The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The video viu driver is not a vital one for booting purposes.
Remove the unneeded 'default y' option.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The typical behavior is to add all controls, then at the end check if
hdl->error was set, and if so, v4l2_ctrl_handler_free is called and
the error is returned.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For some invalid frames,
especially multiple consecutive invalid frames,
they all can't be decoded,
then the firmware can send picture skipped event
to notify driver that some frames are invalid,
driver can return them with error flag.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
encoded, in previous, driver will return the output buffer immediately
after firmware return it
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
decoded, in previous, driver will return the output buffer immediately
after copying data to stream buffer.
After that, there is no need to make a workaround for poll function.
driver can use v4l2_m2m_fop_poll directly.
Also, driver don't need to keep a input threshold
as the buffer count is up to only 32.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m.
The build errors occur due to [in drivers/media/Makefile]:
obj-$(CONFIG_VIDEO_DEV) += radio/
so the (would be) builtin tea575x.o is not being built.
This is also due to drivers/media/radio/Kconfig declaring a bool
Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV),
so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers
that depend on RADIO_ADPATERS can be configured as builtin (=y) or
as loadable modules (=m).
Fix this by converting RADIO_ADAPTERS to a tristate symbol instead
of a bool symbol.
Fixes these build errors:
ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined!
Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com
Fixes: 9958d30f38 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Syzbot reported that -1 is used as array index. The problem was in
missing validation check.
hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.
hdw->workpoll initialization moved upper to prevent warning in
__flush_work.
Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com
Fixes: d855497edb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove a stray blank line between function definition and body.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The GStreamer v4l2videodec only ever calls S_FMT on the output side
and then expects G_FMT on the capture side to return a valid format.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
[hverkuil: document the new precision field]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Clang static analysis reports this issue
ispcsiphy.c:63:14: warning: The left operand of '<<'
is a garbage value
reg |= mode << shift;
~~~~ ^
The iface switch-statement default case falls through
to ISP_INTERFACE_CCP2B_PHY1. Which is later checked
to set the mode. Since the default case is left out
of this check mode is never set. Instead of falling
through and assuming a ISP_INTERFACE_CCP2B_PHY1
iface, return.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable.
Fix this by changing clk_disable to clk_disable_unprepare.
Fixes: b4155d7d5b ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
We verified that "vpif_obj.sd[i]" is non-NULL on the previous line so
no need to check here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The "bdisp->clock" variable cannot be an error pointer here. No need to
check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The RDACM20 camera supports a single image format which is currently
listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on
the GMSL serial bus, the 2X8 variant does not apply.
Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16.
This fixes a runtime error which is now triggered as the MAX9286
deserializer implements .link_validate().
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a check to make sure the input interface (CSI-2 or parallel) allow
for the requested input bus format. If not inform the user and error out
rather then try to continue with incorrect settings.
While at it add the missing define for RGB666 that is not yet supported
in the driver but we can preemptively check for it in this context
already.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2_m2m_dev structure documentation incorrectly references the
v4l2_m2m_unregister_media_controller() function when it actually means
v4l2_m2m_register_media_controller(). Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
smb_word_op() has a parameter data_format that
determines if the data is either a byte or
word. From inspection, smb_word_op() is only
used by the macros smb_wr16() and smb_rd16()
both pass in CMD_WORD_DATA. There is no use of
smb_word_op() that passes in CMD_BYTE_DATA.
So remove the byte handling.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdevice entity function was left unset, which produces a warning
when probing the device:
mxc-md bus@58000000📷 Entity type for entity rdacm20 19-0051 was
not initialized!
This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave
flags unset.
Fixes: 34009bffc1 ("media: i2c: Add RDACM20 driver")
Fixes: a59f853b3b ("media: i2c: Add driver for RDACM21 camera module")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 0a0e265515 ("media: atmel: atmel-isc: split driver into driver base and isc")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: f386509e49 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call.
Fixes: 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.
In fact, this call is included in aspeed_video_free_buf(). So use the
latter both in the error handling path of the probe and in the remove
function.
It is easier to see the relation with aspeed_video_alloc_buf() this way.
Fixes: d2b4387f3b ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch aims to add UVC_GUID_FORMAT_H265
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2.
They describe the same video encoding method.
So for handling their behavior is the same.
However, when external camera device describes this encoding method,
some use hevc, some use h265.
There is no uniform specification to describe this encoding method.
So if an external camera device use h265 to describe this encoding method,
driver will not recognize it.
