Add a specific MFD_SY7636A config option.
As part of this change we can use MFD_SY7636A as a dependency for all
SY7636a components and also remove the name from MFD_SIMPLE_MFD_I2C as
it no longer needs to be selectable.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220525115554.430971-2-alistair@alistair23.me
Testing .enable cannot tell if a regulator is enabled or not, check return
value of .is_enabled() instead.
Also remove unneeded ret variable.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220919122353.384171-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDM630 and SDM660 both use RPM (not RPMh) for managing the PM660 and
PM660L. The SDM670 uses RPMh to manage them as PMIC 4s. To support the
SDM670, add the PM660 and PM660L to the RPMh regulator driver.
Link: 58064f13c0%5E%21/#F0
Link: f676d3d24f%5E%21/#F3
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920223331.150635-3-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.
This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.
Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.
Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.
The .bypass_val_on setting does not match the .bypass_mask setting, so the
.bypass_mask bit will never get set. Fix it by removing .bypass_val_on
setting, the regulator_set_bypass_regmap and regulator_get_bypass_regmap
helpers will use rdev->desc->bypass_mask as val_on if the val_on is 0.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220828120153.1512508-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.
See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:
pm8058-regulators {
(...)
vdd_l13_l16-supply = <&pm8058_s4>;
(...)
Ooops.
Fix this by moving the PM8058 S-regulators first in the array.
Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.
Fixes: 087a1b5cdd ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By using a ratio of delay to poll_enabled_time that is not integer
time_remaining underflows and does not exit the loop as expected.
As delay could be derived from DT and poll_enabled_time is defined
in the driver this can easily happen.
Use a signed iterator to make sure that the loop exits once
the remaining time is negative.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20220909125954.577669-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One core fix here improving the error handling on enable failure, plus
smaller fixes for the pfuze100 drive and the SPMI DT bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmMZ3IUACgkQJNaLcl1U
h9CwbQf6AzcfEH0QTrQrkJV5m0lWfpxSdmxWg2NSmKDsCUTEg4KKV86+iGbOax1y
StciVjWKBQ7nTwX7d2tWYL67ogziN4ePFdroKzIHMkj50+qWfy1KsopsWgm6joYj
YCfWro3f2LHD7CC70qsd1yoVV4mO+yzdwkc0qtxQe4l9rvsdfA8VH80MjGyWaxUO
dz8BjLAk3ivCsCTCGFkL3k51HLm7ORbX8ruCqFnW3a6neblliIP/z+MkNhLgZC7q
+P3GGbBYYs1d9Ay5IIM04FszhJEOfG7RSeqMosi6gCl2r8Vw3UNJ7rUyH/cGTwyV
eZFTgd89kiVg1I97FxbI4Wb1SjPg0A==
=97j3
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One core fix here improving the error handling on enable failure, plus
smaller fixes for the pfuze100 drive and the SPMI DT bindings"
* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix qcom,spmi-regulator schema
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
regulator: core: Clean up on enable failure
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
While at it switch the rest of the calls to read properties in
bd957x_probe() to the generic device property API as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-9-b29adfb27a6c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-8-b29adfb27a6c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In "regulator: core: Resolve supply name earlier to prevent
double-init", we introduced a bug that prevented the regulator names
from registering properly with sysfs.
Reorder regulator_register such that supply names are properly resolved
and registered.
Fixes: 8a866d527a ("regulator: core: Resolve supply name earlier to prevent double-init")
Link: https://lore.kernel.org/all/58b92e75-f373-dae7-7031-8abd465bb874@samsung.com/
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220829165543.24856-1-christian@kohlschutter.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Apparently the device trees of some boards have the property
"regulator-allow-set-load" for some of their regulators but then they
don't specify anything for "regulator-allowed-modes". That's not
really legit, but...
