mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-16 18:26:42 +00:00
14405 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
341d041daa |
iommufd 6.13 merge window pull
Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing
memory for an iommu mapping. To date VFIO/iommufd have used VMA's and
pin_user_pages(), this now allows using memfds and memfd_pin_folios().
Notably this creates a pure folio path from the memfd to the iommu page
table where memory is never broken down to PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two
processes. Combined with the above this allows iommufd to support a VMM
re-start using exec() where something like qemu would exec() a new
version of itself and fd pass the memfds/iommufd/etc to the new
process. The memfd allows DMA access to the memory to continue while
the new process is getting setup, and the CHANGE_PROCESS updates all
the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual
iommu. This will be used by VMMs to access hardware features that are
contained with in a VM. The first use is to inform the kernel of the
virtual SID to physical SID mapping when issuing SID based invalidation
on ARM. Further uses will tie HW features that are directly accessed by
the VM, such as invalidation queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used to
translate VM issued cache invalidation commands from virtual to physical
device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with
the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE
the driver can model this HW's behavior for nested translation. This
includes a shared branch from Will.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZzzKKwAKCRCFwuHvBreF
YaCMAQDOQAgw87eUYKnY7vFodlsTUA2E8uSxDmk6nPWySd0NKwD/flOP85MdEs9O
Ot+RoL4/J3IyNH+eg5kN68odmx4mAw8=
=ec8x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the
backing memory for an iommu mapping. To date VFIO/iommufd have used
VMA's and pin_user_pages(), this now allows using memfds and
memfd_pin_folios(). Notably this creates a pure folio path from the
memfd to the iommu page table where memory is never broken down to
PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between
two processes. Combined with the above this allows iommufd to
support a VMM re-start using exec() where something like qemu would
exec() a new version of itself and fd pass the memfds/iommufd/etc
to the new process. The memfd allows DMA access to the memory to
continue while the new process is getting setup, and the
CHANGE_PROCESS updates all the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed
virtual iommu. This will be used by VMMs to access hardware
features that are contained with in a VM. The first use is to
inform the kernel of the virtual SID to physical SID mapping when
issuing SID based invalidation on ARM. Further uses will tie HW
features that are directly accessed by the VM, such as invalidation
queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used
to translate VM issued cache invalidation commands from virtual to
physical device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work
with the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and
VDEVICE the driver can model this HW's behavior for nested
translation. This includes a shared branch from Will"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits)
iommu/arm-smmu-v3: Import IOMMUFD module namespace
iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
iommufd: Lock all IOAS objects
iommufd: Export do_update_pinned
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Use S2FWB for NESTED domains
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Documentation: userspace-api: iommufd: Update vDEVICE
iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command
iommufd/selftest: Add mock_viommu_cache_invalidate
iommufd/viommu: Add iommufd_viommu_find_dev helper
iommu: Add iommu_copy_struct_from_full_user_array helper
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
iommu/viommu: Add cache_invalidate to iommufd_viommu_ops
iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
...
|
||
|
Linus Torvalds
|
2dde263d81 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WikACgkQnJ2qBz9k QNnZdwf9FfT95zhnNWk3ohNOh5BO0P/uTY2fNkQBDPLPY3Bi8nywPIjXYCDSOgX1 SBV0rakkWp+rVO1/qkg5J1mUvBoefzT7O17rG0LfRw3zjHPX+XeO+e3Xf/kPmJHJ 3fvN//VTZQ6uPcn8PWgLe8VVQqNXD3nlUrwz/JKaxyodsdm0ERej4QZjG6Cikotk aKuDPAnOiS37/lIFZGdJRca/rwJPwMekNt1SxVrnmin0/QfB/Uubba2+NNdQ+z3W SCA/26PK822T3ELB8BkfwpdINC17WUwDJlkC8qha/JRzDlxJC/ysr43fHn/7Adfb CthG8V4JDGm51jcC0qe0Yk2HV75U4A== =htHs -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "A couple of smaller random fsnotify fixes" * tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Fix ordering of iput() and watched_objects decrement fsnotify: fix sending inotify event with unexpected filename fanotify: allow reporting errors on failure to open fd fsnotify, lsm: Decouple fsnotify from lsm |
