net.ipv4.nexthop_compat_mode was added when nexthop objects were added to
provide the view of nexthop objects through the usual lens of the route
UAPI. As nexthop objects evolved, the information provided through this
lens became incomplete. For example, details of resilient nexthop groups
are obviously omitted.
Now that 16-bit nexthop group weights are a thing, the 8-bit UAPI cannot
convey the >8-bit weight accurately. Instead of inventing workarounds for
an obsolete interface, just document the expectations of inaccuracy.
Fixes: b72a6a7ab957 ("net: nexthop: Increase weight to u16")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/b575e32399ccacd09079b2a218255164535123bd.1733740749.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of
the previous generation (5750X or P5). However, the aggregation ID
fields in the completion structures on P7 have been redefined from
16 bits to 12 bits. The freed up 4 bits are redefined for part of the
metadata such as the VLAN ID. The aggregation ID mask was not modified
when adding support for P7 chips. Including the extra 4 bits for the
aggregation ID can potentially cause the driver to store or fetch the
packet header of GRO/LRO packets in the wrong TPA buffer. It may hit
the BUG() condition in __skb_pull() because the SKB contains no valid
packet header:
kernel BUG at include/linux/skbuff.h:2766!
Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022
RIP: 0010:eth_type_trans+0xda/0x140
Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48
RSP: 0018:ff615003803fcc28 EFLAGS: 00010283
RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040
RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000
RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001
R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0
R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000
FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x33/0x90
? do_trap+0xd9/0x100
? eth_type_trans+0xda/0x140
? do_error_trap+0x65/0x80
? eth_type_trans+0xda/0x140
? exc_invalid_op+0x4e/0x70
? eth_type_trans+0xda/0x140
? asm_exc_invalid_op+0x16/0x20
? eth_type_trans+0xda/0x140
bnxt_tpa_end+0x10b/0x6b0 [bnxt_en]
? bnxt_tpa_start+0x195/0x320 [bnxt_en]
bnxt_rx_pkt+0x902/0xd90 [bnxt_en]
? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en]
? kmem_cache_free+0x343/0x440
? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en]
__bnxt_poll_work+0x193/0x370 [bnxt_en]
bnxt_poll_p5+0x9a/0x300 [bnxt_en]
? try_to_wake_up+0x209/0x670
__napi_poll+0x29/0x1b0
Fix it by redefining the aggregation ID mask for P5_PLUS chips to be
12 bits. This will work because the maximum aggregation ID is less
than 4096 on all P5_PLUS chips.
Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert the attempt to make CLK_GET_RATE_NOCACHE flag work in
clk_set_rate() because it led to problems with the Qualcomm CPUFreq
driver
- Revert Amlogic reset driver back to the initial implementation. This
broke probe of the audio subsystem on axg based platforms and also
had compilation problems. We'll try again next time.
- Fix a clk frequency and fix array bounds runtime checks in the Airoha
EN7581 driver
-----BEGIN PGP SIGNATURE-----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=8Mf1
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two reverts and two EN7581 driver fixes:
- Revert the attempt to make CLK_GET_RATE_NOCACHE flag work in
clk_set_rate() because it led to problems with the Qualcomm CPUFreq
driver
- Revert Amlogic reset driver back to the initial implementation.
This broke probe of the audio subsystem on axg based platforms and
also had compilation problems. We'll try again next time.
