ipv6_destopt_rcv() and ipv6_parse_hopopts() pulls these data
- Hop-by-Hop/Destination Options Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
and calls ip6_parse_tlv(), so it need not check if skb_headlen() is less
than skb_transport_offset(skb) + (skb_transport_header(skb)[1] << 3).
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need not reload hdr in ipv6_srh_rcv() unless we call
pskb_expand_head().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_srh_rcv(), so pskb_pull() in ipv6_srh_rcv() never
fails and can be replaced with skb_pull().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_rpl_srh_rcv() checks if ipv6_hdr(skb)->daddr or ohdr->rpl_segaddr[i]
is the multicast address with ipv6_addr_type().
We have the same check for ipv6_hdr(skb)->daddr in ipv6_rthdr_rcv(), so we
need not recheck it in ipv6_rpl_srh_rcv().
Also, we should use ipv6_addr_is_multicast() for ohdr->rpl_segaddr[i]
instead of ipv6_addr_type().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Eric Dumazet pointed out [0], ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_rpl_srh_rcv(). We can remove pskb_may_pull() and
replace pskb_pull() with skb_pull() in ipv6_rpl_srh_rcv().
Link: https://lore.kernel.org/netdev/CANn89iLboLwLrHXeHJucAqBkEL_S0rJFog68t7wwwXO-aNf5Mg@mail.gmail.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Splicing to SOCK_RAW sockets may set MSG_SPLICE_PAGES, but in such a case,
__ip_append_data() will call skb_splice_from_iter() to access the 'from'
data, assuming it to point to a msghdr struct with an iter, instead of
using the provided getfrag function to access it.
In the case of raw_sendmsg(), however, this is not the case and 'from' will
point to a raw_frag_vec struct and raw_getfrag() will be the frag-getting
function. A similar issue may occur with rawv6_sendmsg().
Fix this by ignoring MSG_SPLICE_PAGES if getfrag != ip_generic_getfrag as
ip_generic_getfrag() expects "from" to be a msghdr*, but the other getfrags
don't. Note that this will prevent MSG_SPLICE_PAGES from being effective
for udplite.
This likely affects ping sockets too. udplite looks like it should be okay
as it expects "from" to be a msghdr.
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000ae4cbf05fdeb8349@google.com/
Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Tested-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1410156.1686729856@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299a8d ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/
tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.
Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app. Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.
Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.
Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.
Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New users of dev_get_by_index() and dev_get_by_name() keep
getting added and it would be nice to steer them towards
the APIs with reference tracking.
Add variants of those calls which allocate the reference
tracker and use them in a couple of places.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before Linux v5.8 an AF_INET6 SOCK_DGRAM (udp/udplite) socket
with SOL_UDP, UDP_ENCAP, UDP_ENCAP_ESPINUDP{,_NON_IKE} enabled
would just unconditionally use xfrm4_udp_encap_rcv(), afterwards
such a socket would use the newly added xfrm6_udp_encap_rcv()
which only handles IPv6 packets.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benedict Wong <benedictwong@google.com>
Cc: Yan Yan <evitayan@google.com>
Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Allow splice to undo the effects of MSG_MORE after prematurely ending a
splice/sendfile due to getting an EOF condition (->splice_read() returned
0) after splice had called sendmsg() with MSG_MORE set when the user didn't
set MSG_MORE.
For UDP, a pending packet will not be emitted if the socket is closed
before it is flushed; with this change, it be flushed by ->splice_eof().
For TCP, it's not clear that MSG_MORE is actually effective.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
. .
. Addresses[1..n] .
. .
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address. When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes
n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the
value is not zero, the SRH is forwarded to the next hop. Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed. Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom. However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes). If the decompressed size overflows the room, skb_push() hits BUG()
below [0].
Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.
[0]:
skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90000003da0 EFLAGS: 00000246
RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540
RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff
R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800
R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190
FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
skb_push (net/core/skbuff.c:210)
ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5494)
process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
__napi_poll (net/core/dev.c:6496)
net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:396)
__dev_queue_xmit (net/core/dev.c:4272)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:724 net/socket.c:747)
__sys_sendto (net/socket.c:2144)
__x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea
RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003
RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b
</TASK>
Modules linked in:
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This following message is printed in the console each time a network
device configured with an IPv6 addresses is ready to be used:
ADDRCONF(NETDEV_CHANGE): <iface>: link becomes ready
When netns are being extensively used -- e.g. by re-creating netns' with
veth to discuss with each others for testing purposes like mptcp_join.sh
selftest does -- it generates a lot of messages like that: more than 700
when executing mptcp_join.sh with the latest version.
