Add documentation for FW logging in
Documentation/networking/device_drivers/ethernet/intel/ice.rst
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Once logging is enabled the user should read the data from the 'data'
file. The data is in the form of a binary blob that can be sent to Intel
for decoding. To read the data use a command like:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin
If the user wants to clear the FW log data that has been stored in the
driver then they can write any value to the 'data' file and that will clear
the data. An example is:
# echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data
In addition to being able to read the data the user can configure how
much memory is used to store FW log data. This allows the user to
increase/decrease the amount of memory based on the users situation.
The data is stored such that if the memory fills up then the oldest data
will get overwritten in a circular manner. To change the amount of
memory the user can write to the 'log_size' file like this:
# echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size
Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value
is 1M.
The user can see the current value of 'log_size' by reading the file:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Once users have configured the FW logging then allow them to enable it
by writing to the 'fwlog/enable' file. The file accepts a boolean value
(0 or 1) where 1 means enable FW logging and 0 means disable FW logging.
# echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable
Where <value> is 0 or 1.
The user can read the 'fwlog/enable' file to see whether logging is
enabled or not. Reading the actual data is a separate patch. To see the
current value then:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Users want the ability to debug FW issues by retrieving the
FW logs from the E8xx devices. Use debugfs to allow the user to
configure the log level and number of messages for FW logging.
If FW logging is supported on the E8xx then the file 'fwlog' will be
created under the PCI device ID for the ice driver. If the file does not
exist then either the E8xx doesn't support FW logging or debugfs is not
enabled on the system.
One thing users want to do is control which events are reported. The
user can read and write the 'fwlog/modules/<module name>' to get/set
the log levels. Each module in the FW that supports logging ht as a file
under 'fwlog/modules' that supports reading (to see what the current log
level is) and writing (to change the log level).
The format to set the log levels for a module are:
# echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module>
The supported log levels are:
* none
* error
* warning
* normal
* verbose
Each level includes the messages from the previous/lower level
The modules that are supported are:
* general
* ctrl
* link
* link_topo
* dnl
* i2c
* sdp
* mdio
* adminq
* hdma
* lldp
* dcbx
* dcb
* xlr
* nvm
* auth
* vpd
* iosf
* parser
* sw
* scheduler
* txq
* rsvd
* post
* watchdog
* task_dispatch
* mng
* synce
* health
* tsdrv
* pfreg
* mdlver
* all
The module 'all' is a special module which allows the user to read or
write to all of the modules.
The following example command would set the DCB module to the 'normal'
log level:
# echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
If the user wants to set the DCB, Link, and the AdminQ modules to
'verbose' then the commands are:
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq
If the user wants to set all modules to the 'warning' level then the
command is:
# echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
If the user wants to disable logging for a module then they can set the
level to 'none'. An example setting the 'watchdog' module is:
# echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog
If the user wants to see what the log level is for a specific module
then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
This will return the log level for the DCB module. If the user wants to
see the log level for all the modules then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
Writing to the module file will update the configuration, but NOT enable the
configuration (that is a separate command).
In addition to configuring the modules, the user can also configure the
number of log messages (nr_messages) to include in a single Admin Receive
Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128
means push only when the max AQ command buffer is full). The suggested
value is 10.
To see/change the resolution the user can read/write the
'fwlog/nr_messages' file. An example changing the value to 50 is
# echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages
To see the current value of 'nr_messages' then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The FW logging code doesn't work because there is no way to set
cq_ena or uart_ena so remove the code. This code is the original
(v1) way of FW logging so it should be replaced with the v2 way.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, mvpp2 only supports RGMII. This commit adds support for MII.
The description in Marvell's functional specification seems to be wrong.
To enable MII, we need to set GENCONF_CTRL0_PORT3_RGMII, while for RGMII
we need to clear it. This is also how U-Boot handles it.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212141200.62579-1-eichest@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-12 (igb, e1000e)
This series contains updates to igb and e1000e drivers.
Ilpo Järvinen does some cleanups to both drivers: utilizing FIELD_GET()
helpers and using standard kernel defines over driver created ones.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Use pcie_capability_read_word() for reading LNKSTA
e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code
igb: Use FIELD_GET() to extract Link Width
====================
Link: https://lore.kernel.org/r/20231212204947.513563-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ahmed Zaki says:
====================
Support symmetric-xor RSS hash
Patches 1 and 2 modify the get/set_rxh ethtool API to take a pointer to
struct of parameters instead of individual params. This will allow future
changes to the uAPI-shared struct ethtool_rxfh without changing the
drivers' API.
Patch 3 adds the support at the Kernel level, allowing the user to set a
symmetric-xor RSS hash for a netdevice via:
# ethtool -X eth0 hfunc toeplitz symmetric-xor
and clears the flag via:
# ethtool -X eth0 hfunc toeplitz
The "symmetric-xor" is set in a new "input_xfrm" field in struct
ethtool_rxfh. Support for the new "symmetric-xor" flag will be later sent
to the "ethtool" user-space tool.
