Kconfig: consolidate the "Kernel hacking" menu

Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig.  For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.

Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Kconfig

@@ -30,3 +30,5 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
+
+source "lib/Kconfig.debug"

arch/alpha/Kconfig

@@ -710,8 +710,6 @@ config SRM_ENV
 
 endmenu
 
-source "arch/alpha/Kconfig.debug"
-
 # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
 # but we also need it if VGA_HOSE is set
 config DUMMY_CONSOLE

arch/alpha/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
 	bool
@@ -39,5 +36,3 @@ config MATHEMU
 	  This option is required for IEEE compliant floating point arithmetic
 	  on the Alpha. The only time you would ever not say Y is to say M in
 	  order to debug the code. Say Y unless you know what you are doing.
-
-endmenu

arch/arc/Kconfig

@@ -574,5 +574,4 @@ source "drivers/pci/Kconfig"
 
 endmenu
 
-source "arch/arc/Kconfig.debug"
 source "kernel/power/Kconfig"

arch/arc/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config 16KSTACKS
 	bool "Use 16Kb for kernel stacks instead of 8Kb"
@@ -11,5 +8,3 @@ config 16KSTACKS
 	  This increases the resident kernel footprint and will cause less
 	  threads to run on the system and also increase the pressure
 	  on the VM subsystem for higher order allocations.
-
-endmenu

arch/arm/Kconfig

@@ -2191,8 +2191,6 @@ endmenu
 
 source "drivers/firmware/Kconfig"
 
-source "arch/arm/Kconfig.debug"
-
 if CRYPTO
 source "arch/arm/crypto/Kconfig"
 endif

arch/arm/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config ARM_PTDUMP_CORE
 	def_bool n
@@ -1863,5 +1860,3 @@ config PID_IN_CONTEXTIDR
 	  are planning to use hardware trace tools with this kernel.
 
 source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu

arch/arm64/Kconfig

@@ -1321,8 +1321,6 @@ source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
 
-source "arch/arm64/Kconfig.debug"
-
 if CRYPTO
 source "arch/arm64/crypto/Kconfig"
 endif

arch/arm64/Kconfig.debug

@@ -1,6 +1,3 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config ARM64_PTDUMP_CORE
 	def_bool n
@@ -97,5 +94,3 @@ config ARM64_RELOC_TEST
 	tristate "Relocation testing module"
 
 source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu

arch/c6x/Kconfig

@@ -115,18 +115,3 @@ source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 
 endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config ACCESS_CHECK
-	bool "Check the user pointer address"
-	default y
-	help
-	  Usually the pointer transfer from user space is checked to see if its
-	  address is in the kernel space.
-
-	  Say N here to disable that check to improve the performance.
-
-endmenu

arch/c6x/Kconfig.debug

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config ACCESS_CHECK
+	bool "Check the user pointer address"
+	default y
+	help
+	  Usually the pointer transfer from user space is checked to see if its
+	  address is in the kernel space.
+
+	  Say N here to disable that check to improve the performance.

arch/h8300/Kconfig

@@ -55,9 +55,3 @@ menu "Kernel Features"
 source "kernel/Kconfig.preempt"
 
 endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-endmenu

arch/h8300/Kconfig.debug

@@ -0,0 +1 @@
+# dummy file, do not delete

arch/hexagon/Kconfig

@@ -149,7 +149,3 @@ endchoice
 source "kernel/Kconfig.hz"
 
 endmenu
-
-menu "Kernel hacking"
-source "lib/Kconfig.debug"
-endmenu

arch/hexagon/Kconfig.debug

@@ -0,0 +1 @@
+# dummy file, do not delete

arch/ia64/Kconfig

@@ -576,5 +576,3 @@ config MSPEC
 	  If you have an ia64 and you want to enable memory special
 	  operations support (formerly known as fetchop), say Y here,
 	  otherwise say N.
-
-source "arch/ia64/Kconfig.debug"

arch/ia64/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 choice
 	prompt "Physical memory granularity"
@@ -56,5 +53,3 @@ config IA64_DEBUG_IRQ
 	  Selecting this option turns on bug checking for the IA-64 irq_save
 	  and restore instructions.  It's useful for tracking down spinlock
 	  problems, but slow!  If you're unsure, select N.
-
-endmenu

arch/m68k/Kconfig

@@ -147,5 +147,3 @@ endmenu
 endif
 
 source "arch/m68k/Kconfig.devices"
-
-source "arch/m68k/Kconfig.debug"

arch/m68k/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config BOOTPARAM
 	bool 'Compiled-in Kernel Boot Parameter'
@@ -51,5 +48,3 @@ config BDM_DISABLE
 	  Disable the ColdFire CPU's BDM signals.
 
 endif
-
-endmenu

arch/microblaze/Kconfig

@@ -285,5 +285,3 @@ config PCI_XILINX
 source "drivers/pci/Kconfig"
 
 endmenu
-
-source "arch/microblaze/Kconfig.debug"

arch/microblaze/Kconfig.debug

@@ -1,11 +1,5 @@
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 
-menu "Kernel hacking"
-
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
-
-source "lib/Kconfig.debug"
-
-endmenu

arch/mips/Kconfig

@@ -3195,6 +3195,4 @@ endmenu
 
 source "drivers/firmware/Kconfig"
 