It looks like this message is not that helpful after all: maybe it can
be used as a sign to know if there is something wrong, e.g. if a device
is being regularly reconfigured by accident? But even then, there are
better ways to monitor and diagnose such issues.
When looking at commit 3c21edbd1137 ("[IPV6]: Defer IPv6 device
initialization until the link becomes ready.") which introduces this new
message, it seems it had been added to verify that the new feature was
working as expected. It could have then used a lower level than "info"
from the beginning but it was fine like that back then: 17 years ago.
It seems then OK today to simply lower its level, similar to commit
7c62b8dd5ca8 ("net/ipv6: lower the level of "link is not ready" messages")
and as suggested by Mat [1], Stephen and David [2].
Link: https://lore.kernel.org/mptcp/614e76ac-184e-c553-af72-084f792e60b0@kernel.org/T/ [1]
Link: https://lore.kernel.org/netdev/68035bad-b53e-91cb-0e4a-007f27d62b05@tessares.net/T/ [2]
Suggested-by: Mat Martineau <martineau@kernel.org>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save a bit a space, and could help future sysctls to
use the same pattern.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_gro_complete() function only updates the skb fields related to GRO
and it always returns zero. All the 3 drivers which are using it
do not check for the return value either.
Change it to return void instead which simplifies its callers as
error handing becomes unnecessary.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: c61a40432509 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make IP6/UDP6 sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator if possible, copying the data if not.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Don't keep hand coded offset caluclations and replace it with
container_of(). It should be type safer and a bit less confusing.
It also makes it with a macro instead of inline function to preserve
constness, which was previously casted out like in case of
tcp_v6_send_synack().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In processing IPv6 segment routing header (SRH), several functions call
skb_dst_drop before ip6_route_input. However, ip6_route_input calls
skb_dst_drop within it, so there is no need to call skb_dst_drop in advance.
Signed-off-by: Yuya Tajima <yuya.tajimaa@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As low_thresh has no work in fragment reassembles,del it.
And Mark it deprecated in sysctl Document.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 20704bd1633d ("erspan: build the header with the right proto
according to erspan_ver"), it gets the proto with t->parms.erspan_ver,
but t->parms.erspan_ver is not used by collect_md branch, and instead
it should get the proto with md->version for collect_md.
Thanks to Kevin for pointing this out.
Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver")
Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support")
Reported-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.
Packetdrill script to test the above,
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > (flowlabel 0x1) S 0:0(0) <...>
// Wrong ack seq, trigger a rst.
+0 < S. 0:0(0) ack 0 win 4000
// Check the flowlabel matches prior one from SYN.
+0 > (flowlabel 0x1) R 0:0(0) <...>
Fixes: 9258b8b1be2e ("ipv6: tcp: send consistent autoflowlabel in RST packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a2401 ("gue: TX support for using remote checksum offload option").
Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xfrm_alloc_dst() followed by xfrm4_dst_destroy(), without a
xfrm4_fill_dst() call in between, causes the following BUG:
BUG: spinlock bad magic on CPU#0, fbxhostapd/732
lock: 0x890b7668, .magic: 890b7668, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 732 Comm: fbxhostapd Not tainted 6.3.0-rc6-next-20230414-00613-ge8de66369925-dirty #9
Hardware name: Marvell Kirkwood (Flattened Device Tree)
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x28/0x30
dump_stack_lvl from do_raw_spin_lock+0x20/0x80
do_raw_spin_lock from rt_del_uncached_list+0x30/0x64
rt_del_uncached_list from xfrm4_dst_destroy+0x3c/0xbc
xfrm4_dst_destroy from dst_destroy+0x5c/0xb0
dst_destroy from rcu_process_callbacks+0xc4/0xec
rcu_process_callbacks from __do_softirq+0xb4/0x22c
__do_softirq from call_with_stack+0x1c/0x24
call_with_stack from do_softirq+0x60/0x6c
do_softirq from __local_bh_enable_ip+0xa0/0xcc
Patch "net: dst: Prevent false sharing vs. dst_entry:: __refcnt" moved
rt_uncached and rt_uncached_list fields from rtable struct to dst
struct, so they are more zeroed by memset_after(xdst, 0, u.dst) in
xfrm_alloc_dst().
