mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-06 05:06:29 +00:00
7c891fe3db
5966 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Martin K. Petersen
|
7907ad748b |
Merge patch series "Use block pr_ops in LIO"
Mike Christie <michael.christie@oracle.com> says: The patches in this thread allow us to use the block pr_ops with LIO's target_core_iblock module to support cluster applications in VMs. They were built over Linus's tree. They also apply over linux-next and Martin's tree and Jens's trees. Currently, to use windows clustering or linux clustering (pacemaker + cluster labs scsi fence agents) in VMs with LIO and vhost-scsi, you have to use tcmu or pscsi or use a cluster aware FS/framework for the LIO pr file. Setting up a cluster FS/framework is pain and waste when your real backend device is already a distributed device, and pscsi and tcmu are nice for specific use cases, but iblock gives you the best performance and allows you to use stacked devices like dm-multipath. So these patches allow iblock to work like pscsi/tcmu where they can pass a PR command to the backend module. And then iblock will use the pr_ops to pass the PR command to the real devices similar to what we do for unmap today. The patches are separated in the following groups: Patch 1 - 2: - Add block layer callouts for reading reservations and rename reservation error code. Patch 3 - 5: - SCSI support for new callouts. Patch 6: - DM support for new callouts. Patch 7 - 13: - NVMe support for new callouts. Patch 14 - 18: - LIO support for new callouts. This patchset has been tested with the libiscsi PGR ops and with window's failover cluster verification test. Note that for scsi backend devices we need this patchset: https://lore.kernel.org/linux-scsi/20230123221046.125483-1-michael.christie@oracle.com/T/#m4834a643ffb5bac2529d65d40906d3cfbdd9b1b7 to handle UAs. To reduce the size of this patchset that's being done separately to make reviewing easier. And to make merging easier this patchset and the one above do not have any conflicts so can be merged in different trees. Link: https://lore.kernel.org/r/20230407200551.12660-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
10de638d8e |
s390 updates for the 6.4 merge window
- Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmRM8pwACgkQjYWKoQLX FBjV1AgAlvAhu1XkwOdwqdT4GqE8pcN4XXzydog1MYihrSO2PdgWAxpEW7o2QURN W+3xa6RIqt7nX2YBiwTanMZ12TYaFY7noGl3eUpD/NhueprweVirVl7VZUEuRoW/ j0mbx77xsVzLfuDFxkpVwE6/j+tTO78kLyjUHwcN9rFVUaL7/orJneDJf+V8fZG0 sHLOv0aljF7Jr2IIkw82lCmW/vdk7k0dACWMXK2kj1H3dIK34B9X4AdKDDf/WKXk /OSElBeZ93tSGEfNDRIda6iR52xocROaRnQAaDtargKFl9VO0/dN9ADxO+SLNHjN pFE/9VD6xT/xo4IuZZh/Z3TcYfiLvA== =Geqx -----END PGP SIGNATURE----- Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code * tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits) s390/stackleak: provide fast __stackleak_poison() implementation stackleak: allow to specify arch specific stackleak poison function s390: select ARCH_USE_SYM_ANNOTATIONS s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc() s390: wire up memfd_secret system call s390/mm: enable ARCH_HAS_SET_DIRECT_MAP s390/mm: use BIT macro to generate SET_MEMORY bit masks s390/relocate_kernel: adjust indentation s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc. s390/entry: use SYM* macros instead of ENTRY(), etc. s390/purgatory: use SYM* macros instead of ENTRY(), etc. s390/kprobes: use SYM* macros instead of ENTRY(), etc. s390/reipl: use SYM* macros instead of ENTRY(), etc. s390/head64: use SYM* macros instead of ENTRY(), etc. s390/earlypgm: use SYM* macros instead of ENTRY(), etc. s390/mcount: use SYM* macros instead of ENTRY(), etc. s390/crc32le: use SYM* macros instead of ENTRY(), etc. s390/crc32be: use SYM* macros instead of ENTRY(), etc. s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc. s390/amode31: use SYM* macros instead of ENTRY(), etc. ... |
||
|
Linus Torvalds
|
8ccd54fe45 |
virtio,vhost,vdpa: features, fixes, cleanups
