This adds additional calibscale attributes to the ABI documentation for
instances found in drivers by searching the code for:
BIT(IIO_CHAN_INFO_CALIBSCALE)
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240815-iio-abi-calib-audit-v1-3-536b2fea8620@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a number of light sensor drivers that have various
calibscale_available attributes. Up to now, these were missing from
the documentation.
Kernel version 4.8 is used since the first use appears to be in
commit eb869ade30a6 ("iio: Add tcs3472 color light sensor driver").
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240815-iio-abi-calib-audit-v1-1-536b2fea8620@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
counts_per_uvi depends on the current value of gain and resolution.
Hence, we cannot use the hardcoded value 96.
The `counts_per_uvi` function gives the count based on the current gain
and resolution (integration time).
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240814113135.14575-3-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new ALS channel and allow reading lux and scale values.
Also provide gain and resolution configuration for ALS channel.
Add automatic mode switching between the UVS and ALS channel
based on which channel is being accessed.
The default mode in which the sensor start is ALS mode.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240814113135.14575-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the ad4695 documentation to say that buffered reads are
supported. Since there are 4 possible modes of reading conversion data,
it is useful to know which one is actually being used, namely the
advanced sequencer mode.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240813-iio-adc-ad4695-buffered-read-v2-2-9bb19fc1924b@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This implements buffered reads for the ad4695 driver using the typical
triggered buffer implementation, including adding a soft timestamp
channel.
The chip has 4 different modes for doing conversions. The driver is
using the advanced sequencer mode since that is the only mode that
allows individual configuration of all aspects each channel (e.g.
bipolar config currently and oversampling to be added in the future).
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240813-iio-adc-ad4695-buffered-read-v2-1-9bb19fc1924b@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If we're returning because "reg >= HX9023S_CH_NUM" then set the error code
to -ENIVAL instead of success.
Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/49b5a9bc-e5ca-43a7-a665-313eb06fbe27@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current code is always iterating over two fields in the
noa1305_int_time_available array. Fix iteration limit, which
has to be halved to avoid out of bounds access in case the
value that is being looked up is not in the array.
Fixes: 025f23cfebad ("iio: light: noa1305: Make integration time configurable")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240814191946.81386-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215.
The ENS21x is a family of temperature and relative humidity sensors with
accuracies tailored to the needs of specific applications.
Signed-off-by: Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
Link: https://patch.msgid.link/20240805-ens21x-v6-2-5bb576ef26a6@thegoodpenguin.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree documentation for ENS210 family of temperature and
humidity sensors
Signed-off-by: Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240805-ens21x-v6-1-5bb576ef26a6@thegoodpenguin.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16460_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-4-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16400_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-3-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16480_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-2-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return early in case debugfs is not
present. Since this is known at compile time, it allows the compiler to
drop any unused code. Therefore no need to wrap the code with #ifdef.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-1-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This error path was intended to return, and not just print an error. The
current code will lead to an error pointer dereference.
Fixes: 371f778b83cd ("iio: adc: add support for pac1921")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/1fa4ab12-0939-477d-bc92-306fd32e4fd9@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This comparison should be >= ARRAY_SIZE() instead of >. The "mspan"
variable is later used as an array index into ltc2664_mspan_lut[] so
this is an off by one bug.
Fixes: 4cc2fc445d2e ("iio: dac: ltc2664: Add driver for LTC2664 and LTC2672")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/5727ab54-6280-466e-b107-1b6006e5ab29@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Prevent triggers from stop working after the device has entered sleep:
use iio_device_suspend_triggering and iio_device_resume_triggering helpers.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240807185619.7261-3-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When a machine enters a sleep state while a trigger is associated to
an iio device that trigger is not resumed after exiting the sleep state:
provide iio device drivers a way to suspend and resume
the associated trigger to solve the aforementioned bug.
Each iio driver supporting external triggers is expected to call
iio_device_suspend_triggering before suspending,
and iio_device_resume_triggering upon resuming.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240807185619.7261-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add rockchip,rk3576-saradc compatible string.
The saradc on RK3576 is compatible with the one on RK3588, so they are
used together in an arm of the oneOf.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240802214612.434179-5-detlev.casanova@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Proximity and gesture offset registers perform offset correction to
improve cross-talk performance. Added `calibbias` to the proximity
and gesture channels.
Provided facility to set calibbias based on the channel number.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240804134212.51682-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add scaling support to STM32 DFSDM.
When used in an analog context, a DFSDM filter typically converts the data
from a sigma delta modulator. The IIO device associated to the DFSDM
filter provides these data as raw data.
The IIO device can provide scaling information (voltage and offset) to
allow conversion of raw data into physical values.
With the new binding based on IIO backend framework, the sigma delta
modulators are defined as backends providing scaling information.
The scaling is not supported with legacy binding.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-10-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-9-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move to generic channels binding to ease new backend framework adoption
and prepare the convergence with MDF IP support on STM32MP2 SoC family.
Legacy binding:
DFSDM is an IIO channel consumer.
SD modulator is an IIO channels provider.
