- Under SRIOV, SDMA engine is shared between VFs. Therefore,
we will not stop SDMA during hw_fini. This is not an issue
with normal dirver loading and unloading.
- However, when we put the SDMA engine to suspend state and resume
it, the issue starts to show up. Something could attempt to use
that SDMA engine to clear or move memory before the engine is
initialized since the DRM entity is still there.
- Therefore, we will call sdma_v5_2_enable(false) during hw_fini,
and if we are under SRIOV, we will call sdma_v5_2_enable(true)
afterwards to allow other VFs to use SDMA. This way, the DRM
entity of SDMA engine is emptied and it will follow the flow
of resume code path.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The OTG_MASTER_UPDATE_LOCK_SEL is used for GSL and OTGs in the same
group for selecting the OTG_MASTER_UPDATE_LOCK from the same OTG. At
some point, it a check was added to see if OTG is running or not, which
is not necessary, and for this reason, this commit dropped that check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multiple parts of the DCN code, we write directly to the
OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using
the set_vtotal_min_max.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The struct timing_generator_funcs provides a hook for setting up the
maximum possible vertical dimension of display for OTG, as the panel
supports. DCN10 has a standard function named optc1_set_vtotal_min_max
which all ASICs can use to set the aforementioned hook. Since we did not
set it for DCN20, this commit initializes the set_vtotal_min_max with
the DCN10 function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dpia hpd interrupt processing is disabled when entering S4/S0i3 and
would be reenabled after detection completes during resuming. Because,
keeping hpd interrupts enabled during detection leads to multiple
detections for the same hpd transition. There is a S4 case where dpia
hpd interrupt is missed when driver is in transitioning from hpd
interrupt processing disable to enable and the display does not light
up.
[How]
- Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly
control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt
is disabled, dmub will keep the hpd pending and post it once driver
reenables dpia hpd interrupt or when querying with
DMUB_CMD__QUERY_HPD_STATE.
- Added dmub boot option dpia_hpd_int_enable_supported to notify dmub
about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since different features would need to update cursor registers, However,
they would use different approaches.
To unify varied methods, this refactor is implemented the same update
cursor info method for current varied features.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
FCLK pstate allow message should not be dependent on local
"update_fclk".
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Acquire FCLK DPM levels to properly construct DML clock limits. Further
add new logic to keep number of indices for each clock in clk_mgr.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before enabling new crtc, stream_count in dc_state does not sync with
that in drm_atomic_state. Validating dsc in such case would leave newly
added stream not jointly participating in dsc optimization with existing
streams, but simply using default initialized vcpi all the time which
gives wrong dsc determination decision.
Consider the scenaio where one 4k60 connected to the dock under dp-alt mode.
Since dp-alt mode is 2-lane setup, stream 1 consumes 63 slots with dsc needed.
Then hook up a second 4k60 to the dock.
stream 2 connected with 65 slot initialized by default without dsc. dsc
pre validate will not jointly optimize stream 2 with stream 1 before
crtc 2 added into the dc_state. That leads to stream 2 not getting dsc
optimization, and trigger atomic_check failure all the time, as 65 > 63
limit.
After getting all new crtcs added into the state, stream_count in
dc_state correctly reflect that in drm_atomic_state which comes up with
correct dsc decision.
Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why & How]
Add a helper to map ODM/MPC/Multi-Plane resources from DC
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Diagnostics reports exceptions generated when timeout waiting for
DISPCLK frequency divider change expires when testing ODM4to1.
Diagnostics reports exceptions generated when timeout waiting for OTG
busy status expires when disabling OTG during ODM4to1 test.
[How]
Increase HW status waiting time for DISPCLK frequency divider change and
OTG busy status when disable OTG.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Doing timing sync seqence for phantom pipes will not go through since
they are not fully programmed like normal pipes. Skip the sequence on
such pipes
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Currently phy_pix_clk is used to program DTO's which is incorrect.
[How?]
Use the timing pixel clock to program DTO's correctly.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
bug was caused when moving variable from stack to
heap because it was reusable and garbage was left
over, so we need to zero mem
Fixes: 7acc487ab57e ("drm/amd/display: reduce stack size in dcn32 dml (v2)")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Bandwidth validation is using Freesync parameters
from previous Freesync state.
Bandwidth validation ignores DCFCLK calculated
after Freesync parameters are configured
[How]
Set Freesync bandwidth parameters to its default
state before running bandwidth validation.
Take DCFCLK calculated after Freesync bandwidth
parameters are assigned and bandwidth is
recalculated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Request from PMFW to change the messaging format to specify whether we
support z-state via individual bits.
[How]
Update the args we pass in the support message.
Fixes: d5c6909e7460 ("drm/amd/display: Add DCN314 clock manager")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0
[Why]
If psr_feature_enable is set to true by default, it continues to be enabled
for non capable links.
