linux-stable/drivers/net/phy/mediatek/mtk.h
SkyLake.Huang 3cb1a3c9cb net: phy: mediatek: Integrate read/write page helper functions
This patch integrates read/write page helper functions as MTK phy lib.
They are basically the same in mtk-ge.c & mtk-ge-soc.c.

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00

90 lines
3.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0
*
* Common definition for Mediatek Ethernet PHYs
* Author: SkyLake Huang <SkyLake.Huang@mediatek.com>
* Copyright (c) 2024 MediaTek Inc.
*/
#ifndef _MTK_EPHY_H_
#define _MTK_EPHY_H_
#define MTK_EXT_PAGE_ACCESS 0x1f
/* Registers on MDIO_MMD_VEND2 */
#define MTK_PHY_LED0_ON_CTRL 0x24
#define MTK_PHY_LED1_ON_CTRL 0x26
#define MTK_GPHY_LED_ON_MASK GENMASK(6, 0)
#define MTK_2P5GPHY_LED_ON_MASK GENMASK(7, 0)
#define MTK_PHY_LED_ON_LINK1000 BIT(0)
#define MTK_PHY_LED_ON_LINK100 BIT(1)
#define MTK_PHY_LED_ON_LINK10 BIT(2)
#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
#define MTK_PHY_LED_ON_LINK2500 BIT(7)
#define MTK_PHY_LED_ON_POLARITY BIT(14)
#define MTK_PHY_LED_ON_ENABLE BIT(15)
#define MTK_PHY_LED0_BLINK_CTRL 0x25
#define MTK_PHY_LED1_BLINK_CTRL 0x27
#define MTK_PHY_LED_BLINK_1000TX BIT(0)
#define MTK_PHY_LED_BLINK_1000RX BIT(1)
#define MTK_PHY_LED_BLINK_100TX BIT(2)
#define MTK_PHY_LED_BLINK_100RX BIT(3)
#define MTK_PHY_LED_BLINK_10TX BIT(4)
#define MTK_PHY_LED_BLINK_10RX BIT(5)
#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
#define MTK_PHY_LED_BLINK_2500TX BIT(10)
#define MTK_PHY_LED_BLINK_2500RX BIT(11)
#define MTK_GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK1000 | \
MTK_PHY_LED_ON_LINK100 | \
MTK_PHY_LED_ON_LINK10)
#define MTK_GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
MTK_PHY_LED_BLINK_100RX | \
MTK_PHY_LED_BLINK_10RX)
#define MTK_GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
MTK_PHY_LED_BLINK_100RX | \
MTK_PHY_LED_BLINK_10RX)
#define MTK_2P5GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK2500 | \
MTK_GPHY_LED_ON_SET)
#define MTK_2P5GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
MTK_GPHY_LED_RX_BLINK_SET)
#define MTK_2P5GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
MTK_GPHY_LED_TX_BLINK_SET)
#define MTK_PHY_LED_STATE_FORCE_ON 0
#define MTK_PHY_LED_STATE_FORCE_BLINK 1
#define MTK_PHY_LED_STATE_NETDEV 2
struct mtk_socphy_priv {
unsigned long led_state;
};
int mtk_phy_read_page(struct phy_device *phydev);
int mtk_phy_write_page(struct phy_device *phydev, int page);
int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules,
unsigned long supported_triggers);
int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
unsigned long rules, u16 on_set,
u16 rx_blink_set, u16 tx_blink_set);
int mtk_phy_led_hw_ctrl_get(struct phy_device *phydev, u8 index,
unsigned long *rules, u16 on_set,
u16 rx_blink_set, u16 tx_blink_set);
int mtk_phy_led_num_dly_cfg(u8 index, unsigned long *delay_on,
unsigned long *delay_off, bool *blinking);
int mtk_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
u16 led_on_mask, bool on);
int mtk_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
bool blinking);
void mtk_phy_leds_state_init(struct phy_device *phydev);
#endif /* _MTK_EPHY_H_ */