For a fast look-up of a control element via either numid or name
matching (enabled via CONFIG_SND_CTL_FAST_LOOKUP), a locking isn't
needed at all thanks to Xarray. OTOH, the locking is still needed for
a slow linked-list traversal, and that's rather a rare case.
In this patch, we reduce the use of locking at snd_ctl_find_*() API
functions, and switch from controls_rwsem to controls_rwlock for
avoiding unnecessary lock inversions. This also resulted in a nice
cleanup, as *_unlocked() version of snd_ctl_find_*() APIs can be
dropped.
snd_ctl_find_id_mixer_unlocked() is still left just as an alias of
snd_ctl_find_id_mixer(), since soc-card.c has a wrapper and there are
several users. Once after converting there, we can remove it later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-3-tiwai@suse.de
We'll re-use the existing rwlock for the protection of control list
lookup, too, and now rename it to a more generic name.
This is a preliminary change, only the rename of the struct field
here, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-2-tiwai@suse.de
Now that all users of snd_print*() are gone, let's drop the functions
completely. This also makes CONFIG_SND_VERBOSE_PRINTK redundant, and
it's dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-55-tiwai@suse.de
Now all users of snd_device_intialize() are gone, let's drop it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Embedding the ctl_dev in the snd_card object may result in UAF when
the delayed kobj release is used; at the delayed kobj release, it
still accesses the struct device itself while the card memory (that
embeds the struct device) may be already gone.
As a workaround, detach the struct device from the card object by
allocating via the new snd_device_alloc() helper. The rest are just
replacing ctl_dev access to the pointer.
This is based on the fix Curtis posted initially. In this patch, the
changes are split and use the new helper function instead.
Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper, snd_device_alloc(), for allocating a struct
device that is bound with the sound class. It's a replacement of
snd_device_initialize().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: alsa-devel@alsa-project.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620175633.641141-2-gregkh@linuxfoundation.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 5bbb1ab5bd ("control: use counting semaphore as write lock
for ELEM_WRITE operation"), this has been locking the controls including
their values, not just the list of controls.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All callers from other files ignore the return value of this function.
And it can only ever return a non-zero value if the parameter card is NULL.
This cannot happen in snd_card_free() as card was dereferenced just before
snd_card_free_when_closed() is called. So the error handling can be dropped
there.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geoff Levand <geoff@infradead.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230207191907.467756-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All callers from other files ignore the return value of this function.
And it can only ever return a non-zero value if the parameter card is NULL.
Move the check for card being NULL into snd_card_free_when_closed() to keep
the previous behaviour. Note this isn't necessary for
snd_card_disconnect_sync() because if card was NULL in there the dereference
of card for dev_err() would oops the kernel. Replace this by an oops
triggered by the dereference of card for spin_lock_irq().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geoff Levand <geoff@infradead.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230207191907.467756-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.
As a temporary workaround, this patch provides the way to defer the
async signal notification in a work. The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively. In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.
Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The control elements are managed in a single linked list and we
traverse the whole list for matching each numid or ctl id per every
inquiry of a control element. This is OK-ish for a small number of
elements but obviously it doesn't scale. Especially the matching with
the ctl id takes time because it checks each field of the snd_ctl_id
element, e.g. the name string is matched with strcmp().
This patch adds the hash tables with Xarray for improving the lookup
speed of a control element. There are two xarray tables added to the
card; one for numid and another for ctl id. For the numid, we use the
numid as the index, while for the ctl id, we calculate a hash key.
The lookup is done via a single xa_load() execution. As long as the
given control element is found on the Xarray table, that's fine, we
can give back a quick lookup result. The problem is when no entry
hits on the table, and for this case, we have a slight optimization.
Namely, the driver checks whether we had a collision on Xarray table,
and do a fallback search (linear lookup of the full entries) only if a
hash key collision happened beforehand.
So, in theory, the inquiry for a non-existing element might take still
time even with this patch in a worst case, but this must be pretty
rare.
The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned
on as default. For simplicity, the option can be turned off only when
CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs").
Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de
Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/
Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a small helper function to handle the error path more easily
when an error happens during the probe for the device with the
device-managed card. Since devres releases in the reverser order of
the creations, usually snd_card_free() gets called at the last in the
probe error path unless it already reached snd_card_register() calls.
Due to this nature, when a driver expects the resource releases in
card->private_free, this might be called too lately.
As a workaround, one should call the probe like:
static int __some_probe(...) { // do real probe.... }
static int some_probe(...)
{
return snd_card_free_on_error(dev, __some_probe(dev, ...));
}
so that the snd_card_free() is called explicitly at the beginning of
the error path from the probe.
This function will be used in the upcoming fixes to address the
regressions by devres usages.
Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220412093141.8008-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a devres-supported helper for requesting an ISA DMA
channel that will be automatically freed at the device unbinding.
It'll be used by quite a few ISA sound drivers.
Link: https://lore.kernel.org/r/20210715075941.23332-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a second step for preliminary to widen the devres usages among
sound drivers, this patch adds a new ALSA core API function,
snd_devm_card_new(), to create a snd_card object via devres.
When a card object is created by this new function, snd_card_free() is
called automatically and the card object resource gets released at the
device unbinding time.
However, the story isn't that simple. A caveat is that we have to
call snd_card_free() at the very first of the whole resource release
procedure, in order to assure that the all exposed devices on
user-space are deleted and sync with processes accessing those devices
before releasing resources.
For achieving it, snd_card_register() adds a new devres action to
trigger snd_card_free() automatically when the given card object is a
"managed" one. Since usually snd_card_register() is the last step of
the initialization, this should work in most cases.
With all these tricks, some drivers can get rid of the whole driver
remove callback code.
About a bit of implementation details: the patch adds two new flags to
snd_card object: managed and releasing. The former indicates that the
object was created via snd_devm_card_new(), and the latter is used for
avoiding the double-free of snd_card_free() calls. Both flags are
fairly internal and likely uninteresting to normal users.
Link: https://lore.kernel.org/r/20210715075941.23332-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The power_state argument of snd_power_wait() is superfluous, receiving
only SNDRV_POWER_STATE_D0. Let's drop it in all callers for
simplicity.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210523090920.15345-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the power state check is performed in various places (e.g. at
the entrance of quite a few ioctls), there can be still some pending
tasks that already went into the ioctl handler or other ops, and those
may access the hardware even after the power state check. For
example, kcontrol access ioctl paths that call info/get/put callbacks
may update the hardware registers. If a system wants to assure the
free from such hw access (like the case of PCI rescan feature we're
going to implement in future), this situation must be avoided, and we
have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code:
- A refcount, power_ref, and a wait queue, power_ref_sleep, to the
card object
- A few new helpers, snd_power_ref(), snd_power_unref(),
snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the
power state with the newly introduced snd_power_ref_and_wait(). This
function also takes the card.power_ref refcount for tracking this
in-flight task. Once after the access finishes, snd_power_unref() is
called to released the refcount in return. So the driver can sync via
snd_power_sync_ref() assuring that all in-flight tasks have been
finished.
As of this patch, snd_power_sync_ref() is called only at
snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of
refcount_t. It's because of the design of refcount_t type; refcount_t
cannot be zero-based, and it cannot do dec_and_test() call for
multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only
SNDRV_CTL_POWER_D0, which is the only value that makes sense.
In later patch, the snd_power_wait() calls will be cleaned up.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need proper barriers to handle the power state change of the card
from different CPUs.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA control interface allows users to add arbitrary control elements
(called "user controls" or "user elements"), and its resource usage is
limited just by the max number of control sets (currently 32). This
limit, however, is quite loose: each allocation of control set may
have 1028 elements, and each element may have up to 512 bytes (ILP32) or
1024 bytes (LP64) of value data. Moreover, each control set may contain
the enum strings and TLV data, which can be up to 64kB and 128kB,
respectively. Totally, the whole memory consumption may go over 38MB --
it's quite large, and we'd rather like to reduce the size.
OTOH, there have been other requests even to increase the max number
of user elements; e.g. ALSA firewire stack require the more user
controls, hence we want to raise the bar, too.
