linux-stable/arch/s390/boot/startup.c
David Hildenbrand 63938e1708 s390/physmem_info: Query diag500(STORAGE LIMIT) to support QEMU/KVM memory devices
To support memory devices under QEMU/KVM, such as virtio-mem,
we have to prepare our kernel virtual address space accordingly and
have to know the highest possible physical memory address we might see
later: the storage limit. The good old SCLP interface is not suitable for
this use case.

In particular, memory owned by memory devices has no relationship to
storage increments, it is always detected using the device driver, and
unaware OSes (no driver) must never try making use of that memory.
Consequently this memory is located outside of the "maximum storage
increment"-indicated memory range.

Let's use our new diag500 STORAGE_LIMIT subcode to query this storage
limit that can exceed the "maximum storage increment", and use the
existing interfaces (i.e., SCLP) to obtain information about the initial
memory that is not owned+managed by memory devices.

If a hypervisor does not support such memory devices, the address exposed
through diag500 STORAGE_LIMIT will correspond to the maximum storage
increment exposed through SCLP.

To teach kdump on s390 to include memory owned by memory devices, there
will be ways to query the relevant memory ranges from the device via a
driver running in special kdump mode (like virtio-mem already implements
to filter /proc/vmcore access so we don't end up reading from unplugged
device blocks).

Update setup_ident_map_size(), to clarify that there can be more than
just online and standby memory.

Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241025141453.1210600-4-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-07 10:26:24 +01:00

536 lines
17 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/string.h>
#include <linux/elf.h>
#include <asm/page-states.h>
#include <asm/boot_data.h>
#include <asm/extmem.h>
#include <asm/sections.h>
#include <asm/maccess.h>
#include <asm/cpu_mf.h>
#include <asm/setup.h>
#include <asm/kasan.h>
#include <asm/kexec.h>
#include <asm/sclp.h>
#include <asm/diag.h>
#include <asm/uv.h>
#include <asm/abs_lowcore.h>
#include <asm/physmem_info.h>
#include "decompressor.h"
#include "boot.h"
#include "uv.h"
struct vm_layout __bootdata_preserved(vm_layout);
unsigned long __bootdata_preserved(__abs_lowcore);
unsigned long __bootdata_preserved(__memcpy_real_area);
pte_t *__bootdata_preserved(memcpy_real_ptep);
unsigned long __bootdata_preserved(VMALLOC_START);
unsigned long __bootdata_preserved(VMALLOC_END);
struct page *__bootdata_preserved(vmemmap);
unsigned long __bootdata_preserved(vmemmap_size);
unsigned long __bootdata_preserved(MODULES_VADDR);
unsigned long __bootdata_preserved(MODULES_END);
unsigned long __bootdata_preserved(max_mappable);
int __bootdata_preserved(relocate_lowcore);
u64 __bootdata_preserved(stfle_fac_list[16]);
struct oldmem_data __bootdata_preserved(oldmem_data);
struct machine_info machine;
void error(char *x)
{
boot_printk("\n\n%s\n\n -- System halted", x);
disabled_wait();
}
static void detect_facilities(void)
{
if (test_facility(8)) {
machine.has_edat1 = 1;
local_ctl_set_bit(0, CR0_EDAT_BIT);
}
if (test_facility(78))
machine.has_edat2 = 1;
if (test_facility(130))
machine.has_nx = 1;
}
static int cmma_test_essa(void)