- Fix a clk frequency and fix array bounds runtime checks in the
Airoha EN7581 driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: en7523: Initialize num before accessing hws in en7523_register_clocks()
clk: en7523: Fix wrong BUS clock for EN7581
clk: amlogic: axg-audio: revert reset implementation
Revert "clk: Fix invalid execution of clk_set_rate"
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmdYzmoACgkQxWXV+ddt
WDv5GxAAnCsGctNax89x/VpCDZynRghrkxlzu/4kG/pqxsJyzlgXDFtzHAEewSMs
MYL+WCZLYpeKB5FpZq98mDJVLGNMG+9wqkx1bH/xy2ajBGZTeQe5pnkXMNlv9U1O
SX34t8nzOdTCENDnQeRc5I2vTcsQRhgHoVjJkAYdWdhcD9fs6xHKZRe+himlstSn
46ioKzEKSR3ztEUW4ycPF379g7d4kTR0hkk3pu5Nxe7ER8iq+jNSWXj0mzKg7mpJ
KxP56VgY0OrsiUcJr2qFZ1hQIp810puaAuM4C1lLgRplECHxtLbP9JvL9Rr7a8Ox
68tuThyLEpQtR59078jIX3RK6CwVi15rKb/ZkLZkW19TNSAAfM5qrB146hLBUM4T
16WaiJ0x9lVkH2oYQv8zbNZiqDxPhPUdS/JArNAcQYk9ma+C1hCsxPQ/N5yoWH/C
OABJddNR83sm4VTXu3Nci1EB8QuEoOuihYO6CdRkJ3PPNDuQiG6gwnoA2zqSihhy
L5fQaLSWAUsLczarHZrvAi9Y0rfG66QzqGR+A1K/8qMTQ8pSCupd+LfqVa21QpI1
Awx/wVFzsAm7z9CrnPTRJe+JSlBDQdeXWX7pDhhkXgwbCsMVSf3dbBweCD3o1EiM
BVI7SfEgImlbatd0QvDp9FcsnEqp90SCi+99U+zZCmQ1SW8CEC0=
=+DUB
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes. Apart from the one liners and updated bio splitting
error handling there's a fix for subvolume mount with different flags.
This was known and fixed for some time but I've delayed it to give it
more testing.
- fix unbalanced locking when swapfile activation fails when the
subvolume gets deleted in the meantime
- add btrfs error handling after bio_split() calls that got error
handling recently
- during unmount, flush delalloc workers at the right time before the
cleaner thread is shut down
- fix regression in buffered write folio conversion, explicitly wait
for writeback as FGP_STABLE flag is currently a no-op on btrfs
- handle race in subvolume mount with different flags, the conversion
to the new mount API did not handle the case where multiple
subvolumes get mounted in parallel, which is a distro use case"
* tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
btrfs: handle bio_split() errors
btrfs: properly wait for writeback before buffered write
btrfs: fix missing snapshot drew unlock when root is dead during swap activation
btrfs: fix mount failure due to remount races
- eprobes: Fix to release eprobe when failed to add dyn_event.
This unregisters event call and release eprobe when it fails to add
a dynamic event. Found in cleaning up.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmdYT3sbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b5X8IALRigb6oDLzrq8yavSPy
xn1QlnRtRFdLz+PQ3kFCzU3TOT9oxdFhBkYAXS32vDItPqzM7Upj0oZceqhmd5kz
aXSdkL+PFmbHuLzyPuBksyX4gKga06rQBHJ2SIPxnRPZcXBBRStqyWRDpNjwIxrW
K8p6k0Agrtd4tL7QtBdukda0uJqKSjN3gOzRAu40KMBjBJZ3kMTsoc+GWGIoIMHb
PIDaXTZT0DlZ9ZxiEA/gPcjMugNjDVhkbq2ChPU+asvlRs0YUANT4CF0HcntJvDO
W0xIWivfYIKWFLdAn6fhXicPkqU9DQ7FjppyRKC6y4bwuCYJlSeLsPmSWNI2IEBX
bFA=
=LLWX
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull eprobes fix from Masami Hiramatsu:
- release eprobe when failing to add dyn_event.
This unregisters event call and release eprobe when it fails to add a
dynamic event. Found in cleaning up.
* tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix to release eprobe when failed to add dyn_event
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25737
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some file systems do not ensure that the single call of iterate_dir
reaches the end of the directory. For example, FUSE fetches entries from
a daemon using 4KB buffer and stops fetching if entries exceed the
buffer. And then an actor of caller, KSMBD, is used to fill the entries
from the buffer.
Thus, pattern searching on FUSE, files located after the 4KB could not
be found and STATUS_NO_SUCH_FILE was returned.
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Yoonho Shin <yoonho.shin@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
After the blamed commit below, udp_rehash() is supposed to be called
with both local and remote addresses set.
