Kim, Milo 86b3fef0c7 regulator: lp872x: initialize the DVS mode ...

The platform specific configuration(general_config) is optional.
 However, the DVS settings should be configured explicitly while
 loading the driver.
 This patch enables configuring the default DVS mode even though
 the platform data is not defined.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-06 07:53:02 +08:00

..

88pm8607.c

regulator: 88pm8607: Use regulator_get_voltage_sel_regmap()

2012-05-04 13:32:06 +01:00

aat2870-regulator.c

regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator

2012-07-12 18:22:13 +01:00

ab3100.c

regulator: ab3100: Remove get_voltage implementation for regulator_ops_fixed

2012-08-28 11:00:27 -07:00

ab8500.c

regulator: ab8500: provide per-regulator shift

2012-08-28 11:00:30 -07:00

ad5398.c

regulator: ad5398: Fix min/max current limit boundary checking

2012-07-04 12:39:38 +01:00

anatop-regulator.c

regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel

2012-08-07 18:10:26 +01:00

arizona-ldo1.c

regulator: arizona-ldo1: Implement GPIO enable support

2012-07-03 20:29:30 +01:00

arizona-micsupp.c

regulator: arizona-micsupp: Force regulated mode until we have API support

2012-07-04 16:22:39 +01:00

core.c

regulator: fix kernel-doc warnings in drivers/regulator/core.c

2012-08-28 11:00:30 -07:00

da903x.c

regulator: da903x: Don't read/write to DA9030_INVAL/DA9034_INVAL address

2012-06-08 07:29:47 +08:00

da9052-regulator.c

regulator: da9052: set_current_limit should select the maximum current in specific range

2012-08-28 11:00:26 -07:00

db8500-prcmu.c

mfd: Register db8500-prcmu devices using the newly DT:ed MFD API

2012-07-09 00:16:09 +02:00

dbx500-prcmu.c

regulators/db8500: split off shared dbx500 code

2012-01-20 12:01:29 +00:00

dbx500-prcmu.h

regulators/db8500: split off shared dbx500 code

2012-01-20 12:01:29 +00:00

dummy.c

regulator: dummy: Specify a struct device

2012-05-10 10:48:28 +01:00

dummy.h

regulator: fix build when CONFIG_REGULATOR_DUMMY=n

2010-10-28 22:40:32 +01:00

fixed-helper.c

regulator: extend the fixed dummy voltage regulator to accept voltage

2012-06-19 23:22:30 +01:00

fixed.c

regulator: fixed: dt: support for input supply

2012-07-05 13:49:35 +01:00

gpio-regulator.c

regulator: gpio-regulator: Split setting of voltages and currents

2012-08-08 12:16:06 +01:00

isl6271a-regulator.c

regulator: isl6271a: Remove get_voltage implementation for isl_fixed_ops

2012-08-28 11:00:27 -07:00

Kconfig

regulator: add MAX8907 driver

2012-08-28 11:00:28 -07:00

lp872x.c

regulator: lp872x: initialize the DVS mode

2012-09-06 07:53:02 +08:00

lp3971.c

regulator: lp3971: Use regulator_list_voltage_table()

2012-06-03 13:25:02 +01:00

lp3972.c

regulator: lp3972: Use regulator_list_voltage_table()

2012-06-03 13:25:01 +01:00

lp8788-buck.c

regulator: Use BUCK_FPWM_[MASK|SHIFT] macros to replace buck_pmap table

2012-08-28 11:00:24 -07:00

lp8788-ldo.c

regulator: lp8788-ldo: Set n_voltages to 1 for fixed voltage

2012-08-28 11:00:24 -07:00

Makefile

regulator: add MAX8907 driver

2012-08-28 11:00:28 -07:00

max1586.c

regulator: max1586: Convert max1586_v3_ops to set_voltage_sel and map_voltage_linear

2012-06-08 08:48:23 +08:00

max8649.c

regulator: max8649: fix missing regmap in rdev

2012-06-05 11:15:22 +01:00

max8660.c

regulator: max8660: Convert to set_voltage_sel and regulator_map_voltage_linear

2012-05-15 18:35:42 +01:00

max8907-regulator.c

regulator: max8907: Add MODULE_ALIAS

2012-08-28 11:00:30 -07:00

max8925-regulator.c

regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info

2012-05-17 23:00:56 +01:00

max8952.c

regulator: max8952: Use core GPIO enable support

2012-07-10 14:48:42 +01:00

max8997.c

regulator: max8997: Properly handle gpio_request failure

2012-07-15 21:49:53 +01:00

max8998.c

regulator: max8998: Remove wrong set_suspend_[en|dis]able callback settings

2012-07-09 19:45:12 +01:00

max77686.c

regulator: max77686: Use array to save pointer to rdev

2012-08-28 11:00:26 -07:00

mc13xxx-regulator-core.c

regulator: mc13xxx: Remove get_voltage implementation for single voltage regulators

