Coverity reports an uninit pointer read in qed_mcp_nvm_info_populate().
If EOPNOTSUPP is returned from qed_mcp_bist_nvm_get_num_images() ensure
nvm_info.num_images is set to 0 to avoid possible uninit assignment
to p_hwfn->nvm_info.image_att later on in out label.
Closes: https://scan5.scan.coverity.com/#/project-view/63204/10063?selectedIssue=1636666
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241215011733.351325-2-gianf.trad@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The OF node obtained by of_parse_phandle() is not freed. Call
of_node_put() to balance the refcount.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 1676aba5ef ("net: ethernet: bgmac: device tree phy enablement")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Parthiban Veerasooran says:
====================
Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
This patch series contain the below fixes.
- Infinite loop error when tx credits becomes 0.
- Race condition between tx skb reference pointers.
v2:
- Added mutex lock to protect tx skb reference handling.
v3:
- Added mutex protection in assigning new tx skb to waiting_tx_skb
pointer.
- Explained the possible scenario for the race condition with the time
diagram in the commit message.
v4:
- Replaced mutex with spin_lock_bh() variants as the start_xmit runs in
BH/softirq context which can't take sleeping locks.
====================
Link: https://patch.msgid.link/20241213123159.439739-1-parthiban.veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The alias symbol name was renamed. Adjust module_phy_driver macro to
create the proper symbol name to fix module autoloading.
Fixes: 054a9cd395 ("modpost: rename alias symbol for MODULE_DEVICE_TABLE()")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20241212130015.238863-1-fujita.tomonori@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a089439478 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
netdev: fix repeated netlink messages in queue dumps
Fix dump continuation for queues and queue stats in the netdev family.
Because we used post-increment when saving id of dumped queue next
skb would re-dump the already dumped queue.
====================
Link: https://patch.msgid.link/20241213152244.3080955-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da7 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangguan Wang says:
====================
net: several fixes for smc
v1 -> v2:
rewrite patch #2 suggested by Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccaf ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a2 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20,
but was 0000000000000000
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014
Workqueue: events smc_link_down_work [smc]
RIP: 0010:__list_del_entry_valid.cold+0x31/0x47
RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086
RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000
RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38
R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002
R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0
FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
rwsem_down_write_slowpath+0x17e/0x470
smc_link_down_work+0x3c/0x60 [smc]
process_one_work+0x1ac/0x350
worker_thread+0x49/0x2f0
? rescuer_thread+0x360/0x360
kthread+0x118/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x1f/0x30
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth: stmmac: fix TSO DMA API mis-usage causing oops
- eth: bnxt_en: fixes for HW GRO: GSO type on 5750X chips and
oops due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply
not supported
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TDKt
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
-----BEGIN PGP SIGNATURE-----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=1Po/
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit changed the dsa_8021q_rcv() calling convention to
accept pre-populated source_port and switch_id arguments. If those are
not available, as in the case of tag_ocelot_8021q, the arguments must be
pre-initialized with -1.
Due to the bug of passing uninitialized arguments in tag_ocelot_8021q,
dsa_8021q_rcv() does not detect that it needs to populate the
source_port and switch_id, and this makes dsa_conduit_find_user() fail,
which leads to packet loss on reception.
Fixes: dcfe767378 ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8d7ae22ae9 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.
The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9896 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Fixes: 5c844d57aa ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.
Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This updates iso_sock_accept to use nested locking for the parent
socket, to avoid lockdep warnings caused because the parent and
child sockets are locked by the same thread:
[ 41.585683] ============================================
[ 41.585688] WARNING: possible recursive locking detected
[ 41.585694] 6.12.0-rc6+ #22 Not tainted
[ 41.585701] --------------------------------------------
[ 41.585705] iso-tester/3139 is trying to acquire lock:
[ 41.585711] ffff988b29530a58 (sk_lock-AF_BLUETOOTH)
at: bt_accept_dequeue+0xe3/0x280 [bluetooth]
[ 41.585905]
but task is already holding lock:
[ 41.585909] ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
[ 41.586064]
other info that might help us debug this:
[ 41.586069] Possible unsafe locking scenario:
[ 41.586072] CPU0
[ 41.586076] ----
[ 41.586079] lock(sk_lock-AF_BLUETOOTH);
[ 41.586086] lock(sk_lock-AF_BLUETOOTH);
[ 41.586093]
*** DEADLOCK ***
[ 41.586097] May be due to missing lock nesting notation
[ 41.586101] 1 lock held by iso-tester/3139:
[ 41.586107] #0: ffff988b29533a58 (sk_lock-AF_BLUETOOTH)
at: iso_sock_accept+0x61/0x2d0 [bluetooth]
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_get_route holds the device before returning, the hdev
should be released with hci_dev_put at the end of iso_listen_bis
even if the function returns with an error.
Fixes: 02171da6e8 ("Bluetooth: ISO: Add hcon for listening bis sk")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock();
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=JEfQ
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES
in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL &
NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similarly as with bonding, fix the calculation of vlan_features to reuse
netdev_base_features() in order derive the set in the same way as
ndo_fix_features before iterating through the slave devices to refine the
feature set.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers like mlx5 expose NIC's vlan_features such as
NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are
later not propagated when the underlying devices are bonded and
a vlan device created on top of the bond.
Right now, the more cumbersome workaround for this is to create
the vlan on top of the mlx5 and then enslave the vlan devices
to a bond.
To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES
such that bond_compute_features() can probe and propagate the
vlan_features from the slave devices up to the vlan device.
Given the following bond:
# ethtool -i enp2s0f{0,1}np{0,1}
driver: mlx5_core
[...]
# ethtool -k enp2s0f0np0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k enp2s0f1np1 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k bond0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Before:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: off [requested on]
tx-udp_tnl-csum-segmentation: off [requested on]
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
After:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Various users have run into this reporting performance issues when
configuring Cilium in vxlan tunneling mode and having the combination
of bond & vlan for the core devices connecting the Kubernetes cluster
to the outside world.
Fixes: a9b3ace44c ("bonding: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a bonding device has slave devices, then the current logic to derive
the feature set for the master bond device is limited in that flags which
are fully supported by the underlying slave devices cannot be propagated
up to vlan devices which sit on top of bond devices. Instead, these get
blindly masked out via current NETIF_F_ALL_FOR_ALL logic.
vlan_features and mpls_features should reuse netdev_base_features() in
order derive the set in the same way as ndo_fix_features before iterating
through the slave devices to refine the feature set.
Fixes: a9b3ace44c ("bonding: fix vlan_features computing")
Fixes: 2e770b507c ("net: bonding: Inherit MPLS features from slave devices")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().
Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