Therefore, this patch is to enable driver to read HEVC/H265
and convert it to V4L2_PIX_FMT_HEVC.
Signed-off-by: James_Lin <Ping-lei.Lin@mediatek.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace manual decoding of psize in uvc_parse_streaming(), with the code
from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The case USB_SPEED_WIRELESS and the default one were doing the same.
Also, make always use of usb_endpoint_maxp_mult, as it should have a
sane value, even for LOW speed and WIRELESS.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move all the life cycle of the name to add_mapping. This simplifies
the error handling inside uvc_ioctl_ctrl_map and solves a memory leak
when kemmdup fails.
Also make sure that for custom controls, the user provides a valid name.
Fixes: 07adedb5c606 ("media: uvcvideo: Use control names from framework")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
probe->dwMaxPayloadTransferSize is a 32bit value, but bandwidth is 16bit. This
may lead to a bit overflow.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The list iterator will point to a bogus position containing HEAD if
the list is empty or the element is not found in list. This case
should be checked before any use of the iterator, otherwise it will
lead to a invalid memory access. The missing check here is before
"pin = iterm->id;", just add check here to fix the security bug.
In addition, the list iterator value will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the element is not found in list, considering
the (mis)use here: "if (iterm == NULL".
Use a new value 'it' as the list iterator, while use the old value
'iterm' as a dedicated pointer to point to the found element, which
1. can fix this bug, due to 'iterm' is NULL only if it's not found.
2. do not need to change all the uses of 'iterm' after the loop.
3. can also limit the scope of the list iterator 'it' *only inside*
the traversal loop by simply declaring 'it' inside the loop in the
future, as usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Fixes: d5e90b7a6c ("[media] uvcvideo: Move to video_ioctl2")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As discussed with other developers, the linux-uvc-devel mailing list is
not very useful anymore, and it's better to send people to the general
linux-media mailing list.
Replace/remove the old mailing list address in uvcvideo.rst and
MAINTAINERS.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Do not handroll mdelay().
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into usb-next
We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to pass 'default n' in Kconfig, as by default the
CONFIG_VIDEO_IMX_MIPI_CSIS option is not selected.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit 5c0701a0e7 ("media: imx: csis: Store pads format separately")
broke initialization of the active format on the source pad, as it
forgot to update the .init_cfg() handler. Fix it.
Fixes: 5c0701a0e7 ("media: imx: csis: Store pads format separately")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mipi_csis_dump_regs() function accesses the interface registers
in order to printout their values for debug purposes.
As the function access the registers, it requires the interface to be
powered up. Currently this is only enforced in one of the function's
callers (mipi_csis_log_status)() but not when the function is called by
the debugfs attribute handler.
Make sure to access registers only if the interface is powered up and
remove the same check from the caller.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mipi_csis_device.powered flag only serves for the purpose of
not accessing registers in mipi_csis_log_status() when the interface
is not powered up.
Instead of manually tracking the power state, rely on
pm_runtime_get_if_in_use() to remove the 'powered' flag. Also remove
the locking in the function as runtime_pm() is refcounted and there's no
risk of the interface being powered down behind our backs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simplify the mipi_csis_s_stream() function.
This actually fixes a bug, as if calling the subdev's s_stream(1) fails,
mipi_csis_stop_stream() was not called.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The runtime PM resume handler is guaranteed to be called on a suspended
device, and the suspend handler on a resumed device. The implementation
can thus be simplified.
While at it, rename the mipi_csis_device state field to powered, as the
now state contains a single flag only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Streaming is guaranteed to have been stopped by the time the device gets
runtime suspended, as pm_runtime_put() is called from .s_stream(0) only.
Drop the manual stop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There's no need to implement system suspend/resume manually, as video
pipelines are supposed to be suspended in a controlled and ordered
manner by the data sink driver at system suspend time (and similarly at
resume time). Drop the system suspend/resume handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdev .s_power() operation is deprecated. Drop it, requiring sensor
drivers to correctly use runtime PM instead of relying on .s_power().
As this driver has just been moved out of staging, and necessary drivers
to implement a full camera pipeline are still in staging, no platform
depends yet on this API being called. There is thus no risk of
regression.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Usage of "state" for the device-specific data structure is confusing, as
it can also refer to the subdev state. Rename the structure to
mipi_csis_device, and the corresponding state variables to csis.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For interlaced frame, the amphion vpu will store the
two fields sequential into one buffer, top-bottom order
so the field should be set to V4L2_FIELD_SEQ_TB.
fix the previous bug that set it to V4L2_FIELD_SEQ_BT wrongly.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't change the output buffer's bytesused set by user.