Patch 4 fixes a long standing bug with the ice hash function register
values. The bug has been benign for now since only (asymmetric) Toeplitz
hash (Zero) has been used.
Patches 5 and 6 lay some groundwork refactoring. While the first is
mainly cosmetic, the second is needed since there is no more room in the
previous 64-bit RSS profile ID for the symmetric attribute introduced in
the next patch.
Finally, patches 7 and 8 add the symmetric-xor support for the ice
(E800 PFs) and the iAVF drivers.
====================
Link: https://lore.kernel.org/r/20231213003321.605376-1-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the user to set the symmetric Toeplitz hash function via:
# ethtool -X eth0 hfunc toeplitz symmetric-xor
The driver will reject any new RSS configuration if a field other than
(IP src/dst and L4 src/dst ports) is requested for hashing.
The symmetric RSS will not be supported on PFs not advertising the ADV RSS
Offload flag (ADV_RSS_SUPPORT()), for example the E700 series (i40e).
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-9-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the user to set the symmetric Toeplitz hash function via:
# ethtool -X eth0 hfunc toeplitz symmetric-xor
All existing RSS configurations will be converted to symmetric unless they
have a non-symmetric field (other than IP src/dst and L4 src/dst ports)
used for hashing. The driver will reject a new RSS configuration if such
a field is requested.
The hash function in the E800 NICs is set per-VSI and a specific AQ
command is needed to modify the hash function. Use the AQ command to
enable setting the symmetric Toeplitz RSS hash function for any VSI
in the new ice_set_rss_hfunc().
When the Symmetric Toeplitz hash function is used, the hardware sets the
input set of the RSS (Toeplitz) algorithm to be the XOR of the fields
index by HSYMM and the fields index by the INSET registers. We use this
to create a symmetric hash by setting the HSYMM registers to point to
their counterparts in the INSET registers:
HSYMM [src_fv] = dst_fv;
HSYMM [dst_fv] = src_fv;
where src_fv and dst_fv are the indexes of the protocol's src and dst
fields.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-8-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flow director and RSS blocks use separate methods to generate a
unique 64 bit ID for the flow. This is not extendable, especially for
the RSS that already uses all 64 bit space.
Refactor the flow generation API so that the ID is generated within
ice_flow_add_prof(). The FD and RSS blocks caches the generated ID for
later use.
Suggested-by: Dan Nowlin <dan.nowlin@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the driver to use a communication data structure for RSS
config. To do so we introduce the new ice_rss_hash_cfg struct, and then
pass it as an argument to several functions.
Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and
flexible RSS configuration:
ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set
ICE_RSS_INNER_HEADERS - take inner layer as RSS input set
ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for
packet with outer IPV4
ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for
packet with outer IPV6
ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the
behaviour without this change)
Finally, move the virtchnl_rss_algorithm enum to be with the other RSS
related structures in the virtchnl.h file.
There should be no functional change due to this patch.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-6-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is
already done when the values are used, no need to double shift. Bug was
not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is
currently used.
Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX
for consistency.
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-5-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Symmetric RSS hash functions are beneficial in applications that monitor
both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc).
Getting all traffic of the same flow on the same RX queue results in
higher CPU cache efficiency.
A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry
by XORing the source and destination fields and pass the values to the
RSS hash algorithm.
The user may request RSS hash symmetry for a specific algorithm, via:
# ethtool -X eth0 hfunc <hash_alg> symmetric-xor
or turn symmetry off (asymmetric) by:
# ethtool -X eth0 hfunc <hash_alg>
The specific fields for each flow type should then be specified as usual
via:
# ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the RSS context parameters to struct ethtool_rxfh_param and use the
get/set_rxfh to handle the RSS contexts as well.
This is part 2/2 of the fix suggested in [1]:
- Add a rss_context member to the argument struct and a capability
like cap_link_lanes_supported to indicate whether driver supports
rss contexts, then you can remove *et_rxfh_context functions,
and instead call *et_rxfh() with a non-zero rss_context.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tony Nguyen <anthony.l.nguyen@intel.com>
CC: Marcin Wojtas <mw@semihalf.com>
CC: Russell King <linux@armlinux.org.uk>
CC: Sunil Goutham <sgoutham@marvell.com>
CC: Geetha sowjanya <gakula@marvell.com>
CC: Subbaraya Sundeep <sbhatta@marvell.com>
CC: hariprasad <hkelam@marvell.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
CC: Leon Romanovsky <leon@kernel.org>
CC: Edward Cree <ecree.xilinx@gmail.com>
CC: Martin Habets <habetsm.xilinx@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-3-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Releasing the DMA mapping will be useful for other types
of pages, so factor it out. Make sure compiler inlines it,
to avoid any regressions.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support multiple users referencing the same fragment,
'pp_frag_count' is renamed to 'pp_ref_count', transitioning pp pages
from fragment management to reference count management after draining
based on the suggestion from [1].
