This splits bch2_btree_iter() up into two functions: an inner function
that handles BTREE_ITER_WITH_JOURNAL, BTREE_ITER_WITH_UPDATES, and
iterating acrcoss leaf nodes, and an outer one that implements
BTREE_ITER_FILTER_SNAPHSOTS.
This is prep work for remember a btree_path at our update position in
BTREE_ITER_FILTER_SNAPSHOTS mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Symbol decoding, via %ps, isn't supported in userspace - this will also
be faster when we're using trans->fn in the fast path, as with the new
BCH_JSET_ENTRY_log journal messages.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a flag to not mark the initial btree_path as preserve, for
paths that we expect to be cheap to reconstitute if necessary - this
solves a btree_path overflow caused by need_whiteout_for_snapshot().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reading from cached data, which calls bch2_bucket_io_time_reset(), is
leading to transaction iterator overflows - this standardizes the
workaround.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new assertion to be used by bch2_inode_update_after_write(),
which updates the VFS inode based on the update to the btree inode we
just did - we require that the btree inode still be locked when we do
that update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- We should only be clearing should_be_locked in btree_path_set_pos() -
it's the responsiblity of the btree_path code, not the btree_iter
code.
- bch2_path_put() needs to pay attention to path->should_be_locked, to
ensure we don't drop locks we're supposed to be keeping.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The bch2_btree_path_upgrade() call was failing and tripping an assert -
path->level + 1 is in this case not necessarily exactly what we want,
fix it by upgrading exactly the locks we want.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
for_each_btree_key() now calls bch2_trans_begin() as needed; that means,
we can also call it when we're in danger of overflowing transaction
paths.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
But we don't need to call it from outside the btree iterator code
anymore, since it's called by bch2_trans_begin() and
bch2_btree_path_traverse().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Code that uses for_each_btree_key often wants transaction restarts to be
handled locally and not returned. Originally, we wouldn't return
transaction restarts if there was a single iterator in the transaction -
the reasoning being if there weren't other iterators being invalidated,
and the current iterator was being advanced/retraversed, there weren't
any locks or iterators we were required to preserve.
But with the btree_path conversion that approach doesn't work anymore -
even when we're using for_each_btree_key() with a single iterator there
will still be two paths in the transaction, since we now always preserve
the path at the pos the iterator was initialized at - the reason being
that on restart we often restart from the same place.
And it turns out there's now a lot of for_each_btree_key() uses that _do
not_ want transaction restarts handled locally, and should be returning
them.
This patch splits out for_each_btree_key_norestart() and
for_each_btree_key_continue_norestart(), and converts existing users as
appropriate. for_each_btree_key(), for_each_btree_key_continue(), and
for_each_btree_node() now handle transaction restarts themselves by
calling bch2_trans_begin() when necessary - and the old hack to not
return transaction restarts when there's a single path in the
transaction has been deleted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that peek_node()/next_node() are converted to return errors
directly, we don't need bch2_trans_exit() to return errors - it's
cleaner this way and wasn't used much anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes for_each_btree_node() to work like for_each_btree_key(),
and to that end bch2_btree_iter_peek_node() and next_node() also return
error ptrs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
For snapshots, we need to implement btree lookups that return the first
key that's an ancestor of the snapshot ID the lookup is being done in -
and filter out keys in unrelated snapshots. This patch adds the btree
iterator flag BTREE_ITER_FILTER_SNAPSHOTS which does that filtering.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch significantly reduces the number of btree lookups required in
the extent update path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
New rule is: if a btree path holds any locks it should be holding
precisely the locks wanted (accoringing to path->level and
path->locks_want).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
btree_path_traverse_all() traverses btree iterators in sorted order, and
thus shouldn't see transaction restarts due to potential deadlocks - but
sometimes we do. This patch adds some more assertions and tracks some
more state to help track this down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was used for an optimization that hasn't existing in quite awhile
- iter->uptodate will probably be going away as well.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
These utility functions are for managing btree node state within a
btree_trans - rename them for consistency, and drop some unneeded
arguments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is prep work for splitting btree_path out from btree_iter -
btree_path will not have a pointer to btree_trans.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This factors out bch2_dump_trans_iters_updates() from the iter alloc
overflow path, and makes some small improvements to what it prints.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This will be used to make other operations on btree iterators within a
transaction more efficient, and enable some other improvements to how we
manage btree iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Start tracking when btree transactions have been restarted - and assert
that we're always calling bch2_trans_begin() immediately after
transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Btree node merging now happens prior to transaction commit, not after,
so we don't need to pay attention to BTREE_INSERT_NOUNLOCK.
