mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-09 06:33:34 +00:00
253751233b
45 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mark Rutland
|
ea3752ba96 |
arm64: module: mandate MODULE_PLTS
Contemporary kernels and modules can be relatively large, especially when common debug options are enabled. Using GCC 12.1.0, a v6.3-rc7 defconfig kernel is ~38M, and with PROVE_LOCKING + KASAN_INLINE enabled this expands to ~117M. Shanker reports [1] that the NVIDIA GPU driver alone can consume 110M of module space in some configurations. Both KASLR and ARM64_ERRATUM_843419 select MODULE_PLTS, so anyone wanting a kernel to have KASLR or run on Cortex-A53 will have MODULE_PLTS selected. This is the case in defconfig and distribution kernels (e.g. Debian, Android, etc). Practically speaking, this means we're very likely to need MODULE_PLTS and while it's almost guaranteed that MODULE_PLTS will be selected, it is possible to disable support, and we have to maintain some awkward special cases for such unusual configurations. This patch removes the MODULE_PLTS config option, with the support code always enabled if MODULES is selected. This results in a slight simplification, and will allow for further improvement in subsequent patches. For any config which currently selects MODULE_PLTS, there will be no functional change as a result of this patch. [1] https://lore.kernel.org/linux-arm-kernel/159ceeab-09af-3174-5058-445bc8dcf85b@nvidia.com/ Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Shanker Donthineni <sdonthineni@nvidia.com> Cc: Will Deacon <will@kernel.org> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Link: https://lore.kernel.org/r/20230530110328.2213762-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Florent Revest
|
0f59dca63b |
arm64: ftrace: Simplify get_ftrace_plt
Following recent refactorings, the get_ftrace_plt function only ever gets called with addr = FTRACE_ADDR so its code can be simplified to always return the ftrace trampoline plt. Signed-off-by: Florent Revest <revest@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230405180250.2046566-3-revest@chromium.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Florent Revest
|
2aa6ac0351 |
arm64: ftrace: Add direct call support
This builds up on the CALL_OPS work which extends the ftrace patchsite
on arm64 with an ops pointer usable by the ftrace trampoline.
This ops pointer is valid at all time. Indeed, it is either pointing to
ftrace_list_ops or to the single ops which should be called from that
patchsite.
There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function:
- If the direct called trampoline is within the reach of a BL
instruction
-> the ftrace patchsite jumps to the trampoline
- Else
-> the ftrace patchsite jumps to the ftrace_caller trampoline which
reads the ops pointer in the patchsite and jumps to the direct
call address stored in the ops
- Else
-> the ftrace patchsite jumps to the ftrace_caller trampoline and its
ops literal points to ftrace_list_ops so it iterates over all
registered ftrace ops, including the direct call ops and calls its
call_direct_funcs handler which stores the direct called
trampoline's address in the ftrace_regs and the ftrace_caller
trampoline will return to that address instead of returning to the
traced function
Signed-off-by: Florent Revest <revest@chromium.org>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230405180250.2046566-2-revest@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Mark Rutland
|
baaf553d3b |
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The main idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. Using a 64-bit literal avoids branch range limitations, and permits the ops to be swapped atomically without special considerations that apply to code-patching. In future this will also allow for the implementation of DYNAMIC_FTRACE_WITH_DIRECT_CALLS without branch range limitations by using additional fields in struct ftrace_ops. As noted in the core patch adding support for DYNAMIC_FTRACE_WITH_CALL_OPS, this approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. Currently, this approach is not compatible with CLANG_CFI, as the presence/absence of pre-function NOPs changes the offset of the pre-function type hash, and there's no existing mechanism to ensure a consistent offset for instrumented and uninstrumented functions. When CLANG_CFI is enabled, the existing scheme with a global ops->func pointer is used, and there should be no functional change. I am currently working with others to allow the two to work together in future (though this will liekly