{
unsigned long reg1, reg2, tmp = 0;
int rc = 1;
psw_t old;
/* Test ESSA_GET_STATE */
asm volatile(
" mvc 0(16,%[psw_old]),0(%[psw_pgm])\n"
" epsw %[reg1],%[reg2]\n"
" st %[reg1],0(%[psw_pgm])\n"
" st %[reg2],4(%[psw_pgm])\n"
" larl %[reg1],1f\n"
" stg %[reg1],8(%[psw_pgm])\n"
" .insn rrf,0xb9ab0000,%[tmp],%[tmp],%[cmd],0\n"
" la %[rc],0\n"
"1: mvc 0(16,%[psw_pgm]),0(%[psw_old])\n"
: [reg1] "=&d" (reg1),
[reg2] "=&a" (reg2),
[rc] "+&d" (rc),
[tmp] "=&d" (tmp),
"+Q" (get_lowcore()->program_new_psw),
"=Q" (old)
: [psw_old] "a" (&old),
[psw_pgm] "a" (&get_lowcore()->program_new_psw),
[cmd] "i" (ESSA_GET_STATE)
: "cc", "memory");
return rc;
}
static void cmma_init(void)
{
if (!cmma_flag)
return;
if (cmma_test_essa()) {
cmma_flag = 0;
return;
}
if (test_facility(147))
cmma_flag = 2;
}
static void setup_lpp(void)
{
get_lowcore()->current_pid = 0;
get_lowcore()->lpp = LPP_MAGIC;
if (test_facility(40))
lpp(&get_lowcore()->lpp);
}
#ifdef CONFIG_KERNEL_UNCOMPRESSED
static unsigned long mem_safe_offset(void)
{
return (unsigned long)_compressed_start;
}
static void deploy_kernel(void *output)
{
void *uncompressed_start = (void *)_compressed_start;
if (output == uncompressed_start)
return;
memmove(output, uncompressed_start, vmlinux.image_size);
memset(uncompressed_start, 0, vmlinux.image_size);
}
#endif
static void rescue_initrd(unsigned long min, unsigned long max)
{
unsigned long old_addr, addr, size;
if (!IS_ENABLED(CONFIG_BLK_DEV_INITRD))
return;
if (!get_physmem_reserved(RR_INITRD, &addr, &size))
return;
if (addr >= min && addr + size <= max)
return;
old_addr = addr;
physmem_free(RR_INITRD);
addr = physmem_alloc_top_down(RR_INITRD, size, 0);
memmove((void *)addr, (void *)old_addr, size);
}
static void copy_bootdata(void)
{
if (__boot_data_end - __boot_data_start != vmlinux.bootdata_size)
error(".boot.data section size mismatch");
memcpy((void *)vmlinux.bootdata_off, __boot_data_start, vmlinux.bootdata_size);
if (__boot_data_preserved_end - __boot_data_preserved_start != vmlinux.bootdata_preserved_size)
error(".boot.preserved.data section size mismatch");
memcpy((void *)vmlinux.bootdata_preserved_off, __boot_data_preserved_start, vmlinux.bootdata_preserved_size);
}
static void kaslr_adjust_relocs(unsigned long min_addr, unsigned long max_addr,
unsigned long offset, unsigned long phys_offset)
{
int *reloc;
long loc;
/* Adjust R_390_64 relocations */
for (reloc = (int *)__vmlinux_relocs_64_start; reloc < (int *)__vmlinux_relocs_64_end; reloc++) {
loc = (long)*reloc + phys_offset;
if (loc < min_addr || loc > max_addr)
error("64-bit relocation outside of kernel!\n");
*(u64 *)loc += offset;
}
}
static void kaslr_adjust_got(unsigned long offset)
{
u64 *entry;
/*
* Adjust GOT entries, except for ones for undefined weak symbols
* that resolved to zero. This also skips the first three reserved
* entries on s390x that are zero.
*/
for (entry = (u64 *)vmlinux.got_start; entry < (u64 *)vmlinux.got_end; entry++) {
if (*entry)
*entry += offset;
}
}
/*
* Merge information from several sources into a single ident_map_size value.
* "ident_map_size" represents the upper limit of physical memory we may ever
* reach. It might not be all online memory, but also include standby (offline)
* memory or memory areas reserved for other means (e.g., memory devices such as
* virtio-mem).