[How]
explicitly disable the feature on links that are not capable of the same.
Fixes: 8c322309e48e9 ("drm/amd/display: Enable PSR")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820.
Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd_total_mem_size is the size of total GPUs vram plus system memory
to estimate page tables memory usage and leave enough VRAM room for page
tables allocation.
Calculate amdkfd_total_mem_size in amdgpu_amdkfd_device_probe is
incorrect because adev->gmc.real_vram_size is still 0 called from
amdgpu_device_ip_early_init. Move the calculation
to amdgpu_amdkfd_device_init to get the correct VRAM size.
Do reverse calculation in amdgpu_amdkfd_device_fini_sw to support
hot-unplugging GPUs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under VRAM usage pression, map to GPU may fail to create pt bo and
vmbo->shadow_list is not initialized, then ttm_bo_release calling
amdgpu_bo_vm_destroy to access vmbo->shadow_list generates below
dmesg and NULL pointer access backtrace:
Set vmbo destroy callback to amdgpu_bo_vm_destroy only after creating pt
bo successfully, otherwise use default callback amdgpu_bo_destroy.
amdgpu: amdgpu_vm_bo_update failed
amdgpu: update_gpuvm_pte() failed
amdgpu: Failed to map bo to gpuvm
amdgpu 0000:43:00.0: amdgpu: Failed to map peer:0000:43:00.0 mem_domain:2
BUG: kernel NULL pointer dereference, address:
RIP: 0010:amdgpu_bo_vm_destroy+0x4d/0x80 [amdgpu]
Call Trace:
<TASK>
ttm_bo_release+0x207/0x320 [amdttm]
amdttm_bo_init_reserved+0x1d6/0x210 [amdttm]
amdgpu_bo_create+0x1ba/0x520 [amdgpu]
amdgpu_bo_create_vm+0x3a/0x80 [amdgpu]
amdgpu_vm_pt_create+0xde/0x270 [amdgpu]
amdgpu_vm_ptes_update+0x63b/0x710 [amdgpu]
amdgpu_vm_update_range+0x2e7/0x6e0 [amdgpu]
amdgpu_vm_bo_update+0x2bd/0x600 [amdgpu]
update_gpuvm_pte+0x160/0x420 [amdgpu]
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x313/0x1130 [amdgpu]
kfd_ioctl_map_memory_to_gpu+0x115/0x390 [amdgpu]
kfd_ioctl+0x24a/0x5b0 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM buddy manager allocates the contiguous memory requests in
a single block or multiple blocks. So for the ttm move operation
(incase of low vram memory) we should consider all the blocks to
compute the total memory size which compared with the struct
ttm_resource num_pages in order to verify that the blocks are
contiguous for the eviction process.
v2: Added a Fixes tag
v3: Rewrite the code to save a bit of calculations and
variables (Christian)
Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit 5a8132b9f606 ("drm/amd/display: remove dead dc vbios code"),
no one use struct i2c_id_config_access, so remove it.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rectify multiple kernel-doc warnings in dcn32_fpu.c.
E.g.:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds dummy_latency_index when MCLK switching using firmware based
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: George Shen <george.shen@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Nevenko Stupar <Nevenko.Stupar@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on
which causes drm_crtc_vblank_get in vrr_transition to fail, and later
when drm_crtc_vblank_put is called the refcount on vblank will be messed
up. Therefore move the call to after manage_dm_interrupts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
DCN 3.1.4 supports DPIA.
[How]
- Set dpia_supported flag for dcn314 in dmub_hw_init()
- Remove comment that becomes irrelevant after this change.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
This patch is to fix the SDMA user queue doorbell missing issue on
SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is
used. Otherwise ringing SDMA user queue doorbell can't wake up
system from gfxoff.
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
In some error path in amdgpu_sdma_init_microcode(), release_firmware() is
not called, the memory allocated in request_firmware() will be leaked,
calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to
avoid memory leak.
Fixes: 15aa13056d11da ("drm/amdgpu: add function to init SDMA microcode")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds some minor code style changes just to reduce the merge
conflicts we have when we upstream some of the VBA code.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During transition from ODM combine to ODM bypass, if DSC is enabled need
to disconnect the DSC mux for pipes no longer in use.
[How]
During ODM update, detect pipes with DSC that are no longer being used
for new state and call new DSC interface to disconnect.
Add new DSC interface to disconnect from pipe
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why and how:
needed to fix bad assumption for enable mcm_luts
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the current configuration supports 2 to 1 ODM policy, let's also
enable the windowed MPO feature.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.
The DCN32 DIO stream encoder reglist is currently missing these two
registers.
[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)
[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add HDMI ACP bit field definition for DCN32.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