...before commit efb0cb50c4 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") they used to get away with it, at
least on boards using RPMH regulators. That's because when a regulator
driver implements set_load() then the core doesn't look at
"regulator-allowed-modes" when trying to automatically adjust things
in response to the regulator's load. The core doesn't know what mode
we'll end up in, so how could it validate it?
Said another way: before commit efb0cb50c4 ("regulator: qcom-rpmh:
Implement get_optimum_mode(), not set_load()") some boards _were_
having the regulator mode adjusted despite listing no allowed
modes. After commit efb0cb50c4 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") these same boards were now
getting an error returned when trying to use their regulators, since
simply enabling a regulator tries to update its load and that was
failing.
We don't really want to go back to the behavior from before commit
efb0cb50c4 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not
set_load()"). Boards shouldn't have been changing modes if no allowed
modes were listed. However, the behavior after commit efb0cb50c4
("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()")
isn't the best because now boards can't even turn their regulators on.
Let's choose to detect this case and return "no error" from
drms_uA_update(). The net-result will be _different_ behavior than we
had before commit efb0cb50c4 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()"), but this new behavior seems more
correct. If a board truly needed the mode switched then its device
tree should be updated to list the allowed modes.
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: efb0cb50c4 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
The get_optimum_mode() for regulator drivers is passed the input
voltage and output voltage as well as the current. This is because, in
theory, the optimum mode can depend on all three things.
It turns out that for all regulator drivers in mainline only the
current is looked at when implementing get_optimum_mode(). None of the
drivers take the input or output voltage into account. Despite the
fact that none of the drivers take the input or output voltage into
account, though, the regulator framework will error out before calling
into get_optimum_mode() if it doesn't know the input or output
voltage.
The above behavior turned out to be a probelm for some boards when we
landed commit efb0cb50c4 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()"). Before that change we'd have no
problems running drms_uA_update() for RPMH regulators even if a
regulator's input or output voltage was unknown. After that change
drms_uA_update() started to fail. This is because typically boards
using RPMH regulators don't model the input supplies of RPMH
regulators. Input supplies for RPMH regulators nearly always come from
the output of other RPMH regulators (or always-on regulators) and RPMH
firmware is initialized with this knowledge and handles enabling (and
adjusting the voltage of) input supplies. While we could model the
parent/child relationship of the regulators in Linux, many boards
don't bother since it adds extra overhead.
Let's change the regulator core to make things work again. Now if we
fail to get the input or output voltage we'll still call into
get_optimum_mode() and we'll just pass error codes in for input_uV
and/or output_uV parameters.
Since no existing regulator drivers even look at input_uV and
output_uV we don't need to add this error handling anywhere right
now. We'll add some comments in the core so that it's obvious that (if
regulator drivers care) it's up to them to add the checks.
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: efb0cb50c4 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220824142229.RFT.v2.1.I137e6bef4f6d517be7b081be926059321102fd3d@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
The pfuze_chip::regulator_descs is an array of size
PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators
is the pointer to the real regulators of a specific device.
The number of real regulator is supposed to be less than
the PFUZE100_MAX_REGULATOR, so we should use the size of
'regulator_num * sizeof(struct pfuze_regulator)' in memcpy().