The channel phandles are provided in DT through io-channels property
and channel indexes through st,adc-channels property.
New binding:
DFSDM is an IIO channel provider.
The channel indexes are given by reg property in channel child node.
This new binding is intended to be used with SD modulator IIO backends.
It does not support SD modulator legacy IIO devices.
The st,adc-channels property presence is used to discriminate
between legacy and backend bindings.
The support of the DFSDM legacy channels and SD modulator IIO devices
is kept for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-8-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow to specify the reference voltage used by the SD modulator.
When the SD modulator is defined as an IIO backend, the reference
voltage can be used to evaluate scaling information of the IIO device.
The reference voltage is not used otherwise.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-7-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-6-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the DFSDM binding to use the new IIO backend framework,
along with the adoption of IIO generic channels.
This binding change allows to add scaling support to the DFSDM.
Keep the legacy binding as deprecated for backward compatibility.
The io-backends property is supported only in generic IIO channel
binding.
- Channel description with the generic binding (Audio and Analog):
Properties superseded by generic properties:
st,adc-channels: becomes "reg" property in channel node
st,adc-channel-names: becomes "label" property in channel node
Properties moved to channel child node:
st,adc-channel-types: becomes st,adc-channel-type
st,adc-channel-clk-src, st,adc-alt-channel
- Analog binding:
DFSDM filter channel is configured as an IIO backend consumer.
Add io-backends property in channel child nodes.
DFSDM is no more configured as a channel consumer from SD modulator.
Use of io-channels in DFSDM node is deprecated.
- Audio binding:
DFSDM audio DAI is configured as a channel consumer from DFSDM filter.
No change compare to legacy.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-5-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an API to support IIO generic channels binding:
http://devicetree.org/schemas/iio/adc/adc.yaml#
This new API is needed, as generic channel DT node isn't populated as a
device.
Add devm_iio_backend_fwnode_get() to allow an IIO device backend
consumer to reference backend phandles in its child nodes.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-4-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio_backend_disable() and iio_backend_enable() APIs to allow
IIO backend consumer to request backend disabling and enabling.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-3-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio_backend_read_scale() and iio_backend_read_offset() services
to read channel scale and offset from an IIO backbend device.
Also add a read_raw callback which replicates the read_raw callback of
the IIO framework, and is intended to request miscellaneous channel
attributes from the backend device.
Both scale and offset helpers use this callback.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-2-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806053016.6401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Trivial cleanup in __iio_format_value() for the IIO_VAL_FRACTIONAL case
where tmp1 = vals[1] assignment is unneeded and irrelevant since tmp1 is
immediately overwritten by the subsequent div_s64_rem() call.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-clean-fmt-value-v1-1-3e1c3deafc33@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
During setup the st->adc_control is 0, which corresponds to a continuous
conversion mode. The reset value for channel 1 is to enable it. The
combined effect of these two is that the ADC will start conversions for
channel 1 without them being read.
This is not neccessarily a problem, but it is an unexpected behavior.
Set the ADC state to idle during setup to avoid this.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-4-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_init_config_vref() function writes the AD7124_ADC_CONTROL
register for each channel that is configured to use the internal
reference.
The ad7124_write_config()function performs 7 SPI transfers for
configuring 2 registers: config_x and filter_x.
Reduce the number of SPI transfers:
-during the probe by only setting the st->adc_control value in
ad7124_init_config_vref() and writing to the device only at the end of
ad7124_setup().
-in ad7124_write_config() by grouping writes to the same register.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-3-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring and reading the gain and resolution
(integration time). Also provide the available values for gain and
resoltion respectively via `read_avail` callback.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240731063706.25412-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One useful thing to do (in case of problems) in this high speed devices
with digital interfaces is to try different test patterns to see if the
interface is working properly (and properly calibrated). Hence add this
to debugfs.
On top of this, for some test patterns, the backend may have a matching
validator block which can be helpful in identifying possible issues. For
the other patterns some test equipment must be used so one can look into
the signal and see how it looks like.
Hence, we also add the backend debugfs interface with
iio_backend_debugfs_add().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-8-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Group the backend configurations to be done in preparing and stopping
calibration in two new helpers analogous to ad9467_testmode_set(). This
is in preparation for adding support for debugFS test_mode where
we need similar configurations as in the calibration process.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-7-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new axi_adc_read_chan_status() helper so we get the raw register
value out of it.
This is in preparation of a future change where we really want to look
into dedicated bits of the register.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-5-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a basic debugfs interface for backends. Two new ops are being
added:
* debugfs_reg_access: Analogous to the core IIO one but for backend
devices.
* debugfs_print_chan_status: One useful usecase for this one is for
testing test tones in a digital interface and "ask" the backend to
dump more details on why a test tone might have errors.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-2-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of only passing the backend ops when calling
devm_iio_backend_register(), pass an info like structure that will
contains the ops and additional information. Fow now, the backend name
is being added as that will be used by the debugFS interface introduced
in a later patch.
It also opens the door for further customizations passed by backends.
All users of devm_iio_backend_register() were updated accordingly.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-1-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
