No longer document drivers should switch to lib80211,
they really should never have done that. While at it,
also remove the recommendation to use cfg80211, if it
switches to mac80211 then it implicitly uses cfg80211
but doesn't need to do anything about that, normally.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241007202707.87481ddcfc00.I2cfb9940807e9c5017a052efcd3d1f2b6dc15fb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This driver is using lib80211 and any driver that plans to ever
leave staging should never have done that, so remove the driver
to enable cleaning up lib80211 into libipw inside the old Intel
drivers.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241007202707.d0e59cdd2cdc.I8e4d74a6e1d09eefe1f5e2e208735ba2ccef1d4f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 'cfg80211_free_coalesce', '&coalesce->rules[i]' is a pointer
to VLA member of 'struct cfg80211_coalesce' and should never be NULL,
so redundant check may be dropped.
I think this is correct, but I haven't tested it seriously.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Link: https://patch.msgid.link/20241003095912.218465-1-d.kandybka@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240930112121.95324-28-Julia.Lawall@inria.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f9955 ("wifi: mac80211: add support for DFS with multiple radios")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The chandef parameter passed to ieee80211_ie_build_he_oper() and
ieee80211_ie_build_eht_oper is read-only. Since it is never modified,
add the const qualifier to this parameter. This makes these consistent
with ieee80211_ie_build_ht_oper() and ieee80211_ie_build_vht_oper().
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240910-wireless-utils-constify-v1-1-e59947bcb3c3@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As commit cbe16f35bee6 ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, the code below is subobtimal. IRQF_NO_AUTOEN flag can be used by
drivers to request_irq(). It prevents the automatic enabling of the
requested interrupt in the same safe way. With that the usage can be
simplified and corrected.
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-4-ruanjinjie@huawei.com
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-3-ruanjinjie@huawei.com
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: cd8d3d321285 ("p54spi: p54spi driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-2-ruanjinjie@huawei.com
Providing the random seed to firmware was tied to the fact that the
device has a valid OTP, which worked for some Apple chips. However,
it turns out the BCM43752 device also needs the random seed in order
to get firmware running. Suspect it is simply tied to the firmware
branch used for the device. Introducing a mechanism to allow setting
it for a device through the device table.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-4-9d80fea5326d@wesion.com
WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
to the top of brcmf_of_probe. Change function prototypes from void
to int and add appropriate errno's for return values that will be
send to bus when error occurred.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wesion.com
Not only AP6275P Wi-Fi device but also all Broadcom wireless devices allow
external low power clock input. In DTS the clock as an optional choice in
the absence of an internal clock.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-2-9d80fea5326d@wesion.com
It's the device id used by AP6275P which is the Wi-Fi module
used by Rockchip's RK3588 evaluation board and also used in
some other RK3588 boards.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-1-9d80fea5326d@wesion.com
Resources definition can become simpler and more organised by
using the dedicated helpers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Tested-by: Sabeeh Khan <sabeeh-khan@ti.com>
Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-4-vassilisamir@gmail.com
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type().
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-2-vassilisamir@gmail.com
EPROBE_DEFER, which probably wasn't available when this driver was
written, can be used instead of waiting manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleans it up automatically. No need to handle manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switching to devm management of mii_bus allows to remove
mdiobus_unregister calls and thus avoids needing a mii_bus global struct
member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's the last to go in remove. Safe to let devm handle it.
Also move request_irq to probe for clarity. It's removed in _remove not
close.
Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows to simplify the code slightly. This is safe to do as free_netdev
gets called last.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context info allows continuing DUMP requests, shall they fill the
netlink buffer.
In the case of filtered DUMP requests, a reference on the netdev is
grabbed in the .start() callback and release in .done().
Unfiltered DUMP request don't need the dev pointer to be set in the context
info, doing so will trigger an unwanted netdev_put() in .done().
Reported-by: syzbot+e9ed4e4368d450c8f9db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d3bf150621d361a7@google.com/
Fixes: 17194be4c8e1 ("net: ethtool: Introduce a command to list PHYs on an interface")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240913100515.167341-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbhXBwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28byH+B/0ctrcmzjguuddiCiUkMS0EJaocxnE7
Et3eZtV66QlxLahTOQDAcePVIyeq1Rzc8vsruNu0QJje2Yp21WITQbl9x2dX/JEl
sPggkKpu7ERKE1vS4+HEgr3PXbjXFbF6k38jygiswG0vYzKkBT5keHJ7f9qPC+cU
BdXr+ZjYK0I5TQBOQKSH4FlKVtXSidxvYRVT4AHcQ0k3vegMc7J+/fgAaznsS85p
nwV1PsXXNQh7nM5jqdMSbibL8jvgDFiSyxtQLDogqd0ah0bYOAmyiEONv6v4UGkF
1blHqiyHUnslMYgHL/C3U0cQF8ETrDd25FOpPr1pbKbW+/KueO9Y1IyP
=kclM
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return an error if dma_set_mask_and_coherent() fails. Don't return
success.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the drivers which used this header have been deleted, most
of these code is obsoleted, move the only defines that are actually
used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the
file completely.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nelson Escobar says:
====================
enic: Report per queue stats
Patch #1: Use a macro instead of static const variables for array sizes. I
didn't want to add more static const variables in the next patch
so clean up the existing ones first.
