; - - if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) { - if (osst_set_frame_position(STp, aSRpnt, ppos, 0)) - printk(KERN_WARNING "%s:W: Couldn't position tape\n", name); - osst_wait_ready(STp, aSRpnt, 60 * 15, 0); - if (osst_initiate_read (STp, aSRpnt)) { - printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name); - return 0; - } - } - if (osst_read_frame(STp, aSRpnt, 180)) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name); -#endif - return 0; - } - header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */ - aux = STp->buffer->aux; - if (aux->frame_type != OS_FRAME_TYPE_HEADER) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos); -#endif - return 0; - } - if (ntohl(aux->frame_seq_num) != 0 || - ntohl(aux->logical_blk_num) != 0 || - aux->partition.partition_num != OS_CONFIG_PARTITION || - ntohl(aux->partition.first_frame_ppos) != 0 || - ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name, - ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), - aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos), - ntohl(aux->partition.last_frame_ppos)); -#endif - return 0; - } - if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 && - strncmp(header->ident_str, "ADR-SEQ", 7) != 0) { - strlcpy(id_string, header->ident_str, 8); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string); -#endif - return 0; - } - update_frame_cntr = ntohl(aux->update_frame_cntr); - if (update_frame_cntr < STp->update_frame_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n", - name, ppos, update_frame_cntr, STp->update_frame_cntr); -#endif - return 0; - } - if (header->major_rev != 1 || header->minor_rev != 4 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n", - name, (header->major_rev != 1 || header->minor_rev < 2 || - header->minor_rev > 4 )? "Invalid" : "Warning:", - header->major_rev, header->minor_rev); -#endif - if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4) - return 0; - } -#if DEBUG - if (header->pt_par_num != 1) - printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n", - name, header->pt_par_num); -#endif - memcpy(id_string, aux->application_sig, 4); - id_string[4] = 0; - if (memcmp(id_string, "LIN", 3) == 0) { - STp->linux_media = 1; - linux_media_version = id_string[3] - '0'; - if (linux_media_version != 4) - printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n", - name, linux_media_version); - } else { - printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string); - return 0; - } - if (linux_media_version < STp->linux_media_version) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n", - name, ppos, linux_media_version); -#endif - return 0; - } - if (linux_media_version > STp->linux_media_version) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n", - name, ppos, linux_media_version); -#endif - memcpy(STp->application_sig, id_string, 5); - STp->linux_media_version = linux_media_version; - STp->update_frame_cntr = -1; - } - if (update_frame_cntr > STp->update_frame_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n", - name, ppos, update_frame_cntr); -#endif - if (STp->header_cache == NULL) { - if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { - printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); - return 0; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name); -#endif - } - osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache); - header = STp->header_cache; /* further accesses from cached (full) copy */ - - STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr); - STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos); - STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos); - STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb); - STp->filemark_cnt = ntohl(aux->filemark_cnt); - STp->first_mark_ppos = ntohl(aux->next_mark_ppos); - STp->last_mark_ppos = ntohl(aux->last_mark_ppos); - STp->last_mark_lbn = ntohl(aux->last_mark_lbn); - STp->update_frame_cntr = update_frame_cntr; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n", - name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt); - printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name, - STp->first_data_ppos, - ntohl(header->partition[0].last_frame_ppos), - ntohl(header->partition[0].eod_frame_ppos)); - printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n", - name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos); -#endif - if (header->minor_rev < 4 && STp->linux_media_version == 4) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name); -#endif - memcpy((void *)header->dat_fm_tab.fm_tab_ent, - (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent)); - memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list)); - } - if (header->minor_rev == 4 && - (header->ext_trk_tb_off != htons(17192) || - header->partition[0].partition_num != OS_DATA_PARTITION || - header->partition[0].par_desc_ver != OS_PARTITION_VERSION || - header->partition[0].last_frame_ppos != htonl(STp->capacity) || - header->cfg_col_width != htonl(20) || - header->dat_col_width != htonl(1500) || - header->qfa_col_width != htonl(0) || - header->ext_track_tb.nr_stream_part != 1 || - header->ext_track_tb.et_ent_sz != 32 || - header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION || - header->ext_track_tb.dat_ext_trk_ey.fmt != 1 || - header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) || - header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 || - header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) || - header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION || - header->dat_fm_tab.fm_tab_ent_sz != 4 || - header->dat_fm_tab.fm_tab_ent_cnt != - htons(STp->filemark_cntfilemark_cnt:OS_FM_TAB_MAX))) - printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name); - - } - - return 1; -} - -static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int position, ppos; - int first, last; - int valid = 0; - char * name = tape_name(STp); - - position = osst_get_frame_position(STp, aSRpnt); - - if (STp->raw) { - STp->header_ok = STp->linux_media = 1; - STp->linux_media_version = 0; - return 1; - } - STp->header_ok = STp->linux_media = STp->linux_media_version = 0; - STp->wrt_pass_cntr = STp->update_frame_cntr = -1; - STp->eod_frame_ppos = STp->first_data_ppos = -1; - STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reading header\n", name); -#endif - - /* optimization for speed - if we are positioned at ppos 10, read second group first */ - /* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */ - - first = position==10?0xbae: 5; - last = position==10?0xbb3:10; - - for (ppos = first; ppos < last; ppos++) - if (__osst_analyze_headers(STp, aSRpnt, ppos)) - valid = 1; - - first = position==10? 5:0xbae; - last = position==10?10:0xbb3; - - for (ppos = first; ppos < last; ppos++) - if (__osst_analyze_headers(STp, aSRpnt, ppos)) - valid = 1; - - if (!valid) { - printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name); - STp->eod_frame_ppos = STp->first_data_ppos = 0; - osst_set_frame_position(STp, aSRpnt, 10, 0); - return 0; - } - if (position <= STp->first_data_ppos) { - position = STp->first_data_ppos; - STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; - } - osst_set_frame_position(STp, aSRpnt, position, 0); - STp->header_ok = 1; - - return 1; -} - -static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int frame_position = STp->first_frame_position; - int frame_seq_numbr = STp->frame_seq_number; - int logical_blk_num = STp->logical_blk_num; - int halfway_frame = STp->frame_in_buffer; - int read_pointer = STp->buffer->read_pointer; - int prev_mark_ppos = -1; - int actual_mark_ppos, i, n; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name); -#endif - osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name); -#endif - return (-EIO); - } - if (STp->linux_media_version >= 4) { - for (i=0; ifilemark_cnt; i++) - if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position) - prev_mark_ppos = n; - } else - prev_mark_ppos = frame_position - 1; /* usually - we don't really know */ - actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ? - frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos); - if (frame_position != STp->first_frame_position || - frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) || - prev_mark_ppos != actual_mark_ppos ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name, - STp->first_frame_position, frame_position, - STp->frame_seq_number + (halfway_frame?0:1), - frame_seq_numbr, actual_mark_ppos, prev_mark_ppos); -#endif - return (-EIO); - } - if (halfway_frame) { - /* prepare buffer for append and rewrite on top of original */ - osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); - STp->buffer->buffer_bytes = read_pointer; - STp->ps[STp->partition].rw = ST_WRITING; - STp->dirty = 1; - } - STp->frame_in_buffer = halfway_frame; - STp->frame_seq_number = frame_seq_numbr; - STp->logical_blk_num = logical_blk_num; - return 0; -} - -/* Acc. to OnStream, the vers. numbering is the following: - * X.XX for released versions (X=digit), - * XXXY for unreleased versions (Y=letter) - * Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06 - * This fn makes monoton numbers out of this scheme ... - */ -static unsigned int osst_parse_firmware_rev (const char * str) -{ - if (str[1] == '.') { - return (str[0]-'0')*10000 - +(str[2]-'0')*1000 - +(str[3]-'0')*100; - } else { - return (str[0]-'0')*10000 - +(str[1]-'0')*1000 - +(str[2]-'0')*100 - 100 - +(str[3]-'@'); - } -} - -/* - * Configure the OnStream SCII tape drive for default operation - */ -static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - char * name = tape_name(STp); - struct osst_request * SRpnt = * aSRpnt; - osst_mode_parameter_header_t * header; - osst_block_size_page_t * bs; - osst_capabilities_page_t * cp; - osst_tape_paramtr_page_t * prm; - int drive_buffer_size; - - if (STp->ready != ST_READY) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Not Ready\n", name); -#endif - return (-EIO); - } - - if (STp->os_fw_rev < 10600) { - printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev); - printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name); - } - - /* - * Configure 32.5KB (data+aux) frame size. - * Get the current frame size from the block size mode page - */ - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = BLOCK_SIZE_PAGE; - cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - if (SRpnt == NULL) { -#if DEBUG - printk(OSST_DEB_MSG "osst :D: Busy\n"); -#endif - return (-EBUSY); - } - *aSRpnt = SRpnt; - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n", name, bs->play32 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n", name, bs->record32 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n", name, bs->record32_5 ? "Yes" : "No"); -#endif - - /* - * Configure default auto columns mode, 32.5KB transfer mode - */ - bs->one = 1; - bs->play32 = 0; - bs->play32_5 = 1; - bs->record32 = 0; - bs->record32_5 = 1; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name); - return (-EIO); - } - -#if DEBUG - printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name); - /* - * In debug mode, we want to see as many errors as possible - * to test the error recovery mechanism. - */ - osst_set_retries(STp, aSRpnt, 0); - SRpnt = * aSRpnt; -#endif - - /* - * Set vendor name to 'LIN4' for "Linux support version 4". - */ - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; - - header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1; - header->medium_type = 0; /* Medium Type - ignoring */ - header->dsp = 0; /* Reserved */ - header->bdl = 0; /* Block Descriptor Length */ - - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7); - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name, - (char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2)); - return (-EIO); - } - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = CAPABILITIES_PAGE; - cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get capabilities page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data + - sizeof(osst_mode_parameter_header_t) + header->bdl); - - drive_buffer_size = ntohs(cp->buffer_size) / 2; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = TAPE_PARAMTR_PAGE; - cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data + - sizeof(osst_mode_parameter_header_t) + header->bdl); - - STp->density = prm->density; - STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n", - name, STp->density, STp->capacity / 32, drive_buffer_size); -#endif - - return 0; - -} - - -/* Step over EOF if it has been inadvertently crossed (ioctl not used because - it messes up the block number). */ -static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward) -{ - int result; - char * name = tape_name(STp); - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n", - name, forward ? "forward" : "backward"); -#endif - - if (forward) { - /* assumes that the filemark is already read by the drive, so this is low cost */ - result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1); - } - else - /* assumes this is only called if we just read the filemark! */ - result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1); - - if (result < 0) - printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n", - name, forward ? "forward" : "backward"); - - return result; -} - - -/* Get the tape position. */ - -static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - unsigned char scmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int result = 0; - char * name = tape_name(STp); - - /* KG: We want to be able to use it for checking Write Buffer availability - * and thus don't want to risk to overwrite anything. Exchange buffers ... */ - char mybuf[24]; - char * olddata = STp->buffer->b_data; - int oldsize = STp->buffer->buffer_size; - - if (STp->ready != ST_READY) return (-EIO); - - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = READ_POSITION; - - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - if (!SRpnt) { - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - return (-EBUSY); - } - *aSRpnt = SRpnt; - - if (STp->buffer->syscall_result) - result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL; /* 3: Write Error */ - - if (result == -EINVAL) - printk(KERN_ERR "%s:E: Can't read tape position.\n", name); - else { - if (result == -EIO) { /* re-read position - this needs to preserve media errors */ - unsigned char mysense[16]; - memcpy (mysense, SRpnt->sense, 16); - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = READ_POSITION; - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n", - name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:", - SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]); -#endif - if (!STp->buffer->syscall_result) - memcpy (SRpnt->sense, mysense, 16); - else - printk(KERN_WARNING "%s:W: Double error in get position\n", name); - } - STp->first_frame_position = ((STp->buffer)->b_data[4] << 24) - + ((STp->buffer)->b_data[5] << 16) - + ((STp->buffer)->b_data[6] << 8) - + (STp->buffer)->b_data[7]; - STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24) - + ((STp->buffer)->b_data[ 9] << 16) - + ((STp->buffer)->b_data[10] << 8) - + (STp->buffer)->b_data[11]; - STp->cur_frames = (STp->buffer)->b_data[15]; -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name, - STp->first_frame_position, STp->last_frame_position, - ((STp->buffer)->b_data[0]&0x80)?" (BOP)": - ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"", - STp->cur_frames); - } -#endif - if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name, - STp->first_frame_position, STp->last_frame_position, STp->cur_frames); -#endif - STp->first_frame_position = STp->last_frame_position; - } - } - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - - return (result == 0 ? STp->first_frame_position : result); -} - - -/* Set the tape block */ -static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip) -{ - unsigned char scmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - struct st_partstat * STps; - int result = 0; - int pp = (ppos == 3000 && !skip)? 0 : ppos; - char * name = tape_name(STp); - - if (STp->ready != ST_READY) return (-EIO); - - STps = &(STp->ps[STp->partition]); - - if (ppos < 0 || ppos > STp->capacity) { - printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos); - pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1); - result = (-EINVAL); - } - - do { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp); -#endif - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = SEEK_10; - scmd[1] = 1; - scmd[3] = (pp >> 24); - scmd[4] = (pp >> 16); - scmd[5] = (pp >> 8); - scmd[6] = pp; - if (skip) - scmd[9] = 0x80; - - SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout, - MAX_RETRIES, 1); - if (!SRpnt) - return (-EBUSY); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n", - name, STp->first_frame_position, pp); -#endif - result = (-EIO); - } - if (pp != ppos) - osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); - } while ((pp != ppos) && (pp = ppos)); - STp->first_frame_position = STp->last_frame_position = ppos; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->rw = ST_IDLE; - STp->frame_in_buffer = 0; - return result; -} - -static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - int result = 0; - - if (STp->write_type != OS_WRITE_NEW_MARK) { - /* true unless the user wrote the filemark for us */ - result = osst_flush_drive_buffer(STp, aSRpnt); - if (result < 0) goto out; - result = osst_write_filemark(STp, aSRpnt); - if (result < 0) goto out; - - if (STps->drv_file >= 0) - STps->drv_file++ ; - STps->drv_block = 0; - } - result = osst_write_eod(STp, aSRpnt); - osst_write_header(STp, aSRpnt, leave_at_EOT); - - STps->eof = ST_FM; -out: - return result; -} - -/* osst versions of st functions - augmented and stripped to suit OnStream only */ - -/* Flush the write buffer (never need to write if variable blocksize). */ -static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - int offset, transfer, blks = 0; - int result = 0; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = *aSRpnt; - struct st_partstat * STps; - char * name = tape_name(STp); - - if ((STp->buffer)->writing) { - if (SRpnt == (STp->buffer)->last_SRpnt) -#if DEBUG - { printk(OSST_DEB_MSG - "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name); -#endif - *aSRpnt = SRpnt = NULL; -#if DEBUG - } else if (SRpnt) - printk(OSST_DEB_MSG - "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name); -#endif - osst_write_behind_check(STp); - if ((STp->buffer)->syscall_result) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n", - name, (STp->buffer)->midlevel_result); -#endif - if ((STp->buffer)->midlevel_result == INT_MAX) - return (-ENOSPC); - return (-EIO); - } - } - - result = 0; - if (STp->dirty == 1) { - - STp->write_count++; - STps = &(STp->ps[STp->partition]); - STps->rw = ST_WRITING; - offset = STp->buffer->buffer_bytes; - blks = (offset + STp->block_size - 1) / STp->block_size; - transfer = OS_FRAME_SIZE; - - if (offset < OS_DATA_SIZE) - osst_zero_buffer_tail(STp->buffer); - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120)) - result = osst_recover_wait_frame(STp, aSRpnt, 1); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; - - switch (STp->write_type) { - case OS_WRITE_DATA: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", - name, blks, STp->frame_seq_number, - STp->logical_blk_num - blks, STp->logical_blk_num - 1); -#endif - osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, - STp->logical_blk_num - blks, STp->block_size, blks); - break; - case OS_WRITE_EOD: - osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++, - STp->logical_blk_num, 0, 0); - break; - case OS_WRITE_NEW_MARK: - osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++, - STp->logical_blk_num++, 0, blks=1); - break; - case OS_WRITE_HEADER: - osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0); - break; - default: /* probably FILLER */ - osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0); - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n", - name, offset, transfer, blks); -#endif - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) - return (-EBUSY); - - if ((STp->buffer)->syscall_result != 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n", - name, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */ - (SRpnt->sense[2] & 0x0f) == NO_SENSE) { - STp->dirty = 0; - (STp->buffer)->buffer_bytes = 0; - result = (-ENOSPC); - } - else { - if (osst_write_error_recovery(STp, aSRpnt, 1)) { - printk(KERN_ERR "%s:E: Error on flush write.