The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZxIyrQAKCRALxc3C7H1l
CCgGAQDkVANkAOTEq8zOfpaULkWkMJXMRzd28YrkCqlgJfbkYQEAjTWtz8F48Ne7
V9CYj/dbNULlQ0Q+kqKqGBcKdZrq2AI=
=/sNu
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.12-rc4
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
* tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
Commit 2fae6bb7be ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
hash_check_key() checks and repairs the hash table btrees: dirents and
xattrs are open addressing hash tables.
We recently had a corruption reported where the hash type on an inode
somehow got flipped, which made the existing dirents invisible and
allowed new ones to be created with the same name.
Now, hash_check_key() can repair duplicates: it will delete one of them,
if it has an xattr or dangling dirent, but if it has two valid dirents
one of them gets renamed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Different versions of the same inode (same inode number, different
snapshot ID) must have the same hash seed and type - lookups require
this, since they see keys from different snapshots simultaneously.
To repair we only need to make the inodes consistent, hash_check_key()
will do the rest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This helped with discovering some filesystem corruption fsck has having
trouble with: the str_hash type had gotten flipped on one snapshot's
version of an inode.
All versions of a given inode number have the same hash seed and hash
type, since lookups will be done with a single hash/seed and type and
see dirents/xattrs from multiple snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The options parse in get_tree will split the options buffer, it will
get the empty string for last one by strsep(). After commit
ea0eeb89b1d5 ("bcachefs: reject unknown mount options") is merged,
unknown mount options is not allowed (here is empty string), and this
causes this errors. This can be reproduced just by the following steps:
bcachefs format /dev/loop
mount -t bcachefs -o metadata_target=loop1 /dev/loop1 /mnt/bcachefs/
Fixes: ea0eeb89b1d5 ("bcachefs: reject unknown mount options")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When call show_options in bcachefs, the options buffer is appeneded
to the seq variable. In fact, it requires an additional comma to be
appended first. This will affect the remount process when reading
existing mount options.
Fixes: 9305cf91d05e ("bcachefs: bch2_opts_to_text()")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Found by generic/299: When we have to truncate a write due to -ENOSPC,
we may have to read in the folio we're writing to if we're now no longer
doing a complete write to a !uptodate folio.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_folio_reservation_get_partial(), on partial success, will now
return a reservation that's aligned to the filesystem blocksize.
This is a partial fix for fstests generic/299 - fio verify is badly
behaved in the presence of short writes that aren't aligned to its
blocksize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_disk_reservation_put() zeroes out the reservation - oops.
This fixes a disk reservation leak when getting a quota reservation
returned an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Using commit_do() to call alloc_sectors_start_trans() breaks when we're
randomly injecting transaction restarts - the restart in the commit
causes us to leak the lock that alloc_sectorS_start_trans() takes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_bucket_io_time_reset() doesn't need to succeed, which is why it
didn't previously retry on transaction restart - but we're now treating
these as errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is ugly:
We may discover in alloc_write_key that the data type we calculated is
wrong, because BCH_DATA_need_discard is checked/set elsewhere, and the
disk accounting counters we calculated need to be updated.
But bch2_alloc_key_to_dev_counters(..., BTREE_TRIGGER_gc) is not safe
w.r.t. transaction restarts, so we need to propagate the fixup back to
our gc state in case we take a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this one is fairly harmless since the invalidate worker will just run
again later if it needs to, but still worth fixing
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This should be impossible to hit in practice; the first lookup within a
transaction won't return a restart due to lock ordering, but we're
adding fault injection for transaction restarts and shaking out bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
as part of IBPB. Make sure that happens by doing the flushing in
software on those generations
-----BEGIN PGP SIGNATURE-----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=ovJa
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_post_ibpb' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBPB fixes from Borislav Petkov:
"This fixes the IBPB implementation of older AMDs (< gen4) that do not
flush the RSB (Return Address Stack) so you can still do some leaking
when using a "=ibpb" mitigation for Retbleed or SRSO. Fix it by doing
the flushing in software on those generations.
IBPB is not the default setting so this is not likely to affect
anybody in practice"
* tag 'x86_bugs_post_ibpb' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
x86/bugs: Skip RSB fill at VMEXIT
x86/entry: Have entry_ibpb() invalidate return predictions
x86/cpufeatures: Add a IBPB_NO_RET BUG flag
x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET
The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.
Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).
Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.
Fixes: 8270cb10c0 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is the usual shower of unrelated singletons - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZxGY5wAKCRDdBJ7gKXxA
js6RAQC16zQ7WRV091i79cEi1C5648NbZjMCU626hZjuyfbzKgEA2v8PYtjj9w2e
UGLxMY+PYZki2XNEh75Sikdkiyl9Vgg=
=xcWT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.