Currently that is already the case for IPv6 sockets, but for IPv4 the
destination address is updated after rehashing.
Address the issue moving the destination address and port initialization
before rehashing.
Fixes: 1b29a730ef8b ("ipv6/udp: Add 4-tuple hash for connected socket")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the current implementation, when ACP driver fails to read
ACPI _WOV entry then the DMI overrides code won't invoke,
may cause regressions for some BIOS versions.
Add a condition check to jump to check the DMI entries incase of
ACP driver fail to read ACPI _WOV method.
Fixes: 4095cf872084 (ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry)
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241210091026.996860-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align all line continuations and (sub)section headers in a consistent
way.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.
Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.
The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.
This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)
Fixes: 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/5e032233-5b65-4ad5-ac50-d2eb6c00171c@roeck-us.net/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rong Xu <xur@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Using WARN() for showing the error of symlink creations don't give
more information than telling that something goes wrong, since the
usual code path is a lregister callback from each control element
creation. More badly, the use of WARN() rather confuses fuzzer as if
it were serious issues.
This patch downgrades the warning messages to use the normal dev_err()
instead of WARN(). For making it clearer, add the function name to
the prefix, too.
Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: syzbot+4e7919b09c67ffd198ae@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/675664c7.050a0220.a30f1.018c.GAE@google.com
Link: https://patch.msgid.link/20241209095614.4273-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DEFAULT_SYMBOL_NAMESPACE must already be defined when <linux/export.h>
is included. So move the define above the include block.
Fixes: b9b1fc1ae119 ("gpio: idio-16: Introduce the ACCES IDIO-16 GPIO library module")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Link: https://lore.kernel.org/r/20241203172631.1647792-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so
DQL counters need to be reset when flushing has actually occurred, Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize()
to handle this.
Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to
be reset when flushing has actually occurred. Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to
handle this.
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While not harmful, using vq2rxq where it's always sq appears odd.
Replace it with the more appropriate vq2txq for clarity and correctness.
Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x70
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
[ pabeni: trimmed possibly troublesome separator ]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Interrupt status (GPI_IS) register is cleared by writing 1 to it, not 0.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-8-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO line can only be used as interrupt if its INTSEL register is
programmed by the BIOS.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-7-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add check of HOSTSW_MODE bit to determine if GPIO pad can be used by the
driver.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-6-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Base Address of vGPIO MMIO register is provided directly by the BIOS
instead of using offsets. Update address assignment to reflect this
change in driver.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-3-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Move setting irq_chip.name from probe() function to the initialization
of "irq_chip" struct in order to fix vGPIO driver crash during bootup.
Crash was caused by unauthorized modification of irq_chip.name field
where irq_chip struct was initialized as const.
This behavior is a consequence of suboptimal implementation of
gpio_irq_chip_set_chip(), which should be changed to avoid
casting away const qualifier.
Crash log:
BUG: unable to handle page fault for address: ffffffffc0ba81c0
/#PF: supervisor write access in kernel mode
/#PF: error_code(0x0003) - permissions violation
CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1
Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024
RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-2-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Due to target variable is being reassigned in npc_install_flow()
function, PF multicast rules are not getting installed.
This patch addresses the issue by fixing the "IF" condition
checks when rules are installed by AF.
Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Large kmalloc directly allocates from the page allocator and then use
lruvec_stat_mod_folio() to increment the unreclaimable slab stats for
global and memcg. However when post memcg charging of slab objects was
added in commit 9028cdeb38e1 ("memcg: add charging of already allocated
slab objects"), it missed to correctly handle the unreclaimable slab
stats for memcg.
One user visisble effect of that bug is that the node level
unreclaimable slab stat will work correctly but the memcg level stat can
underflow as kernel correctly handles the free path but the charge path
missed to increment the memcg level unreclaimable slab stat. Let's fix
by correctly handle in the post charge code path.
Fixes: 9028cdeb38e1 ("memcg: add charging of already allocated slab objects")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Stefan Wahren says:
====================
qca_spi: Fix SPI specific issues
This small series address two annoying SPI specific issues of
the qca_spi driver.
