linux/drivers/soc/samsung/exynos-chipid.c

150 lines
3.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
* Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
*
* Exynos - CHIP ID support
* Author: Pankaj Dubey <pankaj.dubey@samsung.com>
* Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
* Author: Krzysztof Kozlowski <krzk@kernel.org>
*
* Samsung Exynos SoC Adaptive Supply Voltage and Chip ID support
*/
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/soc/samsung/exynos-chipid.h>
#include <linux/sys_soc.h>
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
#include "exynos-asv.h"
static const struct exynos_soc_id {
const char *name;
unsigned int id;
} soc_ids[] = {
/* List ordered by SoC name */
{ "EXYNOS3250", 0xE3472000 },
{ "EXYNOS4210", 0x43200000 }, /* EVT0 revision */
{ "EXYNOS4210", 0x43210000 },
{ "EXYNOS4212", 0x43220000 },
{ "EXYNOS4412", 0xE4412000 },
{ "EXYNOS5250", 0x43520000 },
{ "EXYNOS5260", 0xE5260000 },
{ "EXYNOS5410", 0xE5410000 },
{ "EXYNOS5420", 0xE5420000 },
{ "EXYNOS5433", 0xE5433000 },
{ "EXYNOS5440", 0xE5440000 },
{ "EXYNOS5800", 0xE5422000 },
{ "EXYNOS7420", 0xE7420000 },
};
static const char *product_id_to_soc_id(unsigned int product_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(soc_ids); i++)
if ((product_id & EXYNOS_MASK) == soc_ids[i].id)
return soc_ids[i].name;
return NULL;
}
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
static int exynos_chipid_probe(struct platform_device *pdev)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device_node *root;
struct regmap *regmap;
u32 product_id;
u32 revision;
int ret;
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
regmap = device_node_to_regmap(pdev->dev.of_node);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = regmap_read(regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id);
if (ret < 0)
return ret;
revision = product_id & EXYNOS_REV_MASK;
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
GFP_KERNEL);
if (!soc_dev_attr)
return -ENOMEM;
soc_dev_attr->family = "Samsung Exynos";
root = of_find_node_by_path("/");
of_property_read_string(root, "model", &soc_dev_attr->machine);
of_node_put(root);
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL,
"%x", revision);
soc_dev_attr->soc_id = product_id_to_soc_id(product_id);
if (!soc_dev_attr->soc_id) {
pr_err("Unknown SoC\n");
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
return -ENODEV;
}
/* please note that the actual registration will be deferred */
soc_dev = soc_device_register(soc_dev_attr);
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
if (IS_ERR(soc_dev))
return PTR_ERR(soc_dev);
ret = exynos_asv_init(&pdev->dev, regmap);
if (ret)
goto err;
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
platform_set_drvdata(pdev, soc_dev);
dev_info(&pdev->dev, "Exynos: CPU[%s] PRO_ID[0x%x] REV[0x%x] Detected\n",
soc_dev_attr->soc_id, product_id, revision);
return 0;
err:
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
soc_device_unregister(soc_dev);
return ret;
}
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
static int exynos_chipid_remove(struct platform_device *pdev)
{
struct soc_device *soc_dev = platform_get_drvdata(pdev);
soc_device_unregister(soc_dev);
return 0;
}
static const struct of_device_id exynos_chipid_of_device_ids[] = {
{ .compatible = "samsung,exynos4210-chipid" },
{}
};
MODULE_DEVICE_TABLE(of, exynos_chipid_of_device_ids);
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv The Exynos Chip ID driver on Exynos SoCs has so far only informational purpose - to expose the SoC device in sysfs. No other drivers depend on it so there is really no benefit of initializing it early. The code would be the most flexible if converted to a regular driver. However there is already another driver - Exynos ASV (Adaptive Supply Voltage) - which binds to the device node of Chip ID. The solution is to convert the Exynos Chip ID to a built in driver and merge the Exynos ASV into it. This has several benefits: 1. Although the Exynos ASV driver binds to a device node present in all Exynos DTS (generic compatible), it fails to probe except on the supported ones (only Exynos5422). This means that the regular boot process has a planned/normal device probe failure. Merging the ASV into Chip ID will remove this probe failure because the final driver will always bind, just with disabled ASV features. 2. Allows to use dev_info() as the SoC bus is present (since core_initcall). 3. Could speed things up because of execution of Chip ID code in a SMP environment (after bringing up secondary CPUs, unlike early_initcall), This reduces the amount of work to be done early, when the kernel has to bring up critical devices. 5. Makes the Chip ID code defer-probe friendly, Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
2020-12-07 18:54:57 +00:00
static struct platform_driver exynos_chipid_driver = {
.driver = {
.name = "exynos-chipid",
.of_match_table = exynos_chipid_of_device_ids,
},
.probe = exynos_chipid_probe,
.remove = exynos_chipid_remove,
};
module_platform_driver(exynos_chipid_driver);
MODULE_DESCRIPTION("Samsung Exynos ChipID controller and ASV driver");
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>");
MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
MODULE_LICENSE("GPL");