It is the usual shower of unrelated singletons - please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: add regression test for spanning store bug
maple_tree: correct tree corruption on spanning store
mm/mglru: only clear kswapd_failures if reclaimable
mm/swapfile: skip HugeTLB pages for unuse_vma
selftests: mm: fix the incorrect usage() info of khugepaged
MAINTAINERS: add Jann as memory mapping/VMA reviewer
mm: swap: prevent possible data-race in __try_to_reclaim_swap
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
MAINTAINERS: kasan, kcov: add bugzilla links
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
mm: remove unused stub for can_swapin_thp()
mailmap: add an entry for Andy Chiu
MAINTAINERS: add memory mapping/VMA co-maintainers
fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
...
- Terminate the of_device_id table in the Samsung exynosautov920 clk
driver so that device matching logic doesn't run off the end of the
array into other memory and break matching for any kernel with this
driver loaded
- Properly limit the max clk ID in the Rockchip clk driver
- Use clk kunit helpers in the clk tests so that memory isn't leaked
after the test concludes
-----BEGIN PGP SIGNATURE-----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=EKY/
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes and a unit test fix:
- Terminate the of_device_id table in the Samsung exynosautov920 clk
driver so that device matching logic doesn't run off the end of the
array into other memory and break matching for any kernel with this
driver loaded
- Properly limit the max clk ID in the Rockchip clk driver
- Use clk kunit helpers in the clk tests so that memory isn't leaked
after the test concludes"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: test: Fix some memory leaks
clk: rockchip: fix finding of maximum clock ID
clk: samsung: Fix out-of-bound access of of_match_node()
Add a maintainers entry now that the PREEMPT_RT bits are merged. Steven
volunteered and asked for the list.
There are no files associated with this entry since it is spread over the
kernel. It serves as entry for people knowing what they look for. There is
a keyword added so if PREEMPT_RT is mentioned somewhere, then the entry
will be picked up.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/all/20241015151132.Erx81G9f@linutronix.de
>From memfd_secret(2) manpage:
The memory areas backing the file created with memfd_secret(2) are
visible only to the processes that have access to the file descriptor.
The memory region is removed from the kernel page tables and only the
page tables of the processes holding the file descriptor map the
corresponding physical memory. (Thus, the pages in the region can't be
accessed by the kernel itself, so that, for example, pointers to the
region can't be passed to system calls.)
We need to handle this special case gracefully in build ID fetching
code. Return -EFAULT whenever secretmem file is passed to build_id_parse()
family of APIs. Original report and repro can be found in [0].
[0] https://lore.kernel.org/bpf/ZwyG8Uro%2FSyTXAni@ly-workstation/
Fixes: de3ec364c3 ("lib/buildid: add single folio-based file reader abstraction")
Reported-by: Yi Lai <yi1.lai@intel.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20241017175431.6183-A-hca@linux.ibm.com
Link: https://lore.kernel.org/bpf/20241017174713.2157873-1-andrii@kernel.org
The current policy management makes it impossible to use IPE
in a general purpose distribution. In such cases the users are not
building the kernel, the distribution is, and access to the private
key included in the trusted keyring is, for obvious reason, not
available.
This means that users have no way to enable IPE, since there will
be no built-in generic policy, and no access to the key to sign
updates validated by the trusted keyring.
Just as we do for dm-verity, kernel modules and more, allow the
secondary and platform keyrings to also validate policies. This
allows users enrolling their own keys in UEFI db or MOK to also
sign policies, and enroll them. This makes it sensible to enable
IPE in general purpose distributions, as it becomes usable by
any user wishing to do so. Keys in these keyrings can already
load kernels and kernel modules, so there is no security
downgrade.
Add a kconfig each, like dm-verity does, but default to enabled if
the dependencies are available.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
[FW: fixed some style issues]
Signed-off-by: Fan Wu <wufan@kernel.org>
In raid10_run() if raid10_set_queue_limits() succeed, the return value
is set to zero, and if following procedures failed raid10_run() will
return zero while mddev->private is still NULL, causing null ptr
dereference in raid10_size().
Fix the problem by only overwrite the return value if
raid10_set_queue_limits() failed.
Fixes: 3d8466ba68 ("md/raid10: use the atomic queue limit update APIs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: ValdikSS <iam@valdikss.org.ru>
Closes: https://lore.kernel.org/all/0dd96820-fe52-4841-bc58-dbf14d6bfcc8@valdikss.org.ru/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241009014914.1682037-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Currently IPE accepts an update that has the same version as the policy
being updated, but it doesn't make it a no-op nor it checks that the
old and new policyes are the same. So it is possible to change the
content of a policy, without changing its version. This is very
confusing from userspace when managing policies.
Instead change the update logic to reject updates that have the same
version with ESTALE, as that is much clearer and intuitive behaviour.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
When loading policies in userspace we want a recognizable error when an
update attempts to use an old policy, as that is an error that needs
to be treated differently from an invalid policy. Use -ESTALE as it is
clear enough for an update mechanism.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
When a flush is issued to an RAID array, a child flush IO is created and
issued for each member disk in the RAID array. Since commit b75197e86e
("md: Remove flush handling"), each child flush IO has been chained with
the original bio. As a result, the failure of any child IO could modify
the bi_status of the original bio, potentially impacting the upper-layer
filesystem.