||
|
Linus Torvalds
|
c01f664e4c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY adWNOMGWdNNQXPFgGbL5yZwNZ64kRA== =Eq1B -----END PGP SIGNATURE----- Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
|
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
6e95ef0258 |
bpf-next-bpf-next-6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmc7hIQACgkQ6rmadz2v bTrcRA/+MsUOzJPnjokonHwk8X4KQM21gOua/sUcGArLVGF/JoW5/b1W8UBQ0y5+ +okYaRNGpwF0/2S8M5FAYpM7VSPLl1U7Rihr55I63D9kbAo0pDQwpn4afQFuZhaC l7MzkhBHS7XXx5/70APOzy3kz1GDYvz39jiWuAAhRqVejFO+fa4pDz4W+Ht7jYTQ jJOLn4vJna9fSfVf/U/bbdz5lL0lncIiEnRIEbF7EszbF2CA7sa+/KFENGM7ChEo UlxK2Xz5fpzgT6htZRjMr6jmupfg7gzdT4moOysQQcjkllvv6/4MD0s/GLShtG9H SmpaptpYCEGXLuApGzkSddwiT6iUMTqQr7zs6LPp0gPh+4Z0sSPNoBtBp2v0aVDl w0zhVhMfoF66rMG+IZY684CsMGg5h8UsOS46KLjSU0fW2HpGM7+zZLpXOaGkU3OH UV0womPT/C2kS2fpOn9F91O8qMjOZ4EXd+zuRtIRv9CeuVIpCT9R13lEYn+wfr6d aUci8wybha1UOAvkRiXiqWOPS+0Z/arrSbCSDMQF6DevLpQl0noVbTVssWXcRdUE 9Ve6J0yS29WxNWFtuuw4xP5NcG1AnRXVGh215TuVBX7xK9X/hnDDhfalltsjXfnd m1f64FxU2SGp2D7X8BX/6Aeyo6mITE6I3SNMUrcvk1Zid36zhy8= =TXGS -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ... |
||
|
Linus Torvalds
|
79caa6c88a |
asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC
style inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys()
and phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
-----BEGIN PGP SIGNATURE-----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=zEHk
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
||
|
Linus Torvalds
|
9f5a6a1fe6 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ... |
||
|
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Linus Torvalds
|
f41dac3efb |
Performance events changes for v6.13:
- Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
- Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian Hunter)
- VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
- New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
- Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ItOT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
||
|
Linus Torvalds
|
cd7fa3e1b0 |
Thermal control updates for 6.13-rc1
- Add support for thermal thresholds that can be added and removed from
user space via netlink along with a related library update (Daniel
Lezcano).
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki).
- Rearrange locking in the thermal core to use guards (Rafael Wysocki).
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table walks
in the thermal core (Rafael Wysocki).
- Fix and clean up the thermal testing facility code (Rafael Wysocki).
- Fix a Power Allocator thermal governor issue (ZhengShaobo).
-----BEGIN PGP SIGNATURE-----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=Pb3D
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are thermal core changes, including the addition of support for
temperature thresholds that can be set from user space, fixes related
to thermal zone initialization, suspend/resume and exit, locking
rework and rearrangement of the code handling thermal zone temperature
updates.
Specifics:
- Add support for thermal thresholds that can be added and removed
from user space via netlink along with a related library update
(Daniel Lezcano)
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki)
- Rearrange locking in the thermal core to use guards (Rafael
Wysocki)
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table
walks in the thermal core (Rafael Wysocki)
- Fix and clean up the thermal testing facility code (Rafael Wysocki)
- Fix a Power Allocator thermal governor issue (ZhengShaobo)"
* tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (45 commits)
thermal: testing: Initialize some variables annoteded with _free()
thermal: testing: Use DEFINE_FREE() and __free() to simplify code
thermal: testing: Simplify tt_get_tt_zone()
thermal: gov_power_allocator: Granted power set to max when nobody request power
thermal: core: Relocate thermal zone initialization routine
thermal: core: Use trip lists for trip crossing detection
thermal: core: Eliminate thermal_zone_trip_down()
thermal: core: Relocate functions that update trip points
thermal: core: Move some trip processing to thermal_trip_crossed()
thermal: core: Pass trip descriptor to thermal_trip_crossed()
thermal: core: Rearrange __thermal_zone_device_update()
thermal: core: Prepare for moving trips between sorted lists
thermal: core: Rename trip list node in struct thermal_trip_desc
thermal: core: Build sorted lists instead of sorting them later
thermal/lib: Fix memory leak on error in thermal_genl_auto()
thermal: thresholds: Fix thermal lock annotation issue
tools/thermal/thermal-engine: Take into account the thresholds API
tools/lib/thermal: Add the threshold netlink ABI
tools/lib/thermal: Make more generic the command encoding function
thermal: netlink: Add the commands and the events for the thresholds
...
