ASoC: Updates for v6.8

This is a relatively quiet release, there's a lot of driver specific changes and the usual high level of activity in the SOF core but the one big core change was Mormioto-san's work to support more N:M CPU:CODEC mapping cases. Highlights include: - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2. - Support for falling back to older SOF IPC versions where firmware for new versions is not available. - Support for notification of control changes generated by SOF firmware with IPC4. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases). - ACPI parsing support for the ES83xx driver, reducing the number of quirks neede for x86 systems. - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100. - Removal of Freescale MPC8610 support, the SoC is no longer supported by Linux. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbJ5EACgkQJNaLcl1U h9CZTwf/c8CPwoKABZear8jiQpZLUhFLuGQwSShPYVZ7XPzzTMp9BwVmd40DCnUi NeSc22t2UgT0H06nx3QK8sKOhrpQoBQVrIajf2AaxD44TJbsOYGGe4pMh1sXKAMF c0ybp8uRgsjiv2Y++SBXZLexGC11/b8eTFLV1nTK/i2nygGjbfWSJ9s4PpB9V6cA nZrQ/p+x/ZwaBejFUnvE06M7GHtCD6lxrB9Q1EmWA4RxcW7RNUtIN5gr16HlaMiC 3gix4mg40llhBFF9s4eBjRBNKL2paiejPZwcYkAC8w+SkZ/roXaeN55g0avmDWyW AN9o096vaEVWKhZ/jdTHmFVf2PV2Iw== =rbT5 -----END PGP SIGNATURE----- Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.8 This is a relatively quiet release, there's a lot of driver specific changes and the usual high level of activity in the SOF core but the one big core change was Mormioto-san's work to support more N:M CPU:CODEC mapping cases. Highlights include: - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2. - Support for falling back to older SOF IPC versions where firmware for new versions is not available. - Support for notification of control changes generated by SOF firmware with IPC4. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases). - ACPI parsing support for the ES83xx driver, reducing the number of quirks neede for x86 systems. - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100. - Removal of Freescale MPC8610 support, the SoC is no longer supported by Linux.
2025-01-01 10:43:43 +00:00 · 2024-01-08 08:18:02 +01:00 · 2024-01-08 08:18:02 +01:00 · 0205f3753d
commit 0205f3753d
parent 821e2ac632 67508b8748
480 changed files with 8593 additions and 7004 deletions
--- a/Documentation/arch/loongarch/introduction.rst
+++ b/Documentation/arch/loongarch/introduction.rst
@ -375,9 +375,9 @@ Developer web site of Loongson and LoongArch (Software and Documentation):

 Documentation of LoongArch ISA:

-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-CN.pdf (in Chinese)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-CN.pdf (in Chinese)

-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-EN.pdf (in English)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-EN.pdf (in English)

 Documentation of LoongArch ELF psABI:

--- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
@ -39,7 +39,7 @@ unevaluatedProperties: false

 examples:
  - |
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
        #address-cells = <2>;
        #size-cells = <0>;
        reg = <0x3250000 0x2000>;
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@ -19,6 +19,12 @@ definitions:
    properties:
      mclk-fs:
        $ref: simple-card.yaml#/definitions/mclk-fs
+      playback-only:
+        description: port connection used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+      capture-only:
+        description: port connection used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag

  endpoint-base:
    allOf:
--- a/Documentation/devicetree/bindings/sound/es8328.txt
+++ b/Documentation/devicetree/bindings/sound/es8328.txt
@ -1,38 +0,0 @@
-Everest ES8328 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-  - compatible  : Should be "everest,es8328" or "everest,es8388"
-  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
-  - AVDD-supply : Regulator providing analog supply voltage 3.3V
-  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
-  - IPVDD-supply : Regulator providing analog output voltage 3.3V
-  - clocks : A 22.5792 or 11.2896 MHz clock
-  - reg : the I2C address of the device for I2C, the chip select number for SPI
-
-Pins on the device (for linking into audio routes):
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * LINPUT1
-  * RINPUT1
-  * LINPUT2
-  * RINPUT2
-  * Mic Bias
-
-
-Example:
-
-codec: es8328@11 {
-	compatible = "everest,es8328";
-	DVDD-supply = <&reg_3p3v>;
-	AVDD-supply = <&reg_3p3v>;
-	PVDD-supply = <&reg_3p3v>;
-	HPVDD-supply = <&reg_3p3v>;
-	clocks = <&clks 169>;
-	reg = <0x11>;
-};
--- a/Documentation/devicetree/bindings/sound/everest,es8328.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es8328.yaml
@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+  Everest Audio Codec, which can be connected via I2C or SPI.
+  Pins on the device (for linking into audio routes) are
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    enum:
+      - everest,es8328
+      - everest,es8388
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: A 22.5792 or 11.2896 MHz clock
+
+  DVDD-supply:
+    description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+  AVDD-supply:
+    description: Regulator providing analog supply voltage 3.3V
+
+  PVDD-supply:
+    description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+  HPVDD-supply:
+    description: Regulator providing analog output voltage 3.3V
+
+required:
+  - compatible
+  - clocks
+  - DVDD-supply
+  - AVDD-supply
+  - PVDD-supply
+  - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8328: codec@11 {
+        compatible = "everest,es8328";
+        reg = <0x11>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+        HPVDD-supply = <&reg_3p3v>;
+        PVDD-supply = <&reg_3p3v>;
+        clocks = <&clks 169>;
+      };
+    };
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@ -1,36 +0,0 @@
-fsl,mqs audio CODEC
-
-Required properties:
-  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
-  - clocks : A list of phandles + clock-specifiers, one for each entry in
-	     clock-names
-  - clock-names : "mclk" - must required.
-		  "core" - required if compatible is "fsl,imx8qm-mqs", it
-		           is for register access.
-  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
-	  Required if compatible is "fsl,imx6sx-mqs".
-
-Required if compatible is "fsl,imx8qm-mqs":
-  - power-domains: A phandle of PM domain provider node.
-  - reg: Offset and length of the register set for the device.
-
-Example:
-
-mqs: mqs {
-	compatible = "fsl,imx6sx-mqs";
-	gpr = <&gpr>;
-	clocks = <&clks IMX6SX_CLK_SAI1>;
-	clock-names = "mclk";
-	status = "disabled";
-};
-
-mqs: mqs@59850000 {
-	compatible = "fsl,imx8qm-mqs";
-	reg = <0x59850000 0x10000>;
-	clocks = <&clk IMX8QM_AUD_MQS_IPG>,
-		 <&clk IMX8QM_AUD_MQS_HMCLK>;
-	clock-names = "core", "mclk";
-	power-domains = <&pd_mqs0>;
-	status = "disabled";
-};
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+  Medium quality sound (MQS) is used to generate medium quality audio
+  via a standard GPIO in the pinmux, allowing the user to connect
+  stereo speakers or headphones to a power amplifier without an
+  additional DAC chip.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mqs
+      - fsl,imx8qm-mqs
+      - fsl,imx8qxp-mqs
+      - fsl,imx93-mqs
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-mqs
+              - fsl,imx8qxp-mqs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+            - description: Clock for register access
+        clock-names:
+          items:
+            - const: mclk
+            - const: core
+      required:
+        - reg
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+        clock-names:
+          items:
+            - const: mclk
+      required:
+        - gpr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    mqs0: mqs {
+        compatible = "fsl,imx6sx-mqs";
+        gpr = <&gpr>;
+        clocks = <&clks IMX6SX_CLK_SAI1>;
+        clock-names = "mclk";
+    };
+
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mqs1: mqs@59850000 {
+        compatible = "fsl,imx8qm-mqs";
+        reg = <0x59850000 0x10000>;
+        clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+        clock-names = "mclk", "core";
+        power-domains = <&pd IMX_SC_R_MQS_0>;
+    };
--- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@ -38,7 +38,10 @@ properties:
      - const: txfifo

  interrupts:
-    maxItems: 1
+    items:
+      - description: WAKEUPMIX Audio XCVR Interrupt 1
+      - description: WAKEUPMIX Audio XCVR Interrupt 2
+    minItems: 1

  clocks:
    items:
@ -78,6 +81,23 @@ required:
  - dma-names
  - resets

+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false

 examples:
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@ -15,6 +15,7 @@ allOf:
 properties:
  compatible:
    enum:
+      - mediatek,mt8188-es8326
      - mediatek,mt8188-mt6359-evb
      - mediatek,mt8188-nau8825
      - mediatek,mt8188-rt5682s
--- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@ -89,6 +89,14 @@ properties:
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 3072000

+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
  nuvoton,left-input-single-end:
    description: Enable left input with single-ended settings if set.
        For the headset mic application, the single-ended control is
@ -127,6 +135,7 @@ examples:
            nuvoton,jack-insert-debounce = <7>;
            nuvoton,jack-eject-debounce = <0>;
            nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate = <0>;
            #sound-dai-cells = <0>;
        };
    };
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@ -11,12 +11,18 @@ maintainers:

 properties:
  compatible:
-    enum:
-      - qcom,sc7280-lpass-rx-macro
-      - qcom,sm8250-lpass-rx-macro
-      - qcom,sm8450-lpass-rx-macro
-      - qcom,sm8550-lpass-rx-macro
-      - qcom,sc8280xp-lpass-rx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-rx-macro
+          - qcom,sm8250-lpass-rx-macro
+          - qcom,sm8450-lpass-rx-macro
+          - qcom,sm8550-lpass-rx-macro
+          - qcom,sc8280xp-lpass-rx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-rx-macro
+              - qcom,x1e80100-lpass-rx-macro
+          - const: qcom,sm8550-lpass-rx-macro

  reg:
    maxItems: 1
@ -96,8 +102,9 @@ allOf:
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm8550-lpass-rx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-rx-macro
    then:
      properties:
        clocks:
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@ -11,13 +11,19 @@ maintainers:

 properties:
  compatible:
-    enum:
-      - qcom,sc7280-lpass-tx-macro
-      - qcom,sm6115-lpass-tx-macro
-      - qcom,sm8250-lpass-tx-macro
-      - qcom,sm8450-lpass-tx-macro
-      - qcom,sm8550-lpass-tx-macro
-      - qcom,sc8280xp-lpass-tx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-tx-macro
+          - qcom,sm6115-lpass-tx-macro
+          - qcom,sm8250-lpass-tx-macro
+          - qcom,sm8450-lpass-tx-macro
+          - qcom,sm8550-lpass-tx-macro
+          - qcom,sc8280xp-lpass-tx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-tx-macro
+              - qcom,x1e80100-lpass-tx-macro
+          - const: qcom,sm8550-lpass-tx-macro

  reg:
    maxItems: 1
@ -118,8 +124,9 @@ allOf:
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm8550-lpass-tx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-tx-macro
    then:
      properties:
        clocks:
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@ -11,12 +11,18 @@ maintainers:

 properties:
  compatible:
-    enum:
-      - qcom,sc7280-lpass-va-macro
-      - qcom,sm8250-lpass-va-macro
-      - qcom,sm8450-lpass-va-macro
-      - qcom,sm8550-lpass-va-macro
-      - qcom,sc8280xp-lpass-va-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-va-macro
+          - qcom,sm8250-lpass-va-macro
+          - qcom,sm8450-lpass-va-macro
+          - qcom,sm8550-lpass-va-macro
+          - qcom,sc8280xp-lpass-va-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-va-macro
+              - qcom,x1e80100-lpass-va-macro
+          - const: qcom,sm8550-lpass-va-macro

  reg:
    maxItems: 1
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@ -11,12 +11,18 @@ maintainers:

 properties:
  compatible:
-    enum:
-      - qcom,sc7280-lpass-wsa-macro
-      - qcom,sm8250-lpass-wsa-macro
-      - qcom,sm8450-lpass-wsa-macro
-      - qcom,sm8550-lpass-wsa-macro
-      - qcom,sc8280xp-lpass-wsa-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-wsa-macro
+          - qcom,sm8250-lpass-wsa-macro
+          - qcom,sm8450-lpass-wsa-macro
+          - qcom,sm8550-lpass-wsa-macro
+          - qcom,sc8280xp-lpass-wsa-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-wsa-macro
+              - qcom,x1e80100-lpass-wsa-macro
+          - const: qcom,sm8550-lpass-wsa-macro