require updated compiler support). I've benchamrked this with the ftrace_ops sample module [1], which is not currently upstream, but available at: https://lore.kernel.org/lkml/20230103124912.2948963-1-mark.rutland@arm.com git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git ftrace-ops-sample-20230109 Using that module I measured the total time taken for 100,000 calls to a trivial instrumented function, with a number of tracers enabled with relevant filters (which would apply to the instrumented function) and a number of tracers enabled with irrelevant filters (which would not apply to the instrumented function). I tested on an M1 MacBook Pro, running under a HVF-accelerated QEMU VM (i.e. on real hardware). Before this patch: Number of tracers || Total time | Per-call average time (ns) Relevant | Irrelevant || (ns) | Total | Overhead =========+============++=============+==============+============ 0 | 0 || 94,583 | 0.95 | - 0 | 1 || 93,709 | 0.94 | - 0 | 2 || 93,666 | 0.94 | - 0 | 10 || 93,709 | 0.94 | - 0 | 100 || 93,792 | 0.94 | - ---------+------------++-------------+--------------+------------ 1 | 1 || 6,467,833 | 64.68 | 63.73 1 | 2 || 7,509,708 | 75.10 | 74.15 1 | 10 || 23,786,792 | 237.87 | 236.92 1 | 100 || 106,432,500 | 1,064.43 | 1063.38 ---------+------------++-------------+--------------+------------ 1 | 0 || 1,431,875 | 14.32 | 13.37 2 | 0 || 6,456,334 | 64.56 | 63.62 10 | 0 || 22,717,000 | 227.17 | 226.22 100 | 0 || 103,293,667 | 1032.94 | 1031.99 ---------+------------++-------------+--------------+-------------- Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. After this patch Number of tracers || Total time | Per-call average time (ns) Relevant | Irrelevant || (ns) | Total | Overhead =========+============++=============+==============+============ 0 | 0 || 94,541 | 0.95 | - 0 | 1 || 93,666 | 0.94 | - 0 | 2 || 93,709 | 0.94 | - 0 | 10 || 93,667 | 0.94 | - 0 | 100 || 93,792 | 0.94 | - ---------+------------++-------------+--------------+------------ 1 | 1 || 281,000 | 2.81 | 1.86 1 | 2 || 281,042 | 2.81 | 1.87 1 | 10 || 280,958 | 2.81 | 1.86 1 | 100 || 281,250 | 2.81 | 1.87 ---------+------------++-------------+--------------+------------ 1 | 0 || 280,959 | 2.81 | 1.86 2 | 0 || 6,502,708 | 65.03 | 64.08 10 | 0 || 18,681,209 | 186.81 | 185.87 100 | 0 || 103,550,458 | 1,035.50 | 1034.56 ---------+------------++-------------+--------------+------------ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/7 of the overhead prior to this series (from 13.37ns to 1.86ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. I've run the ftrace selftests from v6.2-rc3, which reports: | # of passed: 110 | # of failed: 0 | # of unresolved: 3 | # of untested: 0 | # of unsupported: 0 | # of xfailed: 1 | # of undefined(test bug): 0 ... where the unresolved entries were the tests for DIRECT functions (which are not supported), and the checkbashisms selftest (which is irrelevant here): | [8] Test ftrace direct functions against tracers [UNRESOLVED] | [9] Test ftrace direct functions against kprobes [UNRESOLVED] | [62] Meta-selftest: Checkbashisms [UNRESOLVED] ... with all other tests passing (or failing as expected). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Florent Revest <revest@chromium.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230123134603.1064407-9-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Rutland
|
90955d778a |
arm64: ftrace: Update stale comment
In commit:
|
||
|
Mark Rutland
|
cfce092dae |
ftrace: arm64: remove static ftrace
The build test robot pointer out that there's a build failure when: CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n ... due to some mismatched ifdeffery, some of which checks CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and some of which checks CONFIG_DYNAMIC_FTRACE_WITH_ARGS, leading to some missing definitions expected by the core code when CONFIG_DYNAMIC_FTRACE=n and consequently CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n. There's really not much point in supporting CONFIG_DYNAMIC_FTRACE=n (AKA static ftrace). All supported toolchains allow us to implement DYNAMIC_FTRACE, distributions all prefer DYNAMIC_FTRACE, and both powerpc and s390 removed support for static ftrace in commits: |
||
|
Mark Rutland
|
26299b3f6b |
ftrace: arm64: move from REGS to ARGS
This commit replaces arm64's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This removes some overhead and complexity, and
removes some latent issues with inconsistent presentation of struct
pt_regs (which can only be reliably saved/restored at exception
boundaries).