|
||
|
Linus Torvalds
|
02b2f1a7b8 |
This update includes the following changes:
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
||
|
Kees Cook
|
96c677fca5 |
UAPI: ethtool: Avoid flex-array in struct ethtool_link_settings
struct ethtool_link_settings tends to be used as a header for other structures that have trailing bytes[1], but has a trailing flexible array itself. Using this overlapped with other structures leads to ambiguous object sizing in the compiler, so we want to avoid such situations (which have caused real bugs in the past). Detecting this can be done with -Wflex-array-member-not-at-end, which will need to be enabled globally. Using a tagged struct_group() to create a new ethtool_link_settings_hdr structure isn't possible as it seems we cannot use the tagged variant of struct_group() due to syntax issues from C++'s perspective (even within "extern C")[2]. Instead, we can just leave the offending member defined in UAPI and remove it from the kernel's view of the structure, as Linux doesn't actually use this member at all. There is also no change in size since it was already a flexible array that didn't contribute to size returned by any use of sizeof(). Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/lkml/20241109100213.262a2fa0@kernel.org/ [2] Link: https://lore.kernel.org/lkml/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org/ [1] Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-3-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kees Cook
|
ebda123fe7 |
Revert "UAPI: ethtool: Use __struct_group() in struct ethtool_link_settings"
This reverts commit 43d3487035e9a86fad952de4240a518614240d43. We cannot use tagged struct groups in UAPI because C++ will throw syntax errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-2-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
ba1f9c8fe3 |
arm64 updates for 6.13:
* Support for running Linux in a protected VM under the Arm Confidential
Compute Architecture (CCA)
* Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from libc
* AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
* Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously only
exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing the
signal handler in line with the x86 behaviour for 6.12
* arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access control
- Switch back to platform_driver::remove() now that it returns 'void'
- Add some missing events for the CXL PMU driver
* Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
-----BEGIN PGP SIGNATURE-----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=wDot
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
||
|
Linus Torvalds
|
8350142a4b |
for-6.13/io_uring-20241118
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S3kQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjHVEAC+CITBEcGy+S0IK0BpIAhuA+A621LtqBwy 0z/4MZKXMqvWxcFGQJ9Zr8MvxUnY4KFcssiaR5zk+I9TczNu7mLMuPYD1Gb0Klgz mwuFOylo1CAAC41IABYZZ/0qWbTaW0p8tpaGsTbTNk3tBxuMLB550+APAqC1OE9U bb7rP+FHc5+YGI9/7JNWt7NNTSHvVSO6oxjltCxHr1dRg93Jtr2jaY6letY3epFz TCFyfJlDtK8fPwtYRyG51M4g2Vdp9/4qsfPqvnXwUr9MdWaVh5/TFkyvqDi5sCKM zdK/sjRiimYzvqqKg6bzgYscITUPNk2TG6ZJq5U1L7lrglzVY69c7GIUnNzPrL/y AxQsR5Guxz3bRNYWZ4BKJDH+NNB+cgIFEXDsv72qoUy3HTzA6wOPZYxfjhZhKuG/ DjRwM7NGx5oPiKtpK99IulZttXdmtkH0csuLwKmOzrQskQdTuWyrEtU7UQql7oQ5 Rt3DhMXouzYZMicB8U5Q9gO2I3WN+2VVxXl4sa00LG8KsT6PzLnz4Q2k/1c83S6J rRivRbZAbZ1+BqKvF8T7GgzLCeaLgzbeoxmxj6xr87pf3SYEs2KhQeQ+n/C0HTOt GOcG1+bvh7t2aSvlBPKVCExWI4erwG6wXFhfGKsLW9CmwIMqRNxdePpRWe3Cueyp M3QRJuvTxQ== =bDvp -----END PGP SIGNATURE----- Merge tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanups of the eventfd handling code, making it fully private. - Support for sending a sync message to another ring, without having a ring available to send a normal async message. - Get rid of the separate unlocked hash table, unify everything around the single locked one. - Add support for ring resizing. It can be hard to appropriately size the CQ ring upfront, if the application doesn't know how busy it will be. This results in applications sizing rings for the most busy case, which can be wasteful. With ring resizing, they can start small and grow the ring, if needed. - Add support for fixed wait regions, rather than needing to copy the same wait data tons of times for each wait operation. - Rewrite the resource node handling, which before was serialized per ring. This caused issues with particularly fixed files, where one file waiting on IO could hold up putting and freeing of other unrelated files. Now each node is handled separately. New code is much simpler too, and was a net 250 line reduction in code. - Add support for just doing partial buffer clones, rather than always cloning the entire buffer table. - Series adding static NAPI support, where a specific NAPI instance is used rather than having a list of them available that need lookup. - Add support for mapped regions, and also convert the fixed wait support mentioned above to that concept. This avoids doing special mappings for various planned features, and folds the existing registered wait into that too. - Add support for