Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylNFgCfRDpMVRjtAhrrdlTJaQRSXqd2vKAAn3Z08ggH
pvXxXEAF4NfSfuWcRehT
=kJts
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
mei: allow map and unmap of client dma buffer only for disconnected client
MAINTAINERS: Add linux-phy list and patchwork
interconnect: Fix kerneldoc warning
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Steve Royer has moved on to a different project and has asked
that Ritu and I take over maintainership of the IBM Power
Virtual Management Channel Driver.
Signed-off-by: Brad Warrum <bwarrum@linux.ibm.com>
Acked-by: Steven Royer <seroyer@linux.ibm.com>
Link: https://lore.kernel.org/r/20210330212238.2747-1-bwarrum@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Hu(Xavier) has left Hisilicon and his email address is invalid now.
I'd be glad to add him back with another address if he wants to continue
maintain this module.
Link: https://lore.kernel.org/r/1617007584-39842-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Danil will step down, Haris will take over. Also update to email address
to ionos.com, cloud.ionos.com will still work for sometime.
Link: https://lore.kernel.org/r/20210325153308.1214057-2-gi-oh.kim@ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Acked-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver supports SPI Controller for HiSilicon Kunpeng SoCs. This
driver supports SPI operations using FIFO mode of transfer.
DMA is not supported, and we just use IRQ mode for operation completion
notification.
Only ACPI firmware is supported.
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1616836200-45827-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBkoFEACgkQJNaLcl1U
h9BqTgf5AUfR5NbQgJIUMtdMsuz+bthKGuPnpYhYzNUH0io9i3Sjpt0Mbw21dLp2
nXW+70BH0tJZBGR4DNGpmcpBLH5WPdOR9WIv4vCYy9Pr0uCGGKF/JkGeZAg7/llF
C3+yDfTnF0AvR+74xbf/LTjBPGja/08PED1ZC00NAkLhE3C0Pa/VQ0NaEtPUULWE
ZOWboF7hfQUeGzGPTqNp4Cy0/Pzokk6Fvl4kgfrxjNWO7ojIv9mCAvmYbusLW7NU
3Ph5VGsIuyMeorEoAVOFaBY2nrYG/mFZyzTNWJMgvF1MdeigMPNfbbffrUK0sn6k
e81zgWbwxboEujQ91/EZU7glIqtb6A==
=rr4V
-----END PGP SIGNATURE-----
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Julien's bandwidth for KVM reviewing has been pretty low lately,
and Alexandru has accepted to step in and help with the reviewing.
Many thanks to both!
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210331131620.4005931-1-maz@kernel.org
- fix incorrect initialization and update of vdso data pages, which
results in incorrect tod clock steering, and that
clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values.
- update MAINTAINERS for s390 vfio drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmBjXH8ACgkQIg7DeRsp
bsLSWg//QhUiFdeUvyMoUxUj7Pld5/VPwAdVyuYbWlaiAwzHQwdhSCEXQ0CoIJm2
TWKpDA768KjYI8RowS+WxjGtGgDFtagtwAUm9UveiCuV4QJ5Zt/n+IRoXlUuwZWG
9mjx2UcUHxPFGJ7WtAR5VI1MLxZDHeEHVjLh7bOugO/7388CZr4TnCoIJZRXk1sh
m8WLr5gavBmYTA2PrmayuOkxOPMV56d5rRi/ZGiUYWHJJgskg+LDWcBCr4IER2am
MgeCMIpVgs2o4z6O2xCRmJeOG4Ha1JgeI0+8OhkkWmmZCo/ZMrjW4rjP8s0nSSif
PdKot7KaeDAVGCm11jv4V+YVN9HaVPFqGimNV7XuEXBZKnwh7N2yKK4qWvwRy+TJ
Y1nBMUvzGw7IEl60FYPCPUryk9KEq2qAYc77jRcRi9H7ji0X3BMYVKr/9AT3sdeJ
O7FkGSdEk7rfYzDiqRyisbT3rJKMwRy7i8sp7ap/m1qcgVbQlUSFoFNXSchF+2wP
OCQuvLOX7RNsFP9YiXcqUTgFO6JkN0UbVfwyOH/SxTf9Pyj53wEmphURGiHTZkbr
9TrjDmAU3MA52IGU9gYHLqQ9otCrDhj4H9Uuuo6IDJ3v1pVgdt87fIq3nHjOU8Si
KxVQ7V86Z3bXpHYglohWG7AfltfqkdO7FFAj7zvKgvq06zqRmtQ=
=5z4s
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- fix incorrect initialization and update of vdso data pages, which
results in incorrect tod clock steering, and that
clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values.
- update MAINTAINERS for s390 vfio drivers
* tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add backups for s390 vfio drivers
s390/vdso: fix initializing and updating of vdso_data
s390/vdso: fix tod_steering_delta type
s390/vdso: copy tod_steering_delta value to vdso_data page
The hisilicon-pcie.txt file is no longer useful since commit
c2fa6cf76d20 (PCI: dwc: hisi: Remove non-ECAM HiSilicon
hip05/hip06 driver), so delete it and remove related code in
MAINTAINERS file.
Suggested-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1617111799-109749-1-git-send-email-liudongdong3@huawei.com
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update Chandrasekar Ramakrishnan as maintainer for mcan mmio device driver as I
will be moving to a different role.
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Murphy's email address at ti.com doesn't work anymore, mails
bounce with:
| 550 Invalid recipient <dmurphy@ti.com> (#5.1.1)
For now remove all CAN related entries of Dan from the Maintainers
file.