FTRACE_WITH_REGS has been supported on arm64 since commit:
|
||
|
Linus Torvalds
|
18fd049731 |
arm64 updates for 6.1:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE vector granule register added to the user regs together with SVE perf extensions documentation. - SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation to match the actual kernel behaviour (zeroing the registers on syscall rather than "zeroed or preserved" previously). - More conversions to automatic system registers generation. - vDSO: use self-synchronising virtual counter access in gettimeofday() if the architecture supports it. - arm64 stacktrace cleanups and improvements. - arm64 atomics improvements: always inline assembly, remove LL/SC trampolines. - Improve the reporting of EL1 exceptions: rework BTI and FPAC exception handling, better EL1 undefs reporting. - Cortex-A510 erratum 2658417: remove BF16 support due to incorrect result. - arm64 defconfig updates: build CoreSight as a module, enable options necessary for docker, memory hotplug/hotremove, enable all PMUs provided by Arm. - arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME extensions). - arm64 ftraces updates/fixes: fix module PLTs with mcount, remove unused function. - kselftest updates for arm64: simple HWCAP validation, FP stress test improvements, validation of ZA regs in signal handlers, include larger SVE and SME vector lengths in signal tests, various cleanups. - arm64 alternatives (code patching) improvements to robustness and consistency: replace cpucap static branches with equivalent alternatives, associate callback alternatives with a cpucap. - Miscellaneous updates: optimise kprobe performance of patching single-step slots, simplify uaccess_mask_ptr(), move MTE registers initialisation to C, support huge vmalloc() mappings, run softirqs on the per-CPU IRQ stack, compat (arm32) misalignment fixups for multiword accesses. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmM9W4cACgkQa9axLQDI XvEy3w/+LJ3KCFowWiz5gTAWikjv+UVssHjLMJixn47V7hsEFQ26Xnam/438rTMI kE95u6DHUpw2SMIxKzFRO7oI5cQtP+cWGwTtOUnjVO+U1oN+HqDOIbO9DbylWDcU eeeqMMmawMfTPuZrYklpOhXscsorbrKIvYBg7wHYOcwBYV3EPhWr89lwMvTVRuyJ qpX628KlkGMaBcONNhv3nS3qZcAOs0oHQCAVS4C8czLDL+vtJlumXUS3xr1Mqm72 xtFe7sje8Djr2kZ8mzh0GbFiZEBoBD3F/l7ayq8gVRaVpToUt8sk36Stjs4LojF1 6imuAfji/5TItkScq5KhGqj6MIugwp/eUVbRN74OLNTYx7msF1ZADNFQ+Q0UuY0H SYK13KvmOji0xjS8qAfhqrwNB79sk3fb+zF9LjETbdz4ZJCgg9gcFbSUTY0DvMfS MXZk/jVeB07olA8xYbjh0BRt4UV9xU628FPQzK5k7e4Nzl4jSvgtJZCZanfuVtjy /ZS1vbN8o7tQLBAlVnw+Exi/VedkKxkkMgm8tPKsMgERTFDx0Pc4Gs72hRpDnPWT MRbeCCGleAf3JQ5vF0coBDNOCEVvweQgShHOyHTz0GyhWXLCFx3RJICo5I4EIpps LLUk4JK0fO3LVrf1AEpu5ZP4+Sact0zfsH3gB7qyLPYFDmjDXD8= =jl3Z -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE vector granule register added to the user regs together with SVE perf extensions documentation. - SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation to match the actual kernel behaviour (zeroing the registers on syscall rather than "zeroed or preserved" previously). - More conversions to automatic system registers generation. - vDSO: use self-synchronising virtual counter access in gettimeofday() if the architecture supports it. - arm64 stacktrace cleanups and improvements. - arm64 atomics improvements: always inline assembly, remove LL/SC trampolines. - Improve the reporting of EL1 exceptions: rework BTI and FPAC exception handling, better EL1 undefs reporting. - Cortex-A510 erratum 2658417: remove BF16 support due to incorrect result. - arm64 defconfig updates: build CoreSight as a module, enable options necessary for docker, memory hotplug/hotremove, enable all PMUs provided by Arm. - arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME extensions). - arm64 ftraces updates/fixes: fix module PLTs with mcount, remove unused function. - kselftest updates for arm64: simple HWCAP validation, FP stress test improvements, validation of ZA regs in signal handlers, include larger SVE and SME vector lengths in signal tests, various cleanups. - arm64 alternatives (code patching) improvements to robustness and consistency: replace cpucap static branches with equivalent alternatives, associate callback alternatives with a cpucap. - Miscellaneous updates: optimise kprobe performance of patching single-step slots, simplify uaccess_mask_ptr(), move MTE registers initialisation to C, support huge vmalloc() mappings, run softirqs on the per-CPU IRQ stack, compat (arm32) misalignment fixups for multiword accesses. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits) arm64: alternatives: Use vdso/bits.h instead of linux/bits.h arm64/kprobe: Optimize the performance of patching single-step slot arm64: defconfig: Add Coresight as module kselftest/arm64: Handle EINTR while reading data from children kselftest/arm64: Flag fp-stress as exiting when we begin finishing up kselftest/arm64: Don't repeat termination handler for fp-stress ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs arm64/mm: fold check for KFENCE into can_set_direct_map() arm64: ftrace: fix module PLTs with mcount arm64: module: Remove unused plt_entry_is_initialized() arm64: module: Make plt_equals_entry() static arm64: fix the build with binutils 2.27 kselftest/arm64: Don't enable v8.5 for MTE selftest builds arm64: uaccess: simplify uaccess_mask_ptr() arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header kselftest/arm64: Fix typo in hwcap check arm64: mte: move register initialization to C arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate() arm64: dma: Drop cache invalidation from arch_dma_prep_coherent() arm64/sve: Add Perf extensions documentation ... |
||
|
Mark Rutland
|
8cfb08575c |
arm64: ftrace: fix module PLTs with mcount
Li Huafei reports that mcount-based ftrace with module PLTs was broken by commit: |
||
|
Sami Tolvanen
|
607289a7cd |
treewide: Drop function_nocfi
With -fsanitize=kcfi, we no longer need function_nocfi() as the compiler won't change function references to point to a jump table. Remove all implementations and uses of the macro. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-14-samitolvanen@google.com |
||
|
Mark Rutland
|
a625357997 |
arm64: ftrace: consistently handle PLTs.
Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: |
||
|
Mark Rutland
|
3eefdf9d1e |
arm64: ftrace: fix branch range checks
The branch range checks in ftrace_make_call() and ftrace_make_nop() are incorrect, erroneously permitting a forwards branch of 128M and erroneously rejecting a backwards branch of 128M. This is because both functions calculate the offset backwards, calculating the offset *from* the target *to* the branch, rather than the other way around as the later comparisons expect. If an out-of-range branch were erroeously permitted, this would later be rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks the bounds correctly, resulting in warnings and the placement of a BRK instruction. Note that this can only happen for a forwards branch of exactly 128M, and so the caller would need to be exactly 128M bytes below the relevant ftrace trampoline. If an in-range branch were erroeously rejected, then: * For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the use of a PLT entry, which is benign. Note that this is the common case, as this is selected by CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL), which distributions typically seelct. This is also selected by CONFIG_ARM64_ERRATUM_843419. * For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in internal ftrace failures. * For core kernel text, this would result in internal ftrace failues. Note that for this to happen, the kernel text would need to be at least 128M bytes in size, and typical configurations are smaller tha this. Fix this by calculating the offset *from* the branch *to* the target in both functions. Fixes: |
||
|
Chengming Zhou
|
c4a0ebf87c |
arm64/ftrace: Make function graph use ftrace directly
As we do in commit |
||
|
Mark Rutland
|
c6d3cd32fd |
arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
When CONFIG_FUNCTION_GRAPH_TRACER is selected and the function graph tracer is in use, unwind_frame() may erroneously associate a traced function with an incorrect return address. This can happen when starting an unwind from a pt_regs, or when unwinding across an exception boundary. This can be seen when recording with perf while the function graph tracer is in use. For example: | # echo function_graph > /sys/kernel/debug/tracing/current_tracer | # perf record -g -e raw_syscalls:sys_enter:k /bin/true | # perf report ... reports the callchain erroneously as: | el0t_64_sync | el0t_64_sync_handler | el0_svc_common.constprop.0 | perf_callchain | get_perf_callchain | syscall_trace_enter | syscall_trace_enter ... whereas when the function graph tracer is not in use, it reports: | el0t_64_sync | el0t_64_sync_handler | el0_svc | do_el0_svc | el0_svc_common.constprop.0 | syscall_trace_enter | syscall_trace_enter The underlying problem is that ftrace_graph_get_ret_stack() takes an index offset from the most recent entry added to the fgraph return stack. We start an unwind at offset 0, and increment the offset each time we encounter a rewritten return address (i.e. when we see `return_to_handler`). This is broken in two cases: 1) Between creating a pt_regs and starting the unwind, function calls may place entries on the stack, leaving an arbitrary offset which we can only determine by performing a full unwind from the caller of the unwind code (and relying on none of the unwind code being instrumented). This can result in erroneous entries being reported in a backtrace recorded by perf or kfence when the function graph tracer is in use. Currently show_regs() is unaffected as dump_backtrace() performs an initial unwind. 2) When unwinding across an exception boundary (whether continuing an unwind or starting a new unwind from regs), we currently always skip the LR of the interrupted context. Where this was live and contained a rewritten address, we won't consume the corresponding fgraph ret stack entry, leaving subsequent entries off-by-one. This can result in erroneous entries being reported in a backtrace performed by any in-kernel unwinder when that backtrace crosses an exception boundary, with entries after the boundary being reported incorrectly. This includes perf, kfence, show_regs(), panic(), etc. To fix this, we need to be able to uniquely identify each rewritten return address such that we can map this back to the original return address. We can use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR to associate each rewritten return address with a unique location on the stack. As the return address is passed in the LR (and so is not guaranteed a unique location in memory), we use the FP upon entry to the function (i.e. the address of the caller's frame record) as the return address pointer. Any nested call will have a different FP value as the caller must create its own frame record and update FP to point to this. Since ftrace_graph_ret_addr() requires the return address with the PAC stripped, the stripping of the PAC is moved before the fixup of the rewritten address. As we would unconditionally strip the PAC, moving this earlier is not harmful, and we can avoid a redundant strip in the return address fixup code. I've tested this with the perf case above, the ftrace selftests, and a number of ad-hoc unwinder tests. The tests all pass, and