\n", name); - result = (-EIO); - } - } - STps->drv_block = (-1); /* FIXME - even if write recovery succeeds? */ - } - else { - STp->first_frame_position++; - STp->dirty = 0; - (STp->buffer)->buffer_bytes = 0; - } - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result); -#endif - return result; -} - - -/* Flush the tape buffer. The tape will be positioned correctly unless - seek_next is true. */ -static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next) -{ - struct st_partstat * STps; - int backspace = 0, result = 0; -#if DEBUG - char * name = tape_name(STp); -#endif - - /* - * If there was a bus reset, block further access - * to this device. - */ - if( STp->pos_unknown) - return (-EIO); - - if (STp->ready != ST_READY) - return 0; - - STps = &(STp->ps[STp->partition]); - if (STps->rw == ST_WRITING || STp->dirty) { /* Writing */ - STp->write_type = OS_WRITE_DATA; - return osst_flush_write_buffer(STp, aSRpnt); - } - if (STp->block_size == 0) - return 0; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name); -#endif - - if (!STp->can_bsr) { - backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size - - ((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ; - (STp->buffer)->buffer_bytes = 0; - (STp->buffer)->read_pointer = 0; - STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */ - } - - if (!seek_next) { - if (STps->eof == ST_FM_HIT) { - result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */ - if (!result) - STps->eof = ST_NOEOF; - else { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - } - } - if (!result && backspace > 0) /* TODO -- design and run a test case for this */ - result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace); - } - else if (STps->eof == ST_FM_HIT) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_NOEOF; - } - - return result; -} - -static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int blks; -#if DEBUG - char * name = tape_name(STp); -#endif - - if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name); -#endif - if (osst_flush_drive_buffer(STp, aSRpnt) < 0) { - return (-EIO); - } - /* error recovery may have bumped us past the header partition */ - if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8); - } - } - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120)) - if (osst_recover_wait_frame(STp, aSRpnt, 1)) - return (-EIO); - -// osst_build_stats(STp, &SRpnt); - - STp->ps[STp->partition].rw = ST_WRITING; - STp->write_type = OS_WRITE_DATA; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; /* one frame at a time... */ - blks = STp->buffer->buffer_bytes / STp->block_size; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks, - STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1); -#endif - osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, - STp->logical_blk_num - blks, STp->block_size, blks); - -#if DEBUG - if (!synchronous) - STp->write_pending = 1; -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout, - MAX_RETRIES, synchronous); - if (!SRpnt) - return (-EBUSY); - *aSRpnt = SRpnt; - - if (synchronous) { - if (STp->buffer->syscall_result != 0) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Error on write:\n", name); -#endif - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x40)) { - if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW) - return (-ENOSPC); - } - else { - if (osst_write_error_recovery(STp, aSRpnt, 1)) - return (-EIO); - } - } - else - STp->first_frame_position++; - } - - STp->write_count++; - - return 0; -} - -/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */ -static int do_door_lock(struct osst_tape * STp, int do_lock) -{ - int retval; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl"); -#endif - - retval = scsi_set_medium_removal(STp->device, - do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); - if (!retval) - STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED; - else - STp->door_locked = ST_LOCK_FAILS; - return retval; -} - -/* Set the internal state after reset */ -static void reset_state(struct osst_tape *STp) -{ - int i; - struct st_partstat *STps; - - STp->pos_unknown = 0; - for (i = 0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = -1; - STps->drv_file = -1; - } -} - - -/* Entry points to osst */ - -/* Write command */ -static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos) -{ - ssize_t total, retval = 0; - ssize_t i, do_count, blks, transfer; - int write_threshold; - int doing_write = 0; - const char __user * b_point; - struct osst_request * SRpnt = NULL; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_tape * STp = filp->private_data; - char * name = tape_name(STp); - - - if (mutex_lock_interruptible(&STp->lock)) - return (-ERESTARTSYS); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - if( !scsi_block_when_processing_errors(STp->device) ) { - retval = (-ENXIO); - goto out; - } - - if (STp->ready != ST_READY) { - if (STp->ready == ST_NO_TAPE) - retval = (-ENOMEDIUM); - else - retval = (-EIO); - goto out; - } - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } - if (count == 0) - goto out; - - /* - * If there was a bus reset, block further access - * to this device. - */ - if (STp->pos_unknown) { - retval = (-EIO); - goto out; - } - -#if DEBUG - if (!STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - - if (STp->write_prot) { - retval = (-EACCES); - goto out; - } - - /* Write must be integral number of blocks */ - if (STp->block_size != 0 && (count % STp->block_size) != 0) { - printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n", - name, count, STp->block_size<1024? - STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); - retval = (-EINVAL); - goto out; - } - - if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) { - printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n", - name, STp->first_frame_position); - retval = (-ENOSPC); - goto out; - } - - if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) - STp->door_locked = ST_LOCKED_AUTO; - - STps = &(STp->ps[STp->partition]); - - if (STps->rw == ST_READING) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name, - STps->drv_file, STps->drv_block); -#endif - retval = osst_flush_buffer(STp, &SRpnt, 0); - if (retval) - goto out; - STps->rw = ST_IDLE; - } - if (STps->rw != ST_WRITING) { - /* Are we totally rewriting this tape? */ - if (!STp->header_ok || - (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) || - (STps->drv_file == 0 && STps->drv_block == 0)) { - STp->wrt_pass_cntr++; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n", - name, STp->wrt_pass_cntr); -#endif - osst_reset_header(STp, &SRpnt); - STps->drv_file = STps->drv_block = 0; - } - /* Do we know where we'll be writing on the tape? */ - else { - if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) || - STps->drv_file < 0 || STps->drv_block < 0) { - if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */ - STps->drv_file = STp->filemark_cnt; - STps->drv_block = 0; - } - else { - /* We have no idea where the tape is positioned - give up */ -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Cannot write at indeterminate position.\n", name); -#endif - retval = (-EIO); - goto out; - } - } - if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) { - STp->filemark_cnt = STps->drv_file; - STp->last_mark_ppos = - ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]); - printk(KERN_WARNING - "%s:W: Overwriting file %d with old write pass counter %d\n", - name, STps->drv_file, STp->wrt_pass_cntr); - printk(KERN_WARNING - "%s:W: may lead to stale data being accepted on reading back!\n", - name); -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n", - name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn); -#endif - } - } - STp->fast_open = 0; - } - if (!STp->header_ok) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name); -#endif - retval = (-EIO); - goto out; - } - - if ((STp->buffer)->writing) { -if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__); - osst_write_behind_check(STp); - if ((STp->buffer)->syscall_result) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name, - (STp->buffer)->midlevel_result); -#endif - if ((STp->buffer)->midlevel_result == INT_MAX) - STps->eof = ST_EOM_OK; - else - STps->eof = ST_EOM_ERROR; - } - } - if (STps->eof == ST_EOM_OK) { - retval = (-ENOSPC); - goto out; - } - else if (STps->eof == ST_EOM_ERROR) { - retval = (-EIO); - goto out; - } - - /* Check the buffer readability in cases where copy_user might catch - the problems after some tape movement. */ - if ((copy_from_user(&i, buf, 1) != 0 || - copy_from_user(&i, buf + count - 1, 1) != 0)) { - retval = (-EFAULT); - goto out; - } - - if (!STm->do_buffer_writes) { - write_threshold = 1; - } - else - write_threshold = (STp->buffer)->buffer_blocks * STp->block_size; - if (!STm->do_async_writes) - write_threshold--; - - total = count; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n", - name, (int) count, STps->drv_file, STps->drv_block, - STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position); -#endif - b_point = buf; - while ((STp->buffer)->buffer_bytes + count > write_threshold) - { - doing_write = 1; - do_count = (STp->buffer)->buffer_blocks * STp->block_size - - (STp->buffer)->buffer_bytes; - if (do_count > count) - do_count = count; - - i = append_to_buffer(b_point, STp->buffer, do_count); - if (i) { - retval = i; - goto out; - } - - blks = do_count / STp->block_size; - STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */ - - i = osst_write_frame(STp, &SRpnt, 1); - - if (i == (-ENOSPC)) { - transfer = STp->buffer->writing; /* FIXME -- check this logic */ - if (transfer <= do_count) { - *ppos += do_count - transfer; - count -= do_count - transfer; - if (STps->drv_block >= 0) { - STps->drv_block += (do_count - transfer) / STp->block_size; - } - STps->eof = ST_EOM_OK; - retval = (-ENOSPC); /* EOM within current request */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n", - name, (int) transfer); -#endif - } - else { - STps->eof = ST_EOM_ERROR; - STps->drv_block = (-1); /* Too cautious? */ - retval = (-EIO); /* EOM for old data */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name); -#endif - } - } - else - retval = i; - - if (retval < 0) { - if (SRpnt != NULL) { - osst_release_request(SRpnt); - SRpnt = NULL; - } - STp->buffer->buffer_bytes = 0; - STp->dirty = 0; - if (count < total) - retval = total - count; - goto out; - } - - *ppos += do_count; - b_point += do_count; - count -= do_count; - if (STps->drv_block >= 0) { - STps->drv_block += blks; - } - STp->buffer->buffer_bytes = 0; - STp->dirty = 0; - } /* end while write threshold exceeded */ - - if (count != 0) { - STp->dirty = 1; - i = append_to_buffer(b_point, STp->buffer, count); - if (i) { - retval = i; - goto out; - } - blks = count / STp->block_size; - STp->logical_blk_num += blks; - if (STps->drv_block >= 0) { - STps->drv_block += blks; - } - *ppos += count; - count = 0; - } - - if (doing_write && (STp->buffer)->syscall_result != 0) { - retval = (STp->buffer)->syscall_result; - goto out; - } - - if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) { - /* Schedule an asynchronous write */ - (STp->buffer)->writing = ((STp->buffer)->buffer_bytes / - STp->block_size) * STp->block_size; - STp->dirty = !((STp->buffer)->writing == - (STp->buffer)->buffer_bytes); - - i = osst_write_frame(STp, &SRpnt, 0); - if (i < 0) { - retval = (-EIO); - goto out; - } - SRpnt = NULL; /* Prevent releasing this request! */ - } - STps->at_sm &= (total == 0); - if (total > 0) - STps->eof = ST_NOEOF; - - retval = total; - -out: - if (SRpnt != NULL) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - return retval; -} - - -/* Read command */ -static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos) -{ - ssize_t total, retval = 0; - ssize_t i, transfer; - int special; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp = filp->private_data; - char * name = tape_name(STp); - - - if (mutex_lock_interruptible(&STp->lock)) - return (-ERESTARTSYS); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - if( !scsi_block_when_processing_errors(STp->device) ) { - retval = (-ENXIO); - goto out; - } - - if (STp->ready != ST_READY) { - if (STp->ready == ST_NO_TAPE) - retval = (-ENOMEDIUM); - else - retval = (-EIO); - goto out; - } - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } -#if DEBUG - if (!STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - /* Must have initialized medium */ - if (!STp->header_ok) { - retval = (-EIO); - goto out; - } - - if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) - STp->door_locked = ST_LOCKED_AUTO; - - STps = &(STp->ps[STp->partition]); - if (STps->rw == ST_WRITING) { - retval = osst_flush_buffer(STp, &SRpnt, 0); - if (retval) - goto out; - STps->rw = ST_IDLE; - /* FIXME -- this may leave the tape without EOD and up2date headers */ - } - - if ((count % STp->block_size) != 0) { - printk(KERN_WARNING - "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count, - STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); - } - -#if DEBUG - if (debugging && STps->eof != ST_NOEOF) - printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name, - STps->eof, (STp->buffer)->buffer_bytes); -#endif - if ((STp->buffer)->buffer_bytes == 0 && - STps->eof >= ST_EOD_1) { - if (STps->eof < ST_EOD) { - STps->eof += 1; - retval = 0; - goto out; - } - retval = (-EIO); /* EOM or Blank Check */ - goto out; - } - - /* Check the buffer writability before any tape movement. Don't alter - buffer data. */ - if (copy_from_user(&i, buf, 1) != 0 || - copy_to_user (buf, &i, 1) != 0 || - copy_from_user(&i, buf + count - 1, 1) != 0 || - copy_to_user (buf + count - 1, &i, 1) != 0) { - retval = (-EFAULT); - goto out; - } - - /* Loop until enough data in buffer or a special condition found */ - for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) { - - /* Get new data if the buffer is empty */ - if ((STp->buffer)->buffer_bytes == 0) { - if (STps->eof == ST_FM_HIT) - break; - special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0); - if (special < 0) { /* No need to continue read */ - STp->frame_in_buffer = 0; - retval = special; - goto out; - } - } - - /* Move the data from driver buffer to user buffer */ - if ((STp->buffer)->buffer_bytes > 0) { -#if DEBUG - if (debugging && STps->eof != ST_NOEOF) - printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name, - STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total)); -#endif - /* force multiple of block size, note block_size may have been adjusted */ - transfer = (((STp->buffer)->buffer_bytes < count - total ? - (STp->buffer)->buffer_bytes : count - total)/ - STp->block_size) * STp->block_size; - - if (transfer == 0) { - printk(KERN_WARNING - "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n", - name, count, STp->block_size < 1024? - STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); - break; - } - i = from_buffer(STp->buffer, buf, transfer); - if (i) { - retval = i; - goto out; - } - STp->logical_blk_num += transfer / STp->block_size; - STps->drv_block += transfer / STp->block_size; - *ppos += transfer; - buf += transfer; - total += transfer; - } - - if ((STp->buffer)->buffer_bytes == 0) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n", - name, STp->frame_seq_number); -#endif - STp->frame_in_buffer = 0; - STp->frame_seq_number++; /* frame to look for next time */ - } - } /* for (total = 0, special = 0; total < count && !special; ) */ - - /* Change the eof state if no data from tape or buffer */ - if (total == 0) { - if (STps->eof == ST_FM_HIT) { - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM; - STps->drv_block = 0; - if (STps->drv_file >= 0) - STps->drv_file++; - } - else if (STps->eof == ST_EOD_1) { - STps->eof = ST_EOD_2; - if (STps->drv_block > 0 && STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - } - else if (STps->eof == ST_EOD_2) - STps->eof = ST_EOD; - } - else if (STps->eof == ST_FM) - STps->eof = ST_NOEOF; - - retval = total; - -out: - if (SRpnt != NULL) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - return retval; -} - - -/* Set the driver options */ -static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name) -{ - printk(KERN_INFO -"%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n", - name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes, - STm->do_read_ahead); - printk(KERN_INFO -"%s:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n", - name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock); - printk(KERN_INFO -"%s:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n", - name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, - STp->scsi2_logical); - printk(KERN_INFO -"%s:I: sysv: %d\n", name, STm->sysv); -#if DEBUG - printk(KERN_INFO - "%s:D: debugging: %d\n", - name, debugging); -#endif -} - - -static int osst_set_options(struct osst_tape *STp, long options) -{ - int value; - long code; - struct st_modedef * STm; - char * name = tape_name(STp); - - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - memcpy(STm, &(STp->modes[0]), sizeof(*STm)); - modes_defined = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n", - name, STp->current_mode); -#endif - } - - code = options & MT_ST_OPTIONS; - if (code == MT_ST_BOOLEANS) { - STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; - STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0; - STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; - STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0; - STp->two_fm = (options & MT_ST_TWO_FM) != 0; - STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0; - STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0; - STp->can_bsr = (options & MT_ST_CAN_BSR) != 0; - STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0; - if ((STp->device)->scsi_level >= SCSI_2) - STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; - STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; - STm->sysv = (options & MT_ST_SYSV) != 0; -#if DEBUG - debugging = (options & MT_ST_DEBUGGING) != 0; -#endif - osst_log_options(STp, STm, name); - } - else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { - value = (code == MT_ST_SETBOOLEANS); - if ((options & MT_ST_BUFFER_WRITES) != 0) - STm->do_buffer_writes = value; - if ((options & MT_ST_ASYNC_WRITES) != 0) - STm->do_async_writes = value; - if ((options & MT_ST_DEF_WRITES) != 0) - STm->defaults_for_writes = value; - if ((options & MT_ST_READ_AHEAD) != 0) - STm->do_read_ahead = value; - if ((options & MT_ST_TWO_FM) != 0) - STp->two_fm = value; - if ((options & MT_ST_FAST_MTEOM) != 0) - STp->fast_mteom = value; - if ((options & MT_ST_AUTO_LOCK) != 0) - STp->do_auto_lock = value; - if ((options & MT_ST_CAN_BSR) != 0) - STp->can_bsr = value; - if ((options & MT_ST_NO_BLKLIMS) != 0) - STp->omit_blklims = value; - if ((STp->device)->scsi_level >= SCSI_2 && - (options & MT_ST_CAN_PARTITIONS) != 0) - STp->can_partitions = value; - if ((options & MT_ST_SCSI2LOGICAL) != 0) - STp->scsi2_logical = value; - if ((options & MT_ST_SYSV) != 0) - STm->sysv = value; -#if DEBUG - if ((options & MT_ST_DEBUGGING) != 0) - debugging = value; -#endif - osst_log_options(STp, STm, name); - } - else if (code == MT_ST_WRITE_THRESHOLD) { - value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE; - if (value < 1 || value > osst_buffer_size) { - printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n", - name, value); - return (-EIO); - } - STp->write_threshold = value; - printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n", - name, value); - } - else if (code == MT_ST_DEF_BLKSIZE) { - value = (options & ~MT_ST_OPTIONS); - if (value == ~MT_ST_OPTIONS) { - STm->default_blksize = (-1); - printk(KERN_INFO "%s:I: Default block size disabled.\n", name); - } - else { - if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) { - printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n", - name, value); - return (-EINVAL); - } - STm->default_blksize = value; - printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n", - name, STm->default_blksize); - } - } - else if (code == MT_ST_TIMEOUTS) { - value = (options & ~MT_ST_OPTIONS); - if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { - STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; - printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name, - (value & ~MT_ST_SET_LONG_TIMEOUT)); - } - else { - STp->timeout = value * HZ; - printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value); - } - } - else if (code == MT_ST_DEF_OPTIONS) { - code = (options & ~MT_ST_CLEAR_DEFAULT); - value = (options & MT_ST_CLEAR_DEFAULT); - if (code == MT_ST_DEF_DENSITY) { - if (value == MT_ST_CLEAR_DEFAULT) { - STm->default_density = (-1); - printk(KERN_INFO "%s:I: Density default disabled.\n", name); - } - else { - STm->default_density = value & 0xff; - printk(KERN_INFO "%s:I: Density default set to %x\n", - name, STm->default_density); - } - } - else if (code == MT_ST_DEF_DRVBUFFER) { - if (value == MT_ST_CLEAR_DEFAULT) { - STp->default_drvbuffer = 0xff; - printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name); - } - else { - STp->default_drvbuffer = value & 7; - printk(KERN_INFO "%s:I: Drive buffer default set to %x\n", - name, STp->default_drvbuffer); - } - } - else if (code == MT_ST_DEF_COMPRESSION) { - if (value == MT_ST_CLEAR_DEFAULT) { - STm->default_compression = ST_DONT_TOUCH; - printk(KERN_INFO "%s:I: Compression default disabled.