-source "arch/mips/Kconfig.debug"
-
 source "arch/mips/kvm/Kconfig"

arch/mips/Kconfig.debug

@@ -1,12 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-source "lib/Kconfig.debug"
-
 config EARLY_PRINTK
 	bool "Early printk" if EXPERT
 	depends on SYS_HAS_EARLY_PRINTK
@@ -155,5 +152,3 @@ config MIPS_CPS_NS16550_SHIFT
 	  adjacent ns16550 registers in the system.
 
 endif # MIPS_CPS_NS16550_BOOL
-
-endmenu

arch/nds32/Kconfig

@@ -91,7 +91,3 @@ menu "Kernel Features"
 source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 endmenu
-
-menu "Kernel hacking"
-source "lib/Kconfig.debug"
-endmenu

arch/nds32/Kconfig.debug

@@ -0,0 +1 @@
+# dummy file, do not delete

arch/nios2/Kconfig

@@ -187,5 +187,3 @@ config NIOS2_IO_REGION_BASE
 	default "0xe0000000"
 
 endmenu
-
-source "arch/nios2/Kconfig.debug"

arch/nios2/Kconfig.debug

@@ -1,11 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-source "lib/Kconfig.debug"
-
 config DEBUG_STACK_USAGE
 	bool "Enable stack utilization instrumentation"
 	depends on DEBUG_KERNEL
@@ -24,5 +21,3 @@ config EARLY_PRINTK
 	  This is useful for kernel debugging when your machine crashes very
 	  early before the console code is initialized.
 	  You should normally say N here, unless you want to debug such a crash.
-
-endmenu

arch/openrisc/Kconfig

@@ -201,9 +201,3 @@ config OPENRISC_ESR_EXCEPTION_BUG_CHECK
 endmenu
 
 endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-endmenu

arch/openrisc/Kconfig.debug

@@ -0,0 +1 @@
+# dummy file, do not delete

arch/parisc/Kconfig

@@ -349,8 +349,6 @@ endmenu
 
 source "drivers/parisc/Kconfig"
 
-source "arch/parisc/Kconfig.debug"
-
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"

arch/parisc/Kconfig.debug

@@ -1,9 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
-
-endmenu

arch/powerpc/Kconfig

@@ -1194,8 +1194,6 @@ endif
 config	ARCH_RANDOM
 	def_bool n
 
-source "arch/powerpc/Kconfig.debug"
-
 config PPC_LIB_RHEAP
 	bool
 

arch/powerpc/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config PPC_DISABLE_WERROR
 	bool "Don't build arch/powerpc code with -Werror"
@@ -379,5 +376,3 @@ config PPC_FAST_ENDIAN_SWITCH
         depends on DEBUG_KERNEL && PPC_BOOK3S_64
         help
 	  If you're unsure what this is, say N.
-
-endmenu

arch/riscv/Kconfig

@@ -245,48 +245,3 @@ menu "Power management options"
 source kernel/power/Kconfig
 
 endmenu
-
-menu "Kernel hacking"
-
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
-	help
-	  For most platforms, it is firmware or second stage bootloader
-	  that by default specifies the kernel command line options.
-	  However, it might be necessary or advantageous to either override
-	  the default kernel command line or add a few extra options to it.
-	  For such cases, this option allows hardcoding command line options
-	  directly into the kernel.
-
-	  For that, choose 'Y' here and fill in the extra boot parameters
-	  in CONFIG_CMDLINE.
-
-	  The built-in options will be concatenated to the default command
-	  line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
-	  command line will be ignored and replaced by the built-in string.
-
-config CMDLINE
-	string "Built-in kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
-	help
-	  Supply command-line options at build time by entering them here.
-
-config CMDLINE_FORCE
-	bool "Built-in command line overrides bootloader arguments"
-	depends on CMDLINE_BOOL
-	help
-	  Set this option to 'Y' to have the kernel ignore the bootloader
-	  or firmware command line.  Instead, the built-in command line
-	  will be used exclusively.
-
-	  If you don't know what to do here, say N.
-
-config EARLY_PRINTK
-	def_bool y
-
-source "lib/Kconfig.debug"
-
-config CMDLINE_BOOL
-	bool
-endmenu

