mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-29 17:25:38 +00:00
90b4a1a927
To allow setting an appropriate parent for the struct pmu device remove existing references to /sys/devices/ path. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240412161057.14099-11-Jonathan.Cameron@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
45 lines
1.8 KiB
ReStructuredText
45 lines
1.8 KiB
ReStructuredText
=============================================================
|
|
Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
|
|
=============================================================
|
|
|
|
The ThunderX2 SoC PMU consists of independent, system-wide, per-socket
|
|
PMUs such as the Level 3 Cache (L3C), DDR4 Memory Controller (DMC) and
|
|
Cavium Coherent Processor Interconnect (CCPI2).
|
|
|
|
The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles.
|
|
Events are counted for the default channel (i.e. channel 0) and prorated
|
|
to the total number of channels/tiles.
|
|
|
|
The DMC and L3C support up to 4 counters, while the CCPI2 supports up to 8
|
|
counters. Counters are independently programmable to different events and
|
|
can be started and stopped individually. None of the counters support an
|
|
overflow interrupt. DMC and L3C counters are 32-bit and read every 2 seconds.
|
|
The CCPI2 counters are 64-bit and assumed not to overflow in normal operation.
|
|
|
|
PMU UNCORE (perf) driver:
|
|
|
|
The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
|
|
L3C devices. Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
|
|
(CCPI2) events simultaneously. The PMUs provide a description of their
|
|
available events and configuration options under sysfs, see
|
|
/sys/bus/event_source/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
|
|
|
|
The driver does not support sampling, therefore "perf record" will not
|
|
work. Per-task perf sessions are also not supported.
|
|
|
|
Examples::
|
|
|
|
# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
|
|
|
|
# perf stat -a -e \
|
|
uncore_dmc_0/cnt_cycles/,\
|
|
uncore_dmc_0/data_transfers/,\
|
|
uncore_dmc_0/read_txns/,\
|
|
uncore_dmc_0/write_txns/ sleep 1
|
|
|
|
# perf stat -a -e \
|
|
uncore_l3c_0/read_request/,\
|
|
uncore_l3c_0/read_hit/,\
|
|
uncore_l3c_0/inv_request/,\
|
|
uncore_l3c_0/inv_hit/ sleep 1
|