We need this to support MICFIL PDM found on i.MX8MP where the DAI link
supports only capture direction.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This converts the remaining Wolfson ASoC codecs to
use GPIO descriptors.
These Wolfson codecs are mostly used with different
Samsung S3C (especially Cragganmore 6410) board files,
so the in-tree users are fixed up in the process.
This converts the WM8996 codec to use GPIO descriptors, an a similar
way to WM5100.
The driver is instantiating a GPIO chip named wm8996, and we get
rid of the base address for the GPIO chip from the platform data and
just use dynamic numbering. Move base and ngpio into the static
gpio_chip template.
Fix up the only in-tree user which is the Cragganmore 6410 module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-5-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM5100 codec to use GPIO descriptors, a pretty
straight-forward conversion with the following peculiarities:
- The driver is instantiating a GPIO chip named wm5100, and the
headphone polarity detection GPIO is lifted from there. We add
this to the GPIO descriptor table as well, and we can then get
rid of also the base address for the GPIO chip from the
platform data and just use dynamic numbering.
- Fix up the only in-tree user which is the Cragganmore 6410
module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-4-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM2200 codec to use GPIO descriptors.
This is a pretty straight-forward conversion, and it also
switches over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
This coded does not seem to get selected or be selectable
through Kconfig, I had to hack another soundcard Kconfig
entry to select it for compile tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-3-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM1250-EV1 codec to use GPIO descriptors.
It turns out that the platform data was only used to pass some
global GPIO numbers from a board file, so we get rid of this
and also switch over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
The driver obtains two GPIO lines named OSR and master and just
pull them low, we leave this behaviour as it was.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-2-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
sof header file requires these struct with 4 byte aligned, so
add same alignment in sof driver definition.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the Cirrus CS4271 ASoC codec driver to use
GPIO descriptors.
It turns out that there are two in-kernel users of the platform
data passing mechanism so these are switched over as well.
One locally defined GPIO "gpio_disabled" is declared in the
state struct but completely unused in the driver, so we delete
it.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-6-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a struct sof_loadable_file_profile which can be filled by platforms
(sof-acpi-dev.c, sof-of-dev.c and sof-acpi-dev.c) to be able to use common,
generic code to handle path customization.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC CPU:Codec = N:M connection is using connection mapping idea,
but it is used for N < M case only. We want to use it for any case.
By this patch, not only N:M connection, but all existing connection
(1:1, 1:N, N:N) will use same connection mapping. Then, because it will
use default mapping, no conversion patch is needed to exising drivers.
More over, CPU:Codec = N:M (N > M) also supported in the same time.
ch_maps array will has CPU/Codec index by this patch.
Image
CPU0 <---> Codec0
CPU1 <-+-> Codec1
CPU2 <-/
ch_map
ch_map[0].cpu = 0 ch_map[0].codec = 0
ch_map[1].cpu = 1 ch_map[1].codec = 1
ch_map[2].cpu = 2 ch_map[2].codec = 1
Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the module notification message the information about the notification
is provided via the mailbox with the sof_ipc4_notify_module_data struct.
It contains the module and instance id of the sender of the notification,
the event_id and optionally additional data which is module and event
specific.
At the same time add definitions to identify ALSA kcontrol change
notification.
These notifications use standardized event_id, modules must follow this if
they support such notifications:
upper 16 bit: 0xA15A as a magic identification value
lower 16 bit: param_id of the changed control
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we only support configuration for number of channels and
sample rate.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231109135900.88310-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/rAQACgkQJNaLcl1U
h9AXVwf/SwWrxTus3+O2hS5rwusjqQBn1t2mzlnxsYNVCYGBcjOpMGL4HrJzn++e
DJXoMyWis5FNKFWyPtKMGE1kZYdUUE/g7LpZOBew4P47nBv6SQWRvUxPfoq8mdOg
Xb4+kjBzTq1dhwZnZPvNdsknvM7cLfx/lyo2vUJR4peDL0rzgnx72fhRZAjzh2OH
CSz69aTjpliqikp+V7JVFYf2yma2LjTOCL2saiIF/PcxsqUUa73XTggg610EPY+R
pOFb2MBRDbZuJrETbaiytLwtcPuvrpiHRHhxuClsjHGVTDbGfE7GzePS+yUu66y9
LO8oAl7kJebw+WWffIOoL2IjXcG9tA==
=nn11
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
simple_util_remove() returned zero unconditionally. Make it return void
instead and convert all users to struct platform_device::remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231013221945.1489203-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUy6X8ACgkQJNaLcl1U
h9Cv7Qf+PO4ucl/rFITWAp2Ta9fw7Z5J6UCiXiR54TPgAiLJrpKSi3rbYTXjO90Y
1NNOdoMKr109zdOpdSZI7EX0GgWQbGbdB40nxESdTcojAloRH0jt4RaF7G7B7+86
b8PGlVPLLV/4zFf9f2gpEKPcKhRRRKYOBIEB+amfjWpdXVrqPD3zS/S16Q3Hn4Gy
Fx9b9X/lVDG9uqJomHpunEdViZjkm5CCNzdyAhHH99afiqSe//pevx6/FpzAHyng
AZgE9Yfq4Xw4pdzDdGVfYC+L1GZiHIDRzsusz6aPA5nrMhSn0ru8PMGtmQQTzyhb
PLYw0OW8cWymfqwal8wrNGJfSZ8IGA==
=lN5P
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
Now that all drivers have moved from modprobe loading to
handling -EPROBE_DEFER, we can remove the argument again.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some drivers use one event callback for multiple widgets but still need
to perform a bit different actions based on actual widget. This is done
by comparing widget name, however drivers tend to miss possible name
prefix. Add a helper to solve common mistakes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155710.821315-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
AudioDSP firmware is the one who kicks SDxFIFOS calculation when a
stream is decoupled mode. During firmware bring up procedure, there is