This fixes the out of bounds access bug reported by KASAN.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when kasan is enabled as it detects an use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmMEyhwACgkQqDIjiipP
6E8+AAf/QFLCn1CzLsWCvHC+i4+CjoX/d/1ZhX24mZm17llBdSP5zGxlCVNCRAk/
xabT62WUbRsIzG0lCYAGUYXDUQf6qjs1QJ/fMZxtwoyHJA0yc3BtIlhxlnezpcA/
Dvfu0gu3NaZvf/yIl+PWrEJP6ZXmPzpiiYdtCZIReB+L1XR0tSJ49bxP+QIaN5JH
EXOmO0Y0XLG9jGshUS4xJrej9QQcTvgpbLGy/QLS43sdmmXHOkfbjvl1i4CPFeo3
14ENCsGm5wXAS1UHDRluoasgPUXTlG809aVzeh6pBcHzWn/90K8XeNA+lCbL8k23
hiXrpYX2Xhgy1vibyB7DW1bzQYOYxQ==
=wF0H
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for v6.1-rc1 from Daniel Lezcano:
"- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)"
* tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (46 commits)
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
thermal/core: Move set_trip_temp ops to the sysfs code
thermal/drivers/samsung: Switch to new of thermal API
regulator/drivers/max8976: Switch to new of thermal API
Input: sun4i-ts - switch to new of thermal API
iio/drivers/sun4i_gpadc: Switch to new of thermal API
hwmon/drivers/core: Switch to new of thermal API
hwmon: pm_bus: core: Switch to new of thermal API
ata/drivers/ahci_imx: Switch to new of thermal API
thermal/drivers/ti-soc: Switch to new of API
thermal/drivers/hisilicon: Switch to new of API
thermal/drivers/maxim: Switch to new of API
...
Return the value from regmap_write() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220824074707.221159-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Iskren Chernev <iskren.chernev@gmail.com>:
This patch series adds SPMI and SMD regulator support for the PM6125 found on
SM4250/SM6115 SoCs from QCom.
This code has been tested on:
* OnePlus Nord N100 (oneplus,billie2, SoC sm4250)
* Redmi 9T (redmi,lemon, SoC sm6115)
The main source used for this change is qpnp pm6125 support patch from caf [1]:
[1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5
v3: https://lkml.org/lkml/2022/7/31/303
v2: https://lkml.org/lkml/2022/7/26/885
v1: https://lkml.org/lkml/2021/8/28/144
Changes from v3:
- fix compilation issue reported by kernel test robot
- reorder HFSMPS/LDO+FTSMPS patches
- add new slew-rate computation for HFSMPS
- add proper pull-down support for new regs
- name new regs/vals after HFSMPS instead of FTSMPS
- address indentation/newline issues reported by Krzysztof
- improve commit messages on SPMI/RPM related patches
Changes from v2:
- split spmi new regulator support in 2 patches
- FTS and LDOs now have set_load and set_pull_down ops
- add better commit messages on spmi patches
- fix sob header order
- fix tested device info (Redmi 9T, NOT Xiaomi 9T)
- improve formatting in spmi binding docs
- sort alphabetically in smd binding docs
- sort alphabetically spmi pmics
- sort alphabetically smd pmics
Changes from v1:
- add dt-bindings
- split SPMI patch into new reg types and the new PMIC
- add correct supply mapping
Iskren Chernev (13):
dt-bindings: regulator: qcom_spmi: Improve formatting of if-then
blocks
dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC
dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically
dt-bindings: regulator: qcom_smd: Document PM6125 PMIC
regulator: qcom_spmi: Add support for HFSMPS regulator type
regulator: qcom_spmi: Add support for LDO_510 and FTSMPS
regulator: qcom_spmi: Sort pmics alphabetically (part 1)
regulator: qcom_spmi: Sort pmics alphabetically (part 2)
regulator: qcom_spmi: Add PM6125 PMIC support
regulator: qcom_smd: Sort pmics alphabetically (part 1)
regulator: qcom_smd: Sort pmics alphabetically (part 2)
regulator: qcom_smd: Sort pmics alphabetically (part 3)
regulator: qcom_smd: Add PM6125 RPM regulators
.../regulator/qcom,smd-rpm-regulator.yaml | 26 +-
.../regulator/qcom,spmi-regulator.yaml | 32 ++
drivers/regulator/qcom_smd-regulator.c | 400 ++++++++++--------
drivers/regulator/qcom_spmi-regulator.c | 378 ++++++++++++-----
4 files changed, 551 insertions(+), 285 deletions(-)
--
2.37.1
The regulators set consists of 3 bucks DCDCs and 4 LDOs. The output
voltages are configurable and are meant to supply power to the
main processor and other components.