reduction in interrupt rate in virtio perf improvement for VDUSE scalability for vhost-scsi non power of 2 ring support for packed rings better management for mlx5 vdpa suspend for snet VIRTIO_F_NOTIFICATION_DATA shared backend with vdpa-sim-blk user VA support in vdpa-sim better struct packing for virtio fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRG+QcPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpMyAIALpq8Z9ljl7ADGLuvt/xeCnIdifo7NXam71s +algalRplF3QplnMxZ0vH19Z8Gvyl18fkk/l0tHoCrZZgyseYR6DbyZXPv8YIfFh NSBokhil+ZURH6eNJc2PLcBUF3QIL3rSv7tBq7/++PN3KIqdHIePbyUFLlwqb272 NLkOkHT30QBtncRWJORj/GqDxi/4H1zHDmfMd6xD/1B6IrC3gin205RnLuCa2H65 bP0IE025VrmrRqNGX7nhi7dIFo6SmMPwG5O0YWeEhFHaSOL9PJM/Z9EN4tLhC1v1 Y34fryH9e+MMSgBnCK2ExxTq/pGWsbhPbvisDfDf3M1m1HHfhYI= =N1SV -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "virtio,vhost,vdpa: features, fixes, and cleanups: - reduction in interrupt rate in virtio - perf improvement for VDUSE - scalability for vhost-scsi - non power of 2 ring support for packed rings - better management for mlx5 vdpa - suspend for snet - VIRTIO_F_NOTIFICATION_DATA - shared backend with vdpa-sim-blk - user VA support in vdpa-sim - better struct packing for virtio and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits) vhost_vdpa: fix unmap process in no-batch mode MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS tools/virtio: fix build caused by virtio_ring changes virtio_ring: add a struct device forward declaration vdpa_sim_blk: support shared backend vdpa_sim: move buffer allocation in the devices vdpa/snet: use likely/unlikely macros in hot functions vdpa/snet: implement kick_vq_with_data callback virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support virtio: add VIRTIO_F_NOTIFICATION_DATA feature support vdpa/snet: support the suspend vDPA callback vdpa/snet: support getting and setting VQ state MAINTAINERS: add vringh.h to Virtio Core and Net Drivers vringh: address kdoc warnings vdpa: address kdoc warnings virtio_ring: don't update event idx on get_buf vdpa_sim: add support for user VA vdpa_sim: replace the spinlock with a mutex to protect the state vdpa_sim: use kthread worker vdpa_sim: make devices agnostic for work management ... |
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Linus Torvalds
|
b68ee1c613 |
SCSI misc on 20230426
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE 8B/xs9hodX+1fVJcVG0= =fS/j -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ... |
||
|
Linus Torvalds
|
9dd6956b38 |
for-6.4/block-2023-04-21
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
|
||
|
Viktor Prutyanov
|
af8ececda1 |
virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
According to VirtIO spec v1.2, VIRTIO_F_NOTIFICATION_DATA feature indicates that the driver passes extra data along with the queue notifications. In a split queue case, the extra data is 16-bit available index. In a packed queue case, the extra data is 1-bit wrap counter and 15-bit available index. Add support for this feature for MMIO, channel I/O and modern PCI transports. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230413081855.36643-2-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Harald Freudenberger
|
3b42877cd5 |
s390/zcrypt: rework arrays with length zero occurrences
Review and rework all the zero length array occurrences within structs to flexible array fields or comment if not used at all. However, some struct fields are there for documentation purpose or to have correct sizeof() evaluation of a struct and thus should not get deleted. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
e20985a796 |
s390/cio: replace zero-length array with flexible-array member
There are numerous patches which convert zero-length arrays with a flexible-array member. Convert the remaining s390 occurrences. Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://github.com/KSPP/linux/issues/78 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
469c701db1 |
s390/sclp: replace zero-length array with flexible-array member
There are numerous patches which convert zero-length arrays with a flexible-array member. Convert the remaining s390 occurrences. Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://github.com/KSPP/linux/issues/78 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mike Christie
|
7ba150834b |
block: Rename BLK_STS_NEXUS to BLK_STS_RESV_CONFLICT
BLK_STS_NEXUS is used for NVMe/SCSI reservation conflicts and DASD's locking feature which works similar to NVMe/SCSI reservations where a host can get a lock on a device and when the lock is taken it will get failures. This patch renames BLK_STS_NEXUS so it better reflects this type of use. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230407200551.12660-3-michael.christie@oracle.com Acked-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Stefan Haberland
|
d8898ee50e |
s390/dasd: fix hanging blockdevice after request requeue