  reg:
    maxItems: 1
@ -94,8 +100,9 @@ allOf:
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm8550-lpass-wsa-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-wsa-macro
    then:
      properties:
        clocks:
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@ -21,6 +21,11 @@ properties:
              - lenovo,yoga-c630-sndcard
              - qcom,db845c-sndcard
          - const: qcom,sdm845-sndcard
+      - items:
+          - enum:
+              - qcom,sm8550-sndcard
+              - qcom,sm8650-sndcard
+          - const: qcom,sm8450-sndcard
      - enum:
          - qcom,apq8016-sbc-sndcard
          - qcom,msm8916-qdsp6-sndcard
@ -30,6 +35,7 @@ properties:
          - qcom,sdm845-sndcard
          - qcom,sm8250-sndcard
          - qcom,sm8450-sndcard
+          - qcom,x1e80100-sndcard

  audio-routing:
    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@ -201,9 +201,9 @@ examples:
  - |
    codec@1,0{
        compatible = "slim217,250";
-        reg  = <1 0>;
+        reg = <1 0>;
        reset-gpios = <&tlmm 64 0>;
-        slim-ifc-dev  = <&wcd9340_ifd>;
+        slim-ifc-dev = <&wcd9340_ifd>;
        #sound-dai-cells = <1>;
        interrupt-parent = <&tlmm>;
        interrupts = <54 4>;
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@ -51,7 +51,7 @@ examples:
        reg = <0x03210000 0x2000>;
        wcd938x_rx: codec@0,4 {
            compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
            qcom,rx-port-mapping = <1 2 3 4 5>;
        };
    };
@ -62,7 +62,7 @@ examples:
        reg = <0x03230000 0x2000>;
        wcd938x_tx: codec@0,3 {
            compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
            qcom,tx-port-mapping = <2 3 4 5>;
        };
    };
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@ -137,7 +137,7 @@ examples:
        reg = <0x03210000 0x2000>;
        wcd938x_rx: codec@0,4 {
            compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
            qcom,rx-port-mapping = <1 2 3 4 5>;
        };
    };
@ -148,7 +148,7 @@ examples:
        reg = <0x03230000 0x2000>;
        wcd938x_tx: codec@0,3 {
            compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
            qcom,tx-port-mapping = <2 3 4 5>;
        };
    };
--- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@ -52,7 +52,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

-    soundwire-controller@3250000 {
+    soundwire@3250000 {
        #address-cells = <2>;
        #size-cells = <0>;
        reg = <0x3250000 0x2000>;
--- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@ -48,7 +48,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

-    soundwire-controller {
+    soundwire {
        #address-cells = <2>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@ -9,20 +9,6 @@ title: Renesas R-Car Sound Driver
 maintainers:
  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

-definitions:
-  port-def:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        $ref: audio-graph-port.yaml#/definitions/endpoint-base
-        properties:
-          playback:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-          capture:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-        unevaluatedProperties: false
-
 properties:

  compatible:
@ -125,7 +111,17 @@ properties:

  # ports is below
  port:
-    $ref: "#/definitions/port-def"
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false

  rcar_sound,dvc:
    description: DVC subnode.
@ -269,7 +265,7 @@ patternProperties:
    unevaluatedProperties: false
    patternProperties:
      '^port(@[0-9a-f]+)?$':
-        $ref: "#/definitions/port-def"
+        $ref: "#/properties/port"

 required:
  - compatible
@ -501,19 +497,19 @@ examples:
        rcar_sound,dai {
            dai0 {
                playback = <&ssi5>, <&src5>;
-                capture  = <&ssi6>;
+                capture = <&ssi6>;
            };
            dai1 {
                playback = <&ssi3>;
            };
            dai2 {
-                capture  = <&ssi4>;
+                capture = <&ssi4>;
            };
            dai3 {
                playback = <&ssi7>;
            };
            dai4 {
-                capture  = <&ssi8>;
+                capture = <&ssi8>;
            };
        };

@ -527,7 +523,7 @@ examples:
                frame-master = <&rsnd_endpoint0>;

                playback = <&ssi0>, <&src0>, <&dvc0>;
-                capture  = <&ssi1>, <&src1>, <&dvc1>;
+                capture = <&ssi1>, <&src1>, <&dvc1>;
            };
        };
    };
--- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@ -16,7 +16,7 @@ properties:
  compatible:
    items:
      - enum:
-          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g043-ssi  # RZ/G2UL and RZ/Five
          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
          - renesas,r9a07g054-ssi  # RZ/V2L
      - const: renesas,rz-ssi
--- a/Documentation/devicetree/bindings/sound/sound-card-common.yaml
+++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
@ -17,6 +17,13 @@ properties:
      pair of strings, the first being the connection's sink, the second
      being the connection's source.

+  ignore-suspend-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of audio sound widgets which are marked ignoring system suspend.
+      Paths between these endpoints are still active over suspend of the main
+      application processor that the current operating system is running.
+
  model:
    $ref: /schemas/types.yaml#/definitions/string
    description: User specified audio sound card name
--- a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@ -90,7 +90,7 @@ examples:
        ldoin-supply = <&reg_3v3>;
        clocks = <&clks 201>;
        clock-names = "mclk";
-        aic32x4-gpio-func= <
+        aic32x4-gpio-func = <
          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
          0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
--- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@ -36,7 +36,11 @@ properties:

  vdd-supply:
    description:
-      VDD power supply to the hub
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub

  peer-hub:
    $ref: /schemas/types.yaml#/definitions/phandle
@ -62,6 +66,7 @@ allOf:
      properties:
        reset-gpios: false
        vdd-supply: false
+        vdd2-supply: false
        peer-hub: false
        i2c-bus: false
    else:
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@ -521,8 +521,8 @@ examples:

            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
            interrupt-names = "hs_phy_irq", "ss_phy_irq",
                          "dm_hs_phy_irq", "dp_hs_phy_irq";

--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@ -41,7 +41,7 @@ examples:
  - |
    usb {
        phys = <&usb2_phy1>, <&usb3_phy1>;
-        phy-names = "usb";
+        phy-names = "usb2", "usb3";
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/filesystems/erofs.rst
+++ b/Documentation/filesystems/erofs.rst
@ -91,6 +91,10 @@ compatibility checking tool (fsck.erofs), and a debugging tool (dump.erofs):

 - git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git

+For more information, please also refer to the documentation site:
+
+- https://erofs.docs.kernel.org
+
 Bugs and patches are welcome, please kindly help us and send to the following
 linux-erofs mailing list:

--- a/Documentation/process/maintainer-netdev.rst
+++ b/Documentation/process/maintainer-netdev.rst
@ -193,9 +193,23 @@ Review timelines
 Generally speaking, the patches get triaged quickly (in less than
 48h). But be patient, if your patch is active in patchwork (i.e. it's
 listed on the project's patch list) the chances it was missed are close to zero.
-Asking the maintainer for status updates on your
-patch is a good way to ensure your patch is ignored or pushed to the
-bottom of the priority list.
+
+The high volume of development on netdev makes reviewers move on
+from discussions relatively quickly. New comments and replies
+are very unlikely to arrive after a week of silence. If a patch
+is no longer active in patchwork and the thread went idle for more
+than a week - clarify the next steps and/or post the next version.
+
+For RFC postings specifically, if nobody responded in a week - reviewers
+either missed the posting or have no strong opinions. If the code is ready,
+repost as a PATCH.
+
+Emails saying just "ping" or "bump" are considered rude. If you can't figure
+out the status of the patch from patchwork or where the discussion has
+landed - describe your best guess and ask if it's correct. For example::
+
+  I don't understand what the next steps are. Person X seems to be unhappy
+  with A, should I do B and repost the patches?

 .. _Changes requested:

--- a/Documentation/sound/soc/dapm.rst
+++ b/Documentation/sound/soc/dapm.rst
@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::

-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),

 This can be used to merge to signal paths together in software.

--- a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst
+++ b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst
@ -338,9 +338,9 @@ Loongson与LoongArch的开发者网站（软件与文档资源）：

 LoongArch指令集架构的文档：

-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-CN.pdf （中文版）
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-CN.pdf （中文版）

-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-EN.pdf （英文版）
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-EN.pdf （英文版）

 LoongArch的ELF psABI文档：

--- a/10
+++ b/10
@ -7855,6 +7855,7 @@ R:	Yue Hu <huyue2@coolpad.com>
 R:	Jeffle Xu <jefflexu@linux.alibaba.com>
 L:	linux-erofs@lists.ozlabs.org
 S:	Maintained
+W:	https://erofs.docs.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
 F:	Documentation/ABI/testing/sysfs-fs-erofs
 F:	Documentation/filesystems/erofs.rst
@ -8584,7 +8585,6 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/imx*
-F:	sound/soc/fsl/mpc8610_hpcd.c

 FREESCALE SOC SOUND QMC DRIVER
 M:	Herve Codina <herve.codina@bootlin.com>
@ -11027,7 +11027,6 @@ F:	drivers/net/wireless/intel/iwlwifi/

 INTEL WMI SLIM BOOTLOADER (SBL) FIRMWARE UPDATE DRIVER
 M:	Jithu Joseph <jithu.joseph@intel.com>
-R:	Maurice Ma <maurice.ma@intel.com>
 S:	Maintained
 W:	https://slimbootloader.github.io/security/firmware-update.html
 F:	drivers/platform/x86/intel/wmi/sbl-fw-update.c
@ -13781,7 +13780,6 @@ F:	drivers/net/ethernet/mellanox/mlxfw/
 MELLANOX HARDWARE PLATFORM SUPPORT
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-M:	Mark Gross <markgross@kernel.org>
 M:	Vadim Pasternak <vadimp@nvidia.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Supported
@ -14390,7 +14388,6 @@ F:	drivers/platform/surface/surface_gpe.c
 MICROSOFT SURFACE HARDWARE PLATFORM SUPPORT
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-M:	Mark Gross <markgross@kernel.org>
 M:	Maximilian Luz <luzmaximilian@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@ -14997,6 +14994,7 @@ M:	Jakub Kicinski <kuba@kernel.org>
 M:	Paolo Abeni <pabeni@redhat.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+P:	Documentation/process/maintainer-netdev.rst
 Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
@ -15048,6 +15046,7 @@ M:	Jakub Kicinski <kuba@kernel.org>
 M:	Paolo Abeni <pabeni@redhat.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+P:	Documentation/process/maintainer-netdev.rst
 Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 B:	mailto:netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
@ -15058,6 +15057,7 @@ F:	Documentation/networking/
 F:	Documentation/process/maintainer-netdev.rst
 F:	Documentation/userspace-api/netlink/
 F:	include/linux/in.h
+F:	include/linux/indirect_call_wrapper.h
 F:	include/linux/net.h
 F:	include/linux/netdevice.h
 F:	include/net/
@ -22081,6 +22081,7 @@ F:	drivers/watchdog/tqmx86_wdt.c
 TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Masami Hiramatsu <mhiramat@kernel.org>
+R:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-trace-kernel@vger.kernel.org
 S:	Maintained
@ -23667,7 +23668,6 @@ F:	drivers/platform/x86/x86-android-tablets/
 X86 PLATFORM DRIVERS
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-M:	Mark Gross <markgross@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/platform-driver-x86/list/
--- a/2
+++ b/2
@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma ninja sloth

 # *DOCUMENTATION*
--- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@ -446,7 +446,7 @@ lvp0 {
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@ -88,7 +88,7 @@ static void __init edb93xx_register_i2c(void)
 * EDB93xx SPI peripheral handling
 *************************************************************************/
 static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
+	/* Intentionally left blank */
 };

 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
@ -114,14 +114,38 @@ static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 	/* Intentionally left blank */
 };

+static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init edb93xx_register_spi(void)
 {
 	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table);
 	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table);
 	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table);

 	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
 	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@ -164,7 +164,7 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 * SPI CS4271 Audio Codec
 *************************************************************************/
 static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+	/* Intentionally left blank */
 };

 /*************************************************************************
@ -241,6 +241,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	},
 };

+static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = {
+	.dev_id = "spi0.0", /* cs4271 @ CS0 */
+	.table = {
+		/* RESET */
+		GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
 	.dev_id = "spi0",
 	.table = {
@ -292,6 +301,7 @@ static void __init vision_init_machine(void)