Also, foreground_maybe_merge shouldn't be calling
bch2_btree_iter_traverse_all() - this is becoming private to the btree
iterator code and should only be called by bch2_trans_begin().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new helper for btree_cache.c that does what we want where
the iterator is still being traverse - and also eliminates some
unnecessary transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This closes a significant hole (and last known hole) in our ability to
verify metadata. Previously, since btree nodes are log structured, we
couldn't detect lost btree writes that weren't the first write to a
given node. Additionally, this seems to have lead to some significant
metadata corruption on multi device filesystems with metadata
replication: since a write may have made it to one device and not
another, if we read that btree node back from the replica that did have
that write and started appending after that point, the other replica
would have a gap in the bset entries and reading from that replica
wouldn't find the rest of the bsets.
But, since updates to interior btree nodes are now journalled, we can
close this hole by updating pointers to btree nodes after every write
with the currently written number of sectors, without negatively
affecting performance. This means we will always detect lost or corrupt
metadata - it also means that our btree is now a curious hybrid of COW
and non COW btrees, with all the benefits of both (excluding
complexity).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We weren't correctly verifying that we had interior node intent locks -
this patch also fixes bugs uncovered by the new assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add basic kernel docs for bch2_trans_reset and bch2_trans_begin.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Adding iter->should_be_locked introduced a regression where it ended up
not being set on the iterator passed to bch2_btree_update_start(), which
is definitely not what we want.
This patch requires it to be set when calling bch2_trans_update(), and
adds various fixups to make that happen.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This drops bch2_btree_iter_peek_with_updates() and replaces it with a
new flag, BTREE_ITER_WITH_UPDATES, and also reworks
bch2_btree_iter_peek_slot() to respect it too.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds the ability for btree iterators to own child iterators - to be
used by an upcoming rework of bch2_btree_iter_peek_slot(), so we can
scan forwards while maintaining our current position.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add a field to struct btree_iter for tracking whether it should be
locked - this fixes spurious transaction restarts in
bch2_trans_relock().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch adds some new tracepoints to the btree iterator code, and
adds new fields to the existing tracepoints - primarily for the iterator
position.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
By changing it to upgrade iterators to intent locks to avoid lock
restarts we can simplify __bch2_btree_node_lock() quite a bit - this
fixes a probable bug where it could potentially drop a lock on an
unrelated error but still succeed instead of causing a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
gcc is emitting rep stos here, which is silly (and slow) for an 8 byte
memset.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Eventually BTREE_ITER_NODES should be going away. This patch is to fix a
transaction iterator overflow in the btree node merge path because
BTREE_ITER_NODES iterators couldn't be reused.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we're no longer doing btree node merging post commit, we can now
delete a bunch of code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we pass BTREE_INSERT_NOUNLOCK bch2_trans_commit isn't supposed to
unlock after a successful commit, but it was calling
bch2_trans_cond_resched() - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
External (to the btree iterator code) users of bch2_btree_iter_traverse
expect that on success the iterator will be pointed at iter->pos and
have that position locked - but since we split iter->pos and
iter->real_pos, that means it has to update iter->real_pos if necessary.
Internal users don't expect it to modify iter->real_pos, so we need two
separate functions.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
peek() has to update iter->real_pos - there's no need for
bch2_btree_iter_set_pos() to update it as well.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The way btree iterators work internally has been changing, particularly
with the iter->real_pos changes, and bch2_btree_iter_next() is no longer
hyper optimized - it's just advance followed by peek, so it's more
efficient to just call advance where we're not using the return value of
bch2_btree_iter_next().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is a bit clearer than using bch2_btree_iter_free().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Change fsck code to always put btree iterators - also, make some flow
control improvements to deal with lock restarts better, and refactor
check_extents() to not walk extents twice for counting/checking
i_sectors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
