Add support for MFD based CODEC drivers, by allowing the CODEC name to
not be the SoundWire device directly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
create_codec_dai_name() is used to create codec component's information
in different adr links. We can and should break before we do anything.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The amp_num member of the info struct is zeroed at the start of
sof_card_dai_links_create, but then summed in mc_probe after
sof_card_dai_links_create is called. It is a little clearer to hoist the
initialisation out of sof_card_dai_links_create so it is on the same
level as the summation.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull the device and mach struct out of the card rather than explicitly
passing to sof_card_dai_links_create.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shuffle things around to group operations a little more, and
consistently use card->dev.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The address passed to find_codec_part_info should be const.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a return rather than a break and an additional range check.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A module device table is generally preferred over hard coding a
MODULE_ALIAS.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having two local variables called codec_idx and codec_index, that refer
to different things is a little confusing. Rename codec_idx to
codec_dlc_index to indicate it points into the dai_link_component array.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver makes extensive use of both ACPI link and ASoC DAI link
structs, often referring to both with the variable name link. Make the
code a little easier to follow by consistently using adr_link for the
ACPI bits and dai_links for the ASoC bits.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link_id parameter in create_sdw_dailink is actually the BE link id.
Rename it to be_id to be consistent with the caller and less confusion.
No functionality change.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The capture setting are missing and preventing topologies with
feedback from loading.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just sort Realtek codecs using increasing
part IDs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For soundwire config, SSP1 is used for BT offload. This is enabled
in sof_sdw_quirk_table
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for 2 streams of HDMI-In capture via I2S with rt5682s
codec variant
Reviewed-by: CBM <balamurugan.c@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support back to RPL devices that lost audio after the RPL/ADL
split. The hardware configuration is:
SSP0: 10EC5682/RTL5682 codec
SSP2: MAX98357A amplifier
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding RT711 sdca SDW codec support with SDW0 link for RPL RVP platforms
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_get_codec_dai() can return NULL, but that value is not
checked for, leading to static analysis warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/intel/atom/ reports a possible
NULL pointer dereference.
sound/soc/intel/atom/sst/sst_stream.c:221:40: error: dereference of
NULL ‘block’ [CWE-476] [-Werror=analyzer-null-dereference]
221 | unsigned char *r = block->data;
This is a false-positive, the GCC analyzer generated that report by
considering if (bytes->block) as true in some cases and false in
others.
We can simplify the code and use a local variable so that static
analysis does not try to look for cases where bytes->block can be
modified concurrently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_get_codec_dai() can return NULL, but that value is not
checked for, leading to false-positive static analysis warnings
sound/soc/intel/boards/bdw_rt286.c:190:16: error: dereference of NULL
‘codec_dai’ [CWE-476] [-Werror=analyzer-null-dereference]
190 | return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
‘card_suspend_pre’: event 1
|
| 190 | return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (1) dereference of NULL ‘codec_dai’
This NULL dereference cannot happen, the codec-dai "rt286-aif1" must exists
otherwise the card would not be created. Static analysis cannot know
that however so we might as well squelch this report.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mtk_adsp_ipc_get_data() can return NULL, but the value is not checked
before being used, leading to static analysis warnings.
sound/soc/sof/mediatek/mt8195/mt8195.c:90:32: error: dereference of
NULL ‘0’ [CWE-476] [-Werror=analyzer-null-dereference]
90 | spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
| ~~~~^~~~~~
It appears this is not really a possible problem, so remove those checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx_dsp_get_data() can return NULL, but the value is not checked
before being usd, leading to static analysis warnings.
sound/soc/sof/imx/imx8.c:85:32: error: dereference of NULL ‘0’
[CWE-476] [-Werror=analyzer-null-dereference]
85 | spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
| ~~~~^~~~~~
It appears this is not really a possible problem, so remove those checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports a possible NULL
pointer dereference.
sound/soc/sof/topology.c:1136:21: error: dereference of NULL ‘w’
[CWE-476] [-Werror=analyzer-null-dereference]
1136 | strcmp(w->sname, rtd->dai_link->stream_name))
The code is rather confusing and can be simplified to make static
analysis happy. No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports an issue with memcpy:
sound/soc/sof/ipc3.c: In function ‘ipc3_wait_tx_done’:
sound/soc/sof/ipc3.c:309:33: error: use of NULL ‘reply_data’ where
non-null expected [CWE-476] [-Werror=analyzer-null-argument]
309 | memcpy(reply_data, msg->reply_data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
310 | msg->reply_size);
The finding is legit with this call:
return sof_ipc3_tx_msg(sdev, &pm_ctx, sizeof(pm_ctx), NULL, 0, false);
Static analysis has no way of knowing that the reply will be zero-sized.
Add a check to only do the memcpy if the reply size is not zero and
the destination pointer is not NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports several NULL pointer
dereference paths.
sof_ipc4_probe_get_module_info() can return a NULL value, but it's
only tested in the init state. Static analyzers cannot know the probe
state machine and hence flags a potential issue for all calls of that
function.
