mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-06 05:06:29 +00:00
gpio: mlxbf3: Add gpio driver support
Add support for the BlueField-3 SoC GPIO driver. This driver configures and handles GPIO interrupts. It also enables a user to manipulate certain GPIO pins via libgpiod tools or other kernel drivers. The usables pins are defined via the "gpio-reserved-ranges" property. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is contained in:
Asmaa Mnebhi
Bartosz Golaszewski
parent
8efe124702
commit
cd33f216d2
@ -1599,6 +1599,19 @@ config GPIO_MLXBF2
|
||||
help
|
||||
Say Y here if you want GPIO support on Mellanox BlueField 2 SoC.
|
||||
|
||||
config GPIO_MLXBF3
|
||||
tristate "Mellanox BlueField 3 SoC GPIO"
|
||||
depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST
|
||||
select GPIO_GENERIC
|
||||
select GPIOLIB_IRQCHIP
|
||||
help
|
||||
Say Y if you want GPIO support on Mellanox BlueField 3 SoC.
|
||||
This GPIO controller supports interrupt handling and enables the
|
||||
manipulation of certain GPIO pins.
|
||||
This controller should be used in parallel with pinctrl-mlxbf3 to
|
||||
control the desired GPIOs.
|
||||
This driver can also be built as a module called mlxbf3-gpio.
|
||||
|
||||
config GPIO_ML_IOH
|
||||
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
|
||||
depends on X86 || COMPILE_TEST
|
||||
|
||||
@ -104,6 +104,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
|
||||
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
|
||||
obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o
|
||||
obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o
|
||||
obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o
|
||||
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
|
||||
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
|
||||
obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o
|
||||
|
||||
248
drivers/gpio/gpio-mlxbf3.c
Normal file
248
drivers/gpio/gpio-mlxbf3.c
Normal file
@ -0,0 +1,248 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause
|
||||
/* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio/driver.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
/*
|
||||
* There are 2 YU GPIO blocks:
|
||||
* gpio[0]: HOST_GPIO0->HOST_GPIO31
|
||||
* gpio[1]: HOST_GPIO32->HOST_GPIO55
|
||||
*/
|
||||
#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32
|
||||
|
||||
/*
|
||||
* fw_gpio[x] block registers and their offset
|
||||
*/
|
||||
#define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x00
|
||||
#define MLXBF_GPIO_FW_DATA_OUT_SET 0x04
|
||||
|
||||
#define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00
|
||||
#define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x04
|
||||
|
||||
#define MLXBF_GPIO_CAUSE_RISE_EN 0x00
|
||||
#define MLXBF_GPIO_CAUSE_FALL_EN 0x04
|
||||
#define MLXBF_GPIO_READ_DATA_IN 0x08
|
||||
|
||||
#define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00
|
||||
#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14
|
||||
#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18
|
||||
|
||||
struct mlxbf3_gpio_context {
|
||||
struct gpio_chip gc;
|
||||
|
||||
/* YU GPIO block address */
|
||||
void __iomem *gpio_set_io;
|
||||
void __iomem *gpio_clr_io;
|
||||
void __iomem *gpio_io;
|
||||
|
||||
/* YU GPIO cause block address */
|
||||
void __iomem *gpio_cause_io;
|
||||
};
|
||||
|
||||
static void mlxbf3_gpio_irq_enable(struct irq_data *irqd)
|
||||
{
|
||||
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
|
||||
struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
|
||||
irq_hw_number_t offset = irqd_to_hwirq(irqd);
|
||||
unsigned long flags;
|
||||
u32 val;
|
||||
|
||||
gpiochip_enable_irq(gc, offset);
|
||||
|
||||
raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
|
||||
writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
|
||||
|
||||
val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
|
||||
val |= BIT(offset);
|
||||
writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
|
||||
raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
|
||||
}
|
||||
|
||||
static void mlxbf3_gpio_irq_disable(struct irq_data *irqd)
|
||||
{
|
||||
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
|
||||
struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
|
||||
irq_hw_number_t offset = irqd_to_hwirq(irqd);
|
||||
unsigned long flags;
|
||||
u32 val;
|
||||
|
||||
raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
|
||||
val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
|
||||
val &= ~BIT(offset);
|
||||
writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
|
||||
raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
|
||||
|
||||
gpiochip_disable_irq(gc, offset);
|
||||
}
|
||||
|
||||
static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr)
|
||||
{
|
||||
struct mlxbf3_gpio_context *gs = ptr;
|
||||
struct gpio_chip *gc = &gs->gc;
|
||||
unsigned long pending;
|
||||
u32 level;
|
||||
|
||||
pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0);