 	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
+	gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@ -32,9 +32,18 @@

 #include "crag6410.h"

+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };

 static struct spi_board_info wm1253_devs[] = {
@ -61,10 +70,19 @@ static struct spi_board_info balblair_devs[] = {
 	},
 };

+static struct gpiod_lookup_table wm5100_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("wm5100", 3,
+			    "hp-pol", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,

 	.in_mode = {
 		WM5100_IN_DIFF,
@ -73,7 +91,6 @@ static struct wm5100_pdata wm5100_pdata = {
 		WM5100_IN_SE,
 	},

-	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
@ -110,9 +127,16 @@ static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	},
 };

+static struct gpiod_lookup_table wm8996_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,
@ -296,12 +320,20 @@ static const struct i2c_board_info wm6230_i2c_devs[] = {
 };

 static struct wm2200_pdata wm2200_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_defaults = {
 		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
 	},
 };

+static struct gpiod_lookup_table wm2200_gpiod_table = {
+	.dev_id = "1-003a", /* Device 003a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static const struct i2c_board_info wm2200_i2c[] = {
 	{ I2C_BOARD_INFO("wm2200", 0x3a),
 	  .platform_data = &wm2200_pdata, },
@ -337,18 +369,21 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
 	  .spi_devs = balblair_devs,
 	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
 	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs),
+	  .gpiod_table = &wm8996_gpiod_table },
 	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs),
+	  .gpiod_table = &wm5100_gpiod_table },
 	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
@ -362,7 +397,8 @@ static const struct {
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
 	  .gpiod_table = &wm5102_gpiod_table },
 	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
-	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c),
+	  .gpiod_table = &wm2200_gpiod_table },
 };

 static int wlf_gf_module_probe(struct i2c_client *i2c)
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@ -39,8 +39,6 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>

-#include <sound/wm1250-ev1.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

@ -713,13 +711,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata = {
 	.disable_touch = true,
 };

-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+static struct gpiod_lookup_table crag_wm1250_ev1_gpiod_table = {
+	/* The WM1250-EV1 is device 0027 on I2C bus 1 */
+	.dev_id = "1-0027",
+	.table = {
+		GPIO_LOOKUP("GPION", 12, "clk-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 12, "clk-sel0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 13, "clk-sel1", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 14, "osr", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 8, "master", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };

@ -733,9 +734,7 @@ static struct i2c_board_info i2c_devs1[] = {
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27), },
 };

 static struct s3c2410_platform_i2c i2c1_pdata = {
@ -862,6 +861,7 @@ static void __init crag6410_machine_init(void)

 	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	gpiod_add_lookup_table(&crag_wm1250_ev1_gpiod_table);
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

 	samsung_keypad_set_platdata(&crag6410_keypad_data);
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@ -484,7 +484,8 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = alloc_percpu(struct vcpu_info);
+	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
+				       1 << fls(sizeof(struct vcpu_info) - 1));
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;

--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@ -158,7 +158,7 @@ endif

 all:	$(notdir $(KBUILD_IMAGE))

-
+vmlinuz.efi: Image
 Image vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@

--- a/arch/arm64/include/asm/setup.h
+++ b/arch/arm64/include/asm/setup.h
@ -21,9 +21,22 @@ static inline bool arch_parse_debug_rodata(char *arg)
 	extern bool rodata_enabled;
 	extern bool rodata_full;

-	if (arg && !strcmp(arg, "full")) {
+	if (!arg)
+		return false;
+
+	if (!strcmp(arg, "full")) {
+		rodata_enabled = rodata_full = true;
+		return true;
+	}
+
+	if (!strcmp(arg, "off")) {
+		rodata_enabled = rodata_full = false;
+		return true;
+	}
+
+	if (!strcmp(arg, "on")) {
 		rodata_enabled = true;
-		rodata_full = true;
+		rodata_full = false;
 		return true;
 	}

--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@ -29,8 +29,8 @@ bool can_set_direct_map(void)
 	 *
 	 * KFENCE pool requires page-granular mapping if initialized late.
 	 */
-	return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() ||
-		arm64_kfence_can_set_direct_map();
+	return rodata_full || debug_pagealloc_enabled() ||
+	       arm64_kfence_can_set_direct_map();
 }

 static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
@ -105,8 +105,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 * If we are manipulating read-only permissions, apply the same
 	 * change to the linear mapping of the pages that back this VM area.
 	 */
-	if (rodata_enabled &&
-	    rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
+	if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
 			    pgprot_val(clear_mask) == PTE_RDONLY)) {
 		for (i = 0; i < area->nr_pages; i++) {
 			__change_memory_common((u64)page_address(area->pages[i]),
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@ -68,6 +68,7 @@ LDFLAGS_vmlinux			+= -static -n -nostdlib
 ifdef CONFIG_AS_HAS_EXPLICIT_RELOCS
 cflags-y			+= $(call cc-option,-mexplicit-relocs)
 KBUILD_CFLAGS_KERNEL		+= $(call cc-option,-mdirect-extern-access)
+KBUILD_CFLAGS_KERNEL		+= $(call cc-option,-fdirect-access-external-data)
 KBUILD_AFLAGS_MODULE		+= $(call cc-option,-fno-direct-access-external-data)
 KBUILD_CFLAGS_MODULE		+= $(call cc-option,-fno-direct-access-external-data)
 KBUILD_AFLAGS_MODULE		+= $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax)
@ -142,6 +143,8 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg

 all:	$(notdir $(KBUILD_IMAGE))

+vmlinuz.efi: vmlinux.efi
+
 vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@

--- a/arch/loongarch/include/asm/asmmacro.h
+++ b/arch/loongarch/include/asm/asmmacro.h
@ -609,8 +609,7 @@
 	lu32i.d	\reg, 0
 	lu52i.d	\reg, \reg, 0
 	.pushsection ".la_abs", "aw", %progbits
-	768:
-	.dword	768b-766b
+	.dword	766b
 	.dword	\sym
 	.popsection
 #endif
--- a/arch/loongarch/include/asm/percpu.h
+++ b/arch/loongarch/include/asm/percpu.h
@ -40,13 +40,13 @@ static __always_inline unsigned long __percpu_##op(void *ptr,		\
 	switch (size) {							\
 	case 4:								\
 		__asm__ __volatile__(					\
-		"am"#asm_op".w"	" %[ret], %[val], %[ptr]	\n"		\
+		"am"#asm_op".w"	" %[ret], %[val], %[ptr]	\n"	\
 		: [ret] "=&r" (ret), [ptr] "+ZB"(*(u32 *)ptr)		\
 		: [val] "r" (val));					\
 		break;							\
 	case 8:								\
 		__asm__ __volatile__(					\
-		"am"#asm_op".d" " %[ret], %[val], %[ptr]	\n"		\
+		"am"#asm_op".d" " %[ret], %[val], %[ptr]	\n"	\
 		: [ret] "=&r" (ret), [ptr] "+ZB"(*(u64 *)ptr)		\
 		: [val] "r" (val));					\
 		break;							\
@ -63,7 +63,7 @@ PERCPU_OP(and, and, &)
 PERCPU_OP(or, or, |)
 #undef PERCPU_OP

-static __always_inline unsigned long __percpu_read(void *ptr, int size)
+static __always_inline unsigned long __percpu_read(void __percpu *ptr, int size)
 {
 	unsigned long ret;

@ -100,7 +100,7 @@ static __always_inline unsigned long __percpu_read(void *ptr, int size)
 	return ret;
 }

-static __always_inline void __percpu_write(void *ptr, unsigned long val, int size)
+static __always_inline void __percpu_write(void __percpu *ptr, unsigned long val, int size)
 {
 	switch (size) {
 	case 1:
@ -132,8 +132,7 @@ static __always_inline void __percpu_write(void *ptr, unsigned long val, int siz
 	}
 }

-static __always_inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
-						   int size)
+static __always_inline unsigned long __percpu_xchg(void *ptr, unsigned long val, int size)
 {
 	switch (size) {
 	case 1:
--- a/arch/loongarch/include/asm/setup.h
+++ b/arch/loongarch/include/asm/setup.h
@ -25,7 +25,7 @@ extern void set_merr_handler(unsigned long offset, void *addr, unsigned long len
 #ifdef CONFIG_RELOCATABLE

 struct rela_la_abs {
-	long offset;
+	long pc;
 	long symvalue;
 };

--- a/arch/loongarch/kernel/relocate.c
+++ b/arch/loongarch/kernel/relocate.c
@ -52,7 +52,7 @@ static inline void __init relocate_absolute(long random_offset)
 	for (p = begin; (void *)p < end; p++) {
 		long v = p->symvalue;
 		uint32_t lu12iw, ori, lu32id, lu52id;
-		union loongarch_instruction *insn = (void *)p - p->offset;
+		union loongarch_instruction *insn = (void *)p->pc;

 		lu12iw = (v >> 12) & 0xfffff;
 		ori    = v & 0xfff;
@ -102,6 +102,14 @@ static inline __init unsigned long get_random_boot(void)
 	return hash;
 }

+static int __init nokaslr(char *p)
+{
+	pr_info("KASLR is disabled.\n");
+
+	return 0; /* Print a notice and silence the boot warning */
+}
+early_param("nokaslr", nokaslr);
+
 static inline __init bool kaslr_disabled(void)
 {
 	char *str;
--- a/arch/loongarch/kernel/time.c
+++ b/arch/loongarch/kernel/time.c
@ -58,21 +58,6 @@ static int constant_set_state_oneshot(struct clock_event_device *evt)
 	return 0;
 }

-static int constant_set_state_oneshot_stopped(struct clock_event_device *evt)
-{
-	unsigned long timer_config;
-
-	raw_spin_lock(&state_lock);
-
-	timer_config = csr_read64(LOONGARCH_CSR_TCFG);
-	timer_config &= ~CSR_TCFG_EN;
-	csr_write64(timer_config, LOONGARCH_CSR_TCFG);
-
-	raw_spin_unlock(&state_lock);
-
-	return 0;
-}
-
 static int constant_set_state_periodic(struct clock_event_device *evt)
 {
 	unsigned long period;
@ -92,6 +77,16 @@ static int constant_set_state_periodic(struct clock_event_device *evt)

 static int constant_set_state_shutdown(struct clock_event_device *evt)
 {
+	unsigned long timer_config;
+
+	raw_spin_lock(&state_lock);
+
+	timer_config = csr_read64(LOONGARCH_CSR_TCFG);
+	timer_config &= ~CSR_TCFG_EN;
+	csr_write64(timer_config, LOONGARCH_CSR_TCFG);
+
+	raw_spin_unlock(&state_lock);
+
 	return 0;
 }

@ -161,7 +156,7 @@ int constant_clockevent_init(void)
 	cd->rating = 320;
 	cd->cpumask = cpumask_of(cpu);
 	cd->set_state_oneshot = constant_set_state_oneshot;
-	cd->set_state_oneshot_stopped = constant_set_state_oneshot_stopped;
+	cd->set_state_oneshot_stopped = constant_set_state_shutdown;
 	cd->set_state_periodic = constant_set_state_periodic;
 	cd->set_state_shutdown = constant_set_state_shutdown;
 	cd->set_next_event = constant_timer_next_event;
--- a/arch/loongarch/mm/pgtable.c
+++ b/arch/loongarch/mm/pgtable.c
@ -13,13 +13,13 @@ struct page *dmw_virt_to_page(unsigned long kaddr)
 {
 	return pfn_to_page(virt_to_pfn(kaddr));
 }
-EXPORT_SYMBOL_GPL(dmw_virt_to_page);
+EXPORT_SYMBOL(dmw_virt_to_page);

 struct page *tlb_virt_to_page(unsigned long kaddr)
 {
 	return pfn_to_page(pte_pfn(*virt_to_kpte(kaddr)));
 }
-EXPORT_SYMBOL_GPL(tlb_virt_to_page);
+EXPORT_SYMBOL(tlb_virt_to_page);

 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@ -115,9 +115,12 @@ config ARCH_HAS_ILOG2_U64
 	default n

 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
+	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
+
+config GENERIC_BUG_RELATIVE_POINTERS
+	bool

 config GENERIC_HWEIGHT
 	bool
--- a/arch/parisc/include/asm/alternative.h
+++ b/arch/parisc/include/asm/alternative.h
@ -34,7 +34,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,

