On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241015164732.4085249-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The RZ/G3S supports deep sleep states where power to most of the IP blocks
is cut off. To ensure proper working of the watchdog when resuming from
such states, the suspend function is stopping the watchdog and the resume
function is starting it. There is no need to configure the watchdog
in case the watchdog was stopped prior to starting suspend.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-9-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The reset driver has been adapted in commit da235d2fac
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
devm_add_action_or_reset() could return -ENOMEM or zero. Thus, remove
comparison with zero of the returning value to make code simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
There is no need to de-assert the reset signal on probe as the watchdog
is not used prior executing start. Also, the clocks are not enabled in
probe (pm_runtime_enable() doesn't do that), thus this is another indicator
that the watchdog wasn't used previously like this. Instead, keep the
watchdog hardware in its previous state at probe (by default it is in
reset state), enable it when it is started and move it to reset state
when it is stopped. This saves some extra power when the watchdog is
unused.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
pm_runtime_put() may return an error code. Check its return status.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_stop() to its caller.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_start() to its caller.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230726233302.3812749-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
As per section 48.4 of the HW User Manual, IPs in the RZ/V2M
SoC need either a TYPE-A reset sequence or a TYPE-B reset
sequence. More specifically, the watchdog IP needs a TYPE-B
reset sequence.
If the proper reset sequence isn't implemented, then resetting
IPs may lead to undesired behaviour. In the restart callback of
the watchdog driver the reset has basically no effect on the
desired funcionality, as the register writes following the reset
happen before the IP manages to come out of reset.
Implement the TYPE-B reset sequence in the watchdog driver to
address the issues with the restart callback on RZ/V2M.
Fixes: ec122fd94e ("watchdog: rzg2l_wdt: Add rzv2m support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221117114907.138583-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On RZ/Five SoC it was observed that setting timeout (to say 1 sec) wouldn't
reset the system.
The procedure described in the HW manual (Procedure for Activating Modules)
for activating the target module states we need to start supply of the
clock module before applying the reset signal. This patch makes sure we
follow the same procedure to clear the registers of the WDT module, fixing
the issues seen on RZ/Five SoC.
While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has
the same function calls.
Fixes: 4055ee8100 ("watchdog: rzg2l_wdt: Add set_timeout callback")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20221117114907.138583-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The WDT on RZ/V2M devices is basically the same as RZ/G2L, but without
the parity error registers. This means the driver has to reset the
hardware plus set the minimum timeout in order to do a restart and has
a single interrupt.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220823093233.8577-3-phil.edworthy@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This patch adds support for set_timeout callback.
Once WDT is started, the WDT cycle setting register(WDTSET) can be updated
only after issuing a module reset. Otherwise, it will ignore the writes
and will hold the previous value. This patch updates the WDTSET register
if it is active.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-8-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This patch uses the force reset(WDTRSTB) for triggering WDT reset for
restart callback. This method(ie, Generate Reset (WDTRSTB) Signal on
parity error)is faster compared to the overflow method for triggering
watchdog reset.
Overflow method:
reboot: Restarting system
Reboot failed -- System halted
NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c
Parity error method:
reboot: Restarting system
NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-7-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If reset_control_deassert() fails, then we won't be able to
access the device registers. Therefore check the return code of
reset_control_deassert() and bailout in case of error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-6-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls reset_control_
deassert() which results in a reset control imbalance.
This patch fixes reset control imbalance by removing reset_control_
deassert() from rzg2l_wdt_start() and replaces reset_control_assert with
reset_control_reset in rzg2l_wdt_stop() as watchdog module can be stopped
only by a module reset. This change will allow us to restart WDT after
stop() by configuring WDT timeout and enable registers.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-5-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls pm_runtime_get() which
results in a usage counter imbalance. This patch fixes this issue by
removing pm_runtime_get() call from probe.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The value of timer_cycle_us can be 0 due to 32bit overflow.
For eg:- If we assign the counter value "0xfff" for computing
maxval.
This patch fixes this issue by appending ULL to 1024, so that
it is promoted to 64bit.
This patch also fixes the warning message, 'watchdog: Invalid min and
max timeout values, resetting to 0!'.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220225175320.11041-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add Watchdog Timer driver for RZ/G2L SoC.
WDT IP block supports normal watchdog timer function and reset
request function due to CPU parity error.
This driver currently supports normal watchdog timer function
and later will add support for reset request function due to
CPU parity error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
