Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The variable netype is assigned a value that is never read, the assignment
is redundant the variable can be removed.
Message-Id: <20230105134925.45599-1-colin.i.king@gmail.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.
CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.
Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
There is a spelling mistake in a udf_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230231452.5821-1-colin.i.king@gmail.com>
When rounding the last extent to blocksize in inode_getblk() we forgot
to update also i_lenExtents to match the new extent length. This
inconsistency can later confuse some assertion checks.
Signed-off-by: Jan Kara <jack@suse.cz>
When expanding file for a write into a hole, we were not updating total
length of inode's extents properly. Move the update of i_lenExtents into
udf_do_extend_file() so that both expanding of file by truncate and
expanding of file by writing beyond EOF properly update the length of
extents. As a bonus, we also correctly update the length of extents when
only part of extents can be written.
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we allocate name buffer in directory iterators (struct
udf_fileident_iter) on stack. These structures are relatively large
(some 360 bytes on 64-bit architectures). For udf_rename() which needs
to keep three of these structures in parallel the stack usage becomes
rather heavy - 1536 bytes in total. Allocate the name buffer in the
iterator from heap to avoid excessive stack usage.
Link: https://lore.kernel.org/all/202212200558.lK9x1KW0-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When adding extent to a file fails, so far we've silently squelshed the
error. Make sure to propagate it up properly.
Signed-off-by: Jan Kara <jack@suse.cz>
When adding extent describing symlink data fails, make sure to handle
the error properly, propagate it up and free the already allocated
block.
Signed-off-by: Jan Kara <jack@suse.cz>
When there is an error when adding extent to the directory to expand it,
make sure to propagate the error up properly. This is not expected to
happen currently but let's make the code more futureproof.
Signed-off-by: Jan Kara <jack@suse.cz>
When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.
CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Provide function udf_fiiter_delete_entry() to mark directory entry as
deleted using new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz>
There is just one caller of udf_expand_dir_adinicb(). Move the function
to its caller into namei.c as it is more about directory handling than
anything else anyway.
Signed-off-by: Jan Kara <jack@suse.cz>
Add new support code for iterating directory entries. The code is also
more carefully verifying validity of on-disk directory entries to avoid
crashes on malicious media.
Signed-off-by: Jan Kara <jack@suse.cz>
The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmOXWlMACgkQnJ2qBz9k
QNltfwf9GIEZASzX/v2LXYInbgvJnuRxeNoNFDZjatz+Nk17fJ9P0Fzcu7OztMTk
+4HX3pxXYn/eFTyxVf5c3C2gU4KDV2InrYk+IyA7unZ92ROO5uaxrrknSPouYXoO
fd0zwlMQ8bxk7wgjSnG+0Q38dbWr9XgYRqcURjXvRG9e68o49SXTc333lXc+l25X
WphjDK6d1gXWiHKdYVYiROF7HjAjaeRk8clXtFhHmyGvhi+wvfP6mqOhzMCRuR7U
M1dYR/B2+AJieOmVK1gqsLFc2f/TN3AEYMsRi256vYEuQhY7WRkxQw6afmYsLc8J
sjj4mR15SwZewLtIlNbX3phvi1OBWA==
=Q4qw
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf and ext2 fixes from Jan Kara:
- a couple of smaller cleanups and fixes for ext2
- fixes of a data corruption issues in udf when handling holes and
preallocation extents
- fixes and cleanups of several smaller issues in udf
- add maintainer entry for isofs
* tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix extending file within last block
udf: Discard preallocation before extending file with a hole
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
udf: Fix preallocation discarding at indirect extent boundary
udf: Increase UDF_MAX_READ_VERSION to 0x0260
fs/ext2: Fix code indentation
ext2: unbugger ext2_empty_dir()
udf: remove ->writepage
ext2: remove ->writepage
ext2: Don't flush page immediately for DIRSYNC directories
ext2: Fix some kernel-doc warnings
maintainers: Add ISOFS entry
udf: Avoid double brelse() in udf_rename()
fs: udf: Optimize udf_free_in_core_inode and udf_find_fileset function
When extending file within last block it can happen that the extent is
already rounded to the blocksize and thus contains the offset we want to
grow up to. In such case we would mistakenly expand the last extent and
make it one block longer than it should be, exposing unallocated block
in a file and causing data corruption. Fix the problem by properly
detecting this case and bailing out.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
When extending file with a hole, we tried to preserve existing
preallocation for the file. However that is not very useful and
complicates code because the previous extent may need to be rounded to
block boundary as well (which we forgot to do thus causing data
corruption for sequence like:
xfs_io -f -c "pwrite 0x75e63 11008" -c "truncate 0x7b24b" \
-c "truncate 0xabaa3" -c "pwrite 0xac70b 22954" \
-c "pwrite 0x93a43 11358" -c "pwrite 0xb8e65 52211" file
with 512-byte block size. Just discard preallocation before extending
file to simplify things and also fix this data corruption.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
If rounded block-rounded i_lenExtents matches block rounded i_size,
there are no preallocation extents. Do not bother walking extent linked
list.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
When preallocation extent is the first one in the extent block, the
code would corrupt extent tree header instead. Fix the problem and use
udf_delete_aext() for deleting extent to avoid some code duplication.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Some discs containing the UDF file system are unable to be mounted,
failing with the following message:
UDF-fs: error (device sr0): udf_fill_super: minUDFReadRev=260
(max is 250)
The UDF 2.60 specification [0] states in the section Basic Restrictions
& Requirements (page 10):
The Minimum UDF Read Revision value shall be at most #0250 for all
media with a UDF 2.60 file system. This indicates that a UDF 2.50
implementation can read all UDF 2.60 media. Media that do not have a
Metadata Partition may use a value lower than #250.