*
* "ident_map_size" could be lower then actual standby/reserved or even online
* memory present, due to limiting factors. We should never go above this limit.
* It is the size of our identity mapping.
*
* Consider the following factors:
* 1. max_physmem_end - end of physical memory online, standby or reserved.
* Always >= end of the last online memory range (get_physmem_online_end()).
* 2. CONFIG_MAX_PHYSMEM_BITS - the maximum size of physical memory the
* kernel is able to support.
* 3. "mem=" kernel command line option which limits physical memory usage.
* 4. OLDMEM_BASE which is a kdump memory limit when the kernel is executed as
* crash kernel.
* 5. "hsa" size which is a memory limit when the kernel is executed during
* zfcp/nvme dump.
*/
static void setup_ident_map_size(unsigned long max_physmem_end)
{
unsigned long hsa_size;
ident_map_size = max_physmem_end;
if (memory_limit)
ident_map_size = min(ident_map_size, memory_limit);
ident_map_size = min(ident_map_size, 1UL << MAX_PHYSMEM_BITS);
#ifdef CONFIG_CRASH_DUMP
if (oldmem_data.start) {
__kaslr_enabled = 0;
ident_map_size = min(ident_map_size, oldmem_data.size);
} else if (ipl_block_valid && is_ipl_block_dump()) {
__kaslr_enabled = 0;
if (!sclp_early_get_hsa_size(&hsa_size) && hsa_size)
ident_map_size = min(ident_map_size, hsa_size);
}
#endif
}
#define FIXMAP_SIZE round_up(MEMCPY_REAL_SIZE + ABS_LOWCORE_MAP_SIZE, sizeof(struct lowcore))
static unsigned long get_vmem_size(unsigned long identity_size,
unsigned long vmemmap_size,
unsigned long vmalloc_size,
unsigned long rte_size)
{
unsigned long max_mappable, vsize;
max_mappable = max(identity_size, MAX_DCSS_ADDR);
vsize = round_up(SZ_2G + max_mappable, rte_size) +
round_up(vmemmap_size, rte_size) +
FIXMAP_SIZE + MODULES_LEN + KASLR_LEN;
return size_add(vsize, vmalloc_size);
}
static unsigned long setup_kernel_memory_layout(unsigned long kernel_size)
{
unsigned long vmemmap_start;
unsigned long kernel_start;
unsigned long asce_limit;
unsigned long rte_size;
unsigned long pages;
unsigned long vsize;
unsigned long vmax;
pages = ident_map_size / PAGE_SIZE;
/* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
vmemmap_size = SECTION_ALIGN_UP(pages) * sizeof(struct page);
/* choose kernel address space layout: 4 or 3 levels. */
BUILD_BUG_ON(!IS_ALIGNED(TEXT_OFFSET, THREAD_SIZE));
BUILD_BUG_ON(!IS_ALIGNED(__NO_KASLR_START_KERNEL, THREAD_SIZE));
BUILD_BUG_ON(__NO_KASLR_END_KERNEL > _REGION1_SIZE);
vsize = get_vmem_size(ident_map_size, vmemmap_size, vmalloc_size, _REGION3_SIZE);
if (IS_ENABLED(CONFIG_KASAN) || __NO_KASLR_END_KERNEL > _REGION2_SIZE ||
(vsize > _REGION2_SIZE && kaslr_enabled())) {
asce_limit = _REGION1_SIZE;
if (__NO_KASLR_END_KERNEL > _REGION2_SIZE) {
rte_size = _REGION2_SIZE;
vsize = get_vmem_size(ident_map_size, vmemmap_size, vmalloc_size, _REGION2_SIZE);
} else {
rte_size = _REGION3_SIZE;
}
} else {
asce_limit = _REGION2_SIZE;
rte_size = _REGION3_SIZE;
}
/*
* Forcing modules and vmalloc area under the ultravisor
* secure storage limit, so that any vmalloc allocation
* we do could be used to back secure guest storage.