2012-08-28 11:00:27 -07:00

mc13xxx.h

regulator: mc13xxx: Remove get_voltage implementation for single voltage regulators

2012-08-28 11:00:27 -07:00

mc13783-regulator.c

regulator: mc13783: add regulators sw1x and sw2x

2012-08-28 11:00:30 -07:00

mc13892-regulator.c

regulator: mc13xxx: Remove get_voltage implementation for single voltage regulators

2012-08-28 11:00:27 -07:00

of_regulator.c

regulator: dt: regulator match by regulator-compatible

2012-07-03 20:19:41 +01:00

palmas-regulator.c

regulator: palmas: Convert palmas_ops_ldo to [get|set]_voltage_sel_regmap

2012-08-28 11:00:16 -07:00

pcap-regulator.c

regulator: pcap: Convert to regulator_list_voltage_table

2012-06-08 07:37:29 +08:00

pcf50633-regulator.c

regulator: pcf50633: Convert to regulator_set_voltage_sel_regmap and map_voltage

2012-06-17 21:05:28 +01:00

rc5t583-regulator.c

regulator: rc5t583: Use regulator_set_voltage_time_sel()

2012-06-24 12:13:38 +01:00

s2mps11.c

regulator: s2mps11: Use array to save pointer to rdev

2012-08-28 11:00:15 -07:00

s5m8767.c

regulator: Fix an s5m8767 build failure

2012-07-31 00:51:09 +02:00

tps6105x-regulator.c

regulator: tps6105x: Use regulator_list_voltage_table()

2012-06-03 13:25:01 +01:00

tps6507x-regulator.c

regulator: tps6507x: Avoid duplicating the same mapping table for LDO2 and VDCDCx

2012-06-05 11:20:53 +01:00

tps6524x-regulator.c

regulator: tps6524x: set_current_limit should select the maximum current in specific range

2012-08-28 11:00:26 -07:00

tps6586x-regulator.c

regulator: tps6586x: Convert to regulator_[enable|disable|is_enabled|get_voltage_sel]_regmap

2012-08-28 11:00:25 -07:00

tps62360-regulator.c

regulator: tps62360: use devm_* for gpio request

2012-07-15 21:49:52 +01:00

tps65023-regulator.c

regulator: tps65023: Convert tps65023_ldo_ops to regulator_[get|set]_voltage_sel_regmap

2012-06-19 12:14:11 +01:00

tps65090-regulator.c

Merge remote-tracking branch 'regulator/topic/drivers' into regulator-next

2012-05-12 11:10:25 +01:00

tps65217-regulator.c

regulator: tps65217: Add device tree support

2012-07-12 18:27:36 +01:00

tps65910-regulator.c

regulator: tps65910: set input_supply on desc unconditionally

2012-07-17 11:08:46 +01:00

tps65912-regulator.c

regulator: tps65912: Convert to get_voltage_sel

2012-04-23 13:20:27 +01:00

twl-regulator.c

regulator: using kfree() requires including slab.h

2012-08-28 11:00:28 -07:00

userspace-consumer.c

regulator: userspace-consumer: Convert to use devm_* APIs

2012-04-18 10:26:24 +01:00

virtual.c

regulator: virtual: Replace strict_strtol with kstrtol

2012-04-19 13:48:34 +01:00

wm831x-dcdc.c

regulator: wm831x-dcdc: set_current_limit should select the maximum current in specific range

2012-08-28 11:00:26 -07:00

wm831x-isink.c

MFD changes for 3.5

2012-05-29 11:53:11 -07:00

wm831x-ldo.c

regulator: wm831x-ldo: Check return value of wm831x_reg_read()

2012-08-28 11:00:25 -07:00

wm8350-regulator.c

regulator: wm8350: Reuse map_voltage() to get selector of a given uV

2012-06-17 20:53:58 +01:00

wm8400-regulator.c

regulator: wm8400: Simplify set REGULATOR_MODE_IDLE mode in wm8400_dcdc_set_mode

2012-08-28 11:00:25 -07:00

wm8994-regulator.c

regulator: wm8994: Use core GPIO enable support

2012-07-03 20:29:29 +01:00