mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-29 17:25:38 +00:00
c2b34d4422
Very basic introduction to the device and the current driver support provided. I expect to expand on this in future versions of this patch set. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230526095824.16336-6-Jonathan.Cameron@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
69 lines
2.6 KiB
ReStructuredText
69 lines
2.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
======================================
|
|
CXL Performance Monitoring Unit (CPMU)
|
|
======================================
|
|
|
|
The CXL rev 3.0 specification provides a definition of CXL Performance
|
|
Monitoring Unit in section 13.2: Performance Monitoring.
|
|
|
|
CXL components (e.g. Root Port, Switch Upstream Port, End Point) may have
|
|
any number of CPMU instances. CPMU capabilities are fully discoverable from
|
|
the devices. The specification provides event definitions for all CXL protocol
|
|
message types and a set of additional events for things commonly counted on
|
|
CXL devices (e.g. DRAM events).
|
|
|
|
CPMU driver
|
|
===========
|
|
|
|
The CPMU driver registers a perf PMU with the name pmu_mem<X>.<Y> on the CXL bus
|
|
representing the Yth CPMU for memX.
|
|
|
|
/sys/bus/cxl/device/pmu_mem<X>.<Y>
|
|
|
|
The associated PMU is registered as
|
|
|
|
/sys/bus/event_sources/devices/cxl_pmu_mem<X>.<Y>
|
|
|
|
In common with other CXL bus devices, the id has no specific meaning and the
|
|
relationship to specific CXL device should be established via the device parent
|
|
of the device on the CXL bus.
|
|
|
|
PMU driver provides description of available events and filter options in sysfs.
|
|
|
|
The "format" directory describes all formats of the config (event vendor id,
|
|
group id and mask) config1 (threshold, filter enables) and config2 (filter
|
|
parameters) fields of the perf_event_attr structure. The "events" directory
|
|
describes all documented events show in perf list.
|
|
|
|
The events shown in perf list are the most fine grained events with a single
|
|
bit of the event mask set. More general events may be enable by setting
|
|
multiple mask bits in config. For example, all Device to Host Read Requests
|
|
may be captured on a single counter by setting the bits for all of
|
|
|
|
* d2h_req_rdcurr
|
|
* d2h_req_rdown
|
|
* d2h_req_rdshared
|
|
* d2h_req_rdany
|
|
* d2h_req_rdownnodata
|
|
|
|
Example of usage::
|
|
|
|
$#perf list
|
|
cxl_pmu_mem0.0/clock_ticks/ [Kernel PMU event]
|
|
cxl_pmu_mem0.0/d2h_req_rdshared/ [Kernel PMU event]
|
|
cxl_pmu_mem0.0/h2d_req_snpcur/ [Kernel PMU event]
|
|
cxl_pmu_mem0.0/h2d_req_snpdata/ [Kernel PMU event]
|
|
cxl_pmu_mem0.0/h2d_req_snpinv/ [Kernel PMU event]
|
|
-----------------------------------------------------------
|
|
|
|
$# perf stat -a -e cxl_pmu_mem0.0/clock_ticks/ -e cxl_pmu_mem0.0/d2h_req_rdshared/
|
|
|
|
Vendor specific events may also be available and if so can be used via
|
|
|
|
$# perf stat -a -e cxl_pmu_mem0.0/vid=VID,gid=GID,mask=MASK/
|
|
|
|
The driver does not support sampling so "perf record" is unsupported.
|
|
It only supports system-wide counting so attaching to a task is
|
|
unsupported.
|