mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-29 17:25:38 +00:00
0172afefbf
1319091 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Thomas Gleixner
|
0172afefbf |
tracing: Record task flag NEED_RESCHED_LAZY.
The scheduler added NEED_RESCHED_LAZY scheduling. Record this state as part of trace flags and expose it in the need_resched field. Record and expose NEED_RESCHED_LAZY. [bigeasy: Commit description, documentation bits.] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20241122202849.7DfYpJR0@linutronix.de Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Linus Torvalds
|
06afb0f361 |
tracing updates for v6.13:
- Addition of faultable tracepoints There's a tracepoint attached to both a system call entry and exit. This location is known to allow page faults. The tracepoints are called under an rcu_read_lock() which does not allow faults that can sleep. This limits the ability of tracepoint handlers to page fault in user space system call parameters. Now these tracepoints have been made "faultable", allowing the callbacks to fault in user space parameters and record them. Note, only the infrastructure has been implemented. The consumers (perf, ftrace, BPF) now need to have their code modified to allow faults. - Fix up of BPF code for the tracepoint faultable logic - Update tracepoints to use the new static branch API - Remove trace_*_rcuidle() variants and the SRCU protection they used - Remove unused TRACE_EVENT_FL_FILTERED logic - Replace strncpy() with strscpy() and memcpy() - Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr() - Fix perf events to not duplicate samples when tracing is enabled - Replace atomic64_add_return(1, counter) with atomic64_inc_return(counter) - Make stack trace buffer 4K instead of PAGE_SIZE - Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used - Get the true return address for function tracer when function graph tracer is also running. When function_graph trace is running along with function tracer, the parent function of the function tracer sometimes is "return_to_handler", which is the function graph trampoline to record the exit of the function. Use existing logic that calls into the fgraph infrastructure to find the real return address. - Remove (un)regfunc pointers out of tracepoint structure - Added last minute bug fix for setting pending modules in stack function filter. echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter Would cause a kernel NULL dereference. - Minor clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz6dehQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlQsAP9aB0XGUV3UykvjZuKK84VDZ26a2hZH X2JDYsNA4luuPAEAz/BG2rnslfMZ04WTMAl8h1eh10lxcuHG0wQMHVBXIwI= =lzb5 -----END PGP SIGNATURE----- Merge tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Addition of faultable tracepoints There's a tracepoint attached to both a system call entry and exit. This location is known to allow page faults. The tracepoints are called under an rcu_read_lock() which does not allow faults that can sleep. This limits the ability of tracepoint handlers to page fault in user space system call parameters. Now these tracepoints have been made "faultable", allowing the callbacks to fault in user space parameters and record them. Note, only the infrastructure has been implemented. The consumers (perf, ftrace, BPF) now need to have their code modified to allow faults. - Fix up of BPF code for the tracepoint faultable logic - Update tracepoints to use the new static branch API - Remove trace_*_rcuidle() variants and the SRCU protection they used - Remove unused TRACE_EVENT_FL_FILTERED logic - Replace strncpy() with strscpy() and memcpy() - Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr() - Fix perf events to not duplicate samples when tracing is enabled - Replace atomic64_add_return(1, counter) with atomic64_inc_return(counter) - Make stack trace buffer 4K instead of PAGE_SIZE - Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used - Get the true return address for function tracer when function graph tracer is also running. When function_graph trace is running along with function tracer, the parent function of the function tracer sometimes is "return_to_handler", which is the function graph trampoline to record the exit of the function. Use existing logic that calls into the fgraph infrastructure to find the real return address. - Remove (un)regfunc pointers out of tracepoint structure - Added last minute bug fix for setting pending modules in stack function filter. echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter Would cause a kernel NULL dereference. - Minor clean ups * tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) ftrace: Fix regression with module command in stack_trace_filter tracing: Fix function name for trampoline ftrace: Get the true parent ip for function tracer tracing: Remove redundant check on field->field in histograms bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links bpf: decouple BPF link/attach hook and BPF program sleepable semantics bpf: put bpf_link's program when link is safe to be deallocated tracing: Replace strncpy() with strscpy() when copying comm tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL tracing: Fix syscall tracepoint use-after-free tracing: Introduce tracepoint_is_faultable() tracing: Introduce tracepoint extended structure tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT tracing: Replace multiple deprecated strncpy with memcpy tracing: Make percpu stack trace buffer invariant to PAGE_SIZE tracing: Use atomic64_inc_return() in trace_clock_counter() trace/trace_event_perf: remove duplicate samples on the first tracepoint event tracing/bpf: Add might_fault check to syscall probes tracing/perf: Add might_fault check to syscall probes tracing/ftrace: Add might_fault check to syscall probes ... |
||
Linus Torvalds
|
4b01712311 |
tracing/tools: Updates for 6.13
- Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for consistency - Remove unused sched_getattr define - Rename sched_setattr() helper to syscall_sched_setattr() to avoid conflicts - Update counters to long from int to avoid overflow - Add libcpupower dependency detection - Add --deepest-idle-state to timerlat to limit deep idle sleeps - Other minor clean ups and documentation changes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz5O/hQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qkLlAQDAJ0MASrdbJRDrLrfmKX6sja582MLe 3MvevdSkOeXRdQEA0tzm46KOb5/aYNotzpntQVkTjuZiPBHSgn1JzASiaAI= =OZ1w -----END PGP SIGNATURE----- Merge tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: - Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for consistency - Remove unused sched_getattr define - Rename sched_setattr() helper to syscall_sched_setattr() to avoid conflicts - Update counters to long from int to avoid overflow - Add libcpupower dependency detection - Add --deepest-idle-state to timerlat to limit deep idle sleeps - Other minor clean ups and documentation changes * tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: verification/dot2: Improve dot parser robustness tools/rtla: Improve exception handling in timerlat_load.py tools/rtla: Enhance argument parsing in timerlat_load.py tools/rtla: Improve code readability in timerlat_load.py rtla/timerlat: Do not set params->user_workload with -U rtla: Documentation: Mention --deepest-idle-state rtla/timerlat: Add --deepest-idle-state for hist rtla/timerlat: Add --deepest-idle-state for top rtla/utils: Add idle state disabling via libcpupower rtla: Add optional dependency on libcpupower tools/build: Add libcpupower dependency detection rtla/timerlat: Make timerlat_hist_cpu->*_count unsigned long long rtla/timerlat: Make timerlat_top_cpu->*_count unsigned long long tools/rtla: fix collision with glibc sched_attr/sched_set_attr tools/rtla: drop __NR_sched_getattr rtla: Fix consistency in getopt_long for timerlat_hist rv: Fix a typo tools/rv: Correct the grammatical errors in the comments tools/rv: Correct the grammatical errors in the comments rtla: use the definition for stdout fd when calling isatty() |
||
Linus Torvalds
|
f1db825805 |
trace ring-buffer updates for v6.13
- Limit time interrupts are disabled in rb_check_pages() The rb_check_pages() is called after the ring buffer size is updated to make sure that the ring buffer has not been corrupted. Commit |
||
Linus Torvalds
|
be4202228e |
- Add new infrastructure for reading TDX metadata
- Use the newly-available metadata to: - Disable potentially nasty #VE exceptions - Get more complete CPU topology information from the VMM -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmc9PCoACgkQaDWVMHDJ krDIjA//Wo2GVkPkviCdRxAsd0lWyKN52mVHPy1JAlT8H/idOpreMHod1Hn/Jga9 UqSH2lKZe1JM9KcyOW/1xTVxlJtYxj+aIbDkIVj4qk84e34yOXlJXvBiXbNgscSU ZWDN6C20LJuv5ZNb7rA1hGRrPlPS8C5g74oBWQX6qAhBCPS6n9ir0wgixZUwV4kw eH3QWyVzhNOKzKqGcHY4+DCe5odn8VDxGXtC97NNRzg1kfu4s0OaCF4EpCAOhZgA V/K7eFJQdRsnXtQ0eOq9O6l04cd6aqEyYp76Y6FL9Ztfno6P/YopmfVwXL1wYoHr aXO/Qi0km+Vz8xXr6blHC/s/amiLHxn6Ou1ZqUmniOcZiYva9GfyUoHttegH4IcV /kDfG52A5T1rREPwakYPTMUhan04nTk7rbjwyXbATyRtbKatl5bbsli4kw0T2R5P laCPabvXv3eeBCk+PYPnuVCstfpN5VsLr4VUz3wSMoIEbq3l4lvO/yKaok+KCtyD qQjk3H09GDvlR7gWB20Tg5ajyOeoK99gD3qwtXZ7APvvAQ9MewN+fgj2z5QPYnrd Bea88gjsSYbJ1RYG68c378rRI0uM6RKXjXu3wSro+QN2oTuE7jfNUh8/SiDi/Ssi fdYTFcrVLA3/b9dEqhCOSCVyEifgLMDorAODrdf0oJDuCpeoa4E= =NIl1 -----END PGP SIGNATURE----- Merge tag 'x86_tdx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull tdx updates from Dave Hansen: "These essentially refine some interactions between TDX guests and VMMs. The first leverages a new TDX module feature to runtime disable the ability for a VM to inject #VE exceptions. Before this feature, there was only a static on/off switch and the guest had to panic if it was configured in a bad state. The second lets the guest opt in to be able to access the topology CPUID leaves. Before this, accesses to those leaves would #VE. For both of these, it would have been nicest to just change the default behavior, but some pesky "other" OSes evidently need to retain the legacy behavior. Summary: - Add new infrastructure for reading TDX metadata - Use the newly-available metadata to: - Disable potentially nasty #VE exceptions - Get more complete CPU topology information from the VMM" * tag 'x86_tdx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tdx: Enable CPU topology enumeration x86/tdx: Dynamically disable SEPT violations from causing #VEs x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() x86/tdx: Introduce wrappers to read and write TD metadata |
||
Linus Torvalds