*
* Assume the secure storage limit always exceeds _REGION2_SIZE,
* otherwise asce_limit and rte_size would have been adjusted.
*/
vmax = adjust_to_uv_max(asce_limit);
#ifdef CONFIG_KASAN
BUILD_BUG_ON(__NO_KASLR_END_KERNEL > KASAN_SHADOW_START);
/* force vmalloc and modules below kasan shadow */
vmax = min(vmax, KASAN_SHADOW_START);
#endif
vsize = min(vsize, vmax);
if (kaslr_enabled()) {
unsigned long kernel_end, kaslr_len, slots, pos;
kaslr_len = max(KASLR_LEN, vmax - vsize);
slots = DIV_ROUND_UP(kaslr_len - kernel_size, THREAD_SIZE);
if (get_random(slots, &pos))
pos = 0;
kernel_end = vmax - pos * THREAD_SIZE;
kernel_start = round_down(kernel_end - kernel_size, THREAD_SIZE);
} else if (vmax < __NO_KASLR_END_KERNEL || vsize > __NO_KASLR_END_KERNEL) {
kernel_start = round_down(vmax - kernel_size, THREAD_SIZE);
boot_printk("The kernel base address is forced to %lx\n", kernel_start);
} else {
kernel_start = __NO_KASLR_START_KERNEL;
}
__kaslr_offset = kernel_start;
MODULES_END = round_down(kernel_start, _SEGMENT_SIZE);
MODULES_VADDR = MODULES_END - MODULES_LEN;
VMALLOC_END = MODULES_VADDR;
if (IS_ENABLED(CONFIG_KMSAN))
VMALLOC_END -= MODULES_LEN * 2;
/* allow vmalloc area to occupy up to about 1/2 of the rest virtual space left */
vsize = (VMALLOC_END - FIXMAP_SIZE) / 2;
vsize = round_down(vsize, _SEGMENT_SIZE);
vmalloc_size = min(vmalloc_size, vsize);
if (IS_ENABLED(CONFIG_KMSAN)) {
/* take 2/3 of vmalloc area for KMSAN shadow and origins */
vmalloc_size = round_down(vmalloc_size / 3, _SEGMENT_SIZE);
VMALLOC_END -= vmalloc_size * 2;
}
VMALLOC_START = VMALLOC_END - vmalloc_size;
__memcpy_real_area = round_down(VMALLOC_START - MEMCPY_REAL_SIZE, PAGE_SIZE);
__abs_lowcore = round_down(__memcpy_real_area - ABS_LOWCORE_MAP_SIZE,
sizeof(struct lowcore));
/* split remaining virtual space between 1:1 mapping & vmemmap array */
pages = __abs_lowcore / (PAGE_SIZE + sizeof(struct page));
pages = SECTION_ALIGN_UP(pages);
/* keep vmemmap_start aligned to a top level region table entry */
vmemmap_start = round_down(__abs_lowcore - pages * sizeof(struct page), rte_size);
/* make sure identity map doesn't overlay with vmemmap */
ident_map_size = min(ident_map_size, vmemmap_start);
vmemmap_size = SECTION_ALIGN_UP(ident_map_size / PAGE_SIZE) * sizeof(struct page);
/* make sure vmemmap doesn't overlay with absolute lowcore area */
if (vmemmap_start + vmemmap_size > __abs_lowcore) {
vmemmap_size = SECTION_ALIGN_DOWN(ident_map_size / PAGE_SIZE) * sizeof(struct page);
ident_map_size = vmemmap_size / sizeof(struct page) * PAGE_SIZE;
}
vmemmap = (struct page *)vmemmap_start;
/* maximum address for which linear mapping could be created (DCSS, memory) */
BUILD_BUG_ON(MAX_DCSS_ADDR > (1UL << MAX_PHYSMEM_BITS));
max_mappable = max(ident_map_size, MAX_DCSS_ADDR);
max_mappable = min(max_mappable, vmemmap_start);
if (IS_ENABLED(CONFIG_RANDOMIZE_IDENTITY_BASE))
__identity_base = round_down(vmemmap_start - max_mappable, rte_size);
return asce_limit;
}
/*
* This function clears the BSS section of the decompressed Linux kernel and NOT the decompressor's.