I have seen no unexpected behaviour as a result of this change. I've tested with pointer authentication under QEMU TCG where magic-sysrq+l correctly recovers the original return addresses. Note that this doesn't fix the issue of skipping a live LR at an exception boundary, which is a more general problem and requires more substantial rework. Were we to consume the LR in all cases this would result in warnings where the interrupted context's LR contains `return_to_handler`, but the FP has been altered, e.g. | func: | <--- ftrace entry ---> // logs FP & LR, rewrites LR | STP FP, LR, [SP, #-16]! | MOV FP, SP | <--- INTERRUPT ---> ... as ftrace_graph_get_ret_stack() fill not find a matching entry, triggering the WARN_ON_ONCE() in unwind_frame(). Link: https://lore.kernel.org/r/20211025164925.GB2001@C02TD0UTHF1T.local Link: https://lore.kernel.org/r/20211027132529.30027-1-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com> Cc: Mark Brown <broonie@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211029162245.39761-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Weizhao Ouyang
|
6644c654ea |
ftrace: Cleanup ftrace_dyn_arch_init()
Most of ARCHs use empty ftrace_dyn_arch_init(), introduce a weak common ftrace_dyn_arch_init() to cleanup them. Link: https://lkml.kernel.org/r/20210909090216.1955240-1-o451686892@gmail.com Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390) Acked-by: Helge Deller <deller@gmx.de> (parisc) Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Mark Rutland
|
78b92c7337 |
arm64: insn: decouple patching from insn code
Currently, <asm/insn.h> includes <asm/patching.h>. We intend that <asm/insn.h> will be usable from userspace, so it doesn't make sense to include headers for kernel-only features such as the patching routines, and we'd intended to restrict <asm/insn.h> to instruction encoding details. Let's decouple the patching code from <asm/insn.h>, and explicitly include <asm/patching.h> where it is needed. Since <asm/patching.h> isn't included from assembly, we can drop the __ASSEMBLY__ guards. At the same time, sort the kprobes includes so that it's easier to see what is and isn't incldued. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210609102301.17332-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Sami Tolvanen
|
800618f955 |
arm64: ftrace: use function_nocfi for ftrace_call
With CONFIG_CFI_CLANG, the compiler replaces function pointers with jump table addresses, which breaks dynamic ftrace as the address of ftrace_call is replaced with the address of ftrace_call.cfi_jt. Use function_nocfi() to get the address of the actual function instead. Suggested-by: Ben Dai <ben.dai@unisoc.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-17-samitolvanen@google.com |
||
|
Joe Perches
|
91970bef48 |
arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
CONFIG_FTRACE_WITH_REGS does not exist as a Kconfig symbol.
Fixes:
|
||
|
Mark Rutland
|
7f08ae53a7 |
arm64: ftrace: minimize ifdeffery
Now that we no longer refer to mod->arch.ftrace_trampolines in the body of ftrace_make_call(), we can use IS_ENABLED() rather than ifdeffery, and make the code easier to follow. Likewise in ftrace_make_nop(). Let's do so. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Torsten Duwe <duwe@suse.de> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Tested-by: Torsten Duwe <duwe@suse.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> |
||
|
Torsten Duwe
|
3b23e4991f |
arm64: implement ftrace with regs
This patch implements FTRACE_WITH_REGS for arm64, which allows a traced
function's arguments (and some other registers) to be captured into a
struct pt_regs, allowing these to be inspected and/or modified. This is
a building block for live-patching, where a function's arguments may be
forwarded to another function. This is also necessary to enable ftrace
and in-kernel pointer authentication at the same time, as it allows the
LR value to be captured and adjusted prior to signing.
Using GCC's -fpatchable-function-entry=N option, we can have the
compiler insert a configurable number of NOPs between the function entry
point and the usual prologue. This also ensures functions are AAPCS
compliant (e.g. disabling inter-procedural register allocation).
For example, with -fpatchable-function-entry=2, GCC 8.1.0 compiles the
following:
| unsigned long bar(void);
|
| unsigned long foo(void)
| {
| return bar() + 1;
| }
... to:
| <foo>:
| nop
| nop
| stp x29, x30, [sp, #-16]!
| mov x29, sp
| bl 0 <bar>
| add x0, x0, #0x1
| ldp x29, x30, [sp], #16
| ret
This patch builds the kernel with -fpatchable-function-entry=2,
prefixing each function with two NOPs. To trace a function, we replace
these NOPs with a sequence that saves the LR into a GPR, then calls an
ftrace entry assembly function which saves this and other relevant
registers:
| mov x9, x30
| bl <ftrace-entry>
Since patchable functions are AAPCS compliant (and the kernel does not
use x18 as a platform register), x9-x18 can be safely clobbered in the
patched sequence and the ftrace entry code.
There are now two ftrace entry functions, ftrace_regs_entry (which saves
all GPRs), and ftrace_entry (which saves the bare minimum). A PLT is
allocated for each within modules.