Fix the issue by preventing child flush IO from altering the original
bio->bi_status as before. However, this design introduces a known
issue: in the event of a power failure, if a flush IO on a member
disk fails, the upper layers may not be informed. This issue is not easy
to fix and will not be addressed for the time being in this issue.
Fixes: b75197e86e ("md: Remove flush handling")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240919063048.2887579-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
print_reg_state() should not consider adding reg->off to reg->var_off.value
when dumping scalars. Scalars can be produced with reg->off != 0 through
BPF_ADD_CONST, and thus as-is this can skew the register log dump.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016134913.32249-2-daniel@iogearbox.net
Nathaniel reported a bug in the linked scalar delta tracking, which can lead
to accepting a program with OOB access. The specific code is related to the
sync_linked_regs() function and the BPF_ADD_CONST flag, which signifies a
constant offset between two scalar registers tracked by the same register id.
The verifier attempts to track "similar" scalars in order to propagate bounds
information learned about one scalar to others. For instance, if r1 and r2
are known to contain the same value, then upon encountering 'if (r1 != 0x1234)
goto xyz', not only does it know that r1 is equal to 0x1234 on the path where
that conditional jump is not taken, it also knows that r2 is.
Additionally, with env->bpf_capable set, the verifier will track scalars
which should be a constant delta apart (if r1 is known to be one greater than
r2, then if r1 is known to be equal to 0x1234, r2 must be equal to 0x1233.)
The code path for the latter in adjust_reg_min_max_vals() is reached when
processing both 32 and 64-bit addition operations. While adjust_reg_min_max_vals()
knows whether dst_reg was produced by a 32 or a 64-bit addition (based on the
alu32 bool), the only information saved in dst_reg is the id of the source
register (reg->id, or'ed by BPF_ADD_CONST) and the value of the constant
offset (reg->off).
Later, the function sync_linked_regs() will attempt to use this information
to propagate bounds information from one register (known_reg) to others,
meaning, for all R in linked_regs, it copies known_reg range (and possibly
adjusting delta) into R for the case of R->id == known_reg->id.
For the delta adjustment, meaning, matching reg->id with BPF_ADD_CONST, the
verifier adjusts the register as reg = known_reg; reg += delta where delta
is computed as (s32)reg->off - (s32)known_reg->off and placed as a scalar
into a fake_reg to then simulate the addition of reg += fake_reg. This is
only correct, however, if the value in reg was created by a 64-bit addition.
When reg contains the result of a 32-bit addition operation, its upper 32
bits will always be zero. sync_linked_regs() on the other hand, may cause
the verifier to believe that the addition between fake_reg and reg overflows
into those upper bits. For example, if reg was generated by adding the
constant 1 to known_reg using a 32-bit alu operation, then reg->off is 1
and known_reg->off is 0. If known_reg is known to be the constant 0xFFFFFFFF,
sync_linked_regs() will tell the verifier that reg is equal to the constant
0x100000000. This is incorrect as the actual value of reg will be 0, as the
32-bit addition will wrap around.
Example:
0: (b7) r0 = 0; R0_w=0
1: (18) r1 = 0x80000001; R1_w=0x80000001
3: (37) r1 /= 1; R1_w=scalar()
4: (bf) r2 = r1; R1_w=scalar(id=1) R2_w=scalar(id=1)
5: (bf) r4 = r1; R1_w=scalar(id=1) R4_w=scalar(id=1)
6: (04) w2 += 2147483647; R2_w=scalar(id=1+2147483647,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
7: (04) w4 += 0 ; R4_w=scalar(id=1+0,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
8: (15) if r2 == 0x0 goto pc+1
10: R0=0 R1=0xffffffff80000001 R2=0x7fffffff R4=0xffffffff80000001 R10=fp0
What can be seen here is that r1 is copied to r2 and r4, such that {r1,r2,r4}.id
are all the same which later lets sync_linked_regs() to be invoked. Then, in
a next step constants are added with alu32 to r2 and r4, setting their ->off,
as well as id |= BPF_ADD_CONST. Next, the conditional will bind r2 and
propagate ranges to its linked registers. The verifier now believes the upper
32 bits of r4 are r4=0xffffffff80000001, while actually r4=r1=0x80000001.
One approach for a simple fix suitable also for stable is to limit the constant
delta tracking to only 64-bit alu addition. If necessary at some later point,
BPF_ADD_CONST could be split into BPF_ADD_CONST64 and BPF_ADD_CONST32 to avoid
mixing the two under the tradeoff to further complicate sync_linked_regs().
However, none of the added tests from dedf56d775 ("selftests/bpf: Add tests
for add_const") make this necessary at this point, meaning, BPF CI also passes
with just limiting tracking to 64-bit alu addition.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241016134913.32249-1-daniel@iogearbox.net
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes: f0d74c4da1 ("bpf: Parameterize task iterators.")
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-1-linux@jordanrome.com
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c7 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