 /* Alternative SMP implementation. */
 #define ALTERNATIVE(cond, replacement)		"!0:"	\
-	".section .altinstructions, \"aw\"	!"	\
+	".section .altinstructions, \"a\"	!"	\
+	".align 4				!"	\
 	".word (0b-4-.)				!"	\
 	".hword 1, " __stringify(cond) "	!"	\
 	".word " __stringify(replacement) "	!"	\
@ -44,7 +45,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,

 /* to replace one single instructions by a new instruction */
 #define ALTERNATIVE(from, to, cond, replacement)\
-	.section .altinstructions, "aw"	!	\
+	.section .altinstructions, "a"	!	\
+	.align 4			!	\
 	.word (from - .)		!	\
 	.hword (to - from)/4, cond	!	\
 	.word replacement		!	\
@ -52,7 +54,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,

 /* to replace multiple instructions by new code */
 #define ALTERNATIVE_CODE(from, num_instructions, cond, new_instr_ptr)\
-	.section .altinstructions, "aw"	!	\
+	.section .altinstructions, "a"	!	\
+	.align 4			!	\
 	.word (from - .)		!	\
 	.hword -num_instructions, cond	!	\
 	.word (new_instr_ptr - .)	!	\
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@ -574,6 +574,7 @@
 	 */
 #define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr)	\
 	.section __ex_table,"aw"			!	\
+	.align 4					!	\
 	.word (fault_addr - .), (except_addr - .)	!	\
 	.previous

--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@ -17,24 +17,27 @@
 #define	PARISC_BUG_BREAK_ASM	"break 0x1f, 0x1fff"
 #define	PARISC_BUG_BREAK_INSN	0x03ffe01f  /* PARISC_BUG_BREAK_ASM */

-#if defined(CONFIG_64BIT)
-#define ASM_WORD_INSN		".dword\t"
+#ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
+# define __BUG_REL(val) ".word " __stringify(val) " - ."
 #else
-#define ASM_WORD_INSN		".word\t"
+# define __BUG_REL(val) ".word " __stringify(val)
 #endif

+
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 #define BUG()								\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
-			     "\t.short %c1, %c2\n"			\
-			     "\t.org 2b+%c3\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
+			     "\t.short %1, %2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
-			     "i" (0), "i" (sizeof(struct bug_entry)) ); \
+			     "i" (0), "i" (sizeof(struct bug_entry)) );	\
 		unreachable();						\
 	} while(0)

@ -51,10 +54,12 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
-			     "\t.short %c1, %c2\n"			\
-			     "\t.org 2b+%c3\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
+			     "\t.short %1, %2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
 			     "i" (BUGFLAG_WARNING|(flags)),		\
@ -65,10 +70,11 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b\n"		\
-			     "\t.short %c0\n"				\
-			     "\t.org 2b+%c1\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align %2\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t.short %0\n"				\
+			     "\t.blockz %1-4-2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (BUGFLAG_WARNING|(flags)),		\
 			     "i" (sizeof(struct bug_entry)) );		\
--- a/arch/parisc/include/asm/jump_label.h
+++ b/arch/parisc/include/asm/jump_label.h
@ -15,10 +15,12 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran
 	asm_volatile_goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".align %1\n\t"
 		 ".word 1b - ., %l[l_yes] - .\n\t"
 		 __stringify(ASM_ULONG_INSN) " %c0 - .\n\t"
 		 ".popsection\n\t"
-		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
+		 : : "i" (&((char *)key)[branch]), "i" (sizeof(long))
+		 : : l_yes);

 	return false;
 l_yes:
@ -30,10 +32,12 @@ static __always_inline bool arch_static_branch_jump(struct static_key *key, bool
 	asm_volatile_goto("1:\n\t"
 		 "b,n %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".align %1\n\t"
 		 ".word 1b - ., %l[l_yes] - .\n\t"
 		 __stringify(ASM_ULONG_INSN) " %c0 - .\n\t"
 		 ".popsection\n\t"
-		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
+		 : : "i" (&((char *)key)[branch]), "i" (sizeof(long))
+		 : : l_yes);

 	return false;
 l_yes:
--- a/arch/parisc/include/asm/ldcw.h
+++ b/arch/parisc/include/asm/ldcw.h
@ -55,7 +55,7 @@
 })

 #ifdef CONFIG_SMP
-# define __lock_aligned __section(".data..lock_aligned")
+# define __lock_aligned __section(".data..lock_aligned") __aligned(16)
 #endif

 #endif /* __PARISC_LDCW_H */
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@ -41,6 +41,7 @@ struct exception_table_entry {

 #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
 	".section __ex_table,\"aw\"\n"			   \
+	".align 4\n"					   \
 	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
 	".previous\n"

--- a/arch/parisc/include/uapi/asm/errno.h
+++ b/arch/parisc/include/uapi/asm/errno.h
@ -75,7 +75,6 @@

 /* We now return you to your regularly scheduled HPUX. */

-#define ENOSYM		215	/* symbol does not exist in executable */
 #define	ENOTSOCK	216	/* Socket operation on non-socket */
 #define	EDESTADDRREQ	217	/* Destination address required */
 #define	EMSGSIZE	218	/* Message too long */
@ -101,7 +100,6 @@
 #define	ETIMEDOUT	238	/* Connection timed out */
 #define	ECONNREFUSED	239	/* Connection refused */
 #define	EREFUSED	ECONNREFUSED	/* for HP's NFS apparently */
-#define	EREMOTERELEASE	240	/* Remote peer released connection */
 #define	EHOSTDOWN	241	/* Host is down */
 #define	EHOSTUNREACH	242	/* No route to host */

--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@ -130,6 +130,7 @@ SECTIONS
 	RO_DATA(8)

 	/* unwind info */
+	. = ALIGN(4);
 	.PARISC.unwind : {
 		__start___unwind = .;
 		*(.PARISC.unwind)
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@ -228,7 +228,6 @@ typedef struct thread_struct thread_struct;
 	execve_tail();							\
 } while (0)

-/* Forward declaration, a strange C thing */
 struct task_struct;
 struct mm_struct;
 struct seq_file;
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@ -666,6 +666,7 @@ static int __init ipl_init(void)
 						&ipl_ccw_attr_group_lpar);
 		break;
 	case IPL_TYPE_ECKD:
+	case IPL_TYPE_ECKD_DUMP:
 		rc = sysfs_create_group(&ipl_kset->kobj, &ipl_eckd_attr_group);
 		break;
 	case IPL_TYPE_FCP:
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@ -279,12 +279,6 @@ static int paicrypt_event_init(struct perf_event *event)
 	if (IS_ERR(cpump))
 		return PTR_ERR(cpump);

-	/* Event initialization sets last_tag to 0. When later on the events
-	 * are deleted and re-added, do not reset the event count value to zero.
-	 * Events are added, deleted and re-added when 2 or more events
-	 * are active at the same time.
-	 */
-	event->hw.last_tag = 0;
 	event->destroy = paicrypt_event_destroy;

 	if (a->sample_period) {
@ -318,6 +312,11 @@ static void paicrypt_start(struct perf_event *event, int flags)
 {
 	u64 sum;

+	/* Event initialization sets last_tag to 0. When later on the events
+	 * are deleted and re-added, do not reset the event count value to zero.
+	 * Events are added, deleted and re-added when 2 or more events
+	 * are active at the same time.
+	 */
 	if (!event->hw.last_tag) {
 		event->hw.last_tag = 1;
 		sum = paicrypt_getall(event);		/* Get current value */
--- a/arch/s390/kernel/perf_pai_ext.c
+++ b/arch/s390/kernel/perf_pai_ext.c
@ -260,7 +260,6 @@ static int paiext_event_init(struct perf_event *event)
 	rc = paiext_alloc(a, event);
 	if (rc)
 		return rc;
-	event->hw.last_tag = 0;
 	event->destroy = paiext_event_destroy;

 	if (a->sample_period) {
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@ -4660,7 +4660,7 @@ static void intel_pmu_check_hybrid_pmus(struct x86_hybrid_pmu *pmu)
 	if (pmu->intel_cap.pebs_output_pt_available)
 		pmu->pmu.capabilities |= PERF_PMU_CAP_AUX_OUTPUT;
 	else
-		pmu->pmu.capabilities |= ~PERF_PMU_CAP_AUX_OUTPUT;
+		pmu->pmu.capabilities &= ~PERF_PMU_CAP_AUX_OUTPUT;

 	intel_pmu_check_event_constraints(pmu->event_constraints,
 					  pmu->num_counters,
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <asm/apic.h>
 #include <asm/desc.h>
+#include <asm/e820/api.h>
 #include <asm/sev.h>
 #include <asm/ibt.h>
 #include <asm/hypervisor.h>
@ -286,15 +287,31 @@ static int hv_cpu_die(unsigned int cpu)

 static int __init hv_pci_init(void)
 {
-	int gen2vm = efi_enabled(EFI_BOOT);
+	bool gen2vm = efi_enabled(EFI_BOOT);

 	/*
-	 * For Generation-2 VM, we exit from pci_arch_init() by returning 0.
-	 * The purpose is to suppress the harmless warning:
+	 * A Generation-2 VM doesn't support legacy PCI/PCIe, so both
+	 * raw_pci_ops and raw_pci_ext_ops are NULL, and pci_subsys_init() ->
+	 * pcibios_init() doesn't call pcibios_resource_survey() ->
+	 * e820__reserve_resources_late(); as a result, any emulated persistent
+	 * memory of E820_TYPE_PRAM (12) via the kernel parameter
+	 * memmap=nn[KMG]!ss is not added into iomem_resource and hence can't be
+	 * detected by register_e820_pmem(). Fix this by directly calling
+	 * e820__reserve_resources_late() here: e820__reserve_resources_late()
+	 * depends on e820__reserve_resources(), which has been called earlier
+	 * from setup_arch(). Note: e820__reserve_resources_late() also adds
+	 * any memory of E820_TYPE_PMEM (7) into iomem_resource, and
+	 * acpi_nfit_register_region() -> acpi_nfit_insert_resource() ->
+	 * region_intersects() returns REGION_INTERSECTS, so the memory of
+	 * E820_TYPE_PMEM won't get added twice.
+	 *
+	 * We return 0 here so that pci_arch_init() won't print the warning:
 	 * "PCI: Fatal: No config space access function found"
 	 */
-	if (gen2vm)
+	if (gen2vm) {
+		e820__reserve_resources_late();
 		return 0;
+	}

 	/* For Generation-1 VM, we'll proceed in pci_arch_init().  */
 	return 1;
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@ -104,8 +104,6 @@ struct cont_desc {
 	size_t		     size;
 };

-static u32 ucode_new_rev;
-
 /*
 * Microcode patch container file is prepended to the initrd in cpio
 * format. See Documentation/arch/x86/microcode.rst
@ -442,12 +440,11 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
 *
 * Returns true if container found (sets @desc), false otherwise.
 */
-static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size)
+static bool early_apply_microcode(u32 cpuid_1_eax, u32 old_rev, void *ucode, size_t size)
 {
 	struct cont_desc desc = { 0 };
 	struct microcode_amd *mc;
 	bool ret = false;
-	u32 rev, dummy;

 	desc.cpuid_1_eax = cpuid_1_eax;

@ -457,22 +454,15 @@ static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size)
 	if (!mc)
 		return ret;

-	native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
 	/*
 	 * Allow application of the same revision to pick up SMT-specific
 	 * changes even if the revision of the other SMT thread is already
 	 * up-to-date.
 	 */
-	if (rev > mc->hdr.patch_id)
+	if (old_rev > mc->hdr.patch_id)
 		return ret;

-	if (!__apply_microcode_amd(mc)) {
-		ucode_new_rev = mc->hdr.patch_id;
-		ret = true;
-	}
-
-	return ret;
+	return !__apply_microcode_amd(mc);
 }

 static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
@ -506,9 +496,12 @@ static void __init find_blobs_in_containers(unsigned int cpuid_1_eax, struct cpi
 	*ret = cp;
 }

-void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
+void __init load_ucode_amd_bsp(struct early_load_data *ed, unsigned int cpuid_1_eax)
 {
 	struct cpio_data cp = { };
+	u32 dummy;
+
+	native_rdmsr(MSR_AMD64_PATCH_LEVEL, ed->old_rev, dummy);