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes:
|
||
|
Stefan Haberland
|
d9ee2bee4a |
s390/dasd: add autoquiesce event for start IO error
Add a check for errors in the start_io function that signal a not working device. Trigger an autoquiesce event in that case. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Stefan Haberland
|
0c1a147481 |
s390/dasd: add aq_timeouts autoquiesce trigger
Add a sysfs attribute aq_timeouts that controls after how many timeouts a autoquiesce event might be triggered. The default value is 32768 which is the maximum number of retries for the DASD device driver DASD_RETRIES_MAX. This means that the timeout trigger will never happen. The default value for DASD retries is 255. Setting the value to below 255 will trigger the timeout autoquiesce event before an IO error is generated. Also add the check for the configured amount of timeouts and trigger an autoquiesce event if exceeded. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Stefan Haberland
|
bdac94e295 |
s390/dasd: add aq_requeue sysfs attribute
Add a sysfs attribute to control if all IO requests will be requeued to the blocklayer in case of an autoquiesce event or not. A value of 1 means that in case of an autoquiesce event all IO requests will be requeued to the blocklayer. A value of 0 means that the device will only be stopped. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Stefan Haberland
|
9558a8e9d4 |
s390/dasd: add aq_mask sysfs attribute
Add sysfs attribute that controls the DASD autoquiesce feature. The autoquiesce is disabled when 0 is echoed to the attribute. A value greater than 0 will enable the feature. The aq_mask attribute will accept an unsigned integer and the value will be interpreted as bitmask defining the trigger events that will lead to an automatic quiesce. The following autoquiesce triggers will currently be available: DASD_EER_FATALERROR 1 - any final I/O error DASD_EER_NOPATH 2 - no remaining paths for the device DASD_EER_STATECHANGE 3 - a state change interrupt occurred DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended DASD_EER_NOSPC 5 - there is no space remaining on an ESE device DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred DASD_EER_STARTIO 7 - the IO start function encountered an error The currently supported maximum value is 255. Bit 31 is reserved for internal usage. Bit 0 is not used. Example: - deactivate autoquiesce $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT (0000 0000 0000 0000 0000 0000 0100 0110 => 70) $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Stefan Haberland
|
1cee2975bb |
s390/dasd: add autoquiesce feature
Add the internal logic to check for autoquiesce triggers and handle them. Quiesce and resume are functions that tell Linux to stop/resume issuing I/Os to a specific DASD. The DASD driver allows a manual quiesce/resume via ioctl. Autoquiesce will define an amount of triggers that will lead to an automatic quiesce if a certain event occurs. There is no automatic resume. All events will be reported via DASD Extended Error Reporting (EER) if configured. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Stefan Haberland
|
861d53dbed |
s390/dasd: remove unused DASD EER defines
Remove definitions that have never been used. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Harald Freudenberger
|
0f2d4fee91 |
s390/zcrypt: simplify prep of CCA key token
The preparation of the key data struct for a CCA RSA ME operation had some improvement to skip leading zeros in the key's exponent. However, all supported CCA cards nowadays support leading zeros in key tokens. So for simplifying the CCA key preparing code, this patch simply removes this optimization code. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Harald Freudenberger
|
bd922f33d4 |
s390/zcrypt: remove unused ancient padding code
There was some ancient code which padded the results of a clear key ME or CRT operation with some PKCS 1.2 header. According to the comment this was only needed by crypto cards older than the CEX2. These cards are not supported any more and so this patch removes this obscure result padding code. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Greg Kroah-Hartman
|
cd8fe5b6db |
Merge 6.3-rc5 into driver-core-next
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jakub Kicinski
|
79548b7984 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c |
||
|
