linux/net/ipv6/icmp.c

1243 lines
30 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Internet Control Message Protocol (ICMPv6)
* Linux INET6 implementation
*
* Authors:
* Pedro Roque <roque@di.fc.ul.pt>
*
* Based on net/ipv4/icmp.c
*
* RFC 1885
*/
/*
* Changes:
*
* Andi Kleen : exception handling
* Andi Kleen add rate limits. never reply to a icmp.
* add more length checks and other fixes.
* yoshfuji : ensure to sent parameter problem for
* fragments.
* YOSHIFUJI Hideaki @USAGI: added sysctl for icmp rate limit.
* Randy Dunlap and
* YOSHIFUJI Hideaki @USAGI: Per-interface statistics support
* Kazunori MIYAZAWA @USAGI: change output process to use ip6_append_data
*/
#define pr_fmt(fmt) "IPv6: " fmt
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/netfilter.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/icmpv6.h>
#include <net/ip.h>
#include <net/sock.h>
#include <net/ipv6.h>
#include <net/ip6_checksum.h>
#include <net/ping.h>
#include <net/protocol.h>
#include <net/raw.h>
#include <net/rawv6.h>
2022-01-03 17:11:31 +00:00
#include <net/seg6.h>
#include <net/transp_v6.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
#include <net/icmp.h>
#include <net/xfrm.h>
#include <net/inet_common.h>
#include <net/dsfield.h>
#include <net/l3mdev.h>
#include <linux/uaccess.h>
static DEFINE_PER_CPU(struct sock *, ipv6_icmp_sk);
static int icmpv6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
u8 type, u8 code, int offset, __be32 info)
{
/* icmpv6_notify checks 8 bytes can be pulled, icmp6hdr is 8 bytes */
struct icmp6hdr *icmp6 = (struct icmp6hdr *) (skb->data + offset);
struct net *net = dev_net(skb->dev);
if (type == ICMPV6_PKT_TOOBIG)
ip6_update_pmtu(skb, net, info, skb->dev->ifindex, 0, sock_net_uid(net, NULL));
else if (type == NDISC_REDIRECT)
ip6_redirect(skb, net, skb->dev->ifindex, 0,
sock_net_uid(net, NULL));
if (!(type & ICMPV6_INFOMSG_MASK))
if (icmp6->icmp6_type == ICMPV6_ECHO_REQUEST)
ping_err(skb, offset, ntohl(info));
return 0;
}
static int icmpv6_rcv(struct sk_buff *skb);
static const struct inet6_protocol icmpv6_protocol = {
.handler = icmpv6_rcv,
.err_handler = icmpv6_err,
.flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
};
/* Called with BH disabled */
static struct sock *icmpv6_xmit_lock(struct net *net)
{
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
struct sock *sk;
sk = this_cpu_read(ipv6_icmp_sk);
if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
/* This can happen if the output path (f.e. SIT or
* ip6ip6 tunnel) signals dst_link_failure() for an
* outgoing ICMP6 packet.
*/
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
return NULL;
}
sock_net_set(sk, net);
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
return sk;
}
static void icmpv6_xmit_unlock(struct sock *sk)
{
sock_net_set(sk, &init_net);
spin_unlock(&sk->sk_lock.slock);
}
/*
* Figure out, may we reply to this packet with icmp error.
*
* We do not reply, if:
* - it was icmp error message.
* - it is truncated, so that it is known, that protocol is ICMPV6
* (i.e. in the middle of some exthdr)
*
* --ANK (980726)
*/
static bool is_ineligible(const struct sk_buff *skb)
{
int ptr = (u8 *)(ipv6_hdr(skb) + 1) - skb->data;
int len = skb->len - ptr;
__u8 nexthdr = ipv6_hdr(skb)->nexthdr;
__be16 frag_off;
if (len < 0)
return true;
ptr = ipv6_skip_exthdr(skb, ptr, &nexthdr, &frag_off);
if (ptr < 0)
return false;
if (nexthdr == IPPROTO_ICMPV6) {
u8 _type, *tp;
tp = skb_header_pointer(skb,
ptr+offsetof(struct icmp6hdr, icmp6_type),
sizeof(_type), &_type);
/* Based on RFC 8200, Section 4.5 Fragment Header, return
* false if this is a fragment packet with no icmp header info.
*/
if (!tp && frag_off != 0)
return false;
else if (!tp || !(*tp & ICMPV6_INFOMSG_MASK))
return true;
}
return false;
}
static bool icmpv6_mask_allow(struct net *net, int type)
{
if (type > ICMPV6_MSG_MAX)
return true;
/* Limit if icmp type is set in ratemask. */
if (!test_bit(type, net->ipv6.sysctl.icmpv6_ratemask))
return true;
return false;
}
static bool icmpv6_global_allow(struct net *net, int type,
bool *apply_ratelimit)
{
if (icmpv6_mask_allow(net, type))
return true;
if (icmp_global_allow(net)) {
*apply_ratelimit = true;
return true;
}
__ICMP_INC_STATS(net, ICMP_MIB_RATELIMITGLOBAL);
return false;
}
/*
* Check the ICMP output rate limit
*/
static bool icmpv6_xrlim_allow(struct sock *sk, u8 type,
struct flowi6 *fl6, bool apply_ratelimit)
{
struct net *net = sock_net(sk);
struct dst_entry *dst;
bool res = false;
if (!apply_ratelimit)
return true;
/*
* Look up the output route.
* XXX: perhaps the expire for routing entries cloned by
* this lookup should be more aggressive (not longer than timeout).
