Kernels built without CONFIG_MODULES might still want to create -dbg deb
packages but install_linux_image_dbg() assumes modules.order always
exists. This obviously isn't true if no modules were built, so we should
skip reading modules.order in that case.
Fixes: 16c36f8864 ("kbuild: deb-pkg: use build ID instead of debug link for dbg package")
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The '-fbasic-block-sections=labels' option has been deprecated in tip
of tree clang (20.0.0) [1]. While the option still works, a warning is
emitted:
clang: warning: argument '-fbasic-block-sections=labels' is deprecated, use '-fbasic-block-address-map' instead [-Wdeprecated]
Add a version check to set the proper option.
Link: https://github.com/llvm/llvm-project/pull/110039 [1]
Signed-off-by: Rong Xu <xur@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.
The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.
Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:
1) Build the kernel on the host machine, with AutoFDO and Propeller
build config
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
then
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>
“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.
2) Install the kernel on test/production machines.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
# To see if Zen3 support LBR:
$ cat proc/cpuinfo | grep " brs"
# To see if Zen4 support LBR:
$ cat proc/cpuinfo | grep amd_lbr_v2
# If the result is yes, then collect the profile using:
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) Generate Propeller profile:
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=propeller --propeller_output_module_name \
--out=<propeller_profile_prefix>_cc_profile.txt \
--propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
“create_llvm_prof” is the profile conversion tool, and a prebuilt
binary for linux can be found on
https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
from source).
"<propeller_profile_prefix>" can be something like
"/home/user/dir/any_string".
This command generates a pair of Propeller profiles:
"<propeller_profile_prefix>_cc_profile.txt" and
"<propeller_profile_prefix>_ld_profile.txt".
6) Rebuild the kernel using the AutoFDO and Propeller profile files.
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
and
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Enable the machine function split optimization for AutoFDO in Clang.
Machine function split (MFS) is a pass in the Clang compiler that
splits a function into hot and cold parts. The linker groups all
cold blocks across functions together. This decreases hot code
fragmentation and improves iCache and iTLB utilization.
MFS requires a profile so this is enabled only for the AutoFDO builds.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Enable -ffunction-sections by default for the AutoFDO build.
With -ffunction-sections, the compiler places each function in its own
section named .text.function_name instead of placing all functions in
the .text section. In the AutoFDO build, this allows the linker to
utilize profile information to reorganize functions for improved
utilization of iCache and iTLB.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Mark __kernel_entry as ".head.text" and place HEAD_TEXT before
TEXT_TEXT in the linker script. This ensures that __kernel_entry
will be placed at the beginning of text section.
Drop mips from scripts/head-object-list.txt.
Signed-off-by: Rong Xu <xur@google.com>
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Closes: https://lore.kernel.org/lkml/c6719149-8531-4174-824e-a3caf4bc6d0e@alliedtelesis.co.nz/T/
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add the build support for using Clang's AutoFDO. Building the kernel
with AutoFDO does not reduce the optimization level from the
compiler. AutoFDO uses hardware sampling to gather information about
the frequency of execution of different code paths within a binary.
This information is then used to guide the compiler's optimization
decisions, resulting in a more efficient binary. Experiments
showed that the kernel can improve up to 10% in latency.
The support requires a Clang compiler after LLVM 17. This submission
is limited to x86 platforms that support PMU features like LBR on
Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1,
and BRBE on ARM 1 is part of planned future work.
Here is an example workflow for AutoFDO kernel:
1) Build the kernel on the host machine with LLVM enabled, for example,
$ make menuconfig LLVM=1
Turn on AutoFDO build config:
CONFIG_AUTOFDO_CLANG=y
With a configuration that has LLVM enabled, use the following
command:
scripts/config -e AUTOFDO_CLANG
After getting the config, build with
$ make LLVM=1
2) Install the kernel on the test machine.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
For Zen3:
$ cat proc/cpuinfo | grep " brs"
For Zen4:
$ cat proc/cpuinfo | grep amd_lbr_v2
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) To generate an AutoFDO profile, two offline tools are available:
create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part
of the AutoFDO project and can be found on GitHub
(https://github.com/google/autofdo), version v0.30.1 or later. The
llvm_profgen tool is included in the LLVM compiler itself. It's
important to note that the version of llvm_profgen doesn't need to
match the version of Clang. It needs to be the LLVM 19 release or
later, or from the LLVM trunk.