 	/* Needed in load_microcode_amd() */
 	ucode_cpu_info[0].cpu_sig.sig = cpuid_1_eax;
@ -517,7 +510,8 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
 	if (!(cp.data && cp.size))
 		return;

-	early_apply_microcode(cpuid_1_eax, cp.data, cp.size);
+	if (early_apply_microcode(cpuid_1_eax, ed->old_rev, cp.data, cp.size))
+		native_rdmsr(MSR_AMD64_PATCH_LEVEL, ed->new_rev, dummy);
 }

 static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size);
@ -625,10 +619,8 @@ void reload_ucode_amd(unsigned int cpu)
 	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);

 	if (rev < mc->hdr.patch_id) {
-		if (!__apply_microcode_amd(mc)) {
-			ucode_new_rev = mc->hdr.patch_id;
-			pr_info("reload patch_level=0x%08x\n", ucode_new_rev);
-		}
+		if (!__apply_microcode_amd(mc))
+			pr_info_once("reload revision: 0x%08x\n", mc->hdr.patch_id);
 	}
 }

@ -649,8 +641,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 	if (p && (p->patch_id == csig->rev))
 		uci->mc = p->data;

-	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
-
 	return 0;
 }

@ -691,8 +681,6 @@ static enum ucode_state apply_microcode_amd(int cpu)
 	rev = mc_amd->hdr.patch_id;
 	ret = UCODE_UPDATED;

-	pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev);
-
 out:
 	uci->cpu_sig.rev = rev;
 	c->microcode	 = rev;
@ -935,11 +923,6 @@ struct microcode_ops * __init init_amd_microcode(void)
 		pr_warn("AMD CPU family 0x%x not supported\n", c->x86);
 		return NULL;
 	}
-
-	if (ucode_new_rev)
-		pr_info_once("microcode updated early to new patch_level=0x%08x\n",
-			     ucode_new_rev);
-
 	return &microcode_amd_ops;
 }

--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@ -41,8 +41,6 @@

 #include "internal.h"

-#define DRIVER_VERSION	"2.2"
-
 static struct microcode_ops	*microcode_ops;
 bool dis_ucode_ldr = true;

@ -77,6 +75,8 @@ static u32 final_levels[] = {
 	0, /* T-101 terminator */
 };

+struct early_load_data early_data;
+
 /*
 * Check the current patch level on this CPU.
 *
@ -155,9 +155,9 @@ void __init load_ucode_bsp(void)
 		return;

 	if (intel)
-		load_ucode_intel_bsp();
+		load_ucode_intel_bsp(&early_data);
 	else
-		load_ucode_amd_bsp(cpuid_1_eax);
+		load_ucode_amd_bsp(&early_data, cpuid_1_eax);
 }

 void load_ucode_ap(void)
@ -828,6 +828,11 @@ static int __init microcode_init(void)
 	if (!microcode_ops)
 		return -ENODEV;

+	pr_info_once("Current revision: 0x%08x\n", (early_data.new_rev ?: early_data.old_rev));
+
+	if (early_data.new_rev)
+		pr_info_once("Updated early from: 0x%08x\n", early_data.old_rev);
+
 	microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0);
 	if (IS_ERR(microcode_pdev))
 		return PTR_ERR(microcode_pdev);
@ -846,8 +851,6 @@ static int __init microcode_init(void)
 	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/microcode:online",
 			  mc_cpu_online, mc_cpu_down_prep);

-	pr_info("Microcode Update Driver: v%s.", DRIVER_VERSION);
-
 	return 0;

 out_pdev:
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@ -339,16 +339,9 @@ static enum ucode_state __apply_microcode(struct ucode_cpu_info *uci,
 static enum ucode_state apply_microcode_early(struct ucode_cpu_info *uci)
 {
 	struct microcode_intel *mc = uci->mc;
-	enum ucode_state ret;
-	u32 cur_rev, date;
+	u32 cur_rev;

-	ret = __apply_microcode(uci, mc, &cur_rev);
-	if (ret == UCODE_UPDATED) {
-		date = mc->hdr.date;
-		pr_info_once("updated early: 0x%x -> 0x%x, date = %04x-%02x-%02x\n",
-			     cur_rev, mc->hdr.rev, date & 0xffff, date >> 24, (date >> 16) & 0xff);
-	}
-	return ret;
+	return __apply_microcode(uci, mc, &cur_rev);
 }

 static __init bool load_builtin_intel_microcode(struct cpio_data *cp)
@ -413,13 +406,17 @@ static int __init save_builtin_microcode(void)
 early_initcall(save_builtin_microcode);

 /* Load microcode on BSP from initrd or builtin blobs */
-void __init load_ucode_intel_bsp(void)
+void __init load_ucode_intel_bsp(struct early_load_data *ed)
 {
 	struct ucode_cpu_info uci;

+	ed->old_rev = intel_get_microcode_revision();
+
 	uci.mc = get_microcode_blob(&uci, false);
 	if (uci.mc && apply_microcode_early(&uci) == UCODE_UPDATED)
 		ucode_patch_va = UCODE_BSP_LOADED;
+
+	ed->new_rev = uci.cpu_sig.rev;
 }

 void load_ucode_intel_ap(void)
--- a/arch/x86/kernel/cpu/microcode/internal.h
+++ b/arch/x86/kernel/cpu/microcode/internal.h
@ -37,6 +37,12 @@ struct microcode_ops {
 				use_nmi		: 1;
 };

+struct early_load_data {
+	u32 old_rev;
+	u32 new_rev;
+};
+
+extern struct early_load_data early_data;
 extern struct ucode_cpu_info ucode_cpu_info[];
 struct cpio_data find_microcode_in_initrd(const char *path);

@ -92,14 +98,14 @@ extern bool dis_ucode_ldr;
 extern bool force_minrev;

 #ifdef CONFIG_CPU_SUP_AMD
-void load_ucode_amd_bsp(unsigned int family);
+void load_ucode_amd_bsp(struct early_load_data *ed, unsigned int family);
 void load_ucode_amd_ap(unsigned int family);
 int save_microcode_in_initrd_amd(unsigned int family);
 void reload_ucode_amd(unsigned int cpu);
 struct microcode_ops *init_amd_microcode(void);
 void exit_amd_microcode(void);
 #else /* CONFIG_CPU_SUP_AMD */
-static inline void load_ucode_amd_bsp(unsigned int family) { }
+static inline void load_ucode_amd_bsp(struct early_load_data *ed, unsigned int family) { }
 static inline void load_ucode_amd_ap(unsigned int family) { }
 static inline int save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
 static inline void reload_ucode_amd(unsigned int cpu) { }
@ -108,12 +114,12 @@ static inline void exit_amd_microcode(void) { }
 #endif /* !CONFIG_CPU_SUP_AMD */

 #ifdef CONFIG_CPU_SUP_INTEL
-void load_ucode_intel_bsp(void);
+void load_ucode_intel_bsp(struct early_load_data *ed);
 void load_ucode_intel_ap(void);
 void reload_ucode_intel(void);
 struct microcode_ops *init_intel_microcode(void);
 #else /* CONFIG_CPU_SUP_INTEL */
-static inline void load_ucode_intel_bsp(void) { }
+static inline void load_ucode_intel_bsp(struct early_load_data *ed) { }
 static inline void load_ucode_intel_ap(void) { }
 static inline void reload_ucode_intel(void) { }
 static inline struct microcode_ops *init_intel_microcode(void) { return NULL; }
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@ -262,11 +262,14 @@ static uint32_t  __init ms_hyperv_platform(void)
 static int hv_nmi_unknown(unsigned int val, struct pt_regs *regs)
 {
 	static atomic_t nmi_cpu = ATOMIC_INIT(-1);
+	unsigned int old_cpu, this_cpu;

 	if (!unknown_nmi_panic)
 		return NMI_DONE;

-	if (atomic_cmpxchg(&nmi_cpu, -1, raw_smp_processor_id()) != -1)
+	old_cpu = -1;
+	this_cpu = raw_smp_processor_id();
+	if (!atomic_try_cmpxchg(&nmi_cpu, &old_cpu, this_cpu))
 		return NMI_HANDLED;

 	return NMI_DONE;
--- a/block/bdev.c
+++ b/block/bdev.c
@ -425,6 +425,8 @@ void bdev_set_nr_sectors(struct block_device *bdev, sector_t sectors)

 void bdev_add(struct block_device *bdev, dev_t dev)
 {
+	if (bdev_stable_writes(bdev))
+		mapping_set_stable_writes(bdev->bd_inode->i_mapping);
 	bdev->bd_dev = dev;
 	bdev->bd_inode->i_rdev = dev;
 	bdev->bd_inode->i_ino = dev;
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@ -577,6 +577,7 @@ static void blkg_destroy_all(struct gendisk *disk)
 	struct request_queue *q = disk->queue;
 	struct blkcg_gq *blkg, *n;
 	int count = BLKG_DESTROY_BATCH_SIZE;
+	int i;

 restart:
 	spin_lock_irq(&q->queue_lock);
@ -602,6 +603,18 @@ static void blkg_destroy_all(struct gendisk *disk)
 		}
 	}

+	/*
+	 * Mark policy deactivated since policy offline has been done, and
+	 * the free is scheduled, so future blkcg_deactivate_policy() can
+	 * be bypassed
+	 */
+	for (i = 0; i < BLKCG_MAX_POLS; i++) {
+		struct blkcg_policy *pol = blkcg_policy[i];
+
+		if (pol)
+			__clear_bit(pol->plid, q->blkcg_pols);
+	}
+
 	q->root_blkg = NULL;
 	spin_unlock_irq(&q->queue_lock);
 }
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@ -249,8 +249,6 @@ static inline struct blkcg_gq *blkg_lookup(struct blkcg *blkcg,
 {
 	struct blkcg_gq *blkg;

-	WARN_ON_ONCE(!rcu_read_lock_held());
-
 	if (blkcg == &blkcg_root)
 		return q->root_blkg;

--- a/block/blk-pm.c
+++ b/block/blk-pm.c
@ -163,38 +163,15 @@ EXPORT_SYMBOL(blk_pre_runtime_resume);
 * @q: the queue of the device
 *
 * Description:
- *    For historical reasons, this routine merely calls blk_set_runtime_active()
- *    to do the real work of restarting the queue.  It does this regardless of
- *    whether the device's runtime-resume succeeded; even if it failed the
+ *    Restart the queue of a runtime suspended device. It does this regardless
+ *    of whether the device's runtime-resume succeeded; even if it failed the
 *    driver or error handler will need to communicate with the device.
 *
 *    This function should be called near the end of the device's
- *    runtime_resume callback.
+ *    runtime_resume callback to correct queue runtime PM status and re-enable
+ *    peeking requests from the queue.
 */
 void blk_post_runtime_resume(struct request_queue *q)
-{
-	blk_set_runtime_active(q);
-}
-EXPORT_SYMBOL(blk_post_runtime_resume);
-
-/**
- * blk_set_runtime_active - Force runtime status of the queue to be active
- * @q: the queue of the device
- *
- * If the device is left runtime suspended during system suspend the resume
- * hook typically resumes the device and corrects runtime status
- * accordingly. However, that does not affect the queue runtime PM status
- * which is still "suspended". This prevents processing requests from the
- * queue.
- *
- * This function can be used in driver's resume hook to correct queue
- * runtime PM status and re-enable peeking requests from the queue. It
- * should be called before first request is added to the queue.
- *
- * This function is also called by blk_post_runtime_resume() for
- * runtime resumes.  It does everything necessary to restart the queue.
- */
-void blk_set_runtime_active(struct request_queue *q)
 {
 	int old_status;

@ -211,4 +188,4 @@ void blk_set_runtime_active(struct request_queue *q)
 	if (old_status != RPM_ACTIVE)
 		blk_clear_pm_only(q);
 }
-EXPORT_SYMBOL(blk_set_runtime_active);
+EXPORT_SYMBOL(blk_post_runtime_resume);
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@ -1320,6 +1320,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		   tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE),
 		   tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));