|
5af5d43f84 |
- Rework some CPU setup code to keep LLVM happy on 32-bit
- Correct RSB terminology in Kconfig text -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmc9OLoACgkQaDWVMHDJ krDIwA/5AcBevnfyIzDdMMnUJMFt5ppTqkzDVevdPh9d2Q07DxsHWzX9KCyKm1e3 +E4FNfzg3JMJ3PmYnHLlhX78g5pYgDzmGVftfU5AmlQLeqZamgZKreyhEBIYZNkd CsgmZRBx2SmMfsThwAF+EFbi2Lysqgt1PceGNawVYjNQiv1qS7p091V0q3gqOTAf rr/LfiPfPe3nfGTW1CFqDPI9u8fsa87nelykp8/E0ZbOpIEecOAke8SkpjCpSORP zthUH4/UzUPuVTKiBztfM9HATqTWuRaGGyklFszFHHwLd/XZhsIKNQ/ptpl0qHIr d8f6LIrBPG/4Nyovjk6AYfs3NSc22tZngRbkN6DbaYtx7Io1lUJItd/ZIIuYVBs8 MQgdmNkf6XU3WzkcCY7sT5WdXFOB95wi6TFdv33xRGmTovbothT5uJJHivotuOvZ lH9ym7WQANZ0ggvSh5Y4bzk6OyUE74POZ332c4c+F6nXlG9NkSEzWUVyaJMQ6yMD bPkdlxEZGF17xAm5VXT9qFmH6IClZL4j7G+Jh3GjvdGm3FO/pp1w5AkC8G7otQ7x b1TFBMeS7xkVvOPAMzwzezU8DsXT/jJGleSuLNN7YI5rzDCAw6/TyJjlWVOW1khr mV6xuhjb8P1ku5L+/nI5ghxQcgM8+HxN10/Gg4HQsXmsk17vtKk= =02xm -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Dave Hansen: "As usual for this branch, these are super random: a compile fix for some newish LLVM checks and making sure a Kconfig text reference to 'RSB' matches the normal definition: - Rework some CPU setup code to keep LLVM happy on 32-bit - Correct RSB terminology in Kconfig text" * tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Make sure flag_is_changeable_p() is always being used x86/bugs: Correct RSB terminology in Kconfig |
||
Linus Torvalds
|
be9318cd5a |
- Use vmalloc_array() instead of vmalloc()
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmc9NkQACgkQaDWVMHDJ krCs8g//dtj6LVV+RqAh62Xg3lwIJX3aGfjCJ3sZR22l8sE63FIdHKulmXVOtwUi b7APij265sYJwsPQQyD+3TXaR2oDM5SJ3ms/JAi0NiJ80sH7Vl8+wpk4KdKDoFNr CvK4cHpjfn05KuMCDT0pOmJui+aiOdMTdrrIvZhJY7C1hHTKrSS4Vvte2MweuQWf p40FvF3PIH3fHoB1jiXsgN06LsVv07hwZxbahVqopQT0uQmyTpOx2tzJ4Vq9emjd e3xPw4EWP65OF4YTnYBtTOcGPk9HwKLyiNejtou1NNPIXSSqFSMIZQRgEMQqricf y+ptxGB932VE8Zi6ys07dAuDbzTDh0J32ly6NxdnZ2aTSumZwz35WnpfgrKXBrAc gHxYWgaM9ou8ctIOX5DWm5NCNUBXMh42OQ1aS458DTMsFmQ/GTBgywaU8BVjrtVW NTCJg5E1JefkRRzORhEksJUByW+HRL6zPf3kPBZAaMF55cIWowaZU0TuNiI9J2Gf 42Bw0Jv3YGWDrfaBi6sN4eVXfIKfRine3hrEriKemyP2zUyHR3DPBkYF06dQN8M8 vXchAORRo2uGmmtFO2ACjmIsFMDrgj/O3QfMmcOo6ApLRN1QRhWhC3kd2yJnjSYK LR7eFjPlUMvqcAJW6igXaQVfNxHk04rMK0GoWZ7cplqNhS/zcYw= =grp1 -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sgx update from Dave Hansen: - Use vmalloc_array() instead of vmalloc() * tag 'x86_sgx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Use vmalloc_array() instead of vmalloc() |
||
Linus Torvalds
|
563cb0b1e7 |
cxl changes for v6.13
- Constify range_contains() input parameters to prevent changes. - Add support for displaying RCD capabilities in sysfs to support lspci for CXL device. - Downgrade warning message to debug in cxl_probe_component_regs(). - Add support for adding a printf specifier '$pra' to emit 'struct range' content. - Add sanity tests for 'struct resource'. - Add documentation for special case. - Add %pra for 'struct range'. - Add %pra usage in CXL code. - Add preparation code for DCD support - Add range_overlaps(). - Add CDAT DSMAS table shared and read only flag in ACPICA. - Add documentation to 'struct dev_dax_range'. - Delay event buffer allocation in CXL PCI code until needed. - Use guard() in cxl_dpa_set_mode(). - Refactor create region code to consolidate common code. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmc84dMACgkQYGjFFmlT OEoGTg//cSJlQ9X7+xZDbngnzpJwcLzQkR/FXDfe3obtmgs7woDJgNNcYnKSlgyf wal47Q0UM/1Hv8Dtfrt62Ay1fmOvDL2GSpey35NVJGCEpIsfOqqk1zTCgfgwRHTO MZJLnOSFUIlDYlVz8ljLNHnNqPjr7dCoUh9tdBefvkw59FqbkHNcWI8hG1lh1SR4 2frtJcqVg54S6vJa2eeWmNVpxz7RZvPFrb8TJzhdrGM8PkTMNFA2oJINAf0j00Ev 8/T6HXTxXvFtNhBH0dtMO1MFh1d6Qr/zFnX/gmrnPWl1l/12HFDMBIZIzq/Whjpo +7hQ5xK3cwkMevFgFrAhwdZMj8maR84x1dbFItoThaoeDIQ4sGfyQEMPsbkZP/Sc 67i5hQFIBZc+ORLB0W+z9Da52ZFGyVw/xsCmDRzXCw4s7N2twpydIoA7Pvu9NN1X 3JVF35NrsRZ+PyuGWEitNjo0Rj6swNpBC5Xv/T1mgFtSgvVuk1T2QtSHJcPoQyzQ zbijsCKmvJYbdJBnPiotdrBs1BUxBsP9dBT9IxWzMy6lcEpTJrYpUheRCk2tSHFa Kk8O8IYNiBKZaSpN9UHKaGzr43H8gNbLf4svSIiu1lZJTSSdtWqfZZYjXFBgB1Vb l2gBCDmPJ0y7WKZSCa53UmQiOusr+l3Pi+OflZEfCy6JxbSqTTM= =GNlu -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl updates from Dave Jiang: - Constify range_contains() input parameters to prevent changes - Add support for displaying RCD capabilities in sysfs to support lspci for CXL device - Downgrade warning message to debug in cxl_probe_component_regs() - Add support for adding a printf specifier '%pra' to emit 'struct range' content: - Add sanity tests for 'struct resource' - Add documentation for special case - Add %pra for 'struct range' - Add %pra usage in CXL code - Add preparation code for DCD support: - Add range_overlaps() - Add CDAT DSMAS table shared and read only flag in ACPICA - Add documentation to 'struct dev_dax_range' - Delay event buffer allocation in CXL PCI code until needed - Use guard() in cxl_dpa_set_mode() - Refactor create region code to consolidate common code * tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/region: Refactor common create region code cxl/hdm: Use guard() in cxl_dpa_set_mode() cxl/pci: Delay event buffer allocation dax: Document struct dev_dax_range ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values range: Add range_overlaps() cxl/cdat: Use %pra for dpa range outputs printf: Add print format (%pra) for struct range Documentation/printf: struct resource add start == end special case test printf: Add very basic struct resource tests cxl: downgrade a warning message to debug level in cxl_probe_component_regs() cxl/pci: Add sysfs attribute for CXL 1.1 device link status cxl/core/regs: Add rcd_pcie_cap initialization kernel/range: Const-ify range_contains parameters |
||
Linus Torvalds
|
28eb75e178 |
drm for 6.13-rc1
core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+ -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmc+efwACgkQDHTzWXnE hr6Dyg/9HVVI3lxuWAz9MEt3w+BON5KTJAxg5Zhvc5DwiUbDXghu8sfkUfanDWS5 /MqyPqLt5srXrtKTRDnzEI0Vf8YHeiDEcaydjpshEpCfteHZ7SADpvem8fp6/otV iYt8U6tMcGe9I+M2kwDkOTrKJIiyCKPi5hfBIAkxEAh6806ifPRtLkeMGbaSwBxH x6kZTE9ygGWAY7bAgbmVmm3JwrXG9mYDl9dW3cbi9gZ6PGAXHPZRUPvZoHhvfC2A UVgROH76Spm4rdWYGI3azj+gW3HsdGgUHcysb+lu37i261E+sT7kuV2UYtnOMzr5 igO1RlQ+rcfPYLG4n+oNXDMu5d1OQXELrlQzXptym4Konpd7b/GSeVctWV0wHWuv nG8g7DWAFFnLAdeWqLZpf1Brze33h5+572D3BioWB4LYSEATjwoTwcBKsdRuc4Wk RHxjumCidybTdo/8EB1ElGlH39m/mDQA0scMlVhS/BuiIssfgcBRfltI8S3HzHcW YQYq6xH7F9E3shs3/TYbWR4clm66ZTnZV6ClDfGJolzyF/hbV0rsbeSpDelpooE8 1Js7KuwVa+HvA4jtupY9vqxMTdXWwoGPfuUgKpOAreYibnd1T9Q1zVme/B1bUH05 518IjiMGCxDnBvFWaPT9DcX4zg7pS3yzjw3hGkdz3reUqat0Gy8= =8cUI -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ... |
||
Linus Torvalds
|
071b34dcf7 |
sound updates for 6.13-rc1
This is a relatively calm cycle, and majority of changes are about ASoC. There are little changes in the core side but we received lots of new drivers for new vendors. * ALSA Core: - The new accel operation mode for compress-offload API; only the core part, and the actual user will follow at next * ASoC: - Continued API simplification works - Renaming of the sh directory to Renesas - Factoring out of some of the common code for Realtek devices - Ussal ASoC Intel SOF, AMD and SoundWire updates - Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081, Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25 * HD- and USB-audio: - Clean up of IRQ handling in legacy HD-audio driver - Fix soft lockup at disconnection of non-standard USB drivers - Scarlett2 mixer improvements - New quirks and cleanups in HD- and USB-audio -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmc9yFUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8IMxAAoagGD3lQXQl6c7yoe0BATApiW71itLHP05SA KzVCeWtMMeROov9cWgzIJMqbj4d6fs/zxomYjYHzb+3IlTtMVkV+PWEIgtr0xck4 WRPj9V3vb68+S6tFlVrmsv4LwdWfwPwUgLJpvXZM/aFUxa+8i0lb2/g8yKPYvser dfqU1Uwi7fn3txTQiFiI61Hx7Nn3ISUhVpY3DwZTHYuLaRNfJOR0HdJTrlehnYZG KmvTg2WnYud687yEMC5AV1WTItoUUhMkuPGbpxWxGwk8bOfkbxKNh/EgNOO2Hubz E8RgYtCaq2TA0OS5YdY6Mk9blG7snOZW3pMULm1kFuLr1BD7JGz2Q5duoX6NyrrS gqzXPxPYCCCkLLkS672HMy9UzhM3j03LrgT1JxV3wbUMZoJWjD0zn1Tfv6WJ1M7g CZsjaZrqATK8bexM8QrdKSZcZOB7B3ZX0hNyx/SKXycuvg8jC8evm/qfAPKvU79O B3vivSs/YgquR62R8dp6OJQ75C3IVLv9PrLbS/RXrOgzx2hRZFG5/PWKr+pC5zIp T8qdBPuQ/f/gzbIgGkL2sRYYWGL+tg+hlD2CA5jP47DoUwcdxm15AK4Gv1qqJgFr QCmg3WuipUumJqyMcSKdyVqUytIeCBFTZqM1PUsehfdueeRkp0ZgV6hDDc+jSjWm fjycRuw= =gOHc -----END PGP SIGNATURE----- Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is a relatively calm cycle, and majority of changes are about ASoC. There are little changes in the core side but we received lots of new drivers for new vendors. ALSA Core: - The new accel operation mode for compress-offload API; only the core part, the actual user will follow later ASoC: - Continued API simplification works - Renaming of the sh directory to Renesas - Factoring out of some of the common code for Realtek devices - Ussal ASoC Intel SOF, AMD and SoundWire updates - Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081, Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25 HD- and USB-audio: - Clean up of IRQ handling in legacy HD-audio driver - Fix soft lockup at disconnection of non-standard USB drivers - Scarlett2 mixer improvements - New quirks and cleanups in HD- and USB-audio" * tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits) ALSA: hda: Poll jack events for LS7A HD-Audio ASoC: hdmi-codec: reorder channel allocation list ALSA: ump: Fix the wrong format specifier ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support ASoC: stm32: dfsdm: change rate upper limits ASoC: sma1307: fix uninitialized variable refence ASoC: dt-bindings: simple-mux: add idle-state property ASoc: simple-mux: add idle-state support ASoC: sdca: test adev before calling acpi_dev_for_each_child ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform ASoC: amd: acp: add soundwire machine driver for legacy stack ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file ASoC: amd: ps: add soundwire machines for acp6.3 platform ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform ASoC: amd: acp: add rt722 based soundwire machines ALSA: compress_offload: Add missing descriptions in structs ALSA: 6fire: Release resources at card release ALSA: caiaq: Use snd_card_free_when_closed() at disconnection ALSA: us122l: Drop mmap_count field ... |
||
Linus Torvalds
|
55ae3eef10 |
i2c-for-6.13-rc1