$ llvm-profgen --kernel --binary=<vmlinux> --perfdata=<perf_file> \
-o <profile_file>
or
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=extbinary --out=<profile_file>
Note that multiple AutoFDO profile files can be merged into one via:
$ llvm-profdata merge -o <profile_file> <profile_1> ... <profile_n>
6) Rebuild the kernel using the AutoFDO profile file with the same config
as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled):
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The positional argument specifies the top-level Kconfig. Include this
information in the help message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The P_MENU entries ("menu" and "menuconfig") are never displayed in
symbolMode.
The condition, list->mode == symbolMode, is never met here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most of the code in ConfigInfoView::clicked() is unnecessary.
There is no need to use the regular expression to search for a symbol.
Calling sym_find() is simpler and faster.
The hyperlink always begins with the "s" tag, and there is no other
tag used. Remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Split out the code that retrieves the menu entry with a prompt, so it
can be reused in other functions.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The only functional tag is href="s<symbol_name>".
Commit c4f7398bee ("kconfig: qconf: make debug links work again")
changed prop->name to sym->name for this reference, but it missed to
change the tag "m" to "s".
This tag is not functional at all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the ESC key is pressed, the parentSelected() signal is currently
emitted for singleMode, menuMode, and symbolMode.
However, parentSelected() signal is functional only for singleMode.
In menuMode, the signal is connected to the goBack() slot, but nothing
occurs because configList->rootEntry is always &rootmenu.
In symbolMode (in the right pane), the parentSelected() signal is not
connected to any slot.
This commit prevents the unnecessary emission of the parentSelected()
signal.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The " (NEW)" string should be displayed regardless of the visibility
of the associated menu.
The ConfigItem::visible member is not used for any other purpose.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a menu is selected in the split view, the right pane displays the
goParent button, but it is never functional.
This is unnecessary, as you can select a menu from the menu tree in the
left pane.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit a2574c12df ("kconfig: qconf: convert to Qt5 new signal/slot
connection syntax") converted most of the old string-based connections,
but one more instance still remains. Convert it to the new style.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The default value of the quitOnLastWindowClosed property is true.
Hence, the application implicitly quits when the last window is closed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fde192511b ("kconfig: remove tristate choice support"),
choice members are always boolean. The type check is redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Replace the hand crafted lookup table with a QHash. This has the nice benefit
that the added offsets can not get out of sync with the length of the
replacement strings.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This renames "Load" to "Open" and switches Ctrl-L to Ctrl-O for the default
platforms. This may break the workflow for those used to it, but will make it
actually work for everyone else like me who would just expect the default
behavior. Add some more standard shortcuts where available. If they replace
the existing shortcuts they would have the same value in my case.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is the native type used by the file dialogs and avoids any hassle with
filename encoding when converting this back and forth to a character array.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Ignore process select warnings for config entries that have a default
option. Some config entries have no prompt, and nothing selects them, but
these config options are okay because they have a default option.
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Track default options on the second line. On the second line of some
config entries, default and dependency options sometimes appear. In those
instances, the state will be "NEW" and not "DEP".
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Put in the dollar sign for the variable '$config'. That way, the debug
message has more meaning.
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add the ability to cycle through dialog buttons with the TAB key.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The ->addWidget() method re-parents the widget. The parent QWidget can
be specified directly in the constructor.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rearrange the code to make the upcoming refactoring easier to understand.
No functional changes intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fde192511b ("kconfig: remove tristate choice support"),
all choice blocks are now boolean. There is no longer a need to specify
the choice type explicitly.