The idea is that the concept of fragmenting exists before the page is
drained, and all related functions retain their current names.
However, once the page is drained, its management shifts to being
governed by 'pp_ref_count'. Therefore, all functions associated with
that lifecycle stage of a pp page are renamed.
[1]
http://lore.kernel.org/netdev/f71d9448-70c8-8793-dc9a-0eb48a570300@huawei.com
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20231212044614.42733-2-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Builds with W=1 were warning about potential string truncations:
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c: In function 'cxgb_up':
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:38: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 5 and 20 [-Wformat-truncation=]
394 | "%s-%d", d->name, pi->first_qset + i);
| ^~
In function 'name_msix_vecs',
inlined from 'cxgb_up' at drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:1264:3: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:34: note: directive argument in the range [-2147483641, 509]
394 | "%s-%d", d->name, pi->first_qset + i);
| ^~~~~~~
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:393:25: note: 'snprintf' output between 3 and 28 bytes into a destination of size 21
393 | snprintf(adap->msix_info[msi_idx].desc, n,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
394 | "%s-%d", d->name, pi->first_qset + i);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid open-coded %NUL-termination (this code was assuming snprintf
wasn't %NUL terminating when it does -- likely thinking of strncpy),
and grow the size of the string to handle a maximal value.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/
Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231212220954.work.219-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Build with W=1 were warning about a potential string truncation:
drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function 'xgbe_alloc_channels':
drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:73: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=]
211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i);
| ^~
drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:64: note: directive argument in the range [0, 4294967294]
211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i);
| ^~~~~~~~~~~~
drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:17: note: 'snprintf' output between 10 and 19 bytes into a destination of size 16
211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of the "name" buffer to handle the full format range.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231212221312.work.830-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pin ID is just a number. Nobody should rely on a certain value, instead,
user should use either pin-id-get op or RTNetlink to get it.
Unify the pin ID allocation behavior with what there is already
implemented for dpll devices.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231212150605.1141261-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue
is not empty but recvmsg() can not drain the error queue yet.
This is needed to better support timestamping.
I had to export inet_recv_error(), since sctp
can be compiled as a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin says:
====================
idpf: add get/set for Ethtool's header split ringparam
Currently, the header split feature (putting headers in one smaller
buffer and then the data in a separate bigger one) is always enabled
in idpf when supported.
One may want to not have fragmented frames per each packet, for example,
to avoid XDP frags. To better optimize setups for particular workloads,
add ability to switch the header split state on and off via Ethtool's
ringparams, as well as to query the current status.
There's currently only GET in the Ethtool Netlink interface for now,
so add SET first. I suspect idpf is not the only one supporting this.
====================
Link: https://lore.kernel.org/r/20231212142752.935000-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf supports the header split feature and that feature is always
enabled by default.
However, for flexibility reasons and to simplify some scenarios, it
would be useful to have the support for switching the header split
off (and on) from the userspace.
Address that need by adding the user config parameter, the functions
for disabling (or enabling) the header split feature, and calls to
them from the Ethtool ringparam callbacks.
It still is enabled by default if supported by the hardware.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231212142752.935000-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow up commit 9690ae604290 ("ethtool: add header/data split
indication") and add the set part of Ethtool's header split, i.e.
ability to enable/disable header split via the Ethtool Netlink
interface. This might be helpful to optimize the setup for particular
workloads, for example, to avoid XDP frags, and so on.
A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its
ops->supported_ring_params to allow doing that. "Unknown" passed from
the userspace when the header split is supported means the driver is
free to choose the preferred state.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231212142752.935000-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP got MSG_EOR support in linux-4.7.
This is a canonical way of making sure no coalescing
will be performed on the skb, even if it could not be
immediately sent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212110608.3673677-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant
automotive Ethernet physical layer transceiver.
This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and
same TI PHY on other side.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move part of the genphy_c45_pma_read_abilities() code to a separate
function.
Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but
do implement PMA/PMD extended ability register (Register 1.11). To make
use of it, we need to be able to access this part of code separately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pedro Tammela says:
====================
net/sched: optimizations around action binding and init
Scaling optimizations for action binding in rtnl-less filters.
We saw a noticeable lock contention around idrinfo->lock when
testing in a 56 core system, which disappeared after the patches.
====================
Link: https://lore.kernel.org/r/20231211181807.96028-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.
Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
tc actions add action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter ls ...
filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.
When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.
As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.
In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heng Qi says:
====================
virtio-net: support dynamic coalescing moderation
Now, virtio-net already supports per-queue moderation parameter
setting. Based on this, we use the linux dimlib to support
dynamic coalescing moderation for virtio-net.