Greg Kroah-Hartman
|
75a2d4226b |
driver core: class: mark the struct class for sysfs callbacks as constant
struct class should never be modified in a sysfs callback as there is nothing in the structure to modify, and frankly, the structure is almost never used in a sysfs callback, so mark it as constant to allow struct class to be moved to read-only memory. While we are touching all class sysfs callbacks also mark the attribute as constant as it can not be modified. The bonding code still uses this structure so it can not be removed from the function callbacks. Cc: "David S. Miller" <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steve French <sfrench@samba.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-cifs@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: netdev@vger.kernel.org Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230325084537.3622280-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Tony Krowiak
|
8f8cf76758 |
s390/vfio-ap: fix memory leak in vfio_ap device driver
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes:
|
||
|
Lizhe
|
85206bf953 |
s390/vfio-ap: remove redundant driver match function
If there is no driver match function, the driver core assumes that each candidate pair (driver, device) matches, see driver_match_device(). Drop the matrix bus's match function that always returned 1 and so implements the same behaviour as when there is no match function Signed-off-by: Lizhe <sensor1010@163.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Link: https://lore.kernel.org/r/20230319041941.259830-1-sensor1010@163.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Bart Van Assche
|
2887b7a8e0 |
scsi: zfcp: Declare SCSI host template const
Make it explicit that the SCSI host template is not modified. Acked-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-9-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Cai Huoqing
|
c85bd3dacc |
net/ism: Remove redundant pci_clear_master
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Greg Kroah-Hartman
|
75cff725d9 |
driver core: bus: mark the struct bus_type for sysfs callbacks as constant
struct bus_type should never be modified in a sysfs callback as there is nothing in the structure to modify, and frankly, the structure is almost never used in a sysfs callback, so mark it as constant to allow struct bus_type to be moved to read-only memory. Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hu Haowen <src.res@email.cn> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl Reviewed-by: Alex Shi <alexs@kernel.org> Acked-by: Iwona Winiarska <iwona.winiarska@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Harald Freudenberger
|
038c5bedbc |
s390/ap: add ap status asynch error support
Review and extend the low level AP code to be able to deal with asynchronous reported errors on APQNs. The hypervisor and the SE guest may be confronted with an asynchronously reported error at return of an AP instruction. So all places where AP instructions are called need review and may eventually need extensions. However, not all places need rework. As together with the AP status and the enabled asynch bit there is always a response code set. The asynch error reporting comes with new response codes which may be simple handled in the default case of a switch statement. The idea behind this patch is to report asynch errors as -EPERM (read this as "Operation not permitted") which reflects the fact that only a rapq (with F bit enabled) is a valid AP instruction when an asynch error is flagged. The AP queue state machine functions return AP_SM_WAIT_NONE when a asynch error is detected to reflect the fact, that the state machine can't do anything with such an error as long as the queue is reset. Unfortunately the ap bus scan function needed some update as the ap_queue_info() now needs to return 3 states: 1 if an APQN exists and info is available, -1 if it is assumed an APQN does not exist and the new return value 0 without any info values filled. This 0 returncode is handled as "there is an APQN but we currently don't know any more hw info about this, so please use your previous info and try again later". Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
2d72eaf036 |
s390/ap: implement SE AP bind, unbind and associate