i2c-core (Wolfram) - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... i2c-host updates (Andi) Major Improvements and Refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback. - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver. - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF). - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4. New Features: - i2c-cadence added support for atomic transfers. - Qualcomm CII added support for a 32MHz serial engine clock. Deprecated Features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New Hardware Support: - Added support for: - Intel Panther Lake (new ID) - AMD ASF (new driver) - S32G2/S32G3 SoCs (new ID) - Realtek RTL I2C Controller (new driver) - HJMC01 DesignWare ACPI HID (new ID) - PIC64GX to Microchip Core (new ID) - Qualcomm SDM670 to Qualcomm CCI (new ID) at24 updates (Bartosz) - add support for the lockable page on ST M24256E -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmc+/UUACgkQFA3kzBSg KbZrqA/+MqNiN8NIkgA3nIODQP1Cf/aUhywHITsRgoo85vVDHeiaJtKc25KMi6Tb I5GgHp9Q0TtYdXzKM+nC7xjO64h8obGRXPHv5fDbRAZlFbWSR8u+iQp9entuVJe4 TiRFh9M8chAC82QNCvYVKx3jTHlmZaR7bXDtoAf7bG0LdWnjey1JSFfn6cPweVNM 0sD95tjBDb53tCRPGVKrCsnrs5uGxugGvH5I16hB6iokbaiIlGosIBg/8YBGHCS8 V8RqLSfzCl7X7xICeRv2ttRWx78Nz38RBC+truR5OEvvdZ+J2UCZ0710/w6FWfPp F85ReZrG5bh49Jobt/AyC7VXqL6djg+C6jVU1rX8Eb3G6TapL4iCJe9CcI4EXANY 1mtzZ8fqg4EaVMVRQx3tiyjNFWQba9ssSyzRB8ZfCqmS6xV2HXJby3zNoDA9SoxH tNn3vp0FfOtdn4lGbYAJE4zUMupXiUkrgswj5sKltYjXh/OmaDLJfYeFhPp+SwvW uWuLZveM0mAn6BWyM4g9v6MIHWiUumkF5xwlAfNOh3ogxqUtAPtbzk7FQ332ni0Z X11J5EOBzbMQR24moRo7xtQSdoDDSQDpytOVXTY2QWv3rZuk0oVL57aifJdtTkrK QktmylTfYlfI2hWLRoWFJ1j7nQyBveiNHh/qq0hxCkXLP3vA5gs= =lrn5 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Core: - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... Host improvements and refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF) - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4 New host features: - i2c-cadence support for atomic transfers - Qualcomm CII support for a 32MHz serial engine clock Deprecated features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New hardware IDs for existing drivers: - Intel Panther Lake - S32G2/S32G3 SoCs - HJMC01 DesignWare ACPI HID - PIC64GX to Microchip Core - Qualcomm SDM670 to Qualcomm CCI New drivers: - AMD ASF - Realtek RTL I2C Controller at24 updates: - add support for the lockable page on ST M24256E" * tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits) docs: i2c: piix4: Add ACPI section i2c: Add driver for the RTL9300 I2C controller i2c: qcom-cci: Remove unused struct member cci_clk_rate dt-bindings: i2c: Add Realtek RTL I2C Controller i2c: busses: Use *-y instead of *-objs in Makefile i2c: imx: add support for S32G2/S32G3 SoCs dt-bindings: i2c: imx: add SoC specific compatible strings for S32G i2c: qcom-cci: Remove the unused variable cci_clk_rate i2c: Drop legacy muxing pseudo-drivers i2c: imx: prevent rescheduling in non dma mode i2c: imx: separate atomic, dma and non-dma use case i2c: imx: do not poll for bus busy in single master mode i2c: designware: Add a new ACPI HID for HJMC01 I2C controller i2c: qcom-geni: Keep comment why interrupts start disabled dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver i2c: designware: constify abort_sources i2c: Switch back to struct platform_driver::remove() i2c: qcom-geni: Support systems with 32MHz serial engine clock i2c: qcom-cci: Stop complaining about DT set clock rate dt-bindings: i2c: qcom-cci: Document SDM670 compatible ... |
||
Linus Torvalds
|
341d041daa |
iommufd 6.13 merge window pull
Several new features and uAPI for iommufd: - IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing memory for an iommu mapping. To date VFIO/iommufd have used VMA's and pin_user_pages(), this now allows using memfds and memfd_pin_folios(). Notably this creates a pure folio path from the memfd to the iommu page table where memory is never broken down to PAGE_SIZE. - IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two processes. Combined with the above this allows iommufd to support a VMM re-start using exec() where something like qemu would exec() a new version of itself and fd pass the memfds/iommufd/etc to the new process. The memfd allows DMA access to the memory to continue while the new process is getting setup, and the CHANGE_PROCESS updates all the accounting. - Support for fault reporting to userspace on non-PRI HW, such as ARM stall-mode embedded devices. - IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual iommu. This will be used by VMMs to access hardware features that are contained with in a VM. The first use is to inform the kernel of the virtual SID to physical SID mapping when issuing SID based invalidation on ARM. Further uses will tie HW features that are directly accessed by the VM, such as invalidation queue assignment and others. - IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual device to physical device within a VIOMMU. Minimially this is used to translate VM issued cache invalidation commands from virtual to physical device IDs. - Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with the VIOMMU - ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE the driver can model this HW's behavior for nested translation. This includes a shared branch from Will. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZzzKKwAKCRCFwuHvBreF YaCMAQDOQAgw87eUYKnY7vFodlsTUA2E8uSxDmk6nPWySd0NKwD/flOP85MdEs9O Ot+RoL4/J3IyNH+eg5kN68odmx4mAw8= =ec8x -----END PGP SIGNATURE----- Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Several new features and uAPI for iommufd: - IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing memory for an iommu mapping. To date VFIO/iommufd have used VMA's and pin_user_pages(), this now allows using memfds and memfd_pin_folios(). Notably this creates a pure folio path from the memfd to the iommu page table where memory is never broken down to PAGE_SIZE. - IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two processes. Combined with the above this allows iommufd to support a VMM re-start using exec() where something like qemu would exec() a new version of itself and fd pass the memfds/iommufd/etc to the new process. The memfd allows DMA access to the memory to continue while the new process is getting setup, and the CHANGE_PROCESS updates all the accounting. - Support for fault reporting to userspace on non-PRI HW, such as ARM stall-mode embedded devices. - IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual iommu. This will be used by VMMs to access hardware features that are contained with in a VM. The first use is to inform the kernel of the virtual SID to physical SID mapping when issuing SID based invalidation on ARM. Further uses will tie HW features that are directly accessed by the VM, such as invalidation queue assignment and others. - IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual device to physical device within a VIOMMU. Minimially this is used to translate VM issued cache invalidation commands from virtual to physical device IDs. - Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with the VIOMMU - ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE the driver can model this HW's behavior for nested translation. This includes a shared branch from Will" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits) iommu/arm-smmu-v3: Import IOMMUFD module namespace iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest iommufd: Add IOMMU_IOAS_CHANGE_PROCESS iommufd: Lock all IOAS objects iommufd: Export do_update_pinned iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Use S2FWB for NESTED domains iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC Documentation: userspace-api: iommufd: Update vDEVICE iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command iommufd/selftest: Add mock_viommu_cache_invalidate iommufd/viommu: Add iommufd_viommu_find_dev helper iommu: Add iommu_copy_struct_from_full_user_array helper iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE iommu/viommu: Add cache_invalidate to iommufd_viommu_ops iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl ... |
||
Linus Torvalds
|
51ae62a12c |
dma-mapping updates for Linux 6.13
- improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8xN8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNwEBAAtd0zTiNuEUklY6YtZ7l/Zaudibmq1klHLGAQZEa9 J4P2zzJ6xTkUblq/aVmFUQmf+vuuszjHIrrXnL3tAulSQKxS5Zj3Cci4cW4IAfBn GXB3OTR2lgXSk+8sulgiwc1AA8xgIFJJgZDTni1WdiW9LwLvUyYI1XNVAwCYOM2J HS2QxIySm3eg23F5bRz+Xl3LQlWYlHkMHryqKloHWIqchmVpYlYbj7uBMjAH4FKz l3zhd9pZSp9w5NNCp2Y/d81XdOUSjcYSR1gUotLzmW0Sj3YjnKXKdjjlPrj3zimb 9EhgdalnpVrJ4Nr7MmpSUEbTVs+hBjXDoxTnnBRlKEl5aIKqceCrSBvoP70ygbkf KRqNS4ZxKe59cfnWAZQVcg8g01TetCoJR6QyGaoTE9Lz+9cPl2xAwyFmcYN2w/Cp qs0ZEFiNpqLAN5zwR/Pakz5YgIA/3N5MW0d9X9yEH9l4+HUMxWIF/qvThBSsGswT EmVUQqPpEzGJrcNYgC1UsEBltGmle02BwcoFEdMr7bzldW7yIpoDEOkKkBM3JFF9 vgkpAkZGA5j4VMSkSwOrhi1rI0XAoImtJeM0wqhLtpXgQDjrMd3DaW6by6uUeH5x DcXf6qVOAsB04je9JkHh9I4BXVrWC01MSgFdjfQRl9gktn7970YFswG4ksYAwxU6 xHQ= =ivZc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) * tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: save base/size instead of pointer to shared DMA pool dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err dma-mapping: drop unneeded includes from dma-mapping.h dma-mapping: trace more error paths dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map dma-mapping: trace dma_alloc/free direction dma-mapping: use macros to define events in a class dma-mapping: remove an outdated comment from dma-map-ops.h dma-debug: remove DMA_API_DEBUG_SG dma-debug: store a phys_addr_t in struct dma_debug_entry dma-debug: fix a possible deadlock on radix_lock |
||
Linus Torvalds
|
40f48f82a1 |
configfs updates for Linux 6.13
- remove unused code (Dr. David Alan Gilbert) - improve item creation performance (Seamus Connor) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8w7wLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNInBAAw8SDXF/rsJPic44XqRr4+nSgFif0Bhd0l8Xu1EZl ujE6EDGpbpk35CPK2cqhCk6tboFDayNeACWur52/NHxm+fO/gQq22LZU618HFtxJ QgS40naf6PczCY3SgEe4pOp/KlpGiO7y/FbgGYF2mVsTXpLzFq6ZC/RkAc3iir5E VUrnXRfsw0B7uZ/ndS+kBh6q0wTHkGqppi8rf4IpK051b/b5boFG+Kn0UpwK0iLX 47W7mwMgamAOWXHTHRxb/1dL7w5Q7YHvEqD39yHgs1iS+B9ooLZxSkdrkaigjWTM q6VQfemq9UQuDfbuAH8RKTbsopTxAUbPok/ioFe8SCiqbc/3CiU6ejQoIIWEh7Gy WUvD1ObMQKyP1T+rzblIzg1IU8XxddDjE/qpwZxhAKSmiihh6roRfjtTXmIGJdD4 TbwaqIOROSFCHFSbjLraXZ2YqE0OznIT01ZaV9SYEfi4AdbbVyy7bt8YOGX6zd36 Z73Z6G/t+ksL252KHQqtbUOTz2S3bVI3RePTqD6tl+J4sXLIR8CVC5zYn2z+gY8I 0fDBGt1Ur6XHOf/RGAuLo5PFo9xRntgKKPIMjTah4BFYAhIGhPGlxiX0l/XeokuX 3z/3zPJNX82o7QeI8bGo4qYz3oAs7PDsK4xmW2m6Ho8xXKVzLoohRQe8Aiex8o4o zQg= =nC4V -----END PGP SIGNATURE----- Merge tag 'configfs-6.13-2024-11-19' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - remove unused code (Dr. David Alan Gilbert) - improve item creation performance (Seamus Connor) * tag 'configfs-6.13-2024-11-19' of git://git.infradead.org/users/hch/configfs: configfs: improve item creation performance configfs: remove unused configfs_hash_and_remove |