*/
dst = ip6_route_output(net, sk, fl6);
if (dst->error) {
IP6_INC_STATS(net, ip6_dst_idev(dst),
IPSTATS_MIB_OUTNOROUTES);
} else if (dst->dev && (dst->dev->flags&IFF_LOOPBACK)) {
res = true;
} else {
struct rt6_info *rt = dst_rt6_info(dst);
int tmo = net->ipv6.sysctl.icmpv6_time;
struct inet_peer *peer;
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
peer = inet_getpeer_v6(net->ipv6.peers, &fl6->daddr, 1);
res = inet_peer_xrlim_allow(peer, tmo);
if (peer)
inet_putpeer(peer);
}
if (!res)
__ICMP6_INC_STATS(net, ip6_dst_idev(dst),
ICMP6_MIB_RATELIMITHOST);
else
icmp_global_consume(net);
dst_release(dst);
return res;
}
net: icmp6: do not select saddr from iif when route has prefsrc set Since commit fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") ICMPv6 errors have source addresses from the ingress interface. However, this overrides when source address selection is influenced by setting preferred source addresses on routes. This can result in ICMP errors being lost to upstream BCP38 filters when the wrong source addresses are used, breaking path MTU discovery and traceroute. This patch sets the modified source address selection to only take place when the route used has no prefsrc set. It can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8::3 dev v1 nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip addr add 2001:db8:100::1 dev lo ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1 ip route add 2001:db8:1000::1 via 2001:db8::2 traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute6 -s 2001:db8::3 2001:db8:1000::1 ip netns delete test Output before: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.843 ms !N 0.396 ms !N 0.257 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.772 ms !N 0.257 ms !N 0.357 ms !N After: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8:100::1 (2001:db8:100::1) 8.885 ms !N 0.310 ms !N 0.174 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 1.403 ms !N 0.205 ms !N 0.313 ms !N Fixes: fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03 20:22:57 +00:00
static bool icmpv6_rt_has_prefsrc(struct sock *sk, u8 type,
struct flowi6 *fl6)
{
struct net *net = sock_net(sk);
struct dst_entry *dst;
bool res = false;
dst = ip6_route_output(net, sk, fl6);
if (!dst->error) {
struct rt6_info *rt = dst_rt6_info(dst);
net: icmp6: do not select saddr from iif when route has prefsrc set Since commit fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") ICMPv6 errors have source addresses from the ingress interface. However, this overrides when source address selection is influenced by setting preferred source addresses on routes. This can result in ICMP errors being lost to upstream BCP38 filters when the wrong source addresses are used, breaking path MTU discovery and traceroute. This patch sets the modified source address selection to only take place when the route used has no prefsrc set. It can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8::3 dev v1 nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip addr add 2001:db8:100::1 dev lo ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1 ip route add 2001:db8:1000::1 via 2001:db8::2 traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute6 -s 2001:db8::3 2001:db8:1000::1 ip netns delete test Output before: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.843 ms !N 0.396 ms !N 0.257 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.772 ms !N 0.257 ms !N 0.357 ms !N After: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8:100::1 (2001:db8:100::1) 8.885 ms !N 0.310 ms !N 0.174 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 1.403 ms !N 0.205 ms !N 0.313 ms !N Fixes: fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03 20:22:57 +00:00
struct in6_addr prefsrc;
rt6_get_prefsrc(rt, &prefsrc);
res = !ipv6_addr_any(&prefsrc);
}
dst_release(dst);
return res;
}
/*
* an inline helper for the "simple" if statement below
* checks if parameter problem report is caused by an
* unrecognized IPv6 option that has the Option Type
* highest-order two bits set to 10
*/
static bool opt_unrec(struct sk_buff *skb, __u32 offset)
{
u8 _optval, *op;
offset += skb_network_offset(skb);
op = skb_header_pointer(skb, offset, sizeof(_optval), &_optval);
if (!op)
return true;
return (*op & 0xC0) == 0x80;
}
void icmpv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
struct icmp6hdr *thdr, int len)
{
struct sk_buff *skb;
struct icmp6hdr *icmp6h;
skb = skb_peek(&sk->sk_write_queue);
if (!skb)
return;
icmp6h = icmp6_hdr(skb);
memcpy(icmp6h, thdr, sizeof(struct icmp6hdr));
icmp6h->icmp6_cksum = 0;
if (skb_queue_len(&sk->sk_write_queue) == 1) {
skb->csum = csum_partial(icmp6h,
sizeof(struct icmp6hdr), skb->csum);
icmp6h->icmp6_cksum = csum_ipv6_magic(&fl6->saddr,
&fl6->daddr,
len, fl6->flowi6_proto,
skb->csum);
} else {
__wsum tmp_csum = 0;
skb_queue_walk(&sk->sk_write_queue, skb) {
tmp_csum = csum_add(tmp_csum, skb->csum);
}
tmp_csum = csum_partial(icmp6h,
sizeof(struct icmp6hdr), tmp_csum);
icmp6h->icmp6_cksum = csum_ipv6_magic(&fl6->saddr,
&fl6->daddr,
len, fl6->flowi6_proto,
tmp_csum);
}
ip6_push_pending_frames(sk);
}
struct icmpv6_msg {
struct sk_buff *skb;
int offset;
uint8_t type;
};
static int icmpv6_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
{
struct icmpv6_msg *msg = (struct icmpv6_msg *) from;
struct sk_buff *org_skb = msg->skb;
__wsum csum;
csum = skb_copy_and_csum_bits(org_skb, msg->offset + offset,
to, len);
skb->csum = csum_block_add(skb->csum, csum, odd);
if (!(msg->type & ICMPV6_INFOMSG_MASK))
nf_ct_attach(skb, org_skb);
return 0;
}
#if IS_ENABLED(CONFIG_IPV6_MIP6)
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
static void mip6_addr_swap(struct sk_buff *skb, const struct inet6_skb_parm *opt)
{
struct ipv6hdr *iph = ipv6_hdr(skb);
struct ipv6_destopt_hao *hao;
int off;
if (opt->dsthao) {
off = ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO);
if (likely(off >= 0)) {
hao = (struct ipv6_destopt_hao *)
(skb_network_header(skb) + off);
swap(iph->saddr, hao->addr);
}
}
}
#else
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
static inline void mip6_addr_swap(struct sk_buff *skb, const struct inet6_skb_parm *opt) {}
#endif
static struct dst_entry *icmpv6_route_lookup(struct net *net,
struct sk_buff *skb,
struct sock *sk,
struct flowi6 *fl6)
{
struct dst_entry *dst, *dst2;
struct flowi6 fl2;
int err;
err = ip6_dst_lookup(net, sk, &dst, fl6);
if (err)
return ERR_PTR(err);
/*
* We won't send icmp if the destination is known
* anycast unless we need to treat anycast as unicast.
*/
if (!READ_ONCE(net->ipv6.sysctl.icmpv6_error_anycast_as_unicast) &&
ipv6_anycast_destination(dst, &fl6->daddr)) {
net_dbg_ratelimited("icmp6_send: acast source\n");
dst_release(dst);
return ERR_PTR(-EINVAL);
}
/* No need to clone since we're just using its address. */
dst2 = dst;
dst = xfrm_lookup(net, dst, flowi6_to_flowi(fl6), sk, 0);
if (!IS_ERR(dst)) {
if (dst != dst2)
return dst;
} else {
if (PTR_ERR(dst) == -EPERM)
dst = NULL;
else
return dst;
}
err = xfrm_decode_session_reverse(net, skb, flowi6_to_flowi(&fl2), AF_INET6);
if (err)
goto relookup_failed;
err = ip6_dst_lookup(net, sk, &dst2, &fl2);
if (err)
goto relookup_failed;
dst2 = xfrm_lookup(net, dst2, flowi6_to_flowi(&fl2), sk, XFRM_LOOKUP_ICMP);
if (!IS_ERR(dst2)) {
dst_release(dst);
dst = dst2;
} else {
err = PTR_ERR(dst2);
if (err == -EPERM) {
dst_release(dst);
return dst2;
} else
goto relookup_failed;
}
relookup_failed:
if (dst)
return dst;
return ERR_PTR(err);
}
static struct net_device *icmp6_dev(const struct sk_buff *skb)
{
struct net_device *dev = skb->dev;
/* for local traffic to local address, skb dev is the loopback
* device. Check if there is a dst attached to the skb and if so
* get the real device index. Same is needed for replies to a link
* local address on a device enslaved to an L3 master device
*/
if (unlikely(dev->ifindex == LOOPBACK_IFINDEX || netif_is_l3_master(skb->dev))) {
const struct rt6_info *rt6 = skb_rt6_info(skb);
icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev(). With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0)) For such a packet, we call ip6_route_input() to look up a route for the next destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv() If no route is found, ip6_null_entry is set to skb, and the following dst_input(skb) calls ip6_pkt_drop(). Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev as the input device is the loopback interface. Then, we have to check if skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref for ip6_null_entry. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f9dc751baea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffe98712c38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffe98712cf8 RCX: 00007f9dc751baea RDX: 0000000000000060 RSI: 00007f9dc6460b90 RDI: 0000000000000003 RBP: 00007f9dc56e8be0 R08: 00007ffe98712d70 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f9dc6af5d1b </TASK> Modules linked in: CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") Reported-by: Wang Yufen <wangyufen@huawei.com> Closes: https://lore.kernel.org/netdev/c41403a9-c2f6-3b7e-0c96-e1901e605cd0@huawei.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-08 01:43:27 +00:00
/* The destination could be an external IP in Ext Hdr (SRv6, RPL, etc.),
* and ip6_null_entry could be set to skb if no route is found.
