diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig index 75ac7e7c31ae..745587751070 100644 --- a/drivers/phy/realtek/Kconfig +++ b/drivers/phy/realtek/Kconfig @@ -17,16 +17,4 @@ config PHY_RTK_RTD_USB2PHY DWC3 USB IP. This driver will do the PHY initialization of the parameters. -config PHY_RTK_RTD_USB3PHY - tristate "Realtek RTD USB3 PHY Transceiver Driver" - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select USB_COMMON - help - Enable this to support Realtek SoC USB3 phy transceiver. - The DHC (digital home center) RTD series SoCs used the Synopsys - DWC3 USB IP. This driver will do the PHY initialization - of the parameters. - endif # ARCH_REALTEK || COMPILE_TEST diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile index ed7b47ff8a26..cf5d440841a2 100644 --- a/drivers/phy/realtek/Makefile +++ b/drivers/phy/realtek/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o -obj-$(CONFIG_PHY_RTK_RTD_USB3PHY) += phy-rtk-usb3.o diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c deleted file mode 100644 index 67446a85e968..000000000000 --- a/drivers/phy/realtek/phy-rtk-usb3.c +++ /dev/null @@ -1,761 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * phy-rtk-usb3.c RTK usb3.0 phy driver - * - * copyright (c) 2023 realtek semiconductor corporation - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define USB_MDIO_CTRL_PHY_BUSY BIT(7) -#define USB_MDIO_CTRL_PHY_WRITE BIT(0) -#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8 -#define USB_MDIO_CTRL_PHY_DATA_SHIFT 16 - -#define MAX_USB_PHY_DATA_SIZE 0x30 -#define PHY_ADDR_0X09 0x09 -#define PHY_ADDR_0X0B 0x0b -#define PHY_ADDR_0X0D 0x0d -#define PHY_ADDR_0X10 0x10 -#define PHY_ADDR_0X1F 0x1f -#define PHY_ADDR_0X20 0x20 -#define PHY_ADDR_0X21 0x21 -#define PHY_ADDR_0X30 0x30 - -#define REG_0X09_FORCE_CALIBRATION BIT(9) -#define REG_0X0B_RX_OFFSET_RANGE_MASK 0xc -#define REG_0X0D_RX_DEBUG_TEST_EN BIT(6) -#define REG_0X10_DEBUG_MODE_SETTING 0x3c0 -#define REG_0X10_DEBUG_MODE_SETTING_MASK 0x3f8 -#define REG_0X1F_RX_OFFSET_CODE_MASK 0x1e - -#define USB_U3_TX_LFPS_SWING_TRIM_SHIFT 4 -#define USB_U3_TX_LFPS_SWING_TRIM_MASK 0xf -#define AMPLITUDE_CONTROL_COARSE_MASK 0xff -#define AMPLITUDE_CONTROL_FINE_MASK 0xffff -#define AMPLITUDE_CONTROL_COARSE_DEFAULT 0xff -#define AMPLITUDE_CONTROL_FINE_DEFAULT 0xffff - -#define PHY_ADDR_MAP_ARRAY_INDEX(addr) (addr) -#define ARRAY_INDEX_MAP_PHY_ADDR(index) (index) - -struct phy_reg { - void __iomem *reg_mdio_ctl; -}; - -struct phy_data { - u8 addr; - u16 data; -}; - -struct phy_cfg { - int param_size; - struct phy_data param[MAX_USB_PHY_DATA_SIZE]; - - bool check_efuse; - bool do_toggle; - bool do_toggle_once; - bool use_default_parameter; - bool check_rx_front_end_offset; -}; - -struct phy_parameter { - struct phy_reg phy_reg; - - /* Get from efuse */ - u8 efuse_usb_u3_tx_lfps_swing_trim; - - /* Get from dts */ - u32 amplitude_control_coarse; - u32 amplitude_control_fine; -}; - -struct rtk_phy { - struct usb_phy phy; - struct device *dev; - - struct phy_cfg *phy_cfg; - int num_phy; - struct phy_parameter *phy_parameter; - - struct dentry *debug_dir; -}; - -#define PHY_IO_TIMEOUT_USEC (50000) -#define PHY_IO_DELAY_US (100) - -static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - int ret; - unsigned int val; - - ret = read_poll_timeout(readl, val, ((val & mask) == result), - PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); - if (ret) { - pr_err("%s can't program USB phy\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -static int rtk_phy3_wait_vbusy(struct phy_reg *phy_reg) -{ - return utmi_wait_register(phy_reg->reg_mdio_ctl, USB_MDIO_CTRL_PHY_BUSY, 0); -} - -static u16 rtk_phy_read(struct phy_reg *phy_reg, char addr) -{ - unsigned int tmp; - u32 value; - - tmp = (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT); - - writel(tmp, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - value = readl(phy_reg->reg_mdio_ctl); - value = value >> USB_MDIO_CTRL_PHY_DATA_SHIFT; - - return (u16)value; -} - -static int rtk_phy_write(struct phy_reg *phy_reg, char addr, u16 data) -{ - unsigned int val; - - val = USB_MDIO_CTRL_PHY_WRITE | - (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT) | - (data << USB_MDIO_CTRL_PHY_DATA_SHIFT); - - writel(val, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - return 0; -} - -static void do_rtk_usb3_phy_toggle(struct rtk_phy *rtk_phy, int index, bool connect) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - struct phy_data *phy_data; - u8 addr; - u16 data; - int i; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (!phy_cfg->do_toggle) - return; - - i = PHY_ADDR_MAP_ARRAY_INDEX(PHY_ADDR_0X09); - phy_data = phy_cfg->param + i; - addr = phy_data->addr; - data = phy_data->data; - - if (!addr && !data) { - addr = PHY_ADDR_0X09; - data = rtk_phy_read(phy_reg, addr); - phy_data->addr = addr; - phy_data->data = data; - } - - rtk_phy_write(phy_reg, addr, data & (~REG_0X09_FORCE_CALIBRATION)); - mdelay(1); - rtk_phy_write(phy_reg, addr, data | REG_0X09_FORCE_CALIBRATION); -} - -static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - int i = 0; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (phy_cfg->use_default_parameter) - goto do_toggle; - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = phy_data->addr; - u16 data = phy_data->data; - - if (!addr && !data) - continue; - - rtk_phy_write(phy_reg, addr, data); - } - -do_toggle: - if (phy_cfg->do_toggle_once) - phy_cfg->do_toggle = true; - - do_rtk_usb3_phy_toggle(rtk_phy, index, false); - - if (phy_cfg->do_toggle_once) { - u16 check_value = 0; - int count = 10; - u16 value_0x0d, value_0x10; - - /* Enable Debug mode by set 0x0D and 0x10 */ - value_0x0d = rtk_phy_read(phy_reg, PHY_ADDR_0X0D); - value_0x10 = rtk_phy_read(phy_reg, PHY_ADDR_0X10); - - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, - value_0x0d | REG_0X0D_RX_DEBUG_TEST_EN); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, - (value_0x10 & ~REG_0X10_DEBUG_MODE_SETTING_MASK) | - REG_0X10_DEBUG_MODE_SETTING); - - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - - while (!(check_value & BIT(15))) { - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - mdelay(1); - if (count-- < 0) - break; - } - - if (!(check_value & BIT(15))) - dev_info(rtk_phy->dev, "toggle fail addr=0x%02x, data=0x%04x\n", - PHY_ADDR_0X30, check_value); - - /* Disable Debug mode by set 0x0D and 0x10 to default*/ - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, value_0x0d); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, value_0x10); - - phy_cfg->do_toggle = false; - } - - if (phy_cfg->check_rx_front_end_offset) { - u16 rx_offset_code, rx_offset_range; - u16 code_mask = REG_0X1F_RX_OFFSET_CODE_MASK; - u16 range_mask = REG_0X0B_RX_OFFSET_RANGE_MASK; - bool do_update = false; - - rx_offset_code = rtk_phy_read(phy_reg, PHY_ADDR_0X1F); - if (((rx_offset_code & code_mask) == 0x0) || - ((rx_offset_code & code_mask) == code_mask)) - do_update = true; - - rx_offset_range = rtk_phy_read(phy_reg, PHY_ADDR_0X0B); - if (((rx_offset_range & range_mask) == range_mask) && do_update) { - dev_warn(rtk_phy->dev, "Don't update rx_offset_range (rx_offset_code=0x%x, rx_offset_range=0x%x)\n", - rx_offset_code, rx_offset_range); - do_update = false; - } - - if (do_update) { - u16 tmp1, tmp2; - - tmp1 = rx_offset_range & (~range_mask); - tmp2 = rx_offset_range & range_mask; - tmp2 += (1 << 2); - rx_offset_range = tmp1 | (tmp2 & range_mask); - rtk_phy_write(phy_reg, PHY_ADDR_0X0B, rx_offset_range); - goto do_toggle; - } - } - - return 0; -} - -static int rtk_phy_init(struct phy *phy) -{ - struct rtk_phy *rtk_phy = phy_get_drvdata(phy); - int ret = 0; - int i; - unsigned long phy_init_time = jiffies; - - for (i = 0; i < rtk_phy->num_phy; i++) - ret = do_rtk_phy_init(rtk_phy, i); - - dev_dbg(rtk_phy->dev, "Initialized RTK USB 3.0 PHY (take %dms)\n", - jiffies_to_msecs(jiffies - phy_init_time)); - - return ret; -} - -static int rtk_phy_exit(struct phy *phy) -{ - return 0; -} - -static const struct phy_ops ops = { - .init = rtk_phy_init, - .exit = rtk_phy_exit, - .owner = THIS_MODULE, -}; - -static void rtk_phy_toggle(struct usb_phy *usb3_phy, bool connect, int port) -{ - int index = port; - struct rtk_phy *rtk_phy = NULL; - - rtk_phy = dev_get_drvdata(usb3_phy->dev); - - if (index > rtk_phy->num_phy) { - dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", - __func__, index, rtk_phy->num_phy); - return; - } - - do_rtk_usb3_phy_toggle(rtk_phy, index, connect); -} - -static int rtk_phy_notify_port_status(struct usb_phy *x, int port, - u16 portstatus, u16 portchange) -{ - bool connect = false; - - pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n", - __func__, port, (int)portstatus, (int)portchange); - if (portstatus & USB_PORT_STAT_CONNECTION) - connect = true; - - if (portchange & USB_PORT_STAT_C_CONNECTION) - rtk_phy_toggle(x, connect, port); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static struct dentry *create_phy_debug_root(void) -{ - struct dentry *phy_debug_root; - - phy_debug_root = debugfs_lookup("phy", usb_debug_root); - if (!phy_debug_root) - phy_debug_root = debugfs_create_dir("phy", usb_debug_root); - - return phy_debug_root; -} - -static int rtk_usb3_parameter_show(struct seq_file *s, void *unused) -{ - struct rtk_phy *rtk_phy = s->private; - struct phy_cfg *phy_cfg; - int i, index; - - phy_cfg = rtk_phy->phy_cfg; - - seq_puts(s, "Property:\n"); - seq_printf(s, " check_efuse: %s\n", - phy_cfg->check_efuse ? "Enable" : "Disable"); - seq_printf(s, " do_toggle: %s\n", - phy_cfg->do_toggle ? "Enable" : "Disable"); - seq_printf(s, " do_toggle_once: %s\n", - phy_cfg->do_toggle_once ? "Enable" : "Disable"); - seq_printf(s, " use_default_parameter: %s\n", - phy_cfg->use_default_parameter ? "Enable" : "Disable"); - - for (index = 0; index < rtk_phy->num_phy; index++) { - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - seq_printf(s, "PHY %d:\n", index); - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = ARRAY_INDEX_MAP_PHY_ADDR(i); - u16 data = phy_data->data; - - if (!phy_data->addr && !data) - seq_printf(s, " addr = 0x%02x, data = none ==> read value = 0x%04x\n", - addr, rtk_phy_read(phy_reg, addr)); - else - seq_printf(s, " addr = 0x%02x, data = 0x%04x ==> read value = 0x%04x\n", - addr, data, rtk_phy_read(phy_reg, addr)); - } - - seq_puts(s, "PHY Property:\n"); - seq_printf(s, " efuse_usb_u3_tx_lfps_swing_trim: 0x%x\n", - (int)phy_parameter->efuse_usb_u3_tx_lfps_swing_trim); - seq_printf(s, " amplitude_control_coarse: 0x%x\n", - (int)phy_parameter->amplitude_control_coarse); - seq_printf(s, " amplitude_control_fine: 0x%x\n", - (int)phy_parameter->amplitude_control_fine); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(rtk_usb3_parameter); - -static inline void create_debug_files(struct rtk_phy *rtk_phy) -{ - struct dentry *phy_debug_root = NULL; - - phy_debug_root = create_phy_debug_root(); - - if (!phy_debug_root) - return; - - rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); - - debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb3_parameter_fops); - - return; -} - -static inline void remove_debug_files(struct rtk_phy *rtk_phy) -{ - debugfs_remove_recursive(rtk_phy->debug_dir); -} -#else -static inline void create_debug_files(struct rtk_phy *rtk_phy) { } -static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } -#endif /* CONFIG_DEBUG_FS */ - -static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, int index) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - u8 value = 0; - struct nvmem_cell *cell; - - if (!phy_cfg->check_efuse) - goto out; - - cell = nvmem_cell_get(rtk_phy->dev, "usb_u3_tx_lfps_swing_trim"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb_u3_tx_lfps_swing_trim: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & USB_U3_TX_LFPS_SWING_TRIM_MASK; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (value > 0 && value < 0x8) - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = 0x8; - else - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = (u8)value; - -out: - return 0; -} - -static void update_amplitude_control_value(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_reg = &phy_parameter->phy_reg; - phy_cfg = rtk_phy->phy_cfg; - - if (phy_parameter->amplitude_control_coarse != AMPLITUDE_CONTROL_COARSE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_COARSE_MASK; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= (~val_mask); - data |= (phy_parameter->amplitude_control_coarse & val_mask); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->efuse_usb_u3_tx_lfps_swing_trim) { - u8 efuse_val = phy_parameter->efuse_usb_u3_tx_lfps_swing_trim; - u16 val_mask = USB_U3_TX_LFPS_SWING_TRIM_MASK; - int val_shift = USB_U3_TX_LFPS_SWING_TRIM_SHIFT; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= ~(val_mask << val_shift); - data |= ((efuse_val & val_mask) << val_shift); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->amplitude_control_fine != AMPLITUDE_CONTROL_FINE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_FINE_MASK; - - if (!phy_cfg->param[PHY_ADDR_0X21].addr && !phy_cfg->param[PHY_ADDR_0X21].data) - phy_cfg->param[PHY_ADDR_0X21].addr = PHY_ADDR_0X21; - - phy_cfg->param[PHY_ADDR_0X21].data = - phy_parameter->amplitude_control_fine & val_mask; - } -} - -static int parse_phy_data(struct rtk_phy *rtk_phy) -{ - struct device *dev = rtk_phy->dev; - struct phy_parameter *phy_parameter; - int ret = 0; - int index; - - rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * - rtk_phy->num_phy, GFP_KERNEL); - if (!rtk_phy->phy_parameter) - return -ENOMEM; - - for (index = 0; index < rtk_phy->num_phy; index++) { - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - - phy_parameter->phy_reg.reg_mdio_ctl = of_iomap(dev->of_node, 0) + index; - - /* Amplitude control address 0x20 bit 0 to bit 7 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-coarse-tuning", - &phy_parameter->amplitude_control_coarse)) - phy_parameter->amplitude_control_coarse = AMPLITUDE_CONTROL_COARSE_DEFAULT; - - /* Amplitude control address 0x21 bit 0 to bit 16 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-fine-tuning", - &phy_parameter->amplitude_control_fine)) - phy_parameter->amplitude_control_fine = AMPLITUDE_CONTROL_FINE_DEFAULT; - - get_phy_data_by_efuse(rtk_phy, phy_parameter, index); - - update_amplitude_control_value(rtk_phy, phy_parameter); - } - - return ret; -} - -static int rtk_usb3phy_probe(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy; - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct phy_provider *phy_provider; - const struct phy_cfg *phy_cfg; - int ret; - - phy_cfg = of_device_get_match_data(dev); - if (!phy_cfg) { - dev_err(dev, "phy config are not assigned!\n"); - return -EINVAL; - } - - rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); - if (!rtk_phy) - return -ENOMEM; - - rtk_phy->dev = &pdev->dev; - rtk_phy->phy.dev = rtk_phy->dev; - rtk_phy->phy.label = "rtk-usb3phy"; - rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status; - - rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); - - memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); - - rtk_phy->num_phy = 1; - - ret = parse_phy_data(rtk_phy); - if (ret) - goto err; - - platform_set_drvdata(pdev, rtk_phy); - - generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); - if (IS_ERR(generic_phy)) - return PTR_ERR(generic_phy); - - phy_set_drvdata(generic_phy, rtk_phy); - - phy_provider = devm_of_phy_provider_register(rtk_phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - ret = usb_add_phy_dev(&rtk_phy->phy); - if (ret) - goto err; - - create_debug_files(rtk_phy); - -err: - return ret; -} - -static void rtk_usb3phy_remove(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); - - remove_debug_files(rtk_phy); - - usb_remove_phy(&rtk_phy->phy); -} - -static const struct phy_cfg rtd1295_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [0] = {0x01, 0x4008}, [1] = {0x01, 0xe046}, - [2] = {0x02, 0x6046}, [3] = {0x03, 0x2779}, - [4] = {0x04, 0x72f5}, [5] = {0x05, 0x2ad3}, - [6] = {0x06, 0x000e}, [7] = {0x07, 0x2e00}, - [8] = {0x08, 0x3591}, [9] = {0x09, 0x525c}, - [10] = {0x0a, 0xa600}, [11] = {0x0b, 0xa904}, - [12] = {0x0c, 0xc000}, [13] = {0x0d, 0xef1c}, - [14] = {0x0e, 0x2000}, [15] = {0x0f, 0x0000}, - [16] = {0x10, 0x000c}, [17] = {0x11, 0x4c00}, - [18] = {0x12, 0xfc00}, [19] = {0x13, 0x0c81}, - [20] = {0x14, 0xde01}, [21] = {0x15, 0x0000}, - [22] = {0x16, 0x0000}, [23] = {0x17, 0x0000}, - [24] = {0x18, 0x0000}, [25] = {0x19, 0x4004}, - [26] = {0x1a, 0x1260}, [27] = {0x1b, 0xff00}, - [28] = {0x1c, 0xcb00}, [29] = {0x1d, 0xa03f}, - [30] = {0x1e, 0xc2e0}, [31] = {0x1f, 0x2807}, - [32] = {0x20, 0x947a}, [33] = {0x21, 0x88aa}, - [34] = {0x22, 0x0057}, [35] = {0x23, 0xab66}, - [36] = {0x24, 0x0800}, [37] = {0x25, 0x0000}, - [38] = {0x26, 0x040a}, [39] = {0x27, 0x01d6}, - [40] = {0x28, 0xf8c2}, [41] = {0x29, 0x3080}, - [42] = {0x2a, 0x3082}, [43] = {0x2b, 0x2078}, - [44] = {0x2c, 0xffff}, [45] = {0x2d, 0xffff}, - [46] = {0x2e, 0x0000}, [47] = {0x2f, 0x0040}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [8] = {0x08, 0x3591}, - [38] = {0x26, 0x840b}, - [40] = {0x28, 0xf842}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac86}, - [6] = {0x06, 0x0003}, - [9] = {0x09, 0x924c}, - [10] = {0x0a, 0xa608}, - [11] = {0x0b, 0xb905}, - [14] = {0x0e, 0x2010}, - [32] = {0x20, 0x705a}, - [33] = {0x21, 0xf645}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xcb66}, - [41] = {0x29, 0xff00}, }, - .check_efuse = true, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619b_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac8c}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x724c}, - [10] = {0x0a, 0xb610}, - [11] = {0x0b, 0xb90d}, - [13] = {0x0d, 0xef2a}, - [15] = {0x0f, 0x9050}, - [16] = {0x10, 0x000c}, - [32] = {0x20, 0x70ff}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xdb66}, - [38] = {0x26, 0x8609}, - [41] = {0x29, 0xff13}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319d_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac89}, - [4] = {0x04, 0xf2f5}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x424c}, - [10] = {0x0a, 0x9610}, - [11] = {0x0b, 0x9901}, - [12] = {0x0c, 0xf000}, - [13] = {0x0d, 0xef2a}, - [14] = {0x0e, 0x1000}, - [15] = {0x0f, 0x9050}, - [32] = {0x20, 0x7077}, - [35] = {0x23, 0x0b62}, - [37] = {0x25, 0x10ec}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = true, -}; - -static const struct of_device_id usbphy_rtk_dt_match[] = { - { .compatible = "realtek,rtd1295-usb3phy", .data = &rtd1295_phy_cfg }, - { .compatible = "realtek,rtd1319-usb3phy", .data = &rtd1319_phy_cfg }, - { .compatible = "realtek,rtd1319d-usb3phy", .data = &rtd1319d_phy_cfg }, - { .compatible = "realtek,rtd1619-usb3phy", .data = &rtd1619_phy_cfg }, - { .compatible = "realtek,rtd1619b-usb3phy", .data = &rtd1619b_phy_cfg }, - {}, -}; -MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); - -static struct platform_driver rtk_usb3phy_driver = { - .probe = rtk_usb3phy_probe, - .remove_new = rtk_usb3phy_remove, - .driver = { - .name = "rtk-usb3phy", - .of_match_table = usbphy_rtk_dt_match, - }, -}; - -module_platform_driver(rtk_usb3phy_driver); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform: rtk-usb3phy"); -MODULE_AUTHOR("Stanley Chang "); -MODULE_DESCRIPTION("Realtek usb 3.0 phy driver");