Validation:
Visual check: cat /sys/kernel/debug/regulator/regulator_summary
Validation: userspace-consumer and virtual-regulator required
to test further
Enable/Disable:
cat /sys/devices/platform/userspace-consumer-VDDSHV_SD_IO_PMIC/state
echo disabled > /sys/devices/platform/
userspace-consumer-VDDSHV_SD_IO_PMIC/state
echo enabled > /sys/devices/platform/
userspace-consumer-VDDSHV_SD_IO_PMIC/state
Change voltage:
cat /sys/devices/platform/regulator-virtual-ldo1/min_microvolts
echo 1000000 > /sys/devices/platform/regulator-virtual-ldo1/
min_microvolts
echo 3000000 > /sys/devices/platform/regulator-virtual-ldo1/
max_microvolts
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220805121852.21254-9-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for PM6125 PMIC which is found on SM4250/6115 SoCs.
S1, S2, S3, S4, S8 are FTS+FTSMPS_510, rev 2
- range is 0.3-1.372V by 4mV increments
S5, S6, s7 are BUCK+HFSMPS_510, rev 4
- range is 0.32-2.04V by 8mV increment
L1, L3, L7 are LDO+N600_510, rev 2
L2, L4, L8, L17, L18 are LDO+N300_510, rev 2
L6 is LDO+N1200_510, rev 2
- range is 0.32-1.304V by 8mV increment
L5 is LDO+MV_P50_510, rev 2
L15, L19, L20 are LDO+MV_P150_510, rev 2
L21, L22, L23, L24 are LDO+MV_P600_510, rev 2
- range is 1.504-3.544V by 8mV increment
L9, L11, L14 are LDO+LV_P600_510, rev 2
L10, L16 are LDO+LV_P150_510, rev 2
L12, L13 are LDO+LV_P300_510, rev 2
- range 1.504-2V by 8mV increment
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220802221112.2280686-10-iskren.chernev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is preparation for supporing PM6125.
The HFSMPS is a BUCK type regulator with subtype 0x0a, same as the
existing HFS430 regulator.
Even though the HFSMPS and HFS430 share a type and subtype, the HFSMPS has
an updated register map, including different mode values, moved pull down
register, and different slew rate address and formula.
In addition to NORMAL (NPM), FAST (AUTO_LPM) and IDLE (LPM), the
regulator also supports RETENTION and AUTO_RM which are currently
unselectable by the driver.
The inspiration of this is taken from [1].
[1] https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20220802221112.2280686-6-iskren.chernev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If regulator_enable() fails, enable_count is incremented still.
A consumer, assuming no matching regulator_disable() is necessary on
failure, will then get this error message upon regulator_put()
since enable_count is non-zero:
[ 1.277418] WARNING: CPU: 3 PID: 1 at drivers/regulator/core.c:2304 _regulator_put.part.0+0x168/0x170
The consumer could try to fix this in their driver by cleaning up on
error from regulator_enable() (i.e. call regulator_disable()), but that
results in the following since regulator_enable() failed and didn't
increment user_count:
[ 1.258112] unbalanced disables for vreg_l17c
[ 1.262606] WARNING: CPU: 4 PID: 1 at drivers/regulator/core.c:2899 _regulator_disable+0xd4/0x190
Fix this by decrementing enable_count upon failure to enable.
With this in place, just the reason for failure to enable is printed
as expected and developers can focus on the root cause of their issue
instead of thinking their usage of the regulator consumer api is
incorrect. For example, in my case:
[ 1.240426] vreg_l17c: invalid input voltage found
Fixes: 5451781dad ("regulator: core: Only count load for enabled consumers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20220819194336.382740-1-ahalaney@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, an unresolved regulator supply reference upon calling
regulator_register on an always-on or boot-on regulator caused
set_machine_constraints to be called twice.