*/
if (rt6 && rt6->rt6i_idev)
dev = rt6->rt6i_idev->dev;
}
return dev;
}
static int icmp6_iif(const struct sk_buff *skb)
{
return icmp6_dev(skb)->ifindex;
}
/*
* Send an ICMP message in response to a packet in error
*/
void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
const struct in6_addr *force_saddr,
const struct inet6_skb_parm *parm)
{
struct inet6_dev *idev = NULL;
struct ipv6hdr *hdr = ipv6_hdr(skb);
struct sock *sk;
struct net *net;
struct ipv6_pinfo *np;
const struct in6_addr *saddr = NULL;
bool apply_ratelimit = false;
struct dst_entry *dst;
struct icmp6hdr tmp_hdr;
struct flowi6 fl6;
struct icmpv6_msg msg;
struct ipcm6_cookie ipc6;
int iif = 0;
int addr_type = 0;
int len;
u32 mark;
if ((u8 *)hdr < skb->head ||
(skb_network_header(skb) + sizeof(*hdr)) > skb_tail_pointer(skb))
return;
if (!skb->dev)
return;
net = dev_net(skb->dev);
mark = IP6_REPLY_MARK(net, skb->mark);
/*
* Make sure we respect the rules
* i.e. RFC 1885 2.4(e)
* Rule (e.1) is enforced by not using icmp6_send
* in any code that processes icmp errors.
*/
addr_type = ipv6_addr_type(&hdr->daddr);
if (ipv6_chk_addr(net, &hdr->daddr, skb->dev, 0) ||
ipv6_chk_acast_addr_src(net, skb->dev, &hdr->daddr))
saddr = &hdr->daddr;
/*
* Dest addr check
*/
if (addr_type & IPV6_ADDR_MULTICAST || skb->pkt_type != PACKET_HOST) {
if (type != ICMPV6_PKT_TOOBIG &&
!(type == ICMPV6_PARAMPROB &&
code == ICMPV6_UNK_OPTION &&
(opt_unrec(skb, info))))
return;
saddr = NULL;
}
addr_type = ipv6_addr_type(&hdr->saddr);
/*
* Source addr check
*/
if (__ipv6_addr_needs_scope_id(addr_type)) {
iif = icmp6_iif(skb);
} else {
ipv6/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) As per RFC4443, the destination address field for ICMPv6 error messages is copied from the source address field of the invoking packet. In configurations with Virtual Routing and Forwarding tables, looking up which routing table to use for sending ICMPv6 error messages is currently done by using the destination net_device. If the source and destination interfaces are within separate VRFs, or one in the global routing table and the other in a VRF, looking up the source address of the invoking packet in the destination interface's routing table will fail if the destination interface's routing table contains no route to the invoking packet's source address. One observable effect of this issue is that traceroute6 does not work in the following cases: - Route leaking between global routing table and VRF - Route leaking between VRFs Use the source device routing table when sending ICMPv6 error messages. [ In the context of ipv4, it has been pointed out that a similar issue may exist with ICMP errors triggered when forwarding between network namespaces. It would be worthwhile to investigate whether ipv6 has similar issues, but is outside of the scope of this investigation. ] [ Testing shows that similar issues exist with ipv6 unreachable / fragmentation needed messages. However, investigation of this additional failure mode is beyond this investigation's scope. ] Link: https://tools.ietf.org/html/rfc4443 Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12 14:50:15 +00:00
/*
* The source device is used for looking up which routing table
* to use for sending an ICMP error.
*/
iif = l3mdev_master_ifindex(skb->dev);
net: handle no dst on skb in icmp6_send Andrey reported the following while fuzzing the kernel with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800666d4200 task.stack: ffff880067348000 RIP: 0010:[<ffffffff833617ec>] [<ffffffff833617ec>] icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451 RSP: 0018:ffff88006734f2c0 EFLAGS: 00010206 RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018 RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003 R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000 R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0 FS: 00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0 Stack: ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460 ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046 ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000 Call Trace: [<ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557 [< inline >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88 [<ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157 [<ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663 [<ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191 ... icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both cases the dst->dev should be preferred for determining the L3 domain if the dst has been set on the skb. Fallback to the skb->dev if it has not. This covers the case reported here where icmp6_send is invoked on Rx before the route lookup. Fixes: 5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28 02:52:53 +00:00
}
/*
* Must not send error if the source does not uniquely
* identify a single node (RFC2463 Section 2.4).
* We check unspecified / multicast addresses here,
* and anycast addresses will be checked later.
*/
if ((addr_type == IPV6_ADDR_ANY) || (addr_type & IPV6_ADDR_MULTICAST)) {
net_dbg_ratelimited("icmp6_send: addr_any/mcast source [%pI6c > %pI6c]\n",
&hdr->saddr, &hdr->daddr);
return;
}
/*
* Never answer to a ICMP packet.