The conclusion is that the discs failing to mount were burned with a
faulty software, which didn't follow the specification. This can be
worked around by increasing UDF_MAX_READ_VERSION to 0x260, to match the
Minimum Read Revision. No other changes are required, as reading UDF
2.60 is backward compatible with UDF 2.50.
[0] http://www.osta.org/specs/pdf/udf260.pdf
Signed-off-by: Bartosz Taudul <wolf@nereid.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
->writepage is a very inefficient method to write back data, and only
used through write_cache_pages or as a fallback when no ->migrate_folio
method is present.
Set ->migrate_folio to the generic buffer_head based helper, and remove
the ->writepage implementation in extfat.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189
memcpy+0x3c/0x60 mm/kasan/shadow.c:66
udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ffab0d164d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 3610:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:576 [inline]
udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff8880123ff800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(),
pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0
create_dummy_stack mm/page_owner.c:67 [inline]
register_early_stack+0x77/0xd0 mm/page_owner.c:83
init_page_owner+0x3a/0x731 mm/page_owner.c:93
kernel_init_freeable+0x41c/0x5d5 init/main.c:1629
kernel_init+0x19/0x2b0 init/main.c:1519
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
^
ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by changing the memory size allocated for copy_name from
UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length
(lfi) of subsequent memcpy can be up to 255.
CC: stable@vger.kernel.org
Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com
Fixes: 066b9cded00b ("udf: Use separate buffer for copying split names")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109013542.442790-1-zhangpeng362@huawei.com
syzbot reported a warning like below [1]:
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
<TASK>
invalidate_bh_lru+0x99/0x150
smp_call_function_many_cond+0xe2a/0x10c0
? generic_remap_file_range_prep+0x50/0x50
? __brelse+0xa0/0xa0
? __mutex_lock+0x21c/0x12d0
? smp_call_on_cpu+0x250/0x250
? rcu_read_lock_sched_held+0xb/0x60
? lock_release+0x587/0x810
? __brelse+0xa0/0xa0
? generic_remap_file_range_prep+0x50/0x50
on_each_cpu_cond_mask+0x3c/0x80
blkdev_flush_mapping+0x13a/0x2f0
blkdev_put_whole+0xd3/0xf0
blkdev_put+0x222/0x760
deactivate_locked_super+0x96/0x160
deactivate_super+0xda/0x100
cleanup_mnt+0x222/0x3d0
task_work_run+0x149/0x240
? task_work_cancel+0x30/0x30
do_exit+0xb29/0x2a40
? reacquire_held_locks+0x4a0/0x4a0
? do_raw_spin_lock+0x12a/0x2b0
? mm_update_next_owner+0x7c0/0x7c0
? rwlock_bug.part.0+0x90/0x90
? zap_other_threads+0x234/0x2d0
do_group_exit+0xd0/0x2a0
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that brelse() is called on both ofibh.sbh
and ofibh.ebh by udf_find_entry() when it returns NULL. However,
brelse() is called by udf_rename(), too. So, b_count on buffer_head
becomes unbalanced.
This patch fixes the issue by not calling brelse() by udf_rename()
when udf_find_entry() returns NULL.
Link: https://syzkaller.appspot.com/bug?id=8297f45698159c6bca8a1f87dc983667c1a1c851 [1]
Reported-by: syzbot+7902cd7684bc35306224@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221023095741.271430-1-syoshida@redhat.com
These two functions perform the following optimizations.
1. Delete the type cast of foo pointer. Void * does not need to convert
the type.
2. Delete the initialization assignment of bh variable, which is
assigned first.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221012104235.3331-1-zeming@nfschina.com