Drop allow_zero_bytesused, since it's deprecated.
This should also guarantee it's the application's responsibility
to set bytesused for the output buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the driver fails to call the dma_set_mask(), the driver will get
the following splat:
[ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240
[ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590
[ 55.856822] Call Trace:
[ 55.860327] __process_removed_driver+0x3c/0x240
[ 55.861347] bus_for_each_dev+0x102/0x160
[ 55.861681] i2c_del_driver+0x2f/0x50
This is because the driver has initialized the i2c related resources
in cx23885_dev_setup() but not released them in error handling, fix this
bug by modifying the error path that jumps after failing to call the
dma_set_mask().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Declaring variable "tuner_status" without initializer.
Using uninitialized value "tuner_status" when calling
"*fe_tuner_ops->get_status".
(The function pointer resolves to "cx24113_get_status".)
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add H264 level 1.0, 4.1, 4.2 to the list of supported formats.
While the hardware does not fully support these levels, it does support
most of them. The constraints on frame size and pixel formats already
cover the limitation.
This fixes negotiation of level on GStreamer 1.17.1.
Cc: stable@vger.kernel.org
Fixes: 42a68012e6 ("media: coda: add read-only h.264 decoder profile/level controls")
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CODA960 manual states that ASO/FMO features of baseline are not
supported, so for this reason this driver should only report
constrained baseline support.
This fixes negotiation issue with constrained baseline content
on GStreamer 1.17.1.
ASO/FMO features are unsupported for the encoder and untested for the
decoder because there is currently no userspace support. Neither GStreamer
parsers nor FFMPEG parsers support ASO/FMO.
Cc: stable@vger.kernel.org
Fixes: 42a68012e6 ("media: coda: add read-only h.264 decoder profile/level controls")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The hardware is capable of encoding/decoding RGB and ARGB formats
in whatever order the color components are,
but the resulting jpegs look good
if we start with raw data in BGR/ABGR order,
so we will further only support V4L2_PIX_FMT_BGR24 and V4L2_PIX_FMT_ABGR32.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Wait finishing jpeg job before system sleep,
otherwise the encoding/decoding can't be resumed after suspend.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stop bailing out on JPEG header parsing errors during streamon.
This allows userspace to provide valid output buffers later and
fixes a v4l2-compliance streaming test failure:
fail: v4l2-test-buffers.cpp(1429): node->streamon(q.g_type())
test MMAP (no poll): FAIL
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If JPEG header parsing fails, output a single message instead of two
messages that say the same thing.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If decoding fails because the output buffer does not contain a
valid header, set the error flag on the returned capture buffer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The JPEG decoder in the CODA960 VPU can downscale images while decoding,
with a factor of 1/2, 1/4, or 1/8.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The variable m is being assigned a value that is never read, it
is being re-assigned in both paths of the following if-statement.
The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the decoder prepare_run callback returns an error, the hardware
is never started and v4l2_m2m_job_finish() is called immediately,
currently in every error path.
Remove the duplicated job_finish calls from the error paths and reuse
the v4l2_m2m_job_finish() at the end of coda_pic_run_work instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
coda_fill_bitstream() must be called under the bitstream mutex.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use v4l2_disable_ioctl() to disable the stateful encoder ioctls
VIDIOC_ENUM_FRAMEINTERVALS, VIDIOC_G_PARM, and VIDIOC_S_PARM for
the jpeg encoder device, to fix this v4l2-compliance test failure:
fail: v4l2-test-formats.cpp(68): node->is_m2m && !(node->codec_mask & STATEFUL_ENCODER)
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
fail: v4l2-test-formats.cpp(1363): node->is_m2m && !is_stateful_enc
test VIDIOC_G/S_PARM: FAIL
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use v4l2_disable_ioctl() to disable the encoder ioctls
VIDIOC_ENUM_FRAMESIZES, VIDIOC_ENUM_FRAMEINTERVALS, VIDIOC_G_PARM, and
VIDIOC_S_PARM, to fix this v4l2-compliance test failure:
fail: v4l2-test-formats.cpp(1363): node->is_m2m && !is_stateful_enc
test VIDIOC_G/S_PARM: FAIL
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use v4l2_disable_ioctl() to disable the VIDIOC_TRY_ENCODER_CMD and
VIDIOC_ENCODER_CMD ioctls on decoder video devices and the
VIDIOC_TRY_DECODER_CMD and VIDIOC_DECODER_CMD ioctls on encoder
video devices.