Implementation of the new functions for SE AP support: bind, unbind and associate. There are two new sysfs attributes for this: /sys/devices/ap/cardxx/xx.yyyy/se_bind /sys/devices/ap/cardxx/xx.yyyy/se_associate Writing a 1 into the se_bind attribute triggers the SE AP bind for this AP queue, writing a 0 into does an unbind - that's a reset (RAPQ) with the F bit enabled. The se_associate attribute needs an integer value in range 0...2^16-1 written in. This is the index into a secrets table feed into the ultravisor. For more details please see the Architecture documents. These both new ap queue attributes are only visible inside a SE guest with SB (Secure Binding) available. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
263c8454db |
s390/ap: introduce low frequency polling possibility
For some events the ap bus needs to poll. For example when an AP queue is reset until the reset is through. Also when no interrupt support is available (e.g. zVM) there is a need to poll until all requests have been processed and all replies have been delivered. Polling is done with a high resolution timer by default run with a rate of 4kHz (LPAR) or 666Hz (zVM guest). For some events (wait for reset complete, wait for irq enabled complete) this is a much too high poll rate which triggers a lot of TAPQ invocations. This patch introduces the possibility for the state machine functions to return a new wait enum AP_SM_WAIT_LOW_TIMEOUT which gives a hint to the ap_wait() function to eventually set up the timer with a more relaxed timeout value of 25Hz. This patch also includes a slight rework of the sysfs functions parsing the timer related stuff: Use of kstrtobool and kstrtoul instead of sscanf. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
4bdf3c3956 |
s390/ap: provide F bit parameter for ap_rapq() and ap_zapq()
Extent the ap inline functions ap_rapq() (calls PQAP(RAPQ)) and ap_zapq() (calls PQAP(ZAPQ)) with a new parameter to enable the new architectured F bit which forces an unassociate and/or unbind on a secure execution associated and/or bound queue. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
088174960e |
s390/ap: filter ap card functions, new queue functions attribute
With SE SB (Secure Binding) some currently unused and thus always zero bits in the TAPQ GR2 result are now used to show the binding state of a queue. So to check if a card has changed the comparing base is exactly this GR2 value shown as 'ap_function' in sysfs (/sys/devices/ap/cardxx/ap_functions). Now there is some queue specific info in this info and so a new mask TAPQ_CARD_FUNC_CMP_MASK is used to filter out only the relevant bits for card compare. For the same reason now the function bits (including exactly this bind/associate information) need to be exposed to user space now. So tools like lszcrypt can evaluate binding/association state on a queue base. So here comes a new sysfs attribute /sys/devices/ap/cardxx/xx.yyyy/ap_functions This sysfs attribute is similar to the already existing ap_functions attribute at ap card level. It shows the upper 32 bits of GR2 from an invocation of TAPQ for this AP queue. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
211c06d845 |
s390/ap: make tapq gr2 response a struct
This patch introduces a new struct ap_tapq_gr2 which covers the response in GR2 on TAPQ invocation. This makes it much easier and less error-prone for the calling functions to access the right field without shifting and masking. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
d7b1813af6 |
s390/ap: introduce new AP bus sysfs attribute features
Introduce a new AP bus sysfs attribute /sys/bus/ap/features which shows the features from the QCI information. Currently these feature bits are evaluated: - QCI S bit is shown as 'APSC' - QCI N bit is shown as 'APXA' - QCI C bit is shown as 'QACT' - QCI R bit is shown as 'RC8A' - QCI B bit is shown as 'APSB' Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
f604704021 |
s390/ap: exploit new B bit from QCI config info
This patch introduces an update to the ap_config_info struct which is filled with the QCI subfunction. There is a new bit apsb (short 'B') showing if the AP secure bind facility is available. The patch also includes a simple function ap_sb_available() wrapping this bit test. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
964d581daf |
s390/zcrypt: replace scnprintf with sysfs_emit
Replace scnprintf() with sysfs_emit() and friends where possible. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
8794c59613 |
s390/zcrypt: rework length information for dqap