|
||||
writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
|
||||
|
||||
for_each_set_bit(level, &pending, gc->ngpio)
|
||||
generic_handle_domain_irq(gc->irq.domain, level);
|
||||
|
||||
return IRQ_RETVAL(pending);
|
||||
}
|
||||
|
||||
static int
|
||||
mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
|
||||
{
|
||||
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
|
||||
struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
|
||||
irq_hw_number_t offset = irqd_to_hwirq(irqd);
|
||||
unsigned long flags;
|
||||
u32 val;
|
||||
|
||||
raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
|
||||
|
||||
switch (type & IRQ_TYPE_SENSE_MASK) {
|
||||
case IRQ_TYPE_EDGE_BOTH:
|
||||
val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
|
||||
val |= BIT(offset);
|
||||
writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
|
||||
val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
|
||||
val |= BIT(offset);
|
||||
writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
|
||||
break;
|
||||
case IRQ_TYPE_EDGE_RISING:
|
||||
val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
|
||||
val |= BIT(offset);
|
||||
writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
|
||||
break;
|
||||
case IRQ_TYPE_EDGE_FALLING:
|
||||
val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
|
||||
val |= BIT(offset);
|
||||
writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
|
||||
break;
|
||||
default:
|
||||
raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
|
||||
|
||||
irq_set_handler_locked(irqd, handle_edge_irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* This function needs to be defined for handle_edge_irq() */
|
||||
static void mlxbf3_gpio_irq_ack(struct irq_data *data)
|
||||
{
|
||||
}
|
||||
|
||||
static const struct irq_chip gpio_mlxbf3_irqchip = {
|
||||
.name = "MLNXBF33",
|
||||
.irq_ack = mlxbf3_gpio_irq_ack,
|
||||
.irq_set_type = mlxbf3_gpio_irq_set_type,
|
||||
.irq_enable = mlxbf3_gpio_irq_enable,
|
||||
.irq_disable = mlxbf3_gpio_irq_disable,
|
||||
.flags = IRQCHIP_IMMUTABLE,
|
||||
GPIOCHIP_IRQ_RESOURCE_HELPERS,
|
||||
};
|
||||
|
||||
static int mlxbf3_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct mlxbf3_gpio_context *gs;
|
||||
struct gpio_irq_chip *girq;
|
||||
struct gpio_chip *gc;
|
||||
int ret, irq;
|
||||
|
||||
gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
|
||||
if (!gs)
|
||||
return -ENOMEM;
|
||||
|
||||
gs->gpio_io = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(gs->gpio_io))
|
||||
return PTR_ERR(gs->gpio_io);
|
||||
|
||||
gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1);
|
||||
if (IS_ERR(gs->gpio_cause_io))
|
||||
return PTR_ERR(gs->gpio_cause_io);
|
||||
|
||||
gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2);
|
||||
if (IS_ERR(gs->gpio_set_io))
|
||||
return PTR_ERR(gs->gpio_set_io);
|
||||
|
||||
gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3);
|
||||
if (IS_ERR(gs->gpio_clr_io))
|
||||
return PTR_ERR(gs->gpio_clr_io);
|
||||
gc = &gs->gc;
|
||||
|
||||
ret = bgpio_init(gc, dev, 4,
|
||||
gs->gpio_io + MLXBF_GPIO_READ_DATA_IN,
|
||||
gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET,
|
||||
gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR,
|
||||
gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET,
|
||||
gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0);
|
||||
|
||||
gc->request = gpiochip_generic_request;
|
||||
gc->free = gpiochip_generic_free;
|
||||
gc->owner = THIS_MODULE;
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq >= 0) {
|
||||
girq = &gs->gc.irq;
|
||||
gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip);
|
||||
girq->default_type = IRQ_TYPE_NONE;
|
||||
/* This will let us handle the parent IRQ in the driver */
|
||||
girq->num_parents = 0;
|
||||
girq->parents = NULL;
|
||||
girq->parent_handler = NULL;
|
||||
girq->handler = handle_bad_irq;
|
||||
|
||||
/*
|
||||
* Directly request the irq here instead of passing
|
||||
* a flow-handler because the irq is shared.
|
||||
*/
|
||||
ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler,
|
||||
IRQF_SHARED, dev_name(dev), gs);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "failed to request IRQ");
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, gs);
|
||||
|
||||
ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
|
||||
if (ret)
|
||||
dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = {
|
||||
{ "MLNXBF33", 0 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match);
|
||||
|
||||
static struct platform_driver mlxbf3_gpio_driver = {
|
||||
.driver = {
|
||||
.name = "mlxbf3_gpio",
|
||||
.acpi_match_table = mlxbf3_gpio_acpi_match,
|
||||
},
|
||||
.probe = mlxbf3_gpio_probe,
|
||||
};
|
||||
module_platform_driver(mlxbf3_gpio_driver);
|
||||
|
||||
MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver");
|
||||
MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
|
||||
MODULE_LICENSE("Dual BSD/GPL");
|
||||
Loading…
Reference in New Issue
Block a user