====================
Link: https://patch.msgid.link/20241206184643.123399-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Storing the maximum clock speed in module parameter qcaspi_clkspeed
has the unintended side effect that the first probed instance
defines the value for all other instances. Fix this issue by storing
it in max_speed_hz of the relevant SPI device.
This fix keeps the priority of the speed parameter (module parameter,
device tree property, driver default). Btw this uses the opportunity
to get the rid of the unused member clkspeed.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The comparison function cmp_profile_data() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
When v1 and v2 are equal, the function incorrectly returns 1, breaking
symmetry and transitivity. This causes undefined behavior, which can
lead to memory corruption in certain versions of glibc [1].
Fix the issue by returning 0 when v1 and v2 are equal, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 0f223813edd0 ("perf ftrace: Add 'profile' command")
Fixes: 74ae366c37b7 ("perf ftrace profile: Add -s/--sort option")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: jserv@ccns.ncku.edu.tw
Cc: chuang@cs.nycu.edu.tw
Link: https://lore.kernel.org/r/20241209134226.1939163-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
-----BEGIN PGP SIGNATURE-----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=SGkT
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
- Add Arrow Lake U support
-----BEGIN PGP SIGNATURE-----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=X7zT
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is drained before reconfiguring the
hardware
- Add Arrow Lake U support
* tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG
perf/x86/intel: Add Arrow Lake U support
a RT mutex
- Do not setup a new deadline entity on a boosted task as that has happened
already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and avoid
unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the warning
to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity no
longer a subset of the cpuset
-----BEGIN PGP SIGNATURE-----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=XLf1
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error:
ld: vmlinux.o: in function `virtual_mapped':
linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc'
when CONFIG_KEXEC_JUMP is enabled.
This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on
return from ::preserve_context kexec") which introduced a use of
saved_context_gdt_desc without a declaration for it.
Fix that by including asm/asm-offsets.h where saved_context_gdt_desc
is defined (indirectly in include/generated/asm-offsets.h which
asm/asm-offsets.h includes).
Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Machon says:
====================
net: sparx5: misc fixes for sparx5 and lan969x
This series fixes various issues in the Sparx5 and lan969x drivers. Most
of the fixes are for new issues introduced by the recent series adding
lan969x switch support in the Sparx5 driver.
Most notable is patch 1/5 that moves the lan969x dir into the sparx5
dir, in order to address a cyclic dependency issue reported by depmod,
when installing modules. Details are in the commit descriptions.
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: UNGLinuxDriver@microchip.com
To: Richard Cochran <richardcochran@gmail.com>
To: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: jensemil.schulzostergaard@microchip.com
To: horatiu.vultur@microchip.com
To: arnd@arndb.de
To: jacob.e.keller@intel.com
To: Parthiban.Veerasooran@microchip.com
Cc: Calvin Owens <calvin@wbinvd.org>
Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
====================
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On port initialization, we configure the maximum frame length accepted
by the receive module associated with the port. This value is currently
written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in
fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix
this.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing port mirroring, the physical port to send the frame to, is
written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register.
This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has
a default value of 65 and 30, respectively (the number of front ports).
On mirror deletion, we set the default value of the monitor port to
65 for this field, in case no more ports exists for the mirror. Needless
to say, this will not fit the 6 bits on lan969x.
Fix this by correctly using the n_ports constant instead.
Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are mixing the use of spin_lock() and spin_lock_irqsave() functions
in the PTP handler of lan969x. Fix this by correctly using the _irqsave
variants.
Fixes: 24fe83541755 ("net: lan969x: add PTP handler function")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
[1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:
depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch
depmod: ERROR: Found 2 modules in dependency cycles!
make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make: *** [Makefile:224: __sub-make] Error 2
This makes sense, as they both require symbols from each other.
Fix this by compiling lan969x support into the sparx5-switch.ko module.
In order to do this, in a sensible way, we move the lan969x/ dir into
the sparx5/ dir and do some code cleanup of code that is no longer
required.
After this patch, depmod will no longer complain, as lan969x support is
compiled into the sparx5-swicth.ko module, and can no longer be compiled
as a standalone module.
Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