*/
if (is_ineligible(skb)) {
net_dbg_ratelimited("icmp6_send: no reply to icmp error [%pI6c > %pI6c]\n",
&hdr->saddr, &hdr->daddr);
return;
}
/* Needed by both icmpv6_global_allow and icmpv6_xmit_lock */
local_bh_disable();
/* Check global sysctl_icmp_msgs_per_sec ratelimit */
if (!(skb->dev->flags & IFF_LOOPBACK) &&
!icmpv6_global_allow(net, type, &apply_ratelimit))
goto out_bh_enable;
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
mip6_addr_swap(skb, parm);
net: icmp6: provide input address for traceroute6 traceroute6 output can be confusing, in that it shows the address that a router would use to reach the sender, rather than the address the packet used to reach the router. Consider this case: ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route is through R1, and R1's default route is through R2 over N2. traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2. The script below can be used to reproduce this scenario. traceroute6 output without this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms 2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms traceroute6 output with this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms 2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms #!/bin/bash # # ------------------------ N2 # | | # ------ ------ N3 ---- # | R1 | | R2 |------|H2| # ------ ------ ---- # | | # ------------------------ N1 # | # ---- # |H1| # ---- # # N1: 2000:101::/64 # N2: 2000:102::/64 # N3: 2000:103::/64 # # R1's host part of address: 1 # R2's host part of address: 2 # H1's host part of address: 3 # H2's host part of address: 4 # # For example: # the IPv6 address of R1's interface on N2 is 2000:102::1/64 # # Nets are implemented by macvlan interfaces (bridge mode) over # dummy interfaces. # # Create net namespaces ip netns add host1 ip netns add host2 ip netns add rtr1 ip netns add rtr2 # Create nets ip link add net1 type dummy; ip link set net1 up ip link add net2 type dummy; ip link set net2 up ip link add net3 type dummy; ip link set net3 up # Add interfaces to net1, move them to their nemaspaces ip link add link net1 dev host1net1 type macvlan mode bridge ip link set host1net1 netns host1 ip link add link net1 dev rtr1net1 type macvlan mode bridge ip link set rtr1net1 netns rtr1 ip link add link net1 dev rtr2net1 type macvlan mode bridge ip link set rtr2net1 netns rtr2 # Add interfaces to net2, move them to their nemaspaces ip link add link net2 dev rtr1net2 type macvlan mode bridge ip link set rtr1net2 netns rtr1 ip link add link net2 dev rtr2net2 type macvlan mode bridge ip link set rtr2net2 netns rtr2 # Add interfaces to net3, move them to their nemaspaces ip link add link net3 dev rtr2net3 type macvlan mode bridge ip link set rtr2net3 netns rtr2 ip link add link net3 dev host2net3 type macvlan mode bridge ip link set host2net3 netns host2 # Configure interfaces and routes in host1 ip netns exec host1 ip link set lo up ip netns exec host1 ip link set host1net1 up ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1 ip netns exec host1 ip -6 route add default via 2000:101::1 # Configure interfaces and routes in rtr1 ip netns exec rtr1 ip link set lo up ip netns exec rtr1 ip link set rtr1net1 up ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1 ip netns exec rtr1 ip link set rtr1net2 up ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2 ip netns exec rtr1 ip -6 route add default via 2000:102::2 ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in rtr2 ip netns exec rtr2 ip link set lo up ip netns exec rtr2 ip link set rtr2net1 up ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1 ip netns exec rtr2 ip link set rtr2net2 up ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2 ip netns exec rtr2 ip link set rtr2net3 up ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3 ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in host2 ip netns exec host2 ip link set lo up ip netns exec host2 ip link set host2net3 up ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3 ip netns exec host2 ip -6 route add default via 2000:103::2 # Ping host2 from host1 ip netns exec host1 ping6 -c5 2000:103::4 # Traceroute host2 from host1 ip netns exec host1 traceroute6 2000:103::4 # Delete nets ip link del net3 ip link del net2 ip link del net1 # Delete namespaces ip netns del rtr2 ip netns del rtr1 ip netns del host2 ip netns del host1 Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Original-patch-by: Honggang Xu <hxu@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 00:40:02 +00:00
sk = icmpv6_xmit_lock(net);
if (!sk)
goto out_bh_enable;
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_proto = IPPROTO_ICMPV6;
fl6.daddr = hdr->saddr;
if (force_saddr)
saddr = force_saddr;
net: icmp6: provide input address for traceroute6 traceroute6 output can be confusing, in that it shows the address that a router would use to reach the sender, rather than the address the packet used to reach the router. Consider this case: ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route is through R1, and R1's default route is through R2 over N2. traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2. The script below can be used to reproduce this scenario. traceroute6 output without this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms 2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms traceroute6 output with this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms 2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms #!/bin/bash # # ------------------------ N2 # | | # ------ ------ N3 ---- # | R1 | | R2 |------|H2| # ------ ------ ---- # | | # ------------------------ N1 # | # ---- # |H1| # ---- # # N1: 2000:101::/64 # N2: 2000:102::/64 # N3: 2000:103::/64 # # R1's host part of address: 1 # R2's host part of address: 2 # H1's host part of address: 3 # H2's host part of address: 4 # # For example: # the IPv6 address of R1's interface on N2 is 2000:102::1/64 # # Nets are implemented by macvlan interfaces (bridge mode) over # dummy interfaces. # # Create net namespaces ip netns add host1 ip netns add host2 ip netns add rtr1 ip netns add rtr2 # Create nets ip link add net1 type dummy; ip link set net1 up ip link add net2 type dummy; ip link set net2 up ip link add net3 type dummy; ip link set net3 up # Add interfaces to net1, move them to their nemaspaces ip link add link net1 dev host1net1 type macvlan mode bridge ip link set host1net1 netns host1 ip link add link net1 dev rtr1net1 type macvlan mode bridge ip link set rtr1net1 netns rtr1 ip link add link net1 dev rtr2net1 type macvlan mode bridge ip link set rtr2net1 netns rtr2 # Add interfaces to net2, move them to their nemaspaces ip link add link net2 dev rtr1net2 type macvlan mode bridge ip link set rtr1net2 netns rtr1 ip link add link net2 dev rtr2net2 type macvlan mode bridge ip link set rtr2net2 netns rtr2 # Add interfaces to net3, move them to their nemaspaces ip link add link net3 dev rtr2net3 type macvlan mode bridge ip link set rtr2net3 netns rtr2 ip link add link net3 dev host2net3 type macvlan mode bridge ip link set host2net3 netns host2 # Configure interfaces and routes in host1 ip netns exec host1 ip link set lo up ip netns exec host1 ip link set host1net1 up ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1 ip netns exec host1 ip -6 route add default via 2000:101::1 # Configure interfaces and routes in rtr1 ip netns exec rtr1 ip link set lo up ip netns exec rtr1 ip link set rtr1net1 up ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1 ip netns exec rtr1 ip link set rtr1net2 up ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2 ip netns exec rtr1 ip -6 route add default via 2000:102::2 ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in rtr2 ip netns exec rtr2 ip link set lo up ip netns exec rtr2 ip link set rtr2net1 up ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1 ip netns exec rtr2 ip link set rtr2net2 up ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2 ip netns exec rtr2 ip link set rtr2net3 up ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3 ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in host2 ip netns exec host2 ip link set lo up ip netns exec host2 ip link set host2net3 up ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3 ip netns exec host2 ip -6 route add default via 2000:103::2 # Ping host2 from host1 ip netns exec host1 ping6 -c5 2000:103::4 # Traceroute host2 from host1 ip netns exec host1 traceroute6 2000:103::4 # Delete nets ip link del net3 ip link del net2 ip link del net1 # Delete namespaces ip netns del rtr2 ip netns del rtr1 ip netns del host2 ip netns del host1 Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Original-patch-by: Honggang Xu <hxu@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 00:40:02 +00:00
if (saddr) {
fl6.saddr = *saddr;
net: icmp6: do not select saddr from iif when route has prefsrc set Since commit fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") ICMPv6 errors have source addresses from the ingress interface. However, this overrides when source address selection is influenced by setting preferred source addresses on routes. This can result in ICMP errors being lost to upstream BCP38 filters when the wrong source addresses are used, breaking path MTU discovery and traceroute. This patch sets the modified source address selection to only take place when the route used has no prefsrc set. It can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8::3 dev v1 nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip addr add 2001:db8:100::1 dev lo ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1 ip route add 2001:db8:1000::1 via 2001:db8::2 traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute6 -s 2001:db8::3 2001:db8:1000::1 ip netns delete test Output before: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.843 ms !N 0.396 ms !N 0.257 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.772 ms !N 0.257 ms !N 0.357 ms !N After: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8:100::1 (2001:db8:100::1) 8.885 ms !N 0.310 ms !N 0.174 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 1.403 ms !N 0.205 ms !N 0.313 ms !N Fixes: fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03 20:22:57 +00:00
} else if (!icmpv6_rt_has_prefsrc(sk, type, &fl6)) {
net: icmp6: provide input address for traceroute6 traceroute6 output can be confusing, in that it shows the address that a router would use to reach the sender, rather than the address the packet used to reach the router. Consider this case: ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route is through R1, and R1's default route is through R2 over N2. traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2. The script below can be used to reproduce this scenario. traceroute6 output without this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms 2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms traceroute6 output with this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms 2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms #!/bin/bash # # ------------------------ N2 # | | # ------ ------ N3 ---- # | R1 | | R2 |------|H2| # ------ ------ ---- # | | # ------------------------ N1 # | # ---- # |H1| # ---- # # N1: 2000:101::/64 # N2: 2000:102::/64 # N3: 2000:103::/64 # # R1's host part of address: 1 # R2's host part of address: 2 # H1's host part of address: 3 # H2's host part of address: 4 # # For example: # the IPv6 address of R1's interface on N2 is 2000:102::1/64 # # Nets are implemented by macvlan interfaces (bridge mode) over # dummy interfaces. # # Create net namespaces ip netns add host1 ip netns add host2 ip netns add rtr1 ip netns add rtr2 # Create nets ip link add net1 type dummy; ip link set net1 up ip link add net2 type dummy; ip link set net2 up ip link add net3 type dummy; ip link set net3 up # Add interfaces to net1, move them to their nemaspaces ip link add link net1 dev host1net1 type macvlan mode bridge ip link set host1net1 netns host1 ip link add link net1 dev rtr1net1 type macvlan mode bridge ip link set rtr1net1 netns rtr1 ip link add link net1 dev rtr2net1 type macvlan mode bridge ip link set rtr2net1 netns rtr2 # Add interfaces to net2, move them to their nemaspaces ip link add link net2 dev rtr1net2 type macvlan mode bridge ip link set rtr1net2 netns rtr1 ip link add link net2 dev rtr2net2 type macvlan mode bridge ip link set rtr2net2 netns rtr2 # Add interfaces to net3, move them to their nemaspaces ip link add link net3 dev rtr2net3 type macvlan mode bridge ip link set rtr2net3 netns rtr2 ip link add link net3 dev host2net3 type macvlan mode bridge ip link set host2net3 netns host2 # Configure interfaces and routes in host1 ip netns exec host1 ip link set lo up ip netns exec host1 ip link set host1net1 up ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1 ip netns exec host1 ip -6 route add default via 2000:101::1 # Configure interfaces and routes in rtr1 ip netns exec rtr1 ip link set lo up ip netns exec rtr1 ip link set rtr1net1 up ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1 ip netns exec rtr1 ip link set rtr1net2 up ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2 ip netns exec rtr1 ip -6 route add default via 2000:102::2 ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in rtr2 ip netns exec rtr2 ip link set lo up ip netns exec rtr2 ip link set rtr2net1 up ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1 ip netns exec rtr2 ip link set rtr2net2 up ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2 ip netns exec rtr2 ip link set rtr2net3 up ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3 ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in host2 ip netns exec host2 ip link set lo up ip netns exec host2 ip link set host2net3 up ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3 ip netns exec host2 ip -6 route add default via 2000:103::2 # Ping host2 from host1 ip netns exec host1 ping6 -c5 2000:103::4 # Traceroute host2 from host1 ip netns exec host1 traceroute6 2000:103::4 # Delete nets ip link del net3 ip link del net2 ip link del net1 # Delete namespaces ip netns del rtr2 ip netns del rtr1 ip netns del host2 ip netns del host1 Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Original-patch-by: Honggang Xu <hxu@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 00:40:02 +00:00
/* select a more meaningful saddr from input if */
struct net_device *in_netdev;
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
in_netdev = dev_get_by_index(net, parm->iif);