The inline ap_dqap function does not return the number of bytes actually written into the message buffer. The calling code inspects the AP message header to figure out what kind of AP message has been received and pulls the length information from this header. This processing may not work correctly in cases where only a fragment of the reply is received. With this patch the ap_dqap inline function now returns the number of actually written bytes in the *length parameter. So the calling function has a chance to compare the number of received bytes against what the AP message header length field states. This is especially useful in cases where a message could only get partially received. The low level reply processing functions needed some rework to be able to catch this new length information and compare it the right way. The rework also deals with some situations where until now the reply length was not correctly calculated and/or set. All this has been heavily tested as the modifications on the reply length information may affect crypto load. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
003d248fee |
s390/zcrypt: make psmid unsigned long instead of long long
Since s390 kernel build does not support 32 bit build any more there is no difference between long and long long. So this patch reworks all occurrences of psmid (a 64 bit value) to use unsigned long now. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Heiko Carstens
|
e5323477e6 |
Merge branch 'decompressor-memory-tracking' into features
Vasily Gorbik says: =================== Combine and generalize all methods for finding unused memory in decompressor, while decreasing complexity, add memory holes support, while improving error handling (especially in low-memory conditions) and debug-ability. =================== Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Vasily Gorbik
|
8c37cb7d4f |
s390/boot: rename mem_detect to physmem_info
In preparation to extending mem_detect with additional information like reserved ranges rename it to more generic physmem_info. This new naming also help to avoid confusion by using more exact terms like "physmem online ranges", etc. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Greg Kroah-Hartman
|
1aaba11da9 |
driver core: class: remove module * from class_create()
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Stefan Raspl
|
298c91dc40 |
net/ism: Remove extra include
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Stefan Raspl
|
f947568e25 |
net/smc: Introduce explicit check for v2 support
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Yu Zhe
|
72c2112ce9 |
s390/zcrypt: remove unnecessary (void *) conversions
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20230303052155.21072-1-yuzhe@nfschina.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Linus Torvalds
|
06caa75154 |
SCSI misc on 20230303
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
|
||
|
Linus Torvalds
|
0bdf4a8bf0 |
s390 updates for 6.3 merge window part 2
- Add empty command line parameter handling stubs to kernel for all command line parameters which are handled in the decompressor. This avoids invalid "Unknown kernel command line parameters" messages from the kernel, and also avoids that these will be incorrectly passed to user space. This caused already confusion, therefore add the empty stubs - Add missing phys_to_virt() handling to machine check handler - Introduce and use a union to be used for zcrypt inline assemblies. This makes sure that only a register wide member of the union is passed as input and output parameter to inline assemblies, while usual C code uses other members of the union to access bit fields of it - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to atomically read a 128-bit value from memory. This replaces the (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf code. Currently gcc does not generate the used lpq instruction if __READ_ONCE() is used for aligned 128-bit accesses, therefore use this s390 specific helper - Simplify machine check handler code if a task needs to be killed because of e.g. register corruption due to a machine malfunction - Perform CPU reset to clear pending interrupts and TLB entries on an already stopped target CPU before delegating work to it - Generate arch/s390/boot/vmlinux.map link map for the decompressor, when CONFIG_VMLINUX_MAP is enabled for debugging purposes - Fix segment type handling for dcssblk devices. It