||
Linus Torvalds
|
fc39fb5691 |
A few more patches to add sanity checks in jfs
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmc/WUoACgkQNqiEXrVA jGRbDQ/8DEhFbtbr0ugUJmStEfn+8oBXhsKhYZE1Y+U69SZT924Vn1gfbhxIBH0d W1aKcRVvmP0ASfplQemIyiB9sY4Nxd4CUlFD3RqycFR0fAyGIb7XccpkJBhms5/J itscgATuE8u5wms3CDByAiEj3kMu8Luf+jDTFVB2SNP0xPeqsqluXtTQwEFHKAmS 4IhbAH6hQ9E+mqufID8WjhLyKZLhCe8PQ4ccsenNZo8km4xDAv5m0CZD1Ks6k87b 3n6iG6Wk+5gjzGC/vGOJJIX3eZchMFhCwG+SkJ/7UKT475oKYDjgflpO2yVXWjXz mGTFdTLg+wNH+Jh9/nUNCN/2KsFAIx2wcaFmnLC7fmCJFKjVEIQV5Pm0eGi+vdt5 hU/onwn8rlPeKD8OIh4zKGMzDZj2uX825lfVXlYJP64UE/rOPkJgd7MH8TtNiFlu lpxkhM/xpCMfyShUHMWe38C2VwjqMNhW5Mz2EoT9OqSFsTBXTpeoPZOFG+iiJ1Gc AFWYM9UrofVj4/bSOOVfDMGSqx8dGfGc/QtEDwvKmTsaZ9imfxDRGmQyTwwuBKmi EyuKUjwvIQmF8Z/fqLov+0JpW0XsJLmpVJJ3t451sJgzwrffob0afYrMsW/e7a+f zHDz+WSJBKYsb8Wq9owmY29oHGtaoNQ3IguxnbFmD2pkNNnmg/g= =V1oj -----END PGP SIGNATURE----- Merge tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy Pull jfs updates from Dave Kleikamp: "A few more patches to add sanity checks in jfs" * tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree jfs: xattr: check invalid xattr size more strictly jfs: fix array-index-out-of-bounds in jfs_readdir jfs: fix shift-out-of-bounds in dbSplit jfs: array-index-out-of-bounds fix in dtReadFirst |
||
Linus Torvalds
|
6a550ae556 |
dlm for 6.13
- Fix recovery of locks that are being converted between PR/CW modes. - Fix cleanup of rsb list if recovery is interrupted during recover_members. - Fix null dereference in debug code if dlm api is called improperly. - Fix wrong args passed to trace function. - Move error checks out of add_to_waiters so the function can't fail. - Clean up some code for configfs. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEcGkeEvkvjdvlR90nOBtzx/yAaaoFAmc/VzgACgkQOBtzx/yA aapoARAA2PziTYUrYOPkvGAhFb78Sa64s2ECL0EGJTaVMzwniNp3lIL4T6Pr7d3Y nSM+Kg/HMEXT5lC9jJHMfGrOLoUicfWlBPEmoWDe+eNvGYBQVXSFoKnOEATMoHx3 OaH+UwbO1sXW13I0mflRTM/T4cTJr8BfaHsCf2yvp68VcZDXLo/HcbMX5AYxc1er 7xOeCcEUOnAGtb4hG4Dm/PaFKcsC1k1GL/ePq/OgiEKVYNeI4k6MWmbpULjiZd7y kd6SfFqb+V/YTXWMTuheQ04eBxvMovzXjhGpxQLWyofOsij8lTjndHVm8AkZCMRo oqa40dh1GzN6llvsIMJbuXfvp7aQR9EcYU4jc5FLx1rLH0KJzbmKursOlvcV7oRn qBWixB3fUN8as47od86vpZIwkW/GTn7UTrrtu602lyp0pjhdq0DErYFwJuoYStti Q0Txf7S0mxqQ5jNvMEk3Rx0sV6zuwu2yq/QU5yiUa9eVUrukUuIBpdbHLdpXMgRR SDAENw70PsHobW29i9ipZnttNJ3DrG61beYdizLxMxfuaRK+532i8GETIW83wn0o Aj/B5EZPB8z8pbw0PvDFKDK4VzuVHkCBMVfdOGS8RgRVtYiyfyC2QJ+u7FQfu2U7 LXvYqmFDH3VqqAYuYwMGpx1Iz9RgFipZCmauFyIdFmLL6ClWDp4= =5K+Y -----END PGP SIGNATURE----- Merge tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Fix recovery of locks that are being converted between PR/CW modes - Fix cleanup of rsb list if recovery is interrupted during recover_members - Fix null dereference in debug code if dlm api is called improperly - Fix wrong args passed to trace function - Move error checks out of add_to_waiters so the function can't fail - Clean up some code for configfs * tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix dlm_recover_members refcount on error dlm: fix recovery of middle conversions dlm: make add_to_waiters() that it can't fail dlm: dlm_config_info config fields to unsigned int dlm: use dlm_config as only cluster configuration dlm: handle port as __be16 network byte order dlm: disallow different configs nodeid storages dlm: fix possible lkb_resource null dereference dlm: fix swapped args sb_flags vs sb_status |
||
Linus Torvalds
|
2dde263d81 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WikACgkQnJ2qBz9k QNnZdwf9FfT95zhnNWk3ohNOh5BO0P/uTY2fNkQBDPLPY3Bi8nywPIjXYCDSOgX1 SBV0rakkWp+rVO1/qkg5J1mUvBoefzT7O17rG0LfRw3zjHPX+XeO+e3Xf/kPmJHJ 3fvN//VTZQ6uPcn8PWgLe8VVQqNXD3nlUrwz/JKaxyodsdm0ERej4QZjG6Cikotk aKuDPAnOiS37/lIFZGdJRca/rwJPwMekNt1SxVrnmin0/QfB/Uubba2+NNdQ+z3W SCA/26PK822T3ELB8BkfwpdINC17WUwDJlkC8qha/JRzDlxJC/ysr43fHn/7Adfb CthG8V4JDGm51jcC0qe0Yk2HV75U4A== =htHs -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "A couple of smaller random fsnotify fixes" * tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Fix ordering of iput() and watched_objects decrement fsnotify: fix sending inotify event with unexpected filename fanotify: allow reporting errors on failure to open fd fsnotify, lsm: Decouple fsnotify from lsm |
||
Linus Torvalds
|
c01f664e4c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY adWNOMGWdNNQXPFgGbL5yZwNZ64kRA== =Eq1B -----END PGP SIGNATURE----- Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
Linus Torvalds
|
597861d6cd |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WPcACgkQnJ2qBz9k QNkRXwgAlN2gbf1O2Df3NFl7CXt5jXhlvQ9UdA77F/j1YFL90kieVrHvQY1yManO +Z36nwWPTaigR7COuF9oFpCZsp6H1YY8yeqlATE+kZBFqSFQjFP8jpgZ/1JObs0M C2DeNibrhYm81FJhnetXyTnXifUv20Fa7xwHv5ULtZjPF0MY6ry4zqy+t4fE68Uq OhGyjwrTW2k1Dv36Nx6CAt3KOWvM5KPHVBpMu2frSRwNB7XBEfmfeCjqISjYccPl WzHsEQof7Re14GZOa9M6G/efLdXAiwFJF/w2BFCqcijLpjbBrHheEH8N9WBWoATd wJLt94PRTK2uJqc3jQ3tANR3gQO9Xg== =XneM -----END PGP SIGNATURE----- Merge tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and isofs updates from Jan Kara: "Fix a memory leak in isofs and a cleanup of includes in quota" * tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: dquot.c: get rid of include ../internal.h isofs: avoid memory leak in iocharset |
||
Linus Torvalds
|
2edc8f933d |
New xfs code for 6.13
* convert perag to use xarrays * create a new generic allocation group structure * Add metadata inode dir trees * Create in-core rt allocation groups * Shard the RT section into allocation groups * Persist quota options with the enw metadata dir tree * Enable quota for RT volumes * Enable metadata directory trees * Some bugfixes Signed-off-by: Carlos Maiolino <cem@kernel.org> -----BEGIN PGP SIGNATURE----- iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZzyNwAAKCRBGdaER5Qtf psV3AYCncK/pVhFfKQSFbnCvgPSoAe7N9n0Wt5gmjy0Ill2mbQXVl9ADXkH6a015 gcGM3t4BgIHLJQndL/Uz+3a0L5IriEb9QkAfzmx8t3vjiRBzBe3WfywEx9Yt7kZe xbxEJ2HQpA== =3ngC -----END PGP SIGNATURE----- Merge tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Carlos Maiolino: "The bulk of this pull request is a major rework that Darrick and Christoph have been doing on XFS's real-time volume, coupled with a few features to support this rework. It does also includes some bug fixes. - convert perag to use xarrays - create a new generic allocation group structure - add metadata inode dir trees - create in-core rt allocation groups - shard the RT section into allocation groups - persist quota options with the enw metadata dir tree - enable quota for RT volumes - enable metadata directory trees - some bugfixes" * tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (146 commits) xfs: port ondisk structure checks from xfs/122 to the kernel xfs: separate space btree structures in xfs_ondisk.h xfs: convert struct typedefs in xfs_ondisk.h xfs: enable metadata directory feature xfs: enable realtime quota again xfs: update sb field checks when metadir is turned on xfs: reserve quota for realtime files correctly xfs: create quota preallocation watermarks for realtime quota xfs: report realtime block quota limits on realtime directories xfs: persist quota flags with metadir xfs: advertise realtime quota support in the xqm stat files xfs: scrub quota file metapaths xfs: fix chown with rt quota xfs: use metadir for quota inodes xfs: refactor xfs_qm_destroy_quotainos xfs: use rtgroup busy extent list for FITRIM xfs: implement busy extent tracking for rtgroups xfs: port the perag discard code to handle generic groups xfs: move the min and max group block numbers to xfs_group xfs: adjust min_block usage in xfs_verify_agbno ... |
||
Linus Torvalds
|
90a19b744d |
Changes since last update:
- Add SEEK_{DATA,HOLE} support; - Free redundant pclusters if no cached compressed data is valid; - Add sysfs entry to drop internal caches; - Several bugfixes & cleanups. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmc8nosRHHhpYW5nQGtl cm5lbC5vcmcACgkQUXZn5Zlu5qoxDg/+JvYJjf0xXzCrSaIoSq7Xsfw0d1VLMHqP /ZSNCvixoUnkVouPNSR2HaBlX7xhiVSXaaAFuzAOM3Zf7UO/delVcwQNMeYYNTC2 Wk3ndMZR0C7jP6CpSRgU7of/KOO+W+8levFMJa/6TJCKb3IKgqrU894aiDNEFYMN LaZjP42rFmX0MLahAt5byqbKWMfr7YrGkcCxp8agQ3wFe+ssRXO0jU8MEflDk0zV 5Ar09HxzVSt5MRdvByPhcE66A4RBmdc71o77mN7uCFDxE8MdOxUjgyKBtcstYfUV A2ewHhTNt5zt9QaEA1NBK8mzhj2oAHjO8DsIZYgCyARLBvUk8RMeu6LGeu339Qjs n8nqpAg6v3rSCGVygBWNqovXaCzynhp3pt1Jh2463BAJXQc71pksPBXxbbzJgQVs O7pNJ1H+uQku/B0FfUCOAn1QgInWoGXMalZsmbh7ar9p0XLiVbXtNtUrrXtf0Ehd Px5OGmx3Cm3SwyGS8X18o4PKN3fAwc6Ff/C0EbJS+yl0lI0uN4IoVHywhabg9Njx TstfHBwz35emO6jI11XkfPgbrRLpwehWWTSu5yLTEpOC8jhsYXtUIEB7KgIz0llG IyFFWpnILUxEDkHvQoluHmTc9sACAAAG27anIIao5gIvhua43N0rGeara4BtD+Ni J3ZgND6yFA4= =CRuc -----END PGP SIGNATURE----- Merge tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs updates from Gao Xiang: "There is no outstanding feature for this cycle. The most useful changes are SEEK_{DATA,HOLE} support and some decompression micro-optimization. Other than those, there are some bugfixes and cleanups as usual: - Add SEEK_{DATA,HOLE} support - Free redundant pclusters if no cached compressed data is valid - Add sysfs entry to drop internal caches - Several bugfixes & cleanups" * tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: handle NONHEAD !delta[1] lclusters gracefully erofs: clarify direct I/O support erofs: fix blksize < PAGE_SIZE for file-backed mounts erofs: get rid of `buf->kmap_type` erofs: fix file-backed mounts over FUSE erofs: simplify definition of the log functions erofs: add sysfs node to drop internal caches erofs: free pclusters if no cached folio is attached erofs: sunset `struct erofs_workgroup` erofs: move erofs_workgroup operations into zdata.c erofs: get rid of erofs_{find,insert}_workgroup erofs: add SEEK_{DATA,HOLE} support |
||