net: icmp6: provide input address for traceroute6 traceroute6 output can be confusing, in that it shows the address that a router would use to reach the sender, rather than the address the packet used to reach the router. Consider this case: ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route is through R1, and R1's default route is through R2 over N2. traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2. The script below can be used to reproduce this scenario. traceroute6 output without this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms 2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms traceroute6 output with this patch: traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets 1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms 2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms 3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms #!/bin/bash # # ------------------------ N2 # | | # ------ ------ N3 ---- # | R1 | | R2 |------|H2| # ------ ------ ---- # | | # ------------------------ N1 # | # ---- # |H1| # ---- # # N1: 2000:101::/64 # N2: 2000:102::/64 # N3: 2000:103::/64 # # R1's host part of address: 1 # R2's host part of address: 2 # H1's host part of address: 3 # H2's host part of address: 4 # # For example: # the IPv6 address of R1's interface on N2 is 2000:102::1/64 # # Nets are implemented by macvlan interfaces (bridge mode) over # dummy interfaces. # # Create net namespaces ip netns add host1 ip netns add host2 ip netns add rtr1 ip netns add rtr2 # Create nets ip link add net1 type dummy; ip link set net1 up ip link add net2 type dummy; ip link set net2 up ip link add net3 type dummy; ip link set net3 up # Add interfaces to net1, move them to their nemaspaces ip link add link net1 dev host1net1 type macvlan mode bridge ip link set host1net1 netns host1 ip link add link net1 dev rtr1net1 type macvlan mode bridge ip link set rtr1net1 netns rtr1 ip link add link net1 dev rtr2net1 type macvlan mode bridge ip link set rtr2net1 netns rtr2 # Add interfaces to net2, move them to their nemaspaces ip link add link net2 dev rtr1net2 type macvlan mode bridge ip link set rtr1net2 netns rtr1 ip link add link net2 dev rtr2net2 type macvlan mode bridge ip link set rtr2net2 netns rtr2 # Add interfaces to net3, move them to their nemaspaces ip link add link net3 dev rtr2net3 type macvlan mode bridge ip link set rtr2net3 netns rtr2 ip link add link net3 dev host2net3 type macvlan mode bridge ip link set host2net3 netns host2 # Configure interfaces and routes in host1 ip netns exec host1 ip link set lo up ip netns exec host1 ip link set host1net1 up ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1 ip netns exec host1 ip -6 route add default via 2000:101::1 # Configure interfaces and routes in rtr1 ip netns exec rtr1 ip link set lo up ip netns exec rtr1 ip link set rtr1net1 up ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1 ip netns exec rtr1 ip link set rtr1net2 up ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2 ip netns exec rtr1 ip -6 route add default via 2000:102::2 ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in rtr2 ip netns exec rtr2 ip link set lo up ip netns exec rtr2 ip link set rtr2net1 up ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1 ip netns exec rtr2 ip link set rtr2net2 up ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2 ip netns exec rtr2 ip link set rtr2net3 up ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3 ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1 # Configure interfaces and routes in host2 ip netns exec host2 ip link set lo up ip netns exec host2 ip link set host2net3 up ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3 ip netns exec host2 ip -6 route add default via 2000:103::2 # Ping host2 from host1 ip netns exec host1 ping6 -c5 2000:103::4 # Traceroute host2 from host1 ip netns exec host1 traceroute6 2000:103::4 # Delete nets ip link del net3 ip link del net2 ip link del net1 # Delete namespaces ip netns del rtr2 ip netns del rtr1 ip netns del host2 ip netns del host1 Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Original-patch-by: Honggang Xu <hxu@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 00:40:02 +00:00
if (in_netdev) {
ipv6_dev_get_saddr(net, in_netdev, &fl6.daddr,
inet6_sk(sk)->srcprefs,
&fl6.saddr);
dev_put(in_netdev);
}
}
fl6.flowi6_mark = mark;
fl6.flowi6_oif = iif;
fl6.fl6_icmp_type = type;
fl6.fl6_icmp_code = code;
fl6.flowi6_uid = sock_net_uid(net, NULL);
fl6.mp_hash = rt6_multipath_hash(net, &fl6, skb, NULL);
security_skb_classify_flow(skb, flowi6_to_flowi_common(&fl6));
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
np = inet6_sk(sk);
if (!icmpv6_xrlim_allow(sk, type, &fl6, apply_ratelimit))
goto out;
tmp_hdr.icmp6_type = type;
tmp_hdr.icmp6_code = code;
tmp_hdr.icmp6_cksum = 0;
tmp_hdr.icmp6_pointer = htonl(info);
if (!fl6.flowi6_oif && ipv6_addr_is_multicast(&fl6.daddr))
fl6.flowi6_oif = READ_ONCE(np->mcast_oif);
else if (!fl6.flowi6_oif)
fl6.flowi6_oif = READ_ONCE(np->ucast_oif);
ipcm6_init_sk(&ipc6, sk);
ipc6.sockc.mark = mark;
fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
dst = icmpv6_route_lookup(net, skb, sk, &fl6);
if (IS_ERR(dst))
goto out;
ipc6.hlimit = ip6_sk_dst_hoplimit(np, &fl6, dst);
msg.skb = skb;
msg.offset = skb_network_offset(skb);
msg.type = type;
len = skb->len - msg.offset;
len = min_t(unsigned int, len, IPV6_MIN_MTU - sizeof(struct ipv6hdr) - sizeof(struct icmp6hdr));
if (len < 0) {
net_dbg_ratelimited("icmp: len problem [%pI6c > %pI6c]\n",
&hdr->saddr, &hdr->daddr);
goto out_dst_release;
}
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
if (ip6_append_data(sk, icmpv6_getfrag, &msg,
len + sizeof(struct icmp6hdr),
sizeof(struct icmp6hdr),
&ipc6, &fl6, dst_rt6_info(dst),
MSG_DONTWAIT)) {
ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
icmpv6_push_pending_frames(sk, &fl6, &tmp_hdr,
len + sizeof(struct icmp6hdr));
}
rcu_read_unlock();
out_dst_release:
dst_release(dst);
out:
icmpv6_xmit_unlock(sk);
out_bh_enable:
local_bh_enable();
}
EXPORT_SYMBOL(icmp6_send);
/* Slightly more convenient version of icmp6_send with drop reasons.
*/
void icmpv6_param_prob_reason(struct sk_buff *skb, u8 code, int pos,
enum skb_drop_reason reason)
{
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
icmp6_send(skb, ICMPV6_PARAMPROB, code, pos, NULL, IP6CB(skb));
kfree_skb_reason(skb, reason);
}
/* Generate icmpv6 with type/code ICMPV6_DEST_UNREACH/ICMPV6_ADDR_UNREACH
* if sufficient data bytes are available
* @nhs is the size of the tunnel header(s) :
* Either an IPv4 header for SIT encap
* an IPv4 header + GRE header for GRE encap
*/
int ip6_err_gen_icmpv6_unreach(struct sk_buff *skb, int nhs, int type,
unsigned int data_len)
{
struct in6_addr temp_saddr;
struct rt6_info *rt;
struct sk_buff *skb2;
u32 info = 0;
if (!pskb_may_pull(skb, nhs + sizeof(struct ipv6hdr) + 8))
return 1;
/* RFC 4884 (partial) support for ICMP extensions */
if (data_len < 128 || (data_len & 7) || skb->len < data_len)
data_len = 0;
skb2 = data_len ? skb_copy(skb, GFP_ATOMIC) : skb_clone(skb, GFP_ATOMIC);
if (!skb2)
return 1;
skb_dst_drop(skb2);
skb_pull(skb2, nhs);
skb_reset_network_header(skb2);
rt = rt6_lookup(dev_net(skb->dev), &ipv6_hdr(skb2)->saddr, NULL, 0,
skb, 0);
if (rt && rt->dst.dev)
skb2->dev = rt->dst.dev;
ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr, &temp_saddr);
if (data_len) {
/* RFC 4884 (partial) support :
* insert 0 padding at the end, before the extensions
*/
__skb_push(skb2, nhs);
skb_reset_network_header(skb2);
memmove(skb2->data, skb2->data + nhs, data_len - nhs);
memset(skb2->data + data_len - nhs, 0, nhs);
/* RFC 4884 4.5 : Length is measured in 64-bit words,
* and stored in reserved[0]
*/
info = (data_len/8) << 24;
}
if (type == ICMP_TIME_EXCEEDED)
icmp6_send(skb2, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT,
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
info, &temp_saddr, IP6CB(skb2));
else
icmp6_send(skb2, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH,
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 13:18:58 +00:00
info, &temp_saddr, IP6CB(skb2));
if (rt)
ip6_rt_put(rt);
kfree_skb(skb2);