Squelch these errors by adding the same check consistently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
A couple of minor clocking improvements that make the wm8960 driver work
a bit better with generic cards.
We implement a helper function to get number of codecs from ACPI
subsystem instead of using quirk flag in machine driver. Also refactor
module interface by adding max_98390_dai_link() function.
On the sof_rt5682 machine driver side, we remove the quirk flag
SOF_MAX98390_TWEETER_SPEAKER_PRESENT and use the new interface of
max98390 to setup dai link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731103419.2536036-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are part of "ASoC: add multi Component support" patch-set.
The patch-set supports below case as "2 Cards".
+-- basic board --------+
|+--------+ |
|| CPU ch0| <--> CodecA |
|| ch1| <-+ |
|+--------+ | |
+-------------|---------+
+-- expansion board ----+
| | |
| +-> CodecB|
+-----------------------+
Renesas sound driver and its Doc part were held for observation.
Rob mentioned that "definitions" vs "$defs". But I got error on "$defs",
no error on "definitions". I believe this change is not mandatory.
He also mentioned that "reg" is missing, but I also believe that "reg"
is automatically handled somehow/somewhere (I'm not sure detail, but other
reviewer indicated it before).
He also mentioned that "ports" and "port", but added new "ports" needs
special handling. Using "ports" vs "port" are different, not
compatible on this driver. This means we need both on Doc.
Thus, there is no update for these.
The wm8960 driver supports an automatic clocking mode which will use the
MCLK directly where possible and fall back to the PLL if there is no
suitable configuration directly using the MCLK. Clock 0 will be used by
the generic cards when configuring things, currently this is a MCLK only
mode but using AUTO mode would be more functional. Since the driver
still prefers to use MCLK directly where possible there should be no
negative impact on systems which are able to use MCLK directly.
As far as I can see nothing is using the system clock as part of the
ABI, the only reference I can see to a mode in a machine driver is the
Freescale i.MX card which uses the automatic mode with an explicit in
kernel call using the constant so will be unaffected.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-2-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have a MCLK provided by the clock API read the rate at startup
and store it so that there's something set before the machine driver has
done clocking configuration (eg, if it only configures clocking based on
sample rate).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-1-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert GTM601 binding to the YAML format.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730191742.117013-1-david@ixit.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
To enable multi Component support, "multi ports" is needed for Audio Graph
Card/Card2, and "multi rcar_sound,dai" is needed for Simple Audio Card.
This patch enable these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0oyb1li.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
renesas,rsnd uses both "ports" has "port", and these are very similar.
To avoid duplicated definitions, this patch adds common port-def.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sf9eb1ln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It calls rsnd_dai_of_node() to know it was called from Audio Graph
Card/Card2, or from Simple Audio Card. And after that, it gets
number of related DAIs.
To be more simple code, this patch merges these.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8eab1md.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd is using DAI ID to get own priv data without setting
driver->id. It was no problem for Single Component, but will be problem
in case of Multi Component, because it is not a DAI serial number.
struct snd_soc_dai *snd_soc_register_dai(...)
{
...
if (dai_drv->id)
dai->id = dai_drv->id;
else
dai->id = component->num_dai;
...
}
This patch sets driver->id, and get serial number.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wmyqb1mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTGiFsACgkQJNaLcl1U
h9ACTgf/WgvJ+Yei8UVtLYnX5SREfiKt0DV9/0fa15/JB1H24WtpaELdJkvzds04
3zypksuI9TsQiw6Cm8WwYb4XQdPx8I+996czKrG2fnMwOruyzUTAOd6XHiEAnLuO
8YwJDoN0R7qdVRTwiTqqdl7EyYHRoeUaPX0j5DB4YSVRsaV/9FRQykEMfUBa2//D
eRcOwoXcwZOghFBPXiFQrV6DDaStFk1a04PhpA8RCxPk7bPOQtZi5emLfnLcSJOr
CHFfCepYlWTRgioXg+sihWXqapc+zpiIRqRtAfkcAFfs0k4O59bzGVrKxCgmtjeW
r8oKqnfckrDmPThvYPBNP7UojQ5i7w==
=q83F
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test"
* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr
A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTGh5UACgkQJNaLcl1U
h9ASTQf/eziggz0mS9qgFaMjdJGyLQKvPOnX6OHDir+iCS28Kg1d+K6ifNLkKZcN
oF4m103lhled/XbY4frm7ZxDtdw9Kqi+wetad2qdJ7Aycr2gSdzISSdZ4tqrC9u5
BBICZaHZO2DaUa1o4qWmG9oa9mddSPkfdPJ9xMAqOEo189kvXHNPic4h/FKbagMd
HZQ+WMx4/hif/4+9vu+wYtIkaBd6UcTXqZYh5kAdJTA7izic8k3BnJVMeQ+A70dF
VklwQsolFYzlPF2QDxWOPOfjDcrzSRdxnfaNVQJeirGGwUvc3bvZBI5XZJaxQz/I
srm2xlKThU+TzLDiVqr4PHC+XN0XOQ==
=Tgbs
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue"
* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Fix incorrect VCN33 sync error message
regulator: mt6358: Sync VCN33_* enable status after checking ID
Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZMZBhg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTeQCgvq+ArxA52j9RXNSFIudQ+vWvnIkAoM1Jy/5q
Y+16cRAf6k4AbDXHbuyN
=V3uc
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems"
* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: misc: ehset: fix wrong if condition
usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
usb: gadget: call usb_gadget_check_config() to verify UDC capability
usb: typec: Use sysfs_emit_at when concatenating the string
usb: typec: Iterate pds array when showing the pd list
usb: typec: Set port->pd before adding device for typec_port
usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
Revert "usb: xhci: tegra: Fix error check"
USB: gadget: Fix the memory leak in raw_gadget driver
usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
USB: quirks: add quirk for Focusrite Scarlett
usb: xhci-mtk: set the dma max_seg_size
MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
usb: dwc3: don't reset device side if dwc3 was configured as host-only
usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
usb: ohci-at91: Fix the unhandle interrupt when resume
...
Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZMZCMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8fQCdGtm3DH+/BVKEebLUBlTb2Gz3xrIAnjeDVdP3
8Yztt4MNSYi7gvOMHQi5
=e8rX
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
Here are 3 small staging driver fixes for 6.5-rc4 that resolve some
reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZMZDFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIKwCgh6Oe4C3VbVP12bbfs/MKWqLzGLYAoNJyWYD9
6OmmXNgQ84j670cQiA60
=//aH
-----END PGP SIGNATURE-----
Merge tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
some reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems"
* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
staging: r8712: Fix memory leak in _r8712_init_xmit_priv()
Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert for
the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZMZD6A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynxZACgksV7C7yJWTm9UfZNZ2ABUhj69aEAnR/X9tLr
Sjtjo0iaoAZpE+2tjHt1
=J/gW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert
for the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers"
* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/genalloc: Name subpools by of_node_full_name()
Documentation: embargoed-hardware-issues.rst: add AMD to the list
Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
Documentation: security-bugs.rst: clarify CVE handling
Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group
- probe-events: Fix to add NULL check for some BTF API calls which can
return error code and NULL.
- ftrace selftests: Fix to check fprobe and kprobe event correctly. This
fixes a miss condition of the test command.
- kprobes: Prohibit probing on the function which starts from "__cfi_"
and "__pfx_" since those are auto generated for kernel CFI and not
executed.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmTGdH4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bmMAH/0qTHII0KYQDvrNJ40tT
SDM8+4zOJEtnjVYq87+4EWBhpVEL3VbLRJaprjXh40lZJrCP3MglCF152p4bOhgb
ZrjWuTAgE0N+rBhdeUJlzy3iLzl0G9dzfA+sn1XMcW+/HSPstJcjAG6wD7ROeZzL
XCxzE+NY6Y6mYbB52DaS8Hv7g7WccaTV+KeRjokhMPt+u7/KItJ4hQb/RXtAL31S
n4thCeVllaPBuc7m2CmKwJ9jzOg7/0qpAIUGx1Z+Khy/3YfRhG1nT93GxP8hLmad
SH9kGps09WXF5f8FbjYglOmq7ioDbIUz3oXPQRZYPymV8A0EU+b+/8IsRog1ySd1
BVk=
=qKWS
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
* Do not register IRQ bypass consumer if posted interrupts not supported
* Fix missed device interrupt due to non-atomic update of IRR
* Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
* Make VMREAD error path play nice with noinstr
* x86: Acquire SRCU read lock when handling fastpath MSR writes
* Support linking rseq tests statically against glibc 2.35+
* Fix reference count for stats file descriptors
* Detect userspace setting invalid CR0
Non-KVM:
* Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage",
acked by Greg)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmTGZycUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOoxQf+OFUHJwtYWJplE/KYHW1Fyo4NE1xx
IGyakObkA7sYrij43lH0VV4hL0IYv6Z5R6bU4uXyhFjJHsriEmr8Hq+Zug9XE09+
dsP8vZcai9t1ZZLKdI7uCrm4erDAVbeBrFLjUDb6GmPraWOVQOvJe+C3sZQfDWgp
26OO2EsjTM8liq46URrEUF8qzeWkl7eR9uYPpCKJJ5u3DYuXeq6znHRkEu1U2HYr
kuFCayhVZHDMAPGm20/pxK4PX+MU/5une/WLJlqEfOEMuAnbcLxNTJkHF7ntlH+V
FNIM3bWdIaNUH+tgaix3c4RdqWzUq9ubTiN+DyG1kPnDt7K2rmUFBvj1jg==
=9fND
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
between the lock waiters and the PI chain tree (->pi_waiters) of
a task by giving each tree their own sort key
-----BEGIN PGP SIGNATURE-----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=97eo
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
-----BEGIN PGP SIGNATURE-----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=49ii
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