This in turn may initialize the regulator twice, leading to voltage
glitches that are timing-dependent. A simple, unrelated configuration
change may be enough to hide this problem, only to be surfaced by
chance.
One such example is the SD-Card voltage regulator in a NanoPI R4S that
would not initialize reliably unless the registration flow was just
complex enough to allow the regulator to properly reset between calls.
Fix this by re-arranging regulator_register, trying resolve the
regulator's supply early enough that set_machine_constraints does not
need to be called twice.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Link: https://lore.kernel.org/r/20220818124646.6005-1-christian@kohlschutter.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Matti Vaittinen <mazziesaccount@gmail.com>:
A few* drivers seem to use pattern demonstrated by pseudocode:
- devm_regulator_get()
- regulator_enable()
- devm_add_action_or_reset(regulator_disable())
Introducing devm helpers for this pattern would remove bunch of code from
drivers. Typically following:
- replace 3 calls (devm_regulator_get[_optional](), regulator_enable(),
devm_add_action_or_reset()) with just one
(devm_regulator_get_enable[_optional]()).
- drop disable callback.
- remove stored pointer to struct regulator - which can lead to problem
when an devm action for regulator_disable is used.
I believe this simplifies things by removing some dublicated code.
The suggested managed 'get_enable' APIs do not return the pointer to
regulators for user because any call to regulator_disable()
(or regulator_enable()) may easily lead to regulator enable count imbalance
upon device detach. (Eg, if someone calls regulator_disable() and the
device is then detached before user has re-enabled the regulator). Not
returning the pointer to obtained regulator to caller is a good hint that
the enable/disable should not be manually handled when these APIs are used.
OTOH, not returning the pointer reduces the use-cases by not allowing
the consumers to perform other regulator actions. For example request the
voltages. A few drivers which used the "get, enable,
devm_action_to_disable" did also query the voltages. The API does not suit
needs of such users.
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.
We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.
Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220804224349.1926752-31-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
A couple of small fixes that came in since my pull request, nothing
major here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmL7fYcACgkQJNaLcl1U
h9DAwgf/SFy3kudCyIA3KVx8FynN133eC+dUt5xNtyNWwWJaJ4NNqZXvRISMup0j
laCTWZ6pFLottgiYM4JoHwbgYvQmtC44jKFKceCVwUNY5mgJXv/bs9w1lgebFzQK
Van7I4s/rTCrYHAg1Jyp9SPi8xTJsDaTd53OB0LUW2CgrI6GJ098LAs+4nArL3fv
PbXueww1F9bcPs57OOow+zan4RZ6IB1CcrOmyl6Yuc9fU/tx4RiCznbCH3Z7mgIv
SJeNxVgaVIlvZ5mVvYPwUItz6QS1RhyJh+L6vZl/uzgrIpt33I8YHlneACz6rlHL
Ld3ISdk0IPSrhbPEtzyq3Y9O3dF8ZA==
=Ix+X
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since we don't actually pass the load to the firmware, switch to using
get_optimum_mode() instead of open-coding it.
This is intended to have no effect other than cleanup.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726102024.1.Icc838fe7bf0ef54a014ab2fee8af311654f5342a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 6eabfc018e ("regulator: core: Allow specifying an initial
load w/ the bulk API") I changed the error handling but had a subtle
that caused us to always return no error even if there was an
error. Fix it.
Fixes: 6eabfc018e ("regulator: core: Allow specifying an initial load w/ the bulk API")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220809142738.1.I91625242f137c707bb345c51c80c5ecee02eeff3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Merge series from Douglas Anderson <dianders@chromium.org>:
The main goal of this series is to make a small dent in cleaning up
the way we deal with regulator loads. The idea is to add some extra
functionality to the regulator "bulk" API so that consumers can
specify the load using that.