return 0;
}
EXPORT_SYMBOL(ip6_err_gen_icmpv6_unreach);
static enum skb_drop_reason icmpv6_echo_reply(struct sk_buff *skb)
{
struct net *net = dev_net(skb->dev);
struct sock *sk;
struct inet6_dev *idev;
struct ipv6_pinfo *np;
const struct in6_addr *saddr = NULL;
struct icmp6hdr *icmph = icmp6_hdr(skb);
bool apply_ratelimit = false;
struct icmp6hdr tmp_hdr;
struct flowi6 fl6;
struct icmpv6_msg msg;
struct dst_entry *dst;
struct ipcm6_cookie ipc6;
u32 mark = IP6_REPLY_MARK(net, skb->mark);
SKB_DR(reason);
bool acast;
u8 type;
if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr) &&
net->ipv6.sysctl.icmpv6_echo_ignore_multicast)
return reason;
saddr = &ipv6_hdr(skb)->daddr;
acast = ipv6_anycast_destination(skb_dst(skb), saddr);
if (acast && net->ipv6.sysctl.icmpv6_echo_ignore_anycast)
return reason;
if (!ipv6_unicast_destination(skb) &&
!(net->ipv6.sysctl.anycast_src_echo_reply && acast))
saddr = NULL;
if (icmph->icmp6_type == ICMPV6_EXT_ECHO_REQUEST)
type = ICMPV6_EXT_ECHO_REPLY;
else
type = ICMPV6_ECHO_REPLY;
memcpy(&tmp_hdr, icmph, sizeof(tmp_hdr));
tmp_hdr.icmp6_type = type;
memset(&fl6, 0, sizeof(fl6));
if (net->ipv6.sysctl.flowlabel_reflect & FLOWLABEL_REFLECT_ICMPV6_ECHO_REPLIES)
fl6.flowlabel = ip6_flowlabel(ipv6_hdr(skb));
fl6.flowi6_proto = IPPROTO_ICMPV6;
fl6.daddr = ipv6_hdr(skb)->saddr;
if (saddr)
fl6.saddr = *saddr;
fl6.flowi6_oif = icmp6_iif(skb);
fl6.fl6_icmp_type = type;
fl6.flowi6_mark = mark;
fl6.flowi6_uid = sock_net_uid(net, NULL);
security_skb_classify_flow(skb, flowi6_to_flowi_common(&fl6));
local_bh_disable();
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
sk = icmpv6_xmit_lock(net);
if (!sk)
goto out_bh_enable;
icmp: icmp_sk() should not use smp_processor_id() in preemptible code Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 11:43:33 +00:00
np = inet6_sk(sk);
if (!fl6.flowi6_oif && ipv6_addr_is_multicast(&fl6.daddr))
fl6.flowi6_oif = READ_ONCE(np->mcast_oif);
else if (!fl6.flowi6_oif)
fl6.flowi6_oif = READ_ONCE(np->ucast_oif);
if (ip6_dst_lookup(net, sk, &dst, &fl6))
goto out;
dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), sk, 0);
if (IS_ERR(dst))
goto out;
/* Check the ratelimit */
if ((!(skb->dev->flags & IFF_LOOPBACK) &&
!icmpv6_global_allow(net, ICMPV6_ECHO_REPLY, &apply_ratelimit)) ||
!icmpv6_xrlim_allow(sk, ICMPV6_ECHO_REPLY, &fl6, apply_ratelimit))
goto out_dst_release;
idev = __in6_dev_get(skb->dev);
msg.skb = skb;
msg.offset = 0;
msg.type = type;
ipcm6_init_sk(&ipc6, sk);
ipc6.hlimit = ip6_sk_dst_hoplimit(np, &fl6, dst);
ipc6.tclass = ipv6_get_dsfield(ipv6_hdr(skb));
ipc6.sockc.mark = mark;
if (icmph->icmp6_type == ICMPV6_EXT_ECHO_REQUEST)
if (!icmp_build_probe(skb, (struct icmphdr *)&tmp_hdr))
goto out_dst_release;
if (ip6_append_data(sk, icmpv6_getfrag, &msg,
skb->len + sizeof(struct icmp6hdr),
sizeof(struct icmp6hdr), &ipc6, &fl6,
dst_rt6_info(dst), MSG_DONTWAIT)) {
__ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
icmpv6_push_pending_frames(sk, &fl6, &tmp_hdr,
skb->len + sizeof(struct icmp6hdr));
reason = SKB_CONSUMED;
}
out_dst_release:
dst_release(dst);
out:
icmpv6_xmit_unlock(sk);
out_bh_enable:
local_bh_enable();
return reason;
}
enum skb_drop_reason icmpv6_notify(struct sk_buff *skb, u8 type,
u8 code, __be32 info)
{
2022-01-03 17:11:31 +00:00
struct inet6_skb_parm *opt = IP6CB(skb);
struct net *net = dev_net(skb->dev);
const struct inet6_protocol *ipprot;
enum skb_drop_reason reason;
int inner_offset;
__be16 frag_off;
u8 nexthdr;
reason = pskb_may_pull_reason(skb, sizeof(struct ipv6hdr));
if (reason != SKB_NOT_DROPPED_YET)
goto out;
2022-01-03 17:11:31 +00:00
seg6_icmp_srh(skb, opt);
nexthdr = ((struct ipv6hdr *)skb->data)->nexthdr;
if (ipv6_ext_hdr(nexthdr)) {
/* now skip over extension headers */
inner_offset = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr),
&nexthdr, &frag_off);
if (inner_offset < 0) {
SKB_DR_SET(reason, IPV6_BAD_EXTHDR);
goto out;
}
} else {
inner_offset = sizeof(struct ipv6hdr);
}
/* Checkin header including 8 bytes of inner protocol header. */
reason = pskb_may_pull_reason(skb, inner_offset + 8);
if (reason != SKB_NOT_DROPPED_YET)
goto out;
/* BUGGG_FUTURE: we should try to parse exthdrs in this packet.
Without this we will not able f.e. to make source routed
pmtu discovery.
Corresponding argument (opt) to notifiers is already added.
--ANK (980726)
*/
ipprot = rcu_dereference(inet6_protos[nexthdr]);
if (ipprot && ipprot->err_handler)
2022-01-03 17:11:31 +00:00
ipprot->err_handler(skb, opt, type, code, inner_offset, info);
raw6_icmp_error(skb, nexthdr, type, code, inner_offset, info);
return SKB_CONSUMED;
out:
__ICMP6_INC_STATS(net, __in6_dev_get(skb->dev), ICMP6_MIB_INERRORS);
return reason;
}
/*
* Handle icmp messages
*/
static int icmpv6_rcv(struct sk_buff *skb)
{
enum skb_drop_reason reason = SKB_DROP_REASON_NOT_SPECIFIED;
struct net *net = dev_net(skb->dev);
struct net_device *dev = icmp6_dev(skb);
struct inet6_dev *idev = __in6_dev_get(dev);
const struct in6_addr *saddr, *daddr;
struct icmp6hdr *hdr;
u8 type;
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
struct sec_path *sp = skb_sec_path(skb);
int nh;
if (!(sp && sp->xvec[sp->len - 1]->props.flags &
XFRM_STATE_ICMP)) {
reason = SKB_DROP_REASON_XFRM_POLICY;
goto drop_no_count;
}
if (!pskb_may_pull(skb, sizeof(*hdr) + sizeof(struct ipv6hdr)))
goto drop_no_count;
nh = skb_network_offset(skb);
skb_set_network_header(skb, sizeof(*hdr));
if (!xfrm6_policy_check_reverse(NULL, XFRM_POLICY_IN,
skb)) {
reason = SKB_DROP_REASON_XFRM_POLICY;
goto drop_no_count;
}
skb_set_network_header(skb, nh);
}
__ICMP6_INC_STATS(dev_net(dev), idev, ICMP6_MIB_INMSGS);
saddr = &ipv6_hdr(skb)->saddr;
daddr = &ipv6_hdr(skb)->daddr;
if (skb_checksum_validate(skb, IPPROTO_ICMPV6, ip6_compute_pseudo)) {
net_dbg_ratelimited("ICMPv6 checksum failed [%pI6c > %pI6c]\n",
saddr, daddr);
goto csum_error;
}
if (!pskb_pull(skb, sizeof(*hdr)))
goto discard_it;
hdr = icmp6_hdr(skb);
type = hdr->icmp6_type;
ICMP6MSGIN_INC_STATS(dev_net(dev), idev, type);
switch (type) {
case ICMPV6_ECHO_REQUEST:
if (!net->ipv6.sysctl.icmpv6_echo_ignore_all)
reason = icmpv6_echo_reply(skb);
break;
case ICMPV6_EXT_ECHO_REQUEST:
if (!net->ipv6.sysctl.icmpv6_echo_ignore_all &&
READ_ONCE(net->ipv4.sysctl_icmp_echo_enable_probe))
reason = icmpv6_echo_reply(skb);
break;
case ICMPV6_ECHO_REPLY:
reason = ping_rcv(skb);
break;
case ICMPV6_EXT_ECHO_REPLY:
reason = ping_rcv(skb);
break;
case ICMPV6_PKT_TOOBIG:
/* BUGGG_FUTURE: if packet contains rthdr, we cannot update
standard destination cache. Seems, only "advanced"
destination cache will allow to solve this problem
--ANK (980726)
*/
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto discard_it;
hdr = icmp6_hdr(skb);
/* to notify */
fallthrough;
case ICMPV6_DEST_UNREACH:
case ICMPV6_TIME_EXCEED:
case ICMPV6_PARAMPROB:
reason = icmpv6_notify(skb, type, hdr->icmp6_code,
hdr->icmp6_mtu);
break;
case NDISC_ROUTER_SOLICITATION:
case NDISC_ROUTER_ADVERTISEMENT:
case NDISC_NEIGHBOUR_SOLICITATION:
case NDISC_NEIGHBOUR_ADVERTISEMENT:
case NDISC_REDIRECT:
reason = ndisc_rcv(skb);
break;
case ICMPV6_MGM_QUERY:
igmp6_event_query(skb);
return 0;
case ICMPV6_MGM_REPORT:
igmp6_event_report(skb);
return 0;
case ICMPV6_MGM_REDUCTION:
case ICMPV6_NI_QUERY:
case ICMPV6_NI_REPLY:
case ICMPV6_MLD2_REPORT:
case ICMPV6_DHAAD_REQUEST:
case ICMPV6_DHAAD_REPLY:
case ICMPV6_MOBILE_PREFIX_SOL:
case ICMPV6_MOBILE_PREFIX_ADV:
break;
default:
/* informational */
if (type & ICMPV6_INFOMSG_MASK)
break;
net_dbg_ratelimited("icmpv6: msg of unknown type [%pI6c > %pI6c]\n",
saddr, daddr);
/*
* error of unknown type.