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core ---- - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code -------------------------------------------- - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter --------- - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF --- - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols --------- - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API ---------- - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling ----------------- - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers ------- - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - adds support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Adds representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - adds support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implements page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - Add the dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - adds clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4 9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/ vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf THcvVM+bupEZ =GzPr -----END PGP SIGNATURE----- Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ... |
||
Linus Torvalds
|
6e95ef0258 |
bpf-next-bpf-next-6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmc7hIQACgkQ6rmadz2v bTrcRA/+MsUOzJPnjokonHwk8X4KQM21gOua/sUcGArLVGF/JoW5/b1W8UBQ0y5+ +okYaRNGpwF0/2S8M5FAYpM7VSPLl1U7Rihr55I63D9kbAo0pDQwpn4afQFuZhaC l7MzkhBHS7XXx5/70APOzy3kz1GDYvz39jiWuAAhRqVejFO+fa4pDz4W+Ht7jYTQ jJOLn4vJna9fSfVf/U/bbdz5lL0lncIiEnRIEbF7EszbF2CA7sa+/KFENGM7ChEo UlxK2Xz5fpzgT6htZRjMr6jmupfg7gzdT4moOysQQcjkllvv6/4MD0s/GLShtG9H SmpaptpYCEGXLuApGzkSddwiT6iUMTqQr7zs6LPp0gPh+4Z0sSPNoBtBp2v0aVDl w0zhVhMfoF66rMG+IZY684CsMGg5h8UsOS46KLjSU0fW2HpGM7+zZLpXOaGkU3OH UV0womPT/C2kS2fpOn9F91O8qMjOZ4EXd+zuRtIRv9CeuVIpCT9R13lEYn+wfr6d aUci8wybha1UOAvkRiXiqWOPS+0Z/arrSbCSDMQF6DevLpQl0noVbTVssWXcRdUE 9Ve6J0yS29WxNWFtuuw4xP5NcG1AnRXVGh215TuVBX7xK9X/hnDDhfalltsjXfnd m1f64FxU2SGp2D7X8BX/6Aeyo6mITE6I3SNMUrcvk1Zid36zhy8= =TXGS -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ... |
||
Linus Torvalds
|
43fb83c17b |
ARM: soc updates for 6.13
The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+D8IACgkQYKtH/8kJ UicuyhAAqR3ps9ukDj4jIVrQthV76rMb6HfEF4gQ4qxIjS3uLp5wfqjxzeTI7bKY ntrzU9rAxgMdTuRDVqONCxjgBvtg7pG9kXlbndVhl11RdryEeO/fat99V2mPN6yS 0t9tR6lxVcz3VRI5qcyCRYLRicDXyeNklsMwEhfSolS1hWbTG0b/qtn8oa+vQ7bs U33rnvudrC36Wpy4HU6XIissq1RgleUrGqC6L2M3OLSEOlS8tM4RBA215VaDiWs9 fP8dYhdMVWmlif9pXi1L1M3uqEE3ahVDwzqg1bSc0LmX7nn4rXGGgu/YGiALuW4t KmsoTdcwaPxiQR+WVp3G6EEVxumFpMfX1dGiJ8ZagaI+pbXpjHej6B+xhWCRgjfp eTK0YeGjDduEOaaozGys5NdqoGFKPpl+npLD1rQGBtizCJO1x6zINAyuRgNHhyYa 640Bn77O7Rs+41qao2Nnr4mfbur73d3q+K1qOy4Tx3BL5fQGyz4PwUkT/wG4C++j esCBO2lA9opw9ZJzBSFWx6ez0GtEW+kVUf3dNDSXxYawVNBrIoV61xnG7Xcfqz0x RFSWTATWKLI34Px6fuorVxVw8xcGdQGgvbvIDbj2aiC8yXIbzeeSs8P9pEsakYD9 eej8H6eRy/EnOwBC8yJXCHoAA31PqaO+aLI5Vf0p0m0Ibtv/1zQ= =lQ3B -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups" * tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: Switch to new sys-off handler API ARM: bcm: brcmstb: Drop custom init_irq callback ARM: bcm: Support BCMBCA debug UART ARM: zynq: Remove unused zynq_slcr_init() declaration ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata |
||
Linus Torvalds
|
06e47dce8f |
soc: defconfig updates for 6.13
As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+EHIACgkQYKtH/8kJ Uid+ahAAnkQNh7m0+0l8O1DxLVjCVDb76f4r+dvYWBzBzOZoSvkLQzhKILGmgjFd tfLpWr7sfpgT7YPZxrwHK/muwpZ7rflTiC5P0qpgeo4VzO6VXv5r124uzYg0nEPo /t4hzCkAADKu80hNeDfaKFk9GbqvkOBKnO0PHpuTPGubiy3gU2cH6EvyqUYokvBM c0iD8fPtI5zb6oBju1oRFJtXIX6TJXXbQvjOIVmhz7cEsl/RAmPJLbbpgT/u8roR pCIHX1pqw1bURaUrBQiv33E266tF6kg9KYJUsGvXkykd0ifyXSOneYsxoadvO5x/ +2Xrfj243aMMz9EDXd2oczdpuoPyGkyUeaaNy61EvgMzaYpf3B9B7g7mqfuyhaCs VvXbWIc3jpA3P8dbyBOZhQQF8NzHMP8Dj8ymQhN17FiwkQTDV6CtHHO8srkKSoYU IGgtNJce0IvLEz87VU9C1F6DA5dscdTRGrlDErv+2ap5IeyCtE4gJaFNO+/64wUk QUP+gphCqxMXQuLmOIrKV9dsslnChRM9qlgNaJQMbvKvT25xRIpNc9/mmVPWoAs+ 1A3wdHn/ZOvaFBcWwNHpZaNu/3ybHGp60wkejWCiEzhaLabXBsEoKOap7+1cWGTK IlVUiaJoNIYBoLACTqx42AATgn0TsNXj4NVHq3poiodi1/7wunw= =tElw -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig" * tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3 arm64: defconfig: Enable PCF857X GPIO expander arm64: defconfig: Enable sc7280 clock controllers ARM: configs: at91: enable PAC1934 driver as module ARM: multi_v7_defconfig: Enable debugging symbols by default |
||
Linus Torvalds
|
14d0e1a09f |
soc: driver updates for 6.12
Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus, and drivers/memory, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+DsUACgkQYKtH/8kJ UifNWRAA49Ife6ybk8jamM9Bd07kFmHdaad0ttgUtx7HMJBg51+JLNFwTVYM2p6b A1SWCsS+sxP1RBKuhgZrt+sDPAoDlYLQaF1WQB7cs4FXqYpc2Po8BmBili5BV635 Zv/9C9ofsWiWg9pGy0rRFvHW0W48lBoQM61YZzQc85pyEod5RSgji/jUEzvBvhln V3hegw0myBecJ8b7jH9Fjre3gMSC65amlXemkDS/7FGXXA7V3BKmALglJj6BR4RD QtQgFOAe/XGmbOguMvZJvVbMnW8PbmS5k50ppixBPAultHflkdg4DdnIW59yUfK+ Mr98sW8U/LirACX93uwSzBNY1m5cW+GP4DoemxIUIQAvXxR4HroLoJdHS+BfWH+H Pn9dgSZu/dUlxfzTYzvd0B5TUjDGkYubVtQ00PLOWFHNfhZSmCqGl5J5NjgINRCf mBwhvUBYXgvNrOaEnll2kt2ONbxT7WAJAcKdnXKDjG4nPDyXBLRYoE4gro4Iii7+ 1OA7NlInwW+XFfpIIJeYa+AOTgb0/MKdONG+CkUnn6Bc9+B7Xdg0w0VDlmsVbXae fRyaI6XKmyNtmFZM4+gUxIhzvOgYpOoMITQJHcHSYuzWQpsnkkRas9aTCyBSLAd4 D59cQwqtmE9rCfp3A7heMeKCIRtfJzoWnW0bjJAPSccLyJP99rI= =xeCE -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/{soc, bus, memory}, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers" * tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits) soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped() platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names platform: cznic: turris-omnia-mcu: Document the driver private data structure firmware: turris-mox-rwtm: Document the driver private data structure bus: Switch back to struct platform_driver::remove() soc: qcom: ice: Remove the device_link field in qcom_ice drm/msm/adreno: Setup SMMU aparture for per-process page table firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID firmware: arm_scpi: Check the DVFS OPP count returned by the firmware soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404 soc: qcom: llcc: Flip the manual slice configuration condition dt-bindings: firmware: qcom,scm: Document sm8750 SCM firmware: qcom: uefisecapp: Allow X1E Devkit devices misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent' misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property' soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC ... |
||
Linus Torvalds
|
9c39d5ab45 |
soc: devicetree updates for 6.13
This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform wtih DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newlyad added features in existing boards as well as cleanups and minor bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc92V4ACgkQYKtH/8kJ Uie7+xAA5BIu2fSl+cCCOLdWvNulgYJBZfgOC+1vay3A3zykTR5Hd/X4/GOetqb6 uhCJ7MER0md2PBCdffN0JDuDnvBGdOEbHghsY3iqqwP4ad+bk4+Ib/dxgM0uid3t W2NykLvmXmjFJiwjvMKE4aSPi+lCskLehPC05IIJvM/DplGflIoq7Rf+q5WIvStT K5kpluJBD81oQkfBn7FwVJWeM6OZ1CZg413m0PNMoojd6SzyPVNGnd004qEHfwkv Ra1w9cHM2+zagPrkTrFp0bpxfUYwoXiP8uPq9crXrhgeq4JmQBHuTR0ek+mMC2nI aRgi91za8YPgC8APXks64BBqXCxHVse9n228MpldMAabURez5wMkufNFfQc6yLks AhQxD2joVFS+i/pE8WyFlS3/aopNUzIbqVyIhpYiYBLz8xQBSv7KjqySRufrBEhP lMA548uDQK5p1TRnl8L6cDXdHTN9MbqtREIozBeO20iolHJtqLBcw4erZFhwnJsP 2QQVN9P8AXOE/U/RZcV8Wfm7kUoU4FI29G3XlmUnpBmCHQd3Ql2Xv56gaDaAtb3s hF83uTA8bKjby9Xu0c9JQREeNsLEmI/WwuUWlSEcn1cGBZ5ahg8FMta55H8tpX8O OizWoPviwUar7HFASA/ZvN0KoPgq/a8HWRXT+Q+/xBBqnHshtLk= =Ha1w -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC devicetree updates from Arnd Bergmann: "This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform with DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newly added features in existing boards as well as cleanups and minor bugfixes" * tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits) arm64: dts: apm: Remove unused and undocumented "bus_num" property arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property arm64: dts: lg131x: Update spi clock properties arm64: dts: seattle: Update spi clock properties arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25 arm64: dts: rockchip: add Radxa ROCK 5C dt-bindings: arm: rockchip: add Radxa ROCK 5C arm64: dts: rockchip: orangepi-5-plus: Enable GPU arm64: dts: rockchip: enable USB3 on NanoPC-T6 arm64: dts: rockchip: adapt regulator nodenames to preferred form arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2 arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5 arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer ... |
||
Linus Torvalds
|
79caa6c88a |
asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+Z0gACgkQYKtH/8kJ UicqzA/8CcqVdcWKlFAyiFI62DCkd3iYm/joNK3/JhvUIvVFvY+HI0+XpTeOEN1r dfYBNg/KTVSbia5MEEy28Lk5WdoA3X7p9E8NuYC1ik/qvH3Y0kXDU2NiRcJDwalq u56tGUwDITFUzRo47a4Z53JpV60FlGaUVjuKp1jJiOQkcs/iussVYuti8mNVb1ud 1tf21TEAIywq43IC8CxevIRsBkJBqMhalaGWYgKw3ZTwXdiKaXed6RH7IjPodanN 6b7R6aFEqlT7usFX9vLOYNRGzd3HIueXOT1iqiiGI1lm5u/iutxKH+8eS4q381oN WJL0jQdo4sv2MxtSHYrjpzPRQpSp/qrin29h3PVjwBjZF3i5WvFeTYgfjQEEkqe0 fpTXjUsr5n1F1pGV90DtJHwaD5TxKD4VYFLDRCDGUiAnWPkZ7EYUBL3SA6GqEkXB 1lVRPsEBo0y867/WQcoCZA/x7ANZDI6bDZ6fjumwx8OCZOHZeN6FGtqQJHcVZR5O +nu/j3I8YH1tZGKbA+wliyQwt/T60Oxs62HHcFzFLGakARwUEDYO53IGCJUByFwk kCrgNVvzFklwWpqqyTADqb5lkQKpZr5gIdpst185qttCQkb+EFWiCi9w2inXTjHl 2oCc7Uf0cvoxnhVlJAw73eGTtpqS37KCWK+iNyrQbOfy+hgIv+w= =zEHk -----END PGP SIGNATURE----- Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ... |
||
Linus Torvalds
|
c66fbc6c3d |
OpenRISC updates for 6.13
A single fixup from me: - Fix bug with earlycon being broken due to removal of early_ioremap. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmc8xS4ACgkQw7McLV5m J+T9IA/5ASXLsoterJXCo9ds34n9oIoEiur8UcOY0LELCm5M9HP0z62at0IZccX9 Tc+DFl6rCJBwZWn7JmYo8qnkO+hTkAoRDFx+I1WMlzjczOLHdwZ3E26u4/cWrhVd j4eISjk5KIFO2DExIdEXgKWetagcfjgyo44/SU+7PLApNPnAeE6bBu5VYypfy+sd BWPZs+FoFBjszdRHjo1mowxbS1Wa6znhWbELyFAY/5hFWIt+91YHS1rpxDoDPnE+ GUYMIFTJLdXlc0eyGfsjcvcHX08NankY8Betg/6e2jENqO+fQHb7KuYL+cxoTDAv HlIfzJQ6YRnfxB8XSLJvAT/bmqoYQAuVydvoFN/45ogzu1OwizM6e6mGw5ErgYkO kRPXa5IgCbORc3v8Dxd+IZNJ4FzBXQ7BDz0V92FYjtJ3OsQKsVHX/t2dGhd4wmGS ItzmxRp55ufqYkb2Waszvq+dBvuW6gJHHB9k9h0mZKhVEm1V2TisIIpdnE3FF/QA p81cPdvHxsp4mf5w30kIaFMHgKM+6jRUEl6IDTEmOtim02Zu75y1JQE8mFZ1yFZ0 l4KPnhU2hYzXG/eqinzRuyRap2wgIGPAXC+mL4LekL74TqmaEGrTeBOq1z+DnMwz u7dQwLJsbomjJUc17MJcKH3zZ1l7xFZxIEbaFrGaimlRMHHQS7Q= =3/S+ -----END PGP SIGNATURE----- Merge tag 'for-linus' of https://github.com/openrisc/linux Pull OpenRISC update from Stafford Horne: "A single fixup from me: Fix bug with earlycon being broken due to removal of early_ioremap" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Implement fixmap to fix earlycon |
||
Linus Torvalds
|
f103749785 |
Microblaze patches for 6.13-rc1
- Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZzw3uQAKCRDKSWXLKUoM IapyAJ0TsUChBtA7+FFPYXwfQ2nrbhGytQCeNegQkFHSL/Ray6Tsk4Q1zejixlU= =2mED -----END PGP SIGNATURE----- Merge tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: - Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() * tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: mb: Use str_yes_no() helper in show_cpuinfo() microblaze: Remove empty #ifndef __ASSEMBLY__ statement microblaze: Export xmb_manager functions |
