linux-stable/drivers/cpufreq/kirkwood-cpufreq.c
Uwe Kleine-König a9dedaa07b cpufreq: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/cpufreq to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241020153910.324096-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-28 12:24:39 +01:00

204 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
*
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#define CPU_SW_INT_BLK BIT(28)
static struct priv
{
struct clk *cpu_clk;
struct clk *ddr_clk;
struct clk *powersave_clk;
struct device *dev;
void __iomem *base;
} priv;
#define STATE_CPU_FREQ 0x01
#define STATE_DDR_FREQ 0x02
/*
* Kirkwood can swap the clock to the CPU between two clocks:
*
* - cpu clk
* - ddr clk
*
* The frequencies are set at runtime before registering this table.
*/
static struct cpufreq_frequency_table kirkwood_freq_table[] = {
{0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
{0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
{0, 0, CPUFREQ_TABLE_END},
};
static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
{
return clk_get_rate(priv.powersave_clk) / 1000;
}
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
unsigned int state = kirkwood_freq_table[index].driver_data;
unsigned long reg;
local_irq_disable();
/* Disable interrupts to the CPU */
reg = readl_relaxed(priv.base);
reg |= CPU_SW_INT_BLK;
writel_relaxed(reg, priv.base);
switch (state) {
case STATE_CPU_FREQ:
clk_set_parent(priv.powersave_clk, priv.cpu_clk);
break;
case STATE_DDR_FREQ:
clk_set_parent(priv.powersave_clk, priv.ddr_clk);
break;
}
/* Wait-for-Interrupt, while the hardware changes frequency */
cpu_do_idle();
/* Enable interrupts to the CPU */
reg = readl_relaxed(priv.base);
reg &= ~CPU_SW_INT_BLK;
writel_relaxed(reg, priv.base);
local_irq_enable();
return 0;
}
/* Module init and exit code */
static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
return 0;
}
static struct cpufreq_driver kirkwood_cpufreq_driver = {
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.get = kirkwood_cpufreq_get_cpu_frequency,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = kirkwood_cpufreq_target,
.init = kirkwood_cpufreq_cpu_init,
.name = "kirkwood-cpufreq",
.attr = cpufreq_generic_attr,
};
static int kirkwood_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *np;
int err;
priv.dev = &pdev->dev;
priv.base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv.base))
return PTR_ERR(priv.base);
np = of_cpu_device_node_get(0);
if (!np) {
dev_err(&pdev->dev, "failed to get cpu device node\n");
return -ENODEV;
}
priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
if (IS_ERR(priv.cpu_clk)) {
dev_err(priv.dev, "Unable to get cpuclk\n");
err = PTR_ERR(priv.cpu_clk);
goto out_node;
}
err = clk_prepare_enable(priv.cpu_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare cpuclk\n");
goto out_node;
}
kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
if (IS_ERR(priv.ddr_clk)) {
dev_err(priv.dev, "Unable to get ddrclk\n");
err = PTR_ERR(priv.ddr_clk);
goto out_cpu;
}
err = clk_prepare_enable(priv.ddr_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare ddrclk\n");
goto out_cpu;
}
kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
priv.powersave_clk = of_clk_get_by_name(np, "powersave");
if (IS_ERR(priv.powersave_clk)) {
dev_err(priv.dev, "Unable to get powersave\n");
err = PTR_ERR(priv.powersave_clk);
goto out_ddr;
}
err = clk_prepare_enable(priv.powersave_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare powersave clk\n");
goto out_ddr;
}
err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
if (err) {
dev_err(priv.dev, "Failed to register cpufreq driver\n");
goto out_powersave;
}
of_node_put(np);
return 0;
out_powersave:
clk_disable_unprepare(priv.powersave_clk);
out_ddr:
clk_disable_unprepare(priv.ddr_clk);
out_cpu:
clk_disable_unprepare(priv.cpu_clk);
out_node:
of_node_put(np);
return err;
}
static void kirkwood_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
clk_disable_unprepare(priv.powersave_clk);
clk_disable_unprepare(priv.ddr_clk);
clk_disable_unprepare(priv.cpu_clk);
}
static struct platform_driver kirkwood_cpufreq_platform_driver = {
.probe = kirkwood_cpufreq_probe,
.remove = kirkwood_cpufreq_remove,
.driver = {
.name = "kirkwood-cpufreq",
},
};
module_platform_driver(kirkwood_cpufreq_platform_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
MODULE_ALIAS("platform:kirkwood-cpufreq");