This allows to drop the coda_try_encoder/decoder_cmd() functions
and to use v4l2_m2m_ioctl_try_encoder/decoder_cmd() directly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a control to set intra-refresh type.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When recalculate output buffer size we have to take into account
the output resolution from the firmware received during event change
notification.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This adds QC10C compressed pixel format in the Venus driver, and
make it possible to discover from v4l2 clients.
Note: The QC10C format will be enumerable via VIDIOC_ENUM_FMT when
the bitstream is 10-bits and the headers are parsed.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This adds QC08C compressed pixel format in the Venus driver, and
make it possible to discover from v4l2 clients.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a helper to check supported pixel format per codec and session
type.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add custom Qualcomm raw compressed pixel formats. They are
used in Qualcomm SoCs to optimize the interconnect bandwidth.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Video decoder driver auto-suspends the hardware if there is no
exchange of command or response for certain amount of time.
In auto suspended state, it becomes mandatory to power on the
hardware before requesting it to process a command. The fix
ensures the hardware is powered on during stop streaming.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
During reconfig (DRC) event from firmware, it is not guaranteed that
all the DPB(internal) buffers would be released by the firmware. Some
buffers might be released gradually while processing frames from the
new sequence. These buffers now stay idle in the dpblist.
In subsequent call to queue the DPBs to firmware, these idle buffers
should not be queued. The fix identifies those buffers and free them.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.
Avoid this null pointer derefence by skipping the call when necessary.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This error can appear with wrong configuration and is difficult to find
as it just returns -ETIMEDOUT with no further message.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simplify the mux error path a bit by using dev_err_probe().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The only effect of returning an error code in an i2c remove callback is
that the i2c core emits a generic warning and still removes the device.
So even if disabling the regulator fails it's sensible to further cleanup
and then return zero to only emit a single error message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the driver fails to probe, we will get the following splat:
[ 59.305988] ------------[ cut here ]------------
[ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 59.318362] Call Trace:
[ 59.318582] <TASK>
[ 59.318765] regulator_put+0x1f/0x30
[ 59.319058] devres_release_group+0x319/0x3d0
[ 59.319420] i2c_device_probe+0x766/0x940
Fix this by disabling the regulator in error handling.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently, the driver ends the reg-val list with a 0xFF as a check to stop
the loop. Instead an array of reg-vals can be used to avoid this check,
by using the ARRAY_SIZE(arr) macro to obtain the length of the array and
iterate over it.
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This reverts commit c09d776eaa.
Revert the commit as it breaks runtime PM support on OF based systems.
More fixes to the driver are needed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add v4l2_subdev_get_fmt() helper function which implements
v4l2_subdev_pad_ops.get_fmt using active state. Subdev drivers that
support active state and do not need to do anything special in their
get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is common that media drivers call subdev ops in source subdevs, and
pass NULL as the state. This was the way to indicate that the callee
should use the callee's private active state.
E.g.:
v4l2_subdev_call(priv->source_sd, pad, get_fmt, NULL, &sd_fmt);
Now that we have a real subdev active state in the v4l2_subdev struct,
we want the caller to pass a proper state (when available). And
furthermore, the state should be locked.
This would mean changing all the callers, which is the long term goal.
To fix this issue in the short term, let's add an extra wrapper layer to
all v4l2_subdev_call_pad_wrappers which deal with states. These wrappers
handle the state == NULL case by using the locked active state instead
(when available).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The V4L2 subdevs have managed without centralized locking for the state
(previously pad_config), as the try-state is supposedly safe (although I
believe two TRY ioctls for the same fd would race), and the
active-state, and its locking, is managed by the drivers internally.
We now have active-state in a centralized position, and need locking.
Strictly speaking the locking is only needed for new drivers that use
the new state, as the current drivers continue behaving as they used to.
However, active-state locking is complicated by the fact that currently
the real active-state of a subdev is split into multiple parts: the new
v4l2_subdev_state, subdev control state, and subdev's internal state.
In the future all these three states should be combined into one state
(the v4l2_subdev_state), and then a single lock for the state should be
sufficient.
But to solve the current split-state situation we need to share locks
between the three states. This is accomplished by using the same lock
management as the control handler does: we use a pointer to a mutex,
allowing the driver to override the default mutex. Thus the driver can
do e.g.:
sd->state_lock = sd->ctrl_handler->lock;
before calling v4l2_subdev_init_finalize(), resulting in sharing the
same lock between the states and the controls.