hybrid IO polling, which is a variant of strict IOPOLL but with an initial sleep delay to avoid spinning too early and wasting resources on devices that aren't necessarily in the < 5 usec category wrt latencies. - Various cleanups and little fixes. * tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux: (79 commits) io_uring/region: fix error codes after failed vmap io_uring: restore back registered wait arguments io_uring: add memory region registration io_uring: introduce concept of memory regions io_uring: temporarily disable registered waits io_uring: disable ENTER_EXT_ARG_REG for IOPOLL io_uring: fortify io_pin_pages with a warning switch io_msg_ring() to CLASS(fd) io_uring: fix invalid hybrid polling ctx leaks io_uring/uring_cmd: fix buffer index retrieval io_uring/rsrc: add & apply io_req_assign_buf_node() io_uring/rsrc: remove '->ctx_ptr' of 'struct io_rsrc_node' io_uring/rsrc: pass 'struct io_ring_ctx' reference to rsrc helpers io_uring: avoid normal tw intermediate fallback io_uring/napi: add static napi tracking strategy io_uring/napi: clean up __io_napi_do_busy_loop io_uring/napi: Use lock guards io_uring/napi: improve __io_napi_add io_uring/napi: fix io_napi_entry RCU accesses io_uring/napi: protect concurrent io_napi_entry timeout accesses ... |
||
|
Linus Torvalds
|
77a0cfafa9 |
for-6.13/block-20241118
-----BEGIN PGP SIGNATURE-----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=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
||
|
Linus Torvalds
|
c14a8a4c04 |
for-6.13-tag
-----BEGIN PGP SIGNATURE-----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=aAcf
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
|
||
|
Linus Torvalds
|
c6d64479d6 |
sanitize struct filename and lookup flags handling in statx
and friends Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdpZQAKCRBZ7Krx/gZQ 6whMAQDhlGFV+nGRetwe4t60mVRpxIoc71GLC7b6V8FmyfTI5AEAkAigkJ8KCZDP mfGsN/3PtzoxnIkIqdk7Y7q4/fowyAw= =4DWZ -----END PGP SIGNATURE----- Merge tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull statx updates from Al Viro: "Sanitize struct filename and lookup flags handling in statx and friends" * tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: libfs: kill empty_dir_getattr() fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag fs/stat.c: switch to CLASS(fd_raw) kill getname_statx_lookup_flags() io_statx_prep(): use getname_uflags() |
||
|
Linus Torvalds
|
82339c4911 |
sanitize xattr and io_uring interactions with it,
add *xattrat() syscalls, sanitize struct filename handling in there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdj4gAKCRBZ7Krx/gZQ 6/02AQC8ndn9i1wLGRb5DdZYGNWUDhXCdPrZCF2nyvU2swCIPwEAm1H5F/bxBXeT 6qCLHThVw4KTJOT2aDY03ELrxbi8Vg4= =35Oj -----END PGP SIGNATURE----- Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull xattr updates from Al Viro: "Sanitize xattr and io_uring interactions with it, add *xattrat() syscalls, sanitize struct filename handling in there" * tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr: remove redundant check on variable err fs/xattr: add *at family syscalls new helpers: file_removexattr(), filename_removexattr() new helpers: file_listxattr(), filename_listxattr() replace do_getxattr() with saner helpers. replace do_setxattr() with saner helpers. new helper: import_xattr_name() fs: rename struct xattr_ctx to kernel_xattr_ctx xattr: switch to CLASS(fd) io_[gs]etxattr_prep(): just use getname() io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE getname_maybe_null() - the third variant of pathname copy-in teach filename_lookup() to treat NULL filename as "" |
||
|
Linus Torvalds
|
909d3b571e |
vfs-6.13.pidfs
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcg9wAKCRCRxhvAZXjc ou7GAQDtQ75C+DFjrL4alXjYG7uly0BWgrlRJ4SgNu1I0uUYdgD/UHH2fAkQeKGy xTGT4z0abiELZw9RQ7F6qbiBhA0nIw8= =Plww -----END PGP SIGNATURE----- Merge tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull pidfs update from Christian Brauner: "This adds a new ioctl to retrieve information about a pidfd. A common pattern when using pidfds is having to get information about the process, which currently requires /proc being mounted, resolving the fd to a pid, and then do manual string parsing of /proc/N/status and friends. This needs to be reimplemented over and over in all userspace projects (e.g.: it has been reimplemented in systemd, dbus, dbus-daemon, polkit so far), and requires additional care in checking that the fd is still valid after having parsed the data, to avoid races. Having a programmatic API that can be used directly removes all these requirements, including having /proc mounted. As discussed at LPC24, add an ioctl with an extensible struct so that more parameters can be added later if needed. Start with returning pid/tgid/ppid and some creds unconditionally, and cgroupid optionally" * tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: pidfd: add ioctl to retrieve pid info |
||
|
Linus Torvalds
|
70e7730c2a |
vfs-6.13.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcToAAKCRCRxhvAZXjc
osL9AP948FFumJRC28gDJ4xp+X4eohNOfkgoEG8FTbF2zU6ulwD+O0pr26FqpFli
pqlG+38UdATImpfqqWjPbb72sBYcfQg=