For satisfying both requirements, this patch changes the management of
user controls: instead of setting the upper limit of the number of
user controls, we check the actual memory allocation size and set the
upper limit of the total allocation in bytes. As long as the memory
consumption stays below the limit, more user controls are allowed than
the current limit 32. At the same time, we set the lower limit (8MB)
as default than the current theoretical limit, in order to lower the
risk of DoS.
As a compromise for lowering the default limit, now the actual memory
limit is defined as a module option, 'max_user_ctl_alloc_size', so that
user can increase/decrease the limit if really needed, too.
Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.de
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210408103149.40357-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kernel-doc markups should use this format:
identifier - description
There is a common comment marked, instead, with kernel-doc
notation.
Some identifiers have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/535182d6f55d7a7de293dda9676df68f5f60afc6.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new small helper to get the current state of the device registration
for the given object. It'll be used for USB-audio driver to check the
delayed device registrations.
Link: https://lore.kernel.org/r/20200323170643.19181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, the available buffer allocation size for a PCM stream
depends on the preallocated size; when a buffer has been preallocated,
the max buffer size is set to that size, so that application won't
re-allocate too much memory. OTOH, when no preallocation is done,
each substream may allocate arbitrary size of buffers as long as
snd_pcm_hardware.buffer_bytes_max allows -- which can be quite high,
HD-audio sets 1GB there.
It means that the system may consume a high amount of pages for PCM
buffers, and they are pinned and never swapped out. This can lead to
OOM easily.
For avoiding such a situation, this patch adds the upper limit per
card. Each snd_pcm_lib_malloc_pages() and _free_pages() calls are
tracked and it will return an error if the total amount of buffers
goes over the defined upper limit. The default value is set to 32MB,
which should be really large enough for usual operations.
If larger buffers are needed for any specific usage, it can be
adjusted (also dynamically) via snd_pcm.max_alloc_per_card option.
Setting zero there means no chceck is performed, and again, unlimited
amount of buffers are allowed.
Link: https://lore.kernel.org/r/20200120124423.11862-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary patch to allow const for snd_device_ops
definitions in each driver's code. The ops reference is read-only,
hence it can be declared as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many PCI and other drivers performs snd_pcm_period_elapsed() simply in
its interrupt handler, so the sync_stop operation is just to call
synchronize_irq(). Instead of putting this call multiple times,
introduce the common card->sync_irq field. When this field is set,
PCM core performs synchronize_irq() for sync-stop operation. Each
driver just needs to copy its local IRQ number to card->sync_irq, and
that's all we need.
Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The snd_cards[] array holds the card pointers that have been currently
registered, and it's exported for the external modules that may need
to refer a card object. But accessing to this array can be racy
against the driver probe or removal, as the card registration or free
may happen concurrently.
This patch gets rid of the direct access to snd_cards[] array and
provides a helper function to give the card object from the index
number with a refcount management. Then the caller can access to the
given card object safely, and releases it via snd_card_unref().
While we're at it, add a proper comment to snd_card_unref() and make
it an inlined function for type-safety, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The creation of card's id proc file can be moved gracefully into
info.c. Also, the assignment of card->proc_id is superfluous and can
be dropped. So let's do it.
Basically this is no functional change but code refactoring, but one
potential behavior change is that now it returns properly the error
code from snd_info_card_register(), which is a good thing (tm).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 289ca025ee ("ALSA: Use priority list for managing device
list") changed the way to register/disconnect/free devices via a
single priority list. This helped to make behavior consistent, but it
also changed a slight behavior change: namely, the control device is
registered earlier than others, while it was supposed to be the very
last one.
I've put SNDRV_DEV_CONTROL in the current position as the release of
ctl elements often conflict with the private ctl elements some PCM or
other components may create, which often leads to a double-free.
But, the order of register and disconnect should be indeed fixed as
expected in the early days: the control device gets registered at
last, and disconnected at first.
This patch changes the priority list order to move SNDRV_DEV_CONTROL
as the last guy to assure the register / disconnect order. Meanwhile,
for keeping the messy resource release order, manually treat the
control and lowlevel devices as last freed one.