The locking model for active-state is such that any subdev op that gets
the state as a parameter expects the state to be already locked by the
caller, and expects the caller to release the lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
At the moment when a subdev op is called, the TRY subdev state
(subdev_fh->state) is passed as a parameter even for the ACTIVE case, or
alternatively a NULL can be passed for ACTIVE case. This used to make
sense, as the ACTIVE state was handled internally by the subdev drivers.
We now have a state for the ACTIVE case in a standard place, and can
pass that also to the drivers. This patch changes the subdev ioctls to
either pass the TRY or ACTIVE state to the subdev.
Unfortunately many drivers call ops from other subdevs, and implicitly
pass NULL as the state, so this is just a partial solution. A coccinelle
spatch could perhaps be created which fixes the drivers' subdev calls.
For all current upstream drivers this doesn't matter, as they do not
expect to get a valid state for ACTIVE case. But future drivers which
support multiplexed streaming and routing will depend on getting a state
for both active and try cases.
For new drivers we can mandate that the pipelines where the drivers are
used need to pass the state properly, or preferably, not call such
subdev ops at all.
However, if an existing subdev driver is changed to support multiplexed
streams, the driver has to consider cases where its ops will be called
with NULL state. The problem can easily be solved by using the
v4l2_subdev_lock_and_get_active_state() helper, introduced in a follow
up patch.
Another follow up patch adds wrappers for pad ops dealing with subdev
state, which automate the use of
v4l2_subdev_lock_and_get_active_state() for cases where the state is
NULL.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new 'active_state' field to struct v4l2_subdev to which we can
store the active state of a subdev. This will place the subdev
configuration into a known place, allowing us to use the state directly
from the v4l2 framework, thus simplifying the drivers.
Also add functions v4l2_subdev_init_finalize() and
v4l2_subdev_cleanup(), which will allocate and free the active state.
The functions are named in a generic way so that they can be also used
for other subdev initialization work.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_subdev_alloc_state() and v4l2_subdev_free_state() are not supposed
to be used by the drivers. However, we do have a few drivers that use
those at the moment, so we need to expose these functions for the time
being.
Prefix the functions with __ to mark the functions as internal.
At the same time, rename them to v4l2_subdev_state_alloc and
v4l2_subdev_state_free to match the style used for other functions like
video_device_alloc() and media_request_alloc().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
subdev_open() is inside #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API, which
depends on CONFIG_MEDIA_CONTROLLER, so there's no need for an extra
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ov5645 driver reports as its unique supported format
MEDIA_BUS_FMT_UYVY8_2X8, which is not correct as the sensor
uses the MIPI CSI-2 serial bus.
Fix that by using MEDIA_BUS_FMT_UYVY8_1X16 instead.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media_gobj_destroy has already set graph_obj.mdev to NULL. There is no
need to set it again.
[Sakari Ailus: Remove extra newline, rewrap commit msg]
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Matching on device fwnode handles is deprecated in favour of endpoint
fwnode handles. Switch the __v4l2_async_nf_add_fwnode_remote() function
to use the latter. The match code handles backward compatibility by
falling by to the device fwnode handle, so this shouldn't introduce any
regression.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The bus_info field is set by most drivers based on the type of the device
bus as well as the name of the device. Do this in v4l_querycap() so
drivers don't need to. This keeps compatibility with non-default and silly
bus_info.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove redundant kerneldoc documentation in mc-device.c. The functions are
already documented in media-device.h, where non-redundant documentation is
also moved.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use an unsigned int to index an array instead of a signed one.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use %u for printing unsigned integer or u32 values. In a lot of cases %d
was being used instead.
Also remove an extra debug print --- the number of lanes is already
printed by V4L2 when parsing fwnode endpoints when dynamic debug is
enabled.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Upon an async fwnode match, there's some typical behaviour that the
notifier and matching subdev will want to do. For example, a notifier
representing a sensor matching to an async subdev representing its
VCM will want to create an ancillary link to expose that relationship
to userspace.
To avoid lots of code in individual drivers, try to build these links
within v4l2 core.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add functions to create ancillary links, so that they don't need to
be manually created by users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now we have three types of media link, printing the right name during
debug output is slightly more complicated. Add a helper function to
make it easier.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When iterating over the media graph, don't follow links that are not
data links.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The original implementation removes reverse links for any input link and
assumes the presense of sink/source.