||
Linus Torvalds
|
7e7f65647e |
ipe/stable-6.13 PR 20241119
-----BEGIN PGP SIGNATURE----- iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCZz0KKhEcd3VmYW5Aa2Vy bmVsLm9yZwAKCRDyomI6a/yO7RD5AQDY0KVqHmtmLRaIAXTUX/YSZYfw6pFVIFzv b3YkugWwAAEA/iBdSQCFBK9GnFAhVmKL99T5opHu075vfj2CGdA2Yg0= =EFOk -----END PGP SIGNATURE----- Merge tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe Pull IPE update from Fan Wu: "One commit from Colin Ian King, which removes unnecessary error handling code in the IPE boot policy generation helper program" * tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe: scripts: ipe: polgen: remove redundant close and error exit path |
||
Linus Torvalds
|
df66aeadd8 |
seccomp update for v6.13-rc1
- Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZzzEewAKCRA2KwveOeQk uwp6AP98Sv73J57WD09zKPFS7xHqTyWgfemD9M8RPSMIgkudBgD9F3tNRqQ2DD6o IX6Zv18AObJSKAZ95No65GHVRHtomAY= =T7J1 -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp update from Kees Cook: - Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) This will make it easier to port arm32 to the generic entry code. * tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER |
||
Linus Torvalds
|
18a411cc5d |
EFI updates for v6.13
- Align handling of the compiled-in command line with the core kernel - Measure the initrd into the TPM also when it was loaded via the EFI file I/O protocols - Clean up TPM event log handling - Sanity check the EFI memory attributes table, and apply it after kexec too - Assorted other fixes -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZzxU/QAKCRAwbglWLn0t XIBoAQDAHoTX2/CxsCKHXaJE8C19kN451lgLRtZea5kFCVhq+QD/YDVxfif4OvUM q2Wo5BwmqyUk56qHAW14DWZb2Pl1sgU= =YFm/ -----END PGP SIGNATURE----- Merge tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Just some cleanups and bug fixes this time around: - Align handling of the compiled-in command line with the core kernel - Measure the initrd into the TPM also when it was loaded via the EFI file I/O protocols - Clean up TPM event log handling - Sanity check the EFI memory attributes table, and apply it after kexec too - Assorted other fixes" * tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Fix memory leak in efivar_ssdt_load efi/libstub: Take command line overrides into account for loaded files efi/libstub: Fix command line fallback handling when loading files efi/libstub: Parse builtin command line after bootloader provided one x86/efi: Apply EFI Memory Attributes after kexec x86/efi: Drop support for the EFI_PROPERTIES_TABLE efi/memattr: Ignore table if the size is clearly bogus efi/zboot: Fix outdated comment about using LoadImage/StartImage efi/libstub: Free correct pointer on failure libstub,tpm: do not ignore failure case when reading final event log tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size tpm: do not ignore memblock_reserve return value tpm: fix signed/unsigned bug when checking event logs efi/libstub: measure initrd to PCR9 independent of source efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline() efi/libstub: fix efi_parse_options() ignoring the default command line |
||
Linus Torvalds
|
fcb3ad4366 |
platform-drivers-x86 for v6.13-1
Highlights: - alienware-wmi: WMAX thermal interface support - amd/hsmp: Split ACPI and platform device based drivers - amd/x3d_vcache: X3D frequency/cache mode switching support - asus-wmi: Thermal policy fixes - intel/pmt: Disable C1 auto-demotion in suspend to allow entering the deepest C-states - intel-hid: Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - intel_scu_ipc: Replace "workaround" with 32-bit IO - panasonic-laptop: Correct *_show() function error handling - p2sb: Gemini Lake P2SB devfn correction - think-lmi: Admin/System certificate authentication support - wmi: Disable WMI devices for shutdown, refactoring continues - x86-android-tablets: Vexia EDU ATLA 10 tablet support - platform/surface: Surface Pro 9 5G (Arm/QCOM) support - Miscellaneous cleanups / refactoring / improvements Expected conflicts: - hsmp driver split into two vs constifying bin_attribute [1] [1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/ The following is an automated shortlog grouped by driver: alienware-wmi: - added force module parameters - added platform profile support - Adds support to Alienware x17 R2 - alienware_wmax_command() is now input size agnostic - create_thermal_profile() no longer brute-forces IDs - extends the list of supported models - fixed indentation and clean up - Fix spelling mistake "requieres" -> "requires" - order alienware_quirks[] alphabetically - WMAX interface documentation amd: amd_3d_vcache: - Add AMD 3D V-Cache optimizer driver - Add sysfs ABI documentation amd/hsmp: - Add new error code and error logs - Change generic plat_dev name to hsmp_pdev - Change the error type - Convert amd_hsmp_rdwr() to a function pointer - Create hsmp/ directory - Create separate ACPI, plat and common drivers - Create wrapper function init_acpi() - Make hsmp_pdev static instead of global - mark hsmp_msg_desc_table[] as maybe_unused - Move ACPI code to acpi.c - Move platform device specific code to plat.c - Move structure and macros to header file - Use dev_groups in the driver structure - Use name space while exporting module symbols amd/pmf: - Switch to platform_get_resource() and devm_ioremap_resource() - Use dev_err_probe() to simplify error handling asus-laptop: - prefer strscpy() over strcpy() asus-wmi: - Fix inconsistent use of thermal policies - Use platform_profile_cycle() classmate-laptop: - Replace snprintf in show functions with sysfs_emit compal-laptop: - use sysfs_emit() instead of sprintf() dell-dcdbase: - Replace snprintf in show functions with sysfs_emit Documentation: alienware-wmi: - Describe THERMAL_INFORMATION operation 0x02 eeepc-laptop: - use sysfs_emit() instead of sprintf() hp: hp-bioscfg: - remove redundant if statement intel: - Add 'intel' prefix to the modules automatically intel-hid: - fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 intel/pmc: - Disable C1 auto-demotion during suspend - Refactor platform resume functions to use cnl_resume() intel/pmt: - allow user offset for PMT callbacks - Correct the typo 'ACCCESS_LOCAL' intel_scu_ipc: - Convert to check for errors first - Don't use "proxy" headers - Replace workaround by 32-bit IO - Save a copy of the entire struct intel_scu_ipc_data - Simplify code with cleanup helpers - Unify the flow in pwr_reg_rdwr() intel/vsec: - Remove a useless mutex MAINTAINERS: - adjust file entry in INTEL TPMI DRIVER - Change AMD PMF driver status to "Supported" - Update ISHTP ECLITE maintainer entry p2sb: - Cache correct PCI bar for P2SB on Gemini Lake panasonic-laptop: - Return errno correctly in show callback surface: aggregator_registry: - Add Surface Pro 9 5G Switch back to struct platform_driver:: - remove() think-lmi: - Add certificate as mechanism - Allow empty admin password - improve check if BIOS account security enabled - Multi-certificate support wmi: - Implement proper shutdown handling - Introduce to_wmi_driver() - Remove wmi_block_list - Replace dev_to_wdev() with to_wmi_device() x86: acer-wmi: - remove unused macros x86-android-tablets: - Add get_i2c_adap_by_handle() helper - Add support for getting i2c_adapter by PCI parent devname() - Add support for Vexia EDU ATLA 10 tablet -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB 4BkujKwqo3cdGNPjIBy41jnNjekNsw8= =QEd2 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - alienware WMAX thermal interface support - Split ACPI and platform device based amd/hsmp drivers - AMD X3D frequency/cache mode switching support - asus thermal policy fixes - Disable C1 auto-demotion in suspend to allow entering the deepest C-states - Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - Replace intel_scu_ipc "workaround" with 32-bit IO - Correct *_show() function error handling in panasonic-laptop - Gemini Lake P2SB devfn correction - think-lmi Admin/System certificate authentication support - Disable WMI devices for shutdown, refactoring continues - Vexia EDU ATLA 10 tablet support - Surface Pro 9 5G (Arm/QCOM) support - Misc cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits) platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake platform/x86: panasonic-laptop: Return errno correctly in show callback Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02 alienware-wmi: create_thermal_profile() no longer brute-forces IDs alienware-wmi: Adds support to Alienware x17 R2 alienware-wmi: extends the list of supported models alienware-wmi: order alienware_quirks[] alphabetically platform/x86/intel/pmt: allow user offset for PMT callbacks platform/x86/amd/hsmp: Change the error type platform/x86/amd/hsmp: Add new error code and error logs platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused platform/x86: asus-wmi: Use platform_profile_cycle() platform/x86: asus-wmi: Fix inconsistent use of thermal policies platform/x86: hp: hp-bioscfg: remove redundant if statement MAINTAINERS: Update ISHTP ECLITE maintainer entry platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname() ... |
||
Linus Torvalds
|
70e8ef2d67 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8TpAACgkQCF8+vY7k 4RUQug//fmDVv94YOgjjfpHYfJU6imzlcTNcHpQnVFbDNSshEOh5bMwEcvhP69pc 1NxpDuzxAVUgANR09VRG58jevpIm0AROMeG4BV7Ah5BGO8a9YzD/ngZ0QxMZJ3gr 4q3de6JhEGFvNzidLQMaqaQEcmIl7dFd3A7f/+VpPLBZfbhL67cseItRZ0Bwmxh5 yu7ENYFqESuvo7maNPrzRaFz0Z34z0pTvNViEK4ZHnkVYDtTurD4EoAWxUaoQIVH E802RKWdg4sPiTUeeWw0ONeSZR6pw/QOqalqalKKxVrxWPtrhXUxnrdjwn97VM5u H7X5Y4Dkgp86jCjs7aTHfrsAFrlT71XRmbjROwRmwccLXYQeJj0DsHZwYFe4dXx4 MbNo80hhr8/ADRKkioAwe+omNay998cVWvlinMRHqUfdLQcggW4txb0VGNTE56nL BMZ0A05LWuyWqbbejhGmPlj676w5NdK2MCNUtb6ei3TIE1LDeN05t6cfm+1zkfQU 1I6AdkBfPe7vfQtQtFUD/iQIkG3bl07PwGsCfOnzAkLz95Ap7lMyHG51UwllPkUX WGXHQNBVhzoftw5SNPUNAp1GTjPhNFqA1ZaSmBWz8EZazrq/uFMZk3wCAuO1yqI2 Matp/j+KKegEUlkb4bsVoAM/nm8yaWlmxVy5VsmFovKAnbJhy28= =BFNW -----END PGP SIGNATURE----- Merge tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: - uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format * tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format |
||
Linus Torvalds
|
9f5a6a1fe6 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ... |
||
Linus Torvalds
|
b57807cbbf |
hid-for-linus-2024111801