no firmware running and the code-loading stream is always a decoupled
one. So, there is none to trigger the calculation and we end up with
false-positive timeout (-110) messages.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231006102857.749143-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDAudio stream setup procedure differs between revisions of the
controller device. Currently the differences are handled directly within
AudioDSP platform drivers with if-statements. Implement a more generic
approach and expose a function that a platform driver may use to ensure
the correct procedure is followed each time.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Software shall read SDxFIFOS calculated by the hardware and notify if
invalid value is programmed before continuing the stream preparation.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct snd_soc_dapm_widget_list.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: linux-hardening@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231003232852.work.257-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The two CS35L56_HIBERNATE_WAKE_* constants in cs35l56.h aren't used by
any of the driver code.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231003093418.21600-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixed m68k compiling issue: mapping table can save code field; storing the
dev_idx as a member of block can reduce unnecessary time and system
resource comsumption of dev_idx mapping every time the block data writing
to the dsp.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20231002090434.1896-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On init we have sequence:
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_pcm_runtime(card, dai_link);
ret = init_some_other_things(...);
if (ret)
goto probe_end:
for_each_card_rtds(card, rtd) {
ret = soc_init_pcm_runtime(card, rtd);
probe_end:
while on exit:
for_each_card_rtds(card, rtd)
snd_soc_link_exit(rtd);
If init_some_other_things() step fails due to error we end up with
not fully setup rtds and try to call snd_soc_link_exit on them, which
depending on contents on .link_exit handler, can end up dereferencing
NULL pointer.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()),
but these are unified into snd_soc_xxx().
simple_card / audio_graph drivers are historically using
asoc_xxx() prefix too. simple_card / audio_graph are not
ASoC framework, so let's use simple_card_xxx_() / audio_graph_xxx()
for global function prefix.
This patch has asoc_xxx() as define to keep compatible.
It will be removed if all drivers were switched to new style.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edj4s26a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs3ks26i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When a firmware crashes it creats a panic information into a telemetry
slot. The panic format is defined by Zephyr, includes stack and
additional information to help to identify the reason for the crash.
Part of the firmware exception handling the firmware also sends an
EXCEPTION_CAUGHT notification.
This series implements the kernel side handling of the exception: print
information into the kernel log export the whole telemetry slot to user
space for tools extract additional information from the panic dump.
The SOF stack now uses the generic names for the IPC type, the defines can
be dropped.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the enum names for the IPC types to be more descriptive and drop
tying the IPC4 to Intel SoCs.
Add defines to avoid build breakage while the related code is
modified to use the new enum names.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The macro definitions of debug slot can be used by gdb, telemetry
and mtrace log, so move these definitions to header.h from mtrace.
Then these macro definitions can be shared
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel platforms there is a strict order requirement for the DMA
programming:
DSP side configures the buffer and sets the GEN bit
Host side sets the RUN bit.
In order to follow this flow, a new global message type has been added to
prepare the DSP side of the DMA:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP side sets its buffer and sets the GEN bit
Host sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
It is up to the platform code to use the new prepare stage message and how
to handle the reply to it from the firmware, which can indicate that the
message type is not supported/handled.
In this case the kernel should proceed to the LOAD_LIBRARY stage assuming
a single stage library loading:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP replies that the message type is not supported/handled
Host acknowledges the return code and sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add members to struct snd_soc_card to store the PCI subsystem ID (SSID)
of the soundcard.
The PCI specification provides two registers to store a vendor-specific
SSID that can be read by drivers to uniquely identify a particular
"soundcard". This is defined in the PCI specification to distinguish
products that use the same silicon (and therefore have the same silicon
ID) so that product-specific differences can be applied.
PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as
invalid. So the usual pattern of zero-filling the struct and then
assuming a zero value unset will not work. A flag is included to
indicate when the SSID information has been filled in.
Unlike DMI information, which has a free-format entirely up to the vendor,
the PCI SSID has a strictly defined format and a registry of vendor IDs.
It is usual in Windows drivers that the SSID is used as the sole identifier
of the specific end-product and the Windows driver contains tables mapping
that to information about the hardware setup, rather than using ACPI
properties.
This SSID is important information for ASoC components that need to apply
hardware-specific configuration on PCI-based systems.
As the SSID is a generic part of the PCI specification and is treated as
identifying the "soundcard", it is reasonable to include this information
in struct snd_soc_card, instead of components inventing their own custom
ways to pass this information around.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
The Maxim devices are pretty straight-forward to convert
over to use GPIO descriptors, so let's do it.