arch/riscv/Kconfig.debug

@@ -0,0 +1,37 @@
+
+config CMDLINE_BOOL
+	bool "Built-in kernel command line"
+	help
+	  For most platforms, it is firmware or second stage bootloader
+	  that by default specifies the kernel command line options.
+	  However, it might be necessary or advantageous to either override
+	  the default kernel command line or add a few extra options to it.
+	  For such cases, this option allows hardcoding command line options
+	  directly into the kernel.
+
+	  For that, choose 'Y' here and fill in the extra boot parameters
+	  in CONFIG_CMDLINE.
+
+	  The built-in options will be concatenated to the default command
+	  line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
+	  command line will be ignored and replaced by the built-in string.
+
+config CMDLINE
+	string "Built-in kernel command string"
+	depends on CMDLINE_BOOL
+	default ""
+	help
+	  Supply command-line options at build time by entering them here.
+
+config CMDLINE_FORCE
+	bool "Built-in command line overrides bootloader arguments"
+	depends on CMDLINE_BOOL
+	help
+	  Set this option to 'Y' to have the kernel ignore the bootloader
+	  or firmware command line.  Instead, the built-in command line
+	  will be used exclusively.
+
+	  If you don't know what to do here, say N.
+
+config EARLY_PRINTK
+	def_bool y

arch/s390/Kconfig

@@ -828,8 +828,6 @@ config HAVE_PNETID
 	tristate
 	default (SMC || CCWGROUP)
 
-source "arch/s390/Kconfig.debug"
-
 menu "Virtualization"
 
 config PFAULT

arch/s390/Kconfig.debug

@@ -1,11 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-source "lib/Kconfig.debug"
-
 config S390_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
@@ -20,5 +17,3 @@ config S390_PTDUMP
 
 config EARLY_PRINTK
 	def_bool y
-
-endmenu

arch/sh/Kconfig

@@ -885,5 +885,3 @@ source "kernel/power/Kconfig"
 source "drivers/cpuidle/Kconfig"
 
 endmenu
-
-source "arch/sh/Kconfig.debug"

arch/sh/Kconfig.debug

@@ -1,11 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-source "lib/Kconfig.debug"
-
 config SH_STANDARD_BIOS
 	bool "Use LinuxSH standard BIOS"
 	depends on SUPERH32
@@ -88,5 +85,3 @@ config MCOUNT
 	def_bool y
 	depends on SUPERH32
 	depends on STACK_DEBUG || FUNCTION_TRACER
-
-endmenu

arch/sparc/Kconfig

@@ -565,5 +565,3 @@ config SYSVIPC_COMPAT
 	default y
 
 source "drivers/sbus/char/Kconfig"
-
-source "arch/sparc/Kconfig.debug"

arch/sparc/Kconfig.debug

@@ -1,12 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-source "lib/Kconfig.debug"
-
 config DEBUG_DCFLUSH
 	bool "D-cache flush debugging"
 	depends on SPARC64 && DEBUG_KERNEL
@@ -21,5 +18,3 @@ config FRAME_POINTER
 	bool
 	depends on MCOUNT
 	default y
-
-endmenu

arch/um/Kconfig

@@ -187,5 +187,3 @@ config SECCOMP
 endmenu
 
 source "arch/um/drivers/Kconfig"
-
-source "arch/um/Kconfig.debug"

arch/um/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config GPROF
 	bool "Enable gprof support"
@@ -37,5 +34,3 @@ config EARLY_PRINTK
 
 	  This is useful for kernel debugging when your machine crashes very
 	  early before the console code is initialized.
-
-endmenu

arch/unicore32/Kconfig

@@ -222,5 +222,3 @@ endmenu
 endif
 
 endif
-
-source "arch/unicore32/Kconfig.debug"

arch/unicore32/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
 	def_bool DEBUG_OCD
@@ -30,5 +27,3 @@ config DEBUG_OCD
 	help
 	  Say Y here if you want the debug print routines to direct their
 	  output to the UniCore On-Chip-Debugger channel using CP #1.
-
-endmenu

arch/x86/Kconfig

@@ -2931,6 +2931,4 @@ config HAVE_GENERIC_GUP
 
 source "drivers/firmware/Kconfig"
 
-source "arch/x86/Kconfig.debug"
-
 source "arch/x86/kvm/Kconfig"

arch/x86/Kconfig.debug

@@ -1,11 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-source "lib/Kconfig.debug"
-
 config EARLY_PRINTK_USB
 	bool
 
@@ -410,5 +407,3 @@ endchoice
 config FRAME_POINTER
 	depends on !UNWINDER_ORC && !UNWINDER_GUESS
 	bool
-
-endmenu

arch/xtensa/Kconfig

@@ -567,5 +567,3 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 endmenu
-
-source "arch/xtensa/Kconfig.debug"

arch/xtensa/Kconfig.debug

@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config DEBUG_TLB_SANITY
 	bool "Debug TLB sanity"
@@ -34,5 +31,3 @@ config S32C1I_SELFTEST
 	  It is easy to make wrong hardware configuration, this test should catch it early.
 
 	  Say 'N' on stable hardware.
-
-endmenu

lib/Kconfig.debug

@@ -1,3 +1,5 @@
+menu "Kernel hacking"
+
 menu "printk and dmesg options"
 
 config PRINTK_TIME
@@ -2034,3 +2036,7 @@ config IO_STRICT_DEVMEM
 	  if the driver using a given range cannot be disabled.
 
 	  If in doubt, say Y.
+
+source "arch/$(SRCARCH)/Kconfig.debug"
+
+endmenu # Kernel hacking