\n", name); - } - else { - STm->default_compression = (value & 1 ? ST_YES : ST_NO); - printk(KERN_INFO "%s:I: Compression default set to %x\n", - name, (value & 1)); - } - } - } - else - return (-EIO); - - return 0; -} - - -/* Internal ioctl function */ -static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int cmd_in, unsigned long arg) -{ - int timeout; - long ltmp; - int i, ioctl_result; - int chg_eof = 1; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = * aSRpnt; - struct st_partstat * STps; - int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num; - int datalen = 0, direction = DMA_NONE; - char * name = tape_name(STp); - - if (STp->ready != ST_READY && cmd_in != MTLOAD) { - if (STp->ready == ST_NO_TAPE) - return (-ENOMEDIUM); - else - return (-EIO); - } - timeout = STp->long_timeout; - STps = &(STp->ps[STp->partition]); - fileno = STps->drv_file; - blkno = STps->drv_block; - at_sm = STps->at_sm; - frame_seq_numbr = STp->frame_seq_number; - logical_blk_num = STp->logical_blk_num; - - memset(cmd, 0, MAX_COMMAND_SIZE); - switch (cmd_in) { - case MTFSFM: - chg_eof = 0; /* Changed from the FSF after this */ - /* fall through */ - case MTFSF: - if (STp->raw) - return (-EIO); - if (STp->linux_media) - ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg); - else - ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg); - if (fileno >= 0) - fileno += arg; - blkno = 0; - at_sm &= (arg == 0); - goto os_bypass; - - case MTBSF: - chg_eof = 0; /* Changed from the FSF after this */ - /* fall through */ - case MTBSFM: - if (STp->raw) - return (-EIO); - ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg); - if (fileno >= 0) - fileno -= arg; - blkno = (-1); /* We can't know the block number */ - at_sm &= (arg == 0); - goto os_bypass; - - case MTFSR: - case MTBSR: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n", - name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num); -#endif - if (cmd_in == MTFSR) { - logical_blk_num += arg; - if (blkno >= 0) blkno += arg; - } - else { - logical_blk_num -= arg; - if (blkno >= 0) blkno -= arg; - } - ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num); - fileno = STps->drv_file; - blkno = STps->drv_block; - at_sm &= (arg == 0); - goto os_bypass; - - case MTFSS: - cmd[0] = SPACE; - cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ - cmd[2] = (arg >> 16); - cmd[3] = (arg >> 8); - cmd[4] = arg; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name, - cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); -#endif - if (arg != 0) { - blkno = fileno = (-1); - at_sm = 1; - } - break; - case MTBSS: - cmd[0] = SPACE; - cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ - ltmp = (-arg); - cmd[2] = (ltmp >> 16); - cmd[3] = (ltmp >> 8); - cmd[4] = ltmp; -#if DEBUG - if (debugging) { - if (cmd[2] & 0x80) - ltmp = 0xff000000; - ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; - printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n", - name, (-ltmp)); - } -#endif - if (arg != 0) { - blkno = fileno = (-1); - at_sm = 1; - } - break; - case MTWEOF: - if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { - STp->write_type = OS_WRITE_DATA; - ioctl_result = osst_flush_write_buffer(STp, &SRpnt); - } else - ioctl_result = 0; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg); -#endif - for (i=0; i= 0) fileno += arg; - if (blkno >= 0) blkno = 0; - goto os_bypass; - - case MTWSM: - if (STp->write_prot) - return (-EACCES); - if (!STp->raw) - return 0; - cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */ - if (cmd_in == MTWSM) - cmd[1] = 2; - cmd[2] = (arg >> 16); - cmd[3] = (arg >> 8); - cmd[4] = arg; - timeout = STp->timeout; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name, - cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); -#endif - if (fileno >= 0) - fileno += arg; - blkno = 0; - at_sm = (cmd_in == MTWSM); - break; - case MTOFFL: - case MTLOAD: - case MTUNLOAD: - case MTRETEN: - cmd[0] = START_STOP; - cmd[1] = 1; /* Don't wait for completion */ - if (cmd_in == MTLOAD) { - if (STp->ready == ST_NO_TAPE) - cmd[4] = 4; /* open tray */ - else - cmd[4] = 1; /* load */ - } - if (cmd_in == MTRETEN) - cmd[4] = 3; /* retension then mount */ - if (cmd_in == MTOFFL) - cmd[4] = 4; /* rewind then eject */ - timeout = STp->timeout; -#if DEBUG - if (debugging) { - switch (cmd_in) { - case MTUNLOAD: - printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name); - break; - case MTLOAD: - printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name); - break; - case MTRETEN: - printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name); - break; - case MTOFFL: - printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name); - break; - } - } -#endif - fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; - break; - case MTNOP: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name); -#endif - return 0; /* Should do something ? */ - break; - case MTEOM: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name); -#endif - if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) || - (osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0)) { - ioctl_result = -EIO; - goto os_bypass; - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name); -#endif - ioctl_result = -EIO; - goto os_bypass; - } - ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0); - fileno = STp->filemark_cnt; - blkno = at_sm = 0; - goto os_bypass; - - case MTERASE: - if (STp->write_prot) - return (-EACCES); - ioctl_result = osst_reset_header(STp, &SRpnt); - i = osst_write_eod(STp, &SRpnt); - if (i < ioctl_result) ioctl_result = i; - i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos); - if (i < ioctl_result) ioctl_result = i; - fileno = blkno = at_sm = 0 ; - goto os_bypass; - - case MTREW: - cmd[0] = REZERO_UNIT; /* rewind */ - cmd[1] = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]); -#endif - fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; - break; - - case MTSETBLK: /* Set block length */ - if ((STps->drv_block == 0 ) && - !STp->dirty && - ((STp->buffer)->buffer_bytes == 0) && - ((arg & MT_ST_BLKSIZE_MASK) >= 512 ) && - ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) && - !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK)) ) { - /* - * Only allowed to change the block size if you opened the - * device at the beginning of a file before writing anything. - * Note, that when reading, changing block_size is futile, - * as the size used when writing overrides it. - */ - STp->block_size = (arg & MT_ST_BLKSIZE_MASK); - printk(KERN_INFO "%s:I: Block size set to %d bytes.\n", - name, STp->block_size); - return 0; - } - /* fall through */ - case MTSETDENSITY: /* Set tape density */ - case MTSETDRVBUFFER: /* Set drive buffering */ - case SET_DENS_AND_BLK: /* Set density and block size */ - chg_eof = 0; - if (STp->dirty || (STp->buffer)->buffer_bytes != 0) - return (-EIO); /* Not allowed if data in buffer */ - if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) && - (arg & MT_ST_BLKSIZE_MASK) != 0 && - (arg & MT_ST_BLKSIZE_MASK) != STp->block_size ) { - printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n", - name, (int)(arg & MT_ST_BLKSIZE_MASK), - (OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now"); - return (-EINVAL); - } - return 0; /* FIXME silently ignore if block size didn't change */ - - default: - return (-ENOSYS); - } - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1); - - ioctl_result = (STp->buffer)->syscall_result; - - if (!SRpnt) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name); -#endif - return ioctl_result; - } - - if (!ioctl_result) { /* SCSI command successful */ - STp->frame_seq_number = frame_seq_numbr; - STp->logical_blk_num = logical_blk_num; - } - -os_bypass: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result); -#endif - - if (!ioctl_result) { /* success */ - - if (cmd_in == MTFSFM) { - fileno--; - blkno--; - } - if (cmd_in == MTBSFM) { - fileno++; - blkno++; - } - STps->drv_block = blkno; - STps->drv_file = fileno; - STps->at_sm = at_sm; - - if (cmd_in == MTEOM) - STps->eof = ST_EOD; - else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) { - ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1); - STps->drv_block++; - STp->logical_blk_num++; - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->read_pointer = 0; - } - else if (cmd_in == MTFSF) - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM; - else if (chg_eof) - STps->eof = ST_NOEOF; - - if (cmd_in == MTOFFL || cmd_in == MTUNLOAD) - STp->rew_at_close = 0; - else if (cmd_in == MTLOAD) { - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STp->ps[i].rw = ST_IDLE; - STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */ - } - STp->partition = 0; - } - - if (cmd_in == MTREW) { - ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); - if (ioctl_result > 0) - ioctl_result = 0; - } - - } else if (cmd_in == MTBSF || cmd_in == MTBSFM ) { - if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0) - STps->drv_file = STps->drv_block = -1; - else - STps->drv_file = STps->drv_block = 0; - STps->eof = ST_NOEOF; - } else if (cmd_in == MTFSF || cmd_in == MTFSFM) { - if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) - STps->drv_file = STps->drv_block = -1; - else { - STps->drv_file = STp->filemark_cnt; - STps->drv_block = 0; - } - STps->eof = ST_EOD; - } else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) { - STps->drv_file = STps->drv_block = (-1); - STps->eof = ST_NOEOF; - STp->header_ok = 0; - } else if (cmd_in == MTERASE) { - STp->header_ok = 0; - } else if (SRpnt) { /* SCSI command was not completely successful. */ - if (SRpnt->sense[2] & 0x40) { - STps->eof = ST_EOM_OK; - STps->drv_block = 0; - } - if (chg_eof) - STps->eof = ST_NOEOF; - - if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK) - STps->eof = ST_EOD; - - if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60)) - ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); - } - *aSRpnt = SRpnt; - - return ioctl_result; -} - - -/* Open the device */ -static int __os_scsi_tape_open(struct inode * inode, struct file * filp) -{ - unsigned short flags; - int i, b_size, new_session = 0, retval = 0; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp; - struct st_modedef * STm; - struct st_partstat * STps; - char * name; - int dev = TAPE_NR(inode); - int mode = TAPE_MODE(inode); - - /* - * We really want to do nonseekable_open(inode, filp); here, but some - * versions of tar incorrectly call lseek on tapes and bail out if that - * fails. So we disallow pread() and pwrite(), but permit lseeks. - */ - filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); - - write_lock(&os_scsi_tapes_lock); - if (dev >= osst_max_dev || os_scsi_tapes == NULL || - (STp = os_scsi_tapes[dev]) == NULL || !STp->device) { - write_unlock(&os_scsi_tapes_lock); - return (-ENXIO); - } - - name = tape_name(STp); - - if (STp->in_use) { - write_unlock(&os_scsi_tapes_lock); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name); -#endif - return (-EBUSY); - } - if (scsi_device_get(STp->device)) { - write_unlock(&os_scsi_tapes_lock); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name); -#endif - return (-ENXIO); - } - filp->private_data = STp; - STp->in_use = 1; - write_unlock(&os_scsi_tapes_lock); - STp->rew_at_close = TAPE_REWIND(inode); - - if( !scsi_block_when_processing_errors(STp->device) ) { - return -ENXIO; - } - - if (mode != STp->current_mode) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n", - name, STp->current_mode, mode); -#endif - new_session = 1; - STp->current_mode = mode; - } - STm = &(STp->modes[STp->current_mode]); - - flags = filp->f_flags; - STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY); - - STp->raw = TAPE_IS_RAW(inode); - if (STp->raw) - STp->header_ok = 0; - - /* Allocate data segments for this device's tape buffer */ - if (!enlarge_buffer(STp->buffer, STp->restr_dma)) { - printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name); - retval = (-EOVERFLOW); - goto err_out; - } - if (STp->buffer->buffer_size >= OS_FRAME_SIZE) { - for (i = 0, b_size = 0; - (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE); - b_size += STp->buffer->sg[i++].length); - STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name, - STp->buffer->b_data, page_address(STp->buffer->sg[0].page)); - printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name, - STp->buffer->aux, i, page_address(STp->buffer->sg[i].page)); -#endif - } else { - STp->buffer->aux = NULL; /* this had better never happen! */ - printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE); - retval = (-EIO); - goto err_out; - } - STp->buffer->writing = 0; - STp->buffer->syscall_result = 0; - STp->dirty = 0; - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; - } - STp->ready = ST_READY; -#if DEBUG - STp->nbr_waits = STp->nbr_finished = 0; -#endif - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - if (!SRpnt) { - retval = (STp->buffer)->syscall_result; /* FIXME - valid? */ - goto err_out; - } - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == NOT_READY && - SRpnt->sense[12] == 4 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]); -#endif - if (filp->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto err_out; - } - if (SRpnt->sense[13] == 2) { /* initialize command required (LOAD) */ - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = START_STOP; - cmd[1] = 1; - cmd[4] = 1; - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - } - osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0); - } - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name); -#endif - STp->header_ok = 0; - - for (i=0; i < 10; i++) { - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - if ((SRpnt->sense[0] & 0x70) != 0x70 || - (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION) - break; - } - - STp->pos_unknown = 0; - STp->partition = STp->new_partition = 0; - if (STp->can_partitions) - STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */ - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = 0; - STps->drv_file = 0 ; - } - new_session = 1; - STp->recover_count = 0; - STp->abort_count = 0; - } - /* - * if we have valid headers from before, and the drive/tape seem untouched, - * open without reconfiguring and re-reading the headers - */ - if (!STp->buffer->syscall_result && STp->header_ok && - !SRpnt->result && SRpnt->sense[0] == 0) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = VENDOR_IDENT_PAGE; - cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - - if (STp->buffer->syscall_result || - STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name, - STp->buffer->b_data[MODE_HEADER_LENGTH + 2], - STp->buffer->b_data[MODE_HEADER_LENGTH + 3], - STp->buffer->b_data[MODE_HEADER_LENGTH + 4], - STp->buffer->b_data[MODE_HEADER_LENGTH + 5]); -#endif - STp->header_ok = 0; - } - i = STp->first_frame_position; - if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) { - if (STp->door_locked == ST_UNLOCKED) { - if (do_door_lock(STp, 1)) - printk(KERN_INFO "%s:I: Can't lock drive door\n", name); - else - STp->door_locked = ST_LOCKED_AUTO; - } - if (!STp->frame_in_buffer) { - STp->block_size = (STm->default_blksize > 0) ? - STm->default_blksize : OS_DATA_SIZE; - STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; - } - STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size; - STp->fast_open = 1; - osst_release_request(SRpnt); - return 0; - } -#if DEBUG - if (i != STp->first_frame_position) - printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n", - name, i, STp->first_frame_position); -#endif - STp->header_ok = 0; - } - STp->fast_open = 0; - - if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */ - (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = 4 + MODE_HEADER_LENGTH; - - (STp->buffer)->b_data[0] = cmd[4] - 1; - (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ - (STp->buffer)->b_data[2] = 0; /* Reserved */ - (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name); -#endif - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - - STp->header_ok = 0; - - for (i=0; i < 10; i++) { - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - if ((SRpnt->sense[0] & 0x70) != 0x70 || - (SRpnt->sense[2] & 0x0f) == NOT_READY) - break; - - if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { - int j; - - STp->pos_unknown = 0; - STp->partition = STp->new_partition = 0; - if (STp->can_partitions) - STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (j = 0; j < ST_NBR_PARTITIONS; j++) { - STps = &(STp->ps[j]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = 0; - STps->drv_file = 0 ; - } - new_session = 1; - } - } - } - - if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0)) /* FIXME - not allowed with NOBLOCK */ - printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name); - - if ((STp->buffer)->syscall_result != 0) { - if ((STp->device)->scsi_level >= SCSI_2 && - (SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == NOT_READY && - SRpnt->sense[12] == 0x3a) { /* Check ASC */ - STp->ready = ST_NO_TAPE; - } else - STp->ready = ST_NOT_READY; - osst_release_request(SRpnt); - SRpnt = NULL; - STp->density = 0; /* Clear the erroneous "residue" */ - STp->write_prot = 0; - STp->block_size = 0; - STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); - STp->partition = STp->new_partition = 0; - STp->door_locked = ST_UNLOCKED; - return 0; - } - - osst_configure_onstream(STp, &SRpnt); - - STp->block_size = STp->raw ? OS_FRAME_SIZE : ( - (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE); - STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size; - STp->buffer->buffer_bytes = - STp->buffer->read_pointer = - STp->frame_in_buffer = 0; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n", - name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size, - (STp->buffer)->buffer_blocks); -#endif - - if (STp->drv_write_prot) { - STp->write_prot = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Write protected\n", name); -#endif - if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) { - retval = (-EROFS); - goto err_out; - } - } - - if (new_session) { /* Change the drive parameters for the new mode */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: New Session\n", name); -#endif - STp->density_changed = STp->blksize_changed = 0; - STp->compression_changed = 0; - } - - /* - * properly position the tape and check the ADR headers - */ - if (STp->door_locked == ST_UNLOCKED) { - if (do_door_lock(STp, 1)) - printk(KERN_INFO "%s:I: Can't lock drive door\n", name); - else - STp->door_locked = ST_LOCKED_AUTO; - } - - osst_analyze_headers(STp, &SRpnt); - - osst_release_request(SRpnt); - SRpnt = NULL; - - return 0; - -err_out: - if (SRpnt != NULL) - osst_release_request(SRpnt); - normalize_buffer(STp->buffer); - STp->header_ok = 0; - STp->in_use = 0; - scsi_device_put(STp->device); - - return retval; -} - -/* BKL pushdown: spaghetti avoidance wrapper */ -static int os_scsi_tape_open(struct inode * inode, struct file * filp) -{ - int ret; - - mutex_lock(&osst_int_mutex); - ret = __os_scsi_tape_open(inode, filp); - mutex_unlock(&osst_int_mutex); - return ret; -} - - - -/* Flush the tape buffer before close */ -static int os_scsi_tape_flush(struct file * filp, fl_owner_t id) -{ - int result = 0, result2; - struct osst_tape * STp = filp->private_data; - struct st_modedef * STm = &(STp->modes[STp->current_mode]); - struct st_partstat * STps = &(STp->ps[STp->partition]); - struct osst_request * SRpnt = NULL; - char * name = tape_name(STp); - - if (file_count(filp) > 1) - return 0; - - if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { - STp->write_type = OS_WRITE_DATA; - result = osst_flush_write_buffer(STp, &SRpnt); - if (result != 0 && result != (-ENOSPC)) - goto out; - } - if ( STps->rw >= ST_WRITING && !STp->pos_unknown) { - -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n", - name, (long)(filp->f_pos)); - printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n", - name, STp->nbr_waits, STp->nbr_finished); - } -#endif - result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close)); -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n", - name, 1+STp->two_fm); -#endif - } - else if (!STp->rew_at_close) { - STps = &(STp->ps[STp->partition]); - if (!STm->sysv || STps->rw != ST_READING) { - if (STp->can_bsr) - result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */ - else if (STps->eof == ST_FM_HIT) { - result = cross_eof(STp, &SRpnt, 0); - if (result) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_FM; - } - else - STps->eof = ST_NOEOF; - } - } - else if ((STps->eof == ST_NOEOF && - !