Drivers tend to want to define the names of their regulators somewhere
in their source file as "static const". This means, inevitable, that
every driver out there open codes something like this:
static const char * const supply_names[] = {
"vcc", "vccl",
};
static int get_regulators(struct my_data *data)
{
int i;
data->supplies = devm_kzalloc(...)
if (!data->supplies)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
data->supplies[i].supply = supply_names[i];
return devm_regulator_bulk_get(data->dev,
ARRAY_SIZE(supply_names),
data->supplies);
}
Let's make this more convenient by doing providing a helper that does
the copy.
I have chosen to have the "const" input structure here be the exact
same structure as the normal one passed to
devm_regulator_bulk_get(). This is slightly inefficent since the input
data can't possibly have anything useful for "ret" or consumer and
thus we waste 8 bytes per structure. This seems an OK tradeoff for not
introducing an extra structure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.6.I38fc508a73135a5c1b873851f3553ff2a3a625f5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a number of drivers that follow a pattern that looks like
this:
1. Use the regulator bulk API to get a bunch of regulators.
2. Set the load on each of the regulators to use whenever the
regulators are enabled.
Let's make this easier by just allowing the drivers to pass the load
in.
As part of this change we need to move the error printing in
regulator_bulk_get() around; let's switch to the new dev_err_probe()
to simplify it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.4.Ie85f68215ada39f502a96dcb8a1f3ad977e3f68a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
With the following configuration options:
CONFIG_OF is not set
CONFIG_REGULATOR_MT6380=y
we get the following build warning:
CC drivers/regulator/mt6380-regulator.o
drivers/regulator/mt6380-regulator.c:322:34: warning: ‘mt6380_of_match’ defined but not used [-Wunused-const-variable=]
Fix this by annotating that array with __maybe_unused, as done in
various regulator drivers.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202207240252.ZY5hSCNB-lkp@intel.com/
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chenglin Xu <chenglin.xu@mediatek.com>
Link: https://lore.kernel.org/r/20220727132637.76d6073f@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators marked with "regulator-always-on" or "regulator-boot-on"
as well as an "off-on-delay-us", may run into cycling issues that are
hard to detect.
This is caused by the "last_off" state not being initialized in this
case.
Fix the "last_off" initialization by setting it to the current kernel
time upon initialization, regardless of always_on/boot_on state.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Link: https://lore.kernel.org/r/FAFD5B39-E9C4-47C7-ACF1-2A04CD59758D@kohlschutter.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should call the of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount.
Fixes: 40e20d68bb ("regulator: of: Add support for parsing regulator_state for suspend state")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220715111027.391032-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s.
It features 5 HF-SMPS and 13 LDO regulators.
HF-SMPS regulators are Buck HFS430 regulators.
L1, L2 and L3 are HT_N1200_ST subtype LDO regulators.
L4 is HT_N300_ST subtype LDO regulator.
L5 and L6 are HT_P600 subtype LDO regulators.
L7, L11, L12 and L13 are HT_P150 subtype LDO regulators.
L10 is HT_P50 subtype LDO regulator.
This commit adds support for all of the buck regulators and LDO-s except
for L10 as I dont have documentation on its output voltage range.
S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores
and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.
Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.
Their usual voltage that they are used is 1.8V.
It has a max current of 600mA, voltage step of 8mV.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.
Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.
It has a max current of 150mA, voltage step of 8mV.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch makes sense but these are not compile warnings.
They come from scripts/checkversion.pl, which can be called
by 'make versioncheck', so I suppose that something in your
build system is running 'make versioncheck'.
Eliminate the follow versioncheck warning:
./drivers/regulator/max597x-regulator.c: 21 linux/version.h not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220711034011.46096-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers should depend on rather than select their MFDs.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220707111753.16581-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use Complete data type declaration of 'sel' in ti_abb_set_voltage_sel().
Fix spelling of 'are'nt' in comments.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Link: https://lore.kernel.org/r/20220705071445.21124-1-jiaming@nfschina.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max597x is hot swap controller.
