diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 58151ca56695..eb678fa5260a 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -17,13 +17,6 @@ config CPU_FREQ_CBE_PMI frequencies. Using PMI, the processor will not only be able to run at lower speed, but also at lower core voltage. -config CPU_FREQ_MAPLE - bool "Support for Maple 970FX Evaluation Board" - depends on PPC_MAPLE - help - This adds support for frequency switching on Maple 970FX - Evaluation Board and compatible boards (IBM JS2x blades). - config CPU_FREQ_PMAC bool "Support for Apple PowerBooks" depends on ADB_PMU && PPC32 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 0f184031dd12..1a8f787db7e2 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -92,7 +92,6 @@ obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o -obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c deleted file mode 100644 index 690da85c4865..000000000000 --- a/drivers/cpufreq/maple-cpufreq.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Dmitry Eremin-Solenikov - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt - * and Markus Demleitner - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table maple_cpu_freqs[] = { - {0, CPUFREQ_HIGH, 0}, - {0, CPUFREQ_LOW, 0}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int maple_pmode_cur; - -static const u32 *maple_pmode_data; -static int maple_pmode_max; - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int maple_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - maple_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - maple_pmode_cur = speed_mode; - ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int maple_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= maple_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Common interface to the cpufreq core - */ - -static int maple_cpufreq_target(struct cpufreq_policy *policy, - unsigned int index) -{ - return maple_scom_switch_freq(index); -} - -static unsigned int maple_cpufreq_get_speed(unsigned int cpu) -{ - return maple_cpu_freqs[maple_pmode_cur].frequency; -} - -static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - cpufreq_generic_init(policy, maple_cpu_freqs, 12000); - return 0; -} - -static struct cpufreq_driver maple_cpufreq_driver = { - .name = "maple", - .flags = CPUFREQ_CONST_LOOPS, - .init = maple_cpufreq_cpu_init, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = maple_cpufreq_target, - .get = maple_cpufreq_get_speed, - .attr = cpufreq_generic_attr, -}; - -static int __init maple_cpufreq_init(void) -{ - struct device_node *cpunode; - unsigned int psize; - unsigned long max_freq; - const u32 *valp; - u32 pvr_hi; - int rc = -ENODEV; - - /* - * Behave here like powermac driver which checks machine compatibility - * to ease merging of two drivers in future. - */ - if (!of_machine_is_compatible("Momentum,Maple") && - !of_machine_is_compatible("Momentum,Apache")) - return 0; - - /* Get first CPU node */ - cpunode = of_cpu_device_node_get(0); - if (cpunode == NULL) { - pr_err("Can't find any CPU 0 node\n"); - goto bail_noprops; - } - - /* Check 970FX for now */ - /* we actually don't care on which CPU to access PVR */ - pvr_hi = PVR_VER(mfspr(SPRN_PVR)); - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - pr_err("Unsupported CPU version (%x)\n", pvr_hi); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - /* - * On Maple this property is provided by PIBS in dual-processor config, - * not provided by PIBS in CPU0 config and also not provided by SLOF, - * so YMMV - */ - maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize); - if (!maple_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - maple_pmode_max = psize / sizeof(u32) - 1; - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - goto bail_noprops; - max_freq = (*valp)/1000; - maple_cpu_freqs[0].frequency = max_freq; - maple_cpu_freqs[1].frequency = max_freq/2; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - msleep(10); - maple_pmode_cur = -1; - maple_scom_switch_freq(maple_scom_query_freq()); - - pr_info("Registering Maple CPU frequency driver\n"); - pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - maple_cpu_freqs[1].frequency/1000, - maple_cpu_freqs[0].frequency/1000, - maple_cpu_freqs[maple_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&maple_cpufreq_driver); - -bail_noprops: - of_node_put(cpunode); - - return rc; -} - -module_init(maple_cpufreq_init); - - -MODULE_DESCRIPTION("cpufreq driver for Maple 970FX/970MP boards"); -MODULE_LICENSE("GPL");