=wLUh
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce8623567 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a6e ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
|
||
|
David S. Miller
|
296a681def |
ipsec-next-2024-11-15
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmc3A/gACgkQrB3Eaf9P W7fNew//XCIhIvFYaQcP2x84T4EYB679NkGlwMATxXgn40+sp7muSwVweynEWNIu FltfBAwYD/MxD7g519abVPMWXs/iYI5duw3vvqnxmkOoebWLLocg2VoqFIdVXlQw /hj+1X/oNT4OKcaQAw/FAGRuYvkc90YB/rRG51RwAIR0tyBjRwfUsozMM8QX/zQI I0cLCgGAf/kylQre+dhvUkMhXaLogMF5v0qzPxhyMBD02JaUpe6+5cdHQcmKOhqa ksTpySYnIKIHZrLizeFGDZpinaDIph20vGaDvDXpqTYFuwvCQsZczJy02dF4otf2 2dZz6+2La+ZM+WsGIqpALqKCNhr8fOcQxCRH3eGLPBwoXXt5CFAMgJKob8hKuonW FgJaYMBZOjYbgGah8WbEe/YsWq4y3uRs48pFtY+T5cn7AskNxIvUoLNjSS83Hlqu PJbveiKsZygig966Q/zUFATYnvj3zEgjVEcSbK6LRyBXL79Njr8l+PZ0Zoz76tc4 bF1Xv0x+lRYmwa9rvOFaeqrP/GTe0xvlitFzuCN7HnXiN8URKnnDY2odkXYzo+Z7 MBbP8wR/CaoiAvdMw74116nAIFOW95LPtvdGJTvlS9jAOt1P7dWQ3/mFKEpItndv cJjWzI7HKl0+85FcCDw+tmsDWWGbALUyPw96i8UgUcDGyqVKUgA= =Ioo8 -----END PGP SIGNATURE----- Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next-11-15 1) Add support for RFC 9611 per cpu xfrm state handling. 2) Add inbound and outbound xfrm state caches to speed up state lookups. 3) Convert xfrm to dscp_t. From Guillaume Nault. 4) Fix error handling in build_aevent. From Everest K.C. 5) Replace strncpy with strscpy_pad in copy_to_user_auth. From Daniel Yang. 6) Fix an uninitialized symbol during acquire state insertion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Pavel Begunkov
|
d617b3147d |
io_uring: restore back registered wait arguments
Now we've got a more generic region registration API, place
IORING_ENTER_EXT_ARG_REG and re-enable it.
First, the user has to register a region with the
IORING_MEM_REGION_REG_WAIT_ARG flag set. It can only be done for a
ring in a disabled state, aka IORING_SETUP_R_DISABLED, to avoid races
with already running waiters. With that we should have stable constant
values for ctx->cq_wait_{size,arg} in io_get_ext_arg_reg() and hence no
READ_ONCE required.
The other API difference is that we're now passing byte offsets instead
of indexes. The user _must_ align all offsets / pointers to the native
word size, failing to do so might but not necessarily has to lead to a
failure usually returned as -EFAULT. liburing will be hiding this
details from users.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/81822c1b4ffbe8ad391b4f9ad1564def0d26d990.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
Pavel Begunkov
|
93238e6618 |
io_uring: add memory region registration
Regions will serve multiple purposes. First, with it we can decouple ring/etc. object creation from registration / mapping of the memory they will be placed in. We already have hacks that allow to put both SQ and CQ into the same huge page, in the future we should be able to: region = create_region(io_ring); create_pbuf_ring(io_uring, region, offset=0); create_pbuf_ring(io_uring, region, offset=N); The second use case is efficiently passing parameters. The following patch enables back on top of regions IORING_ENTER_EXT_ARG_REG, which optimises wait arguments. It'll also be useful for request arguments replacing iovecs, msghdr, etc. pointers. Eventually it would also be handy for BPF as well if it comes to fruition. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0798cf3a14fad19cfc96fc9feca5f3e11481691d.1731689588.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Pavel Begunkov
|
dfbbfbf191 |
io_uring: introduce concept of memory regions
We've got a good number of mappings we share with the userspace, that includes the main rings, provided buffer rings, upcoming rings for zerocopy rx and more. All of them duplicate user argument parsing and some internal details as well (page pinnning, huge page optimisations, mmap'ing, etc.) Introduce a notion of regions. For userspace for now it's just a new structure called struct io_uring_region_desc which is supposed to parameterise all such mapping / queue creations. A region either represents a user provided chunk of memory, in which case the user_addr field should point to it, or a request for the kernel to allocate the memory, in which case the user would need to mmap it after using the offset returned in the mmap_offset field. With a uniform userspace API we can avoid additional boiler plate code and apply future optimisation to all of them at once. Internally, there is a new structure struct io_mapped_region holding all relevant runtime information and some helpers to work with it. This patch limits it to user provided regions. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0e6fe25818dfbaebd1bd90b870a6cac503fe1a24.1731689588.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Pavel Begunkov
|
83e041522e |
io_uring: temporarily disable registered waits
Disable wait argument registration as it'll be replaced with a more generic feature. We'll still need IORING_ENTER_EXT_ARG_REG parsing in a few commits so leave it be. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/70b1d1d218c41ba77a76d1789c8641dab0b0563e.1731689588.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jeremy Sowden