This regulator driver controls the same & also configures fault
protection features supported by the chip.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20220705122244.472894-4-Naresh.Solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephan Gerhold <stephan.gerhold@kernkonzept.com>:
Fix the voltage range for the pm8916_pldo in the qcom_smd-regulator
driver and add definitions for the regulators available in PM8909.
In scmi_regulator_probe(), of_find_node_by_name() will decrease
the refcount of its first argument and we need a of_node_get()
to keep reference balance.
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220622034816.4094043-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The set of regulators available in the PM8909 PMIC is similar to PM8916
which is already supported by the driver. s3, s4 and l16 are missing.
However, probing the SPMI hardware identification registers using the
qcom_spmi-regulator driver reveals that the regulators in PM8909 are
actually some kind of mixture between PM8916 and PM8226:
- ult_lo_smps (= pm8916_buck_lvo_smps): s1
- ult_ho_smps (= pm8916_buck_hvo_smps): s2
- ult_nldo (= pm8916_nldo): l1, l2, l3, l10
- ult_pldo (= pm8916_pldo): l4, l8, l9, l12-l15, l17, l18
- pldo (= pm8226_pldo): l5, l6, l7, l11
Use this mapping to add the rpm_regulator_data for PM8909 by reusing
the existing regulator definitions.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-4-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8916 device specification [1] documents a programmable range of
1.75V to 3.337V with 12.5mV steps for the PMOS LDOs in PM8916. This
range is also used when controlling the regulator directly using the
qcom_spmi-regulator driver ("ult_pldo" there).
However, for some reason the qcom_smd-regulator driver allows a much
larger range for the same hardware component. This could be simply a
typo, since the start of the range is essentially just missing a '1'.
In practice this does not cause any major problems, since the driver
just sends the actual voltage to the RPM firmware instead of making use
of the incorrect voltage selector. Still, having the wrong range there
is confusing and prevents the regulator core from validating requests
correctly.
[1]: https://developer.qualcomm.com/download/sd410/pm8916pm8916-1-power-management-ic-device-specification.pdf
Fixes: 57d6567680 ("regulator: qcom-smd: Add PM8916 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'platform_device_id' struct is defined in 'mod_devicetable.h'.
Even 'of.h' also includes this header usage. The 'of.h' cannot be removed
due to 'of_match_ptr' function.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1656466861-7737-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From the common binding, 'enable-gpio' or 'enable-gpios' are all well
for external 'enable' gpio.
'gpiod_get_from_of_node' only parse the 'enable' property, it need to
add the gpio suffix. It's more convenient to use fwnode_gpiod_get_index.
Although fwnode parsing is not preferred, but 'of_parse_cb' already can
guarantee the callback will only be used by regulator of_node parsing.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1656466861-7737-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add RT5120 PMIC regulator support.
It integrates 4 buck convertes, 1 LDO voltage regulator, 1 external
enable signal to control the external power source.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1655892104-10874-4-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220607185304.1128962-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether expressed or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license version 2 for
more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
you should have received a copy of the gnu general public license
along with this program if not write to the free software foundation
inc 59 temple place suite 330 boston ma 02111-1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cros_ec_command() is the name of a function as well as a struct, as such
it can confuse indexing tools (like ctags). Avoid this by renaming it to
cros_ec_cmd(). Update all the callsites to use the new name.
This patch is a find-and-replace, so should not introduce any functional
changes.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220606201825.763788-3-pmalani@chromium.org
Reduce code duplication by using the common cros_ec_command() function
instead of the locally defined variant.
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220606201825.763788-2-pmalani@chromium.org
If the node for the match name cannot be found, 'of_regulator_match' will
returns init_data as NULL for this regulator.