Signed-off-by: Torsten Duwe <duwe@suse.de>
[Mark: rework asm, comments, PLTs, initialization, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Tested-by: Torsten Duwe <duwe@suse.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Julien Thierry <jthierry@redhat.com>
Cc: Will Deacon <will@kernel.org>
|
||
|
Mark Rutland
|
f1a54ae9af |
arm64: module/ftrace: intialize PLT at load time
Currently we lazily-initialize a module's ftrace PLT at runtime when we install the first ftrace call. To do so we have to apply a number of sanity checks, transiently mark the module text as RW, and perform an IPI as part of handling Neoverse-N1 erratum #1542419. We only expect the ftrace trampoline to point at ftrace_caller() (AKA FTRACE_ADDR), so let's simplify all of this by intializing the PLT at module load time, before the module loader marks the module RO and performs the intial I-cache maintenance for the module. Thus we can rely on the module having been correctly intialized, and can simplify the runtime work necessary to install an ftrace call in a module. This will also allow for the removal of module_disable_ro(). Tested by forcing ftrace_make_call() to use the module PLT, and then loading up a module after setting up ftrace with: | echo ":mod:<module-name>" > set_ftrace_filter; | echo function > current_tracer; | modprobe <module-name> Since FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is selected, we wrap its use along with most of module_init_ftrace_plt() with ifdeffery rather than using IS_ENABLED(). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Torsten Duwe <duwe@suse.de> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Tested-by: Torsten Duwe <duwe@suse.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> |
||
|
James Morse
|
dd8a1f1348 |
arm64: ftrace: Ensure synchronisation in PLT setup for Neoverse-N1 #1542419
CPUs affected by Neoverse-N1 #1542419 may execute a stale instruction if it was recently modified. The affected sequence requires freshly written instructions to be executable before a branch to them is updated. There are very few places in the kernel that modify executable text, all but one come with sufficient synchronisation: * The module loader's flush_module_icache() calls flush_icache_range(), which does a kick_all_cpus_sync() * bpf_int_jit_compile() calls flush_icache_range(). * Kprobes calls aarch64_insn_patch_text(), which does its work in stop_machine(). * static keys and ftrace both patch between nops and branches to existing kernel code (not generated code). The affected sequence is the interaction between ftrace and modules. The module PLT is cleaned using __flush_icache_range() as the trampoline shouldn't be executable until we update the branch to it. Drop the double-underscore so that this path runs kick_all_cpus_sync() too. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Will Deacon
|
b6143d10d2 |
arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
The initial support for dynamic ftrace trampolines in modules made use of an indirect branch which loaded its target from the beginning of a special section ( |
||
|
Thomas Gleixner
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ard Biesheuvel
|
4e69ecf4da |
arm64/module: ftrace: deal with place relative nature of PLTs
Another bodge for the ftrace PLT code: plt_entries_equal() now takes the place relative nature of the ADRP/ADD based PLT entries into account, which means that a struct trampoline instance on the stack is no longer equal to the same set of opcodes in the module struct, given that they don't point to the same place in memory anymore. Work around this by using memcmp() in the ftrace PLT handling code. Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Ard Biesheuvel
|
5a3ae7b314 |
arm64/ftrace: fix inadvertent BUG() in trampoline check
The ftrace trampoline code (which deals with modules loaded out of
BL range of the core kernel) uses plt_entries_equal() to check whether
the per-module trampoline equals a zero buffer, to decide whether the
trampoline has already been initialized.
This triggers a BUG() in the opcode manipulation code, since we end
up checking the ADRP offset of a 0x0 opcode, which is not an ADRP
instruction.
So instead, add a helper to check whether a PLT is initialized, and
call that from the frace code.
Cc: <stable@vger.kernel.org> # v5.0
Fixes:
|
||
|
Linus Torvalds
|
495d714ad1 |
Tracing changes for v4.21:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure.
This will allow for multiple users of hooking onto functions
to get the callback (return) of the function. This is the ground
work for having kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently
is a similar function strstart() that is used in a few places, but
only returns a bool and not a length. These instances will be
removed in the future to use str_has_prefix() instead.