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZzusZKZi849r7WBJAQKH9Q/+Llff1j+bP/W2E987vDy8zfFrMHR1nTrB nJb1mXKCp1AG+HcrrJh+9nVZXaXJtoduJ83wufxZoeK2jT06ij+TXPRW3JJcYooO C1UK8CI6fQBzTzKtDLRdBxv8MVTyuFI8KkBasDQQEJafRSN4rW007zA5B+EftcXe N9eb1+BiSbIMDtFdLw6N7kvDwfUj9iWO34cmH7ahv1Y0mj94OCRylN3p3fsbvkjG N5VP0Dm47X5H3OhS85HuVVskpFeMWBnNnLBFCxSoSELhl9pbXcriNQtUrk+uyHfL ObGrUajJlw6rrlCwugonJ5a6HmpWcfZBaXlvkP1b/q4oAePQ+Zuv0RStvPeqiM07 3m4XJf8kcRhMnUVYKo4nv9kVedK+EKu/HBZQsgTdDlTKV3BXpktt7PRD/WUKZ7yG kr/JWOlJho2Lzg7ky/47aJOgRfaLJzhPx1vSoSHrglB4L+4b+J0wZassc/iTkA0Q 9JS1Jci41oAcMzDW4KMkE2GIyXeTeSUTJH54DAm4+SXwkR1Sgn0K+ogceRc86ooA ZQu8touqvHBrVekC6jaFAA92IekLO5UFmiUcbQ1MHFdjx5Y9nruwKd2DulLV9cb9 XdHZMzT2RSdL1DLh5LlXRhLOSplhg0sUj9/XkCHIMX2GXa+ZNgFEA9VxDYBnB+dJ XZsGAHtgWQg= =J6g1 -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - improvement in the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires) - removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang) - assorted cleanups and small code fixes to HID core (Dmitry Torokhov, Yan Zhen, Nathan Chancellor, Andy Shevchenko) - support for Corsair Void headset family (Stuart Hayhurst) - Support for Goodix GT7986U SPI (Charles Wang) - initial vendor-specific driver for Kysona, currently adding support for Kysona M600 (Lode Willems) - other assorted code cleanups and small bugfixes all over the place * tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits) HID: multitouch: make mt_set_mode() less cryptic HID: hid-goodix-spi: Add OF supports dt-bindings: input: Goodix GT7986U SPI HID Touchscreen HID: hyperv: streamline driver probe to avoid devres issues HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support HID: rmi: Add select RMI4_F3A in Kconfig HID: wacom: Interpret tilt data from Intuos Pro BT as signed values HID: steelseries: Add capacity_level mapping HID: steelseries: Fix battery requests stopping after some time HID: hid-goodix: Fix HID get/set feature operation overwritten problem HID: hid-goodix: Return 0 when receiving an empty HID feature package HID: bpf: drop use of Logical|Physical|UsageRange HID: bpf: Fix Rapoo M50 Plus Silent side buttons HID: bpf: Fix NKRO on Mistel MD770 HID: replace BUG_ON() with WARN_ON() HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set HID: Kysona: add basic online status HID: Kysona: check battery status every 5s using a workqueue HID: Kysona: Add basic battery reporting for Kysona M600 HID: Add IDs for Kysona ... |
||
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmc7qaoACgkQ+vtdtY28 YcN54g/+Ifz4hQTSWV+VBhihovMMPiQUdxZ+MfJfPnPcZ7NJzaTf+zqhZyS4wQou v0pdtyR0B1fCM/EvKaYD+1aTTAQFEIT5Dqac+9ePwqaYqSk+yCTxyzW9m+P3rTPV THo8SGRss7T+Rs+2WaUGxphTJItMGIRdbBvoqK+82EdKFXXKw2BSD8tlJTWwbTam 9xkrpUzw7f4FvVY8vVhRyOd5i8/v+FH8D65DMIT6ME9zRn4MzKVzCg6udgYeCBld C2XbV+wnyewtjrN2IX+2uQ2mheb7yJu3AEI3iFR5x/sRrsSLpisxrUl38xOOpxrM XxYtHgE3omjagQ+y+L2PMthlKvhFrXVXIvhUH8xxje5z1Vyq3VMfiABkHlMpAnys 5LY4xEhvqDkPNo65UmjMiHxGW/xtcKsmAZBOp+HLerZfCJIFvl380fi8mNg/Sjvz 7ExCSpzCPsHASZg7QCTplU3BUtg+067Ch/k8Hsn/Og73Pqm3xH4IezQZKwweN9ZT LC6OQBI7C3Yt1hom9qgUcA4H4/aaPxTVV7i0DGuAKh8Lon6SaoX2yFpweUBgbsL/ c9DIW4vbYBIGASxxUbHlNMKvPCKACKmpFXhsnH5Waj+VWSOwsJ8bjGpH8PfMKdFW dyJB/r94GqCGpCW7+FC1qGmXiQJGkCo89pKBVjSf4Kj45ht/76o= =NCYS -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ... |
||
Linus Torvalds
|
80db457e8d |
auxdisplay for v6.13-1
* Move Holtek 16k33 driver to use agnostic i2c_get_match_data() * Miscellaneuous cleanups The following is an automated git shortlog grouped by driver: cfag12864b: - Remove unused functions ht16k33: - Make use of i2c_get_match_data() - Drop explicit initialization of struct i2c_device_id::driver_data to 0 lcd2s: - Drop explicit initialization of struct i2c_device_id::driver_data to 0 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAmcrVb0ACgkQmT3/83c5 Sy2FQw/8D/237N73INQrDYBT6CF6vR6qoI7yms3OsOQV6f0WydHbG5dUqE+tXZ2g Axh1S4CKtJaO8PQjS+Tb1GFzzM/N9uIyFG8zQN520wU6CzW7ipvmqs3l2yREQzVz 4/ZrwVhUkDl0//x/Cd0PNGKhiIomszQVjc4TlHzJZXQtdx3Mkh/Xg8yo5QzYQRd5 JjcOW0s8GJd39+dT417oq/4LZE0mYvsEJQeU7RWf7EvkUy6GmWUiIoNOKBVkb6Sz U/PGdyux9sO9+6hH4ziJiaQRi+O9ZbLlNlL8VV++T35G+p1Y6lZGXTRduVQ1ElLz 98m1nrHNCKb6uvmtjDiA1Xlojf06cmpg+v2J+eD4aultIrHRiGgS4ZdRMJj5MoC7 +jyZBYPwNwDmOQAIPWqphVquXRkznvEqfKmfxtohDfsx0QBhdrEIJVtdIpUT1fqk 9a3vok/7TMJM65UE2Qo8omJoztjCf1YAPA5cHFpcr/i8Hl6GsHJP3ojTA8ryVDcQ MkxPI8AkEfOWqqa/amUN+mYh6sS8+rSKcVcKm/r1uV/ncH7CUAaxeWDSc8KT5IMX x/3n4+l8l+ZohAr17OVm+9rBl0KFtH1U3gXC+lkDuuvNmd7NbwBrUJWnop+zVwNb EEUqXU7y8Mljje3GCiUOn3M6FDzpVa4uVp9F7Ty/4Gnerjxj4Ns= =Z6SY -----END PGP SIGNATURE----- Merge tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay update from Andy Shevchenko: - Move Holtek 16k33 driver to use agnostic i2c_get_match_data() - Miscellaneuous cleanups * tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: Remove unused functions auxdisplay: ht16k33: Make use of i2c_get_match_data() auxdisplay: Drop explicit initialization of struct i2c_device_id::driver_data to 0 |
||
Linus Torvalds
|
38556294b8 |
MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/ msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw 7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R 5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q 8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ 7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt oZlprarw04AoECCg5Ko= =LGdl -----END PGP SIGNATURE----- Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ... |
||
Linus Torvalds
|
75f2b37dd0 |
pmdomain core:
- Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7Y+QXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmbrw/9FVdo3+mo6EZne+Zsxc0+3N9G bRwkgyCB8WSFy6MHD1TRyP9u8bFgFDitSxcUGuBW0l9t1le3IcsYwfbTEEZpUkU4 iasPoZoFKA3Akfr7tvQpIpSNh8MIBMFy7CfxWpsfiHlmwrIH6oT6HmlwWwFsbVxh Fv8xA5SOE1KRHq0Aos23h7MizPsav/PYSh/4Ga5l6ZBlm40c16cE0i0M4RRUnoNY FmUBe57HoumDd05ToFR9wrqMEVWbAJHV4xZpZwnfYUhwGrgbxUWI/1FIfwxtob12 OExPr9kiV8/f8Kfp3E3ul0R8q8XYaYZaT3R7nF5QOngLZCCpD5H9aWEcAihUryBh Ol9Wao0Ku1JqLc776bjwf92ozFDtx0yUN/8LXmQgUu+e+MC3eAOrsls+U4731p+Y V80mvBpqn8AbX7LOjJvmbOhK6Qnm0cHo2cs0afBSS5c9RBcCWuEy9d7n8dks6JX2 7H6ySDaKoEEK06V6VzEKdHQoRFkmw95w4n7Ei3OL0cxNLcT1ILGA1+O7PPw+6h4T 3UnSik6szZCBXFFaDsw4J53HZACVZWbkyrk5Dbsigte8lh6e2VI+qd9whd46nuCY Sn4vJ399FJvXBuEIu+8yymGwn/NSpgd6ybpkwdDNJ+fItbes7DQhtxM6k74ANAhf 0irf1o4Yv0S5W+pXBAM= =SpyF -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd()" * tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits) pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750 dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains pmdomain: imx: Use of_property_present() for non-boolean properties pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe() pmdomain: ti-sci: Use scope based of_node_put() to simplify code. pmdomain: ti-sci: Add missing of_node_put() for args.np pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains pmdomain: mediatek: Add support for MT6735 pmdomain: qcom: rpmhpd: add support for SAR2130P dt-bindings: power: Add binding for MediaTek MT6735 power controller dt-bindings: power: rpmpd: Add SAR2130P compatible OPP: Drop redundant *_opp_attach|detach_genpd() cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list() media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain drm/tegra: gr3d: Convert into devm_pm_domain_attach_list() OPP: Drop redundant code in _link_required_opps() pmdomain: core: Set the required dev for a required OPP during genpd attach pmdomain: core: Manage the default required OPP from a separate function PM: domains: Support required OPPs in dev_pm_domain_attach_list() OPP: Rework _set_required_devs() to manage a single device per call ... |
||
Linus Torvalds
|
0cea110255 |
power sequencing updates for v6.13-rc1
- extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7Ou4ACgkQEacuoBRx 13JohhAA1qSsMSAiMzjx1v46QHxsKvQQatRGjUuqsAIKPNJ73IeZ9h7KmlXJ4Uti GS78mL+kS0Xo3YiHDAMBErk+K3FARbjljcLAKeMb86Ait3gc56nw9/X+osdAvM3x q5gKpT8Gm1zKTaN85beZanmw5/uKc7cBI1+hx2PdPH8tR2e9g8KP2Z5dMG31sGx3 GsyEal/WXT2NppWipXQOgRAQgMPW5yCtXkR4uIprRtrWl4h7rS4mNmC7genb1kKV xDzztqR4MjwKNL+TnfMxPlPJsJSecWMETpVjZEhguACeiRo9oJiBpLqbdOAKEj4+ LjotJSohFEb97W2F/k3ZlyE9gWKyeTq6yhcsUOFVXvLFLYQjSK0z/59yy34zCy3d GD73cuG3O0g8xcU415Nx8Nv7srIIoIWDRKpbhM4HfO8wQXCw4RgHD9jarj9kWU6/ 6phUjgQ+YopVACw/kTG7I0tzFQEXN0IeOVyRAaac4LIrgNktyRbWJi0D/ZdNcg0p fVXPEq0ipsYvMuV+Qj1nrRZKJHQl4DZ4+QjY2aNIB/rvFkX8o4rXah6m9jWYlHtm Y53U8TL0IwYP+Nt+cW4+tX75FnvHuw4dDpqWnUEY/rN9+Cgj7NFvBWFZwdXYytoa AF552LczvcQFyNfPl0jWo/4/Khqhy1hWOb0OWci0Aq8VDEPe6Ps= =IOPC -----END PGP SIGNATURE----- Merge tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing updates from Bartosz Golaszewski: - extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing * tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: improve support for wcn6855 power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF |
||
Linus Torvalds
|
131561f2ca |
gpio updates for v6.13-rc1
GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - add a driver for the GPIO functionality of the MFD Congatec Board Controller - add a driver for the PolarFire GPIO controller - add a driver supporting the GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7INQACgkQEacuoBRx 13Kotg/8DDkhZ01Qc2uR817DjCdbalS0TDr4FYn/XusyeBEgNgQDm/TcfmIMiU4M Dazb7pOXfEc4VJqPTSpvqsTwTyMLN1pi58ZXZZA760rf8O8O+8c/cogVk36QK+IB 3LX/w7JFFME6cC3kZ+mV3a6Cdxb4UIQdv1rWtLX8MjCiJ5+ax33VS0pe67n8sOft A6LeYwFr1ngk9NDg+OrFzExMTCGqk4aUYWiLd8ki3bw5ZMYzLwuenWLONQo3HOP5 QuWQV+wF913mjB53omiZ8heJ7hN3ez071W4rXXPGXn5sAGipqJKWk6Nvx1wRZapD d+6XozBLGNEIcPvWJAWDfxnHmEjVpFyhavc9Id569DcQ0WVLm+CFPkNmp4mgOoOB k8f6R2CA2lheIKTRUk/Lt+Cu2+Za/07bM/WsxL6x/oCXZwL6NA5P+8VoNcBCDKrF PVUz7Jad6FVHkxySqwX4clHLW173pqyG47RJ7KxVv7g6g+YNW0WCM7crS+czRWIq KUT9sumw1dEFlYZ9IGZTuP/Pvur8f17powkS8VuYJ02N1yq3OhQZb52NX8stsmkW P6CsdZe9KRoGQUJp9nYVE5j09oz1gqqdbLdn4Byqg6G50w2U1mLNaWE1rtWLtcTx h7npUNOaX44JafnClFJvv1R9ovkuzgTaymEL4qo3QB6COHdvjlA= =ON7q -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Three new drivers, support for some new models in existing ones and lots of various tweaks and improvements across the board (switching to using recommended APIs, code shrink and simplification, etc.). Also a new feature in the character device uAPI where we now notify the user-space about changes triggered by in-kernel users as well, not only when they were done by other user-space agents. Summary: GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - GPIO part of the MFD Congatec Board Controller - PolarFire GPIO controller - GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools" * tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits) gpio: tegra186: Allow to enable driver on Tegra234 gpio: grgpio: Add NULL check in grgpio_probe tools: gpio: Fix several incorrect format specifiers gpio: mpfs: add CoreGPIO support gpio: rockchip: support new version GPIO gpio: rockchip: change the GPIO version judgment logic gpio: rockchip: explan the format of the GPIO version ID gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) MAINTAINERS: add gpio driver to PolarFire entry gpio: Get rid of GPIOF_ACTIVE_LOW USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW leds: gpio: Avoid using GPIOF_ACTIVE_LOW Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW gpio: Use of_property_present() for non-boolean properties gpio: mpfs: add polarfire soc gpio support gpio: altera: Drop legacy-of-mm-gpiochip.h header gpio: pcie-idio-24: Replace deprecated PCI functions gpio: pci-idio-16: Replace deprecated PCI functions ... |