+	rcu_read_lock();
 	/*
 	 * Update has_rules[] flags for the updated tg's subtree.  A tg is
 	 * considered to have rules if either the tg itself or any of its
@ -1347,6 +1348,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		this_tg->latency_target = max(this_tg->latency_target,
 				parent_tg->latency_target);
 	}
+	rcu_read_unlock();

 	/*
 	 * We're already holding queue_lock and know @tg is valid.  Let's
--- a/drivers/accel/ivpu/ivpu_hw_37xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_37xx.c
@ -502,6 +502,16 @@ static int ivpu_boot_pwr_domain_enable(struct ivpu_device *vdev)
 	return ret;
 }

+static int ivpu_boot_pwr_domain_disable(struct ivpu_device *vdev)
+{
+	ivpu_boot_dpu_active_drive(vdev, false);
+	ivpu_boot_pwr_island_isolation_drive(vdev, true);
+	ivpu_boot_pwr_island_trickle_drive(vdev, false);
+	ivpu_boot_pwr_island_drive(vdev, false);
+
+	return ivpu_boot_wait_for_pwr_island_status(vdev, 0x0);
+}
+
 static void ivpu_boot_no_snoop_enable(struct ivpu_device *vdev)
 {
 	u32 val = REGV_RD32(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES);
@ -600,25 +610,17 @@ static int ivpu_hw_37xx_info_init(struct ivpu_device *vdev)

 static int ivpu_hw_37xx_reset(struct ivpu_device *vdev)
 {
-	int ret;
-	u32 val;
+	int ret = 0;

-	if (IVPU_WA(punit_disabled))
-		return 0;
-
-	ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US);
-	if (ret) {
-		ivpu_err(vdev, "Timed out waiting for TRIGGER bit\n");
-		return ret;
+	if (ivpu_boot_pwr_domain_disable(vdev)) {
+		ivpu_err(vdev, "Failed to disable power domain\n");
+		ret = -EIO;
 	}

-	val = REGB_RD32(VPU_37XX_BUTTRESS_VPU_IP_RESET);
-	val = REG_SET_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, val);
-	REGB_WR32(VPU_37XX_BUTTRESS_VPU_IP_RESET, val);
-
-	ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US);
-	if (ret)
-		ivpu_err(vdev, "Timed out waiting for RESET completion\n");
+	if (ivpu_pll_disable(vdev)) {
+		ivpu_err(vdev, "Failed to disable PLL\n");
+		ret = -EIO;
+	}

 	return ret;
 }
@ -651,10 +653,6 @@ static int ivpu_hw_37xx_power_up(struct ivpu_device *vdev)
 {
 	int ret;

-	ret = ivpu_hw_37xx_reset(vdev);
-	if (ret)
-		ivpu_warn(vdev, "Failed to reset HW: %d\n", ret);
-
 	ret = ivpu_hw_37xx_d0i3_disable(vdev);
 	if (ret)
 		ivpu_warn(vdev, "Failed to disable D0I3: %d\n", ret);
@ -722,11 +720,11 @@ static int ivpu_hw_37xx_power_down(struct ivpu_device *vdev)
 {
 	int ret = 0;

-	if (!ivpu_hw_37xx_is_idle(vdev) && ivpu_hw_37xx_reset(vdev))
-		ivpu_err(vdev, "Failed to reset the VPU\n");
+	if (!ivpu_hw_37xx_is_idle(vdev))
+		ivpu_warn(vdev, "VPU not idle during power down\n");

-	if (ivpu_pll_disable(vdev)) {
-		ivpu_err(vdev, "Failed to disable PLL\n");
+	if (ivpu_hw_37xx_reset(vdev)) {
+		ivpu_err(vdev, "Failed to reset VPU\n");
 		ret = -EIO;
 	}

--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@ -2031,7 +2031,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	 * HP ZBook Fury 16 G10 requires ACPI video's child devices have _PS0
 	 * evaluated to have functional panel brightness control.
 	 */
-	acpi_device_fix_up_power_extended(device);
+	acpi_device_fix_up_power_children(device);

 	pr_info("%s [%s] (multi-head: %s  rom: %s  post: %s)\n",
 	       ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@ -397,6 +397,19 @@ void acpi_device_fix_up_power_extended(struct acpi_device *adev)
 }
 EXPORT_SYMBOL_GPL(acpi_device_fix_up_power_extended);

+/**
+ * acpi_device_fix_up_power_children - Force a device's children into D0.
+ * @adev: Parent device object whose children's power state is to be fixed up.
+ *
+ * Call acpi_device_fix_up_power() for @adev's children so long as they
+ * are reported as present and enabled.
+ */
+void acpi_device_fix_up_power_children(struct acpi_device *adev)
+{
+	acpi_dev_for_each_child(adev, fix_up_power_if_applicable, NULL);
+}
+EXPORT_SYMBOL_GPL(acpi_device_fix_up_power_children);
+
 int acpi_device_update_power(struct acpi_device *device, int *state_p)
 {
 	int state;
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@ -592,7 +592,7 @@ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
 	while (1) {

 		if (cx->entry_method == ACPI_CSTATE_HALT)
-			safe_halt();
+			raw_safe_halt();
 		else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
 			io_idle(cx->address);
 		} else
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@ -447,6 +447,13 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "B1402CBA"),
 		},
 	},
+	{
+		/* Asus ExpertBook B1402CVA */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "B1402CVA"),
+		},
+	},
 	{
 		/* Asus ExpertBook B1502CBA */
 		.matches = {
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@ -82,6 +82,9 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 	if (pnp_port_valid(idev, 1)) {
 		ctl_addr = devm_ioport_map(&idev->dev,
 					   pnp_port_start(idev, 1), 1);
+		if (!ctl_addr)
+			return -ENOMEM;
+
 		ap->ioaddr.altstatus_addr = ctl_addr;
 		ap->ioaddr.ctl_addr = ctl_addr;
 		ap->ops = &isapnp_port_ops;
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@ -67,6 +67,7 @@ struct nbd_sock {
 struct recv_thread_args {
 	struct work_struct work;
 	struct nbd_device *nbd;
+	struct nbd_sock *nsock;
 	int index;
 };

@ -395,6 +396,22 @@ static u32 req_to_nbd_cmd_type(struct request *req)
 	}
 }

+static struct nbd_config *nbd_get_config_unlocked(struct nbd_device *nbd)
+{
+	if (refcount_inc_not_zero(&nbd->config_refs)) {
+		/*
+		 * Add smp_mb__after_atomic to ensure that reading nbd->config_refs
+		 * and reading nbd->config is ordered. The pair is the barrier in
+		 * nbd_alloc_and_init_config(), avoid nbd->config_refs is set
+		 * before nbd->config.
+		 */
+		smp_mb__after_atomic();
+		return nbd->config;
+	}
+
+	return NULL;
+}
+
 static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req)
 {
 	struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req);
@ -409,13 +426,13 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req)
 		return BLK_EH_DONE;
 	}

-	if (!refcount_inc_not_zero(&nbd->config_refs)) {
+	config = nbd_get_config_unlocked(nbd);
+	if (!config) {
 		cmd->status = BLK_STS_TIMEOUT;
 		__clear_bit(NBD_CMD_INFLIGHT, &cmd->flags);
 		mutex_unlock(&cmd->lock);
 		goto done;
 	}
-	config = nbd->config;

 	if (config->num_connections > 1 ||
 	    (config->num_connections == 1 && nbd->tag_set.timeout)) {
@ -489,15 +506,9 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req)
 	return BLK_EH_DONE;
 }

-/*
- *  Send or receive packet. Return a positive value on success and
- *  negtive value on failue, and never return 0.
- */
-static int sock_xmit(struct nbd_device *nbd, int index, int send,
-		     struct iov_iter *iter, int msg_flags, int *sent)
+static int __sock_xmit(struct nbd_device *nbd, struct socket *sock, int send,
+		       struct iov_iter *iter, int msg_flags, int *sent)
 {
-	struct nbd_config *config = nbd->config;
-	struct socket *sock = config->socks[index]->sock;
 	int result;
 	struct msghdr msg;
 	unsigned int noreclaim_flag;
@ -540,6 +551,19 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
 	return result;
 }

+/*
+ *  Send or receive packet. Return a positive value on success and
+ *  negtive value on failure, and never return 0.
+ */
+static int sock_xmit(struct nbd_device *nbd, int index, int send,
+		     struct iov_iter *iter, int msg_flags, int *sent)
+{
+	struct nbd_config *config = nbd->config;
+	struct socket *sock = config->socks[index]->sock;
+
+	return __sock_xmit(nbd, sock, send, iter, msg_flags, sent);
+}
+
 /*
 * Different settings for sk->sk_sndtimeo can result in different return values
 * if there is a signal pending when we enter sendmsg, because reasons?
@ -696,7 +720,7 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 	return 0;
 }

-static int nbd_read_reply(struct nbd_device *nbd, int index,
+static int nbd_read_reply(struct nbd_device *nbd, struct socket *sock,
 			  struct nbd_reply *reply)
 {
 	struct kvec iov = {.iov_base = reply, .iov_len = sizeof(*reply)};
@ -705,7 +729,7 @@ static int nbd_read_reply(struct nbd_device *nbd, int index,

 	reply->magic = 0;
 	iov_iter_kvec(&to, ITER_DEST, &iov, 1, sizeof(*reply));
-	result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL, NULL);
+	result = __sock_xmit(nbd, sock, 0, &to, MSG_WAITALL, NULL);
 	if (result < 0) {
 		if (!nbd_disconnected(nbd->config))
 			dev_err(disk_to_dev(nbd->disk),
@ -829,14 +853,14 @@ static void recv_work(struct work_struct *work)
 	struct nbd_device *nbd = args->nbd;
 	struct nbd_config *config = nbd->config;
 	struct request_queue *q = nbd->disk->queue;
-	struct nbd_sock *nsock;
+	struct nbd_sock *nsock = args->nsock;
 	struct nbd_cmd *cmd;
 	struct request *rq;

 	while (1) {
 		struct nbd_reply reply;

-		if (nbd_read_reply(nbd, args->index, &reply))
+		if (nbd_read_reply(nbd, nsock->sock, &reply))
 			break;

 		/*
@ -871,7 +895,6 @@ static void recv_work(struct work_struct *work)
 		percpu_ref_put(&q->q_usage_counter);
 	}

-	nsock = config->socks[args->index];
 	mutex_lock(&nsock->tx_lock);
 	nbd_mark_nsock_dead(nbd, nsock, 1);
 	mutex_unlock(&nsock->tx_lock);
@ -977,12 +1000,12 @@ static int nbd_handle_cmd(struct nbd_cmd *cmd, int index)
 	struct nbd_sock *nsock;
 	int ret;

-	if (!refcount_inc_not_zero(&nbd->config_refs)) {
+	config = nbd_get_config_unlocked(nbd);
+	if (!config) {
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 				    "Socks array is empty\n");
 		return -EINVAL;
 	}
-	config = nbd->config;

 	if (index >= config->num_connections) {
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
@ -1215,6 +1238,7 @@ static int nbd_reconnect_socket(struct nbd_device *nbd, unsigned long arg)
 		INIT_WORK(&args->work, recv_work);
 		args->index = i;
 		args->nbd = nbd;
+		args->nsock = nsock;
 		nsock->cookie++;
 		mutex_unlock(&nsock->tx_lock);
 		sockfd_put(old);
@ -1397,6 +1421,7 @@ static int nbd_start_device(struct nbd_device *nbd)
 		refcount_inc(&nbd->config_refs);
 		INIT_WORK(&args->work, recv_work);
 		args->nbd = nbd;
+		args->nsock = config->socks[i];
 		args->index = i;
 		queue_work(nbd->recv_workq, &args->work);
 	}
@ -1530,17 +1555,20 @@ static int nbd_ioctl(struct block_device *bdev, blk_mode_t mode,
 	return error;
 }

-static struct nbd_config *nbd_alloc_config(void)
+static int nbd_alloc_and_init_config(struct nbd_device *nbd)
 {
 	struct nbd_config *config;

