Commit bbdd4ea219 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-7-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-6-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT1015
and RT1015p codecs used here can detect Headphone and Headset Mic
connections. Expose the former two to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-5-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT5682s,
NAU8825 and NAU8821 codecs used here can detect Headphone and Headset
Mic connections. Expose both to userspace as kcontrols and add the
necessary widgets. Split the jack and pin structs per-codec to
accommodate for per-codec differences.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-4-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-3-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-2-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5682 needs specific attention: there are two regmap in
rt5682_priv struct, one is sdw_regmap which is for IO transfer, and
the other is used for registers control.
We need to set both regmaps when we set cache only. Because if we set
rt5682->sdw_regmap only, rt5682->regmap won't set/get the right value
when it call regmap_write/read(rt5682->sdw_regmap, ...). If we set
rt5682->regmap only, regmap_write(rt5682->sdw_regmap, ...) is used
in rt5682_clock_config which will be called by the ..bus_config ops.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire bus may start after the probe where the SoundWire ASoC
components are registered. This creates a time window where the card
can be created and the registers be accessed.
As discussed on the mailing list, we can't really control when codecs
are enumerated and initialized, but we can make sure the access to the
codecs is cached until the hardware is accessible.
This patch configures regcache_cache_only() with a 'true' parameter in
the probe function, and a 'false' parameter in the io_init routine.
The rt5682 is handled through a different patch due to its specific
cache handling.
Link: https://lore.kernel.org/alsa-devel/20230503144102.242240-1-krzysztof.kozlowski@linaro.org/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the first batch of SoundWire codec drivers squelch
errors in the SoundWire probe callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1
Add support for them.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1
Add them to bindings to improve the hardware description.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One more PCI ID for the road.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add part ID to common include file
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need this in order to easily reuse register definitions
and some functions with Sound Open Firmware driver.
According to Documentation/process/license-rules.rst:
"Dual BSD/GPL" The module is dual licensed under a GPL v2
variant or BSD license choice. The exact
variant of the BSD license can only be
determined via the license information
in the corresponding source files.
so use "Dual BSD/GPL" for license string.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230803072638.640789-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mutex mutex_request_dram has no user.
Remove mutex_request_dram.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230803083908.9DxbPvOK@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use SET_SYSTEM_SLEEP_PM_OPS to simplify suspend and resume function.
fsl_micfil_suspend() and fsl_micfil_resume() can be deleted.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_micfil_use_verid() can help to parse the version info in VERID and
PARAM registers. Since the two registers are added only on i.MX93
platform, a member flag called use_verid is introduced to soc data
structure which indicates acquiring MICFIL version.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MICFIL IP is upgraded on i.MX93 platform. These new registers and new
bit definition are added to complete the register list.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Lots of small cleanups coming from Bard Liao and Charles Keepax for
SoundWire platforms, and minor additions for RVPs and Chromebooks.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
GCC11 provides an '-fanalyzer' static analysis option which does not
provide too many false-positives. This patch cleans-up known
problematic code paths to help enable this capability in CI. We've
used this for about a month already.
The switch component was never completed and sat half empty for over 3
years. It was recently deleted. For modern components this would
require not change in the kernel but since this was a legacy allocation
from the enum days of IPC3 we should mark the respective enum as
deprecated.
The splitter component was never even got a source file in the firmware.
Therefore also delete it since this is not needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For MediaTek AFE, DAI DMA can support different bitwidths compared to
the BE DAI. Therefore, it is preferable to obtain the BE frame format
from the DAI_CONFIG.
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
use 'part_id' to follow MIPI/SoundWire wording and use more consistent
%#x format.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move existing function in common library to make sure the code can be
reused by other SoC vendors.
No functionality change outside of the move and added prefix.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start removing Intel-specific arguments to make that function usable
by other SOC vendors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hoist the handling logic for group_generated up to the
sof_card_dai_links_create level. This avoids the need to pass the array
through multiple levels of functions.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename get_sdw_dailink_info to simply get_dailink_info and have it also
return the number of codecs present. Then hoist the allocation of the
codec conf structure up into sof_card_dai_links_create. This saves an
extra loop through the adr_link array, allows us to get rid of
sof_card_codec_conf_alloc and makes the allocation more explicit.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The counting of each of the types of DAI link is a bit messy with things
added onto an intermediate variable as it goes along. Re-order things a
little to keep the order consistent with the rest of the function and
simplify the process down to a variable for each type of DAI and then
sum them at the end.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs35l56 support in sof_sdw machine driver.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