Patch #2: Collect per queue statistics
Patch #3: Report per queue stats in netdev qstats
Patch #4: Report some per queue stats in ethtool
# NETIF="eno6" tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..5
ok 1 stats.check_pause # XFAIL pause not supported by the device
ok 2 stats.check_fec # XFAIL FEC not supported by the device
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": "34"}'
[{'ifindex': 34,
'rx-bytes': 66762680,
'rx-csum-unnecessary': 1009345,
'rx-hw-drop-overruns': 0,
'rx-hw-drops': 0,
'rx-packets': 1009673,
'tx-bytes': 137936674899,
'tx-csum-none': 125,
'tx-hw-gso-packets': 2408712,
'tx-needs-csum': 2431531,
'tx-packets': 15475466,
'tx-stop': 0,
'tx-wake': 0}]
v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com
v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com
====================
Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add DSCP selector support
Currently, the kernel rejects IPv4 FIB rules that try to match on the
upper three DSCP bits:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
The reason for that is that historically users of the FIB lookup API
only populated the lower three DSCP bits in the TOS field of the IPv4
flow key ('flowi4_tos'), which fits the TOS definition from the initial
IPv4 specification (RFC 791).
This is not very useful nowadays and instead some users want to be able
to match on the six bits DSCP field, which replaced the TOS and IP
precedence fields over 25 years ago (RFC 2474). In addition, the current
behavior differs between IPv4 and IPv6 which does allow users to match
on the entire DSCP field using the TOS selector.
Recent patchsets made sure that callers of the FIB lookup API now
populate the entire DSCP field in the IPv4 flow key. Therefore, it is
now possible to extend FIB rules to match on DSCP.
This is done by adding a new DSCP attribute which is implemented for
both IPv4 and IPv6 to provide user space programs a consistent behavior
between both address families.
The behavior of the old TOS selector is unchanged and IPv4 FIB rules
using it will only match on the lower three DSCP bits. The kernel will
reject rules that try to use both selectors.
Patch #1 adds the new DSCP attribute but rejects its usage.
Patches #2-#3 implement IPv4 and IPv6 support.
Patch #4 allows user space to use the new attribute.
Patches #5-#6 add selftests.
====================
Link: https://patch.msgid.link/20240911093748.3662015-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that locally generated traffic from a socket that specifies a DS
Field using the IP_TOS / IPV6_TCLASS socket options is correctly
redirected using a FIB rule that matches on DSCP. Add negative tests to
verify that the rule is not it when it should not. Test with both IPv4
and IPv6 and with both TCP and UDP sockets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for the new FIB rule DSCP selector. Test with both IPv4 and
IPv6 and with both input and output routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that both IPv4 and IPv6 support the new DSCP selector, enable user
space to configure FIB rules that make use of it by changing the policy
of the new DSCP attribute so that it accepts values in the range of [0,
63].
Use NLA_U8 rather than NLA_UINT as the field is of fixed size.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement support for the new DSCP selector that allows IPv6 FIB rules
to match on the entire DSCP field. This is done despite the fact that
the above can be achieved using the existing TOS selector, so that user
space program will be able to work with IPv4 and IPv6 rules in the same
way.
Differentiate between both selectors by adding a new bit in the IPv6 FIB
rule structure that is only set when the 'FRA_DSCP' attribute is
specified by user space. Reject rules that use both selectors.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement support for the new DSCP selector that allows IPv4 FIB rules
to match on the entire DSCP field, unlike the existing TOS selector that
only matches on the three lower DSCP bits.
Differentiate between both selectors by adding a new bit in the IPv4 FIB
rule structure (in an existing one byte hole) that is only set when the
'FRA_DSCP' attribute is specified by user space. Reject rules that use
both selectors.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FIB rule TOS selector is implemented differently between IPv4 and
IPv6. In IPv4 it is used to match on the three "Type of Services" bits
specified in RFC 791, while in IPv6 is it is used to match on the six
DSCP bits specified in RFC 2474.
Add a new FIB rule attribute to allow matching on DSCP. The attribute
will be used to implement a 'dscp' selector in ip-rule with a consistent
behavior between IPv4 and IPv6.
For now, set the type of the attribute to 'NLA_REJECT' so that user
space will not be able to configure it. This restriction will be lifted
once both IPv4 and IPv6 support the new attribute.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