*/
static void clear_bss_section(unsigned long kernel_start)
{
memset((void *)kernel_start + vmlinux.image_size, 0, vmlinux.bss_size);
}
/*
* Set vmalloc area size to an 8th of (potential) physical memory
* size, unless size has been set by kernel command line parameter.
*/
static void setup_vmalloc_size(void)
{
unsigned long size;
if (vmalloc_size_set)
return;
size = round_up(ident_map_size / 8, _SEGMENT_SIZE);
vmalloc_size = max(size, vmalloc_size);
}
static void kaslr_adjust_vmlinux_info(long offset)
{
vmlinux.bootdata_off += offset;
vmlinux.bootdata_preserved_off += offset;
vmlinux.got_start += offset;
vmlinux.got_end += offset;
vmlinux.init_mm_off += offset;
vmlinux.swapper_pg_dir_off += offset;
vmlinux.invalid_pg_dir_off += offset;
vmlinux.alt_instructions += offset;
vmlinux.alt_instructions_end += offset;
#ifdef CONFIG_KASAN
vmlinux.kasan_early_shadow_page_off += offset;
vmlinux.kasan_early_shadow_pte_off += offset;
vmlinux.kasan_early_shadow_pmd_off += offset;
vmlinux.kasan_early_shadow_pud_off += offset;
vmlinux.kasan_early_shadow_p4d_off += offset;
#endif
}
void startup_kernel(void)
{
unsigned long vmlinux_size = vmlinux.image_size + vmlinux.bss_size;
unsigned long nokaslr_text_lma, text_lma = 0, amode31_lma = 0;
unsigned long kernel_size = TEXT_OFFSET + vmlinux_size;
unsigned long kaslr_large_page_offset;
unsigned long max_physmem_end;
unsigned long asce_limit;
unsigned long safe_addr;
psw_t psw;
setup_lpp();
/*
* Non-randomized kernel physical start address must be _SEGMENT_SIZE
* aligned (see blow).
*/
nokaslr_text_lma = ALIGN(mem_safe_offset(), _SEGMENT_SIZE);
safe_addr = PAGE_ALIGN(nokaslr_text_lma + vmlinux_size);
/*
* Reserve decompressor memory together with decompression heap,
* buffer and memory which might be occupied by uncompressed kernel
* (if KASLR is off or failed).
*/
physmem_reserve(RR_DECOMPRESSOR, 0, safe_addr);
if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && parmarea.initrd_size)
physmem_reserve(RR_INITRD, parmarea.initrd_start, parmarea.initrd_size);
oldmem_data.start = parmarea.oldmem_base;
oldmem_data.size = parmarea.oldmem_size;
store_ipl_parmblock();
read_ipl_report();
uv_query_info();
sclp_early_read_info();
setup_boot_command_line();
parse_boot_command_line();
detect_facilities();
cmma_init();
sanitize_prot_virt_host();
max_physmem_end = detect_max_physmem_end();
setup_ident_map_size(max_physmem_end);
setup_vmalloc_size();
asce_limit = setup_kernel_memory_layout(kernel_size);
/* got final ident_map_size, physmem allocations could be performed now */
physmem_set_usable_limit(ident_map_size);
detect_physmem_online_ranges(max_physmem_end);
save_ipl_cert_comp_list();
rescue_initrd(safe_addr, ident_map_size);
/*
* __kaslr_offset_phys must be _SEGMENT_SIZE aligned, so the lower
* 20 bits (the offset within a large page) are zero. Copy the last
* 20 bits of __kaslr_offset, which is THREAD_SIZE aligned, to
* __kaslr_offset_phys.