|
b0ccf4f53d |
netfilter: bitwise: add support for doing AND, OR and XOR directly
Hitherto, these operations have been converted in user space to mask-and-xor operations on one register and two immediate values, and it is the latter which have been evaluated by the kernel. We add support for evaluating these operations directly in kernel space on one register and either an immediate value or a second register. Pablo made a few changes to the original patch: - EINVAL if NFTA_BITWISE_SREG2 is used with fast version. - Allow _AND,_OR,_XOR with _DATA != sizeof(u32) - Dump _SREG2 or _DATA with _AND,_OR,_XOR Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Jeremy Sowden
|
a12143e608 |
netfilter: bitwise: rename some boolean operation functions
In the next patch we add support for doing AND, OR and XOR operations directly in the kernel, so rename some functions and an enum constant related to mask-and-xor boolean operations. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Steve Sistare
|
829ed62649 |
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
Add an ioctl that updates all DMA mappings to reflect the current process, Change the mm and transfer locked memory accounting from old to current mm. This will be used for live update, allowing an old process to hand the iommufd device descriptor to a new process. The new process calls the ioctl. IOMMU_IOAS_CHANGE_PROCESS only supports DMA mappings created with IOMMU_IOAS_MAP_FILE, because the kernel metadata for such mappings does not depend on the userland VA of the pages (which is different in the new process). IOMMU_IOAS_CHANGE_PROCESS fails if other types of mappings are present. This is a revised version of code originally provided by Jason. Link: https://patch.msgid.link/r/1731527497-16091-4-git-send-email-steven.sistare@oracle.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Christian Brauner
|
aefff51e1c |
statmount: retrieve security mount options
Add the ability to retrieve security mount options. Keep them separate from filesystem specific mount options so it's easy to tell them apart. Also allow to retrieve them separate from other mount options as most of the time users won't be interested in security specific mount options. Link: https://lore.kernel.org/r/20241114-radtour-ofenrohr-ff34b567b40a@brauner Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Catalin Marinas
|
5a4332062e |
Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', 'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
||
|
Alexei Starovoitov
|
8714381703 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890f2 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Stefan Berger
|
95f567f81e |
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
Commit 8a924db2d7b5 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface
function")' introduced the AT_GETATTR_NOSEC flag to ensure that the
call paths only call vfs_getattr_nosec if it is set instead of vfs_getattr.
Now, simplify the getattr interface functions of filesystems where the flag
AT_GETATTR_NOSEC is checked.
There is only a single caller of inode_operations getattr function and it
is located in fs/stat.c in vfs_getattr_nosec. The caller there is the only
one from which the AT_GETATTR_NOSEC flag is passed from.
Two filesystems are checking this flag in .getattr and the flag is always
passed to them unconditionally from only vfs_getattr_nosec:
- ecryptfs: Simplify by always calling vfs_getattr_nosec in
ecryptfs_getattr. From there the flag is passed to no other
function and this function is not called otherwise.
- overlayfs: Simplify by always calling vfs_getattr_nosec in
ovl_getattr. From there the flag is passed to no other
function and this function is not called otherwise.
The query_flags in vfs_getattr_nosec will mask-out AT_GETATTR_NOSEC from
any caller using AT_STATX_SYNC_TYPE as mask so that the flag is not
important inside this function. Also, since no filesystem is checking the
flag anymore, remove the flag entirely now, including the BUG_ON check that
never triggered.
The net change of the changes here combined with the original commit is
that ecryptfs and overlayfs do not call vfs_getattr but only
vfs_getattr_nosec.
Fixes: 8a924db2d7b5 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface function")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Closes: https://lore.kernel.org/linux-fsdevel/20241101011724.GN1350452@ZenIV/T/#u
Cc: Tyler Hicks <code@tyhicks.com>
Cc: ecryptfs@vger.kernel.org
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: linux-unionfs@vger.kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||
|
Miklos Szeredi
|
2f4d4503e9
|
statmount: add flag to retrieve unescaped options
Filesystem options can be retrieved with STATMOUNT_MNT_OPTS, which
returns a string of comma separated options, where some characters are
escaped using the \OOO notation.
Add a new flag, STATMOUNT_OPT_ARRAY, which instead returns the raw
option values separated with '\0' charaters.
Since escaped charaters are rare, this inteface is preferable for
non-libmount users which likley don't want to deal with option
de-escaping.