||
Linus Torvalds
|
7d75606665 |
pwm: Changes for v6.13-rc1
This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking |
||
Linus Torvalds
|
f2ef39727a |
spi: Updates for v6.13
The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers. The Rockchip cleanups -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY 013dIg7tiayUTOTcByCpzfMDWuzHig== =jc6e -----END PGP SIGNATURE----- Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers" * tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits) spi: imx: support word delay spi: imx: pass struct spi_transfer to prepare_transfer() spi: cs42l43: Add GPIO speaker id support to the bridge configuration spi: Delete useless checks spi: apple: Remove unnecessary .owner for apple_spi_driver spi: spidev_test: add support for word delay spi: apple: Add driver for Apple SPI controller spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers spi: Use of_property_present() for non-boolean properties spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time spi: spi-mem: rtl-snand: Correctly handle DMA transfers spi: tegra210-quad: Avoid shift-out-of-bounds spi: axi-spi-engine: Emit trace events for spi transfers dt-bindings: spi: sprd,sc9860-spi: convert to YAML spi: Replace deprecated PCI functions spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi spi: spi-mem: Add Realtek SPI-NAND controller dt-bindings: spi: Add realtek,rtl9301-snand spi: make class structs const spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema ... |
||
Linus Torvalds
|
4bd37a902a |
regulator: Updates for v6.13
This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7 9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G NO98rrcS9kVYaJ1z83KuMHeYBI44sQ== =AihX -----END PGP SIGNATURE----- Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat" * tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies regulator: Switch back to struct platform_driver::remove() regulator: doc: remove documentation comment for regulator_init regulator: doc: add missing documentation for init_cb regulator: rk808: Restrict DVS GPIOs to the RK808 variant only regulator: rk808: Use dev_err_probe() in the probe path regulator: rk808: Perform trivial code cleanups regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855 regulator: dt-bindings: lltc,ltc3676: convert to YAML regulator: core: Use fsleep() to get best sleep mechanism regulator: core: remove machine init callback from config regulator: core: add callback to perform runtime init regulator: core: do not silently ignore provided init_data regulator: max5970: Drop unused structs regulator: dt-bindings: vctrl-regulator: convert to YAML regulator: qcom-smd: make smd_vreg_rpm static regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe() regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0 regulator: Add devres version of of_regulator_get_optional() regulator: Add of_regulator_get_optional() for pure DT regulator lookup |
||
Linus Torvalds
|
37c7d3538a |
regmap: Updates for v6.13
The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7OlQACgkQJNaLcl1U h9B9nAf5AQIZ8AddQuudV4SoZbS2TWoGOOgjEXQnY245C4kNMnwJ1rIbHu7WJ/OE oVt7ePo7HW0CzpwIrNvdlV+9J3b+XR6xA1/rAJqI+TTPM3FMn33XGZ+0r+ZDVkBT 83/ZwLDPbRIVhwUgyHl0dIb5/pJddYVmJEDFHmRPY9Z8QQ4WPQn4SZvTfvF4y16C CJAV58A7Ei0MmnrJrGV3lF00qpkWMxdlpJu8TYgC1hM/hv9LAvVMEijuCpNR9NR5 udP+jPe2kA+IIlXEfvoxnJ/x9BgSf6CPLYV2nugFZsdGAfhI8EB3v/SC7gqlGVR7 tu4TR55KIh+lthRyD2uFRrI5GlzFvw== =epDO -----END PGP SIGNATURE----- Merge tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements" * tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: provide regmap_assign_bits() regmap: irq: Set lockdep class for hierarchical IRQ domains regmap: maple: Provide lockdep (sub)class for maple tree's internal lock regmap: kunit: Fix repeated test param regcache: Improve documentation of available cache types regmap: Specifically test writing 0 as a value to sparse caches regmap-irq: Consistently use memset32() in regmap_irq_thread() |
||
Linus Torvalds
|
856385e0c5 |
linux_kselftest-next-6.13-rc1
kselftest update for Linux 6.13-rc1 -- timers test - removes duplicates defines -- timers test - fixes to improve error reporting -- rtc test - adds check rtc alarm status to alarm test -- resctrl test - adds array overrun checks during iMC config parsing code -- resctrl test - adds array overflow checks when reading strings -- resctrl test - fixes and reorganizing code -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmc7o5wACgkQCwJExA0N QxyY6A//RD3Cvt/9Zt6jmuqKDnXkfM+Ry5CAzm+YYPegCLj+yVnzdps8Juf91vd/ KOmE0GaoTMu+Q3NEiNTTTlihYyTT3rA0JJYhAqfQ9b7m9QgMxSaTGhUDXjq83gXU ImbauuD1O3Sr84jLibdvWkgGfuhShz3a8ds3DzN+4S7xKMRguFsyYA/v4shugHMv X59gnuE2dtIFzHFOWJmTVuU3fyedcCiO6nUeIbaq6OFvz7dLKqMOP20r6YGfHUw+ oc640OwbijhLRHINmXGUV8d0B/kEkvljTXfqHdLUIzHVgvwHR4eMcWN6ErKa/knB Phhm6crhC1CNVk0cFdS/VZweOpIMs2A7oBdvtTs3ANz/7ne1IX39jtyoeONkrcBU jh5wIrSuyHLgM+812RCvagRyJ/yMTKkISJFrQDCKTUJTZ2Iq9vDQVSnXBfcYiVLU Ff7PCtlir2OtvdO3RuT8pmEeFTxBMmnXwr0tZ4N1YDMX1dE/5DQofY57XWYWXVGc usBDpzssZda8K155KJnL9HYTWv4sUwh7I6nF2z95kW6llGFKNtJthqx2sdLNIi27 PltopCXiKYtrL8HB3YY1+Oh3auL8NYlg49+W2J3zkbRCvRyJduVkPbZorqooQyLC 8sjZEzlPCj8RvjzQ+nxzl1xS/wwvB/JC8Hsfv9+GOC+XI0HZaNk= =TIPs -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "timer test: - remove duplicate defines - fixes to improve error reporting rtc test: - check rtc alarm status in alarm test resctrl test: - add array overrun checks during iMC config parsing code and when reading strings - fixes and reorganizing code" * tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) selftests/resctrl: Replace magic constants used as array size selftests/resctrl: Keep results from first test run selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth selftests/resctrl: Use cache size to determine "fill_buf" buffer size selftests/resctrl: Ensure measurements skip initialization of default benchmark selftests/resctrl: Make benchmark parameter passing robust selftests/resctrl: Remove unused measurement code selftests/resctrl: Only support measured read operation selftests/resctrl: Remove "once" parameter required to be false selftests/resctrl: Make wraparound handling obvious selftests/resctrl: Protect against array overflow when reading strings selftests/resctrl: Protect against array overrun during iMC config parsing selftests/resctrl: Fix memory overflow due to unhandled wraparound selftests/resctrl: Print accurate buffer size as part of MBM results selftests/resctrl: Make functions only used in same file static selftests: Add a test mangling with uc_sigmask selftests: Rename sigaltstack to generic signal selftest: rtc: Add to check rtc alarm status for alarm related test selftests:timers: remove local CLOCKID defines selftests: timers: Remove unneeded semicolon ... |
||
Linus Torvalds
|
f89a687aae |
kgdb patches for 6.13
A relatively modest collection of changes: * Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX family for better error checking of user input. * Align the print behavour when breakpoints are enabled and disabled by adopting the current behaviour of breakpoint disable for both. * Remove some of the (rather odd and user hostile) hex fallbacks and require kdb users to prefix with 0x instead. * Tidy up (and fix) control code handling in kdb's keyboard code. This makes the control code handling at the keyboard behave the same way as it does via the UART. * Switch my own entry in MAINTAINERS to my @kernel.org address. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAmc7bV4ACgkQfOMlXTn3 iKE9Mw/9G80KzejHGaSbzA17ELmxvCeQYQtnpbOiySpvzmIQWkOT7RBhqvqSD/+b 8tCT1aE/QHgkYRSIGTtCVILMSrJ1v2yJR5yuNOXAQgpwVCKq13hq4t7OFBpd+f2K kiY+UCpOOLb7okhjwT5I8hwI1wiHw9VOfcVq2BbBrcQPSoPfAI3iQ8PXUZHu4uq9 EB2OZskFxnIRtCJWXzEayXwzpD0mI9j0Ab+TEm32X3RU+BF0kGLfRvTKYl9jWkBc jsW4BKGOa+dfO5tu8zhVGxk5pssNeomaBNwRLD2EqtlmQJOkiGEk7qsR8z8aeETx uGbmfa4glrZj1V66bOeq9i+qqoAB9VY4TWw2/KSGOaQYsKHcK58EmSzq5nM0Abex rJbOBslsTYBMxz0z5qW8GyD20WtjgMSGtCmAu7OmlDJJdcksYsy6CY+gkfUsVS87 ZA4U0y8zvpyjMt2EKMS5o0/511bwzFtWtqEmiEBqfkX/NUJanaEBTt943NbnJEgu i8J+62B69G2X6gXjRZdncGC+MTWH/o93wmZk5u7bgdO0Wqk9t/EArILp4P9Ieco9 TpblPvcqEjfzBwkQKGMX5zhiR1YHzQn4sC4SmFUjczwuEjnmN0jEPMappG7bxI1c MEX5mPVQdRHO0N4jN/a7qC5PONbi8gKtnhfmCPbTGPwLF87DOEc= =rlg/ -----END PGP SIGNATURE----- Merge tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "A relatively modest collection of changes: - Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX family for better error checking of user input. - Align the print behavour when breakpoints are enabled and disabled by adopting the current behaviour of breakpoint disable for both. - Remove some of the (rather odd and user hostile) hex fallbacks and require kdb users to prefix with 0x instead. - Tidy up (and fix) control code handling in kdb's keyboard code. This makes the control code handling at the keyboard behave the same way as it does via the UART. - Switch my own entry in MAINTAINERS to my @kernel.org address" * tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: fix ctrl+e/a/f/b/d/p/n broken in keyboard mode MAINTAINERS: Use Daniel Thompson's korg address for kgdb work kdb: Fix breakpoint enable to be silent if already enabled kdb: Remove fallback interpretation of arbitrary numbers as hex trace: kdb: Replace simple_strtoul with kstrtoul in kdb_ftdump kdb: Replace the use of simple_strto with safer kstrto in kdb_main |
||
Linus Torvalds
|
aad3a0d084 |
ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4 There was a fix to locking in register_ftrace_graph() for shadow stacks that was sent upstream. But this code was also being rewritten, and the locking fix was needed. Merging this fix was required to continue the work. - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY= =6nCa -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ... |