All "bool" prompts in choice entries have been converted to "prompt".
This commit removes support for the "bool" syntax in choice entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some architectures embed boot DTBs in vmlinux. A potential issue for
these architectures is a race condition during parallel builds because
Kbuild descends into arch/*/boot/dts/ twice.
One build thread is initiated by the 'dtbs' target, which is a
prerequisite of the 'all' target in the top-level Makefile:
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
For architectures that support the built-in boot dtb, arch/*/boot/dts/
is visited also during the ordinary directory traversal in order to
build obj-y objects that wrap DTBs.
Since these build threads are unaware of each other, they can run
simultaneously during parallel builds.
This commit introduces a generic build rule to scripts/Makefile.vmlinux
to support embedded boot DTBs in a race-free way. Architectures that
want to use this rule need to select CONFIG_GENERIC_BUILTIN_DTB.
After the migration, Makefiles under arch/*/boot/dts/ will be visited
only once to build only *.dtb files.
This change also aims to unify the CONFIG options used for built-in DTBs
support. Currently, different architectures use different CONFIG options
for the same purposes.
With this commit, the CONFIG options will be unified as follows:
- CONFIG_GENERIC_BUILTIN_DTB
This enables the generic rule for built-in boot DTBs. This will be
renamed to CONFIG_BUILTIN_DTB after all architectures migrate to the
generic rule.
- CONFIG_BUILTIN_DTB_NAME
This specifies the path to the embedded DTB.
(relative to arch/*/boot/dts/)
- CONFIG_BUILTIN_DTB_ALL
If this is enabled, all DTB files compiled under arch/*/boot/dts/ are
embedded into vmlinux. Only used by MIPS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
-----BEGIN PGP SIGNATURE-----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=QPqn
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
* tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host
modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness
kconfig: show sub-menu entries even if the prompt is hidden
kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profile
kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile
kbuild: rpm-pkg: disable kernel-devel package when cross-compiling
sumversion: Fix a memory leak in get_src_version()
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes: e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_SATA_AHCI_PLATFORM=m, modpost outputs incorect acpi
MODULE_ALIAS() if the endianness of the target and the build machine
do not match.
When the endianness of the target kernel and the build machine match,
the output is correct:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:010601:*");
However, when building a little-endian kernel on a big-endian machine
(or vice versa), the output is incorrect:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:0601??:*");
The 'cls' and 'cls_msk' fields are 32-bit.
DEF_FIELD() must be used instead of DEF_FIELD_ADDR() to correctly handle
endianness of these 32-bit fields.
The check 'if (cls)' was unnecessary; it never became NULL, as it was
the pointer to 'symval' plus the offset to the 'cls' field.
Fixes: 26095a01d3 ("ACPI / scan: Add support for ACPI _CLS device matching")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit f79dc03fe6 ("kconfig: refactor choice value
calculation"), when EXPERT is disabled, nothing within the "if INPUT"
... "endif" block in drivers/input/Kconfig is displayed. This issue
affects all command-line interfaces and GUI frontends.
The prompt for INPUT is hidden when EXPERT is disabled. Previously,
menu_is_visible() returned true in this case; however, it now returns
false, resulting in all sub-menu entries being skipped.
Here is a simplified test case illustrating the issue:
config A
bool "A" if X
default y
config B
bool "B"
depends on A
When X is disabled, A becomes unconfigurable and is forced to y.
B should be displayed, as its dependency is met.
This commit restores the necessary code, so menu_is_visible() functions
as it did previously.
Fixes: f79dc03fe6 ("kconfig: refactor choice value calculation")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/all/5fd0dfc7ff171aa74352e638c276069a5f2e888d.camel@proton.me/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The Debian kernel supports the pkg.linux.nokerneldbg build profile.
The debug package tends to become huge, and you may not want to build
it even when CONFIG_DEBUG_INFO is enabled.