Example code:
if (st->mask & STATMOUNT_OPT_ARRAY) {
const char *opt = st->str + st->opt_array;
for (unsigned int i = 0; i < st->opt_num; i++) {
printf("opt_array[%i]: <%s>\n", i, opt);
opt += strlen(opt) + 1;
}
}
Example ouput:
(1) mnt_opts: <lowerdir+=/l\054w\054r,lowerdir+=/l\054w\054r1,upperdir=/upp\054r,workdir=/w\054rk,redirect_dir=nofollow,uuid=null>
(2) opt_array[0]: <lowerdir+=/l,w,r>
opt_array[1]: <lowerdir+=/l,w,r1>
opt_array[2]: <upperdir=/upp,r>
opt_array[3]: <workdir=/w,rk>
opt_array[4]: <redirect_dir=nofollow>
opt_array[5]: <uuid=null>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20241112101006.30715-1-mszeredi@redhat.com
Acked-by: Jeff Layton <jlayton@kernel.org>
[brauner: tweak variable naming and parsing add example output]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Jeff Layton
|
44010543fc
|
fs: add the ability for statmount() to report the sb_source
/proc/self/mountinfo displays the source for the mount, but statmount() doesn't yet have a way to return it. Add a new STATMOUNT_SB_SOURCE flag, claim the 32-bit __spare1 field to hold the offset into the str[] array. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20241111-statmount-v4-3-2eaf35d07a80@kernel.org Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Nicolin Chen
|
d68beb276b |
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
Implement the vIOMMU's cache_invalidate op for user space to invalidate the IOTLB entries, Device ATS and CD entries that are cached by hardware. Add struct iommu_viommu_arm_smmuv3_invalidate defining invalidation entries that are simply in the native format of a 128-bit TLBI command. Scan those commands against the permitted command list and fix their VMID/SID fields to match what is stored in the vIOMMU. Link: https://patch.msgid.link/r/12-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Co-developed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Co-developed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jason Gunthorpe
|
f27298a82b |
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
The EATS flag needs to flow through the vSTE and into the pSTE, and ensure physical ATS is enabled on the PCI device. The physical ATS state must match the VM's idea of EATS as we rely on the VM to issue the ATS invalidation commands. Thus ATS must remain off at the device until EATS on a nesting domain turns it on. Attaching a nesting domain is the point where the invalidation responsibility transfers to userspace. Update the ATS logic to track EATS for nesting domains and flush the ATC whenever the S2 nesting parent changes. Link: https://patch.msgid.link/r/11-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jason Gunthorpe
|
1e8be08d1c |
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
For SMMUv3 a IOMMU_DOMAIN_NESTED is composed of a S2 iommu_domain acting as the parent and a user provided STE fragment that defines the CD table and related data with addresses translated by the S2 iommu_domain. The kernel only permits userspace to control certain allowed bits of the STE that are safe for user/guest control. IOTLB maintenance is a bit subtle here, the S1 implicitly includes the S2 translation, but there is no way of knowing which S1 entries refer to a range of S2. For the IOTLB we follow ARM's guidance and issue a CMDQ_OP_TLBI_NH_ALL to flush all ASIDs from the VMID after flushing the S2 on any change to the S2. The IOMMU_DOMAIN_NESTED can only be created from inside a VIOMMU as the invalidation path relies on the VIOMMU to translate virtual stream ID used in the invalidation commands for the CD table and ATS. Link: https://patch.msgid.link/r/9-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Nicolin Chen
|
69d9b312f3 |
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Add a new driver-type for ARM SMMUv3 to enum iommu_viommu_type. Implement an arm_vsmmu_alloc(). As an initial step, copy the VMID from s2_parent. A followup series is required to give the VIOMMU object it's own VMID that will be used in all nesting configurations. Link: https://patch.msgid.link/r/8-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jason Gunthorpe
|
4e6bd13aa3 |
Merge branch 'iommufd/arm-smmuv3-nested' of iommu/linux into iommufd for-next
Common SMMUv3 patches for the following patches adding nesting, shared branch with the iommu tree. * 'iommufd/arm-smmuv3-nested' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/arm-smmu-v3: Expose the arm_smmu_attach interface iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT iommu/arm-smmu-v3: Support IOMMU_GET_HW_INFO via struct arm_smmu_hw_info iommu/arm-smmu-v3: Report IOMMU_CAP_ENFORCE_CACHE_COHERENCY for CANWBS ACPI/IORT: Support CANWBS memory access flag ACPICA: IORT: Update for revision E.f vfio: Remove VFIO_TYPE1_NESTING_IOMMU ... Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Nicolin Chen
|
54ce69e36c |
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
With a vIOMMU object, use space can flush any IOMMU related cache that can be directed via a vIOMMU object. It is similar to the IOMMU_HWPT_INVALIDATE uAPI, but can cover a wider range than IOTLB, e.g. device/desciprtor cache. Allow hwpt_id of the iommu_hwpt_invalidate structure to carry a viommu_id, and reuse the IOMMU_HWPT_INVALIDATE uAPI for vIOMMU invalidations. Drivers can define different structures for vIOMMU invalidations v.s. HWPT ones. Since both the HWPT-based and vIOMMU-based invalidation pathways check own cache invalidation op, remove the WARN_ON_ONCE in the allocator. Update the uAPI, kdoc, and selftest case accordingly. Link: https://patch.msgid.link/r/b411e2245e303b8a964f39f49453a5dff280968f.1730836308.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Nicolin Chen