Note that rt_uncached (list_head) was never properly initialized at
alloc time, but xfrm[46]_dst_destroy() is written in such a way that
it was not an issue thanks to the memset:
if (xdst->u.rt.dst.rt_uncached_list)
rt_del_uncached_list(&xdst->u.rt);
The route code does it the other way around: rt_uncached_list is
assumed to be valid IIF rt_uncached list_head is not empty:
void rt_del_uncached_list(struct rtable *rt)
{
if (!list_empty(&rt->dst.rt_uncached)) {
struct uncached_list *ul = rt->dst.rt_uncached_list;
spin_lock_bh(&ul->lock);
list_del_init(&rt->dst.rt_uncached);
spin_unlock_bh(&ul->lock);
}
}
This patch adds mandatory rt_uncached list_head initialization in
generic dst_init(), and adapt xfrm[46]_dst_destroy logic to match the
rest of the code.
Fixes: d288a162dd1c ("net: dst: Prevent false sharing vs. dst_entry:: __refcnt")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304162125.18b7bcdd-oliver.sang@intel.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
CC: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Link: https://lore.kernel.org/r/20230420182508.2417582-1-mbizon@freebox.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a missing 8 byte for the header size calculation. The
ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which
points to skb_transport_header(). Currently we only check on the
calculated addresses fields using CmprI and CmprE fields, see:
https://www.rfc-editor.org/rfc/rfc6554#section-3
there is however a missing 8 byte inside the calculation which stands
for the fields before the addresses field. Those 8 bytes are represented
by sizeof(struct ipv6_rpl_sr_hdr) expression.
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reported-by: maxpl0it <maxpl0it@protonmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the
IPV6_2292PKTOPTIONS case. Make sure to initialise
msg_control_is_user accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f455 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc48c3 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cdec3d ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a8165a ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a44 ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Under high contention dst_entry::__refcnt becomes a significant bottleneck.
atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into
high retry rates on contention.
Switch the reference count to rcuref_t which results in a significant
performance gain. Rename the reference count member to __rcuref to reflect
the change.
The gain depends on the micro-architecture and the number of concurrent
operations and has been measured in the range of +25% to +130% with a
localhost memtier/memcached benchmark which amplifies the problem
massively.
Running the memtier/memcached benchmark over a real (1Gb) network
connection the conversion on top of the false sharing fix for struct
dst_entry::__refcnt results in a total gain in the 2%-5% range over the
upstream baseline.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de
Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_entry::__refcnt is highly contended in scenarios where many connections
happen from and to the same IP. The reference count is an atomic_t, so the
reference count operations have to take the cache-line exclusive.
Aside of the unavoidable reference count contention there is another
significant problem which is caused by that: False sharing.
perf top identified two affected read accesses. dst_entry::lwtstate and
rtable::rt_genid.
dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into
a seperate cacheline vs. the read mostly members located at the beginning
of the struct.
That prevents false sharing vs. the struct members in the first 64
bytes of the structure, but there is also
dst_entry::lwtstate
which is located after the reference count and in the same cache line. This
member is read after a reference count has been acquired.
struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a
size of 112 bytes, which means that the struct members of rtable which
follow the dst member share the same cache line as dst_entry::__refcnt.
Especially
rtable::rt_genid
is also read by the contexts which have a reference count acquired
already.
When dst_entry:__refcnt is incremented or decremented via an atomic
operation these read accesses stall. This was found when analysing the
memtier benchmark in 1:100 mode, which amplifies the problem extremly.
Move the rt[6i]_uncached[_list] members out of struct rtable and struct
rt6_info into struct dst_entry to provide padding and move the lwtstate
member after that so it ends up in the same cache line.
The resulting improvement depends on the micro-architecture and the number
of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached
benchmark.
[ tglx: Rearrange struct ]
Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