(result = cross_eof(STp, &SRpnt, 1))) || - STps->eof == ST_FM_HIT) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_FM; - } - } - -out: - if (STp->rew_at_close) { - result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); - STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; - if (result == 0 && result2 < 0) - result = result2; - } - if (SRpnt) osst_release_request(SRpnt); - - if (STp->abort_count || STp->recover_count) { - printk(KERN_INFO "%s:I:", name); - if (STp->abort_count) - printk(" %d unrecovered errors", STp->abort_count); - if (STp->recover_count) - printk(" %d recovered errors", STp->recover_count); - if (STp->write_count) - printk(" in %d frames written", STp->write_count); - if (STp->read_count) - printk(" in %d frames read", STp->read_count); - printk("\n"); - STp->recover_count = 0; - STp->abort_count = 0; - } - STp->write_count = 0; - STp->read_count = 0; - - return result; -} - - -/* Close the device and release it */ -static int os_scsi_tape_close(struct inode * inode, struct file * filp) -{ - int result = 0; - struct osst_tape * STp = filp->private_data; - - if (STp->door_locked == ST_LOCKED_AUTO) - do_door_lock(STp, 0); - - if (STp->raw) - STp->header_ok = 0; - - normalize_buffer(STp->buffer); - write_lock(&os_scsi_tapes_lock); - STp->in_use = 0; - write_unlock(&os_scsi_tapes_lock); - - scsi_device_put(STp->device); - - return result; -} - - -/* The ioctl command */ -static long osst_ioctl(struct file * file, - unsigned int cmd_in, unsigned long arg) -{ - int i, cmd_nr, cmd_type, blk, retval = 0; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp = file->private_data; - char * name = tape_name(STp); - void __user * p = (void __user *)arg; - - mutex_lock(&osst_int_mutex); - if (mutex_lock_interruptible(&STp->lock)) { - mutex_unlock(&osst_int_mutex); - return -ERESTARTSYS; - } - -#if DEBUG - if (debugging && !STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - STm = &(STp->modes[STp->current_mode]); - STps = &(STp->ps[STp->partition]); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in, - file->f_flags & O_NDELAY); - if (retval) - goto out; - - cmd_type = _IOC_TYPE(cmd_in); - cmd_nr = _IOC_NR(cmd_in); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name, - cmd_type, cmd_nr, STp->raw?"raw":"normal"); -#endif - if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) { - struct mtop mtc; - int auto_weof = 0; - - if (_IOC_SIZE(cmd_in) != sizeof(mtc)) { - retval = (-EINVAL); - goto out; - } - - i = copy_from_user((char *) &mtc, p, sizeof(struct mtop)); - if (i) { - retval = (-EFAULT); - goto out; - } - - if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) { - printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name); - retval = (-EPERM); - goto out; - } - - if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) { - retval = (-ENXIO); - goto out; - } - - if (!STp->pos_unknown) { - - if (STps->eof == ST_FM_HIT) { - if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) { - mtc.mt_count -= 1; - if (STps->drv_file >= 0) - STps->drv_file += 1; - } - else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) { - mtc.mt_count += 1; - if (STps->drv_file >= 0) - STps->drv_file += 1; - } - } - - if (mtc.mt_op == MTSEEK) { - /* Old position must be restored if partition will be changed */ - i = !STp->can_partitions || (STp->new_partition != STp->partition); - } - else { - i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL || - mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM || - mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD || - mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM || - mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM || - mtc.mt_op == MTCOMPRESSION; - } - i = osst_flush_buffer(STp, &SRpnt, i); - if (i < 0) { - retval = i; - goto out; - } - } - else { - /* - * If there was a bus reset, block further access - * to this device. If the user wants to rewind the tape, - * then reset the flag and allow access again. - */ - if(mtc.mt_op != MTREW && - mtc.mt_op != MTOFFL && - mtc.mt_op != MTRETEN && - mtc.mt_op != MTERASE && - mtc.mt_op != MTSEEK && - mtc.mt_op != MTEOM) { - retval = (-EIO); - goto out; - } - reset_state(STp); - /* remove this when the midlevel properly clears was_reset */ - STp->device->was_reset = 0; - } - - if (mtc.mt_op != MTCOMPRESSION && mtc.mt_op != MTLOCK && - mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK && - mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETDRVBUFFER && - mtc.mt_op != MTMKPART && mtc.mt_op != MTSETPART && - mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM ) { - - /* - * The user tells us to move to another position on the tape. - * If we were appending to the tape content, that would leave - * the tape without proper end, in that case write EOD and - * update the header to reflect its position. - */ -#if DEBUG - printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name, - STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle", - STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number, - STp->logical_blk_num, STps->drv_file, STps->drv_block ); -#endif - if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) { - auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) && - !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); - i = osst_write_trailer(STp, &SRpnt, - !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); -#if DEBUG - printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", - name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos, - STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block ); -#endif - if (i < 0) { - retval = i; - goto out; - } - } - STps->rw = ST_IDLE; - } - - if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED) - do_door_lock(STp, 0); /* Ignore result! */ - - if (mtc.mt_op == MTSETDRVBUFFER && - (mtc.mt_count & MT_ST_OPTIONS) != 0) { - retval = osst_set_options(STp, mtc.mt_count); - goto out; - } - - if (mtc.mt_op == MTSETPART) { - if (mtc.mt_count >= STp->nbr_partitions) - retval = -EINVAL; - else { - STp->new_partition = mtc.mt_count; - retval = 0; - } - goto out; - } - - if (mtc.mt_op == MTMKPART) { - if (!STp->can_partitions) { - retval = (-EINVAL); - goto out; - } - if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*|| - (i = partition_tape(inode, mtc.mt_count)) < 0*/) { - retval = i; - goto out; - } - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STp->ps[i].rw = ST_IDLE; - STp->ps[i].at_sm = 0; - STp->ps[i].last_block_valid = 0; - } - STp->partition = STp->new_partition = 0; - STp->nbr_partitions = 1; /* Bad guess ?-) */ - STps->drv_block = STps->drv_file = 0; - retval = 0; - goto out; - } - - if (mtc.mt_op == MTSEEK) { - if (STp->raw) - i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0); - else - i = osst_seek_sector(STp, &SRpnt, mtc.mt_count); - if (!STp->can_partitions) - STp->ps[0].rw = ST_IDLE; - retval = i; - goto out; - } - - if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) { - retval = do_door_lock(STp, (mtc.mt_op == MTLOCK)); - goto out; - } - - if (auto_weof) - cross_eof(STp, &SRpnt, 0); - - if (mtc.mt_op == MTCOMPRESSION) - retval = -EINVAL; /* OnStream drives don't have compression hardware */ - else - /* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS - * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */ - retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count); - goto out; - } - - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } - - if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) { - retval = i; - goto out; - } - - if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) { - struct mtget mt_status; - - if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) { - retval = (-EINVAL); - goto out; - } - - mt_status.mt_type = MT_ISONSTREAM_SC; - mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT; - mt_status.mt_dsreg = - ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) | - ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK); - mt_status.mt_blkno = STps->drv_block; - mt_status.mt_fileno = STps->drv_file; - if (STp->block_size != 0) { - if (STps->rw == ST_WRITING) - mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size; - else if (STps->rw == ST_READING) - mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes + - STp->block_size - 1) / STp->block_size; - } - - mt_status.mt_gstat = 0; - if (STp->drv_write_prot) - mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff); - if (mt_status.mt_blkno == 0) { - if (mt_status.mt_fileno == 0) - mt_status.mt_gstat |= GMT_BOT(0xffffffff); - else - mt_status.mt_gstat |= GMT_EOF(0xffffffff); - } - mt_status.mt_resid = STp->partition; - if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR) - mt_status.mt_gstat |= GMT_EOT(0xffffffff); - else if (STps->eof >= ST_EOM_OK) - mt_status.mt_gstat |= GMT_EOD(0xffffffff); - if (STp->density == 1) - mt_status.mt_gstat |= GMT_D_800(0xffffffff); - else if (STp->density == 2) - mt_status.mt_gstat |= GMT_D_1600(0xffffffff); - else if (STp->density == 3) - mt_status.mt_gstat |= GMT_D_6250(0xffffffff); - if (STp->ready == ST_READY) - mt_status.mt_gstat |= GMT_ONLINE(0xffffffff); - if (STp->ready == ST_NO_TAPE) - mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff); - if (STps->at_sm) - mt_status.mt_gstat |= GMT_SM(0xffffffff); - if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) || - STp->drv_buffer != 0) - mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff); - - i = copy_to_user(p, &mt_status, sizeof(struct mtget)); - if (i) { - retval = (-EFAULT); - goto out; - } - - STp->recover_erreg = 0; /* Clear after read */ - retval = 0; - goto out; - } /* End of MTIOCGET */ - - if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) { - struct mtpos mt_pos; - - if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) { - retval = (-EINVAL); - goto out; - } - if (STp->raw) - blk = osst_get_frame_position(STp, &SRpnt); - else - blk = osst_get_sector(STp, &SRpnt); - if (blk < 0) { - retval = blk; - goto out; - } - mt_pos.mt_blkno = blk; - i = copy_to_user(p, &mt_pos, sizeof(struct mtpos)); - if (i) - retval = -EFAULT; - goto out; - } - if (SRpnt) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - retval = scsi_ioctl(STp->device, cmd_in, p); - mutex_unlock(&osst_int_mutex); - return retval; - -out: - if (SRpnt) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - mutex_unlock(&osst_int_mutex); - - return retval; -} - -#ifdef CONFIG_COMPAT -static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg) -{ - struct osst_tape *STp = file->private_data; - struct scsi_device *sdev = STp->device; - int ret = -ENOIOCTLCMD; - if (sdev->host->hostt->compat_ioctl) { - - ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg); - - } - return ret; -} -#endif - - - -/* Memory handling routines */ - -/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ -static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) -{ - int i; - gfp_t priority; - struct osst_buffer *tb; - - if (from_initialization) - priority = GFP_ATOMIC; - else - priority = GFP_KERNEL; - - i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist); - tb = kzalloc(i, priority); - if (!tb) { - printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n"); - return NULL; - } - - tb->sg_segs = tb->orig_sg_segs = 0; - tb->use_sg = max_sg; - tb->in_use = 1; - tb->dma = need_dma; - tb->buffer_size = 0; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG - "osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n", - i, max_sg, need_dma); -#endif - return tb; -} - -/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ -static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) -{ - int segs, nbr, max_segs, b_size, order, got; - gfp_t priority; - - if (STbuffer->buffer_size >= OS_FRAME_SIZE) - return 1; - - if (STbuffer->sg_segs) { - printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n"); - normalize_buffer(STbuffer); - } - /* See how many segments we can use -- need at least two */ - nbr = max_segs = STbuffer->use_sg; - if (nbr <= 2) - return 0; - - priority = GFP_KERNEL /* | __GFP_NOWARN */; - if (need_dma) - priority |= GFP_DMA; - - /* Try to allocate the first segment up to OS_DATA_SIZE and the others - big enough to reach the goal (code assumes no segments in place) */ - for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) { - struct page *page = alloc_pages(priority, order); - - STbuffer->sg[0].offset = 0; - if (page != NULL) { - sg_set_page(&STbuffer->sg[0], page, b_size, 0); - STbuffer->b_data = page_address(page); - break; - } - } - if (sg_page(&STbuffer->sg[0]) == NULL) { - printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n"); - return 0; - } - /* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */ - for (segs=STbuffer->sg_segs=1, got=b_size; - segs < max_segs && got < OS_FRAME_SIZE; ) { - struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order); - STbuffer->sg[segs].offset = 0; - if (page == NULL) { - printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", - OS_FRAME_SIZE); -#if DEBUG - STbuffer->buffer_size = got; -#endif - normalize_buffer(STbuffer); - return 0; - } - sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0); - got += STbuffer->sg[segs].length; - STbuffer->buffer_size = got; - STbuffer->sg_segs = ++segs; - } -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG - "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n", - got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data); - printk(OSST_DEB_MSG - "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n", - STbuffer->sg[0].length, page_address(STbuffer->sg[0].page), - STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page)); - } -#endif - - return 1; -} - - -/* Release the segments */ -static void normalize_buffer(struct osst_buffer *STbuffer) -{ - int i, order, b_size; - - for (i=0; i < STbuffer->sg_segs; i++) { - - for (b_size = PAGE_SIZE, order = 0; - b_size < STbuffer->sg[i].length; - b_size *= 2, order++); - - __free_pages(sg_page(&STbuffer->sg[i]), order); - STbuffer->buffer_size -= STbuffer->sg[i].length; - } -#if DEBUG - if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs) - printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n", - STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs); -#endif - STbuffer->sg_segs = STbuffer->orig_sg_segs = 0; -} - - -/* Move data from the user buffer to the tape buffer. Returns zero (success) or - negative error code. */ -static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count) -{ - int i, cnt, res, offset; - - for (i=0, offset=st_bp->buffer_bytes; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n"); - return (-EIO); - } - for ( ; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count; - res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt); - if (res) - return (-EFAULT); - do_count -= cnt; - st_bp->buffer_bytes += cnt; - ubp += cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n", - do_count); - return (-EIO); - } - return 0; -} - - -/* Move data from the tape buffer to the user buffer. Returns zero (success) or - negative error code. */ -static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count) -{ - int i, cnt, res, offset; - - for (i=0, offset=st_bp->read_pointer; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n"); - return (-EIO); - } - for ( ; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count; - res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt); - if (res) - return (-EFAULT); - do_count -= cnt; - st_bp->buffer_bytes -= cnt; - st_bp->read_pointer += cnt; - ubp += cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count); - return (-EIO); - } - return 0; -} - -/* Sets the tail of the buffer after fill point to zero. - Returns zero (success) or negative error code. */ -static int osst_zero_buffer_tail(struct osst_buffer *st_bp) -{ - int i, offset, do_count, cnt; - - for (i = 0, offset = st_bp->buffer_bytes; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n"); - return (-EIO); - } - for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes; - i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count ; - memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt); - do_count -= cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count); - return (-EIO); - } - return 0; -} - -/* Copy a osst 32K chunk of memory into the buffer. - Returns zero (success) or negative error code. */ -static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr) -{ - int i, cnt, do_count = OS_DATA_SIZE; - - for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length < do_count ? - st_bp->sg[i].length : do_count ; - memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt); - do_count -= cnt; - ptr += cnt; - } - if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n", - do_count, i); - return (-EIO); - } - return 0; -} - -/* Copy a osst 32K chunk of memory from the buffer. - Returns zero (success) or negative error code. */ -static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr) -{ - int i, cnt, do_count = OS_DATA_SIZE; - - for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length < do_count ? - st_bp->sg[i].length : do_count ; - memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt); - do_count -= cnt; - ptr += cnt; - } - if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n", - do_count, i); - return (-EIO); - } - return 0; -} - - -/* Module housekeeping */ - -static void validate_options (void) -{ - if (max_dev > 0) - osst_max_dev = max_dev; - if (write_threshold_kbs > 0) - osst_write_threshold = write_threshold_kbs * ST_KILOBYTE; - if (osst_write_threshold > osst_buffer_size) - osst_write_threshold = osst_buffer_size; - if (max_sg_segs >= OSST_FIRST_SG) - osst_max_sg_segs = max_sg_segs; -#if DEBUG - printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n", - osst_max_dev, osst_write_threshold, osst_max_sg_segs); -#endif -} - -#ifndef MODULE -/* Set the boot options. Syntax: osst=xxx,yyy,... - where xxx is write threshold in 1024 byte blocks, - and yyy is number of s/g segments to use. */ -static int __init osst_setup (char *str) -{ - int i, ints[5]; - char *stp; - - stp = get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++) - *parms[i].val = ints[i + 1]; - } else { - while (stp != NULL) { - for (i = 0; i < ARRAY_SIZE(parms); i++) { - int len = strlen(parms[i].name); - if (!strncmp(stp, parms[i].name, len) && - (*(stp + len) == ':' || *(stp + len) == '=')) { - *parms[i].val = - simple_strtoul(stp + len + 1, NULL, 0); - break; - } - } - if (i >= ARRAY_SIZE(parms)) - printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n", - stp); - stp = strchr(stp, ','); - if (stp) - stp++; - } - } - - return 1; -} - -__setup("osst=", osst_setup); - -#endif - -static const struct file_operations osst_fops = { - .owner = THIS_MODULE, - .read = osst_read, - .write = osst_write, - .unlocked_ioctl = osst_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = osst_compat_ioctl, -#endif - .open = os_scsi_tape_open, - .flush = os_scsi_tape_flush, - .release = os_scsi_tape_close, - .llseek = noop_llseek, -}; - -static int osst_supports(struct scsi_device * SDp) -{ - struct osst_support_data { - char *vendor; - char *model; - char *rev; - char *driver_hint; /* Name of the correct driver, NULL if unknown */ - }; - -static struct osst_support_data support_list[] = { - /* {"XXX", "Yy-", "", NULL}, example */ - SIGS_FROM_OSST, - {NULL, }}; - - struct osst_support_data *rp; - - /* We are willing to drive OnStream SC-x0 as well as the - * * IDE, ParPort, FireWire, USB variants, if accessible by - * * emulation layer (ide-scsi, usb-storage, ...) */ - - for (rp=&(support_list[0]); rp->vendor != NULL; rp++) - if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && - !strncmp(rp->model, SDp->model, strlen(rp->model)) && - !