linux-stable/arch/arm/mach-mvebu/board-v7.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Device Tree support for Armada 370 and XP platforms.
 *
 * Copyright (C) 2012 Marvell
 *
 * Lior Amsalem <alior@marvell.com>
 * Gregory CLEMENT <gregory.clement@free-electrons.com>
 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/mbus.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/smp_scu.h>
#include "armada-370-xp.h"
#include "common.h"
#include "coherency.h"
#include "mvebu-soc-id.h"

static void __iomem *scu_base;

/*
 * Enables the SCU when available. Obviously, this is only useful on
 * Cortex-A based SOCs, not on PJ4B based ones.
 */
static void __init mvebu_scu_enable(void)
{
	struct device_node *np =
		of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
	if (np) {
		scu_base = of_iomap(np, 0);
		scu_enable(scu_base);
		of_node_put(np);
	}
}

void __iomem *mvebu_get_scu_base(void)
{
	return scu_base;
}

/*
 * When returning from suspend, the platform goes through the
 * bootloader, which executes its DDR3 training code. This code has
 * the unfortunate idea of using the first 10 KB of each DRAM bank to
 * exercise the RAM and calculate the optimal timings. Therefore, this
 * area of RAM is overwritten, and shouldn't be used by the kernel if
 * suspend/resume is supported.
 */

#ifdef CONFIG_SUSPEND
#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
static int __init mvebu_scan_mem(unsigned long node, const char *uname,
				 int depth, void *data)
{
	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
	const __be32 *reg, *endp;
	int l;

	if (type == NULL || strcmp(type, "memory"))
		return 0;

	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
	if (reg == NULL)
		reg = of_get_flat_dt_prop(node, "reg", &l);
	if (reg == NULL)
		return 0;

	endp = reg + (l / sizeof(__be32));
	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
		u64 base, size;

		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
		size = dt_mem_next_cell(dt_root_size_cells, &reg);

		if (size < MVEBU_DDR_TRAINING_AREA_SZ)
			pr_warn("Too little memory to reserve for DDR training\n");

		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
	}

	return 0;
}

static void __init mvebu_memblock_reserve(void)
{
	of_scan_flat_dt(mvebu_scan_mem, NULL);
}
#else
static void __init mvebu_memblock_reserve(void) {}
#endif

static void __init mvebu_init_irq(void)
{
	irqchip_init();
	mvebu_scu_enable();
	coherency_init();
	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
}

static void __init i2c_quirk(void)
{
	struct device_node *np;
	u32 dev, rev;

	/*
	 * Only revisons more recent than A0 support the offload
	 * mechanism. We can exit only if we are sure that we can
	 * get the SoC revision and it is more recent than A0.
	 */
	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
		return;

	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
		struct property *new_compat;

		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);

		new_compat->name = kstrdup("compatible", GFP_KERNEL);
		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
						GFP_KERNEL);

		of_update_property(np, new_compat);
	}
}

static void __init mvebu_dt_init(void)
{
	if (of_machine_is_compatible("marvell,armadaxp"))
		i2c_quirk();
}

static void __init armada_370_xp_dt_fixup(void)
{
#ifdef CONFIG_SMP
	smp_set_ops(smp_ops(armada_xp_smp_ops));
#endif
}

static const char * const armada_370_xp_dt_compat[] __initconst = {
	"marvell,armada-370-xp",
	NULL,
};

DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_machine	= mvebu_dt_init,
	.init_irq       = mvebu_init_irq,
	.restart	= mvebu_restart,
	.reserve        = mvebu_memblock_reserve,
	.dt_compat	= armada_370_xp_dt_compat,
	.dt_fixup	= armada_370_xp_dt_fixup,
MACHINE_END

static const char * const armada_375_dt_compat[] __initconst = {
	"marvell,armada375",
	NULL,
};

DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_irq       = mvebu_init_irq,
	.init_machine	= mvebu_dt_init,
	.restart	= mvebu_restart,
	.dt_compat	= armada_375_dt_compat,
MACHINE_END

static const char * const armada_38x_dt_compat[] __initconst = {
	"marvell,armada380",
	"marvell,armada385",
	NULL,
};

DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_irq       = mvebu_init_irq,
	.restart	= mvebu_restart,
	.dt_compat	= armada_38x_dt_compat,
MACHINE_END

static const char * const armada_39x_dt_compat[] __initconst = {
	"marvell,armada390",
	"marvell,armada398",
	NULL,
};

DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)")
	.l2c_aux_val	= 0,
	.l2c_aux_mask	= ~0,
	.init_irq       = mvebu_init_irq,
	.restart	= mvebu_restart,
	.dt_compat	= armada_39x_dt_compat,
MACHINE_END