incorrectly always returned type "READ/WRITE" even for read-only segements, which can result in a kernel panic if somebody tries to write to a read-only device - Sort config S390 select list again - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit test -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmQB5LgACgkQIg7DeRsp bsLvPRAAojiU7uZTDKL58Ta67D7gyWWZa6ClI7MHrtEwEM70cOZHmOYToFuyapbT Af+PBg8YcqDDHxGf+HNuxnYRI4y2hGJUyjURZmGuCzPPJ5IGvy+8/X0d0wsvclqC fWeTtVvZIxdu5NdBQTs1iMCCxPXg9OfGDVCU+P/pnrlKskHorA6a2ZWGdkpae3fj kd1pgLLcZq0Jf8+Q6bSLBZjm45R/Q+qEpd8eIOncP7xrQTpLPkLxRSrnZLPtYdLu 7uUDtzEC63x7/0Weri71ZQqbc22CzHNiF6FZj5sm78KsWmparmUUsns/U5CrEO4J e85/kPXjgfvwMZdQCXSPHZJ8CGTRzN6Zl/Lym9W5+9X6cgb1WNVNCATGZIG3HueA MYnXmLkmNmaEgsckcYbCVPR9SjIwVibIL+/32hH63oUnc8WnrbVlai/G57j0dRUg +kxVvwbxaDyesRbF7XKe4PssYZJxpO+QFIhnvo6EEghUuc32o+WVNqjoU04/VBaa i2FtbARGDWWs5+EwS9td/xHiFPQHpFCJHrMbxacEQmtDbOTOhoLbxNlP17YfQ2oD ch0QCZ1w0VwE9ehMRLmZQCem51n7aPt11tKOEFKsck4Mb1dXVLW9LWwNpjIBXrIo 2g4U4Ytj2I9HbxWMJmKmLsP4NHn2oG3A+uGUkSWf/wdDTfylB30= =zZId -----END PGP SIGNATURE----- Merge tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - Add empty command line parameter handling stubs to kernel for all command line parameters which are handled in the decompressor. This avoids invalid "Unknown kernel command line parameters" messages from the kernel, and also avoids that these will be incorrectly passed to user space. This caused already confusion, therefore add the empty stubs - Add missing phys_to_virt() handling to machine check handler - Introduce and use a union to be used for zcrypt inline assemblies. This makes sure that only a register wide member of the union is passed as input and output parameter to inline assemblies, while usual C code uses other members of the union to access bit fields of it - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to atomically read a 128-bit value from memory. This replaces the (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf code. Currently gcc does not generate the used lpq instruction if __READ_ONCE() is used for aligned 128-bit accesses, therefore use this s390 specific helper - Simplify machine check handler code if a task needs to be killed because of e.g. register corruption due to a machine malfunction - Perform CPU reset to clear pending interrupts and TLB entries on an already stopped target CPU before delegating work to it - Generate arch/s390/boot/vmlinux.map link map for the decompressor, when CONFIG_VMLINUX_MAP is enabled for debugging purposes - Fix segment type handling for dcssblk devices. It incorrectly always returned type "READ/WRITE" even for read-only segements, which can result in a kernel panic if somebody tries to write to a read-only device - Sort config S390 select list again - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit test * tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kprobes: fix current_kprobe never cleared after kprobes reenter s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler s390/Kconfig: sort config S390 select list again s390/extmem: return correct segment type in __segment_load() s390/decompressor: add link map saving s390/smp: perform cpu reset before delegating work to target cpu s390/mcck: cleanup user process termination path s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg s390/rwonce: add READ_ONCE_ALIGNED_128() macro s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union s390/nmi: fix virtual-physical address confusion s390/setup: do not complain about parameters handled in decompressor |
||
|
Harald Freudenberger
|
ebf95e8846 |
s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
Introduce a new ap queue status register wrapper union to access register wide values. So the inline assembler only sees register wide values but the surrounding code may use a more structured view of the same value and a reader of the code (and the compiler) gets a clear understanding about the mapping between fields and register values. All the changes to access the ap queue status are local to the inline functions within ap.h. However, the struct ap_qirq_ctrl has been replaces by a union for same reason and this needed slight adaptions in the calling code. Suggested-by: Halil Pasic <pasic@linux.ibm.com> Suggested-by: Andreas Arnez <arnez@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Linus Torvalds
|
49d5759268 |
ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|