i.MX6SL and i.MX6SX SPDIF blocks are compatible with i.MX35.
Document 'fsl,imx35-spdif' as a fallback compatible for these two
chip variants.
This fixes the following dt-schema warnings:
compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif'] is too long
compatible: ['fsl,imx6sx-spdif', 'fsl,imx35-spdif'] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20241028020749.36972-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "sound/soc/sh" directory has been renamed to "sound/soc/renesas".
Update the reference in renesas,rsnd.txt to reflect the new file path
for consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Describe the adau1373 Low Power Codec with Speaker and
Headphone Amplifier.
While at it, properly add a MAINTAINERS entry for ADI sound bindings.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241028-adau1373-shutdown-v2-2-647f56bbd182@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This patch set adds a driver for the Cirrus Logic CS42L84 codec. This chip
is (so far) found only on Apple Silicon Macs. In keeping with proud Apple
tradition, the CS42L84 is essentially just a CS42L42 with a different
regmap and no publicly available datasheet. It may also be missing its
parent's S/PDIF capabilities as none of Apple's devices support S/PDIF out,
however this cannot be positively confirmed.
This driver has lived in the downstream Asahi tree for quite a while now,
and gained some refinements along the way. I have squashed most of these
into the initial driver commit as they were small changes like tweaking
msleep()s or filling out TLVs, but left seperate a larger change to
tip/ring sense IRQ handling as it differs significantly from what is found
in the CS42L42 driver.
CS42L84 is a headphone jack codec made by Cirrus Logic and seen in Apple
computer models starting with 2021 Macbook Pros. It is not a publicly
documented part. To a degree the part is similar to the public CS42L42.
(The L84 superseded L83 seen in earlier Apple models, and the L83 was
pretty much the same as L42.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241020-cs42l84-v2-1-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The H616 has an audio codec compatible with the sun4i-a10 driver.
The codec is relatively cut down compared to some of the other Allwinner
SoCs and only has a single line-out route (relying on a separate digital
microphone IP block for input). HDMI and SPDIF audio are handled
separately by an audio hub IP block, which is not currently implemented
in mainline kernels. This requires some additional flexibility in the
DMA bindings.
Add compatible string and routing for the H616 audio codec, and update
the required DMA descriptions.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241023075917.186835-3-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document compatibles for Qualcomm SM8750 SoC macro digital codecs (RX,
TX, VA and WSA), compatible with previous generation (SM8550 and
SM8650).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241022064155.22800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ES8328/ES8388 audio codec is currently used in conjunction with
audio-graph-card to provide an endpoint for binding with the other side
of the audio link.
This is achieved via the 'port' property, which is not supported by the
binding:
rk3588s-indiedroid-nova.dtb: audio-codec@11: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
Document the missing property.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241019-es8328-doc-port-v1-1-25c1d1b5c65c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DT bindings documentation for the Everest-semi ES8323 codec.
Everest-semi ES8323 codec is a low-power mono audio codec with I2S
audio interface and I2C control.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/414f829342a7b0f9d02a291eb9fd355cbef50005.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the binding to yaml.
The codec seems to be from Innosilicon, but the compatible has ever only
been rockchip-based, as they sythesized the codec for the rk3036.
So the yaml file gets a name matching that compatible.
The only other notable change is the addition of the #sound-dai-cells
property, that is always required.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241007205639.2477635-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are
supposedly valid (see link below), which is not the case today as "rx"
alone is not accepted by the current binding.
Let's rework the two interrupt properties to expose all correct
possibilities.
Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052
Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>:
The "gpio" suffix for GPIO consumers was deprecated a while ago, in
favor of the "gpios" suffix. However, there are still several users of
the "hp-det-gpio" and "mic-det-gpio" properties, in DT bindings,
drivers, and DT source files.
Drivers that use gpiolib handle both the deprecated and new properties
transparently, but that is not the case when using of_property_*() calls
directly.
Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmb/sxIOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8UyQ/7Bv69vQ0mqUffm3cLczGLxopWJmVFXfYF4EHW
XWPjpupiQfzQGmD1bTVj8UPRUb3ECjHZdJlunVOgJMkHZRfm7pwjYUDaDbazu50O
i1ZL6+MAI025fIgIAyk2fsvBs9lQlPZx8kB54v4OGM2j8xXRfchSVkAHSuFT0jFG
qyD7Cy9AMWLrtk92l6L+Nn+1mIpnADOo27ePaz5SIg9JBvdDd4n0lEcUCgY1xZKL
am+cLeRRJqpsyJtBOjEhNT/87kcjpRiJG9Cm+CQ94jo+1KEvXavSTL1Hpe7P6RVJ
hKelo10ZUhBw0jYHxkzWSOV0hU91ReS6niW2VTca2JUdcC7MhXtkvvMnliZnUUtA
uBHWh03jSbz12wImdcMxkYlbNgNlia0KDJ4i6CHacdsoTeN+oTlNo278cc6uTqz9
1N2B3k2F2BZT/lg6241JK9i1x0V/7Euzt+WV7Zuxt4KNbRQcG0xWH1PgLjtU/5Ed
T3r2gSLUhfONWfoJWlBiHDTIVWdgHk+/pfAiHivL97/aXVzZ2Yfje4mYtyT124ih
AXW7fVF0OFS5z5UWMpyK3k9RIwnd0otT0lRt5UZ1lnZbGcOU8lRneA4PH6zWE91+
VbkbqUhPUDZmwe2mzieLlkSUfIIzX0B/LfY6YulxnZ45eFZyE9G2Zy3KKQM8Hzvs
eFCOBAw=
=RpGO
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
- mac802154: fix potential RCU dereference issue in mac802154_scan_worker
- eth: fec: restart PPS after link state change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=cq2I
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
Commit 2071d0968e564b4b ("Documentation: gpio: guidelines for bindings")
deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios"
suffix. Update the Audio Graph and Simple Audio Card DT bindings to
reflect this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/833d5d9560339bf39a125914225c9a0930e134cc.1727438777.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f9a ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <ravikanth.tuniki@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per
off the list discussion with Srini it was suggested to have it since in future it
may be required to add clocks, workarounds, quirks, model-specific things based on
this compatible. The same as for RB5 compatible in sm8250 snd driver.
This focuses on HDMI audio playback only hence there are no soundwire and dmic pins,
for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works)
and one of the routes is to merge such two patchsets together.
Link to prev series:
https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@linaro.org/
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add adsp-backed soundcard compatible for QRB4210 RB2 platform,
which as of now looks fully compatible with SM8250.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241002022015.867031-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Igor Prusov <ivprusov@salutedevices.com>:
This series adds support for two NeoFidelity amplifiers. For both
amplifiers vendor provides software for equalizer and filters
configuration, which generates firmware files with registers values.
Since in both cases those files have same encoding, a common helper
module is added to get firmware via request_firmware() API and set
registers values.
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c609 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device at 0xffd90000 is named SRU, both in the datasheet and SoC
DTSI. Fix the typo in the bindings to avoid the false positive report:
sound@ffd90000: reg-names:0: 'sru' is not one of ['scu', 'ssi', 'adg']
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240926113241.24060-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8QM's esai require power-domains property. Keep the same restriction
for other compatible string.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240927205618.4093591-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx: use devie name instead of genereic imx_mu_chan as interrupt name
qcom: enable sa8255p and qcs8300 ipc controllers
bcm2835: Fix timeout during suspend mode
mailbox: convert to use use of_property_match_string
mediatek: enable mt8188
spreadtrum: use devm_clk_get_enabled helpers
rockchip: fix device-id typo
-----BEGIN PGP SIGNATURE-----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=nCRH
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup of
the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART engine
that that chip seems to have. Hopefully it's in a better state now,
but hardware designers still seem to come up with more ways to make
broken UARTS 40+ years after this all should have finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUz1w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymAhwCcCw/6BX3aKGTyx7ZxeMRc/mjbSLIAoMUv6bGT
6H04ZvcSd63ZotAWeZsn
=PWB8
-----END PGP SIGNATURE-----
Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
Nothing "major" in here, except for a new 9p network gadget that has
been worked on for a long time (all of the needed acks are here.) Other
than that, it's the usual set of:
- Thunderbolt / USB4 driver updates and additions for new hardware
- dwc3 driver updates and new features added
- xhci driver updates
- typec driver updates
- USB gadget updates and api additions to make some gadgets more
configurable by userspace
- dwc2 driver updates
- usb phy driver updates
- usbip feature additions
- other minor USB driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvU0/g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykGcACfSqouxRg8FRtq+nIKHWXI9lOTnVcAoKd9PAgq
1i7yCNopPEPEW8sjz1GX
=mY+S
-----END PGP SIGNATURE-----
Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
Nothing "major" in here, except for a new 9p network gadget that has
been worked on for a long time (all of the needed acks are here)
Other than that, it's the usual set of:
- Thunderbolt / USB4 driver updates and additions for new hardware
- dwc3 driver updates and new features added
- xhci driver updates
- typec driver updates
- USB gadget updates and api additions to make some gadgets more
configurable by userspace
- dwc2 driver updates
- usb phy driver updates
- usbip feature additions
- other minor USB driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
sub: cdns3: Use predefined PCI vendor ID constant
sub: cdns2: Use predefined PCI vendor ID constant
USB: misc: yurex: fix race between read and write
USB: misc: cypress_cy7c63: check for short transfer
USB: appledisplay: close race between probe and completion handler
USB: class: CDC-ACM: fix race between get_serial and set_serial
usb: r8a66597-hcd: make read-only const arrays static
usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
usb: storage: ene_ub6250: Fix right shift warnings
usb: roles: Improve the fix for a false positive recursive locking complaint
locking/mutex: Introduce mutex_init_with_key()
locking/mutex: Define mutex_init() once
net/9p/usbg: fix CONFIG_USB_GADGET dependency
usb: xhci: fix loss of data on Cadence xHC
usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aSwK
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
Enabling dtc interrupt_provider check reveals the examples are missing
the "#interrupt-cells" property as it is a dependency of
"interrupt-controller".