Due to some scheduling issues, we only support and test the rx dim.
Some test results:
I. Sockperf UDP
=================================================
1. Env
rxq_0 with affinity to cpu_0.
2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989
3. Result
dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%.
dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.
=================================================
II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is
dim off: 978437.23
dim on: 1143638.28
=================================================
III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, requests/sec of wrk client is
dim off: 877931.67
dim on: 1019160.31
=================================================
IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989
2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10
After running this cmd 5 times and averaging the results,
3. Result
dim off: 17.7735 usec
dim on: 18.0110 usec
=================================================
Changelog:
v7->v8:
- Add select DIMLIB.
v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.
v5->v6:
- Add patch(4/5): spin lock for ctrl cmd access
- Patch(5/5):
- Use spin lock and cancel_work_sync to synchronize
v4->v5:
- Patch(4/4):
- Fix possible synchronization issues with cancel_work_sync.
- Reduce if/else nesting levels
v3->v4:
- Patch(5/5): drop.
v2->v3:
- Patch(4/5): some minor modifications.
v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
- improve the judgment of dim switch conditions.
- Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
By comparing the traffic information in the complete napi processes,
let the virtio-net driver automatically adjust the coalescing
moderation parameters of each receive queue.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract commands to set virtqueue coalescing parameters for reuse
by ethtool -Q, vq resize and netdim.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch separates the rx and tx global coalescing moderation
commands to support netdim switches in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx netdim needs to count the traffic during a complete napi process,
and start updating and comparing samples to make decisions after
the napi ends. Let virtqueue_napi_complete() return true if napi is done,
otherwise vice versa.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: updates to PCI error handling
These are improvements to our PCI error handling, including FLR and
AER events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the pci_error_handlers error_detected and resume to be useful in
handling AER events. If the error detected is pci_channel_io_frozen we
set up to do an FLR at the end of the AER handling - this tends to clear
things up well enough that traffic can continue. Else, let the AER/PCI
machinery do what is needed for the less serious errors seen.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove and restore the lif's debugfs pointers on a reset,
and make sure to check for the dentry before removing it
in case an earlier reset failed to rebuild the lif.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When stopping the watchdog timer at remove time we should
be using the new timer_shutdown_sync to assure the timer
doesn't ever get rearmed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there was a failed attempt to reset the PCI connection,
don't later try to read from PCI as the space is unmapped
and will cause a paging request crash. When clearing the PCI
setup we can clear the dev_info register pointer, and check
it before using it in the fw_running test.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a reset fails, the PCI device is left in a disabled
state, so don't try to disable it again on driver remove.
This prevents a scary looking WARN trace in the kernel log.
ionic 0000:2b:00.0: disabling already-disabled device
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands. This speeds up shutdown and
prevents unnecessary timeouts and error messages.
This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we keep and replay the filters and RSS config across
an FLR by using our FW_RESET flag. This gets checked on the
way down and on the way back up to help determine how much LIF
state to keep and restore across a reset action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Complete all counters on XGMAC Core.
These can be useful for debugging.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: phy: at803x: cleanup
The intention of this big series is to try to cleanup the big
at803x PHY driver.
It currently have 3 different family of PHY in it. at803x, qca83xx
and qca808x.
The current codebase required lots of cleanup and reworking to
make the split possible as currently there is a greater use of
adding special function matching the phy_id.
This has been reworked to make the function actually generic
and make the change only in more specific one. The result
is the addition of micro additional function but that is for good
as it massively simplify splitting the driver later.
Consider that this is all in preparation for the addition of
qca807x PHY driver that will also uso some of the functions of
at803x.
Subsequent series will come with the actual PHY split and other
required cleanup. This is only to start the process with minor
changes.
Changes v4:
- Improve at8031_probe function
Changes v3:
- Add Reviewed-by tag from Andrew
- Split patch 10 (at8031 rename) to rename and move
Changes v2:
- Drop split part due to series too big
- Split changes even more
- Fix problem pointed out by Russell (flawed reworked function logic)
- Add Reviewed-by tag from Andrew
- Minor rework to prevent further code duplication for cdt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop specific PHY ID check for cable test functions for at803x. This is
done to make functions more generic. While at it better describe what
the functions does by using more symbolic function names.
PHYs that requires to set additional reg are moved to specific function
calling the more generic one.
cdt_start and cdt_wait_for_completion are changed to take an additional
arg to pass specific values specific to the PHY.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move at8035 specific DT parse for clock out frequency to dedicated probe
to make at803x probe function more generic.
This is to tidy code and no behaviour change are intended.
Detection logic is changed, we check if the clk 25m mask is set and if
it's not zero, we assume the qca,clk-out-frequency property is set.
The property is checked in the generic at803x_parse_dt called by
at803x_probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