- A few other various clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
=u96o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
|
||
|
Linus Torvalds
|
5694cecdb0 |
arm64 festive updates for 4.21
In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0 lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8= =sYdt -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 festive updates from Will Deacon: "In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits) arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset() arm64: sysreg: Use _BITUL() when defining register bits arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4 arm64: docs: document pointer authentication arm64: ptr auth: Move per-thread keys from thread_info to thread_struct arm64: enable pointer authentication arm64: add prctl control for resetting ptrauth keys arm64: perf: strip PAC when unwinding userspace arm64: expose user PAC bit positions via ptrace arm64: add basic pointer authentication support arm64/cpufeature: detect pointer authentication arm64: Don't trap host pointer auth use to EL2 arm64/kvm: hide ptrauth from guests arm64/kvm: consistently handle host HCR_EL2 flags arm64: add pointer authentication register bits arm64: add comments about EC exception levels arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field arm64: enable per-task stack canaries ... |
||
|
Steven Rostedt (VMware)
|
e4c07bf986 |
arm64: ftrace: Set FTRACE_MAY_SLEEP before ftrace_modify_all_code()
It has been reported that ftrace_replace_code() which is called by ftrace_modify_all_code() can cause a soft lockup warning for an allmodconfig kernel. This is because all the debug options enabled causes the loop in ftrace_replace_code() (which loops over all the functions being enabled where there can be 10s of thousands), is too slow, and never schedules out. To solve this, setting FTRACE_MAY_SLEEP to the command passed into ftrace_replace_code() will make it call cond_resched() in the loop, which prevents the soft lockup warning from triggering. Link: http://lkml.kernel.org/r/20181204192903.8193-1-anders.roxell@linaro.org Link: http://lkml.kernel.org/r/20181205183304.000714627@goodmis.org Acked-by: Will Deacon <will.deacon@arm.com> Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Mark Rutland
|
7dc48bf96a |
arm64: ftrace: always pass instrumented pc in x0
The core ftrace hooks take the instrumented PC in x0, but for some reason arm64's prepare_ftrace_return() takes this in x1. For consistency, let's flip the argument order and always pass the instrumented PC in x0. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Steven Rostedt (VMware)
|
01e0ab2c4f |
arm64: function_graph: Simplify with function_graph_enter()
The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().
Have arm64 use the new code, and remove the shadow stack management as well as
having to set up the trace structure.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@kernel.org
Fixes:
|
||
|
Ard Biesheuvel
|
bdb85cd1d2 |
arm64/module: switch to ADRP/ADD sequences for PLT entries
Now that we have switched to the small code model entirely, and reduced the extended KASLR range to 4 GB, we can be sure that the targets of relative branches that are out of range are in range for a ADRP/ADD pair, which is one instruction shorter than our current MOVN/MOVK/MOVK sequence, and is more idiomatic and so it is more likely to be implemented efficiently by micro-architectures. So switch over the ordinary PLT code and the special handling of the Cortex-A53 ADRP errata, as well as the ftrace trampline handling. Reviewed-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: Added a couple of comments in the plt equality check] Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Ard Biesheuvel
|
be0f272bfc |
arm64: ftrace: emit ftrace-mod.o contents through code
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built with the kernel and contains a trampoline that is linked into each module, so that modules can be loaded far away from the kernel and still reach the ftrace entry point in the core kernel with an ordinary relative branch, as is emitted by the compiler instrumentation code dynamic ftrace relies on. In order to be able to build out of tree modules, this object file needs to be included into the linux-headers or linux-devel packages, which is undesirable, as it makes arm64 a special case (although a precedent does exist for 32-bit PPC). Given that the trampoline essentially consists of a PLT entry, let's not bother with a source or object file for it, and simply patch it in whenever the trampoline is being populated, using the existing PLT support routines. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Mark Rutland
|
8486e54d30 |
arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels
When a kernel is built without CONFIG_ARM64_MODULE_PLTS, we don't generate the expected branch instruction in ftrace_make_nop(). This means we pass zero (rather than a valid branch) to ftrace_modify_code() as the expected instruction to validate. This causes us to return -EINVAL to the core ftrace code for a valid case, resulting in a splat at boot time. This was an unintended effect of commit: |
||
|
Will Deacon
|
687644209a |
arm64: ftrace: fix building without CONFIG_MODULES
When CONFIG_MODULES is disabled, we cannot dereference a module pointer:
arch/arm64/kernel/ftrace.c: In function 'ftrace_make_call':
arch/arm64/kernel/ftrace.c:107:36: error: dereferencing pointer to incomplete type 'struct module'
trampoline = (unsigned long *)mod->arch.ftrace_trampoline;
Also, the within_module() function is not defined:
arch/arm64/kernel/ftrace.c: In function 'ftrace_make_nop':
arch/arm64/kernel/ftrace.c:171:8: error: implicit declaration of function 'within_module'; did you mean 'init_module'? [-Werror=implicit-function-declaration]
This addresses both by adding replacing the IS_ENABLED(CONFIG_ARM64_MODULE_PLTS)
checks with #ifdef versions.