Link: https://lore.kernel.org/r/20210228094218.40015-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a HID transport driver to support integrated HID devices on newer
Microsoft Surface models (specifically 7th-generation, i.e. Surface
Laptop 3, Surface Book 3, and later).
On those models, the internal keyboard and touchpad (as well as some
other HID devices with currently unknown function) are connected via the
generic HID subsystem (TC=0x15) of the Surface System Aggregator Module
(SSAM). This subsystem provides a generic HID transport layer, support
for which is implemented by this driver.
Co-developed-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The files in ./include/linux/soc/qcom/ are headers to the corresponding
files in ./drivers/soc/qcom/, which are assigned to ARM/QUALCOMM SUPPORT.
Possibly, the file pattern include/linux/*/qcom* intended to match this
directory and its containing files, but unfortunately, it does not.
Hence, add a file entry for this directory to ARM/QUALCOMM SUPPORT.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210327065642.11969-2-lukas.bulwahn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add MAINTAINERS entry for Qualcomm IPC Router (QRTR) driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a backup for s390 vfio-pci, an additional backup for vfio-ccw
and replace the backup for vfio-ap as Pierre is focusing on other
areas.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/1616679712-7139-1-git-send-email-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch supports the DFL drivers be written in userspace. This is
realized by exposing the userspace I/O device interfaces.
The driver now only binds the ether group feature, which has no irq. So
the irq support is not implemented yet.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1615168776-8553-2-git-send-email-yilun.xu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a UART driver for the new Broadcom 8250 based STB UART. The new
UART is backward compatible with the standard 8250, but has some
additional features. The new features include a high accuracy baud
rate clock system and DMA support.
The driver will use the new optional BAUD MUX clock to select the best
one of the four master clocks (81MHz, 108MHz, 64MHz and 48MHz) to feed
the baud rate selection logic for any requested baud rate. This allows
for more accurate BAUD rates when high speed baud rates are selected.
The driver will use the new UART DMA hardware if the UART DMA registers
are specified in Device Tree "reg" property.
The driver also sets the UPSTAT_AUTOCTS flag when hardware flow control
is enabled. This flag is needed for UARTs that don't assert a CTS
changed interrupt when CTS changes and AFE (Hardware Flow Control) is
enabled.
The driver also contains a workaround for a bug in the Synopsis 8250
core. The problem is that at high baud rates, the RX partial FIFO
timeout interrupt can occur but there is no RX data (DR not set in
the LSR register). In this case the driver will not read the Receive
Buffer Register, which clears the interrupt, and the system will get
continuous UART interrupts until the next RX character arrives. The
fix originally suggested by Synopsis was to read the Receive Buffer
Register and discard the character when the DR bit in the LSR was
not set, to clear the interrupt. The problem was that occasionally
a character would arrive just after the DR bit check and a valid
character would be discarded. The fix that was added will clear
receive interrupts to stop the interrupt, deassert RTS to insure
that no new data can arrive, wait for 1.5 character times for the
sender to react to RTS and then check for data and either do a dummy
read or a valid read. Debugfs error counters were also added and were
used to help create test software that would cause the error condition.
The counters can be found at:
/sys/kernel/debug/bcm7271-uart/<device-name>/stats
This also includes a few fixes for build warnings reported by
the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20210325185256.16156-3-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
-----BEGIN PGP SIGNATURE-----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=jeRJ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
iio: acpi_als: Add trigger support
iio: acpi_als: Add local variable dev in probe
iio: acpi_als: Add timestamp channel
iio: adc: ad7292: Modify the bool initialization assignment
iio: cros: unify hw fifo attributes without API changes
iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
iio: event_monitor: Enable events before monitoring
dt-bindings: iio: adc: Add compatible for Mediatek MT8195
iio:magnetometer: Add Support for ST IIS2MDC
dt-bindings: iio: st,st-sensors add IIS2MDC.
staging: iio: ad9832: kernel-doc fixes
iio:dac:max517.c: Use devm_iio_device_register()
iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
iio: buffer: kfifo_buf: kernel-doc, typo in function name.
iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
iio: adc: adi-axi-adc: Drop false marking for kernel-doc
iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
...
Updated to use devm_iio_kfifo_buffer_setup() in place of now
removed devm_iio_kfifo_allocate()
Take3 branch because first 2 versions including wrong version of
patch.
Add simple IRQ or GPIO base counter. This device is used to measure
rotation speed of some agricultural devices, so no high frequency on the
counter pin is expected.
The maximal measurement frequency depends on the CPU and system load. On
the idle iMX6S I was able to measure up to 20kHz without count drops.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20210301080401.22190-3-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-1-jagan@amarulasolutions.com
Add the linux-mediatek mailing list to drm Mediatek drivers
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
Add entry "L: linux-perf-users@vger.kernel.org" to archive the
related mail on https://lore.kernel.org/linux-perf-users/, add
entry "W: https://perf.wiki.kernel.org/" so that newbies could
get some useful materials.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1615780592-21838-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
systems. The driver is not regularly tested and very likely not working for
quite a long time that's why remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linux-phy subsystem gained mailing list and a patchwork instance. Add the
details to MAINTAINERS file
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210226111233.2601369-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add entries for Actions Semi Owl Ethernet MAC binding and driver.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There ended up being two sections with the same title. Combine the two
into one section.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the complexity of describing multiple hardware generations
in one document, switch to using separate dt-bindings.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