It fails when the link is a not a data link.
media_entity_remove_links when there's an ancillary link can also fail.
We only need to remove reverse links for a data link.
Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for MEDIA_BUS_FMT_JPEG_1X8 media bus code to the
CSIS driver.
The MEDIA_BUS_FMT_JPEG_1X8 code is mapped to the RAW8 CSI-2 Data Type,
while the CSI-2 specification suggests to use User Defined Data Type 1.
As reported in the comment, the CSIS interface captures arbitrary Data
Types by using a pixel sampling mode not supported by the IP core
connected to it on i.MX SoCs.
As some sensors, such as OV5640, support sending JPEG data on the RAW8
Data Type and capture operations work correcty with such configuration,
map MEDIA_BUS_FMT_JPEG_1X8 to Data Type 0x2a.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This new optional callback is called when the adapter is fully configured
or fully unconfigured. Some drivers may have to take action when this
happens.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Allow drivers to change the transmit timeout value, i.e. after how
long should a transmit be considered 'lost', i.e. the corresponding
cec_transmit_done_ts was never called.
Some CEC devices have their own timeout, and so this timeout value must be
longer than that hardware timeout value. If it is shorter then the
framework would consider the transmit lost, even though it is effectively
still in progress at the hardware level.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The results of non-blocking transmits were not correctly communicated
to userspace.
Specifically:
1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
never arrived (aborted or timed out), then tx_status wasn't set to 0
as it should, and rx_status was hardcoded to ABORTED instead of the
actual reason, such as TIMEOUT. In addition, adap->ops->received() was
never called, so drivers that want to do message processing themselves
would not be informed of the failed reply.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).
N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.
CC: Sean Young <sean@mess.org>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: Benjamin Valentin <benpicco@googlemail.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7d08c2c911 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros
into functions") switched a bunch of BPF_PROG_RUN macros to inline
routines. This changed the semantic a bit. Due to arguments expansion
of macros, it used to be:
rcu_read_lock();
array = rcu_dereference(cgrp->bpf.effective[atype]);
...
Now, with with inline routines, we have:
array_rcu = rcu_dereference(cgrp->bpf.effective[atype]);
/* array_rcu can be kfree'd here */
rcu_read_lock();
array = rcu_dereference(array_rcu);
I'm assuming in practice rcu subsystem isn't fast enough to trigger
this but let's use rcu API properly.
Also, rename to lower caps to not confuse with macros. Additionally,
drop and expand BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY.
See [1] for more context.
[1] https://lore.kernel.org/bpf/CAKH8qBs60fOinFdxiiQikK_q0EcVxGvNTQoWvHLEUGbgcj1UYg@mail.gmail.com/T/#u
v2
- keep rcu locks inside by passing cgroup_bpf
Fixes: 7d08c2c911 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220414161233.170780-1-sdf@google.com
Fix firmware file names assignment in si2157 tuner, allow for running
devices without firmware files needed.
modprobe gives error: unknown chip version Si2147-A30 ROM 0x50
Device initialization is interrupted.
Caused by:
1. table si2157_tuners has swapped fields rom_id and required vs struct
si2157_tuner_info.
2. both firmware file names can be null for devices with
required == false - device uses build-in firmware in this case
Tested on this device:
m07ca:1871 AVerMedia Technologies, Inc. TD310 DVB-T/T2/C dongle
[mchehab: fix mangled patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215726
Link: https://lore.kernel.org/lkml/5f660108-8812-383c-83e4-29ee0558d623@leemhuis.info/
Link: https://lore.kernel.org/linux-media/c4bcaff8-fbad-969e-ad47-e2c487ac02a1@gmail.com
Fixes: 1c35ba3bf9 ("media: si2157: use a different namespace for firmware")
Cc: stable@vger.kernel.org # 5.17.x
Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx-mipi-csis driver (VIDEO_IMX_MIPI_CSIS) lost its dependency on
VIDEO_DEV in commit 63fe3d27b2 ("media: platform/*/Kconfig: make
manufacturer menus more uniform"). This causes build failures with
configurations that don't have VIDEO_DEV set. Fix it by restoring the
dependency.
Link: https://lore.kernel.org/linux-media/20220331123151.1953-1-laurent.pinchart@ideasonboard.com
Fixes: 63fe3d27b2 ("media: platform/*/Kconfig: make manufacturer menus more uniform")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