+	if (WARN_ON(nbd->config))
+		return -EINVAL;
+
 	if (!try_module_get(THIS_MODULE))
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;

 	config = kzalloc(sizeof(struct nbd_config), GFP_NOFS);
 	if (!config) {
 		module_put(THIS_MODULE);
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}

 	atomic_set(&config->recv_threads, 0);
@ -1548,12 +1576,24 @@ static struct nbd_config *nbd_alloc_config(void)
 	init_waitqueue_head(&config->conn_wait);
 	config->blksize_bits = NBD_DEF_BLKSIZE_BITS;
 	atomic_set(&config->live_connections, 0);
-	return config;
+
+	nbd->config = config;
+	/*
+	 * Order refcount_set(&nbd->config_refs, 1) and nbd->config assignment,
+	 * its pair is the barrier in nbd_get_config_unlocked().
+	 * So nbd_get_config_unlocked() won't see nbd->config as null after
+	 * refcount_inc_not_zero() succeed.
+	 */
+	smp_mb__before_atomic();
+	refcount_set(&nbd->config_refs, 1);
+
+	return 0;
 }

 static int nbd_open(struct gendisk *disk, blk_mode_t mode)
 {
 	struct nbd_device *nbd;
+	struct nbd_config *config;
 	int ret = 0;

 	mutex_lock(&nbd_index_mutex);
@ -1566,27 +1606,25 @@ static int nbd_open(struct gendisk *disk, blk_mode_t mode)
 		ret = -ENXIO;
 		goto out;
 	}
-	if (!refcount_inc_not_zero(&nbd->config_refs)) {
-		struct nbd_config *config;

+	config = nbd_get_config_unlocked(nbd);
+	if (!config) {
 		mutex_lock(&nbd->config_lock);
 		if (refcount_inc_not_zero(&nbd->config_refs)) {
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
-		config = nbd_alloc_config();
-		if (IS_ERR(config)) {
-			ret = PTR_ERR(config);
+		ret = nbd_alloc_and_init_config(nbd);
+		if (ret) {
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
-		nbd->config = config;
-		refcount_set(&nbd->config_refs, 1);
+
 		refcount_inc(&nbd->refs);
 		mutex_unlock(&nbd->config_lock);
 		if (max_part)
 			set_bit(GD_NEED_PART_SCAN, &disk->state);
-	} else if (nbd_disconnected(nbd->config)) {
+	} else if (nbd_disconnected(config)) {
 		if (max_part)
 			set_bit(GD_NEED_PART_SCAN, &disk->state);
 	}
@ -1990,22 +2028,17 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
 		pr_err("nbd%d already in use\n", index);
 		return -EBUSY;
 	}
-	if (WARN_ON(nbd->config)) {
-		mutex_unlock(&nbd->config_lock);
-		nbd_put(nbd);
-		return -EINVAL;
-	}
-	config = nbd_alloc_config();
-	if (IS_ERR(config)) {
+
+	ret = nbd_alloc_and_init_config(nbd);
+	if (ret) {
 		mutex_unlock(&nbd->config_lock);
 		nbd_put(nbd);
 		pr_err("couldn't allocate config\n");
-		return PTR_ERR(config);
+		return ret;
 	}
-	nbd->config = config;
-	refcount_set(&nbd->config_refs, 1);
-	set_bit(NBD_RT_BOUND, &config->runtime_flags);

+	config = nbd->config;
+	set_bit(NBD_RT_BOUND, &config->runtime_flags);
 	ret = nbd_genl_size_set(info, nbd);
 	if (ret)
 		goto out;
@ -2208,7 +2241,8 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
 	}
 	mutex_unlock(&nbd_index_mutex);

-	if (!refcount_inc_not_zero(&nbd->config_refs)) {
+	config = nbd_get_config_unlocked(nbd);
+	if (!config) {
 		dev_err(nbd_to_dev(nbd),
 			"not configured, cannot reconfigure\n");
 		nbd_put(nbd);
@ -2216,7 +2250,6 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
 	}

 	mutex_lock(&nbd->config_lock);
-	config = nbd->config;
 	if (!test_bit(NBD_RT_BOUND, &config->runtime_flags) ||
 	    !nbd->pid) {
 		dev_err(nbd_to_dev(nbd),
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@ -1464,19 +1464,13 @@ blk_status_t null_process_cmd(struct nullb_cmd *cmd, enum req_op op,
 	return BLK_STS_OK;
 }

-static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,
-				    sector_t nr_sectors, enum req_op op)
+static void null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,
+			    sector_t nr_sectors, enum req_op op)
 {
 	struct nullb_device *dev = cmd->nq->dev;
 	struct nullb *nullb = dev->nullb;
 	blk_status_t sts;

-	if (test_bit(NULLB_DEV_FL_THROTTLED, &dev->flags)) {
-		sts = null_handle_throttled(cmd);
-		if (sts != BLK_STS_OK)
-			return sts;
-	}
-
 	if (op == REQ_OP_FLUSH) {
 		cmd->error = errno_to_blk_status(null_handle_flush(nullb));
 		goto out;
@ -1493,7 +1487,6 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,

 out:
 	nullb_complete_cmd(cmd);
-	return BLK_STS_OK;
 }

 static enum hrtimer_restart nullb_bwtimer_fn(struct hrtimer *timer)
@ -1724,8 +1717,6 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 	cmd->fake_timeout = should_timeout_request(rq) ||
 		blk_should_fake_timeout(rq->q);

-	blk_mq_start_request(rq);
-
 	if (should_requeue_request(rq)) {
 		/*
 		 * Alternate between hitting the core BUSY path, and the
@ -1738,6 +1729,15 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 		return BLK_STS_OK;
 	}

+	if (test_bit(NULLB_DEV_FL_THROTTLED, &nq->dev->flags)) {
+		blk_status_t sts = null_handle_throttled(cmd);
+
+		if (sts != BLK_STS_OK)
+			return sts;
+	}
+
+	blk_mq_start_request(rq);
+
 	if (is_poll) {
 		spin_lock(&nq->poll_lock);
 		list_add_tail(&rq->queuelist, &nq->poll_list);
@ -1747,7 +1747,8 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 	if (cmd->fake_timeout)
 		return BLK_STS_OK;

-	return null_handle_cmd(cmd, sector, nr_sectors, req_op(rq));
+	null_handle_cmd(cmd, sector, nr_sectors, req_op(rq));
+	return BLK_STS_OK;
 }

 static void null_queue_rqs(struct request **rqlist)
--- a/drivers/dpll/dpll_netlink.c
+++ b/drivers/dpll/dpll_netlink.c
@ -1093,9 +1093,10 @@ int dpll_nl_pin_id_get_doit(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;
 	hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0,
 				DPLL_CMD_PIN_ID_GET);
-	if (!hdr)
+	if (!hdr) {
+		nlmsg_free(msg);
 		return -EMSGSIZE;
-
+	}
 	pin = dpll_pin_find_from_nlattr(info);
 	if (!IS_ERR(pin)) {
 		ret = dpll_msg_add_pin_handle(msg, pin);
@ -1123,8 +1124,10 @@ int dpll_nl_pin_get_doit(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;
 	hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0,
 				DPLL_CMD_PIN_GET);
-	if (!hdr)
+	if (!hdr) {
+		nlmsg_free(msg);
 		return -EMSGSIZE;
+	}
 	ret = dpll_cmd_pin_get_one(msg, pin, info->extack);
 	if (ret) {
 		nlmsg_free(msg);
@ -1256,8 +1259,10 @@ int dpll_nl_device_id_get_doit(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;
 	hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0,
 				DPLL_CMD_DEVICE_ID_GET);
-	if (!hdr)
+	if (!hdr) {
+		nlmsg_free(msg);
 		return -EMSGSIZE;
+	}

 	dpll = dpll_device_find_from_nlattr(info);
 	if (!IS_ERR(dpll)) {
@ -1284,8 +1289,10 @@ int dpll_nl_device_get_doit(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;
 	hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0,
 				DPLL_CMD_DEVICE_GET);
-	if (!hdr)
+	if (!hdr) {
+		nlmsg_free(msg);
 		return -EMSGSIZE;
+	}

 	ret = dpll_device_get_one(dpll, msg, info->extack);
 	if (ret) {
--- a/drivers/gpu/drm/ast/ast_drv.h
+++ b/drivers/gpu/drm/ast/ast_drv.h
@ -174,6 +174,17 @@ to_ast_sil164_connector(struct drm_connector *connector)
 	return container_of(connector, struct ast_sil164_connector, base);
 }

+struct ast_bmc_connector {
+	struct drm_connector base;
+	struct drm_connector *physical_connector;
+};
+
+static inline struct ast_bmc_connector *
+to_ast_bmc_connector(struct drm_connector *connector)
+{
+	return container_of(connector, struct ast_bmc_connector, base);
+}
+
 /*
 * Device
 */
@ -218,7 +229,7 @@ struct ast_device {
 		} astdp;
 		struct {
 			struct drm_encoder encoder;
-			struct drm_connector connector;
+			struct ast_bmc_connector bmc_connector;
 		} bmc;
 	} output;

--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@ -1767,6 +1767,30 @@ static const struct drm_encoder_funcs ast_bmc_encoder_funcs = {
 	.destroy = drm_encoder_cleanup,
 };

+static int ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
+					       struct drm_modeset_acquire_ctx *ctx,
+					       bool force)
+{
+	struct ast_bmc_connector *bmc_connector = to_ast_bmc_connector(connector);
+	struct drm_connector *physical_connector = bmc_connector->physical_connector;
+
+	/*
+	 * Most user-space compositors cannot handle more than one connected
+	 * connector per CRTC. Hence, we only mark the BMC as connected if the
+	 * physical connector is disconnected. If the physical connector's status
+	 * is connected or unknown, the BMC remains disconnected. This has no
+	 * effect on the output of the BMC.
+	 *
+	 * FIXME: Remove this logic once user-space compositors can handle more
+	 *        than one connector per CRTC. The BMC should always be connected.
+	 */
+
+	if (physical_connector && physical_connector->status == connector_status_disconnected)
+		return connector_status_connected;
+
+	return connector_status_disconnected;
+}
+
 static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector)
 {
 	return drm_add_modes_noedid(connector, 4096, 4096);
@ -1774,6 +1798,7 @@ static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector)

 static const struct drm_connector_helper_funcs ast_bmc_connector_helper_funcs = {
 	.get_modes = ast_bmc_connector_helper_get_modes,
+	.detect_ctx = ast_bmc_connector_helper_detect_ctx,
 };

 static const struct drm_connector_funcs ast_bmc_connector_funcs = {
@ -1784,12 +1809,33 @@ static const struct drm_connector_funcs ast_bmc_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };

-static int ast_bmc_output_init(struct ast_device *ast)
+static int ast_bmc_connector_init(struct drm_device *dev,
+				  struct ast_bmc_connector *bmc_connector,
+				  struct drm_connector *physical_connector)
+{
+	struct drm_connector *connector = &bmc_connector->base;
+	int ret;
+
+	ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs,
+				 DRM_MODE_CONNECTOR_VIRTUAL);
+	if (ret)
+		return ret;
+
+	drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs);
+
+	bmc_connector->physical_connector = physical_connector;
+
+	return 0;
+}
+
+static int ast_bmc_output_init(struct ast_device *ast,
+			       struct drm_connector *physical_connector)
 {
 	struct drm_device *dev = &ast->base;
 	struct drm_crtc *crtc = &ast->crtc;
 	struct drm_encoder *encoder = &ast->output.bmc.encoder;
-	struct drm_connector *connector = &ast->output.bmc.connector;
+	struct ast_bmc_connector *bmc_connector = &ast->output.bmc.bmc_connector;
+	struct drm_connector *connector = &bmc_connector->base;
 	int ret;

 	ret = drm_encoder_init(dev, encoder,
@ -1799,13 +1845,10 @@ static int ast_bmc_output_init(struct ast_device *ast)
 		return ret;
 	encoder->possible_crtcs = drm_crtc_mask(crtc);

-	ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs,
-				 DRM_MODE_CONNECTOR_VIRTUAL);
+	ret = ast_bmc_connector_init(dev, bmc_connector, physical_connector);
 	if (ret)
 		return ret;