*
* With this the last 20 bits of __kaslr_offset_phys and __kaslr_offset
* are identical, which is required to allow for large mappings of the
* kernel image.
*/
kaslr_large_page_offset = __kaslr_offset & ~_SEGMENT_MASK;
if (kaslr_enabled()) {
unsigned long size = vmlinux_size + kaslr_large_page_offset;
text_lma = randomize_within_range(size, _SEGMENT_SIZE, TEXT_OFFSET, ident_map_size);
}
if (!text_lma)
text_lma = nokaslr_text_lma;
text_lma |= kaslr_large_page_offset;
/*
* [__kaslr_offset_phys..__kaslr_offset_phys + TEXT_OFFSET] region is
* never accessed via the kernel image mapping as per the linker script:
*
* . = TEXT_OFFSET;
*
* Therefore, this region could be used for something else and does
* not need to be reserved. See how it is skipped in setup_vmem().
*/
__kaslr_offset_phys = text_lma - TEXT_OFFSET;
kaslr_adjust_vmlinux_info(__kaslr_offset_phys);
physmem_reserve(RR_VMLINUX, text_lma, vmlinux_size);
deploy_kernel((void *)text_lma);
/* vmlinux decompression is done, shrink reserved low memory */
physmem_reserve(RR_DECOMPRESSOR, 0, (unsigned long)_decompressor_end);
/*
* In case KASLR is enabled the randomized location of .amode31
* section might overlap with .vmlinux.relocs section. To avoid that
* the below randomize_within_range() could have been called with
* __vmlinux_relocs_64_end as the lower range address. However,
* .amode31 section is written to by the decompressed kernel - at
* that time the contents of .vmlinux.relocs is not needed anymore.
* Conversely, .vmlinux.relocs is read only by the decompressor, even
* before the kernel started. Therefore, in case the two sections
* overlap there is no risk of corrupting any data.
*/
if (kaslr_enabled()) {
unsigned long amode31_min;
amode31_min = (unsigned long)_decompressor_end;
amode31_lma = randomize_within_range(vmlinux.amode31_size, PAGE_SIZE, amode31_min, SZ_2G);
}
if (!amode31_lma)
amode31_lma = text_lma - vmlinux.amode31_size;
physmem_reserve(RR_AMODE31, amode31_lma, vmlinux.amode31_size);
/*
* The order of the following operations is important:
*
* - kaslr_adjust_relocs() must follow clear_bss_section() to establish
* static memory references to data in .bss to be used by setup_vmem()
* (i.e init_mm.pgd)
*
* - setup_vmem() must follow kaslr_adjust_relocs() to be able using
* static memory references to data in .bss (i.e init_mm.pgd)
*
* - copy_bootdata() must follow setup_vmem() to propagate changes
* to bootdata made by setup_vmem()
*/
clear_bss_section(text_lma);
kaslr_adjust_relocs(text_lma, text_lma + vmlinux.image_size,
__kaslr_offset, __kaslr_offset_phys);
kaslr_adjust_got(__kaslr_offset);
setup_vmem(__kaslr_offset, __kaslr_offset + kernel_size, asce_limit);
copy_bootdata();
__apply_alternatives((struct alt_instr *)_vmlinux_info.alt_instructions,
(struct alt_instr *)_vmlinux_info.alt_instructions_end,
ALT_CTX_EARLY);
/*
* Save KASLR offset for early dumps, before vmcore_info is set.
* Mark as uneven to distinguish from real vmcore_info pointer.
*/
get_lowcore()->vmcore_info = __kaslr_offset_phys ? __kaslr_offset_phys | 0x1UL : 0;
/*
* Jump to the decompressed kernel entry point and switch DAT mode on.
*/
psw.addr = __kaslr_offset + vmlinux.entry;
psw.mask = PSW_KERNEL_BITS;
__load_psw(psw);
}