Fixes:
|
||
|
Ard Biesheuvel
|
e71a4e1beb |
arm64: ftrace: add support for far branches to dynamic ftrace
Currently, dynamic ftrace support in the arm64 kernel assumes that all core kernel code is within range of ordinary branch instructions that occur in module code, which is usually the case, but is no longer guaranteed now that we have support for module PLTs and address space randomization. Since on arm64, all patching of branch instructions involves function calls to the same entry point [ftrace_caller()], we can emit the modules with a trampoline that has unlimited range, and patch both the trampoline itself and the branch instruction to redirect the call via the trampoline. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: minor clarification to smp_wmb() comment] Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Ard Biesheuvel
|
f8af0b364e |
arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()
When turning branch instructions into NOPs, we attempt to validate the action by comparing the old value at the call site with the opcode of a direct relative branch instruction pointing at the old target. However, these call sites are statically initialized to call _mcount(), and may be redirected via a PLT entry if the module is loaded far away from the kernel text, leading to false negatives and spurious errors. So skip the validation if CONFIG_ARM64_MODULE_PLTS is configured. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Josh Poimboeuf
|
9a7c348ba6 |
ftrace: Add return address pointer to ftrace_ret_stack
Storing this value will help prevent unwinders from getting out of sync with the function graph tracer ret_stack. Now instead of needing a stateful iterator, they can compare the return address pointer to find the right ret_stack entry. Note that an array of 50 ftrace_ret_stack structs is allocated for every task. So when an arch implements this, it will add either 200 or 400 bytes of memory usage per task (depending on whether it's a 32-bit or 64-bit platform). Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a95cfcc39e8f26b89a430c56926af0bb217bc0a1.1471607358.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
AKASHI Takahiro
|
79fdee9b63 |
arm64: ftrace: modify a stack frame in a safe way
Function graph tracer modifies a return address (LR) in a stack frame by calling ftrace_prepare_return() in a traced function's function prologue. The current code does this modification before preserving an original address at ftrace_push_return_trace() and there is always a small window of inconsistency when an interrupt occurs. This doesn't matter, as far as an interrupt stack is introduced, because stack tracer won't be invoked in an interrupt context. But it would be better to proactively minimize such a window by moving the LR modification after ftrace_push_return_trace(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Li Bin
|
004ab584e0 |
arm64: ftrace: fix the comments for ftrace_modify_code
There is no need to worry about module and __init text disappearing case, because that ftrace has a module notifier that is called when a module is being unloaded and before the text goes away and this code grabs the ftrace_lock mutex and removes the module functions from the ftrace list, such that it will no longer do any modifications to that module's text, the update to make functions be traced or not is done under the ftrace_lock mutex as well. And by now, __init section codes should not been modified by ftrace, because it is black listed in recordmcount.c and ignored by ftrace. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Li Bin
|
81a6a146e8 |
arm64: ftrace: stop using kstop_machine to enable/disable tracing
For ftrace on arm64, kstop_machine which is hugely disruptive to a running system is not needed to convert nops to ftrace calls or back, because that to be modified instrucions, that NOP, B or BL, are all safe instructions which called "concurrent modification and execution of instructions", that can be executed by one thread of execution as they are being modified by another thread of execution without requiring explicit synchronization. Signed-off-by: Li Bin <huawei.libin@huawei.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Pratyush Anand
|
d0d6223018 |
arm64: ftrace: fix ftrace_modify_graph_caller for branch replace
ftrace_enable_ftrace_graph_caller and ftrace_disable_ftrace_graph_caller
should replace B(jmp) instruction and not BL(call) instruction.
Commit 9f1ae7596aad("arm64: Correct ftrace calls to
aarch64_insn_gen_branch_imm()") had a typo and used
AARCH64_INSN_BRANCH_LINK instead of AARCH64_INSN_BRANCH_NOLINK.
Either instruction will work, as the link register is saved/restored
across the branch but this better matches the intention of the code.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
||
|
Catalin Marinas
|
9f1ae7596a |
arm64: Correct ftrace calls to aarch64_insn_gen_branch_imm()
The aarch64_insn_gen_branch_imm() function takes an enum as the last argument rather than a bool. It happens to work because AARCH64_INSN_BRANCH_LINK matches 'true' but better to use the actual type. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
AKASHI Takahiro
|
bd7d38dbdf |
arm64: ftrace: Add dynamic ftrace support
This patch allows "dynamic ftrace" if CONFIG_DYNAMIC_FTRACE is enabled. Here we can turn on and off tracing dynamically per-function base. On arm64, this is done by patching single branch instruction to _mcount() inserted by gcc -pg option. The branch is replaced to NOP initially at kernel start up, and later on, NOP to branch to ftrace_caller() when enabled or branch to NOP when disabled. Please note that ftrace_caller() is a counterpart of _mcount() in case of 'static' ftrace. More details on architecture specific requirements are described in Documentation/trace/ftrace-design.txt. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
AKASHI Takahiro
|
819e50e25d |
arm64: Add ftrace support
This patch implements arm64 specific part to support function tracers,
such as function (CONFIG_FUNCTION_TRACER), function_graph
(CONFIG_FUNCTION_GRAPH_TRACER) and function profiler
(CONFIG_FUNCTION_PROFILER).
With 'function' tracer, all the functions in the kernel are traced with
timestamps in ${sysfs}/tracing/trace. If function_graph tracer is
specified, call graph is generated.
The kernel must be compiled with -pg option so that _mcount() is inserted
at the beginning of functions. This function is called on every function's
entry as long as tracing is enabled.
In addition, function_graph tracer also needs to be able to probe function's
exit. ftrace_graph_caller() & return_to_handler do this by faking link
register's value to intercept function's return path.
More details on architecture specific requirements are described in
Documentation/trace/ftrace-design.txt.
Reviewed-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|