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) - return 1; - return 0; -} - -/* - * sysfs support for osst driver parameter information - */ - -static ssize_t version_show(struct device_driver *ddd, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%s\n", osst_version); -} - -static DRIVER_ATTR_RO(version); - -static int osst_create_sysfs_files(struct device_driver *sysfs) -{ - return driver_create_file(sysfs, &driver_attr_version); -} - -static void osst_remove_sysfs_files(struct device_driver *sysfs) -{ - driver_remove_file(sysfs, &driver_attr_version); -} - -/* - * sysfs support for accessing ADR header information - */ - -static ssize_t osst_adr_rev_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev); - return l; -} - -DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL); - -static ssize_t osst_linux_media_version_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version); - return l; -} - -DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL); - -static ssize_t osst_capacity_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity); - return l; -} - -DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL); - -static ssize_t osst_first_data_ppos_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos); - return l; -} - -DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL); - -static ssize_t osst_eod_frame_ppos_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos); - return l; -} - -DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL); - -static ssize_t osst_filemark_cnt_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt); - return l; -} - -DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL); - -static struct class *osst_sysfs_class; - -static int osst_sysfs_init(void) -{ - osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape"); - if (IS_ERR(osst_sysfs_class)) { - printk(KERN_ERR "osst :W: Unable to register sysfs class\n"); - return PTR_ERR(osst_sysfs_class); - } - - return 0; -} - -static void osst_sysfs_destroy(dev_t dev) -{ - device_destroy(osst_sysfs_class, dev); -} - -static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name) -{ - struct device *osst_member; - int err; - - osst_member = device_create(osst_sysfs_class, device, dev, STp, - "%s", name); - if (IS_ERR(osst_member)) { - printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); - return PTR_ERR(osst_member); - } - - err = device_create_file(osst_member, &dev_attr_ADR_rev); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_media_version); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_capacity); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_BOT_frame); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_EOD_frame); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_file_count); - if (err) - goto err_out; - - return 0; - -err_out: - osst_sysfs_destroy(dev); - return err; -} - -static void osst_sysfs_cleanup(void) -{ - class_destroy(osst_sysfs_class); -} - -/* - * osst startup / cleanup code - */ - -static int osst_probe(struct device *dev) -{ - struct scsi_device * SDp = to_scsi_device(dev); - struct osst_tape * tpnt; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_buffer * buffer; - struct gendisk * drive; - int i, dev_num, err = -ENODEV; - - if (SDp->type != TYPE_TAPE || !osst_supports(SDp)) - return -ENODEV; - - drive = alloc_disk(1); - if (!drive) { - printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n"); - return -ENODEV; - } - - /* if this is the first attach, build the infrastructure */ - write_lock(&os_scsi_tapes_lock); - if (os_scsi_tapes == NULL) { - os_scsi_tapes = kmalloc_array(osst_max_dev, - sizeof(struct osst_tape *), - GFP_ATOMIC); - if (os_scsi_tapes == NULL) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n"); - goto out_put_disk; - } - for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL; - } - - if (osst_nr_dev >= osst_max_dev) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev); - goto out_put_disk; - } - - /* find a free minor number */ - for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++) - ; - if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)"); - dev_num = i; - - /* allocate a struct osst_tape for this device */ - tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC); - if (!tpnt) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n"); - goto out_put_disk; - } - - /* allocate a buffer for this device */ - i = SDp->host->sg_tablesize; - if (osst_max_sg_segs < i) - i = osst_max_sg_segs; - buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i); - if (buffer == NULL) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n"); - kfree(tpnt); - goto out_put_disk; - } - os_scsi_tapes[dev_num] = tpnt; - tpnt->buffer = buffer; - tpnt->device = SDp; - drive->private_data = &tpnt->driver; - sprintf(drive->disk_name, "osst%d", dev_num); - tpnt->driver = &osst_template; - tpnt->drive = drive; - tpnt->in_use = 0; - tpnt->capacity = 0xfffff; - tpnt->dirty = 0; - tpnt->drv_buffer = 1; /* Try buffering if no mode sense */ - tpnt->restr_dma = (SDp->host)->unchecked_isa_dma; - tpnt->density = 0; - tpnt->do_auto_lock = OSST_AUTO_LOCK; - tpnt->can_bsr = OSST_IN_FILE_POS; - tpnt->can_partitions = 0; - tpnt->two_fm = OSST_TWO_FM; - tpnt->fast_mteom = OSST_FAST_MTEOM; - tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */ - tpnt->write_threshold = osst_write_threshold; - tpnt->default_drvbuffer = 0xff; /* No forced buffering */ - tpnt->partition = 0; - tpnt->new_partition = 0; - tpnt->nbr_partitions = 0; - tpnt->min_block = 512; - tpnt->max_block = OS_DATA_SIZE; - tpnt->timeout = OSST_TIMEOUT; - tpnt->long_timeout = OSST_LONG_TIMEOUT; - - /* Recognize OnStream tapes */ - /* We don't need to test for OnStream, as this has been done in detect () */ - tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev); - tpnt->omit_blklims = 1; - - tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) || - (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp); - tpnt->frame_in_buffer = 0; - tpnt->header_ok = 0; - tpnt->linux_media = 0; - tpnt->header_cache = NULL; - - for (i=0; i < ST_NBR_MODES; i++) { - STm = &(tpnt->modes[i]); - STm->defined = 0; - STm->sysv = OSST_SYSV; - STm->defaults_for_writes = 0; - STm->do_async_writes = OSST_ASYNC_WRITES; - STm->do_buffer_writes = OSST_BUFFER_WRITES; - STm->do_read_ahead = OSST_READ_AHEAD; - STm->default_compression = ST_DONT_TOUCH; - STm->default_blksize = 512; - STm->default_density = (-1); /* No forced density */ - } - - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(tpnt->ps[i]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = (-1); - STps->drv_file = (-1); - } - - tpnt->current_mode = 0; - tpnt->modes[0].defined = 1; - tpnt->modes[2].defined = 1; - tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0; - - mutex_init(&tpnt->lock); - osst_nr_dev++; - write_unlock(&os_scsi_tapes_lock); - - { - char name[8]; - - /* Rewind entry */ - err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt)); - if (err) - goto out_free_buffer; - - /* No-rewind entry */ - snprintf(name, 8, "%s%s", "n", tape_name(tpnt)); - err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name); - if (err) - goto out_free_sysfs1; - } - - sdev_printk(KERN_INFO, SDp, - "osst :I: Attached OnStream %.5s tape as %s\n", - SDp->model, tape_name(tpnt)); - - return 0; - -out_free_sysfs1: - osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num)); -out_free_buffer: - kfree(buffer); -out_put_disk: - put_disk(drive); - return err; -}; - -static int osst_remove(struct device *dev) -{ - struct scsi_device * SDp = to_scsi_device(dev); - struct osst_tape * tpnt; - int i; - - if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0)) - return 0; - - write_lock(&os_scsi_tapes_lock); - for(i=0; i < osst_max_dev; i++) { - if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) { - osst_sysfs_destroy(MKDEV(OSST_MAJOR, i)); - osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128)); - tpnt->device = NULL; - put_disk(tpnt->drive); - os_scsi_tapes[i] = NULL; - osst_nr_dev--; - write_unlock(&os_scsi_tapes_lock); - vfree(tpnt->header_cache); - if (tpnt->buffer) { - normalize_buffer(tpnt->buffer); - kfree(tpnt->buffer); - } - kfree(tpnt); - return 0; - } - } - write_unlock(&os_scsi_tapes_lock); - return 0; -} - -static int __init init_osst(void) -{ - int err; - - printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid); - - validate_options(); - - err = osst_sysfs_init(); - if (err) - return err; - - err = register_chrdev(OSST_MAJOR, "osst", &osst_fops); - if (err < 0) { - printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR); - goto err_out; - } - - err = scsi_register_driver(&osst_template.gendrv); - if (err) - goto err_out_chrdev; - - err = osst_create_sysfs_files(&osst_template.gendrv); - if (err) - goto err_out_scsidrv; - - return 0; - -err_out_scsidrv: - scsi_unregister_driver(&osst_template.gendrv); -err_out_chrdev: - unregister_chrdev(OSST_MAJOR, "osst"); -err_out: - osst_sysfs_cleanup(); - return err; -} - -static void __exit exit_osst (void) -{ - int i; - struct osst_tape * STp; - - osst_remove_sysfs_files(&osst_template.gendrv); - scsi_unregister_driver(&osst_template.gendrv); - unregister_chrdev(OSST_MAJOR, "osst"); - osst_sysfs_cleanup(); - - if (os_scsi_tapes) { - for (i=0; i < osst_max_dev; ++i) { - if (!(STp = os_scsi_tapes[i])) continue; - /* This is defensive, supposed to happen during detach */ - vfree(STp->header_cache); - if (STp->buffer) { - normalize_buffer(STp->buffer); - kfree(STp->buffer); - } - put_disk(STp->drive); - kfree(STp); - } - kfree(os_scsi_tapes); - } - printk(KERN_INFO "osst :I: Unloaded.\n"); -} - -module_init(init_osst); -module_exit(exit_osst); diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h deleted file mode 100644 index b90ae280853d..000000000000 --- a/drivers/scsi/osst.h +++ /dev/null @@ -1,651 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * $Header: /cvsroot/osst/Driver/osst.h,v 1.16 2005/01/01 21:13:35 wriede Exp $ - */ - -#include -#include -#include - -/* FIXME - rename and use the following two types or delete them! - * and the types really should go to st.h anyway... - * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C) - */ -typedef struct { - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - u8 additional_length; /* Additional Length (total_length-4) */ - u8 rsv5, rsv6, rsv7; /* Reserved */ - u8 vendor_id[8]; /* Vendor Identification */ - u8 product_id[16]; /* Product Identification */ - u8 revision_level[4]; /* Revision Level */ - u8 vendor_specific[20]; /* Vendor Specific - Optional */ - u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idetape_inquiry_result_t; - -/* - * READ POSITION packet command - Data Format (From Table 6-57) - */ -typedef struct { - unsigned reserved0_10 :2; /* Reserved */ - unsigned bpu :1; /* Block Position Unknown */ - unsigned reserved0_543 :3; /* Reserved */ - unsigned eop :1; /* End Of Partition */ - unsigned bop :1; /* Beginning Of Partition */ - u8 partition; /* Partition Number */ - u8 reserved2, reserved3; /* Reserved */ - u32 first_block; /* First Block Location */ - u32 last_block; /* Last Block Location (Optional) */ - u8 reserved12; /* Reserved */ - u8 blocks_in_buffer[3]; /* Blocks In Buffer - (Optional) */ - u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ -} idetape_read_position_result_t; - -/* - * Follows structures which are related to the SELECT SENSE / MODE SENSE - * packet commands. - */ -#define COMPRESSION_PAGE 0x0f -#define COMPRESSION_PAGE_LENGTH 16 - -#define CAPABILITIES_PAGE 0x2a -#define CAPABILITIES_PAGE_LENGTH 20 - -#define TAPE_PARAMTR_PAGE 0x2b -#define TAPE_PARAMTR_PAGE_LENGTH 16 - -#define NUMBER_RETRIES_PAGE 0x2f -#define NUMBER_RETRIES_PAGE_LENGTH 4 - -#define BLOCK_SIZE_PAGE 0x30 -#define BLOCK_SIZE_PAGE_LENGTH 4 - -#define BUFFER_FILLING_PAGE 0x33 -#define BUFFER_FILLING_PAGE_LENGTH 4 - -#define VENDOR_IDENT_PAGE 0x36 -#define VENDOR_IDENT_PAGE_LENGTH 8 - -#define LOCATE_STATUS_PAGE 0x37 -#define LOCATE_STATUS_PAGE_LENGTH 0 - -#define MODE_HEADER_LENGTH 4 - - -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { - unsigned error_code :7; /* Current of deferred errors */ - unsigned valid :1; /* The information field conforms to QIC-157C */ - u8 reserved1 :8; /* Segment Number - Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned eom :1; /* End Of Medium */ - unsigned filemark :1; /* Filemark */ - u32 information __attribute__ ((packed)); - u8 asl; /* Additional sense length (n-7) */ - u32 command_specific; /* Additional command specific information */ - u8 asc; /* Additional Sense Code */ - u8 ascq; /* Additional Sense Code Qualifier */ - u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - unsigned sk_specific1 :7; /* Sense Key Specific */ - unsigned sksv :1; /* Sense Key Specific information is valid */ - u8 sk_specific2; /* Sense Key Specific */ - u8 sk_specific3; /* Sense Key Specific */ - u8 pad[2]; /* Padding to 20 bytes */ -} idetape_request_sense_result_t; - -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - u8 mode_data_length; /* Length of the following data transfer */ - u8 medium_type; /* Medium Type */ - u8 dsp; /* Device Specific Parameter */ - u8 bdl; /* Block Descriptor Length */ -} osst_mode_parameter_header_t; - -/* - * Mode Parameter Block Descriptor the MODE SENSE packet command - * - * Support for block descriptors is optional. - */ -typedef struct { - u8 density_code; /* Medium density code */ - u8 blocks[3]; /* Number of blocks */ - u8 reserved4; /* Reserved */ - u8 length[3]; /* Block Length */ -} osst_parameter_block_descriptor_t; - -/* - * The Data Compression Page, as returned by the MODE SENSE packet command. - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved0 :1; /* Reserved */ - unsigned page_code :6; /* Page Code - Should be 0xf */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page Code - Should be 0xf */ - unsigned reserved0 :1; /* Reserved */ - unsigned ps :1; -#else -#error "Please fix " -#endif - u8 page_length; /* Page Length - Should be 14 */ -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned dce :1; /* Data Compression Enable */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned reserved2 :6; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved2 :6; /* Reserved */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned dce :1; /* Data Compression Enable */ -#else -#error "Please fix " -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned dde :1; /* Data Decompression Enable */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned reserved3 :5; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved3 :5; /* Reserved */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned dde :1; /* Data Decompression Enable */ -#else -#error "Please fix " -#endif - u32 ca; /* Compression Algorithm */ - u32 da; /* Decompression Algorithm */ - u8 reserved[4]; /* Reserved */ -} osst_data_compression_page_t; - -/* - * The Medium Partition Page, as returned by the MODE SENSE packet command. - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page Code - Should be 0x11 */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page Code - Should be 0x11 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; -#else -#error "Please fix " -#endif - u8 page_length; /* Page Length - Should be 6 */ - u8 map; /* Maximum Additional Partitions - Should be 0 */ - u8 apd; /* Additional Partitions Defined - Should be 0 */ -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned fdp :1; /* Fixed Data Partitions */ - unsigned sdp :1; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned psum :2; /* Should be 0 */ - unsigned reserved4_012 :3; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved4_012 :3; /* Reserved */ - unsigned psum :2; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned sdp :1; /* Should be 0 */ - unsigned fdp :1; /* Fixed Data Partitions */ -#else -#error "Please fix " -#endif - u8 mfr; /* Medium Format Recognition */ - u8 reserved[2]; /* Reserved */ -} osst_medium_partition_page_t; - -/* - * Capabilities and Mechanical Status Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved1_67 :2; - unsigned page_code :6; /* Page code - Should be 0x2a */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x2a */ - unsigned reserved1_67 :2; -#else -#error "Please fix " -#endif - u8 page_length; /* Page Length - Should be 0x12 */ - u8 reserved2, reserved3; -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved4_67 :2; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_1234 :4; - unsigned ro :1; /* Read Only Mode */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned ro :1; /* Read Only Mode */ - unsigned reserved4_1234 :4; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_67 :2; -#else -#error "Please fix " -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved5_67 :2; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_4 :1; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_012 :3; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved5_012 :3; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_4 :1; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_67 :2; -#else -#error "Please fix " -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned cmprs :1; /* Supports data compression */ - unsigned ecc :1; /* Supports error correction */ - unsigned reserved6_45 :2; /* Reserved */ - unsigned eject :1; /* The device can eject the volume */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned locked :1; /* The volume is locked */ - unsigned lock :1; /* Supports locking the volume */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned lock :1; /* Supports locking the volume */ - unsigned locked :1; /* The volume is locked */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned eject :1; /* The device can eject the volume */ - unsigned reserved6_45 :2; /* Reserved */ - unsigned ecc :1; /* Supports error correction */ - unsigned cmprs :1; /* Supports data compression */ -#else -#error "Please fix " -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ - unsigned reserved7_3_6 :4; - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned reserved7_0 :1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved7_0 :1; - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned reserved7_3_6 :4; - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ -#else -#error "Please fix " -#endif - __be16 max_speed; /* Maximum speed supported in KBps */ - u8 reserved10, reserved11; - __be16 ctl; /* Continuous Transfer Limit in blocks */ - __be16 speed; /* Current Speed, in KBps */ - __be16 buffer_size; /* Buffer Size, in 512 bytes */ - u8 reserved18, reserved19; -} osst_capabilities_page_t; - -/* - * Block Size Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; - unsigned page_code :6; /* Page code - Should be 0x30 */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x30 */ - unsigned reserved1_6 :1; - unsigned ps :1; -#else -#error "Please fix " -#endif - u8 page_length; /* Page Length - Should be 2 */ - u8 reserved2; -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned one :1; - unsigned reserved2_6 :1; - unsigned record32_5 :1; - unsigned record32 :1; - unsigned reserved2_23 :2; - unsigned play32_5 :1; - unsigned play32 :1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned play32 :1; - unsigned play32_5 :1; - unsigned reserved2_23 :2; - unsigned record32 :1; - unsigned record32_5 :1; - unsigned reserved2_6 :1; - unsigned one :1; -#else -#error "Please fix " -#endif -} osst_block_size_page_t; - -/* - * Tape Parameters Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; - unsigned page_code :6; /* Page code - Should be 0x2b */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x2b */ - unsigned reserved1_6 :1; - unsigned ps :1; -#else -#error "Please fix " -#endif - u8 reserved2; - u8 density; - u8 reserved3,reserved4; - __be16 segtrk; - __be16 trks; - u8 reserved5,reserved6,reserved7,reserved8,reserved9,reserved10; -} osst_tape_paramtr_page_t; - -/* OnStream definitions */ - -#define OS_CONFIG_PARTITION (0xff) -#define OS_DATA_PARTITION (0) -#define OS_PARTITION_VERSION (1) - -/* - * partition - */ -typedef struct os_partition_s { - __u8 partition_num; - __u8 par_desc_ver; - __be16 wrt_pass_cntr; - __be32 first_frame_ppos; - __be32 last_frame_ppos; - __be32 eod_frame_ppos; -} os_partition_t; - -/* - * DAT entry - */ -typedef struct os_dat_entry_s { - __be32 blk_sz; - __be16 blk_cnt; - __u8 flags; - __u8 reserved; -} os_dat_entry_t; - -/* - * DAT - */ -#define OS_DAT_FLAGS_DATA (0xc) -#define OS_DAT_FLAGS_MARK (0x1) - -typedef struct os_dat_s { - __u8 dat_sz; - __u8 reserved1; - __u8 entry_cnt; - __u8 reserved3; - os_dat_entry_t dat_list[16]; -} os_dat_t; - -/* - * Frame types - */ -#define OS_FRAME_TYPE_FILL (0) -#define OS_FRAME_TYPE_EOD (1 << 0) -#define OS_FRAME_TYPE_MARKER (1 << 1) -#define OS_FRAME_TYPE_HEADER (1 << 3) -#define OS_FRAME_TYPE_DATA (1 << 7) - -/* - * AUX - */ -typedef struct os_aux_s { - __be32 format_id; /* hardware compatibility AUX is based on */ - char application_sig[4]; /* driver used to write this media */ - __be32 hdwr; /* reserved */ - __be32 update_frame_cntr; /* for configuration frame */ - __u8 frame_type; - __u8 frame_type_reserved; - __u8 reserved_18_19[2]; - os_partition_t partition; - __u8 reserved_36_43[8]; - __be32 frame_seq_num; - __be32 logical_blk_num_high; - __be32 logical_blk_num; - os_dat_t dat; - __u8 reserved188_191[4]; - __be32 filemark_cnt; - __be32 phys_fm; - __be32 last_mark_ppos; - __u8 reserved204_223[20]; - - /* - * __u8 app_specific[32]; - * - * Linux specific fields: - */ - __be32 next_mark_ppos; /* when known, points to next marker */ - __be32 last_mark_lbn; /* storing log_blk_num of last mark is extends ADR spec */ - __u8 linux_specific[24]; - - __u8 reserved_256_511[256]; -} os_aux_t; - -#define OS_FM_TAB_MAX 1024 - -typedef struct os_fm_tab_s { - __u8 fm_part_num; - __u8 reserved_1; - __u8 fm_tab_ent_sz; - __u8 reserved_3; - __be16 fm_tab_ent_cnt; - __u8 reserved6_15[10]; - __be32 fm_tab_ent[OS_FM_TAB_MAX]; -} os_fm_tab_t; - -typedef struct os_ext_trk_ey_s { - __u8 et_part_num; - __u8 fmt; - __be16 fm_tab_off; - __u8 reserved4_7[4]; - __be32 last_hlb_hi; - __be32 last_hlb; - __be32 last_pp; - __u8 reserved20_31[12]; -} os_ext_trk_ey_t; - -typedef struct os_ext_trk_tb_s { - __u8 nr_stream_part; - __u8 reserved_1; - __u8 et_ent_sz; - __u8 reserved3_15[13]; - os_ext_trk_ey_t dat_ext_trk_ey; - os_ext_trk_ey_t qfa_ext_trk_ey; -} os_ext_trk_tb_t; - -typedef struct os_header_s { - char ident_str[8]; - __u8 major_rev; - __u8 minor_rev; - __be16 ext_trk_tb_off; - __u8 reserved12_15[4]; - __u8 pt_par_num; - __u8 pt_reserved1_3[3]; - os_partition_t partition[16]; - __be32 cfg_col_width; - __be32 dat_col_width; - __be32 qfa_col_width; - __u8 cartridge[16]; - __u8 reserved304_511[208]; - __be32 old_filemark_list[16680/4]; /* in ADR 1.4 __u8 track_table[16680] */ - os_ext_trk_tb_t ext_track_tb; - __u8 reserved17272_17735[464]; - os_fm_tab_t dat_fm_tab; - os_fm_tab_t qfa_fm_tab; - __u8 reserved25960_32767[6808]; -} os_header_t; - - -/* - * OnStream ADRL frame - */ -#define OS_FRAME_SIZE (32 * 1024 + 512) -#define OS_DATA_SIZE (32 * 1024) -#define OS_AUX_SIZE (512) -//#define OSST_MAX_SG 2 - -/* The OnStream tape buffer descriptor. */ -struct osst_buffer { - unsigned char in_use; - unsigned char dma; /* DMA-able buffer */ - int buffer_size; - int buffer_blocks; - int buffer_bytes; - int read_pointer; - int writing; - int midlevel_result; - int syscall_result; - struct osst_request *last_SRpnt; - struct st_cmdstatus cmdstat; - struct rq_map_data map_data; - unsigned char *b_data; - os_aux_t *aux; /* onstream AUX structure at end of each block */ - unsigned short use_sg; /* zero or number of s/g segments for this adapter */ - unsigned short sg_segs; /* number of segments in s/g list */ - unsigned short orig_sg_segs; /* number of segments allocated at first try */ - struct scatterlist sg[1]; /* MUST BE last item */ -} ; - -/* The OnStream tape drive descriptor */ -struct osst_tape { - struct scsi_driver *driver; - unsigned capacity; - struct scsi_device *device; - struct mutex lock; /* for serialization */ - struct completion wait; /* for SCSI commands */ - struct osst_buffer * buffer; - - /* Drive characteristics */ - unsigned char omit_blklims; - unsigned char do_auto_lock; - unsigned char can_bsr; - unsigned char can_partitions; - unsigned char two_fm; - unsigned char fast_mteom; - unsigned char restr_dma; - unsigned char scsi2_logical; - unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */ - unsigned char pos_unknown; /* after reset position unknown */ - int write_threshold; - int timeout; /* timeout for normal commands */ - int long_timeout; /* timeout for commands known to take long time*/ - - /* Mode characteristics */ - struct st_modedef modes[ST_NBR_MODES]; - int current_mode; - - /* Status variables */ - int partition; - int new_partition; - int nbr_partitions; /* zero until partition support enabled */ - struct st_partstat ps[ST_NBR_PARTITIONS]; - unsigned char dirty; - unsigned char ready; - unsigned char write_prot; - unsigned char drv_write_prot; - unsigned char in_use; - unsigned char blksize_changed; - unsigned char density_changed; - unsigned char compression_changed; - unsigned char drv_buffer; - unsigned char density; - unsigned char door_locked; - unsigned char rew_at_close; - unsigned char inited; - int block_size; - int min_block; - int max_block; - int recover_count; /* from tape opening */ - int abort_count; - int write_count; - int read_count; - int recover_erreg; /* from last status call */ - /* - * OnStream specific data - */ - int os_fw_rev; /* the firmware revision * 10000 */ - unsigned char raw; /* flag OnStream raw access (32.5KB block size) */ - unsigned char poll; /* flag that this drive needs polling (IDE|firmware) */ - unsigned char frame_in_buffer; /* flag that the frame as per frame_seq_number - * has been read into STp->buffer and is valid */ - int frame_seq_number; /* logical frame number */ - int logical_blk_num; /* logical block number */ - unsigned first_frame_position; /* physical frame to be transferred to/from host */ - unsigned last_frame_position; /* physical frame to be transferd to/from tape */ - int cur_frames; /* current number of frames in internal buffer */ - int max_frames; /* max number of frames in internal buffer */ - char application_sig[5]; /* application signature */ - unsigned char fast_open; /* flag that reminds us we didn't check headers at open */ - unsigned short wrt_pass_cntr; /* write pass counter */ - int update_frame_cntr; /* update frame counter */ - int onstream_write_error; /* write error recovery active */ - int header_ok; /* header frame verified ok */ - int linux_media; /* reading linux-specifc media */ - int linux_media_version; - os_header_t * header_cache; /* cache is kept for filemark positions */ - int filemark_cnt; - int first_mark_ppos; - int last_mark_ppos; - int last_mark_lbn; /* storing log_blk_num of last mark is extends ADR spec */ - int first_data_ppos; - int eod_frame_ppos; - int eod_frame_lfa; - int write_type; /* used in write error recovery */ - int read_error_frame; /* used in read error recovery */ - unsigned long cmd_start_time; - unsigned long max_cmd_time; - -#if DEBUG - unsigned char write_pending; - int nbr_finished; - int nbr_waits; - unsigned char last_cmnd[6]; - unsigned char last_sense[16]; -#endif - struct gendisk *drive; -} ; - -/* scsi tape command */ -struct osst_request { - unsigned char cmd[MAX_COMMAND_SIZE]; - unsigned char sense[SCSI_SENSE_BUFFERSIZE]; - int result; - struct osst_tape *stp; - struct completion *waiting; - struct bio *bio; -}; - -/* Values of write_type */ -#define OS_WRITE_DATA 0 -#define OS_WRITE_EOD 1 -#define OS_WRITE_NEW_MARK 2 -#define OS_WRITE_LAST_MARK 3 -#define OS_WRITE_HEADER 4 -#define OS_WRITE_FILLER 5 - -/* Additional rw state */ -#define OS_WRITING_COMPLETE 3 diff --git a/drivers/scsi/osst_detect.h b/drivers/scsi/osst_detect.h deleted file mode 100644 index 83c1d4fb11db..000000000000 --- a/drivers/scsi/osst_detect.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#define SIGS_FROM_OSST \ - {"OnStream", "SC-", "", "osst"}, \ - {"OnStream", "DI-", "", "osst"}, \ - {"OnStream", "DP-", "", "osst"}, \ - {"OnStream", "FW-", "", "osst"}, \ - {"OnStream", "USB", "", "osst"} diff --git a/drivers/scsi/osst_options.h b/drivers/scsi/osst_options.h deleted file mode 100644 index a6a389b88876..000000000000 --- a/drivers/scsi/osst_options.h +++ /dev/null @@ -1,107 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - The compile-time configurable defaults for the Linux SCSI tape driver. - - Copyright 1995 Kai Makisara. - - Last modified: Wed Sep 2 21:24:07 1998 by root@home - - Changed (and renamed) for OnStream SCSI drives garloff@suse.de - 2000-06-21 - - $Header: /cvsroot/osst/Driver/osst_options.h,v 1.6 2003/12/23 14:22:12 wriede Exp $ -*/ - -#ifndef _OSST_OPTIONS_H -#define _OSST_OPTIONS_H - -/* The minimum limit for the number of SCSI tape devices is determined by - OSST_MAX_TAPES. If the number of tape devices and the "slack" defined by - OSST_EXTRA_DEVS exceeds OSST_MAX_TAPES, the large number is used. */ -#define OSST_MAX_TAPES 4 - -/* If OSST_IN_FILE_POS is nonzero, the driver positions the tape after the - record been read by the user program even if the tape has moved further - because of buffered reads. Should be set to zero to support also drives - that can't space backwards over records. NOTE: The tape will be - spaced backwards over an "accidentally" crossed filemark in any case. */ -#define OSST_IN_FILE_POS 1 - -/* The tape driver buffer size in kilobytes. */ -/* Don't change, as this is the HW blocksize */ -#define OSST_BUFFER_BLOCKS 32 - -/* The number of kilobytes of data in the buffer that triggers an - asynchronous write in fixed block mode. See also OSST_ASYNC_WRITES - below. */ -#define OSST_WRITE_THRESHOLD_BLOCKS 32 - -/* OSST_EOM_RESERVE defines the number of frames are kept in reserve for - * * write error recovery when writing near end of medium. ENOSPC is returned - * * when write() is called and the tape write position is within this number - * * of blocks from the tape capacity. */ -#define OSST_EOM_RESERVE 300 - -/* The maximum number of tape buffers the driver allocates. The number - is also constrained by the number of drives detected. Determines the - maximum number of concurrently active tape drives. */ -#define OSST_MAX_BUFFERS OSST_MAX_TAPES - -/* Maximum number of scatter/gather segments */ -/* Fit one buffer in pages and add one for the AUX header */ -#define OSST_MAX_SG (((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE) + 1) - -/* The number of scatter/gather segments to allocate at first try (must be - smaller or equal to the maximum). */ -#define OSST_FIRST_SG ((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE) - -/* The size of the first scatter/gather segments (determines the maximum block - size for SCSI adapters not supporting scatter/gather). The default is set - to try to allocate the buffer as one chunk. */ -#define OSST_FIRST_ORDER (15-PAGE_SHIFT) - - -/* The following lines define defaults for properties that can be set - separately for each drive using the MTSTOPTIONS ioctl. */ - -/* If OSST_TWO_FM is non-zero, the driver writes two filemarks after a - file being written. Some drives can't handle two filemarks at the - end of data. */ -#define OSST_TWO_FM 0 - -/* If OSST_BUFFER_WRITES is non-zero, writes in fixed block mode are - buffered until the driver buffer is full or asynchronous write is - triggered. */ -#define OSST_BUFFER_WRITES 1 - -/* If OSST_ASYNC_WRITES is non-zero, the SCSI write command may be started - without waiting for it to finish. May cause problems in multiple - tape backups. */ -#define OSST_ASYNC_WRITES 1 - -/* If OSST_READ_AHEAD is non-zero, blocks are read ahead in fixed block - mode. */ -#define OSST_READ_AHEAD 1 - -/* If OSST_AUTO_LOCK is non-zero, the drive door is locked at the first - read or write command after the device is opened. The door is opened - when the device is closed. */ -#define OSST_AUTO_LOCK 0 - -/* If OSST_FAST_MTEOM is non-zero, the MTEOM ioctl is done using the - direct SCSI command. The file number status is lost but this method - is fast with some drives. Otherwise MTEOM is done by spacing over - files and the file number status is retained. */ -#define OSST_FAST_MTEOM 0 - -/* If OSST_SCSI2LOGICAL is nonzero, the logical block addresses are used for - MTIOCPOS and MTSEEK by default. Vendor addresses are used if OSST_SCSI2LOGICAL - is zero. */ -#define OSST_SCSI2LOGICAL 0 - -/* If OSST_SYSV is non-zero, the tape behaves according to the SYS V semantics. - The default is BSD semantics. */ -#define OSST_SYSV 0 - - -#endif diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index c544f48a1d18..2368f34efba3 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -20,6 +20,16 @@ config PCMCIA_AHA152X To compile this driver as a module, choose M here: the module will be called aha152x_cs. +config PCMCIA_FDOMAIN + tristate "Future Domain PCMCIA support" + select SCSI_FDOMAIN + help + Say Y here if you intend to attach this type of PCMCIA SCSI host + adapter to your computer. + + To compile this driver as a module, choose M here: the + module will be called fdomain_cs. + config PCMCIA_NINJA_SCSI tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support" depends on !64BIT diff --git a/drivers/scsi/pcmcia/Makefile b/drivers/scsi/pcmcia/Makefile index a5a24dd44e7e..02f5b44a2685 100644 --- a/drivers/scsi/pcmcia/Makefile +++ b/drivers/scsi/pcmcia/Makefile @@ -4,6 +4,7 @@ ccflags-y := -I $(srctree)/drivers/scsi # 16-bit client drivers obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o +obj-$(CONFIG_PCMCIA_FDOMAIN) += fdomain_cs.o obj-$(CONFIG_PCMCIA_AHA152X) += aha152x_cs.o obj-$(CONFIG_PCMCIA_NINJA_SCSI) += nsp_cs.o obj-$(CONFIG_PCMCIA_SYM53C500) += sym53c500_cs.o diff --git a/drivers/scsi/pcmcia/fdomain_cs.c b/drivers/scsi/pcmcia/fdomain_cs.c new file mode 100644 index 000000000000..e42acf314d06 --- /dev/null +++ b/drivers/scsi/pcmcia/fdomain_cs.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) +/* + * Driver for Future Domain-compatible PCMCIA SCSI cards + * Copyright 2019 Ondrej Zary + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include "fdomain.h" + +MODULE_AUTHOR("Ondrej Zary, David Hinds"); +MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + p_dev->io_lines = 10; + p_dev->resource[0]->end = FDOMAIN_REGION_SIZE; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); +} + +static int fdomain_probe(struct pcmcia_device *link) +{ + int ret; + struct Scsi_Host *sh; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; + + ret = pcmcia_loop_config(link, fdomain_config_check, NULL); + if (ret) + return ret; + + ret = pcmcia_enable_device(link); + if (ret) + goto fail_disable; + + if (!request_region(link->resource[0]->start, FDOMAIN_REGION_SIZE, + "fdomain_cs")) + goto fail_disable; + + sh = fdomain_create(link->resource[0]->start, link->irq, 7, &link->dev); + if (!sh) { + dev_err(&link->dev, "Controller initialization failed"); + ret = -ENODEV; + goto fail_release; + } + + link->priv = sh; + + return 0; + +fail_release: + release_region(link->resource[0]->start, FDOMAIN_REGION_SIZE); +fail_disable: + pcmcia_disable_device(link); + return ret; +} + +static void fdomain_remove(struct pcmcia_device *link) +{ + fdomain_destroy(link->priv); + release_region(link->resource[0]->start, FDOMAIN_REGION_SIZE); + pcmcia_disable_device(link); +} + +static const struct pcmcia_device_id fdomain_ids[] = { + PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "SCSI PCMCIA Card", 0xe3736c88, + 0x859cad20), + PCMCIA_DEVICE_PROD_ID1("SCSI PCMCIA Adapter Card", 0x8dacb57e), + PCMCIA_DEVICE_PROD_ID12(" SIMPLE TECHNOLOGY Corporation", + "SCSI PCMCIA Credit Card Controller", + 0x182bdafe, 0xc80d106f), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); + +static struct pcmcia_driver fdomain_cs_driver = { + .owner = THIS_MODULE, + .name = "fdomain_cs", + .probe = fdomain_probe, + .remove = fdomain_remove, + .id_table = fdomain_ids, +}; + +module_pcmcia_driver(fdomain_cs_driver); diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c index d193961ea82f..6b85016b4db3 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.c +++ b/drivers/scsi/pm8001/pm8001_ctl.c @@ -461,6 +461,24 @@ static ssize_t pm8001_ctl_bios_version_show(struct device *cdev, return str - buf; } static DEVICE_ATTR(bios_version, S_IRUGO, pm8001_ctl_bios_version_show, NULL); +/** + * event_log_size_show - event log size + * @cdev: pointer to embedded class device + * @buf: the buffer returned + * + * A sysfs read shost attribute. + */ +static ssize_t event_log_size_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + + return snprintf(buf, PAGE_SIZE, "%d\n", + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size); +} +static DEVICE_ATTR_RO(event_log_size); /** * pm8001_ctl_aap_log_show - IOP event log * @cdev: pointer to embedded class device @@ -474,25 +492,26 @@ static ssize_t pm8001_ctl_iop_log_show(struct device *cdev, struct Scsi_Host *shost = class_to_shost(cdev); struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; -#define IOP_MEMMAP(r, c) \ - (*(u32 *)((u8*)pm8001_ha->memoryMap.region[IOP].virt_ptr + (r) * 32 \ - + (c))) - int i; char *str = buf; - int max = 2; - for (i = 0; i < max; i++) { - str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x" - "0x%08x 0x%08x\n", - IOP_MEMMAP(i, 0), - IOP_MEMMAP(i, 4), - IOP_MEMMAP(i, 8), - IOP_MEMMAP(i, 12), - IOP_MEMMAP(i, 16), - IOP_MEMMAP(i, 20), - IOP_MEMMAP(i, 24), - IOP_MEMMAP(i, 28)); + u32 read_size = + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size / 1024; + static u32 start, end, count; + u32 max_read_times = 32; + u32 max_count = (read_size * 1024) / (max_read_times * 4); + u32 *temp = (u32 *)pm8001_ha->memoryMap.region[IOP].virt_ptr; + + if ((count % max_count) == 0) { + start = 0; + end = max_read_times; + count = 0; + } else { + start = end; + end = end + max_read_times; } + for (; start < end; start++) + str += sprintf(str, "%08x ", *(temp+start)); + count++; return str - buf; } static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL); @@ -796,6 +815,7 @@ struct device_attribute *pm8001_host_attrs[] = { &dev_attr_max_sg_list, &dev_attr_sas_spec_support, &dev_attr_logging_level, + &dev_attr_event_log_size, &dev_attr_host_sas_address, &dev_attr_bios_version, &dev_attr_ib_log, diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 109effd3557d..68a8217032d0 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2356,7 +2356,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && (status != IO_UNDERFLOW)) { if (!((t->dev->parent) && - (DEV_IS_EXPANDER(t->dev->parent->dev_type)))) { + (dev_is_expander(t->dev->parent->dev_type)))) { for (i = 0 , j = 4; j <= 7 && i <= 3; i++ , j++) sata_addr_low[i] = pm8001_ha->sas_addr[j]; for (i = 0 , j = 0; j <= 3 && i <= 3; i++ , j++) @@ -4560,7 +4560,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) stp_sspsmp_sata = 0x01; /*ssp or smp*/ } - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) phy_id = parent_dev->ex_dev.ex_phy->phy_id; else phy_id = pm8001_dev->attached_phy; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 88eef3b18e41..dd38c356a1a4 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -634,7 +634,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) dev->lldd_dev = pm8001_device; pm8001_device->dev_type = dev->dev_type; pm8001_device->dcompletion = &completion; - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { + if (parent_dev && dev_is_expander(parent_dev->dev_type)) { int phy_id; struct ex_phy *phy; for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; @@ -1181,7 +1181,7 @@ int pm8001_query_task(struct sas_task *task) return rc; } -/* mandatory SAM-3, still need free task/ccb info, abord the specified task */ +/* mandatory SAM-3, still need free task/ccb info, abort the specified task */ int pm8001_abort_task(struct sas_task *task) { unsigned long flags; diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index ac6d8e3f22de..ff17c6aff63d 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -103,7 +103,6 @@ do { \ #define PM8001_READ_VPD -#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE)) #define IS_SPCV_12G(dev) ((dev->device == 0X8074) \ || (dev->device == 0X8076) \ || (dev->device == 0X8077) \ diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 301de40eb708..1128d86d241a 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -2066,7 +2066,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && (status != IO_UNDERFLOW)) { if (!((t->dev->parent) && - (DEV_IS_EXPANDER(t->dev->parent->dev_type)))) { + (dev_is_expander(t->dev->parent->dev_type)))) { for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++) sata_addr_low[i] = pm8001_ha->sas_addr[j]; for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++) @@ -4561,7 +4561,7 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) stp_sspsmp_sata = 0x01; /*ssp or smp*/ } - if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + if (parent_dev && dev_is_expander(parent_dev->dev_type)) phy_id = parent_dev->ex_dev.ex_phy->phy_id; else phy_id = pm8001_dev->attached_phy; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 1a4095c56eee..bad2b12604f1 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -532,6 +532,8 @@ typedef struct srb { uint8_t cmd_type; uint8_t pad[3]; atomic_t ref_count; + struct kref cmd_kref; /* need to migrate ref_count over to this */ + void *priv; wait_queue_head_t nvme_ls_waitq; struct fc_port *fcport; struct scsi_qla_host *vha; @@ -554,6 +556,7 @@ typedef struct srb { } u; void (*done)(void *, int); void (*free)(void *); + void (*put_fn)(struct kref *kref); } srb_t; #define GET_CMD_SP(sp) (sp->u.scmd.cmd) @@ -2336,7 +2339,6 @@ typedef struct fc_port { unsigned int id_changed:1; unsigned int scan_needed:1; - struct work_struct nvme_del_work; struct completion nvme_del_done; uint32_t nvme_prli_service_param; #define NVME_PRLI_SP_CONF BIT_7 @@ -4376,7 +4378,6 @@ typedef struct scsi_qla_host { struct nvme_fc_local_port *nvme_local_port; struct completion nvme_del_done; - struct list_head nvme_rport_list; uint16_t fcoe_vlan_id; uint16_t fcoe_fcf_idx; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index bbe69ab5cf3f..f9669fdf7798 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -908,4 +908,6 @@ void qlt_clr_qp_table(struct scsi_qla_host *vha); void qlt_set_mode(struct scsi_qla_host *); int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode); +/* nvme.c */ +void qla_nvme_unregister_remote_port(struct fc_port *fcport); #endif /* _QLA_GBL_H */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 54772d4c377f..4059655639d9 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -5403,7 +5403,6 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); fcport->deleted = 0; fcport->logout_on_delete = 1; - fcport->login_retry = vha->hw->login_retry_count; fcport->n2n_chip_reset = fcport->n2n_link_reset_cnt = 0; switch (vha->hw->current_topology) { diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index 22e3fba28e51..963094b3c300 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -12,8 +12,6 @@ static struct nvme_fc_port_template qla_nvme_fc_transport; -static void qla_nvme_unregister_remote_port(struct work_struct *); - int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport) { struct qla_nvme_rport *rport; @@ -38,7 +36,6 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport) (fcport->nvme_flag & NVME_FLAG_REGISTERED)) return 0; - INIT_WORK(&fcport->nvme_del_work, qla_nvme_unregister_remote_port); fcport->nvme_flag &= ~NVME_FLAG_RESETTING; memset(&req, 0, sizeof(struct nvme_fc_port_info)); @@ -74,7 +71,6 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport) rport = fcport->nvme_remote_port->private; rport->fcport = fcport; - list_add_tail(&rport->list, &vha->nvme_rport_list); fcport->nvme_flag |= NVME_FLAG_REGISTERED; return 0; @@ -124,53 +120,91 @@ static int qla_nvme_alloc_queue(struct nvme_fc_local_port *lport, return 0; } -static void qla_nvme_sp_ls_done(void *ptr, int res) +static void qla_nvme_release_fcp_cmd_kref(struct kref *kref) { - srb_t *sp = ptr; - struct srb_iocb *nvme; - struct nvmefc_ls_req *fd; - struct nvme_private *priv; - - if (WARN_ON_ONCE(atomic_read(&sp->ref_count) == 0)) - return; - - atomic_dec(&sp->ref_count); - - if (res) - res = -EINVAL; - - nvme = &sp->u.iocb_cmd; - fd = nvme->u.nvme.desc; - priv = fd->private; - priv->comp_status = res; - schedule_work(&priv->ls_work); - /* work schedule doesn't need the sp */ - qla2x00_rel_sp(sp); -} - -static void qla_nvme_sp_done(void *ptr, int res) -{ - srb_t *sp = ptr; - struct srb_iocb *nvme; + struct srb *sp = container_of(kref, struct srb, cmd_kref); + struct nvme_private *priv = (struct nvme_private *)sp->priv; struct nvmefc_fcp_req *fd; + struct srb_iocb *nvme; + unsigned long flags; + + if (!priv) + goto out; nvme = &sp->u.iocb_cmd; fd = nvme->u.nvme.desc; - if (WARN_ON_ONCE(atomic_read(&sp->ref_count) == 0)) - return; - - atomic_dec(&sp->ref_count); - - if (res == QLA_SUCCESS) { + spin_lock_irqsave(&priv->cmd_lock, flags); + priv->sp = NULL; + sp->priv = NULL; + if (priv->comp_status == QLA_SUCCESS) { fd->rcv_rsplen = nvme->u.nvme.rsp_pyld_len; } else { fd->rcv_rsplen = 0; fd->transferred_length = 0; } fd->status = 0; + spin_unlock_irqrestore(&priv->cmd_lock, flags); + fd->done(fd); +out: qla2xxx_rel_qpair_sp(sp->qpair, sp); +} + +static void qla_nvme_release_ls_cmd_kref(struct kref *kref) +{ + struct srb *sp = container_of(kref, struct srb, cmd_kref); + struct nvme_private *priv = (struct nvme_private *)sp->priv; + struct nvmefc_ls_req *fd; + unsigned long flags; + + if (!priv) + goto out; + + spin_lock_irqsave(&priv->cmd_lock, flags); + priv->sp = NULL; + sp->priv = NULL; + spin_unlock_irqrestore(&priv->cmd_lock, flags); + + fd = priv->fd; + fd->done(fd, priv->comp_status); +out: + qla2x00_rel_sp(sp); +} + +static void qla_nvme_ls_complete(struct work_struct *work) +{ + struct nvme_private *priv = + container_of(work, struct nvme_private, ls_work); + + kref_put(&priv->sp->cmd_kref, qla_nvme_release_ls_cmd_kref); +} + +static void qla_nvme_sp_ls_done(void *ptr, int res) +{ + srb_t *sp = ptr; + struct nvme_private *priv; + + if (WARN_ON_ONCE(kref_read(&sp->cmd_kref) == 0)) + return; + + if (res) + res = -EINVAL; + + priv = (struct nvme_private *)sp->priv; + priv->comp_status = res; + INIT_WORK(&priv->ls_work, qla_nvme_ls_complete); + schedule_work(&priv->ls_work); +} + +/* it assumed that QPair lock is held. */ +static void qla_nvme_sp_done(void *ptr, int res) +{ + srb_t *sp = ptr; + struct nvme_private *priv = (struct nvme_private *)sp->priv; + + priv->comp_status = res; + kref_put(&sp->cmd_kref, qla_nvme_release_fcp_cmd_kref); return; } @@ -189,44 +223,50 @@ static void qla_nvme_abort_work(struct work_struct *work) __func__, sp, sp->handle, fcport, fcport->deleted); if (!ha->flags.fw_started && (fcport && fcport->deleted)) - return; + goto out; if (ha->flags.host_shutting_down) { ql_log(ql_log_info, sp->fcport->vha, 0xffff, "%s Calling done on sp: %p, type: 0x%x, sp->ref_count: 0x%x\n", __func__, sp, sp->type, atomic_read(&sp->ref_count)); sp->done(sp, 0); - return; + goto out; } - if (WARN_ON_ONCE(atomic_read(&sp->ref_count) == 0)) - return; - rval = ha->isp_ops->abort_command(sp); ql_dbg(ql_dbg_io, fcport->vha, 0x212b, "%s: %s command for sp=%p, handle=%x on fcport=%p rval=%x\n", __func__, (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted", sp, sp->handle, fcport, rval); + +out: + /* kref_get was done before work was schedule. */ + kref_put(&sp->cmd_kref, sp->put_fn); } static void qla_nvme_ls_abort(struct nvme_fc_local_port *lport, struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd) { struct nvme_private *priv = fd->private; + unsigned long flags; + + spin_lock_irqsave(&priv->cmd_lock, flags); + if (!priv->sp) { + spin_unlock_irqrestore(&priv->cmd_lock, flags); + return; + } + + if (!kref_get_unless_zero(&priv->sp->cmd_kref)) { + spin_unlock_irqrestore(&priv->cmd_lock, flags); + return; + } + spin_unlock_irqrestore(&priv->cmd_lock, flags); INIT_WORK(&priv->abort_work, qla_nvme_abort_work); schedule_work(&priv->abort_work); } -static void qla_nvme_ls_complete(struct work_struct *work) -{ - struct nvme_private *priv = - container_of(work, struct nvme_private, ls_work); - struct nvmefc_ls_req *fd = priv->fd; - - fd->done(fd, priv->comp_status); -} static int qla_nvme_ls_req(struct nvme_fc_local_port *lport, struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd) @@ -240,8 +280,16 @@ static int qla_nvme_ls_req(struct nvme_fc_local_port *lport, struct qla_hw_data *ha; srb_t *sp; + + if (!fcport || (fcport && fcport->deleted)) + return rval; + vha = fcport->vha; ha = vha->hw; + + if (!ha->flags.fw_started) + return rval; + /* Alloc SRB structure */ sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC); if (!sp) @@ -250,11 +298,13 @@ static int qla_nvme_ls_req(struct nvme_fc_local_port *lport, sp->type = SRB_NVME_LS; sp->name = "nvme_ls"; sp->done = qla_nvme_sp_ls_done; - atomic_set(&sp->ref_count, 1); - nvme = &sp->u.iocb_cmd; + sp->put_fn = qla_nvme_release_ls_cmd_kref; + sp->priv = (void *)priv; priv->sp = sp; + kref_init(&sp->cmd_kref); + spin_lock_init(&priv->cmd_lock); + nvme = &sp->u.iocb_cmd; priv->fd = fd; - INIT_WORK(&priv->ls_work, qla_nvme_ls_complete); nvme->u.nvme.desc = fd; nvme->u.nvme.dir = 0; nvme->u.nvme.dl = 0; @@ -271,8 +321,10 @@ static int qla_nvme_ls_req(struct nvme_fc_local_port *lport, if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x700e, "qla2x00_start_sp failed = %d\n", rval); - atomic_dec(&sp->ref_count); wake_up(&sp->nvme_ls_waitq); + sp->priv = NULL; + priv->sp = NULL; + qla2x00_rel_sp(sp); return rval; } @@ -284,6 +336,18 @@ static void qla_nvme_fcp_abort(struct nvme_fc_local_port *lport, struct nvmefc_fcp_req *fd) { struct nvme_private *priv = fd->private; + unsigned long flags; + + spin_lock_irqsave(&priv->cmd_lock, flags); + if (!priv->sp) { + spin_unlock_irqrestore(&priv->cmd_lock, flags); + return; + } + if (!kref_get_unless_zero(&priv->sp->cmd_kref)) { + spin_unlock_irqrestore(&priv->cmd_lock, flags); + return; + } + spin_unlock_irqrestore(&priv->cmd_lock, flags); INIT_WORK(&priv->abort_work, qla_nvme_abort_work); schedule_work(&priv->abort_work); @@ -487,11 +551,11 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, fcport = qla_rport->fcport; - vha = fcport->vha; - - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) + if (!qpair || !fcport || (qpair && !qpair->fw_started) || + (fcport && fcport->deleted)) return rval; + vha = fcport->vha; /* * If we know the dev is going away while the transport is still sending * IO's return busy back to stall the IO Q. This happens when the @@ -507,12 +571,15 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, if (!sp) return -EBUSY; - atomic_set(&sp->ref_count, 1); init_waitqueue_head(&sp->nvme_ls_waitq); + kref_init(&sp->cmd_kref); + spin_lock_init(&priv->cmd_lock); + sp->priv = (void *)priv; priv->sp = sp; sp->type = SRB_NVME_CMD; sp->name = "nvme_cmd"; sp->done = qla_nvme_sp_done; + sp->put_fn = qla_nvme_release_fcp_cmd_kref; sp->qpair = qpair; sp->vha = vha; nvme = &sp->u.iocb_cmd; @@ -522,8 +589,10 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x212d, "qla2x00_start_nvme_mq failed = %d\n", rval); - atomic_dec(&sp->ref_count); wake_up(&sp->nvme_ls_waitq); + sp->priv = NULL; + priv->sp = NULL; + qla2xxx_rel_qpair_sp(sp->qpair, sp); } return rval; @@ -542,29 +611,16 @@ static void qla_nvme_localport_delete(struct nvme_fc_local_port *lport) static void qla_nvme_remoteport_delete(struct nvme_fc_remote_port *rport) { fc_port_t *fcport; - struct qla_nvme_rport *qla_rport = rport->private, *trport; + struct qla_nvme_rport *qla_rport = rport->private; fcport = qla_rport->fcport; fcport->nvme_remote_port = NULL; fcport->nvme_flag &= ~NVME_FLAG_REGISTERED; - - list_for_each_entry_safe(qla_rport, trport, - &fcport->vha->nvme_rport_list, list) { - if (qla_rport->fcport == fcport) { - list_del(&qla_rport->list); - break; - } - } - complete(&fcport->nvme_del_done); - - if (!test_bit(UNLOADING, &fcport->vha->dpc_flags)) { - INIT_WORK(&fcport->free_work, qlt_free_session_done); - schedule_work(&fcport->free_work); - } - fcport->nvme_flag &= ~NVME_FLAG_DELETING; ql_log(ql_log_info, fcport->vha, 0x2110, - "remoteport_delete of %p completed.\n", fcport); + "remoteport_delete of %p %8phN completed.\n", + fcport, fcport->port_name); + complete(&fcport->nvme_del_done); } static struct nvme_fc_port_template qla_nvme_fc_transport = { @@ -586,35 +642,25 @@ static struct nvme_fc_port_template qla_nvme_fc_transport = { .fcprqst_priv_sz = sizeof(struct nvme_private), }; -static void qla_nvme_unregister_remote_port(struct work_struct *work) +void qla_nvme_unregister_remote_port(struct fc_port *fcport) { - struct fc_port *fcport = container_of(work, struct fc_port, - nvme_del_work); - struct qla_nvme_rport *qla_rport, *trport; + int ret; if (!IS_ENABLED(CONFIG_NVME_FC)) return; ql_log(ql_log_warn, NULL, 0x2112, - "%s: unregister remoteport on %p\n",__func__, fcport); + "%s: unregister remoteport on %p %8phN\n", + __func__, fcport, fcport->port_name); - list_for_each_entry_safe(qla_rport, trport, - &fcport->vha->nvme_rport_list, list) { - if (qla_rport->fcport == fcport) { - ql_log(ql_log_info, fcport->vha, 0x2113, - "%s: fcport=%p\n", __func__, fcport); - nvme_fc_set_remoteport_devloss - (fcport->nvme_remote_port, 0); - init_completion(&fcport->nvme_del_done); - if (nvme_fc_unregister_remoteport - (fcport->nvme_remote_port)) - ql_log(ql_log_info, fcport->vha, 0x2114, - "%s: Failed to unregister nvme_remote_port\n", - __func__); - wait_for_completion(&fcport->nvme_del_done); - break; - } - } + nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port, 0); + init_completion(&fcport->nvme_del_done); + ret = nvme_fc_unregister_remoteport(fcport->nvme_remote_port); + if (ret) + ql_log(ql_log_info, fcport->vha, 0x2114, + "%s: Failed to unregister nvme_remote_port (%d)\n", + __func__, ret); + wait_for_completion(&fcport->nvme_del_done); } void qla_nvme_delete(struct scsi_qla_host *vha) diff --git a/drivers/scsi/qla2xxx/qla_nvme.h b/drivers/scsi/qla2xxx/qla_nvme.h index d3b8a6440113..67bb4a2a3742 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.h +++ b/drivers/scsi/qla2xxx/qla_nvme.h @@ -34,10 +34,10 @@ struct nvme_private { struct work_struct ls_work; struct work_struct abort_work; int comp_status; + spinlock_t cmd_lock; }; struct qla_nvme_rport { - struct list_head list; struct fc_port *fcport; }; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index d056f5e7cf93..2e58cff9d200 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4789,7 +4789,6 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht, INIT_LIST_HEAD(&vha->plogi_ack_list); INIT_LIST_HEAD(&vha->qp_list); INIT_LIST_HEAD(&vha->gnl.fcports); - INIT_LIST_HEAD(&vha->nvme_rport_list); INIT_LIST_HEAD(&vha->gpnid_list); INIT_WORK(&vha->iocb_work, qla2x00_iocb_work_fn); diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 2fd5c09b42d4..1c1f63be6eed 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1004,6 +1004,12 @@ void qlt_free_session_done(struct work_struct *work) else logout_started = true; } + } /* if sess->logout_on_delete */ + + if (sess->nvme_flag & NVME_FLAG_REGISTERED && + !(sess->nvme_flag & NVME_FLAG_DELETING)) { + sess->nvme_flag |= NVME_FLAG_DELETING; + qla_nvme_unregister_remote_port(sess); } } @@ -1155,14 +1161,8 @@ void qlt_unreg_sess(struct fc_port *sess) sess->last_rscn_gen = sess->rscn_gen; sess->last_login_gen = sess->login_gen; - if (sess->nvme_flag & NVME_FLAG_REGISTERED && - !(sess->nvme_flag & NVME_FLAG_DELETING)) { - sess->nvme_flag |= NVME_FLAG_DELETING; - schedule_work(&sess->nvme_del_work); - } else { - INIT_WORK(&sess->free_work, qlt_free_session_done); - schedule_work(&sess->free_work); - } + INIT_WORK(&sess->free_work, qlt_free_session_done); + schedule_work(&sess->free_work); } EXPORT_SYMBOL(qlt_unreg_sess); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 653d5ea6c5d9..1f5b5c8a7f72 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -86,15 +86,10 @@ unsigned int scsi_logging_level; EXPORT_SYMBOL(scsi_logging_level); #endif -/* sd, scsi core and power management need to coordinate flushing async actions */ -ASYNC_DOMAIN(scsi_sd_probe_domain); -EXPORT_SYMBOL(scsi_sd_probe_domain); - /* - * Separate domain (from scsi_sd_probe_domain) to maximize the benefit of - * asynchronous system resume operations. It is marked 'exclusive' to avoid - * being included in the async_synchronize_full() that is invoked by - * dpm_resume() + * Domain for asynchronous system resume operations. It is marked 'exclusive' + * to avoid being included in the async_synchronize_full() that is invoked by + * dpm_resume(). */ ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain); EXPORT_SYMBOL(scsi_sd_pm_domain); @@ -821,7 +816,6 @@ static void __exit exit_scsi(void) scsi_exit_devinfo(); scsi_exit_procfs(); scsi_exit_queue(); - async_unregister_domain(&scsi_sd_probe_domain); } subsys_initcall(init_scsi); diff --git a/drivers/scsi/scsi_debugfs.h b/drivers/scsi/scsi_debugfs.h index 951b043e82d0..d125d1bd4184 100644 --- a/drivers/scsi/scsi_debugfs.h +++ b/drivers/scsi/scsi_debugfs.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ struct request; struct seq_file; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index bfa569facd5b..1c470e31ae81 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1055,7 +1055,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; DECLARE_COMPLETION_ONSTACK(done); - unsigned long timeleft = timeout; + unsigned long timeleft = timeout, delay; struct scsi_eh_save ses; const unsigned long stall_for = msecs_to_jiffies(100); int rtn; @@ -1066,7 +1066,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, scsi_log_send(scmd); scmd->scsi_done = scsi_eh_done; - rtn = shost->hostt->queuecommand(shost, scmd); + + /* + * Lock sdev->state_mutex to avoid that scsi_device_quiesce() can + * change the SCSI device state after we have examined it and before + * .queuecommand() is called. + */ + mutex_lock(&sdev->state_mutex); + while (sdev->sdev_state == SDEV_BLOCK && timeleft > 0) { + mutex_unlock(&sdev->state_mutex); + SCSI_LOG_ERROR_RECOVERY(5, sdev_printk(KERN_DEBUG, sdev, + "%s: state %d <> %d\n", __func__, sdev->sdev_state, + SDEV_BLOCK)); + delay = min(timeleft, stall_for); + timeleft -= delay; + msleep(jiffies_to_msecs(delay)); + mutex_lock(&sdev->state_mutex); + } + if (sdev->sdev_state != SDEV_BLOCK) + rtn = shost->hostt->queuecommand(shost, scmd); + else + rtn = SCSI_MLQUEUE_DEVICE_BUSY; + mutex_unlock(&sdev->state_mutex); + if (rtn) { if (timeleft > stall_for) { scsi_eh_restore_cmnd(scmd, &ses); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 65d0a10c76ad..a2fa31417749 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -2616,10 +2616,6 @@ EXPORT_SYMBOL_GPL(scsi_internal_device_block_nowait); * a legal transition). When the device is in this state, command processing * is paused until the device leaves the SDEV_BLOCK state. See also * scsi_internal_device_unblock(). - * - * To do: avoid that scsi_send_eh_cmnd() calls queuecommand() after - * scsi_internal_device_block() has blocked a SCSI device and also - * remove the rport mutex lock and unlock calls from srp_queuecommand(). */ static int scsi_internal_device_block(struct scsi_device *sdev) { diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 48ee68059fe6..74ded5f3c236 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -176,11 +176,7 @@ static int scsi_bus_resume_common(struct device *dev, static int scsi_bus_prepare(struct device *dev) { - if (scsi_is_sdev_device(dev)) { - /* sd probing uses async_schedule. Wait until it finishes. */ - async_synchronize_full_domain(&scsi_sd_probe_domain); - - } else if (scsi_is_host_device(dev)) { + if (scsi_is_host_device(dev)) { /* Wait until async scanning is finished */ scsi_complete_async_scans(); } diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 5f21547b2ad2..cc2859d76d81 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -175,7 +175,6 @@ static inline void scsi_autopm_put_host(struct Scsi_Host *h) {} #endif /* CONFIG_PM */ extern struct async_domain scsi_sd_pm_domain; -extern struct async_domain scsi_sd_probe_domain; /* scsi_dh.c */ #ifdef CONFIG_SCSI_DH diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index dbb206c90ecf..64c96c7828ee 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -767,8 +767,13 @@ store_state_field(struct device *dev, struct device_attribute *attr, break; } } - if (!state) + switch (state) { + case SDEV_RUNNING: + case SDEV_OFFLINE: + break; + default: return -EINVAL; + } mutex_lock(&sdev->state_mutex); ret = scsi_device_set_state(sdev, state); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 118a687709ed..2732fa65119c 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3,9 +3,6 @@ * FiberChannel transport specific attributes exported to sysfs. * * Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved. - * - * ======== - * * Copyright (C) 2004-2007 James Smart, Emulex Corporation * Rewrite for host, target, device, and remote port attributes, * statistics, and service functions... diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a3406bd62391..149d406aacc9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -568,6 +568,7 @@ static struct scsi_driver sd_template = { .name = "sd", .owner = THIS_MODULE, .probe = sd_probe, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, .remove = sd_remove, .shutdown = sd_shutdown, .pm = &sd_pm_ops, @@ -3252,69 +3253,6 @@ static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) return 0; } -/* - * The asynchronous part of sd_probe - */ -static void sd_probe_async(void *data, async_cookie_t cookie) -{ - struct scsi_disk *sdkp = data; - struct scsi_device *sdp; - struct gendisk *gd; - u32 index; - struct device *dev; - - sdp = sdkp->device; - gd = sdkp->disk; - index = sdkp->index; - dev = &sdp->sdev_gendev; - - gd->major = sd_major((index & 0xf0) >> 4); - gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); - - gd->fops = &sd_fops; - gd->private_data = &sdkp->driver; - gd->queue = sdkp->device->request_queue; - - /* defaults, until the device tells us otherwise */ - sdp->sector_size = 512; - sdkp->capacity = 0; - sdkp->media_present = 1; - sdkp->write_prot = 0; - sdkp->cache_override = 0; - sdkp->WCE = 0; - sdkp->RCD = 0; - sdkp->ATO = 0; - sdkp->first_scan = 1; - sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS; - - sd_revalidate_disk(gd); - - gd->flags = GENHD_FL_EXT_DEVT; - if (sdp->removable) { - gd->flags |= GENHD_FL_REMOVABLE; - gd->events |= DISK_EVENT_MEDIA_CHANGE; - gd->event_flags = DISK_EVENT_FLAG_POLL | DISK_EVENT_FLAG_UEVENT; - } - - blk_pm_runtime_init(sdp->request_queue, dev); - device_add_disk(dev, gd, NULL); - if (sdkp->capacity) - sd_dif_config_host(sdkp); - - sd_revalidate_disk(gd); - - if (sdkp->security) { - sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit); - if (sdkp->opal_dev) - sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n"); - } - - sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", - sdp->removable ? "removable " : ""); - scsi_autopm_put_device(sdp); - put_device(&sdkp->dev); -} - /** * sd_probe - called during driver initialization and whenever a * new scsi device is attached to the system. It is called once @@ -3404,8 +3342,50 @@ static int sd_probe(struct device *dev) get_device(dev); dev_set_drvdata(dev, sdkp); - get_device(&sdkp->dev); /* prevent release before async_schedule */ - async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain); + gd->major = sd_major((index & 0xf0) >> 4); + gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); + + gd->fops = &sd_fops; + gd->private_data = &sdkp->driver; + gd->queue = sdkp->device->request_queue; + + /* defaults, until the device tells us otherwise */ + sdp->sector_size = 512; + sdkp->capacity = 0; + sdkp->media_present = 1; + sdkp->write_prot = 0; + sdkp->cache_override = 0; + sdkp->WCE = 0; + sdkp->RCD = 0; + sdkp->ATO = 0; + sdkp->first_scan = 1; + sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS; + + sd_revalidate_disk(gd); + + gd->flags = GENHD_FL_EXT_DEVT; + if (sdp->removable) { + gd->flags |= GENHD_FL_REMOVABLE; + gd->events |= DISK_EVENT_MEDIA_CHANGE; + gd->event_flags = DISK_EVENT_FLAG_POLL | DISK_EVENT_FLAG_UEVENT; + } + + blk_pm_runtime_init(sdp->request_queue, dev); + device_add_disk(dev, gd, NULL); + if (sdkp->capacity) + sd_dif_config_host(sdkp); + + sd_revalidate_disk(gd); + + if (sdkp->security) { + sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit); + if (sdkp->opal_dev) + sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n"); + } + + sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", + sdp->removable ? "removable " : ""); + scsi_autopm_put_device(sdp); return 0; @@ -3441,7 +3421,6 @@ static int sd_remove(struct device *dev) scsi_autopm_get_device(sdkp->device); async_synchronize_full_domain(&scsi_sd_pm_domain); - async_synchronize_full_domain(&scsi_sd_probe_domain); device_del(&sdkp->dev); del_gendisk(sdkp->disk); sd_shutdown(dev); diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 60f01a7b728c..c2afba2a5414 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -3,12 +3,7 @@ * SCSI Enclosure Services * * Copyright (C) 2008 James Bottomley - * -**----------------------------------------------------------------------------- -** -** -**----------------------------------------------------------------------------- -*/ + */ #include #include diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index baada5b50bb1..e3266a64a477 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -228,7 +228,6 @@ static DEFINE_IDR(st_index_idr); -#include "osst_detect.h" #ifndef SIGS_FROM_OSST #define SIGS_FROM_OSST \ {"OnStream", "SC-", "", "osst"}, \ @@ -4267,9 +4266,10 @@ static int st_probe(struct device *dev) if (SDp->type != TYPE_TAPE) return -ENODEV; if ((stp = st_incompatible(SDp))) { - sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n"); sdev_printk(KERN_INFO, SDp, - "st: The suggested driver is %s.