Add the check for the init_data. If it's NULL, make 'rt5190a_of_parse_cb'
function directly return.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1654148646-12182-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MP5496 is the updated version of MP5416 with the only difference being
that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV
step.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20220604145816.47576-4-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for adding support for MP5496 which slightly differs from
MP5416 convert the driver to use OF match data instead of always using the
MP5416 regulator_desc for regulator registration.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20220604145816.47576-3-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_register_sys_off_handler() that replaces global
pm_power_off_prepare variable and allows to register multiple
power-off handlers.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516074433.32433-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_node_get() returns a node with refcount incremented.
Calling of_node_put() to drop the reference when not needed anymore.
Fixes: 3784b6d64d ("regulator: pfuze100: add pfuze100 regulator driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511113506.45185-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following changes have been made:
- S5, L4, L18, L20 and L21 were removed (S5 is managed by
SPMI, whereas the rest seems not to exist [or at least it's blocked
by Sony Loire /MSM8956/ RPM firmware])
- Supply maps have were adjusted to reflect regulator changes.
Fixes: e44adca5fa ("regulator: qcom_smd: Add PM8950 regulators")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220430163753.609909-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the introduction of regulator->enable_count, a driver that did
an exclusive get on an already-enabled regulator would end up with
enable_count initialized to 0 but rdev->use_count initialized to 1.
With that starting point the regulator is effectively stuck enabled,
because if the driver attempted to disable it it would fail the
enable_count underflow check in _regulator_handle_consumer_disable().
The EXCLUSIVE_GET path in _regulator_get() now initializes
enable_count along with rdev->use_count so that the regulator can be
disabled without underflowing the former.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 5451781dad ("regulator: core: Only count load for enabled consumers")
Link: https://lore.kernel.org/r/20220505043152.12933-1-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
If a regulator provides a get_error_flags() operation, its sysfs
attributes will now include an entry for each defined
REGULATOR_ERROR_* flag.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220504065252.6955-3-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When DVS is enabled via the devicetree properties
"nxp,dvs-run-voltage" and "nxp,dvs-standby-voltage" then
also the bit that enables DVS control via PMIC_STBY_REQ pin
should be set.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-5-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-4-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the I2C Level Translator included in PCA9450 configurable from
devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the
I2C Level Translator will be enabled while in STANDBY or RUN state.
Signed-off-by: Per-Daniel Olsson <perdo@axis.com>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-2-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having one enable-gpios property for all regulators is discouraged and
instead, similarly to regulator core ena_gpiod feature, each GPIO should
be present in each regulator node. Add support for parsing such GPIOs,
keeping backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20220425072455.27356-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
These delays can be relatively large (e.g., hundreds of microseconds to
several milliseconds on RK3399 Gru systems). Per
Documentation/timers/timers-howto.rst, that should usually use a
sleeping delay. Let's use the existing regulator delay helper to handle
both large and small delays appropriately. This avoids burning a bunch
of CPU time and hurting scheduling latencies when hitting regulators a
lot (e.g., during cpufreq).
The sleep vs. delay issue choice has been made differently over time --
early versions of RK3399 Gru PWM-regulator support used usleep_range()
in pwm-regulator.c. More of this got moved into the regulator core,
in commits like:
73e705bf81 regulator: core: Add set_voltage_time op
At the same time, the sleep turned into a delay.
It's OK to sleep in _regulator_do_set_voltage(), as we aren't in an
atomic context. (All our callers grab various mutexes already.)
I avoid using fsleep() because it uses a usleep_range() of [N to N*2],
and usleep_range() very commonly biases to the high end of the range. We
don't want to double the expected delay, especially for long delays.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220420141511.v2.2.If0fc61a894f537b052ca41572aff098cf8e7e673@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/report.c:491
__regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
__devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
__devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.
Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid.
Fixes: f3fbd5566f ("regulator: da9121: Add device variants")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Adam Ward <Adam.Ward.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220421090335.1876149-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220412071030.2532230-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