Additional note:
The lowlevel device is the device where a card driver creates at
probe. And, we still keep the release order control -> lowlevel, as
there might be link from a control element back to a lowlevel object.
Fixes: 289ca025ee ("ALSA: Use priority list for managing device list")
Reported-by: Tzung-Bi Shih <tzungbi@google.com>
Tested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case of user unbind ALSA driver during playing back / capturing,
each driver needs to stop and remove it correctly. One note here is
that we can't cancel from remove function in such case, because
unbind operation doesn't check return value from remove function.
So, we *must* stop and remove in this case.
For this purpose, we need to sync (= wait) until the all top-level
operations are canceled at remove function.
For example, snd_card_free() processes the disconnection procedure at
first, then waits for the completion. That's how the hot-unplug works
safely. It's implemented, at least, in the top-level driver removal.
Now for the lower level driver, we need a similar strategy. Notify to
the toplevel for hot-unplug (disconnect in ALSA), and sync with the
stop operation, then continue the rest of its own remove procedure.
This patch adds snd_card_disconnect_sync(), and driver can use it from
remove function.
Note: the "lower level" driver here refers to a middle layer driver
(e.g. ASoC components) that can be unbound freely during operation.
Most of legacy ALSA helper drivers don't have such a problem because
they can't be unbound.
Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect()
and syncs with closing all pending files. It takes only the files
opened by user-space into account, and doesn't care about object
refcounts. (The latter is handled by snd_card_free() completion call,
BTW.) Also, the function doesn't free resources by itself.
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually. But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.
This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change. Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At a previous commit, concurrent requests for TLV data are maintained
exclusively between read requests and write/command requests. TLV
callback handlers in each driver has no risk from concurrent access for
reference/change.
In current implementation, 'struct snd_card' has a mutex to control
concurrent accesses to user-defined element sets. This commit obsoletes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several lines in sound/core.h get the kernel-doc warnings like
./include/sound/core.h:323: warning: No description found for parameter '...'
where we use define like foo(x, args...) and "args" isn't mentioned in
the comments. As an easy workaround, use simple __VA_ARGS__ for VLA
in macros.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:
PCI-MSI 442368-edge snd_hda_intel:card1
PCI-MSI 49152-edge snd_hda_intel:card0
NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation. This can be used
generically for other drivers as well. The changes for others will
follow later -- tiwai
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since each proc entry is freed automatically by the parent, we don't
have to take care of its life cycle any longer. This allows us to
reduce a few more lines of codes.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Revive snd_device_disconnect() again so that it can be called from the
individual driver. This time, HD-audio will need it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For assigning sysfs entries for a card device from the driver,
introduce a new helper function, snd_card_add_dev_attr(). In this
way, we can avoid the possible race between the device registration
and the sysfs addition / removal.
The driver can pass a new attribute group to add freely. This has to
be called before snd_card_register().
Currently, up to two extra groups can be added. More than that, it'll
return an error.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the device is no longer hidden but embedded into each component,
we no longer need snd_get_device(). Let's drop it and relevant codes.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all callers have been replaced with
snd_device_register_for_dev(), let's drop the obsolete device
registration code and concentrate only on the code handling struct
device directly. That said,
- remove the old snd_device_register(),
- rename snd_device_register_for_dev() with snd_device_register(),
- drop superfluous arguments from snd_device_register(),
- change snd_unregister_device() to pass the device pointer directly
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch embeds a struct device for the control device into the card
object and avoid the device creation at registration time.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper function snd_device_initialize() to initialize
the device object for sound devices.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary patch for the further work on embedding struct
device into each sound device instance. It changes
snd_register_device*() helpers to receive the device object directly
for skipping creating a device there.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda codecs all use this struct and, with an HDA platform driver,
will be able to be built without PCI.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few code cleanups and optimizations. In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().
Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not. It's for better consistency. There should be
no impact for the current tree, as the state isn't checked.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Basically, the device type specifies the priority of the device to be
registered / freed, too. However, the priority value isn't well
utilized but only it's checked as a group. This results in
inconsistent register and free order (where each of them should be in
reversed direction).
This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value. Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.
The visible change to outside is that the priorities of some object
types are revisited. For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others. Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.
Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