This commit introduces a similar profile for the upstream kernel.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since commit f1d87664b8 ("kbuild: cross-compile linux-headers package
when possible"), 'make bindeb-pkg' may attempt to cross-compile the
linux-headers package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on Debian, the
following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
[ snip ]
Rebuilding host programs with aarch64-linux-gnu-gcc...
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/kallsyms
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sorttable
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/asn1_compiler
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file
In file included from /usr/include/openssl/opensslv.h:109,
from debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file.c:25:
/usr/include/openssl/macros.h:14:10: fatal error: openssl/opensslconf.h: No such file or directory
14 | #include <openssl/opensslconf.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
This commit adds a new profile, pkg.linux-upstream.nokernelheaders, to
guard the linux-headers package.
There are two options to fix the above issue.
Option 1: Set the pkg.linux-upstream.nokernelheaders build profile
$ DEB_BUILD_PROFILES=pkg.linux-upstream.nokernelheaders \
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
This skips the building of the linux-headers package.
Option 2: Install the necessary build dependencies
If you want to cross-compile the linux-headers package, you need to
install additional packages.
For example, on Debian, the packages necessary for cross-compiling it
to arm64 can be installed with the following commands:
# dpkg --add-architecture arm64
# apt update
# apt install gcc-aarch64-linux-gnu libssl-dev:arm64
Fixes: f1d87664b8 ("kbuild: cross-compile linux-headers package when possible")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/b3d4f49e-7ddb-29ba-0967-689232329b53@w6rz.net/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since commit f1d87664b8 ("kbuild: cross-compile linux-headers package
when possible"), 'make binrpm-pkg' may attempt to cross-compile the
kernel-devel package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on openSUSE
Tumbleweed, the following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-suse-linux- binrpm-pkg
[ snip ]
Rebuilding host programs with aarch64-suse-linux-gcc...
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/kallsyms
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sorttable
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/asn1_compiler
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file
/home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory
25 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
I believe this issue is less common on Fedora because the disto's cross-
compilier cannot link user-space programs. Hence, CONFIG_CC_CAN_LINK is
unset.
On Fedora 40, the package information explains this limitation clearly:
$ dnf info gcc-aarch64-linux-gnu
[ snip ]
Description : Cross-build GNU C compiler.
:
: Only building kernels is currently supported. Support for cross-building
: user space programs is not currently provided as that would massively multiply
: the number of packages.
Anyway, cross-compiling RPM packages is somewhat challenging.
This commit disables the kernel-devel package when cross-compiling
because I did not come up with a better solution.
Fixes: f1d87664b8 ("kbuild: cross-compile linux-headers package when possible")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Some old versions of `rustc` did not report the LLVM version without
the patch version, e.g.:
$ rustc --version --verbose
rustc 1.48.0 (7eac88abb 2020-11-16)
binary: rustc
commit-hash: 7eac88abb2e57e752f3302f02be5f3ce3d7adfb4
commit-date: 2020-11-16
host: x86_64-unknown-linux-gnu
release: 1.48.0
LLVM version: 11.0
Which would make the new `scripts/rustc-llvm-version.sh` fail and,
in turn, the build:
$ make LLVM=1
SYNC include/config/auto.conf.cmd
./scripts/rustc-llvm-version.sh: 13: arithmetic expression: expecting primary: "10000 * 10 + 100 * 0 + "
init/Kconfig:83: syntax error
init/Kconfig:83: invalid statement
make[3]: *** [scripts/kconfig/Makefile:85: syncconfig] Error 1
make[2]: *** [Makefile:679: syncconfig] Error 2
make[1]: *** [/home/cam/linux/Makefile:780: include/config/auto.conf.cmd] Error 2
make: *** [Makefile:224: __sub-make] Error 2
Since we do not need to support such binaries, we can avoid adding logic
for computing `rustc`'s LLVM version for those old binaries.
Thus, instead, just make the match stricter.