-	drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs);
-
 	ret = drm_connector_attach_encoder(connector, encoder);
 	if (ret)
 		return ret;
@ -1864,6 +1907,7 @@ static const struct drm_mode_config_funcs ast_mode_config_funcs = {
 int ast_mode_config_init(struct ast_device *ast)
 {
 	struct drm_device *dev = &ast->base;
+	struct drm_connector *physical_connector = NULL;
 	int ret;

 	ret = drmm_mode_config_init(dev);
@ -1904,23 +1948,27 @@ int ast_mode_config_init(struct ast_device *ast)
 		ret = ast_vga_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.vga.vga_connector.base;
 	}
 	if (ast->tx_chip_types & AST_TX_SIL164_BIT) {
 		ret = ast_sil164_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.sil164.sil164_connector.base;
 	}
 	if (ast->tx_chip_types & AST_TX_DP501_BIT) {
 		ret = ast_dp501_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.dp501.connector;
 	}
 	if (ast->tx_chip_types & AST_TX_ASTDP_BIT) {
 		ret = ast_astdp_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.astdp.connector;
 	}
-	ret = ast_bmc_output_init(ast);
+	ret = ast_bmc_output_init(ast, physical_connector);
 	if (ret)
 		return ret;

--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@ -1161,6 +1161,14 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	intel_connector->port = port;
 	drm_dp_mst_get_port_malloc(port);

+	/*
+	 * TODO: set the AUX for the actual MST port decompressing the stream.
+	 * At the moment the driver only supports enabling this globally in the
+	 * first downstream MST branch, via intel_dp's (root port) AUX.
+	 */
+	intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
+	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
+
 	connector = &intel_connector->base;
 	ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
 				 DRM_MODE_CONNECTOR_DisplayPort);
@ -1172,14 +1180,6 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo

 	drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs);

-	/*
-	 * TODO: set the AUX for the actual MST port decompressing the stream.
-	 * At the moment the driver only supports enabling this globally in the
-	 * first downstream MST branch, via intel_dp's (root port) AUX.
-	 */
-	intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
-	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
-
 	for_each_pipe(dev_priv, pipe) {
 		struct drm_encoder *enc =
 			&intel_dp->mst_encoders[pipe]->base.base;
--- a/drivers/gpu/drm/i915/gt/intel_gt.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt.c
@ -982,8 +982,6 @@ int intel_gt_probe_all(struct drm_i915_private *i915)

 err:
 	i915_probe_error(i915, "Failed to initialize %s! (%d)\n", gtdef->name, ret);
-	intel_gt_release_all(i915);
-
 	return ret;
 }

@ -1002,15 +1000,6 @@ int intel_gt_tiles_init(struct drm_i915_private *i915)
 	return 0;
 }

-void intel_gt_release_all(struct drm_i915_private *i915)
-{
-	struct intel_gt *gt;
-	unsigned int id;
-
-	for_each_gt(gt, i915, id)
-		i915->gt[id] = NULL;
-}
-
 void intel_gt_info_print(const struct intel_gt_info *info,
 			 struct drm_printer *p)
 {
--- a/drivers/gpu/drm/i915/i915_driver.c
+++ b/drivers/gpu/drm/i915/i915_driver.c
@ -782,7 +782,7 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

 	ret = i915_driver_mmio_probe(i915);
 	if (ret < 0)
-		goto out_tiles_cleanup;
+		goto out_runtime_pm_put;

 	ret = i915_driver_hw_probe(i915);
 	if (ret < 0)
@ -842,8 +842,6 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	i915_ggtt_driver_late_release(i915);
 out_cleanup_mmio:
 	i915_driver_mmio_release(i915);
-out_tiles_cleanup:
-	intel_gt_release_all(i915);
 out_runtime_pm_put:
 	enable_rpm_wakeref_asserts(&i915->runtime_pm);
 	i915_driver_late_release(i915);
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
@ -406,6 +406,7 @@ static const struct dpu_perf_cfg sc8280xp_perf_data = {
 	.min_llcc_ib = 0,
 	.min_dram_ib = 800000,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
 		.entries = sc8180x_qos_linear
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@ -844,8 +844,7 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)

 	return 0;
 fail:
-	if (mdp5_kms)
-		mdp5_destroy(mdp5_kms);
+	mdp5_destroy(mdp5_kms);
 	return ret;
 }

--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@ -365,9 +365,11 @@ static int dp_display_send_hpd_notification(struct dp_display_private *dp,
 	/* reset video pattern flag on disconnect */
 	if (!hpd) {
 		dp->panel->video_test = false;
-		drm_dp_set_subconnector_property(dp->dp_display.connector,
-						 connector_status_disconnected,
-						 dp->panel->dpcd, dp->panel->downstream_ports);
+		if (!dp->dp_display.is_edp)
+			drm_dp_set_subconnector_property(dp->dp_display.connector,
+							 connector_status_disconnected,
+							 dp->panel->dpcd,
+							 dp->panel->downstream_ports);
 	}

 	dp->dp_display.is_connected = hpd;
@ -396,8 +398,11 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)

 	dp_link_process_request(dp->link);

-	drm_dp_set_subconnector_property(dp->dp_display.connector, connector_status_connected,
-					 dp->panel->dpcd, dp->panel->downstream_ports);
+	if (!dp->dp_display.is_edp)
+		drm_dp_set_subconnector_property(dp->dp_display.connector,
+						 connector_status_connected,
+						 dp->panel->dpcd,
+						 dp->panel->downstream_ports);

 	edid = dp->panel->edid;

--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@ -345,6 +345,9 @@ struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display, struct dr
 	if (IS_ERR(connector))
 		return connector;

+	if (!dp_display->is_edp)
+		drm_connector_attach_dp_subconnector_property(connector);
+
 	drm_connector_attach_encoder(connector, encoder);

 	return connector;
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@ -918,7 +918,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
 		if (phy->cphy_mode) {
 			vreg_ctrl_0 = 0x45;
-			vreg_ctrl_1 = 0x45;
+			vreg_ctrl_1 = 0x41;
 			glbl_rescode_top_ctrl = 0x00;
 			glbl_rescode_bot_ctrl = 0x00;
 		} else {
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@ -288,8 +288,6 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
 	if (ret)
 		goto err_msm_uninit;

-	drm_kms_helper_poll_init(ddev);
-
 	if (priv->kms_init) {
 		drm_kms_helper_poll_init(ddev);
 		msm_fbdev_setup(ddev);
--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c
@ -539,7 +539,7 @@ r535_fifo_runl_ctor(struct nvkm_fifo *fifo)
 	struct nvkm_runl *runl;
 	struct nvkm_engn *engn;
 	u32 cgids = 2048;
-	u32 chids = 2048 / CHID_PER_USERD;
+	u32 chids = 2048;
 	int ret;
 	NV2080_CTRL_FIFO_GET_DEVICE_INFO_TABLE_PARAMS *ctrl;

--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@ -1709,6 +1709,7 @@ static const struct panel_desc auo_b101uan08_3_desc = {
 	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 		      MIPI_DSI_MODE_LPM,
 	.init_cmds = auo_b101uan08_3_init_cmd,
+	.lp11_before_reset = true,
 };

 static const struct drm_display_mode boe_tv105wum_nw0_default_mode = {
@ -1766,11 +1767,11 @@ static const struct panel_desc starry_qfh032011_53g_desc = {
 };

 static const struct drm_display_mode starry_himax83102_j02_default_mode = {
-	.clock = 161600,
+	.clock = 162850,
 	.hdisplay = 1200,
-	.hsync_start = 1200 + 40,
-	.hsync_end = 1200 + 40 + 20,
-	.htotal = 1200 + 40 + 20 + 40,
+	.hsync_start = 1200 + 50,
+	.hsync_end = 1200 + 50 + 20,
+	.htotal = 1200 + 50 + 20 + 50,
 	.vdisplay = 1920,
 	.vsync_start = 1920 + 116,
 	.vsync_end = 1920 + 116 + 8,
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@ -2379,13 +2379,13 @@ static const struct panel_desc innolux_g070y2_t02 = {
 static const struct display_timing innolux_g101ice_l01_timing = {
 	.pixelclock = { 60400000, 71100000, 74700000 },
 	.hactive = { 1280, 1280, 1280 },
-	.hfront_porch = { 41, 80, 100 },
-	.hback_porch = { 40, 79, 99 },
-	.hsync_len = { 1, 1, 1 },
+	.hfront_porch = { 30, 60, 70 },
+	.hback_porch = { 30, 60, 70 },
+	.hsync_len = { 22, 40, 60 },
 	.vactive = { 800, 800, 800 },
-	.vfront_porch = { 5, 11, 14 },
-	.vback_porch = { 4, 11, 14 },
-	.vsync_len = { 1, 1, 1 },
+	.vfront_porch = { 3, 8, 14 },
+	.vback_porch = { 3, 8, 14 },
+	.vsync_len = { 4, 7, 12 },
 	.flags = DISPLAY_FLAGS_DE_HIGH,
 };

@ -2402,6 +2402,7 @@ static const struct panel_desc innolux_g101ice_l01 = {
 		.disable = 200,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };

--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@ -247,14 +247,22 @@ static inline void vop_cfg_done(struct vop *vop)
 	VOP_REG_SET(vop, common, cfg_done, 1);
 }

-static bool has_rb_swapped(uint32_t format)
+static bool has_rb_swapped(uint32_t version, uint32_t format)
 {
 	switch (format) {
 	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ABGR8888:
-	case DRM_FORMAT_BGR888:
 	case DRM_FORMAT_BGR565:
 		return true;
+	/*
+	 * full framework (IP version 3.x) only need rb swapped for RGB888 and
+	 * little framework (IP version 2.x) only need rb swapped for BGR888,
+	 * check for 3.x to also only rb swap BGR888 for unknown vop version
+	 */
+	case DRM_FORMAT_RGB888:
+		return VOP_MAJOR(version) == 3;
+	case DRM_FORMAT_BGR888:
+		return VOP_MAJOR(version) != 3;
 	default:
 		return false;
 	}
@ -1030,7 +1038,7 @@ static void vop_plane_atomic_update(struct drm_plane *plane,
 	VOP_WIN_SET(vop, win, dsp_info, dsp_info);
 	VOP_WIN_SET(vop, win, dsp_st, dsp_st);

-	rb_swap = has_rb_swapped(fb->format->format);
+	rb_swap = has_rb_swapped(vop->data->version, fb->format->format);
 	VOP_WIN_SET(vop, win, rb_swap, rb_swap);

 	/*
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@ -345,6 +345,8 @@ static const struct apple_non_apple_keyboard non_apple_keyboards[] = {
 	{ "AONE" },
 	{ "GANSS" },
 	{ "Hailuck" },
+	{ "Jamesdonkey" },
+	{ "A3R" },
 };

 static bool apple_is_non_apple_keyboard(struct hid_device *hdev)
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@ -381,7 +381,7 @@ static int asus_raw_event(struct hid_device *hdev,
 	return 0;
 }

-static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+static int asus_kbd_set_report(struct hid_device *hdev, const u8 *buf, size_t buf_size)
 {
 	unsigned char *dmabuf;
 	int ret;
@ -404,7 +404,7 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size

 static int asus_kbd_init(struct hid_device *hdev)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
 		     0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
 	int ret;

@ -418,7 +418,7 @@ static int asus_kbd_init(struct hid_device *hdev)
 static int asus_kbd_get_functions(struct hid_device *hdev,
 				  unsigned char *kbd_func)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
 	u8 *readbuf;
 	int ret;

@ -449,7 +449,7 @@ static int asus_kbd_get_functions(struct hid_device *hdev,

 static int rog_nkey_led_init(struct hid_device *hdev)
 {
-	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+	const u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
 	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
 				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
 	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
@ -1000,6 +1000,24 @@ static int asus_start_multitouch(struct hid_device *hdev)
 	return 0;
 }

+static int __maybe_unused asus_resume(struct hid_device *hdev) {
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+	int ret = 0;
+
+	if (drvdata->kbd_backlight) {
+		const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4,
+				drvdata->kbd_backlight->cdev.brightness };
+		ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+		if (ret < 0) {
+			hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+			goto asus_resume_err;
+		}
+	}
+
+asus_resume_err:
+	return ret;
+}
+
 static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
 {
 	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
@ -1294,6 +1312,7 @@ static struct hid_driver asus_driver = {
 	.input_configured       = asus_input_configured,
 #ifdef CONFIG_PM
 	.reset_resume           = asus_reset_resume,
+	.resume					= asus_resume,
 #endif
 	.event			= asus_event,
 	.raw_event		= asus_raw_event
--- a/Show More
+++ b/Show More