Add a new IOMMU API interface amd_iommu_snp_disable() to transition
IOMMU pages to Hypervisor state from Reclaim state after SNP_SHUTDOWN_EX
command. Invoke this API from the CCP driver after SNP_SHUTDOWN_EX
command.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-20-michael.roth@amd.com
Currently, the expectation is that the kernel will call
amd_iommu_snp_enable() to perform various checks and set the
amd_iommu_snp_en flag that the IOMMU uses to adjust its setup routines
to account for additional requirements on hosts where SNP is enabled.
This is somewhat fragile as it relies on this call being done prior to
IOMMU setup. It is more robust to just do this automatically as part of
IOMMU initialization, so rework the code accordingly.
There is still a need to export information about whether or not the
IOMMU is configured in a manner compatible with SNP, so relocate the
existing amd_iommu_snp_en flag so it can be used to convey that
information in place of the return code that was previously provided by
calls to amd_iommu_snp_enable().
While here, also adjust the kernel messages related to IOMMU SNP
enablement for consistency/grammar/clarity.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-4-michael.roth@amd.com
No one is using this function. Hence remove it. Also move PCI device
feature detection flags to amd_iommu_types.h as its only used inside
AMD IOMMU driver.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD GPU driver which was the only in-kernel user of iommu_v2 module
removed dependency on iommu_v2 module.
Also we are working on adding SVA support in AMD IOMMU driver. Device
drivers are expected to use common SVA framework to enable device
PASID/PRI features.
Removing iommu_v2 module and then adding SVA simplifies the development.
Hence remove iommu_v2 module.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support SNP, IOMMU needs to be enabled, and prohibits IOMMU
configurations where DTE[Mode]=0, which means it cannot be supported with
IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY),
and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page
table. Otherwise, RMP table initialization could cause the system to crash.
The request to enable SNP support in IOMMU must be done before PCI
initialization state of the IOMMU driver because enabling SNP affects
how IOMMU driver sets up IOMMU data structures (i.e. DTE).
Unlike other IOMMU features, SNP feature does not have an enable bit in
the IOMMU control register. Instead, the IOMMU driver introduces
an amd_iommu_snp_en variable to track enabling state of SNP.
Introduce amd_iommu_snp_enable() for other drivers to request enabling
the SNP support in IOMMU, which checks all prerequisites and determines
if the feature can be safely enabled.
Please see the IOMMU spec section 2.12 for further details.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition. Also amdkfd has started
using a few of them using externs in a .c file. End that misery by
moving the prototypes to the proper header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".
No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
Re-factore the logic for activate/deactivate guest virtual APIC mode (GAM)
into helper functions, and export them for other drivers (e.g. SVM).
to support run-time activate/deactivate of SVM AVIC.
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements irq_set_vcpu_affinity() function to set up interrupt
remapping table entry with vapic mode for pass-through devices.
In case requirements for vapic mode are not met, it falls back to set up
the IRTE in legacy mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds AMD IOMMU guest virtual APIC log (GALOG) handler.
When IOMMU hardware receives an interrupt targeting a blocking vcpu,
it creates an entry in the GALOG, and generates an interrupt to notify
the AMD IOMMU driver.
At this point, the driver processes the log entry, and notify the SVM
driver via the registered iommu_ga_log_notifier function.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Any kernel source registering the invalid PPR calback may include the header file with PPR fault flags macros definitions.
Thus we move them to include/linux/amd-iommu.h
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The hardware-initializtion part of the AMD IOMMU driver is
split out into a seperate function. This function can now be
called either from amd_iommu_init() itself or any other
place if the hardware needs to be ready earlier. This will
be used to implement interrupt remapping for AMD.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This call-back is invoked when the task that is bound to a
pasid is about to exit. The driver can use it to shutdown
all context related to that context in a safe way.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function can be used to find out which features
necessary for IOMMUv2 usage are available on a given device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds the amd_iommu_init_device() and
amd_iommu_free_device() functions which make a device and
the IOMMU ready for IOMMUv2 usage.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A few parts of the driver were missing in drivers/iommu.
Move them there to have the complete driver in that
directory.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