Other `rustc` binaries (even newer) did not report the LLVM version at
all, but that was fine, since it would not match "LLVM", e.g.:
$ rustc --version --verbose
rustc 1.49.0 (e1884a8e3 2020-12-29)
binary: rustc
commit-hash: e1884a8e3c3e813aada8254edfa120e85bf5ffca
commit-date: 2020-12-29
host: x86_64-unknown-linux-gnu
release: 1.49.0
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Gary Guo <gary@garyguo.net>
Reported-by: Cameron MacPherson <cameron.macpherson@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219423
Fixes: af0121c2d3 ("kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`")
Tested-by: Cameron MacPherson <cameron.macpherson@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241027145636.416030-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
strsep() modifies its first argument - buf.
An invalid pointer will be passed to the free() function.
Make the pointer passed to free() match the return value of
read_text_file().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9413e76405 ("kbuild: split the second line of *.mod into *.usyms")
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Each version of Rust supports a range of LLVM versions. There are cases where
we want to gate a config on the LLVM version instead of the Rust version.
Normalized cfi integer tags are one example [1].
The invocation of rustc-version is being moved from init/Kconfig to
scripts/Kconfig.include for consistency with cc-version.
Link: https://lore.kernel.org/all/20240925-cfi-norm-kasan-fix-v1-1-0328985cdf33@google.com/ [1]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20241011114040.3900487-1-gary@garyguo.net
[ Added missing `-llvm` to the Usage documentation. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix a few different compiler errors that cause rustc-option to give
wrong results.
If KBUILD_RUSTFLAGS or the flags being tested contain any -Z flags, then
the error below is generated. The RUSTC_BOOTSTRAP environment variable
is added to fix this error.
error: the option `Z` is only accepted on the nightly compiler
help: consider switching to a nightly toolchain: `rustup default nightly`
note: selecting a toolchain with `+toolchain` arguments require a rustup proxy;
see <https://rust-lang.github.io/rustup/concepts/index.html>
note: for more information about Rust's stability policy, see
<https://doc.rust-lang.org/book/appendix-07-nightly-rust.html#unstable-features>
error: 1 nightly option were parsed
Note that RUSTC_BOOTSTRAP is also defined in the top-level Makefile,
but Make-exported variables are unfortunately *not* inherited. That said,
this is changing as of commit 98da874c4303 ("[SV 10593] Export variables
to $(shell ...) commands"), which is part of Make 4.4.
The probe may also fail with the error message below. To fix it,
the /dev/null argument is replaced with a file containing the crate
attribute #![no_core]. The #![no_core] attribute ensures that rustc does
not look for the standard library. It's not possible to instead supply
a standard library (i.e. `core`) to rustc, as we need `rustc-option`
before the Rust standard library is compiled.
error[E0463]: can't find crate for `std`
|
= note: the `aarch64-unknown-none` target may not be installed
= help: consider downloading the target with `rustup target add aarch64-unknown-none`
= help: consider building the standard library from source with `cargo build -Zbuild-std`
The -o and --out-dir parameters are altered to fix this warning:
warning: ignoring --out-dir flag due to -o flag
The --sysroot flag is provided as we would otherwise require it to be
present in KBUILD_RUSTFLAGS. The --emit=obj flag is used to write the
resulting object file to /dev/null instead of writing it to a file
in $(TMPOUT).
I verified that the Kconfig version of rustc-option doesn't have the
same issues.
Fixes: c42297438a ("kbuild: rust: Define probing macros for rustc")
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241009-rustc-option-bootstrap-v3-1-5fa0d520efba@google.com
[ Reworded as discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
cc-option-yn and cc-disable-warning duplicate the compile command seen
a few lines above. These can be defined based on cc-option.
I also refactored rustc-option-yn in the same way, although there are
currently no users of it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241009102821.2675718-1-masahiroy@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:
*** buffer overflow detected ***: terminated
The buffer overflow is caused by the following line:
strcat(data, "$");
The buffer needs one more byte to accommodate the additional character.
Fixes: c4f7398bee ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