* must pass to upper level
*/
reason = icmpv6_notify(skb, type, hdr->icmp6_code,
hdr->icmp6_mtu);
}
/* until the v6 path can be better sorted assume failure and
* preserve the status quo behaviour for the rest of the paths to here
*/
if (reason)
kfree_skb_reason(skb, reason);
else
consume_skb(skb);
return 0;
csum_error:
reason = SKB_DROP_REASON_ICMP_CSUM;
__ICMP6_INC_STATS(dev_net(dev), idev, ICMP6_MIB_CSUMERRORS);
discard_it:
__ICMP6_INC_STATS(dev_net(dev), idev, ICMP6_MIB_INERRORS);
drop_no_count:
kfree_skb_reason(skb, reason);
return 0;
}
void icmpv6_flow_init(const struct sock *sk, struct flowi6 *fl6, u8 type,
const struct in6_addr *saddr,
const struct in6_addr *daddr, int oif)
{
memset(fl6, 0, sizeof(*fl6));
fl6->saddr = *saddr;
fl6->daddr = *daddr;
fl6->flowi6_proto = IPPROTO_ICMPV6;
fl6->fl6_icmp_type = type;
fl6->fl6_icmp_code = 0;
fl6->flowi6_oif = oif;
security_sk_classify_flow(sk, flowi6_to_flowi_common(fl6));
}
int __init icmpv6_init(void)
{
struct sock *sk;
int err, i;
for_each_possible_cpu(i) {
err = inet_ctl_sock_create(&sk, PF_INET6,
SOCK_RAW, IPPROTO_ICMPV6, &init_net);
if (err < 0) {
pr_err("Failed to initialize the ICMP6 control socket (err %d)\n",
err);
return err;
}
per_cpu(ipv6_icmp_sk, i) = sk;
/* Enough space for 2 64K ICMP packets, including
* sk_buff struct overhead.
*/
sk->sk_sndbuf = 2 * SKB_TRUESIZE(64 * 1024);
}
err = -EAGAIN;
if (inet6_add_protocol(&icmpv6_protocol, IPPROTO_ICMPV6) < 0)
goto fail;
err = inet6_register_icmp_sender(icmp6_send);
if (err)
goto sender_reg_err;
return 0;
sender_reg_err:
inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6);
fail:
pr_err("Failed to register ICMP6 protocol\n");
return err;
}
void icmpv6_cleanup(void)
{
inet6_unregister_icmp_sender(icmp6_send);
inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6);
}
static const struct icmp6_err {
int err;
int fatal;
} tab_unreach[] = {
{ /* NOROUTE */
.err = ENETUNREACH,
.fatal = 0,
},
{ /* ADM_PROHIBITED */
.err = EACCES,
.fatal = 1,
},
{ /* Was NOT_NEIGHBOUR, now reserved */
.err = EHOSTUNREACH,
.fatal = 0,
},
{ /* ADDR_UNREACH */
.err = EHOSTUNREACH,
.fatal = 0,
},
{ /* PORT_UNREACH */
.err = ECONNREFUSED,
.fatal = 1,
},
{ /* POLICY_FAIL */
.err = EACCES,
.fatal = 1,
},
{ /* REJECT_ROUTE */
.err = EACCES,
.fatal = 1,
},
};
int icmpv6_err_convert(u8 type, u8 code, int *err)
{
int fatal = 0;
*err = EPROTO;
switch (type) {
case ICMPV6_DEST_UNREACH:
fatal = 1;
if (code < ARRAY_SIZE(tab_unreach)) {
*err = tab_unreach[code].err;
fatal = tab_unreach[code].fatal;
}
break;
case ICMPV6_PKT_TOOBIG:
*err = EMSGSIZE;
break;
case ICMPV6_PARAMPROB:
*err = EPROTO;
fatal = 1;
break;
case ICMPV6_TIME_EXCEED:
*err = EHOSTUNREACH;
break;
}
return fatal;
}
EXPORT_SYMBOL(icmpv6_err_convert);
#ifdef CONFIG_SYSCTL
static struct ctl_table ipv6_icmp_table_template[] = {
{
.procname = "ratelimit",
.data = &init_net.ipv6.sysctl.icmpv6_time,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_ms_jiffies,
},
{
.procname = "echo_ignore_all",
.data = &init_net.ipv6.sysctl.icmpv6_echo_ignore_all,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
},
{
.procname = "echo_ignore_multicast",
.data = &init_net.ipv6.sysctl.icmpv6_echo_ignore_multicast,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
},
{
.procname = "echo_ignore_anycast",
.data = &init_net.ipv6.sysctl.icmpv6_echo_ignore_anycast,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
},
{
.procname = "ratemask",
.data = &init_net.ipv6.sysctl.icmpv6_ratemask_ptr,
.maxlen = ICMPV6_MSG_MAX + 1,
.mode = 0644,
.proc_handler = proc_do_large_bitmap,
},
{
.procname = "error_anycast_as_unicast",
.data = &init_net.ipv6.sysctl.icmpv6_error_anycast_as_unicast,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
},
};
struct ctl_table * __net_init ipv6_icmp_sysctl_init(struct net *net)
{
struct ctl_table *table;
table = kmemdup(ipv6_icmp_table_template,
sizeof(ipv6_icmp_table_template),
GFP_KERNEL);
if (table) {
table[0].data = &net->ipv6.sysctl.icmpv6_time;
table[1].data = &net->ipv6.sysctl.icmpv6_echo_ignore_all;
table[2].data = &net->ipv6.sysctl.icmpv6_echo_ignore_multicast;
table[3].data = &net->ipv6.sysctl.icmpv6_echo_ignore_anycast;
table[4].data = &net->ipv6.sysctl.icmpv6_ratemask_ptr;
table[5].data = &net->ipv6.sysctl.icmpv6_error_anycast_as_unicast;
}
return table;
}
size_t ipv6_icmp_sysctl_table_size(void)
{
return ARRAY_SIZE(ipv6_icmp_table_template);
}
#endif