Bartlomiej Zolnierkiewicz f657911d73 it821x: use ->pio_mode value to determine pair device speed ...

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2010-01-19 01:52:34 -08:00

..

aec62xx.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

ali14xx.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

alim15x3.c

alim15x3: fix handling of UDMA enable bit

2010-01-19 01:52:31 -08:00

amd74xx.c

amd74xx: use ->pio_mode value to determine pair device speed

2010-01-19 01:52:32 -08:00

at91_ide.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

atiixp.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

au1xxx-ide.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

buddha.c

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15 18:52:58 +02:00

cmd64x.c

cmd64x: fix handling of address setup timings

2010-01-19 01:52:32 -08:00

cmd640.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

cs5520.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

cs5530.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

cs5535.c

cs5535: use ->pio_mode value to determine pair device speed

2010-01-19 01:52:33 -08:00

cs5536.c

cs5536: use ->pio_mode value to determine pair device speed

2010-01-19 01:52:33 -08:00

cy82c693.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

delkin_cb.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

dtc2278.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

falconide.c

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15 18:52:58 +02:00

gayle.c

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15 18:52:58 +02:00

hpt366.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

ht6560b.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

icside.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

ide_platform.c

drivers/ide/ide_platform.c: use resource_size()

2009-11-23 10:30:34 -08:00

ide-4drives.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

ide-acpi.c

ACPICA: Major update for acpi_get_object_info external interface

2009-08-27 10:17:15 -04:00

ide-atapi.c

Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

2009-06-20 10:11:11 -07:00

ide-cd_ioctl.c

ide: remove IDE_AFLAG_NO_DOORLOCKING

2008-10-17 18:09:11 +02:00

ide-cd_verbose.c

block: replace sizeof(rq->cmd) with BLK_MAX_CDB

2008-04-29 14:48:55 +02:00

ide-cd.c

const: make block_device_operations const

2009-09-22 07:17:25 -07:00

ide-cd.h

ide-cd: convert to using generic sense request

2009-04-28 07:37:30 +02:00

ide-cs.c

pcmcia: rework the irq_req_t typedef

2009-11-28 18:03:14 +01:00

ide-devsets.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

ide-disk_ioctl.c

[PATCH] switch ide_disk_ops ->ioctl() to sane prototype

2008-10-21 07:47:30 -04:00

ide-disk_proc.c

ide: convert to ->proc_fops

2009-09-01 17:52:57 -07:00

ide-disk.c

ide: fix memory leak when flush command is issued

2009-07-21 20:23:46 -07:00

ide-disk.h

[PATCH] switch ide_disk_ops ->ioctl() to sane prototype

2008-10-21 07:47:30 -04:00

ide-dma-sff.c

ide: remove wmb() from ide-dma-sff.c and scc_pata.c

2009-04-08 14:12:49 +02:00

ide-dma.c

ide: relax DMA info validity checking

2009-06-24 00:32:32 -07:00

ide-eh.c

ide: always kill the whole request on error

2009-06-25 23:57:16 -07:00

ide-floppy_ioctl.c

ide-atapi: remove pc->buf

2009-05-15 06:44:38 +02:00

ide-floppy_proc.c

ide: convert to ->proc_fops

2009-09-01 17:52:57 -07:00

ide-floppy.c

ide: always kill the whole request on error

2009-06-25 23:57:16 -07:00

ide-floppy.h

[PATCH] switch ide_disk_ops ->ioctl() to sane prototype

2008-10-21 07:47:30 -04:00

ide-gd.c

const: make block_device_operations const

2009-09-22 07:17:25 -07:00

ide-gd.h

ide: move ->failed_pc to ide_drive_t

2009-03-27 12:46:34 +01:00

ide-generic.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

ide-h8300.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

ide-io-std.c

ide: refactor tf_read() method

2009-04-08 14:13:03 +02:00

ide-io.c

Revert "ide: improve handling of Power Management requests"

2009-07-06 12:39:27 -07:00

ide-ioctls.c

ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6

2009-11-25 15:04:54 -08:00

ide-iops.c

ide: add SATA cable detection support

2010-01-19 01:41:57 -08:00

ide-legacy.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

ide-lib.c

Merge branch 'master' into for-2.6.31

2009-05-22 20:28:35 +02:00

ide-park.c

ide: use blk_run_queue() instead of blk_start_queueing()

2009-04-28 07:37:28 +02:00

ide-pci-generic.c

pata_piccolo: Driver for old Toshiba chipsets

2009-12-03 14:35:31 -05:00

ide-pio-blacklist.c

ide: move PIO blacklist to ide-pio-blacklist.c

2008-07-16 20:33:39 +02:00

ide-pm.c

ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y

2009-06-29 19:20:42 -07:00

ide-pnp.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

ide-probe.c

ide: add drive->pio_mode field

2010-01-19 01:42:00 -08:00

ide-proc.c

ide: use printk_once

2009-09-22 16:29:00 -07:00

ide-scan-pci.c

ide: replace remaining __FUNCTION__ occurrences

2008-04-26 22:25:20 +02:00

ide-sysfs.c

ide: move sysfs support to ide-sysfs.c

2009-01-02 16:12:48 +01:00

ide-tape.c

ide_tape: kill off use of the ->ioctl operation

2010-01-12 01:56:54 -08:00

ide-taskfile.c

ide: fix races in handling of user-space SET XFER commands

2009-08-07 10:43:00 -07:00

ide-timings.c

ide-timings: use ->pio_mode value to determine fastest PIO speed

2010-01-19 01:47:29 -08:00

ide-xfer-mode.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

ide.c

ide: preserve Host Protected Area by default (v2)

2009-06-07 13:52:52 +02:00

it821x.c

it821x: use ->pio_mode value to determine pair device speed

2010-01-19 01:52:34 -08:00

it8172.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

it8213.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

jmicron.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

Kconfig

ide: update Kconfig text to mark as deprecated

2009-10-29 03:09:26 -07:00

macide.c

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15 18:52:58 +02:00

Makefile

ide: merge ide_arm and ide_generic host drivers

2009-03-31 20:15:24 +02:00

ns87415.c

ide: refactor tf_read() method

2009-04-08 14:13:03 +02:00

opti621.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

palm_bk3710.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

pdc202xx_new.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

pdc202xx_old.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

piix.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

pmac.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

q40ide.c

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15 18:52:58 +02:00

qd65xx.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

qd65xx.h

ide: do not access ide_drive_t 'drive_data' field directly

2009-06-15 22:13:44 +02:00

rapide.c

ide: remove hw_regs_t typedef

2009-05-17 19:12:25 +02:00

rz1000.c

rz1000: apply chipset quirks early (v2)

2008-12-29 20:27:33 +01:00

sc1200.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

scc_pata.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

serverworks.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

setup-pci.c

ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()

2009-06-10 14:37:21 +02:00

sgiioc4.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

siimage.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

sis5513.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

sl82c105.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

slc90e66.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

tc86c001.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

triflex.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

trm290.c

ide: turn selectproc() method into dev_select() method (take 5)

2009-03-31 20:15:32 +02:00

tx4938ide.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

tx4939ide.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00

umc8672.c

ide: change ->set_pio_mode method parameters

2010-01-19 01:44:41 -08:00

via82cxxx.c

ide: change ->set_dma_mode method parameters

2010-01-19 01:45:29 -08:00