Some of the indentation is off, so fix that too.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range
-----BEGIN PGP SIGNATURE-----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=sjE7
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
This reverts commit 9184b17fbc23 ("dt-bindings: input: Goodix SPI HID
Touchscreen") because it duplicates existing binding leadings to errors:
goodix,gt7986u.example.dtb:
touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed:
['goodix,gt7986u'] is too short
'goodix,gt7375p' was expected
This was reported on mailing list on 6th of September, but no reaction
happened from contributor or maintainer to fix it.
Therefore let's drop binding which breaks and duplicates existing one.
Fixes: 9184b17fbc23 ("dt-bindings: input: Goodix SPI HID Touchscreen")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+QfTtRj_JCqXzktQ49H8VUnztVuaBjvvkg3fwEHniUHw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
This converts the Spreadtrum hardware spinlock DeviceTree binding to
YAML, to allow validation of related DeviceTree source.
-----BEGIN PGP SIGNATURE-----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=DyIB
-----END PGP SIGNATURE-----
Merge tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This converts the Spreadtrum hardware spinlock DeviceTree binding to
YAML, to allow validation of related DeviceTree source"
* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
This adds remoteproc support for the Cortex M4F found in AM62x and AM64x
of the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
The i.MX remoteproc driver gains support for blocking and non-blocking
mailbox transmissions, followed by the implementation of poweroff and
reboot mechanisms, using the same. This is followed by a few bug fixes
and minor improvements.
A few cleanups and bug fixes for the TI K3 DSP and R5F drivers are
introduced.
Support for mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores is
added.
The Ingenic, TI DA8xx, TI Keystone, TI K3, ST slim drivers are
simplified using devres helpers for various allocations.
Uses of of_{find,get}_property() are replaced with of_property_present()
where possible.
-----BEGIN PGP SIGNATURE-----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=r2tz
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
* Support for using Zkr to seed KASLR.
* Support for IPI-triggered CPU backtracing.
* Support for generic CPU vulnerabilities reporting to userspace.
* A few cleanups for missing licenses.
* The size limit on the XIP kernel has been removed.
* Support for tracing userspace stacks.
* Support for the Svvptc extension.
* Various cleanups and fixes throughout the tree.
-----BEGIN PGP SIGNATURE-----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=zDwL
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much
more excited about the support for loading DT overlays from KUnit tests so that
we can test how the clk framework parses DT nodes during clk registration. The
clk framework has some places that are highly DeviceTree dependent so this
charts the path to extend the KUnit tests to cover even more framework code in
the future. I've got some more tests on the list that use the DT overlay
support, but they uncovered issues with clk unregistration that I'm still
working on fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm and
Renesas SoCs, making it fairly usual. Looking closer, there are fixes for
things all over the place, like adding missing clk frequencies or moving
defines for the number of clks out of DT binding headers into the drivers.
There are even conversions of DT bindings to YAML and migration away from
strings to describe clk topology. Overall it doesn't look unusual so I expect
the new drivers to be where we'll have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them
turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and
add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks
on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating more
memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to
i.MX7D lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the
i.MXRT1050 driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema
-----BEGIN PGP SIGNATURE-----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=XmiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmbxGRsACgkQFA3kzBSg
KbY2IhAApRRZHNmxxcMRmxbDnbNweJdRGbtADEdkLMDui8oeK9SJHgScD0bR308p
pkHEvyOg7UiW0N4wkaDK0YpORIrGSHys2DqIC05/OLPLONz2Ry/qKuNkisZBxo6l
oP9uVKDMuCHgZq7xsxqupmpefMJ0m8XBGoMKPLbyBMu7ga4vB8o4uEQZfQLKs3YP
mFm4plZvECCVPgJ5/bp43cFFmhfPLTd088k9/XzFwB730uXPO6VsBuaYzQ7tMOR3
NQCmh/8sFJmVlJvkTnQ5QRNTo2zn+hNmjV1avFJwo5lqz35TmfpVR/+TjYPwi9v6
7H5KjHrIxQHmeaLwm94wOuJSriFzQ3DUQkxvH7vRxXDef+6nTRdD6xC+zxePKLXo
R4dYslP+5yXvtPYHonJUTXXZkfug58iO7W6Isc/5ody1y4FD22daTG5HXuWRlaAP
7O0kiyQmrwy5IZCqpwVPBJ7f+dpZzpCVP0OyXeHVXyK61rZT4zG9FvEiLQYjmYOn
MOSbddFm5yQRu+OB8GVmYKlVlCG0S+Y11fFMCO/yJZQJqLXZm2AbonwB8sz0OqZu
4zDgXg+z3Xy/Go6/FFfjltoWq/9dYzzFzUi0oB6rm0U/pFawtCtAYhfCodzJDZI4
QvzALJuFWwQZjGNmqDVfYABcX8wFxE8zAteQy+htu0Fn7qSV7GU=
=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...