|
0ce5c2477a |
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
Introduce a new IOMMUFD_OBJ_VDEVICE to represent a physical device (struct device) against a vIOMMU (struct iommufd_viommu) object in a VM. This vDEVICE object (and its structure) holds all the infos and attributes in the VM, regarding the device related to the vIOMMU. As an initial patch, add a per-vIOMMU virtual ID. This can be: - Virtual StreamID on a nested ARM SMMUv3, an index to a Stream Table - Virtual DeviceID on a nested AMD IOMMU, an index to a Device Table - Virtual RID on a nested Intel VT-D IOMMU, an index to a Context Table Potentially, this vDEVICE structure would hold some vData for Confidential Compute Architecture (CCA). Use this virtual ID to index an "vdevs" xarray that belongs to a vIOMMU object. Add a new ioctl for vDEVICE allocations. Since a vDEVICE is a connection of a device object and an iommufd_viommu object, take two refcounts in the ioctl handler. Link: https://patch.msgid.link/r/cda8fd2263166e61b8191a3b3207e0d2b08545bf.1730836308.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Nicolin Chen
|
13a750180f |
iommufd: Allow pt_id to carry viommu_id for IOMMU_HWPT_ALLOC
Now a vIOMMU holds a shareable nesting parent HWPT. So, it can act like that nesting parent HWPT to allocate a nested HWPT. Support that in the IOMMU_HWPT_ALLOC ioctl handler, and update its kdoc. Also, add an iommufd_viommu_alloc_hwpt_nested helper to allocate a nested HWPT for a vIOMMU object. Since a vIOMMU object holds the parent hwpt's refcount already, increase the refcount of the vIOMMU only. Link: https://patch.msgid.link/r/a0f24f32bfada8b448d17587adcaedeeb50a67ed.1730836219.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Nicolin Chen
|
4db97c21ed |
iommufd/viommu: Add IOMMU_VIOMMU_ALLOC ioctl
Add a new ioctl for user space to do a vIOMMU allocation. It must be based on a nesting parent HWPT, so take its refcount. IOMMU driver wanting to support vIOMMUs must define its IOMMU_VIOMMU_TYPE_ in the uAPI header and implement a viommu_alloc op in its iommu_ops. Link: https://patch.msgid.link/r/dc2b8ba9ac935007beff07c1761c31cd097ed780.1730836219.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jeff Layton
|
ed9d95f691
|
fs: add the ability for statmount() to report the fs_subtype
/proc/self/mountinfo prints out the sb->s_subtype after the type. This is particularly useful for disambiguating FUSE mounts (at least when the userland driver bothers to set it). Add STATMOUNT_FS_SUBTYPE and claim one of the __spare2 fields to point to the offset into the str[] array. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20241111-statmount-v4-2-2eaf35d07a80@kernel.org Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Martin Karsten
|
5dc51ec86d |
net: Add napi_struct parameter irq_suspend_timeout
Add a per-NAPI IRQ suspension parameter, which can be get/set with netdev-genl. This patch doesn't change any behavior but prepares the code for other changes in the following commits which use irq_suspend_timeout as a timeout for IRQ suspension. Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Co-developed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jiri Olsa
|
d920179b3d |
bpf: Add support for uprobe multi session attach
Adding support to attach BPF program for entry and return probe of the same function. This is common use case which at the moment requires to create two uprobe multi links. Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs kernel to attach single link program to both entry and exit probe. It's possible to control execution of the BPF program on return probe simply by returning zero or non zero from the entry BPF program execution to execute or not the BPF program on return probe respectively. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org |
||
|
Rafael J. Wysocki
|
c285b11e28 | Merge back thermal control material for 6.13 | ||
|
David Sterba
|
6c83d153ed |
btrfs: add new ioctl to wait for cleaned subvolumes
Add a new unprivileged ioctl that will let the command 'btrfs subvolume sync' work without the (privileged) SEARCH_TREE ioctl. There are several modes of operation, where the most common ones are to wait on a specific subvolume or all currently queued for cleaning. This is utilized e.g. in backup applications that delete subvolumes and wait until they're cleaned to check for remaining space. The other modes are for flexibility, e.g. for monitoring or checkpoints in the queue of deleted subvolumes, again without the need to use SEARCH_TREE. Notes: - waiting is interruptible, the timeout is set to 1 second and is not configurable - repeated calls to the ioctl see a different state, so this is inherently racy when using e.g. the count or peek next/last Use cases: - a subvolume A was deleted, wait for cleaning (WAIT_FOR_ONE) - a bunch of subvolumes were deleted, wait for all (WAIT_FOR_QUEUED or PEEK_LAST + WAIT_FOR_ONE) - count how many are queued (not blocking), for monitoring purposes - report progress (PEEK_NEXT), may miss some if cleaning is quick - own waiting in user space (PEEK_LAST until it's 0) Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Mauro Carvalho Chehab
|
5516200c46 |
Linux 6.12-rc7
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
+kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
7mx6XrM=
=HYUx
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
|