\n", stp); + "OnStream tapes are no longer supported;\n"); + sdev_printk(KERN_INFO, SDp, + "please mail to linux-scsi@vger.kernel.org.\n"); return -ENODEV; } diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index b89269120a2d..c2b6a0ca6933 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -375,6 +375,7 @@ enum storvsc_request_type { static int storvsc_ringbuffer_size = (128 * 1024); static u32 max_outstanding_req_per_channel; +static int storvsc_change_queue_depth(struct scsi_device *sdev, int queue_depth); static int storvsc_vcpus_per_sub_channel = 4; @@ -1699,6 +1700,7 @@ static struct scsi_host_template scsi_driver = { .dma_boundary = PAGE_SIZE-1, .no_write_same = 1, .track_queue_depth = 1, + .change_queue_depth = storvsc_change_queue_depth, }; enum { @@ -1905,6 +1907,15 @@ static int storvsc_probe(struct hv_device *device, return ret; } +/* Change a scsi target's queue depth */ +static int storvsc_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + if (queue_depth > scsi_driver.can_queue) + queue_depth = scsi_driver.can_queue; + + return scsi_change_queue_depth(sdev, queue_depth); +} + static int storvsc_remove(struct hv_device *dev) { struct storvsc_device *stor_device = hv_get_drvdata(dev); diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index b4d1b5c22987..ee4b1da1e223 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -3,6 +3,7 @@ * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. */ +#include #include #include #include @@ -161,6 +162,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) int err = 0; struct device *dev = host->hba->dev; + if (has_acpi_companion(dev)) + return 0; + err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk", &host->rx_l0_sync_clk, false); if (err) @@ -1127,9 +1131,13 @@ static int ufs_qcom_init(struct ufs_hba *hba) __func__, err); goto out_variant_clear; } else if (IS_ERR(host->generic_phy)) { - err = PTR_ERR(host->generic_phy); - dev_err(dev, "%s: PHY get failed %d\n", __func__, err); - goto out_variant_clear; + if (has_acpi_companion(dev)) { + host->generic_phy = NULL; + } else { + err = PTR_ERR(host->generic_phy); + dev_err(dev, "%s: PHY get failed %d\n", __func__, err); + goto out_variant_clear; + } } err = ufs_qcom_bus_register(host); @@ -1599,6 +1607,14 @@ static const struct of_device_id ufs_qcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); +#ifdef CONFIG_ACPI +static const struct acpi_device_id ufs_qcom_acpi_match[] = { + { "QCOM24A5" }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); +#endif + static const struct dev_pm_ops ufs_qcom_pm_ops = { .suspend = ufshcd_pltfrm_suspend, .resume = ufshcd_pltfrm_resume, @@ -1615,6 +1631,7 @@ static struct platform_driver ufs_qcom_pltform = { .name = "ufshcd-qcom", .pm = &ufs_qcom_pm_ops, .of_match_table = of_match_ptr(ufs_qcom_of_match), + .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), }, }; module_platform_driver(ufs_qcom_pltform); diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c index 8d9332bb7d0c..f478685122ff 100644 --- a/drivers/scsi/ufs/ufs-sysfs.c +++ b/drivers/scsi/ufs/ufs-sysfs.c @@ -122,7 +122,7 @@ static void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit) { unsigned long flags; - if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT)) + if (!ufshcd_is_auto_hibern8_supported(hba)) return; spin_lock_irqsave(hba->host->host_lock, flags); @@ -164,7 +164,7 @@ static ssize_t auto_hibern8_show(struct device *dev, { struct ufs_hba *hba = dev_get_drvdata(dev); - if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT)) + if (!ufshcd_is_auto_hibern8_supported(hba)) return -EOPNOTSUPP; return snprintf(buf, PAGE_SIZE, "%d\n", ufshcd_ahit_to_us(hba->ahit)); @@ -177,7 +177,7 @@ static ssize_t auto_hibern8_store(struct device *dev, struct ufs_hba *hba = dev_get_drvdata(dev); unsigned int timer; - if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT)) + if (!ufshcd_is_auto_hibern8_supported(hba)) return -EOPNOTSUPP; if (kstrtouint(buf, 0, &timer)) diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/scsi/ufs/ufs_bsg.c index 869e71f861d6..a9344eb4e047 100644 --- a/drivers/scsi/ufs/ufs_bsg.c +++ b/drivers/scsi/ufs/ufs_bsg.c @@ -122,7 +122,7 @@ static int ufs_bsg_request(struct bsg_job *job) memcpy(&uc, &bsg_request->upiu_req.uc, UIC_CMD_SIZE); ret = ufshcd_send_uic_cmd(hba, &uc); if (ret) - dev_dbg(hba->dev, + dev_err(hba->dev, "send uic cmd: error code %d\n", ret); memcpy(&bsg_reply->upiu_rsp.uc, &uc, UIC_CMD_SIZE); @@ -149,7 +149,9 @@ static int ufs_bsg_request(struct bsg_job *job) out: bsg_reply->result = ret; job->reply_len = sizeof(struct ufs_bsg_reply); - bsg_job_done(job, ret, bsg_reply->reply_payload_rcv_len); + /* complete the job here only if no error */ + if (ret == 0) + bsg_job_done(job, ret, bsg_reply->reply_payload_rcv_len); return ret; } diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index ffe6f82182ba..3b19de3ae9a3 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -200,6 +200,8 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = { static const struct pci_device_id ufshcd_pci_tbl[] = { { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { PCI_VDEVICE(INTEL, 0x9DFA), (kernel_ulong_t)&ufs_intel_cnl_hba_vops }, + { PCI_VDEVICE(INTEL, 0x4B41), (kernel_ulong_t)&ufs_intel_cnl_hba_vops }, + { PCI_VDEVICE(INTEL, 0x4B43), (kernel_ulong_t)&ufs_intel_cnl_hba_vops }, { } /* terminate list */ }; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 3fe3029617a8..04d3686511c8 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -3908,7 +3908,7 @@ static void ufshcd_auto_hibern8_enable(struct ufs_hba *hba) { unsigned long flags; - if (!(hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) || !hba->ahit) + if (!ufshcd_is_auto_hibern8_supported(hba) || !hba->ahit) return; spin_lock_irqsave(hba->host->host_lock, flags); @@ -5255,6 +5255,7 @@ static void ufshcd_err_handler(struct work_struct *work) goto skip_err_handling; } if ((hba->saved_err & INT_FATAL_ERRORS) || + (hba->saved_err & UFSHCD_UIC_HIBERN8_MASK) || ((hba->saved_err & UIC_ERROR) && (hba->saved_uic_err & (UFSHCD_UIC_DL_PA_INIT_ERROR | UFSHCD_UIC_DL_NAC_RECEIVED_ERROR | @@ -5414,6 +5415,23 @@ static void ufshcd_update_uic_error(struct ufs_hba *hba) __func__, hba->uic_error); } +static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba, + u32 intr_mask) +{ + if (!ufshcd_is_auto_hibern8_supported(hba)) + return false; + + if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK)) + return false; + + if (hba->active_uic_cmd && + (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER || + hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT)) + return false; + + return true; +} + /** * ufshcd_check_errors - Check for errors that need s/w attention * @hba: per-adapter instance @@ -5432,6 +5450,15 @@ static void ufshcd_check_errors(struct ufs_hba *hba) queue_eh_work = true; } + if (hba->errors & UFSHCD_UIC_HIBERN8_MASK) { + dev_err(hba->dev, + "%s: Auto Hibern8 %s failed - status: 0x%08x, upmcrs: 0x%08x\n", + __func__, (hba->errors & UIC_HIBERNATE_ENTER) ? + "Enter" : "Exit", + hba->errors, ufshcd_get_upmcrs(hba)); + queue_eh_work = true; + } + if (queue_eh_work) { /* * update the transfer error masks to sticky bits, let's do this @@ -5494,6 +5521,10 @@ static void ufshcd_tmc_handler(struct ufs_hba *hba) static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) { hba->errors = UFSHCD_ERROR_MASK & intr_status; + + if (ufshcd_is_auto_hibern8_error(hba, intr_status)) + hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status); + if (hba->errors) ufshcd_check_errors(hba); @@ -8313,7 +8344,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) UIC_LINK_HIBERN8_STATE); /* Set the default auto-hiberate idle timer value to 150 ms */ - if (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) { + if (ufshcd_is_auto_hibern8_supported(hba) && !hba->ahit) { hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 150) | FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3); } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index ecfa898b9ccc..994d73d03207 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -740,6 +740,11 @@ return true; #endif } +static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) +{ + return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT); +} + #define ufshcd_writel(hba, val, reg) \ writel((val), (hba)->mmio_base + (reg)) #define ufshcd_readl(hba, reg) \ diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 6fa889de5ee5..dbb75cd28dc8 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -144,8 +144,10 @@ enum { #define CONTROLLER_FATAL_ERROR 0x10000 #define SYSTEM_BUS_FATAL_ERROR 0x20000 -#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\ - UIC_HIBERNATE_EXIT |\ +#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT) + +#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\ UIC_POWER_MODE) #define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 13f1b3b9923a..1705398b026a 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -74,9 +74,6 @@ struct virtio_scsi { u32 num_queues; - /* If the affinity hint is set for virtqueues */ - bool affinity_hint_set; - struct hlist_node node; /* Protected by event_vq lock */ diff --git a/drivers/scsi/wd719x.c b/drivers/scsi/wd719x.c index c2f40068f235..edc8a139a60d 100644 --- a/drivers/scsi/wd719x.c +++ b/drivers/scsi/wd719x.c @@ -108,8 +108,15 @@ static inline int wd719x_wait_done(struct wd719x *wd, int timeout) } if (status != WD719X_INT_NOERRORS) { + u8 sue = wd719x_readb(wd, WD719X_AMR_SCB_ERROR); + /* we get this after wd719x_dev_reset, it's not an error */ + if (sue == WD719X_SUE_TERM) + return 0; + /* we get this after wd719x_bus_reset, it's not an error */ + if (sue == WD719X_SUE_RESET) + return 0; dev_err(&wd->pdev->dev, "direct command failed, status 0x%02x, SUE 0x%02x\n", - status, wd719x_readb(wd, WD719X_AMR_SCB_ERROR)); + status, sue); return -EIO; } @@ -128,8 +135,10 @@ static int wd719x_direct_cmd(struct wd719x *wd, u8 opcode, u8 dev, u8 lun, if (wd719x_wait_ready(wd)) return -ETIMEDOUT; - /* make sure we get NO interrupts */ - dev |= WD719X_DISABLE_INT; + /* disable interrupts except for RESET/ABORT (it breaks them) */ + if (opcode != WD719X_CMD_BUSRESET && opcode != WD719X_CMD_ABORT && + opcode != WD719X_CMD_ABORT_TAG && opcode != WD719X_CMD_RESET) + dev |= WD719X_DISABLE_INT; wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, dev); wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_2, lun); wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_3, tag); @@ -465,6 +474,7 @@ static int wd719x_abort(struct scsi_cmnd *cmd) spin_lock_irqsave(wd->sh->host_lock, flags); result = wd719x_direct_cmd(wd, action, cmd->device->id, cmd->device->lun, cmd->tag, scb->phys, 0); + wd719x_finish_cmd(scb, DID_ABORT); spin_unlock_irqrestore(wd->sh->host_lock, flags); if (result) return FAILED; @@ -477,6 +487,7 @@ static int wd719x_reset(struct scsi_cmnd *cmd, u8 opcode, u8 device) int result; unsigned long flags; struct wd719x *wd = shost_priv(cmd->device->host); + struct wd719x_scb *scb, *tmp; dev_info(&wd->pdev->dev, "%s reset requested\n", (opcode == WD719X_CMD_BUSRESET) ? "bus" : "device"); @@ -484,6 +495,12 @@ static int wd719x_reset(struct scsi_cmnd *cmd, u8 opcode, u8 device) spin_lock_irqsave(wd->sh->host_lock, flags); result = wd719x_direct_cmd(wd, opcode, device, 0, 0, 0, WD719X_WAIT_FOR_SCSI_RESET); + /* flush all SCBs (or all for a device if dev_reset) */ + list_for_each_entry_safe(scb, tmp, &wd->active_scbs, list) { + if (opcode == WD719X_CMD_BUSRESET || + scb->cmd->device->id == device) + wd719x_finish_cmd(scb, DID_RESET); + } spin_unlock_irqrestore(wd->sh->host_lock, flags); if (result) return FAILED; @@ -506,22 +523,23 @@ static int wd719x_host_reset(struct scsi_cmnd *cmd) struct wd719x *wd = shost_priv(cmd->device->host); struct wd719x_scb *scb, *tmp; unsigned long flags; - int result; dev_info(&wd->pdev->dev, "host reset requested\n"); spin_lock_irqsave(wd->sh->host_lock, flags); - /* Try to reinit the RISC */ - if (wd719x_chip_init(wd) == 0) - result = SUCCESS; - else - result = FAILED; + /* stop the RISC */ + if (wd719x_direct_cmd(wd, WD719X_CMD_SLEEP, 0, 0, 0, 0, + WD719X_WAIT_FOR_RISC)) + dev_warn(&wd->pdev->dev, "RISC sleep command failed\n"); + /* disable RISC */ + wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0); /* flush all SCBs */ list_for_each_entry_safe(scb, tmp, &wd->active_scbs, list) - wd719x_finish_cmd(scb, result); + wd719x_finish_cmd(scb, DID_RESET); spin_unlock_irqrestore(wd->sh->host_lock, flags); - return result; + /* Try to reinit the RISC */ + return wd719x_chip_init(wd) == 0 ? SUCCESS : FAILED; } static int wd719x_biosparam(struct scsi_device *sdev, struct block_device *bdev, @@ -673,7 +691,7 @@ static irqreturn_t wd719x_interrupt(int irq, void *dev_id) else dev_err(&wd->pdev->dev, "card returned invalid SCB pointer\n"); } else - dev_warn(&wd->pdev->dev, "direct command 0x%x completed\n", + dev_dbg(&wd->pdev->dev, "direct command 0x%x completed\n", regs.bytes.OPC); break; case WD719X_INT_PIOREADY: diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 181a32a6f391..685d771b51d4 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -152,22 +152,11 @@ static u32 iscsi_handle_authentication( if (strstr("None", authtype)) return 1; -#ifdef CANSRP - else if (strstr("SRP", authtype)) - return srp_main_loop(conn, auth, in_buf, out_buf, - &in_length, out_length); -#endif else if (strstr("CHAP", authtype)) return chap_main_loop(conn, auth, in_buf, out_buf, &in_length, out_length); - else if (strstr("SPKM1", authtype)) - return 2; - else if (strstr("SPKM2", authtype)) - return 2; - else if (strstr("KRB5", authtype)) - return 2; - else - return 2; + /* SRP, SPKM1, SPKM2 and KRB5 are unsupported */ + return 2; } static void iscsi_remove_failed_auth_entry(struct iscsi_conn *conn) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index b43d6385a1a0..04eda111920e 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1824,21 +1824,19 @@ static int tcmu_update_uio_info(struct tcmu_dev *udev) { struct tcmu_hba *hba = udev->hba->hba_ptr; struct uio_info *info; - size_t size, used; char *str; info = &udev->uio_info; - size = snprintf(NULL, 0, "tcm-user/%u/%s/%s", hba->host_id, udev->name, - udev->dev_config); - size += 1; /* for \0 */ - str = kmalloc(size, GFP_KERNEL); + + if (udev->dev_config[0]) + str = kasprintf(GFP_KERNEL, "tcm-user/%u/%s/%s", hba->host_id, + udev->name, udev->dev_config); + else + str = kasprintf(GFP_KERNEL, "tcm-user/%u/%s", hba->host_id, + udev->name); if (!str) return -ENOMEM; - used = snprintf(str, size, "tcm-user/%u/%s", hba->host_id, udev->name); - if (udev->dev_config[0]) - snprintf(str + used, size - used, "/%s", udev->dev_config); - /* If the old string exists, free it */ kfree(info->name); info->name = str; diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h index 9710254fd98c..e0a3423ba09e 100644 --- a/include/scsi/fc/fc_fip.h +++ b/include/scsi/fc/fc_fip.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2008 Cisco Systems, Inc. All rights reserved. - * - * This program is free software; you may redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. */ #ifndef _FC_FIP_H_ #define _FC_FIP_H_ diff --git a/include/scsi/fc/fc_ms.h b/include/scsi/fc/fc_ms.h index b1424dccf426..800d53dc9470 100644 --- a/include/scsi/fc/fc_ms.h +++ b/include/scsi/fc/fc_ms.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* * Copyright(c) 2011 Intel Corporation. All rights reserved. +/* + * Copyright(c) 2011 Intel Corporation. All rights reserved. * * Maintained at www.Open-FCoE.org */ diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 8b31588460d5..92b11c7e0b4f 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -5,8 +5,6 @@ * Copyright (C) 2005 Dmitry Yusupov * Copyright (C) 2005 Alex Aizman * maintained by open-iscsi@googlegroups.com - * - * See the file COPYING included with this distribution for more details. */ #ifndef ISCSI_IF_H diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index aeb4980745ca..b71b5c4f418c 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -5,8 +5,6 @@ * Copyright (C) 2005 Dmitry Yusupov * Copyright (C) 2005 Alex Aizman * maintained by open-iscsi@googlegroups.com - * - * See the file COPYING included with this distribution for more details. */ #ifndef ISCSI_PROTO_H diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index 172f15e3dfd6..7c8ba9d7378b 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -5,8 +5,6 @@ * Copyright (C) 2008 Mike Christie * Copyright (C) 2008 Red Hat, Inc. All rights reserved. * maintained by open-iscsi@googlegroups.com - * - * See the file COPYING included with this distribution for more details. */ #ifndef LIBISCSI_TCP_H diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index e9664bb7d188..4e2d61e8fb1e 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * SAS host prototypes and structures header file * @@ -207,8 +207,7 @@ struct sas_work { struct work_struct work; }; -/* Lots of code duplicates this in the SCSI tree, which can be factored out */ -static inline bool sas_dev_type_is_expander(enum sas_device_type type) +static inline bool dev_is_expander(enum sas_device_type type) { return type == SAS_EDGE_EXPANDER_DEVICE || type == SAS_FANOUT_EXPANDER_DEVICE; diff --git a/include/scsi/sas.h b/include/scsi/sas.h index 97a0f6bd201c..a5d8ae49198c 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * SAS structures and definitions header file * diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h index 0580dce280a1..a0458bda3148 100644 --- a/include/scsi/scsi_transport.h +++ b/include/scsi/scsi_transport.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Transport specific attributes. * diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 43f09c7c25a2..7db2dd783834 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -3,9 +3,6 @@ * FiberChannel transport specific attributes exported to sysfs. * * Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved. - * - * ======== - * * Copyright (C) 2004-2007 James Smart, Emulex Corporation * Rewrite for host, target, device, and remote port attributes, * statistics, and service functions... diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h index a81c53508cc6..76f627f0d13b 100644 --- a/include/uapi/scsi/fc/fc_els.h +++ b/include/uapi/scsi/fc/fc_els.h @@ -2,19 +2,6 @@ /* * Copyright(c) 2007 Intel Corporation. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * * Maintained at www.Open-FCoE.org */ diff --git a/include/uapi/scsi/fc/fc_fs.h b/include/uapi/scsi/fc/fc_fs.h index 8c0a292a61ed..0dab49dbb2f7 100644 --- a/include/uapi/scsi/fc/fc_fs.h +++ b/include/uapi/scsi/fc/fc_fs.h @@ -2,19 +2,6 @@ /* * Copyright(c) 2007 Intel Corporation. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * * Maintained at www.Open-FCoE.org */ diff --git a/include/uapi/scsi/fc/fc_gs.h b/include/uapi/scsi/fc/fc_gs.h index 2153f3524555..effb4c662fe5 100644 --- a/include/uapi/scsi/fc/fc_gs.h +++ b/include/uapi/scsi/fc/fc_gs.h @@ -2,19 +2,6 @@ /* * Copyright(c) 2007 Intel Corporation. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * * Maintained at www.Open-FCoE.org */ diff --git a/include/uapi/scsi/fc/fc_ns.h b/include/uapi/scsi/fc/fc_ns.h index 015e5e1ce8f1..4cf0a40a099a 100644 --- a/include/uapi/scsi/fc/fc_ns.h +++ b/include/uapi/scsi/fc/fc_ns.h @@ -2,19 +2,6 @@ /* * Copyright(c) 2007 Intel Corporation. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * * Maintained at www.Open-FCoE.org */ diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h index 62597d86beed..52f32a60d056 100644 --- a/include/uapi/scsi/scsi_bsg_fc.h +++ b/include/uapi/scsi/scsi_bsg_fc.h @@ -3,21 +3,6 @@ * FC Transport BSG Interface * * Copyright (C) 2008 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef SCSI_BSG_FC_H diff --git a/include/uapi/scsi/scsi_netlink.h b/include/uapi/scsi/scsi_netlink.h index 5ccc2333acab..5dd382054e45 100644 --- a/include/uapi/scsi/scsi_netlink.h +++ b/include/uapi/scsi/scsi_netlink.h @@ -4,21 +4,6 @@ * Used for the posting of outbound SCSI transport events * * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef SCSI_NETLINK_H #define SCSI_NETLINK_H diff --git a/include/uapi/scsi/scsi_netlink_fc.h b/include/uapi/scsi/scsi_netlink_fc.h index 060f563c38a2..a39023579051 100644 --- a/include/uapi/scsi/scsi_netlink_fc.h +++ b/include/uapi/scsi/scsi_netlink_fc.h @@ -3,21 +3,6 @@ * FC Transport Netlink Interface * * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef SCSI_NETLINK_FC_H #define SCSI_NETLINK_FC_H